Add SMI reset and clamp for MediaTek MT8188 SoC
v3 cover Add SMI reset and clamp for MediaTek MT8188 SoC
Based on tag: next-20250120, linux-next/master
When we enable/disable power domain, the SMI LARBs linked to this power domain could be affected by the bus glitch. To avoid this issue, SMI need to apply clamp and reset opereations.
This patch mainly add these functions:
1) Register genpd callback for SMI LARBs and handle this power domain status change in SMI driver.
2) Add bindings to support SMI Sub Common for MT8188.
3) Add bindings to support SMI larbs reset opearation.
Changes v3:
- Remove redundant descriptions for 'resets' and 'reset-names'
- Modify the requirements for 'resets' and 'reset-names'
- Rename 'mtk_smi_larb_parse_clamp' to 'mtk_smi_larb_parse_clamp_optional'
- Rename 'mtk_smi_larb_parse_reset' to 'mtk_smi_larb_parse_reset_optional'
- Merge 'mtk_smi_larb_clamp_protect_enable' and 'mtk_smi_larb_clamp_protect_disble' into one function
- Modify the definition for mtk_smi_larb_clamp_port_mt8188, use 'larbid' as the index of the array
- Use 'syscon_regmap_lookup_by_phandle' instead of 'device_node_to_regmap'
- Do Not parse 'resets', just check the return value of 'devm_reset_control_get'
- Add 'has_gals' flag for 'mtk_smi_sub_common_mt8188'
v2:
https://lore.kernel.org/lkml/[email protected]/
https://lore.kernel.org/lkml/[email protected]/
friday.yang (2):
dt-bindings: memory: mediatek: Add support for SMI reset and clamp
memory: mtk-smi: mt8188: Add support for SMI reset and clamp
.../mediatek,smi-common.yaml | 2 + .../memory-controllers/mediatek,smi-larb.yaml | 20 +++ drivers/memory/mtk-smi.c | 141 +++++++++++++++++- 3 files changed, 159 insertions(+), 4 deletions(-)
--
2.46.0
PATCH v3 1/2 dt-bindings: memory: mediatek: Add SMI reset and clamp for MT8188
From: "friday.yang" <[email protected]>
Add 'resets' and 'reset-names' properties for SMI LARBs to support SMI reset operations.
On the MediaTek platform, some SMI LARBs are directly connected to the SMI Common, while others are connected to the SMI Sub-Common, which in turn is connected to the SMI Common. The hardware block diagram can be described as follows.
SMI-Common(Smart Multimedia Interface Common)
|
+----------------+------------------+
| | |
| | |
| | |
| | |
| | |
larb0 SMI-Sub-Common0 SMI-Sub-Common1
| | | | |
larb1 larb2 larb3 larb7 larb9
--- .../mediatek,smi-common.yaml | 2 ++ .../memory-controllers/mediatek,smi-larb.yaml | 20 +++++++++++++++++++ 2 files changed, 22 insertions(+)
Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml +2 -0
@@ -39,6 +39,7 @@ properties: - mediatek,mt8186-smi-common - mediatek,mt8188-smi-common-vdo - mediatek,mt8188-smi-common-vpp + - mediatek,mt8188-smi-sub-common - mediatek,mt8192-smi-common - mediatek,mt8195-smi-common-vdo - mediatek,mt8195-smi-common-vpp
@@ -107,6 +108,7 @@ allOf: compatible: contains: enum: + - mediatek,mt8188-smi-sub-common - mediatek,mt8195-smi-sub-common then: required:
Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml +20 -0
@@ -69,6 +69,12 @@ properties: description: the hardware id of this larb. It's only required when this hardware id is not consecutive from its M4U point of view. + resets: + maxItems: 1 + + reset-names: + const: larb + required: - compatible - reg
@@ -125,6 +131,20 @@ allOf: required: - mediatek,larb-id + - if: # only for image, camera and ipe subsys + properties: + compatible: + const: mediatek,mt8188-smi-larb + mediatek,larb-id: + oneOf: + - enum: + [ 9, 10, 11, 12, 13, 16, 17, 18, 19, 20 ] + + then: + required: + - resets + - reset-names + additionalProperties: false examples:
--
2.46.0
Krzysztof Kozlowski
maintainerRe: [PATCH v3 1/2] dt-bindings: memory: mediatek: Add SMI reset and clamp for MT8188
Quoted 21 lines · Friday Yang
From: "friday.yang" <[email protected]>
Add 'resets' and 'reset-names' properties for SMI LARBs to support SMI reset operations.
