System freeze on reboot - general protection fault
Subsystems (5)
Hi
Recently I'm getting complete system freeze during reboot - usually just after iptables frees modules the oops strikes in - oops is taken via serial console on the second machine - as this machine is completely dead in this moment.
I'm using a lot of memory debug options - so this might be the result?
- looks like some memory gets mangled??. For some time I've
suspected kmemleak - thus I've been not reporting it when it happened for the first time (few weeks already) - but this kernel is compiled without kmemleak and still crashes.
Also the crash will not happen with booting to single mode - the full startup (without Xorg) must happen to get this crash on reboot.
My machine is T61, 4GB, C2D, x86_64
Kernel vanilla git commit: 85dfd81dc57e8183a277ddd7a56aa65c96f3f487 with two very small unrelated patches on top of this. .config attached.
general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC last sysfs file: /sys/module/nf_conntrack/refcnt CPU 1 Modules linked in: sit tunnel4 bridge stp llc rfcomm sco l2cap sunrpc
autofs4 ipv6 binfmt_misc loop dm_mirror dm_region_hash dm_log dm_mod kvm_intel kvm i915 drm i2c_algo_bit uinput arc4 ecb cryptomgr aead pcompress crypto_blkcipher crypto_hash crypto_algapi snd_hda_codec_analog iwl3945 snd_hda_intel snd_hda_codec snd_seq_oss snd_seq_midi_event iwlcore snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss btusb snd_pcm bluetooth mac80211 snd_timer rtc_cmos cfg80211 snd thinkpad_acpi rfkill rtc_core sdhci_pci sdhci psmouse video soundcore rtc_lib backlight snd_page_alloc usbhid hid mmc_core sr_mod serio_raw evdev output nvram iTCO_wdt iTCO_vendor_support button cdrom led_class i2c_i801 e1000e battery ac intel_agp i2c_core uhci_hcd ohci_hcd ehci_hcd usbcore [last unloaded: nf_conntrack]
Pid: 0, comm: swapper Not tainted 2.6.31-rc5-00472-g3d32107 #4 6464CTO
RIP: 0010:[<ffffffff811d9c69>] [<ffffffff811d9c69>] strnlen+0x9/0x40 RSP: 0018:ffff88002efdfa20 EFLAGS: 00010086 RAX: ffffffff8149a952 RBX: ffffffff81817cc0 RCX: 0000000000000002 RDX: 6b6b6b6b6b6b6b6b RSI: ffffffffffffffff RDI: 6b6b6b6b6b6b6b6b RBP: ffff88002efdfa20 R08: 0000000000000073 R09: 0000000000000000 R10: 0000000000000000 R11: ffffffff8104cfd8 R12: ffffffff818178c7 R13: 6b6b6b6b6b6b6b6b R14: 00000000ffffffff R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88002efdc000(0000) knlGS:0000000000000000 CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b CR2: 000000000240d190 CR3: 0000000001001000 CR4: 00000000000026e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process swapper (pid: 0, threadinfo ffff88013b95a000, task ffff88013b9346c0) Stack: ffff88002efdfa60 ffffffff811db9c0 0000000000000033 ffffffff818178c7 <0> ffffffff8148af64 ffffffff8148af62 ffff88002efdfbd0 ffffffff81817cc0 <0> ffff88002efdfb00 ffffffff811dc800 0000000000000004 0000000affffffff Call Trace: <IRQ> [<ffffffff811db9c0>] string+0x40/0x100 [<ffffffff811dc800>] vsnprintf+0x310/0x5d0 [<ffffffff811dcbd1>] vscnprintf+0x11/0x30 [<ffffffff8104d006>] vprintk+0x86/0x460 [<ffffffff811dc800>] ? vsnprintf+0x310/0x5d0 [<ffffffff8137d700>] printk+0x41/0x49 [<ffffffff810f9d7e>] slab_bug+0x7e/0xa0 [<ffffffff81380bb7>] ? _spin_unlock_irqrestore+0x57/0x70 [<ffffffff810f9e91>] slab_err+0x71/0xb0 [<ffffffff81380b50>] ? _spin_unlock_irq+0x30/0x40 [<ffffffff810fa2b9>] slab_pad_check+0x129/0x160 [<ffffffff810fc0be>] __free_slab+0xde/0x170 [<ffffffff810a3230>] ? __rcu_process_callbacks+0xa0/0x350 [<ffffffff810fc1a6>] rcu_free_slab+0x16/0x20 [<ffffffff810a3327>] __rcu_process_callbacks+0x197/0x350 [<ffffffff810a350b>] rcu_process_callbacks+0x2b/0x50 [<ffffffff81052e7c>] __do_softirq+0xbc/0x200 [<ffffffff8100d2dc>] call_softirq+0x1c/0x50 [<ffffffff8100eb65>] do_softirq+0x75/0xb0 [<ffffffff81052935>] irq_exit+0x95/0xa0 [<ffffffff81385f15>] do_IRQ+0x75/0xf0 [<ffffffff8100cad3>] ret_from_intr+0x0/0xf <EOI> [<ffffffff8123e60b>] ? acpi_idle_enter_bm+0x24d/0x27f [<ffffffff8123e608>] ? acpi_idle_enter_bm+0x24a/0x27f [<ffffffff812dd283>] ? cpuidle_idle_call+0xa3/0x100 [<ffffffff8100ae80>] ? cpu_idle+0x70/0xc0 [<ffffffff81379eea>] ? start_secondary+0x189/0x18e Code: c9 c3 55 31 c0 48 89 e5 48 89 fa 80 3f 00 74 10 66 90 48 ff c2
80 3a 00 75 f8 48 89 d0 48 29 f8 c9 c3 55 48 85 f6 48 89 e5 74 2c <80> 3f 00 74 27 48 ff ce 48 89 f8 eb 12 66 2e 0f 1f 84 00 00 00 RIP [<ffffffff811d9c69>] strnlen+0x9/0x40
RSP <ffff88002efdfa20>
---[ end trace a1644c95984b956d ]--- Kernel panic - not syncing: Fatal exception in interrupt Pid: 0, comm: swapper Tainted: G D 2.6.31-rc5-00472-g3d32107 #4 Call Trace: <IRQ> [<ffffffff8137d609>] panic+0x78/0x12e [<ffffffff81380bb7>] ? _spin_unlock_irqrestore+0x57/0x70 [<ffffffff8138242a>] oops_end+0xda/0xe0 [<ffffffff8101013b>] die+0x5b/0x90 [<ffffffff81382242>] do_general_protection+0x152/0x160 [<ffffffff8138163f>] general_protection+0x1f/0x30 [<ffffffff8104cfd8>] ? vprintk+0x58/0x460 [<ffffffff811d9c69>] ? strnlen+0x9/0x40 [<ffffffff811db9c0>] string+0x40/0x100 [<ffffffff811dc800>] vsnprintf+0x310/0x5d0 [<ffffffff811dcbd1>] vscnprintf+0x11/0x30 [<ffffffff8104d006>] vprintk+0x86/0x460 [<ffffffff811dc800>] ? vsnprintf+0x310/0x5d0 [<ffffffff8137d700>] printk+0x41/0x49 [<ffffffff810f9d7e>] slab_bug+0x7e/0xa0 [<ffffffff81380bb7>] ? _spin_unlock_irqrestore+0x57/0x70 [<ffffffff810f9e91>] slab_err+0x71/0xb0 [<ffffffff81380b50>] ? _spin_unlock_irq+0x30/0x40 [<ffffffff810fa2b9>] slab_pad_check+0x129/0x160 [<ffffffff810fc0be>] __free_slab+0xde/0x170 [<ffffffff810a3230>] ? __rcu_process_callbacks+0xa0/0x350 [<ffffffff810fc1a6>] rcu_free_slab+0x16/0x20 [<ffffffff810a3327>] __rcu_process_callbacks+0x197/0x350 [<ffffffff810a350b>] rcu_process_callbacks+0x2b/0x50 [<ffffffff81052e7c>] __do_softirq+0xbc/0x200 [<ffffffff8100d2dc>] call_softirq+0x1c/0x50 [<ffffffff8100eb65>] do_softirq+0x75/0xb0 [<ffffffff81052935>] irq_exit+0x95/0xa0 [<ffffffff81385f15>] do_IRQ+0x75/0xf0 [<ffffffff8100cad3>] ret_from_intr+0x0/0xf <EOI> [<ffffffff8123e60b>] ? acpi_idle_enter_bm+0x24d/0x27f [<ffffffff8123e608>] ? acpi_idle_enter_bm+0x24a/0x27f [<ffffffff812dd283>] ? cpuidle_idle_call+0xa3/0x100 [<ffffffff8100ae80>] ? cpu_idle+0x70/0xc0 [<ffffffff81379eea>] ? start_secondary+0x189/0x18e
#
# Automatically generated make config: don't edit # Linux kernel version: 2.6.31-rc5
# Tue Aug 11 13:46:11 2009
#CONFIG_64BIT=y
