drm/i915: Use AUX for backlight only if eDP 1.4 or later
Subsystems (2)
PATCH 1/1 drm/i915: Use AUX for backlight only if eDP 1.4 or later
With older panels, AUX pin for backlight doesn't work. On some panels, this causes backlight issues on S3 resume. Enable the feature only for eDP1.4 or later.
--- drivers/gpu/drm/i915/intel_dp_aux_backlight.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
drivers/gpu/drm/i915/intel_dp_aux_backlight.c +5 -1
@@ -292,7 +292,7 @@ static int intel_dp_aux_setup_backlight(struct intel_connector *connector,* via PWM pin or using AUX is better than using PWM pin. * * The heuristic to determine that using AUX pin is better than using PWM pin is -* that the panel support any of the feature list here. +* that the panel is eDP 1.4 or later and support any of the feature list here * - Regional backlight brightness adjustment * - Backlight PWM frequency set * - More than 8 bits resolution of brightness level
@@ -310,6 +310,10 @@ static int intel_dp_aux_setup_backlight(struct intel_connector *connector,if (!(intel_dp->edp_dpcd[2 ] &DP_EDP_BACKLIGHT_BRIGHTNESS_PWM_PIN_CAP ))return true; +/* Enable this for eDP 1.4 panel or later. */ +if (intel_dp->edp_dpcd[0 ] <DP_EDP_14 ) +return false; +/* Panel supports regional backlight brightness adjustment */ if (drm_dp_dpcd_readb (&intel_dp->aux,DP_EDP_GENERAL_CAP_3 , ®_val) !=1 ) {
Signature · 6 lines
1.9.1 _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Patchwork
CI✓ Fi.CI.BAT: success for drm/i915: Use AUX for backlight only if eDP 1.4 or later
== Series Details ==
== Series Details ==
Series: drm/i915: Use AUX for backlight only if eDP 1.4 or later
URL : https://patchwork.freedesktop.org/series/27566/
State : success
== Summary ==
Series 27566v1 drm/i915: Use AUX for backlight only if eDP 1.4 or later
https://patchwork.freedesktop.org/api/1.0/series/27566/revisions/1/mbox/
Test kms_pipe_crc_basic:
Subgroup hang-read-crc-pipe-a:
dmesg-warn -> PASS (fi-pnv-d510) fdo#101597
Subgroup suspend-read-crc-pipe-b:
pass -> DMESG-WARN (fi-byt-j1900) fdo#101705fdo#101597 https://bugs.freedesktop.org/show_bug.cgi?id=101597
fdo#101705 https://bugs.freedesktop.org/show_bug.cgi?id=101705
fi-bdw-5557u total:279 pass:268 dwarn:0 dfail:0 fail:0 skip:11 time:441s fi-bdw-gvtdvm total:279 pass:265 dwarn:0 dfail:0 fail:0 skip:14 time:429s fi-blb-e6850 total:279 pass:224 dwarn:1 dfail:0 fail:0 skip:54 time:358s fi-bsw-n3050 total:279 pass:243 dwarn:0 dfail:0 fail:0 skip:36 time:546s fi-bxt-j4205 total:279 pass:260 dwarn:0 dfail:0 fail:0 skip:19 time:514s fi-byt-j1900 total:279 pass:254 dwarn:1 dfail:0 fail:0 skip:24 time:496s fi-byt-n2820 total:279 pass:250 dwarn:1 dfail:0 fail:0 skip:28 time:487s fi-glk-2a total:279 pass:260 dwarn:0 dfail:0 fail:0 skip:19 time:600s fi-hsw-4770 total:279 pass:263 dwarn:0 dfail:0 fail:0 skip:16 time:437s fi-hsw-4770r total:279 pass:263 dwarn:0 dfail:0 fail:0 skip:16 time:415s fi-ilk-650 total:279 pass:229 dwarn:0 dfail:0 fail:0 skip:50 time:418s fi-ivb-3520m total:279 pass:261 dwarn:0 dfail:0 fail:0 skip:18 time:501s fi-ivb-3770 total:279 pass:261 dwarn:0 dfail:0 fail:0 skip:18 time:471s fi-kbl-7500u total:279 pass:261 dwarn:0 dfail:0 fail:0 skip:18 time:469s fi-kbl-7560u total:279 pass:269 dwarn:0 dfail:0 fail:0 skip:10 time:577s fi-kbl-r total:279 pass:261 dwarn:0 dfail:0 fail:0 skip:18 time:578s fi-pnv-d510 total:279 pass:223 dwarn:1 dfail:0 fail:0 skip:55 time:558s fi-skl-6260u total:279 pass:269 dwarn:0 dfail:0 fail:0 skip:10 time:461s fi-skl-6700hq total:279 pass:262 dwarn:0 dfail:0 fail:0 skip:17 time:584s fi-skl-6700k total:279 pass:257 dwarn:4 dfail:0 fail:0 skip:18 time:471s fi-skl-6770hq total:279 pass:269 dwarn:0 dfail:0 fail:0 skip:10 time:474s fi-skl-gvtdvm total:279 pass:266 dwarn:0 dfail:0 fail:0 skip:13 time:434s fi-skl-x1585l total:279 pass:268 dwarn:0 dfail:0 fail:0 skip:11 time:471s fi-snb-2520m total:279 pass:251 dwarn:0 dfail:0 fail:0 skip:28 time:540s fi-snb-2600 total:279 pass:250 dwarn:0 dfail:0 fail:0 skip:29 time:403s
541e75cb2ac9f85388e9e6f228d98f266506eebd drm-tip: 2017y-07m-19d-10h-10m-36s UTC integration manifest b10d4f6 drm/i915: Use AUX for backlight only if eDP 1.4 or later
== Logs ==
For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/Patchwork_5232/
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 2 lines · Jenny TC
With older panels, AUX pin for backlight doesn't work. On some panels, this causes backlight issues on S3 resume.
