Skip to contentSkip to conversation

net/mlx5e: Fix oops from ERR_PTR in act-miss restore teardown

PATCH In review Tariq Toukan 3 participants 3 messages Jun 11 – Jun 13

Subsystems (5)
lore
Share & tools
lore

Tariq Toukan

author maintainer
#0 lore raw

PATCH 1/1 net/mlx5e: Fix oops from ERR_PTR in act-miss restore teardown

From: Lama Kayal <[email protected]>

Restore-rule creation stores ERR_PTR(errno) in act_id_restore_rule on failure. Teardown still called mlx5_del_flow_rules() with that value, which dereferenced it like a real mlx5_flow_handle and could crash.

Clear act_id_restore_rule to NULL in the error branch after esw_add_restore_rule() fails so teardown only sees NULL or a valid handle.

Call Trace:
 ? page_fault+0x1e/0x30
 ? mlx5_del_flow_rules+0x12/0x140 [mlx5_core]
 mlx5e_tc_action_miss_mapping_put+0x49/0x50 [mlx5_core]
 mlx5_tc_ct_delete_flow+0x4d/0x70 [mlx5_core]
 mlx5_free_flow_attr_actions+0xd2/0x160 [mlx5_core]
 mlx5e_tc_del_fdb_flow+0x15d/0x210 [mlx5_core]
 mlx5e_flow_put+0x23/0x40 [mlx5_core]
 __mlx5e_add_fdb_flow+0xf3/0x430 [mlx5_core]
 mlx5e_tc_add_flow+0x2ab/0x9c0 [mlx5_core]
 mlx5e_configure_flower+0x2f4/0x620 [mlx5_core]
 tc_setup_cb_add+0xca/0x1e0
 fl_hw_replace_filter+0x143/0x1e0 [cls_flower]
 [...]
Fixes dfa1e46d6093 ("net/mlx5e: TC, Fix using eswitch mapping in nic mode")
---
 drivers/net/ethernet/mellanox/mlx5/core/en_tc.c | 1 +
 1 file changed, 1 insertion(+)
drivers/net/ethernet/mellanox/mlx5/core/en_tc.c +1 -0
index a9001d1c902f..4c135858f297 100644
@@ -5863,6 +5863,7 @@ int mlx5e_tc_action_miss_mapping_get(struct mlx5e_priv *priv, struct mlx5_flow_a
 	attr->act_id_restore_rule = esw_add_restore_rule(esw, *act_miss_mapping);
 	if (IS_ERR(attr->act_id_restore_rule)) {
 		err = PTR_ERR(attr->act_id_restore_rule);
+		attr->act_id_restore_rule = NULL;
 		goto err_rule;
 	}
 

base-commit: 0068940907d33217ae01217f84910a5cde606c17

Signature · 1 line
2.44.0
Reviewed-by on v1 1/1
#1 lore raw

From: Tariq Toukan <[email protected]>
Date: Thu, 11 Jun 2026 16:48:36 +0300

Quoted 26 lines

From: Lama Kayal <[email protected]>

Restore-rule creation stores ERR_PTR(errno) in act_id_restore_rule on failure. Teardown still called mlx5_del_flow_rules() with that value, which dereferenced it like a real mlx5_flow_handle and could crash.

Clear act_id_restore_rule to NULL in the error branch after esw_add_restore_rule() fails so teardown only sees NULL or a valid handle.

