Skip to contentSkip to conversation

md: call del_gendisk in sync way

PATCH Applied Xiao Ni 4 participants 11 messages Jun 11, 2025 – Jan 27 MD RAID

lore
Share & tools
lore

Xiao Ni

author
#0 lore raw

v6 cover md: call del_gendisk in sync way

Now del_gendisk is called in a queue work which has a small window that mdadm --stop command exits but the device node still exists. It causes trouble in regression tests. This patch set tries to resolve this problem.

v1: replace MD_DELETED with MD_CLOSING
v2: keep MD_CLOSING
v3: call den_gendisk in mddev_unlock, and remove ->to_remove in stop path and adjust the order of patches
v4: only remove the codes in stop path.
v5: remove sysfs_remove in md_kobj_release and change EBUSY with ENODEV
v6: don't initialize ret and add reviewed-by tag

Xiao Ni (3):
md: call del_gendisk in control path
md: Don't clear MD_CLOSING until mddev is freed
md: remove/add redundancy group only in level change

 drivers/md/md.c | 49 ++++++++++++++++++++++++++-----------------------
 drivers/md/md.h | 26 ++++++++++++++++++++++++--
 2 files changed, 50 insertions(+), 25 deletions(-)
Signature · 1 line
2.32.0 (Apple Git-132)
author
#1 lore raw

PATCH v6 1/3 md: call del_gendisk in control path

Now del_gendisk and put_disk are called asynchronously in workqueue work. The asynchronous way has a problem that the device node can still exist after mdadm --stop command returns in a short window. So udev rule can open this device node and create the struct mddev in kernel again. So put del_gendisk in control path and still leave put_disk in md_kobj_release to avoid uaf of gendisk.

Function del_gendisk can't be called with reconfig_mutex. If it's called with reconfig mutex, a deadlock can happen. del_gendisk waits all sysfs files access to finish and sysfs file access waits reconfig mutex. So put del_gendisk after releasing reconfig mutex.

But there is still a window that sysfs can be accessed between mddev_unlock and del_gendisk. So some actions (add disk, change level, .e.g) can happen which lead unexpected results. MD_DELETED is used to resolve this problem. MD_DELETED is set before releasing reconfig mutex and it should be checked for these sysfs access which need reconfig mutex. For sysfs access which don't need reconfig mutex, del_gendisk will wait them to finish.

But it doesn't need to do this in function mddev_lock_nointr. There are ten places that call it.
* Five of them are in dm raid which we don't need to care. MD_DELETED is only used for md raid.
* stop_sync_thread, md_do_sync and md_start_sync are related sync request, and it needs to wait sync thread to finish before stopping an array.
* md_ioctl: md_open is called before md_ioctl, so ->openers is added. It will fail to stop the array. So it doesn't need to check MD_DELETED here
* md_set_readonly:
It needs to call mddev_set_closing_and_sync_blockdev when setting readonly or read_auto. So it will fail to stop the array too because MD_CLOSING is already set.

---
 drivers/md/md.c | 33 +++++++++++++++++++++++----------
 drivers/md/md.h | 26 ++++++++++++++++++++++++--
 2 files changed, 47 insertions(+), 12 deletions(-)
drivers/md/md.c +23 -10
index 0f03b21e66e4..7445e44eabff 100644
@@ -636,9 +636,6 @@ static void __mddev_put(struct mddev *mddev)
 	    mddev->ctime || mddev->hold_active)
 		return;
 