On the MediaTek platform, some SMI LARBs are directly connected to the SMI Common, while others are connected to the SMI Sub-Common, which in turn is connected to the SMI Common. The hardware block diagram can be described as follows.SMI-Common(Smart Multimedia Interface Common)
|
+----------------+------------------+
| | |
| | |
| | |
| | |
| | |
larb0 SMI-Sub-Common0 SMI-Sub-Common1
| | | | |
larb1 larb2 larb3 larb7 larb9
Quoted 1 line
Signed-off-by Friday Yang <[email protected]>
SoB/From mismatch.
Please run scripts/checkpatch.pl and fix reported warnings. After that, run also 'scripts/checkpatch.pl --strict' and (probably) fix more warnings. Some warnings can be ignored, especially from --strict run, but the code here looks like it needs a fix. Feel free to get in touch if the warning is not clear.
Best regards,
Krzysztof
Re: [PATCH v3 1/2] dt-bindings: memory: mediatek: Add SMI reset and clamp for MT8188
Quoted 30 lines · Krzysztof Kozlowski
External email : Please do not click links or open attachments until you have verified the sender or the content.
Quoted 21 lines · Friday Yang
From: "friday.yang" <[email protected]>
Add 'resets' and 'reset-names' properties for SMI LARBs to support SMI reset operations.
On the MediaTek platform, some SMI LARBs are directly connected to the SMI Common, while others are connected to the SMI Sub-Common, which in turn is connected to the SMI Common. The hardware block diagram can be described as follows.SMI-Common(Smart Multimedia Interface Common)
|
+----------------+------------------+
| | |
| | |
| | |
| | |
| | |
larb0 SMI-Sub-Common0 SMI-Sub-Common1
| | | | |
larb1 larb2 larb3 larb7 larb9Quoted 1 line
Signed-off-by Friday Yang <[email protected]>SoB/From mismatch.
Quoted 8 lines
Please run
scripts/checkpatch.pland fix reported warnings. After that,
run also 'scripts/checkpatch.pl--strict' and (probably) fix more warnings. Some warnings can be ignored, especially from --strict run, but the code here looks like it needs a fix. Feel free to get in touch
if the warning is not clear.
Thanks for kindly remind, I will fix the signed name mismatch error and check the patch again.
Quoted 3 lines
Best regards,
Krzysztof
PATCH v3 2/2 memory: mtk-smi: mt8188: Add SMI reset and clamp for MT8188
In reply to Friday YangFrom: "friday.yang" <[email protected]>
To prevent handling glitch signals during MTCMOS on/off transitions, SMI requires clamp and reset operations. Parse the reset settings for SMI LARBs and the clamp settings for the SMI Sub-Common. Register genpd callback for the SMI LARBs located in image, camera and IPE subsystems, and apply reset and clamp operations within the callback.
