Skip to contentSkip to conversation

parser problem?

U-Boot-Users Andrew Dyer 2 participants 4 messages Jun 13, 2005 – Mar 12, 2006

lore
Share & tools
lore
#0 lore raw

I noticed on my board that if I enter a space and then return at the u-boot command line I get an exception. I using u-boot from cvs and the standard (not hush) parser on a mips platform.
Does anybody else see this behaviour?

Signature · 2 lines
Hardware, n.:
        The parts of a computer system that can be kicked.
#1 lore raw
Quoted 4 lines · In message <[email protected]> you wrote:

I noticed on my board that if I enter a space and then return at the u-boot command line I get an exception. I using u-boot from cvs and the standard (not hush) parser on a mips platform.
Does anybody else see this behaviour?

You should see a "Unknown command '<NULL>' - try 'help'" error message.

Best regards,

Wolfgang Denk

Signature · 4 lines
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
As in certain cults it is possible to kill a process if you know  its
true name.                      -- Ken Thompson and Dennis M. Ritchie
#2 lore raw

[U-Boot-Users] PATCH: fix parser problem with whitespace command line

Quoted 7 lines · Wolfgang Denk
Quoted 4 lines · In message <[email protected]> you wrote:

I noticed on my board that if I enter a space and then return at the u-boot command line I get an exception. I using u-boot from cvs and the standard (not hush) parser on a mips platform.
Does anybody else see this behaviour?

You should see a "Unknown command '<NULL>' - try 'help'" error message.

Did you try it?

I dug a bit more and what I found was that in run_command() the parse_line() function eats the leading whitespace then doesn't see anything it recognizes, so sets argv[0] to NULL and returns a zero. The null pointer gets passed to find_cmd() which happily dereferences it and the cpu throws an exception.

Below is the output of main with DEBUG_PARSER turned on (and a printf of argc and *argv I added before the call to find_cmd():

AMR boot#
[RUN_COMMAND] cmd[83ff8bc0]=" "
[PROCESS_SEPARATORS]
token: " "
[PROCESS_MACROS] INPUT len 1: " "
[PROCESS_MACROS] OUTPUT len 1: " "
parse_line: " "
parse_line: nargs=0
argc 0
*argv 0
Unhandled exception

$ 0   : 00000000 b1100000 00000000 00000004
$ 4   : 83ff2748 83eefb78 0000000a fffffffb
$ 8   : ffffffff 83eefb7e 00000002 00000000
$12   : 00000000 00000000 83ff6d10 00000020
$16   : 83eefcb8 00000000 83eefcb9 83eefdb8
$20   : 00000000 00000000 83eefeb8 00000001
$24   : 3afe5cff 83feff2c
$28   : 83ff8050 83eefca0 281925aa 83fdb130
Hi    : 00000001
Lo    : 00000000
epc   : 83fdb144 ra    : 83fdb130 Status: 00400002    KERNEL EXL
Cause : 00800008
BadVA : 00000000
PrId  : 03030200

Attached is a fix which checks if the value of argc is zero before calling find_cmd()
and continues.

CHANGELOG:
* Patch by Andrew Dyer, 13 June2005:
add test to see if no valid commands were found in input string before passing string
to find_cmd()

Signature · 6 lines
Hardware, n.:
        The parts of a computer system that can be kicked.
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: uboot-space-command.txt
Url: http://lists.denx.de/pipermail/u-boot/attachments/20050613/efe3a329/attachment.txt 
#3 lore raw

[U-Boot-Users] PATCH: fix parser problem with whitespace command line

Quoted 5 lines · In message <[email protected]> you wrote:

* Patch by Andrew Dyer, 13 June2005:
add test to see if no valid commands were found in input string before passing string
to find_cmd()

Added, thanks.

Best regards,

Wolfgang Denk

Signature · 3 lines
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"I didn't know it was impossible when I did it."