-	/* Array is not configured at all, and not held active, so destroy it */
-	set_bit(MD_DELETED, &mddev->flags);
-
 	/*
 	 * Call queue_work inside the spinlock so that flush_workqueue() after
 	 * mddev_find will succeed in waiting for the work to be done.
@@ -873,6 +870,16 @@ void mddev_unlock(struct mddev *mddev)
 		kobject_del(&rdev->kobj);
 		export_rdev(rdev, mddev);
 	}
+
+	/* Call del_gendisk after release reconfig_mutex to avoid
+	 * deadlock (e.g. call del_gendisk under the lock and an
+	 * access to sysfs files waits the lock)
+	 * And MD_DELETED is only used for md raid which is set in
+	 * do_md_stop. dm raid only uses md_stop to stop. So dm raid
+	 * doesn't need to check MD_DELETED when getting reconfig lock
+	 */
+	if (test_bit(MD_DELETED, &mddev->flags))
+		del_gendisk(mddev->gendisk);
 }
 EXPORT_SYMBOL_GPL(mddev_unlock);
 
@@ -5774,19 +5781,30 @@ md_attr_store(struct kobject *kobj, struct attribute *attr,
 	struct md_sysfs_entry *entry = container_of(attr, struct md_sysfs_entry, attr);
 	struct mddev *mddev = container_of(kobj, struct mddev, kobj);
 	ssize_t rv;
+	struct kernfs_node *kn = NULL;
 
 	if (!entry->store)
 		return -EIO;
 	if (!capable(CAP_SYS_ADMIN))
 		return -EACCES;
+
+	if (entry->store == array_state_store && cmd_match(page, "clear"))
+		kn = sysfs_break_active_protection(kobj, attr);
+
 	spin_lock(&all_mddevs_lock);
 	if (!mddev_get(mddev)) {
 		spin_unlock(&all_mddevs_lock);
+		if (kn)
+			sysfs_unbreak_active_protection(kn);
 		return -EBUSY;
 	}
 	spin_unlock(&all_mddevs_lock);
 	rv = entry->store(mddev, page, length);
 	mddev_put(mddev);
+
+	if (kn)
+		sysfs_unbreak_active_protection(kn);
+
 	return rv;
 }
 
@@ -5794,12 +5812,6 @@ static void md_kobj_release(struct kobject *ko)
 {
 	struct mddev *mddev = container_of(ko, struct mddev, kobj);
 
-	if (mddev->sysfs_state)
-		sysfs_put(mddev->sysfs_state);
-	if (mddev->sysfs_level)
-		sysfs_put(mddev->sysfs_level);
-
-	del_gendisk(mddev->gendisk);
 	put_disk(mddev->gendisk);
 }
 
@@ -6646,8 +6658,9 @@ static int do_md_stop(struct mddev *mddev, int mode)
 		mddev->bitmap_info.offset = 0;
 
 		export_array(mddev);
-
 		md_clean(mddev);
+		set_bit(MD_DELETED, &mddev->flags);
+
 		if (mddev->hold_active == UNTIL_STOP)
 			mddev->hold_active = 0;
 	}
drivers/md/md.h +24 -2
index d45a9e6ead80..67b365621507 100644
@@ -700,11 +700,26 @@ static inline bool reshape_interrupted(struct mddev *mddev)
 
 static inline int __must_check mddev_lock(struct mddev *mddev)
 {
-	return mutex_lock_interruptible(&mddev->reconfig_mutex);
+	int ret;
+
+	ret = mutex_lock_interruptible(&mddev->reconfig_mutex);
+
+	/* MD_DELETED is set in do_md_stop with reconfig_mutex.
+	 * So check it here.
+	 */
+	if (!ret && test_bit(MD_DELETED, &mddev->flags)) {
+		ret = -ENODEV;
+		mutex_unlock(&mddev->reconfig_mutex);
+	}
+
+	return ret;
 }
 
 /* Sometimes we need to take the lock in a situation where
  * failure due to interrupts is not acceptable.
+ * It doesn't need to check MD_DELETED here, the owner which
+ * holds the lock here can't be stopped. And all paths can't
+ * call this function after do_md_stop.
  */
 static inline void mddev_lock_nointr(struct mddev *mddev)
 {
@@ -713,7 +728,14 @@ static inline void mddev_lock_nointr(struct mddev *mddev)
 
 static inline int mddev_trylock(struct mddev *mddev)
 {
-	return mutex_trylock(&mddev->reconfig_mutex);
+	int ret;
+
+	ret = mutex_trylock(&mddev->reconfig_mutex);
+	if (!ret && test_bit(MD_DELETED, &mddev->flags)) {
+		ret = -ENODEV;
+		mutex_unlock(&mddev->reconfig_mutex);
+	}
+	return ret;
 }
 extern void mddev_unlock(struct mddev *mddev);
 