--- drivers/memory/mtk-smi.c | 141 +++++++++++++++++++++++++++++++++++++-- 1 file changed, 137 insertions(+), 4 deletions(-)
drivers/memory/mtk-smi.c +137 -4
@@ -10,11 +10,15 @@#include <linux/err.h> #include <linux/io.h> #include <linux/iopoll.h> +#include <linux/mfd/syscon.h> #include <linux/module.h> #include <linux/of.h> #include <linux/of_platform.h> #include <linux/platform_device.h> +#include <linux/pm_domain.h> #include <linux/pm_runtime.h> +#include <linux/regmap.h> +#include <linux/reset.h> #include <linux/soc/mediatek/mtk_sip_svc.h> #include <soc/mediatek/smi.h> #include <dt-bindings/memory/mt2701-larb-port.h>
@@ -36,6 +40,12 @@#define SMI_DCM 0x300#define SMI_DUMMY 0x444 +#define SMI_COMMON_CLAMP_EN 0x3c0 +#define SMI_COMMON_CLAMP_EN_SET 0x3c4 +#define SMI_COMMON_CLAMP_EN_CLR 0x3c8 + +#define SMI_SUB_COMM_INPORT_NR (8) +/* SMI LARB */ #define SMI_LARB_SLP_CON 0xc#define SLP_PROT_EN BIT(0)
@@ -134,6 +144,7 @@ struct mtk_smi_larb_gen {unsigned int larb_direct_to_common_mask;unsigned int flags_general;const u8 (*ostd)[SMI_LARB_PORT_NR_MAX ]; +const u8 *clamp_port; };struct mtk_smi {
@@ -150,6 +161,7 @@ struct mtk_smi { };struct mtk_smi_larb {/* larb: local arbiter */ +struct device *dev;struct mtk_smi smi;void __iomem *base;struct device *smi_common_dev;/* common or sub-common dev */
@@ -157,6 +169,10 @@ struct mtk_smi_larb { /* larb: local arbiter */int larbid;u32 *mmu;unsigned char *bank; +struct regmap *sub_comm_syscon; +u8 sub_comm_inport; +struct notifier_block nb; +struct reset_control *rst_con; }; static int
@@ -377,6 +393,19 @@ static const u8 mtk_smi_larb_mt8195_ostd[][SMI_LARB_PORT_NR_MAX] = { [28] = {0x1a, 0x0e, 0x0a, 0x0a, 0x0c, 0x0e, 0x10,}, }; +static const u8 mtk_smi_larb_clamp_port_mt8188[MTK_LARB_NR_MAX ] = { + [9 ] =BIT (1 ),/* larb10 */ + [10 ] =BIT (2 ),/* larb11a */ + [11 ] =BIT (2 ),/* larb11b */ + [12 ] =BIT (3 ),/* larb11c */ + [13 ] =BIT (0 ),/* larb12 */ + [16 ] =BIT (1 ),/* larb15 */ + [17 ] =BIT (2 ),/* larb16a */ + [18 ] =BIT (2 ),/* larb16b */ + [19 ] =BIT (3 ),/* larb17a */ + [20 ] =BIT (3 ),/* larb17b */ +}; +static const struct mtk_smi_larb_gen mtk_smi_larb_mt2701 = { .port_in_larb = {LARB0_PORT_OFFSET ,LARB1_PORT_OFFSET ,
@@ -423,6 +452,7 @@ static const struct mtk_smi_larb_gen mtk_smi_larb_mt8188 = { .flags_general = MTK_SMI_FLAG_THRT_UPDATE | MTK_SMI_FLAG_SW_FLAG | MTK_SMI_FLAG_SLEEP_CTL | MTK_SMI_FLAG_CFG_PORT_SEC_CTL, .ostd = mtk_smi_larb_mt8188_ostd, + .clamp_port = mtk_smi_larb_clamp_port_mt8188, };static const struct mtk_smi_larb_gen mtk_smi_larb_mt8192 = {
@@ -472,6 +502,46 @@ static void mtk_smi_larb_sleep_ctrl_disable(struct mtk_smi_larb *larb)writel_relaxed (0 , larb->base +SMI_LARB_SLP_CON ); } +static int mtk_smi_larb_clamp_protect_enable (struct device *dev,bool enable) +{ +struct mtk_smi_larb *larb =dev_get_drvdata (dev); +u32 reg; +int ret; + +/* sub_comm_syscon could be NULL if larb directly linked to SMI common */ +if (!larb->sub_comm_syscon) +return -EINVAL ; + + reg = enable ?SMI_COMMON_CLAMP_EN_SET :SMI_COMMON_CLAMP_EN_CLR ; + + ret =regmap_write (larb->sub_comm_syscon, reg, + larb->sub_comm_inport); +if (ret) +dev_err (dev,"Unable to %s clamp