Mouse Freezes in Xorg on ASUS P4C800 Deluxe
distro: Debian Unstable
kernels tested with: 2.6.13-rc3, 2.6.13-rc3-git5, 2.6.13-rc3-mm1 compiler used: Debian gcc-4.0.1-2
Xorg: Debian xorg-6.8.2-4
ASUS P4C800 Deluxe BIOS: 1019 (2005-11-08)
with or wihout ACPI enabled (acpi=off or not) the /dev/input/mice USB mouse freezes after not being used for some time and can only be awakened by switching to the text-console and back.
attached you can find all .configs, dmesg from 2.6.13-rc3-git5 and the xorg.conf.
Quoted 10 lines · cengizkirli
distro: Debian Unstable
kernels tested with: 2.6.13-rc3, 2.6.13-rc3-git5, 2.6.13-rc3-mm1 compiler used: Debian gcc-4.0.1-2
Xorg: Debian xorg-6.8.2-4
ASUS P4C800 Deluxe BIOS: 1019 (2005-11-08)with or wihout ACPI enabled (acpi=off or not) the
/dev/input/miceUSB mouse freezes after not being used for some time and can only be awakened by switching to the text-console and back.
What's the last kernel it works OK with?
Why do you suspect this to be a kernel problem and not a X.org problem?
Signature · 3 lines
Jesper Juhl <[email protected]> Don't top-post http://www.catb.org/~esr/jargon/html/T/top-post.html Plain text mails only, please http://www.expita.com/nomime.html
Quoted 7 lines · Jesper Juhl
Quoted 6 lines · cengizkirli
distro: Debian Unstable
kernels tested with: 2.6.13-rc3, 2.6.13-rc3-git5, 2.6.13-rc3-mm1 compiler used: Debian gcc-4.0.1-2
Xorg: Debian xorg-6.8.2-4
ASUS P4C800 Deluxe BIOS: 1019 (2005-11-08)
Quoted 5 lines
Quoted 4 lines
with or wihout ACPI enabled (acpi=off or not) the
/dev/input/miceUSB mouse freezes after not being used for some time and can only be awakened by switching to the text-console and back.What's the last kernel it works OK with?
none I can remember as I did not run linux that much on this box prior to last winter.
this also happened before the Debian Unstable Xorg switch and therefore with XFree86.
Quoted 1 line
Why do you suspect this to be a kernel problem and not a X.org problem?
because they told me in the Xorg IRC channel to believe in a kernel problem.
I've posted the original mail to [email protected], too.
It seems to work after comparing my .config with Andreas Baer's and also setting USB Support to "built-in" and not "module". Somehow the modules are unloaded or whatever. It seems to work now. Hopefully it will last...
Quoted 4 lines · cengizkirli
It seems to work after comparing my .config with Andreas Baer's and also setting USB Support to "built-in" and not "module". Somehow the modules are unloaded or whatever. It seems to work now. Hopefully it will last...
now I know why I set USB to "module": with USB "built-in" it does not reboot. on Debian it just prints "Rebooting..." and that's all that happens. hmm, maybe ACPI related, though with 2.6.13-rc3-mm2 I don't get the "executable code found" ACPI warnings anymore but who knows.
Quoted 11 lines · cengizkirli
Quoted 4 lines · cengizkirli
It seems to work after comparing my .config with Andreas Baer's and also setting USB Support to "built-in" and not "module". Somehow the modules are unloaded or whatever. It seems to work now. Hopefully it will last...
now I know why I set USB to "module": with USB "built-in" it does not reboot. on Debian it just prints "Rebooting..." and that's all that happens. hmm, maybe ACPI related, though with 2.6.13-rc3-mm2 I don't get the "executable code found" ACPI warnings anymore but who knows.
it works with the following config:
- USB as "Module" not "builtin" to prevent reboot problems
- no USB HID support selected
- USB mouse attached via USB_to_PS/2 adapter
ergo, please be careful with attaching a USB mouse to the USB port when you're forced to use one of those not-so-bugfree ASUS boards like P4C800 Deluxe.