Signature · 1 line
2.32.0 (Apple Git-132)
#2 lore raw

Re: [PATCH 1/3] md: call del_gendisk in control path

drivers/md/md.h static inline void mddev_lock_nointr(struct mddev *mddev) · line 739

Quoted 12 lines · Xiao Ni
  static inline int mddev_trylock(struct mddev *mddev)
  {
drivers/md/md.h +8 -1
-	return mutex_trylock(&mddev->reconfig_mutex);
+	int ret;
+
+	ret = mutex_trylock(&mddev->reconfig_mutex);
+	if (!ret && test_bit(MD_DELETED, &mddev->flags)) {
+		ret = -ENODEV;
+		mutex_unlock(&mddev->reconfig_mutex);
+	}
+	return ret;
  }

This change seems wrong to me. This change will cause mutex_unlock() to be called if mutex_trylock() *failed*. Additionally, returning -ENODEV from the failure path will cause the caller to call mutex_unlock() a second time if mutex_trylock() failed. Please fix this!

As a reminder, from include/linux/mutex.h:

/*
* NOTE: mutex_trylock() follows the spin_trylock() convention,
* not the down_trylock() convention!
*
* Returns 1 if the mutex has been acquired successfully, and 0 on
contention.
*/

Bart.

#3 lore raw

Re: [PATCH 1/3] md: call del_gendisk in control path

Hi,

Quoted 14 lines · Bart Van Assche
Quoted 4 lines · Xiao Ni

  static inline int mddev_trylock(struct mddev *mddev) {
-    return mutex_trylock(&mddev->reconfig_mutex); +    int ret;

Quoted 8 lines

+
+    ret = mutex_trylock(&mddev->reconfig_mutex); +    if (!ret && test_bit(MD_DELETED, &mddev->flags)) { +        ret = -ENODEV;
+        mutex_unlock(&mddev->reconfig_mutex); +    }
+    return ret;
  }

Quoted 4 lines

This change seems wrong to me. This change will cause mutex_unlock() to be called if mutex_trylock() *failed*. Additionally, returning -ENODEV from the failure path will cause the caller to call mutex_unlock() a second time if mutex_trylock() failed. Please fix this!

oops, this looks correct.

Just wonder why we didn't hit any strange bug with this, a try lock failure should be quite possible.

Quoted 13 lines

As a reminder, from include/linux/mutex.h:

/*
 * NOTE: mutex_trylock() follows the spin_trylock() convention, *       not the down_trylock() convention!
 *
 * Returns 1 if the mutex has been acquired successfully, and 0 on contention.
 */

Bart.

Signature · 2 lines
Thansk,
Kuai
author
#4 lore raw

PATCH v6 2/3 md: Don't clear MD_CLOSING until mddev is freed

In reply to Xiao Ni

UNTIL_STOP is used to avoid mddev is freed on the last close before adding disks to mddev. And it should be cleared when stopping an array which is mentioned in commit efeb53c0e572 ("md: Allow md devices to be created by name."). So reset ->hold_active to 0 in md_clean.

And MD_CLOSING should be kept until mddev is freed to avoid reopen.