for input port %d: %d\n" , + enable ?"enable" :"disable" , + larb->sub_comm_inport, ret); + +return ret; +} + +static int mtk_smi_genpd_callback (struct notifier_block *nb, +unsigned long flags,void *data) +{ + struct mtk_smi_larb *larb = container_of(nb, struct mtk_smi_larb, nb); +struct device *dev = larb->dev; + +if (flags ==GENPD_NOTIFY_PRE_ON || flags ==GENPD_NOTIFY_PRE_OFF ) { +/* disable related SMI sub-common port */ +mtk_smi_larb_clamp_protect_enable (dev, true); + }else if (flags ==GENPD_NOTIFY_ON ) { +/* enable related SMI sub-common port */ +reset_control_reset (larb->rst_con); +mtk_smi_larb_clamp_protect_enable (dev, false); + } + +return NOTIFY_OK ; +} +static int mtk_smi_device_link_common (struct device *dev,struct device **com_dev) {struct platform_device *smi_com_pdev;
@@ -528,6 +598,53 @@ static int mtk_smi_dts_clk_init(struct device *dev, struct mtk_smi *smi,return ret; } +static int mtk_smi_larb_parse_clamp_optional (struct mtk_smi_larb *larb) +{ +struct device *dev = larb->dev; +const struct mtk_smi_larb_gen *larb_gen = larb->larb_gen; +u32 larb_id; +int ret; + +/** +* Only SMI LARBs in camera, image and IPE subsys need to +* apply clamp and reset operations, others can be skipped. +*/ + ret =of_property_read_u32 (dev->of_node,"mediatek,larb-id" , &larb_id); +if (ret) +return -EINVAL ; +if (!larb_gen->clamp_port || !larb_gen->clamp_port[larb_id]) +return 0 ; + + larb->sub_comm_inport = larb_gen->clamp_port[larb_id]; + larb->sub_comm_syscon =syscon_regmap_lookup_by_phandle (dev->of_node,"mediatek,smi" ); +if (IS_ERR (larb->sub_comm_syscon)) { + larb->sub_comm_syscon =NULL ; +return dev_err_probe (dev, -EINVAL , +"Unknown clamp port for larb %d\n" , larb_id); + } + +return 0 ; +} + +static int mtk_smi_larb_parse_reset_optional (struct mtk_smi_larb *larb) +{ +struct device *dev = larb->dev; +int ret; + + larb->rst_con =devm_reset_control_get (dev,"larb" ); +if (IS_ERR (larb->rst_con)) +return dev_err_probe (dev,PTR_ERR (larb->rst_con), +"Failed to get larb reset controller\n" ); + + larb->nb.notifier_call = mtk_smi_genpd_callback; + ret =dev_pm_genpd_add_notifier (dev, &larb->nb); +if (ret) +return dev_err_probe (dev, -EINVAL , +"Failed to add genpd callback %d\n" , ret); + +return 0 ; +} +static int mtk_smi_larb_probe (struct platform_device *pdev) {struct mtk_smi_larb *larb;
@@ -538,6 +655,7 @@ static int mtk_smi_larb_probe(struct platform_device *pdev)if (!larb)return -ENOMEM ; + larb->dev = dev; larb->larb_gen =of_device_get_match_data (dev); larb->base =devm_platform_ioremap_resource (pdev,0 );if (IS_ERR (larb->base))
@@ -554,15 +672,24 @@ static int mtk_smi_larb_probe(struct platform_device *pdev)if (ret <0 )return ret; -pm_runtime_enable (dev); + ret =mtk_smi_larb_parse_clamp_optional (larb); +if (ret) + goto err_link_remove; + + ret =mtk_smi_larb_parse_reset_optional (larb); +if (ret && ret != -ENOENT ) + goto err_link_remove; +platform_set_drvdata (pdev, larb); ret =component_add (dev, &mtk_smi_larb_component_ops);if (ret) - goto err_pm_disable; + goto err_link_remove; + +pm_runtime_enable (dev); +return 0 ; -err_pm_disable: -pm_runtime_disable (dev); +err_link_remove:device_link_remove (dev, larb->smi_common_dev);return ret; }