What is it that we are missing in the resume path?
Quoted 2 lines
Enable the
feature only for eDP1.4 or later.
I can't find the eDP 1.4 requirement in the spec. Regional brightness control was added in eDP 1.4, but we don't enable that. My concern is we might be missing a real fix by ignoring < eDP 1.4 panels.
Quoted 2 lines
Fix-suggested-by Puthikorn Voravootivat <[email protected]>
1. Please use the "Fixes" tag to refer to the commit that introduced the code you are fixing.
2. The "Suggested-by" tag is more common to give credits to the person who suggested the fix.
3. Please use the "Bugzilla" tag to point to the bug that David reported.
Quoted 19 lines
Signed-off-by Jenny TC <[email protected]>--- drivers/gpu/drm/i915/intel_dp_aux_backlight.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)drivers/gpu/drm/i915/intel_dp_aux_backlight.c +1
-1@@ -292,7 +292,7 @@ static int intel_dp_aux_setup_backlight(struct intel_connector *connector,* via PWM pin or using AUX is better than using PWM pin. * * The heuristic to determine that using AUX pin is better than using PWM pin is -* that the panel support any of the feature list here. +* that the panel is eDP 1.4 or later and support any of the feature list here * - Regional backlight brightness adjustment * - Backlight PWM frequency set * - More than 8 bits resolution of brightness level
drivers/gpu/drm/i915/intel_dp_aux_backlight.c static int intel_dp_aux_setup_backlight(struct intel_connector *connector, · line 319
Quoted 10 lines
drivers/gpu/drm/i915/intel_dp_aux_backlight.c +4
-0@@ -310,6 +310,10 @@ static int intel_dp_aux_setup_backlight(struct intel_connector *connector,if (!(intel_dp->edp_dpcd[2 ] &DP_EDP_BACKLIGHT_BRIGHTNESS_PWM_PIN_CAP ))return true; +/* Enable this for eDP 1.4 panel or later. */ +if (intel_dp->edp_dpcd[0 ] <DP_EDP_14 ) +return false; +/* Panel supports regional backlight brightness adjustment */ if (drm_dp_dpcd_readb (&intel_dp->aux,DP_EDP_GENERAL_CAP_3 , ®_val) !=1 ) {
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Jani Nikula
maintainerQuoted 2 lines · Dhinakaran
Quoted 1 line · Jenny TC
With older panels, AUX pin for backlight doesn't work.
What evidence do you have to back up that claim?
Quoted 10 lines
Quoted 1 line
On some panels, this causes backlight issues on S3 resume.
What is it that we are missing in the resume path?
Quoted 2 lines
Enable the
feature only for eDP1.4 or later.I can't find the eDP 1.4 requirement in the spec. Regional brightness control was added in eDP 1.4, but we don't enable that. My concern is we might be missing a real fix by ignoring < eDP 1.4 panels.
Agreed.
This has been going on too long now, with no real effort to get at the roots of the problem. The right approach is to revert the regressing commits now, and start over. Reverts posted [1].
BR,
Jani.
[1] https://patchwork.freedesktop.org/series/27623/
Quoted 42 lines
Quoted 4 lines
Fix-suggested-by Puthikorn Voravootivat <[email protected]>1. Please use the "Fixes" tag to refer to the commit that introduced the code you are fixing.