---
 drivers/md/md.c | 16 ++++------------
 1 file changed, 4 insertions(+), 12 deletions(-)
drivers/md/md.c +4 -12
index 7445e44eabff..dde3d2bfd34d 100644
@@ -6425,15 +6425,10 @@ static void md_clean(struct mddev *mddev)
 	mddev->persistent = 0;
 	mddev->level = LEVEL_NONE;
 	mddev->clevel[0] = 0;
-	/*
-	 * Don't clear MD_CLOSING, or mddev can be opened again.
-	 * 'hold_active != 0' means mddev is still in the creation
-	 * process and will be used later.
-	 */
-	if (mddev->hold_active)
-		mddev->flags = 0;
-	else
-		mddev->flags &= BIT_ULL_MASK(MD_CLOSING);
+	/* if UNTIL_STOP is set, it's cleared here */
+	mddev->hold_active = 0;
+	/* Don't clear MD_CLOSING, or mddev can be opened again. */
+	mddev->flags &= BIT_ULL_MASK(MD_CLOSING);
 	mddev->sb_flags = 0;
 	mddev->ro = MD_RDWR;
 	mddev->metadata_type[0] = 0;
@@ -6660,9 +6655,6 @@ static int do_md_stop(struct mddev *mddev, int mode)
 		export_array(mddev);
 		md_clean(mddev);
 		set_bit(MD_DELETED, &mddev->flags);
-
-		if (mddev->hold_active == UNTIL_STOP)
-			mddev->hold_active = 0;
 	}
 	md_new_event();
 	sysfs_notify_dirent_safe(mddev->sysfs_state);
Signature · 1 line
2.32.0 (Apple Git-132)
author
#5 lore raw

PATCH v6 3/3 md: remove/add redundancy group only in level change

In reply to Xiao Ni

del_gendisk is called in synchronous way now. So it doesn't need to handle redundancy group in stop path separately.

---
 drivers/md/md.c | 2 --
 1 file changed, 2 deletions(-)
drivers/md/md.c +0 -2
index dde3d2bfd34d..7ae91155f2e4 100644
@@ -6523,8 +6523,6 @@ static void __md_stop(struct mddev *mddev)
 	if (mddev->private)
 		pers->free(mddev, mddev->private);
 	mddev->private = NULL;
-	if (pers->sync_request && mddev->to_remove == NULL)
-		mddev->to_remove = &md_redundancy_group;
 	put_pers(pers);
 	clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
 
Signature · 1 line
2.32.0 (Apple Git-132)
Applied
#6 lore raw
In reply to Xiao Ni
Quoted 13 lines · Xiao Ni

Now del_gendisk is called in a queue work which has a small window that mdadm --stop command exits but the device node still exists. It causes trouble in regression tests. This patch set tries to resolve this problem.

v1: replace MD_DELETED with MD_CLOSING
v2: keep MD_CLOSING
v3: call den_gendisk in mddev_unlock, and remove ->to_remove in stop path and adjust the order of patches
v4: only remove the codes in stop path.
v5: remove sysfs_remove in md_kobj_release and change EBUSY with ENODEV
v6: don't initialize ret and add reviewed-by tag

Quoted 9 lines

Xiao Ni (3):
md: call del_gendisk in control path
md: Don't clear MD_CLOSING until mddev is freed
md: remove/add redundancy group only in level change

  drivers/md/md.c | 49 ++++++++++++++++++++++++++-----------------------
  drivers/md/md.h | 26 ++++++++++++++++++++++++--
  2 files changed, 50 insertions(+), 25 deletions(-)

Applied to md-6.16

Thanks,
Kuai

#7 lore raw
In reply to Xiao Ni

Hi,

Quoted 13 lines · Xiao Ni

Now del_gendisk is called in a queue work which has a small window that mdadm --stop command exits but the device node still exists. It causes trouble in regression tests. This patch set tries to resolve this problem.

v1: replace MD_DELETED with MD_CLOSING
v2: keep MD_CLOSING
v3: call den_gendisk in mddev_unlock, and remove ->to_remove in stop path and adjust the order of patches
v4: only remove the codes in stop path.
v5: remove sysfs_remove in md_kobj_release and change EBUSY with ENODEV
v6: don't initialize ret and add reviewed-by tag