@@ -686,6 +813,11 @@ static const struct mtk_smi_common_plat mtk_smi_common_mt8188_vpp = { .init = mtk_smi_common_mt8195_init, }; +static const struct mtk_smi_common_plat mtk_smi_sub_common_mt8188 = { + .type =MTK_SMI_GEN2_SUB_COMM , + .has_gals = true, +}; +static const struct mtk_smi_common_plat mtk_smi_common_mt8192 = { .type =MTK_SMI_GEN2 , .has_gals = true,
@@ -729,6 +861,7 @@ static const struct of_device_id mtk_smi_common_of_ids[] = { {.compatible = "mediatek,mt8186-smi-common", .data = &mtk_smi_common_mt8186}, {.compatible = "mediatek,mt8188-smi-common-vdo", .data = &mtk_smi_common_mt8188_vdo}, {.compatible = "mediatek,mt8188-smi-common-vpp", .data = &mtk_smi_common_mt8188_vpp}, + {.compatible = "mediatek,mt8188-smi-sub-common", .data = &mtk_smi_sub_common_mt8188}, {.compatible = "mediatek,mt8192-smi-common", .data = &mtk_smi_common_mt8192}, {.compatible = "mediatek,mt8195-smi-common-vdo", .data = &mtk_smi_common_mt8195_vdo}, {.compatible = "mediatek,mt8195-smi-common-vpp", .data = &mtk_smi_common_mt8195_vpp},
--
2.46.0
Re: [PATCH v3 2/2] memory: mtk-smi: mt8188: Add SMI reset and clamp for MT8188
Quoted 17 lines · Friday Yang
From: "friday.yang" <[email protected]>
To prevent handling glitch signals during MTCMOS on/off transitions, SMI requires clamp and reset operations. Parse the reset settings for SMI LARBs and the clamp settings for the SMI Sub-Common. Register genpd callback for the SMI LARBs located in image, camera and IPE subsystems, and apply reset and clamp operations within the callback.
Signed-off-by Friday Yang <[email protected]>--- drivers/memory/mtk-smi.c | 141 +++++++++++++++++++++++++++++++++++++-- 1 file changed, 137 insertions(+), 4 deletions(-)drivers/memory/mtk-smi.c +0
-0
[...]
Quoted 28 lines
drivers/memory/mtk-smi.c +24
-0@@ -528,6 +598,53 @@ static int mtk_smi_dts_clk_init(struct device *dev, struct mtk_smi *smi,return ret; } +static int mtk_smi_larb_parse_clamp_optional (struct mtk_smi_larb *larb) +{ +struct device *dev = larb->dev; +const struct mtk_smi_larb_gen *larb_gen = larb->larb_gen; +u32 larb_id; +int ret; + +/** +* Only SMI LARBs in camera, image and IPE subsys need to +* apply clamp and reset operations, others can be skipped. +*/ + ret =of_property_read_u32 (dev->of_node,"mediatek,larb-id" , &larb_id); +if (ret) +return -EINVAL ; +if (!larb_gen->clamp_port || !larb_gen->clamp_port[larb_id]) +return 0 ; + + larb->sub_comm_inport = larb_gen->clamp_port[larb_id]; + larb->sub_comm_syscon =syscon_regmap_lookup_by_phandle (dev->of_node,"mediatek,smi" ); +if (IS_ERR (larb->sub_comm_syscon)) { + larb->sub_comm_syscon =NULL ; +return dev_err_probe (dev, -EINVAL , +"Unknown clamp port for larb %d\n" , larb_id); + }
drivers/memory/mtk-smi.c static int mtk_smi_dts_clk_init(struct device *dev, struct mtk_smi *smi, · line 634
Quoted 10 lines
drivers/memory/mtk-smi.c +10
-0+ +return 0 ; +} + +static int mtk_smi_larb_parse_reset_optional (struct mtk_smi_larb *larb) +{ +struct device *dev = larb->dev; +int ret; + + larb->rst_con =devm_reset_control_get (dev,"larb" );
Please use devm_reset_control_get_exclusive() directly.