2. The "Suggested-by" tag is more common to give credits to the person who suggested the fix.
3. Please use the "Bugzilla" tag to point to the bug that David reported.Quoted 29 lines
Signed-off-by Jenny TC <[email protected]>--- drivers/gpu/drm/i915/intel_dp_aux_backlight.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)drivers/gpu/drm/i915/intel_dp_aux_backlight.c +5
-1@@ -292,7 +292,7 @@ static int intel_dp_aux_setup_backlight(struct intel_connector *connector,* via PWM pin or using AUX is better than using PWM pin. * * The heuristic to determine that using AUX pin is better than using PWM pin is -* that the panel support any of the feature list here. +* that the panel is eDP 1.4 or later and support any of the feature list here * - Regional backlight brightness adjustment * - Backlight PWM frequency set * - More than 8 bits resolution of brightness level @@ -310,6 +310,10 @@ static int intel_dp_aux_setup_backlight(struct intel_connector *connector,if (!(intel_dp->edp_dpcd[2 ] &DP_EDP_BACKLIGHT_BRIGHTNESS_PWM_PIN_CAP ))return true; +/* Enable this for eDP 1.4 panel or later. */ +if (intel_dp->edp_dpcd[0 ] <DP_EDP_14 ) +return false; +/* Panel supports regional backlight brightness adjustment */ if (drm_dp_dpcd_readb (&intel_dp->aux,DP_EDP_GENERAL_CAP_3 , ®_val) !=1 ) {
Signature · 5 lines
Jani Nikula, Intel Open Source Technology Center _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 3 lines
Quoted 1 line
Quoted 1 line
With older panels, AUX pin for backlight doesn't work.
What evidence do you have to back up that claim?
Debugging further it's found that the panel I am having doesn't support AUX Backlight.
cat /sys/kernel/debug/dri/0/eDP-1/i915_dpcd
...
0701: bb ff 00 00
....
With below change its working for my panel. But doesn't address issue reported in
https://bugs.freedesktop.org/show_bug.cgi?id=101619 which seems to have a wrong DPCD data. Since we don't have a proper fix for all panels, I agree for revert.
intel_dp_aux_display_control_heuristic(struct intel_connector *connector)
struct intel_dp *intel_dp = enc_to_intel_dp(&connector->encoder->base);
uint8_t reg_val;+ /* Panel dosn't support enabling AUX Backlight control */
+ if (!(intel_dp->edp_dpcd[1] & DP_EDP_BACKLIGHT_AUX_ENABLE_CAP)) {
+ return false;
+ }
/* Panel doesn't support adjusting backlight brightness via PWN pin */
if (!(intel_dp->edp_dpcd[2] & DP_EDP_BACKLIGHT_BRIGHTNESS_PWM_PIN_CAP))
return true;Quoted 63 lines
Quoted 10 lines
Quoted 1 line
On some panels, this causes backlight issues on S3 resume.
What is it that we are missing in the resume path?
Quoted 2 lines
Enable the
feature only for eDP1.4 or later.I can't find the eDP 1.4 requirement in the spec. Regional brightness control was added in eDP 1.4, but we don't enable that. My concern is we might be missing a real fix by ignoring < eDP 1.4 panels.
Agreed.
This has been going on too long now, with no real effort to get at the roots of the problem. The right approach is to revert the regressing commits now, and start over. Reverts posted [1].
BR,
Jani.[1] https://patchwork.freedesktop.org/series/27623/
Quoted 18 lines
Quoted 4 lines
Fix-suggested-by Puthikorn Voravootivat <[email protected]>1. Please use the "Fixes" tag to refer to the commit that introduced the code you are fixing.
2. The "Suggested-by" tag is more common to give credits to the person who suggested the fix.
3. Please use the "Bugzilla" tag to point to the bug that David reported.Quoted 5 lines
Signed-off-by Jenny TC <[email protected]>--- drivers/gpu/drm/i915/intel_dp_aux_backlight.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)Quoted 6 lines
drivers/gpu/drm/i915/intel_dp_aux_backlight.c static int intel_dp_aux_setup_backlight(struct
Quoted 6 lines
drivers/gpu/drm/i915/intel_dp_aux_backlight.c +0
-0@@ -292,7 +292,7 @@ static int intel_dp_aux_setup_backlight(struct
intel_connector*connector,Quoted 11 lines
Quoted 11 lines
drivers/gpu/drm/i915/intel_dp_aux_backlight.c +0
-0* via PWM pin or using AUX is better than using PWM pin. * * The heuristic to determine that using AUX pin is better than using PWM pin is
- * that the panel support any of the feature list here.
+ * that the panel is eDP 1.4 or later and support any of the feature
+ list here
* - Regional backlight brightness adjustment
* - Backlight PWM frequency set
* - More than 8 bits resolution of brightness level @@ -310,6
+310,10 @@ static int intel_dp_aux_setup_backlight(struct
intel_connector*connector,Quoted 1 line
Quoted 1 line
if (!(intel_dp->edp_dpcd[2] &
DP_EDP_BACKLIGHT_BRIGHTNESS_PWM_PIN_CAP))Quoted 2 lines
Quoted 2 lines
return true;
Quoted 10 lines
Quoted 7 lines
drivers/gpu/drm/i915/intel_dp_aux_backlight.c static int intel_dp_aux_setup_backlight(struct intel_connector *connector, · line 319
Quoted 7 lines
drivers/gpu/drm/i915/intel_dp_aux_backlight.c +4
-0+/* Enable this for eDP 1.4 panel or later. */ +if (intel_dp->edp_dpcd[0 ] <DP_EDP_14 ) +return false; +/* Panel supports regional backlight brightness adjustment */ if (drm_dp_dpcd_readb (&intel_dp->aux,DP_EDP_GENERAL_CAP_3 , ®_val) !=1 ) {--
Jani Nikula, Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 19 lines · Jenny
Quoted 3 lines
Quoted 1 line
Quoted 1 line
With older panels, AUX pin for backlight doesn't work.
