Skip to contentSkip to conversation

at76c50x-usb: fix Oops on disconnect

PATCH In review Jason Andryuk 2 participants 4 messages Feb 17, 2009 – Feb 19, 2009 Networking drivers (wireless)

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 at76c50x-usb: fix Oops on disconnect

flush_workqueue needs to be called instead of the generic one and the associated functions need to be modified to prevent re-adding themselves to the workqueue.

The rx_tasklet is also killed in the small (?) chance it is scheduled.

--

(quoted diff) +0 -0

b/drivers/net/wireless/at76c50x-usb.c
index 8d508ca..7a03251 100644

drivers/net/wireless/at76c50x-usb.c +6 -0
@@ -1860,6 +1860,9 @@ static void at76_dwork_hw_scan(struct work_struct *work)
                           dwork_hw_scan.work);
     int ret;
 
+    if (priv->device_unplugged)
+        return;
+
     mutex_lock(&priv->mtx);
 
     ret = at76_get_cmd_status(priv->udev, CMD_SCAN);
@@ -1897,6 +1900,9 @@ static int at76_hw_scan(struct ieee80211_hw *hw,
 
     at76_dbg(DBG_MAC80211, "%s():", __func__);
 
+    if (priv->device_unplugged)
+        return 0;
+
     mutex_lock(&priv->mtx);
 
     ieee80211_stop_queues(hw);
@@ -2003,6 +2009,10 @@ static void at76_configure_filter(struct

ieee80211_hw *hw,

     flags = changed_flags & AT76_SUPPORTED_FILTERS;
     *total_flags = AT76_SUPPORTED_FILTERS;

+ /* Bail out after updating flags to prevent a WARN_ON in mac80211. */
+ if (priv->device_unplugged)
+ return;
+
/* FIXME: access to priv->promisc should be protected with
* priv->mtx, but it's impossible because this function needs to be
* atomic */
@@ -2103,8 +2113,7 @@ static struct at76_priv *at76_alloc_new_device(struct usb_device *udev)

     INIT_WORK(&priv->work_submit_rx, at76_work_submit_rx);
     INIT_DELAYED_WORK(&priv->dwork_hw_scan, at76_dwork_hw_scan);
-    priv->rx_tasklet.func = at76_rx_tasklet;
-    priv->rx_tasklet.data = 0;
+    tasklet_init(&priv->rx_tasklet, at76_rx_tasklet, 0);
     priv->pm_mode = AT76_PM_OFF;
     priv->pm_period = 0;
@@ -2243,6 +2252,7 @@ static int at76_init_new_device(struct at76_priv *priv,
     priv->scan_min_time = DEF_SCAN_MIN_TIME;
     priv->scan_max_time = DEF_SCAN_MAX_TIME;
     priv->scan_mode = SCAN_TYPE_ACTIVE;

+ priv->device_unplugged = 0;

     /* mac80211 initialisation */
     priv->hw->wiphy->max_scan_ssids = 1;
@@ -2284,13 +2294,12 @@ static void at76_delete_device(struct at76_priv *priv)
     /* The device is gone, don't bother turning it off */
     priv->device_unplugged = 1;

- if (priv->mac80211_registered)
- ieee80211_unregister_hw(priv->hw);
+ tasklet_kill(&priv->rx_tasklet);

- /* assuming we used keventd, it must quiesce too */
- flush_scheduled_work();
-
- kfree(priv->bulk_out_buffer);
+ if (priv->mac80211_registered) {
+ flush_workqueue(priv->hw->workqueue);
+ ieee80211_unregister_hw(priv->hw);
+ }

     if (priv->tx_urb) {
         usb_kill_urb(priv->tx_urb);

@@ -2303,6 +2312,8 @@ static void at76_delete_device(struct at76_priv *priv)

     at76_dbg(DBG_PROC_ENTRY, "%s: unlinked urbs", __func__);

+ kfree(priv->bulk_out_buffer);
+

     if (priv->rx_skb)
         kfree_skb(priv->rx_skb);
#1 lore raw
Quoted 5 lines · Jason Andryuk

flush_workqueue needs to be called instead of the generic one and the associated functions need to be modified to prevent re-adding themselves to the workqueue.

The rx_tasklet is also killed in the small (?) chance it is scheduled.

Unfortunately the patch is corrupted:

patching file drivers/net/wireless/at76c50x-usb.c Hunk #1 FAILED at 1860.
Hunk #2 FAILED at 1900.
patch: **** malformed patch at line 80: ieee80211_hw *hw,

Can you resend it?

Signature · 1 line
Kalle Valo
#2 lore raw
Quoted 8 lines · Kalle Valo
Quoted 5 lines · Jason Andryuk

flush_workqueue needs to be called instead of the generic one and the associated functions need to be modified to prevent re-adding themselves to the workqueue.

The rx_tasklet is also killed in the small (?) chance it is scheduled.

