Skip to contentSkip to conversation

How to make kernel aware of UBoot's bootargs?

U-Boot-Users Shawn Jin 1 participant 1 message Feb 15, 2005

lore
Share & tools
lore

Shawn Jin

author
#0 lore raw

Hi,

I'm working on IBM Ebony board and trying to make linux running on it. I built a linux-2.6.10 (from kernel.org) image but somehow the kernel refused to pick up the bootargs because the kernel command linux shows nothing and ethernet address is all 0xFF. I've researched DULG and this mailing list and got some hints that this is usually caused by the kernel's unawareness of uboot's bd_info.

However adding #include <asm/ppcboot.h> in arch/ppc/platforms/4xx/ibm440gp.h doesn't help solve the problem. I must have missed something else. What am I missing here?

## Current stack ends at 0x07FAA580 => set upper limit to 0x00800000 ## cmdline at 0x007FFC00 ... 0x007FFC51

bd address  = 0x07FAAF90
memstart    = 0x00000000
memsize     = 0x08000000
flashstart  = 0xFF800000
flashsize   = 0x00480000
flashoffset = 0x00000000
sramstart   = 0x00000000
sramsize    = 0x00000000
bootflags   = 0x00000000
intfreq     =    400 MHz
busfreq     = 133.333 MHz
ethaddr     = 00:04:AC:E3:1B:BB
IP addr     = 130.27.85.245
baudrate    =   9600 bps

No initrd
## Transferring control to Linux (at address 00000000) ... Linux version 2.6.10 (gcc version 3.3.3 (DENX ELDK 3.1 3.3.3-8)) #1 Fr i Feb 11 15:18:50 PST 2005
IBM Ebony port (MontaVista Software, Inc. (source at mvista.com)) Built 1 zonelists
Kernel command line:
PID hash table entries: 1024 (order: 10, 16384 bytes) <snipped>
emac: IBM EMAC Ethernet driver, version 2.0
Maintained by Benjamin Herrenschmidt <[email protected]>
zmii0: input 0 in SMII mode
eth0: IBM emac, MAC ff:ff:ff:ff:ff:ff
eth0: Found Generic MII PHY (0x08)
zmii0: input 1 in RMII mode
eth1: IBM emac, MAC ff:ff:ff:ff:ff:ff
eth1: Found Generic MII PHY (0x09)
<snipped>

Thanks,
-Shawn.