What evidence do you have to back up that claim?
Debugging further it's found that the panel I am having doesn't support AUX Backlight.
cat
/sys/kernel/debug/dri/0/eDP-1/i915_dpcd
...
0701: bb ff 00 00
....With below change its working for my panel. But doesn't address issue reported in
https://bugs.freedesktop.org/show_bug.cgi?id=101619 which seems to have a wrong DPCD data. Since we don't have a proper fix for all panels, I agree for revert.
intel_dp_aux_display_control_heuristic(struct intel_connector *connector)struct intel_dp *intel_dp = enc_to_intel_dp(&connector->encoder->base); uint8_t reg_val;
Review
Quoted 4 lines
(quoted diff) +4
-0+ /* Panel dosn't support enabling AUX Backlight control */ + if (!(intel_dp->edp_dpcd[1] & DP_EDP_BACKLIGHT_AUX_ENABLE_CAP)) { + return false; + }
AUX backlight brightness control should work even without AUX enable capability.
Quoted 77 lines
/* Panel doesn't support adjusting backlight brightness via PWN pin */ if (!(intel_dp->edp_dpcd[2] & DP_EDP_BACKLIGHT_BRIGHTNESS_PWM_PIN_CAP)) return true;Quoted 63 lines
Quoted 10 lines
Quoted 1 line
On some panels, this causes backlight issues on S3 resume.
What is it that we are missing in the resume path?
Quoted 2 lines
Enable the
feature only for eDP1.4 or later.I can't find the eDP 1.4 requirement in the spec. Regional brightness control was added in eDP 1.4, but we don't enable that. My concern is we might be missing a real fix by ignoring < eDP 1.4 panels.
Agreed.
This has been going on too long now, with no real effort to get at the roots of the problem. The right approach is to revert the regressing commits now, and start over. Reverts posted [1].
BR,
Jani.[1] https://patchwork.freedesktop.org/series/27623/
Quoted 18 lines
Quoted 4 lines
Fix-suggested-by Puthikorn Voravootivat <[email protected]>1. Please use the "Fixes" tag to refer to the commit that introduced the code you are fixing.
2. The "Suggested-by" tag is more common to give credits to the person who suggested the fix.
3. Please use the "Bugzilla" tag to point to the bug that David reported.Quoted 5 lines
Signed-off-by Jenny TC <[email protected]>--- drivers/gpu/drm/i915/intel_dp_aux_backlight.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)Quoted 6 lines
drivers/gpu/drm/i915/intel_dp_aux_backlight.c static int intel_dp_aux_setup_backlight(struct
Quoted 6 lines
drivers/gpu/drm/i915/intel_dp_aux_backlight.c +0
-0@@ -292,7 +292,7 @@ static int intel_dp_aux_setup_backlight(struct
intel_connector*connector,Quoted 11 lines
Quoted 11 lines
drivers/gpu/drm/i915/intel_dp_aux_backlight.c +0
-0* via PWM pin or using AUX is better than using PWM pin. * * The heuristic to determine that using AUX pin is better than using PWM pin is
- * that the panel support any of the feature list here.
+ * that the panel is eDP 1.4 or later and support any of the feature
+ list here
* - Regional backlight brightness adjustment
* - Backlight PWM frequency set
* - More than 8 bits resolution of brightness level @@ -310,6
+310,10 @@ static int intel_dp_aux_setup_backlight(struct
intel_connector*connector,Quoted 1 line
Quoted 1 line
if (!(intel_dp->edp_dpcd[2] &
DP_EDP_BACKLIGHT_BRIGHTNESS_PWM_PIN_CAP))Quoted 2 lines
Quoted 2 lines
return true;
Quoted 10 lines
Quoted 7 lines
drivers/gpu/drm/i915/intel_dp_aux_backlight.c static int intel_dp_aux_setup_backlight(struct intel_connector *connector, · line 319
Quoted 7 lines
drivers/gpu/drm/i915/intel_dp_aux_backlight.c +4
-0+/* Enable this for eDP 1.4 panel or later. */ +if (intel_dp->edp_dpcd[0 ] <DP_EDP_14 ) +return false; +/* Panel supports regional backlight brightness adjustment */ if (drm_dp_dpcd_readb (&intel_dp->aux,DP_EDP_GENERAL_CAP_3 , ®_val) !=1 ) {--
Jani Nikula, Intel Open Source Technology Center
Quoted 4 lines
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
I saw a DP 1.3 panel that advertise AUX backlight brightness control but not working properly. So it should work but not in real world. I think that is good reason enough to add this as a heuristic.
Quoted 23 lines · Dhinakaran
Quoted 19 lines · Jenny
Quoted 3 lines
Quoted 1 line
Quoted 1 line
With older panels, AUX pin for backlight doesn't work.