Quoted 9 lines

Xiao Ni (3):
md: call del_gendisk in control path
md: Don't clear MD_CLOSING until mddev is freed
md: remove/add redundancy group only in level change

  drivers/md/md.c | 49 ++++++++++++++++++++++++++-----------------------
  drivers/md/md.h | 26 ++++++++++++++++++++++++--
  2 files changed, 50 insertions(+), 25 deletions(-)

Just running mdadm tests with loop dev in my VM, and found this set can cause many tests to fail, the first is 02r5grow:

++ /usr/sbin/mdadm -A /dev/md0 /dev/loop1 /dev/loop2 /dev/loop3 ++ rv=1
++ case $* in
++ cat /var/tmp/stderr
mdadm: Unable to initialize sysfs
++ return 1
++ check state UUU
++ case $1 in
++ grep -sq 'blocks.*\[UUU\]$' /proc/mdstat
++ die 'state UUU not found!'
++ echo -e '\n\tERROR: state UUU not found! \n'

ERROR: state UUU not found!

++ save_log fail

I do not look into details yet.
Thanks

author
#8 lore raw
Quoted 42 lines · Yu Kuai

Hi,

Quoted 13 lines · Xiao Ni

Now del_gendisk is called in a queue work which has a small window that mdadm --stop command exits but the device node still exists. It causes trouble in regression tests. This patch set tries to resolve this problem.

v1: replace MD_DELETED with MD_CLOSING
v2: keep MD_CLOSING
v3: call den_gendisk in mddev_unlock, and remove ->to_remove in stop path and adjust the order of patches
v4: only remove the codes in stop path.
v5: remove sysfs_remove in md_kobj_release and change EBUSY with ENODEV
v6: don't initialize ret and add reviewed-by tag

Quoted 9 lines

Xiao Ni (3):
md: call del_gendisk in control path
md: Don't clear MD_CLOSING until mddev is freed
md: remove/add redundancy group only in level change

  drivers/md/md.c | 49 ++++++++++++++++++++++++++-----------------------
  drivers/md/md.h | 26 ++++++++++++++++++++++++--
  2 files changed, 50 insertions(+), 25 deletions(-)

Just running mdadm tests with loop dev in my VM, and found this set can cause many tests to fail, the first is 02r5grow:

++ /usr/sbin/mdadm -A /dev/md0 /dev/loop1 /dev/loop2 /dev/loop3 ++ rv=1
++ case $* in
++ cat /var/tmp/stderr
mdadm: Unable to initialize sysfs
++ return 1
++ check state UUU
++ case $1 in
++ grep -sq 'blocks.*\[UUU\]$' /proc/mdstat
++ die 'state UUU not found!'
++ echo -e '\n\tERROR: state UUU not found! \n'

Quoted 7 lines

ERROR: state UUU not found!

++ save_log fail

I do not look into details yet.
Thanks

Hi Kuai

You need to use the latest upstream mdadm code
https://github.com/md-raid-utilities/mdadm/

Regards
Xiao

#9 lore raw

Hi,

Quoted 47 lines · Xiao Ni
Quoted 46 lines · Yu Kuai

Hi,

Quoted 13 lines · Xiao Ni

Now del_gendisk is called in a queue work which has a small window that mdadm --stop command exits but the device node still exists. It causes trouble in regression tests. This patch set tries to resolve this problem.

v1: replace MD_DELETED with MD_CLOSING
v2: keep MD_CLOSING
v3: call den_gendisk in mddev_unlock, and remove ->to_remove in stop path and adjust the order of patches
v4: only remove the codes in stop path.
v5: remove sysfs_remove in md_kobj_release and change EBUSY with ENODEV
v6: don't initialize ret and add reviewed-by tag

Quoted 9 lines

Xiao Ni (3):
md: call del_gendisk in control path
md: Don't clear MD_CLOSING until mddev is freed
md: remove/add redundancy group only in level change

   drivers/md/md.c | 49 ++++++++++++++++++++++++++-----------------------
   drivers/md/md.h | 26 ++++++++++++++++++++++++--
   2 files changed, 50 insertions(+), 25 deletions(-)