Quoted 8 lines

Unfortunately the patch is corrupted:

patching file drivers/net/wireless/at76c50x-usb.c Hunk #1 FAILED at 1860.
Hunk #2 FAILED at 1900.
patch: **** malformed patch at line 80: ieee80211_hw *hw,

Can you resend it?

I the problem was line wrapping from gmail's web interface.

---

flush_workqueue needs to be called instead of the generic one and the associated functions need to be modified to prevent re-adding themselves to the workqueue.

The rx_tasklet is also killed in the small (?) chance it is scheduled.

--

drivers/net/wireless/at76c50x-usb.c +19 -8
index 8d508ca..7a03251 100644
@@ -1860,6 +1860,9 @@ static void at76_dwork_hw_scan(struct work_struct *work)
 					      dwork_hw_scan.work);
 	int ret;
 
+	if (priv->device_unplugged)
+		return;
+
 	mutex_lock(&priv->mtx);
 
 	ret = at76_get_cmd_status(priv->udev, CMD_SCAN);
@@ -1897,6 +1900,9 @@ static int at76_hw_scan(struct ieee80211_hw *hw,
 
 	at76_dbg(DBG_MAC80211, "%s():", __func__);
 
+	if (priv->device_unplugged)
+		return 0;
+
 	mutex_lock(&priv->mtx);
 
 	ieee80211_stop_queues(hw);
@@ -2003,6 +2009,10 @@ static void at76_configure_filter(struct ieee80211_hw *hw,
 	flags = changed_flags & AT76_SUPPORTED_FILTERS;
 	*total_flags = AT76_SUPPORTED_FILTERS;
 
+	/* Bail out after updating flags to prevent a WARN_ON in mac80211. */
+      	if (priv->device_unplugged)
+		return;
+
 	/* FIXME: access to priv->promisc should be protected with
 	 * priv->mtx, but it's impossible because this function needs to be
 	 * atomic */
@@ -2103,8 +2113,7 @@ static struct at76_priv *at76_alloc_new_device(struct usb_device *udev)
 	INIT_WORK(&priv->work_submit_rx, at76_work_submit_rx);
 	INIT_DELAYED_WORK(&priv->dwork_hw_scan, at76_dwork_hw_scan);
 
-	priv->rx_tasklet.func = at76_rx_tasklet;
-	priv->rx_tasklet.data = 0;
+	tasklet_init(&priv->rx_tasklet, at76_rx_tasklet, 0);
 
 	priv->pm_mode = AT76_PM_OFF;
 	priv->pm_period = 0;
@@ -2243,6 +2252,7 @@ static int at76_init_new_device(struct at76_priv *priv,
 	priv->scan_min_time = DEF_SCAN_MIN_TIME;
 	priv->scan_max_time = DEF_SCAN_MAX_TIME;
 	priv->scan_mode = SCAN_TYPE_ACTIVE;
+	priv->device_unplugged = 0;
 
 	/* mac80211 initialisation */
 	priv->hw->wiphy->max_scan_ssids = 1;
@@ -2284,13 +2294,12 @@ static void at76_delete_device(struct at76_priv *priv)
 	/* The device is gone, don't bother turning it off */
 	priv->device_unplugged = 1;
 
-	if (priv->mac80211_registered)
-		ieee80211_unregister_hw(priv->hw);
+	tasklet_kill(&priv->rx_tasklet);
 
-	/* assuming we used keventd, it must quiesce too */
-	flush_scheduled_work();
-
-	kfree(priv->bulk_out_buffer);
+	if (priv->mac80211_registered) {
+		flush_workqueue(priv->hw->workqueue);
+		ieee80211_unregister_hw(priv->hw);
+	}
 
 	if (priv->tx_urb) {
 		usb_kill_urb(priv->tx_urb);
@@ -2303,6 +2312,8 @@ static void at76_delete_device(struct at76_priv *priv)
 
 	at76_dbg(DBG_PROC_ENTRY, "%s: unlinked urbs", __func__);
 
+	kfree(priv->bulk_out_buffer);
+
 	if (priv->rx_skb)
 		kfree_skb(priv->rx_skb);
 
#3 lore raw
Quoted 11 lines · Jason Andryuk
Quoted 8 lines

Unfortunately the patch is corrupted:

patching file drivers/net/wireless/at76c50x-usb.c Hunk #1 FAILED at 1860.
Hunk #2 FAILED at 1900.
patch: **** malformed patch at line 80: ieee80211_hw *hw,

Can you resend it?

I the problem was line wrapping from gmail's web interface.

Quoted 7 lines

---

flush_workqueue needs to be called instead of the generic one and the associated functions need to be modified to prevent re-adding themselves to the workqueue.

The rx_tasklet is also killed in the small (?) chance it is scheduled.

Thanks, the patch was now ok. I'll test the patch and if I found no issues, I'll send this to John. This might take few days, though.

Signature · 1 line
Kalle Valo