What evidence do you have to back up that claim?
Debugging further it's found that the panel I am having doesn't support AUX Backlight.
cat
/sys/kernel/debug/dri/0/eDP-1/i915_dpcd
...
0701: bb ff 00 00
....With below change its working for my panel. But doesn't address issue reported in
https://bugs.freedesktop.org/show_bug.cgi?id=101619 which seems to have a wrong DPCD data. Since we don't have a proper fix for all panels, I agree for revert.
intel_dp_aux_display_control_heuristic(struct intel_connector *connector)struct intel_dp *intel_dp = enc_to_intel_dp(&connector->encoder->base); uint8_t reg_val;
Quoted 90 lines
Review
Quoted 4 lines
(quoted diff) +4
-0+ /* Panel dosn't support enabling AUX Backlight control */ + if (!(intel_dp->edp_dpcd[1] & DP_EDP_BACKLIGHT_AUX_ENABLE_CAP)) { + return false; + }AUX backlight brightness control should work even without AUX enable capability.
Quoted 81 lines
/* Panel doesn't support adjusting backlight brightness via PWN pin */ if (!(intel_dp->edp_dpcd[2] & DP_EDP_BACKLIGHT_BRIGHTNESS_PWM_PIN_CAP)) return true;Quoted 71 lines
Quoted 10 lines
Quoted 1 line
On some panels, this causes backlight issues on S3 resume.
What is it that we are missing in the resume path?
Quoted 2 lines
Enable the
feature only for eDP1.4 or later.I can't find the eDP 1.4 requirement in the spec. Regional brightness control was added in eDP 1.4, but we don't enable that. My concern is we might be missing a real fix by ignoring < eDP 1.4 panels.
Agreed.
This has been going on too long now, with no real effort to get at the roots of the problem. The right approach is to revert the regressing commits now, and start over. Reverts posted [1].
BR,
Jani.[1] https://patchwork.freedesktop.org/series/27623/
Quoted 18 lines
Quoted 4 lines
Fix-suggested-by Puthikorn Voravootivat <[email protected]>1. Please use the "Fixes" tag to refer to the commit that introduced the code you are fixing.
2. The "Suggested-by" tag is more common to give credits to the person who suggested the fix.
3. Please use the "Bugzilla" tag to point to the bug that David reported.Quoted 5 lines
Signed-off-by Jenny TC <[email protected]>--- drivers/gpu/drm/i915/intel_dp_aux_backlight.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)Quoted 6 lines
drivers/gpu/drm/i915/intel_dp_aux_backlight.c static int intel_dp_aux_setup_backlight(struct
Quoted 6 lines
drivers/gpu/drm/i915/intel_dp_aux_backlight.c +0
-0@@ -292,7 +292,7 @@ static int intel_dp_aux_setup_backlight(struct
intel_connector*connector,Quoted 11 lines
Quoted 11 lines
drivers/gpu/drm/i915/intel_dp_aux_backlight.c +0
-0* via PWM pin or using AUX is better than using PWM pin. * * The heuristic to determine that using AUX pin is better than using PWM pin is
- * that the panel support any of the feature list here.
+ * that the panel is eDP 1.4 or later and support any of the feature
+ list here
* - Regional backlight brightness adjustment
* - Backlight PWM frequency set
* - More than 8 bits resolution of brightness level @@ -310,6
+310,10 @@ static int intel_dp_aux_setup_backlight(struct
intel_connector*connector,Quoted 1 line
Quoted 1 line
if (!(intel_dp->edp_dpcd[2] &
DP_EDP_BACKLIGHT_BRIGHTNESS_PWM_PIN_CAP))Quoted 9 lines
drivers/gpu/drm/i915/intel_dp_aux_backlight.c static int intel_dp_aux_setup_backlight(struct intel_connector *connector, · line 319
Quoted 9 lines
return true;drivers/gpu/drm/i915/intel_dp_aux_backlight.c +4
-0+/* Enable this for eDP 1.4 panel or later. */ +if (intel_dp->edp_dpcd[0 ] <DP_EDP_14 ) +return false; +/* Panel supports regional backlight brightness adjustment */ if (drm_dp_dpcd_readb (&intel_dp->aux,DP_EDP_GENERAL_CAP_3 , ®_val) !=1 ) {Quoted 2 lines
--
Jani Nikula, Intel Open Source Technology Center_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 5 lines · Puthikorn Voravootivat
I saw a DP 1.3 panel that advertise AUX backlight brightness control but not working properly. So it should work but not in real world. I think that is good reason enough to add this as a heuristic.
Either key it on eDP 1.4 and hope that it's a reasonable expectation, or employ a whitelist (potentially lots of effort adding all displays that supports AUX backlight, but safe from regressions) or a blacklist (potentially fewer displays need to be added, but risks introducing regressions for end users).
Kind regards, David
---------------------------------------------------------------------
Intel Finland Oy
Registered Address: PL 281, 00181 Helsinki Business Identity Code: 0357606 - 4 Domiciled in Helsinki
This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies.