Just running mdadm tests with loop dev in my VM, and found this set can cause many tests to fail, the first is 02r5grow:

++ /usr/sbin/mdadm -A /dev/md0 /dev/loop1 /dev/loop2 /dev/loop3 ++ rv=1
++ case $* in
++ cat /var/tmp/stderr
mdadm: Unable to initialize sysfs
++ return 1
++ check state UUU
++ case $1 in
++ grep -sq 'blocks.*\[UUU\]$' /proc/mdstat
++ die 'state UUU not found!'
++ echo -e '\n\tERROR: state UUU not found! \n'

ERROR: state UUU not found!

++ save_log fail

Quoted 9 lines
Quoted 3 lines

I do not look into details yet.
Thanks

Hi Kuai

You need to use the latest upstream mdadm code
https://github.com/md-raid-utilities/mdadm/

I use the repo from:
https://git.kernel.org/pub/scm/utils/mdadm/mdadm.git

With the latest commit:
8da27191 ("mdadm: enable sync file for udev rules")

Do we not update mdadm here?

I'll run the test soon, and BTW, wahy in the above commit, test can pass before this set?

Thanks,
Kuai

author
#10 lore raw
Quoted 64 lines · Yu Kuai

Hi,

Quoted 47 lines · Xiao Ni
Quoted 46 lines · Yu Kuai

Hi,

Quoted 13 lines · Xiao Ni

Now del_gendisk is called in a queue work which has a small window that mdadm --stop command exits but the device node still exists. It causes trouble in regression tests. This patch set tries to resolve this problem.

v1: replace MD_DELETED with MD_CLOSING
v2: keep MD_CLOSING
v3: call den_gendisk in mddev_unlock, and remove ->to_remove in stop path and adjust the order of patches
v4: only remove the codes in stop path.
v5: remove sysfs_remove in md_kobj_release and change EBUSY with ENODEV
v6: don't initialize ret and add reviewed-by tag

Quoted 9 lines

Xiao Ni (3):
md: call del_gendisk in control path
md: Don't clear MD_CLOSING until mddev is freed
md: remove/add redundancy group only in level change

   drivers/md/md.c | 49 ++++++++++++++++++++++++++-----------------------
   drivers/md/md.h | 26 ++++++++++++++++++++++++--
   2 files changed, 50 insertions(+), 25 deletions(-)

Just running mdadm tests with loop dev in my VM, and found this set can cause many tests to fail, the first is 02r5grow:

++ /usr/sbin/mdadm -A /dev/md0 /dev/loop1 /dev/loop2 /dev/loop3 ++ rv=1
++ case $* in
++ cat /var/tmp/stderr
mdadm: Unable to initialize sysfs
++ return 1
++ check state UUU
++ case $1 in
++ grep -sq 'blocks.*\[UUU\]$' /proc/mdstat
++ die 'state UUU not found!'
++ echo -e '\n\tERROR: state UUU not found! \n'

ERROR: state UUU not found!

++ save_log fail

Quoted 9 lines
Quoted 3 lines

I do not look into details yet.
Thanks

Hi Kuai

You need to use the latest upstream mdadm code
https://github.com/md-raid-utilities/mdadm/

I use the repo from:
https://git.kernel.org/pub/scm/utils/mdadm/mdadm.git

Quoted 7 lines

With the latest commit:
8da27191 ("mdadm: enable sync file for udev rules")

Do we not update mdadm here?

I'll run the test soon, and BTW, wahy in the above commit, test can pass before this set?

Hi Kuai

It doesn't have the patches which were submitted to github recently. I don't have the permission to sync from github to
https://git.kernel.org/pub/scm/utils/mdadm/mdadm.git

https://github.com/md-raid-utilities/mdadm/commit/ea4cdaea1a553685444a3fb39aae6b2cfee387ef
fixes the problem which can be introduced by this patch set.

Regards
Xiao

Quoted 4 lines

Thanks,
Kuai