Or use devm_reset_control_get_optional_exclusive(), which returns NULL instead of -ENOENT. That way you can ...
drivers/memory/mtk-smi.c static int mtk_smi_dts_clk_init(struct device *dev, struct mtk_smi *smi, · line 637
Quoted 3 lines
drivers/memory/mtk-smi.c +3
-0+if (IS_ERR (larb->rst_con)) +return dev_err_probe (dev,PTR_ERR (larb->rst_con), +"Failed to get larb reset controller\n" );
... suppress this error message in case of -ENOENT and return with:
if (!larb->rst_con) return 0;
here.
Quoted 22 lines
drivers/memory/mtk-smi.c +11
-0+ + larb->nb.notifier_call = mtk_smi_genpd_callback; + ret =dev_pm_genpd_add_notifier (dev, &larb->nb); +if (ret) +return dev_err_probe (dev, -EINVAL , +"Failed to add genpd callback %d\n" , ret); + +return 0 ; +} +static int mtk_smi_larb_probe (struct platform_device *pdev) {struct mtk_smi_larb *larb;@@ -538,6 +655,7 @@ static int mtk_smi_larb_probe(struct platform_device *pdev)if (!larb)return -ENOMEM ; + larb->dev = dev; larb->larb_gen =of_device_get_match_data (dev); larb->base =devm_platform_ioremap_resource (pdev,0 );if (IS_ERR (larb->base))
drivers/memory/mtk-smi.c static int mtk_smi_larb_probe(struct platform_device *pdev) · line 680
Quoted 10 lines
drivers/memory/mtk-smi.c +6
-1@@ -554,15 +672,24 @@ static int mtk_smi_larb_probe(struct platform_device *pdev)if (ret <0 )return ret; -pm_runtime_enable (dev); + ret =mtk_smi_larb_parse_clamp_optional (larb); +if (ret) + goto err_link_remove; + + ret =mtk_smi_larb_parse_reset_optional (larb); +if (ret && ret != -ENOENT )
The ret != -ENOENT check could be dropped if you use devm_reset_control_get_optional_exclusive() above.
regards
Philipp
Re: [PATCH v3 2/2] memory: mtk-smi: mt8188: Add SMI reset and clamp for MT8188
Quoted 69 lines · Philipp Zabel
External email : Please do not click links or open attachments until you have verified the sender or the content.
Quoted 21 lines · Friday Yang
From: "friday.yang" <[email protected]>
To prevent handling glitch signals during MTCMOS on/off transitions,
SMI requires clamp and reset operations. Parse the reset settings for
SMI LARBs and the clamp settings for the SMI Sub-Common. Register genpd callback for the SMI LARBs located in image, camera and IPE subsystems, and apply reset and clamp operations within the callback.Signed-off-by Friday Yang <[email protected]>--- drivers/memory/mtk-smi.c | 141 +++++++++++++++++++++++++++++++++++++-- 1 file changed, 137 insertions(+), 4 deletions(-)drivers/memory/mtk-smi.c +0
-0[...]