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 11 lines · David Weinehall
Quoted 5 lines · Puthikorn Voravootivat
I saw a DP 1.3 panel that advertise AUX backlight brightness control but not working properly. So it should work but not in real world. I think that is good reason enough to add this as a heuristic.
Either key it on eDP 1.4 and hope that it's a reasonable expectation, or employ a whitelist (potentially lots of effort adding all displays that supports AUX backlight, but safe from regressions) or a blacklist (potentially fewer displays need to be added, but risks introducing regressions for end users).
Sorry for the blurb in the previous mail, I replied from my official Intel address by mistake :S
Kind regards, David
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Jani Nikula
maintainerQuoted 3 lines · Puthikorn Voravootivat
I saw a DP 1.3 panel that advertise AUX backlight brightness control but not working properly. So it should work but not in real world. I think that is good reason enough to add this as a heuristic.
Are you suggesting the one panel you mention is representative of the real world?
Granted, the original aux backlight implementation supported a very narrow selection of panels. I believe this is the very reason you are working on this patch series.
But now you're suggesting another arbitrary narrow selection of panels based on limited evidence.
BR,
Jani.
Signature · 5 lines
Jani Nikula, Intel Open Source Technology Center _______________________________________________ Intel-gfx mailing list [email protected] https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 2 lines
But now you're suggesting another arbitrary narrow selection of panels based on limited evidence.
I understand your point that the panel I observe is not the representative of the real world.
My point is that we don't know that the panel will work or not unless we test all panel in the world.
And blacklist would be too much work to maintain and whitelist would make this code too limited.
As standard adoption should be better over time, I suggest that the newer panel should have
better implement of the standard than older panel. And I suggest that eDP 1.4 should be a good
heuristic for the "newer panel" based on these 2 reasons
1. Even though it is a limited evident, David and I independently saw unrelated eDP 1.3 panel that
implement this feature incorrectly.
2. eDP 1.4 is the first version that support AUX backlight enablement. TCON vendor probably also
make sure the AUX backlight brightness ajustment works when testing that feature.
Is this make sense?
Thanks.
Quoted 16 lines · Jani Nikula
Quoted 3 lines · Puthikorn Voravootivat
I saw a DP 1.3 panel that advertise AUX backlight brightness control but not working properly. So it should work but not in real world. I think that is good reason enough to add this as a heuristic.
Are you suggesting the one panel you mention is representative of the real world?
Granted, the original aux backlight implementation supported a very narrow selection of panels. I believe this is the very reason you are working on this patch series.
But now you're suggesting another arbitrary narrow selection of panels based on limited evidence.
Quoted 6 lines
BR,
Jani.--
Jani Nikula, Intel Open Source Technology Center
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 24 lines · Puthikorn Voravootivat
Quoted 2 lines
But now you're suggesting another arbitrary narrow selection of panels based on limited evidence.
I understand your point that the panel I observe is not the representative of the real world.
My point is that we don't know that the panel will work or not unless we test all panel in the world.
And blacklist would be too much work to maintain and whitelist would make this code too limited.
As standard adoption should be better over time, I suggest that the newer panel should have
better implement of the standard than older panel. And I suggest that eDP 1.4 should be a good
heuristic for the "newer panel" based on these 2 reasons1. Even though it is a limited evident, David and I independently saw unrelated eDP 1.3 panel that
implement this feature incorrectly.
2. eDP 1.4 is the first version that support AUX backlight enablement. TCON vendor probably also
make sure the AUX backlight brightness ajustment works when testing that feature.
Quoted 4 lines
Is this make sense?
Thanks.
I tried to investigate this a little bit and found a device that reproduces the issue. The backlight does not come back up after a suspend-resume cycle because the PWM controller does not get enabled at resume. However, things just work at boot because the BIOS happens to enable PCH PWM at boot and the panel lights up via the BL_PWM_PIN. Like you said, this could be because some eDP 1.3 panels have a broken implementation and eDP 1.4 panels are better. Or, with the BL_PWM_PIN wired to the board, it simply overrides the DPCD settings. I decided to not disconnect the PWM pin and test this theory since this was a development laptop. In summary, I am not really sure blacklisting all eDP 1.3 panels is the best idea. Also, I don't know how many eDP 1.4 panels this has been tested to correctly work on.
Anyway, since we have four panels that do not work, we could check if these are the same model/make etc. and blacklist them if there's a common thread.
-DK
Quoted 22 lines
Quoted 20 lines · Jani Nikula
Quoted 3 lines · Puthikorn Voravootivat
I saw a DP 1.3 panel that advertise AUX backlight brightness control but not working properly. So it should work but not in real world. I think that is good reason enough to add this as a heuristic.
Are you suggesting the one panel you mention is representative of the real world?
Granted, the original aux backlight implementation supported a very narrow selection of panels. I believe this is the very reason you are working on this patch series.
But now you're suggesting another arbitrary narrow selection of panels based on limited evidence.