Call Trace:
 ? page_fault+0x1e/0x30
 ? mlx5_del_flow_rules+0x12/0x140 [mlx5_core]
 mlx5e_tc_action_miss_mapping_put+0x49/0x50 [mlx5_core]
 mlx5_tc_ct_delete_flow+0x4d/0x70 [mlx5_core]
 mlx5_free_flow_attr_actions+0xd2/0x160 [mlx5_core]
 mlx5e_tc_del_fdb_flow+0x15d/0x210 [mlx5_core]
 mlx5e_flow_put+0x23/0x40 [mlx5_core]
 __mlx5e_add_fdb_flow+0xf3/0x430 [mlx5_core]
 mlx5e_tc_add_flow+0x2ab/0x9c0 [mlx5_core]
 mlx5e_configure_flower+0x2f4/0x620 [mlx5_core]
 tc_setup_cb_add+0xca/0x1e0
 fl_hw_replace_filter+0x143/0x1e0 [cls_flower]
 [...]
Quoted 4 lines
Fixes dfa1e46d6093 ("net/mlx5e: TC, Fix using eswitch mapping in nic mode")

Thanks,
Olek

maintainer
#2 lore raw
In reply to Tariq Toukan

This is an AI-generated review of your patch. The human sending this email has considered the AI review valid, or at least plausible.
---
net/mlx5e: Fix oops from ERR_PTR in act-miss restore teardown

This change clears attr->act_id_restore_rule to NULL after esw_add_restore_rule() fails, so the teardown path no longer dereferences an ERR_PTR cookie as if it were a real mlx5_flow_handle.

drivers/net/ethernet/mellanox/mlx5/core/en_tc.c int mlx5e_tc_action_miss_mapping_get(struct mlx5e_priv *priv, struct mlx5_flow_a · line 5868

Quoted 11 lines
drivers/net/ethernet/mellanox/mlx5/core/en_tc.c +1 -0
index a9001d1c902f..4c135858f297 100644
@@ -5863,6 +5863,7 @@ int mlx5e_tc_action_miss_mapping_get(struct mlx5e_priv *priv, struct mlx5_flow_a
 	attr->act_id_restore_rule = esw_add_restore_rule(esw, *act_miss_mapping);
 	if (IS_ERR(attr->act_id_restore_rule)) {
 		err = PTR_ERR(attr->act_id_restore_rule);
+		attr->act_id_restore_rule = NULL;
 		goto err_rule;
 	}

[High]
The commit message states that after this change "teardown only sees NULL or a valid handle", framing NULL as benign. Is that invariant actually enforced on the consumer side?

Looking at the teardown helper:

drivers/net/ethernet/mellanox/mlx5/core/en_tc.c:mlx5e_tc_action_miss_mapping_put() {
    struct mapping_ctx *ctx = mlx5e_get_priv_obj_mapping(priv);

    if (is_mdev_switchdev_mode(priv->mdev))
        mlx5_del_flow_rules(attr->act_id_restore_rule);
    mapping_remove(ctx, act_miss_mapping);
}

There is no NULL check before mlx5_del_flow_rules(), and mlx5_del_flow_rules() itself dereferences handle->rule[0] without a NULL check:

drivers/net/ethernet/mellanox/mlx5/core/fs_core.c:mlx5_del_flow_rules() {
    struct fs_fte *fte;
    int i;
    ...
    fs_get_obj(fte, handle->rule[0]->node.parent);
    down_write_ref_node(&fte->node, false);
    ...
}

So on any path where mlx5e_tc_action_miss_mapping_put() is reached with attr->act_id_restore_rule == NULL in switchdev mode, this patch converts the original ERR_PTR dereference into a NULL dereference at the same site rather than avoiding the crash.

Today the put is gated by attr->ct_attr.offloaded in mlx5_tc_ct_delete_flow(), and __mlx5_tc_ct_flow_offload() leaves offloaded clear when mlx5e_tc_action_miss_mapping_get() fails, so the specific oops in the call trace should no longer be reachable. But should the put be made symmetric with the new "NULL or valid" producer contract, e.g.:

    if (is_mdev_switchdev_mode(priv->mdev) && attr->act_id_restore_rule)
        mlx5_del_flow_rules(attr->act_id_restore_rule);

so that any future caller that relies on the documented invariant (including mlx5e_clone_flow_attr_for_post_act() in en_tc.c, which already inherits this field) does not reintroduce the same oops with a slightly different fault address?

Signature · 1 line
pw-bot: cr