Quoted 41 lines
drivers/memory/mtk-smi.c +19
-0@@ -528,6 +598,53 @@ static int mtk_smi_dts_clk_init(struct device *dev, struct mtk_smi *smi, return ret; } +static int mtk_smi_larb_parse_clamp_optional (struct mtk_smi_larb *larb) +{ +struct device *dev = larb->dev; +const struct mtk_smi_larb_gen *larb_gen = larb->larb_gen; +u32 larb_id; +int ret; + +/** +* Only SMI LARBs in camera, image and IPE subsys need to +* apply clamp and reset operations, others can be skipped. +*/ + ret =of_property_read_u32 (dev->of_node,"mediatek,larb-id" , &larb_id); +if (ret) +return -EINVAL ; +if (!larb_gen->clamp_port || !larb_gen->clamp_port[larb_id]) +return 0 ; + + larb->sub_comm_inport = larb_gen->clamp_port[larb_id]; + larb->sub_comm_syscon = syscon_regmap_lookup_by_phandle(dev-Quoted 1 line
of_node, "mediatek,smi");drivers/memory/mtk-smi.c +4
-0+if (IS_ERR (larb->sub_comm_syscon)) { + larb->sub_comm_syscon =NULL ; + return dev_err_probe(dev, -EINVAL, + "Unknown clamp port for larb%d\n",
larb_id);drivers/memory/mtk-smi.c +6
-0+ } + +return 0 ; +} + +static int mtk_smi_larb_parse_reset_optional(struct mtk_smi_larb*larb)
drivers/memory/mtk-smi.c +2
-0+{ +struct device *dev = larb->dev;
Quoted 8 lines
drivers/memory/mtk-smi.c static int mtk_smi_dts_clk_init(struct device *dev, struct mtk_smi *smi, · line 634
Quoted 3 lines
drivers/memory/mtk-smi.c +3
-0+int ret; + + larb->rst_con =devm_reset_control_get (dev,"larb" );Please use
devm_reset_control_get_exclusive()directly. Or usedevm_reset_control_get_optional_exclusive(), which returns NULL
instead of-ENOENT. That way you can ...
Thanks for your comment, I will fix it in this way.
Quoted 41 lines
Quoted 5 lines
drivers/memory/mtk-smi.c +3
-0+if (IS_ERR (larb->rst_con)) + return dev_err_probe(dev, PTR_ERR(larb->rst_con), + "Failed to get larb resetcontroller\n");
... suppress this error message in case of
-ENOENTand return with:if (!larb->rst_con) return 0;here.
Quoted 28 lines
drivers/memory/mtk-smi.c +6
-0+ + larb->nb.notifier_call = mtk_smi_genpd_callback; + ret =dev_pm_genpd_add_notifier (dev, &larb->nb); +if (ret) + return dev_err_probe(dev, -EINVAL, + "Failed to add genpd callback%d\n", ret);
drivers/memory/mtk-smi.c +5
-0+ +return 0 ; +} +static int mtk_smi_larb_probe (struct platform_device *pdev) {struct mtk_smi_larb *larb;@@ -538,6 +655,7 @@ static int mtk_smi_larb_probe(struct platform_device *pdev)if (!larb)return -ENOMEM ; + larb->dev = dev; larb->larb_gen =of_device_get_match_data (dev); larb->base =devm_platform_ioremap_resource (pdev,0 );if (IS_ERR(larb->base))drivers/memory/mtk-smi.c +0
-0@@ -554,15 +672,24 @@ static int mtk_smi_larb_probe(struct platform_device *pdev)if (ret <0 )return ret;
Quoted 11 lines
drivers/memory/mtk-smi.c static int mtk_smi_larb_probe(struct platform_device *pdev) · line 680
Quoted 7 lines
drivers/memory/mtk-smi.c +6
-1-pm_runtime_enable (dev); + ret =mtk_smi_larb_parse_clamp_optional (larb); +if (ret) + goto err_link_remove; + + ret =mtk_smi_larb_parse_reset_optional (larb); +if (ret && ret != -ENOENT )The ret !=
-ENOENTcheck could be dropped if you usedevm_reset_control_get_optional_exclusive()above.
OK, I will fix it.
Quoted 3 lines
regards
Philipp