BR,
Jani.
Quoted 6 lines
Quoted 2 lines
--
Jani Nikula, Intel Open Source Technology Center_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 43 lines · Dhinakaran
Quoted 23 lines · Puthikorn Voravootivat
Quoted 2 lines
But now you're suggesting another arbitrary narrow selection of panels based on limited evidence.
I understand your point that the panel I observe is not the representative of the real world.
My point is that we don't know that the panel will work or not unless we test all panel in the world.
And blacklist would be too much work to maintain and whitelist would make this code too limited.
As standard adoption should be better over time, I suggest that the newer panel should have
better implement of the standard than older panel. And I suggest that eDP 1.4 should be a good
heuristic for the "newer panel" based on these 2 reasons1. Even though it is a limited evident, David and I independently saw unrelated eDP 1.3 panel that
implement this feature incorrectly.
2. eDP 1.4 is the first version that support AUX backlight enablement. TCON vendor probably also
make sure the AUX backlight brightness ajustment works when testing that feature.Quoted 4 lines
Is this make sense?
Thanks.
I tried to investigate this a little bit and found a device that reproduces the issue. The backlight does not come back up after a suspend-resume cycle because the PWM controller does not get enabled at resume. However, things just work at boot because the BIOS happens to enable PCH PWM at boot and the panel lights up via the
BL_PWM_PIN. Like you said, this could be because some eDP 1.3 panels have a broken implementation and eDP 1.4 panels are better. Or, with theBL_PWM_PINwired to the board, it simply overrides the DPCD settings. I decided to not disconnect the PWM pin and test this theory since this was a development laptop. In summary, I am not really sure blacklisting all eDP 1.3 panels is the best idea. Also, I don't know how many eDP 1.4 panels this has been tested to correctly work on.
Quoted 4 lines
Anyway, since we have four panels that do not work, we could check if these are the same model/make etc. and blacklist them if there's a common thread.
The panel in my system is made by LG, model LP140QH1-SPF1.
Kind regards, David
---------------------------------------------------------------------
Intel Finland Oy
Registered Address: PL 281, 00181 Helsinki Business Identity Code: 0357606 - 4 Domiciled in Helsinki
This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies.
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 4 lines · Jani Nikula
Quoted 2 lines · Dhinakaran
Quoted 1 line · Jenny TC
With older panels, AUX pin for backlight doesn't work.
What evidence do you have to back up that claim?
Chapter 10.1 does, at least according to my reading, state that AUX CH backlight control requires eDP v1.4.
Quoted 2 lines
Quoted 2 lines
Quoted 1 line
On some panels, this causes backlight issues on S3 resume.
What is it that we are missing in the resume path?
I suspect this isn't so much a resume issue, as a matter of some devices by sheer luck (read by using the backlight set already on bootup) keeping the right backlight level until after a suspend/resume cycle.
Quoted 49 lines
Quoted 6 lines
Quoted 3 lines
Enable the
feature only for eDP1.4 or later.I can't find the eDP 1.4 requirement in the spec. Regional brightness control was added in eDP 1.4, but we don't enable that. My concern is we might be missing a real fix by ignoring < eDP 1.4 panels.
Agreed.
This has been going on too long now, with no real effort to get at the roots of the problem. The right approach is to revert the regressing commits now, and start over. Reverts posted [1].
BR,
Jani.[1] https://patchwork.freedesktop.org/series/27623/
Quoted 32 lines
Quoted 2 lines
Fix-suggested-by Puthikorn Voravootivat <[email protected]>1. Please use the "Fixes" tag to refer to the commit that introduced the code you are fixing.
2. The "Suggested-by" tag is more common to give credits to the person who suggested the fix.
3. Please use the "Bugzilla" tag to point to the bug that David reported.Quoted 22 lines
Signed-off-by Jenny TC <[email protected]>--- drivers/gpu/drm/i915/intel_dp_aux_backlight.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)drivers/gpu/drm/i915/intel_dp_aux_backlight.c +1
-1@@ -292,7 +292,7 @@ static int intel_dp_aux_setup_backlight(struct intel_connector *connector,* via PWM pin or using AUX is better than using PWM pin. * * The heuristic to determine that using AUX pin is better than using PWM pin is -* that the panel support any of the feature list here. +* that the panel is eDP 1.4 or later and support any of the feature list here * - Regional backlight brightness adjustment * - Backlight PWM frequency set * - More than 8 bits resolution of brightness level @@ -310,6 +310,10 @@ static int intel_dp_aux_setup_backlight(struct intel_connector *connector,if (!(intel_dp->edp_dpcd[2 ] &DP_EDP_BACKLIGHT_BRIGHTNESS_PWM_PIN_CAP ))return true;
Quoted 7 lines
Quoted 7 lines
drivers/gpu/drm/i915/intel_dp_aux_backlight.c static int intel_dp_aux_setup_backlight(struct intel_connector *connector, · line 319
Quoted 7 lines
drivers/gpu/drm/i915/intel_dp_aux_backlight.c +4
-0+/* Enable this for eDP 1.4 panel or later. */ +if (intel_dp->edp_dpcd[0 ] <DP_EDP_14 ) +return false; +/* Panel supports regional backlight brightness adjustment */ if (drm_dp_dpcd_readb (&intel_dp->aux,DP_EDP_GENERAL_CAP_3 , ®_val) !=1 ) {
---------------------------------------------------------------------
Intel Finland Oy
Registered Address: PL 281, 00181 Helsinki Business Identity Code: 0357606 - 4 Domiciled in Helsinki
This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies.
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
Quoted 9 lines · David Weinehall
Quoted 4 lines · Jani Nikula
Quoted 2 lines · Dhinakaran
Quoted 1 line · Jenny TC
With older panels, AUX pin for backlight doesn't work.
What evidence do you have to back up that claim?
Chapter 10.1 does, at least according to my reading, state that AUX CH backlight control
requires eDP v1.4.
Yeah, I read that too and it is very misleading. There are several references to AUX CH backlight control being added in eDP v1.2 if you read further.
"Table 10-1 summarizes the display brightness control modes available with eDP v1.2 (and higher)."
"Displays that report eDP v1.1 (or lower; indicated by a value of 00h) have 00h values in DPCD Addresses 00701h through 007FFh a because enhanced display control capability is not supported. For eDP v1.2 (and higher), the Source device reads the eDP capability registers starting at DPCD Address 00701h. Through the use of read/write registers located within the range of DPCD Addresses 00720h through 007FFh, the Source device is able to control certain display aspects based on the capabilities reported h in DPCD Addresses 00701h through 0071Fh."
Quoted 5 lines
Quoted 2 lines
Quoted 2 lines
Quoted 1 line
On some panels, this causes backlight issues on S3 resume.
What is it that we are missing in the resume path?
I suspect this isn't so much a resume issue, as a matter of some devices by sheer luck (read by using the backlight set already on bootup) keeping the right backlight level until after a suspend/resume cycle.
Makes sense.
Quoted 63 lines
Quoted 49 lines
Quoted 6 lines
Quoted 3 lines
Enable the
feature only for eDP1.4 or later.I can't find the eDP 1.4 requirement in the spec. Regional brightness control was added in eDP 1.4, but we don't enable that. My concern is we might be missing a real fix by ignoring < eDP 1.4 panels.
Agreed.
This has been going on too long now, with no real effort to get at the roots of the problem. The right approach is to revert the regressing commits now, and start over. Reverts posted [1].
BR,
Jani.[1] https://patchwork.freedesktop.org/series/27623/
Quoted 32 lines
Quoted 2 lines
Fix-suggested-by Puthikorn Voravootivat <[email protected]>1. Please use the "Fixes" tag to refer to the commit that introduced the code you are fixing.
2. The "Suggested-by" tag is more common to give credits to the person who suggested the fix.
3. Please use the "Bugzilla" tag to point to the bug that David reported.Quoted 22 lines
Signed-off-by Jenny TC <[email protected]>--- drivers/gpu/drm/i915/intel_dp_aux_backlight.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)drivers/gpu/drm/i915/intel_dp_aux_backlight.c +1
-1@@ -292,7 +292,7 @@ static int intel_dp_aux_setup_backlight(struct intel_connector *connector,* via PWM pin or using AUX is better than using PWM pin. * * The heuristic to determine that using AUX pin is better than using PWM pin is -* that the panel support any of the feature list here. +* that the panel is eDP 1.4 or later and support any of the feature list here * - Regional backlight brightness adjustment * - Backlight PWM frequency set * - More than 8 bits resolution of brightness level @@ -310,6 +310,10 @@ static int intel_dp_aux_setup_backlight(struct intel_connector *connector,if (!(intel_dp->edp_dpcd[2 ] &DP_EDP_BACKLIGHT_BRIGHTNESS_PWM_PIN_CAP ))return true;Quoted 7 lines
Quoted 7 lines
drivers/gpu/drm/i915/intel_dp_aux_backlight.c static int intel_dp_aux_setup_backlight(struct intel_connector *connector, · line 319
Quoted 7 lines
drivers/gpu/drm/i915/intel_dp_aux_backlight.c +4
-0+/* Enable this for eDP 1.4 panel or later. */ +if (intel_dp->edp_dpcd[0 ] <DP_EDP_14 ) +return false; +/* Panel supports regional backlight brightness adjustment */ if (drm_dp_dpcd_readb (&intel_dp->aux,DP_EDP_GENERAL_CAP_3 , ®_val) !=1 ) {---------------------------------------------------------------------
Intel Finland Oy
Registered Address: PL 281, 00181 Helsinki
Business Identity Code: 0357606 - 4
Domiciled in Helsinki
Quoted 8 lines
This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). Any review or distribution by others is strictly prohibited. If you are not the intended recipient, please contact the sender and delete all copies.
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx
_______________________________________________
Intel-gfx mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/intel-gfx