# CONFIG_X86_32 is not setCONFIG_X86_64=yCONFIG_X86=yCONFIG_OUTPUT_FORMAT="elf64-x86-64" CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig" CONFIG_GENERIC_TIME=yCONFIG_GENERIC_CMOS_UPDATE=y CONFIG_CLOCKSOURCE_WATCHDOG=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_FAST_CMPXCHG_LOCAL=yCONFIG_MMU=yCONFIG_ZONE_DMA=yCONFIG_GENERIC_ISA_DMA=yCONFIG_GENERIC_IOMAP=yCONFIG_GENERIC_BUG=y CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y CONFIG_GENERIC_HWEIGHT=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_ARCH_HAS_CPU_RELAX=y CONFIG_ARCH_HAS_DEFAULT_IDLE=y CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y CONFIG_HAVE_SETUP_PER_CPU_AREA=y CONFIG_HAVE_DYNAMIC_PER_CPU_AREA=y CONFIG_HAVE_CPUMASK_OF_CPU_MAP=y CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=yCONFIG_ZONE_DMA32=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_AUDIT_ARCH=y CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_PENDING_IRQ=y CONFIG_USE_GENERIC_SMP_HELPERS=y CONFIG_X86_64_SMP=yCONFIG_X86_HT=yCONFIG_X86_TRAMPOLINE=y
# CONFIG_KTIME_SCALAR is not set CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_CONSTRUCTORS=y
#
# General setup
#CONFIG_EXPERIMENTAL=yCONFIG_LOCK_KERNEL=yCONFIG_INIT_ENV_ARG_LIMIT=32CONFIG_LOCALVERSION=""CONFIG_LOCALVERSION_AUTO=yCONFIG_HAVE_KERNEL_GZIP=yCONFIG_HAVE_KERNEL_BZIP2=yCONFIG_HAVE_KERNEL_LZMA=yCONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not setCONFIG_SWAP=yCONFIG_SYSVIPC=yCONFIG_SYSVIPC_SYSCTL=yCONFIG_POSIX_MQUEUE=yCONFIG_POSIX_MQUEUE_SYSCTL=yCONFIG_BSD_PROCESS_ACCT=yCONFIG_BSD_PROCESS_ACCT_V3=yCONFIG_TASKSTATS=yCONFIG_TASK_DELAY_ACCT=yCONFIG_TASK_XACCT=yCONFIG_TASK_IO_ACCOUNTING=yCONFIG_AUDIT=yCONFIG_AUDITSYSCALL=yCONFIG_AUDIT_TREE=y
#
# RCU Subsystem
#CONFIG_CLASSIC_RCU=y
# CONFIG_TREE_RCU is not set
# CONFIG_PREEMPT_RCU is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_PREEMPT_RCU_TRACE is not setCONFIG_IKCONFIG=mCONFIG_IKCONFIG_PROC=yCONFIG_LOG_BUF_SHIFT=18CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
# CONFIG_GROUP_SCHED is not set
# CONFIG_CGROUPS is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not setCONFIG_RELAY=y
# CONFIG_NAMESPACES is not setCONFIG_BLK_DEV_INITRD=yCONFIG_INITRAMFS_SOURCE=""CONFIG_RD_GZIP=yCONFIG_RD_BZIP2=y
# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not setCONFIG_SYSCTL=yCONFIG_ANON_INODES=yCONFIG_EMBEDDED=yCONFIG_UID16=yCONFIG_SYSCTL_SYSCALL=yCONFIG_KALLSYMS=yCONFIG_KALLSYMS_ALL=yCONFIG_KALLSYMS_EXTRA_PASS=yCONFIG_HOTPLUG=yCONFIG_PRINTK=yCONFIG_BUG=yCONFIG_ELF_CORE=y
# CONFIG_PCSPKR_PLATFORM is not setCONFIG_BASE_FULL=yCONFIG_FUTEX=yCONFIG_EPOLL=yCONFIG_SIGNALFD=yCONFIG_TIMERFD=yCONFIG_EVENTFD=yCONFIG_SHMEM=yCONFIG_AIO=yCONFIG_HAVE_PERF_COUNTERS=y
#
# Performance Counters
#CONFIG_PERF_COUNTERS=y
# CONFIG_EVENT_PROFILE is not setCONFIG_VM_EVENT_COUNTERS=yCONFIG_PCI_QUIRKS=yCONFIG_SLUB_DEBUG=y
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not setCONFIG_SLUB=y
# CONFIG_SLOB is not setCONFIG_PROFILING=yCONFIG_TRACEPOINTS=yCONFIG_MARKERS=yCONFIG_OPROFILE=m
# CONFIG_OPROFILE_IBS is not setCONFIG_HAVE_OPROFILE=yCONFIG_KPROBES=yCONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=yCONFIG_KRETPROBES=yCONFIG_HAVE_IOREMAP_PROT=yCONFIG_HAVE_KPROBES=yCONFIG_HAVE_KRETPROBES=yCONFIG_HAVE_ARCH_TRACEHOOK=yCONFIG_HAVE_DMA_ATTRS=yCONFIG_HAVE_DMA_API_DEBUG=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not setCONFIG_SLABINFO=yCONFIG_RT_MUTEXES=yCONFIG_BASE_SMALL=0CONFIG_MODULES=yCONFIG_MODULE_FORCE_LOAD=yCONFIG_MODULE_UNLOAD=yCONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not setCONFIG_STOP_MACHINE=yCONFIG_BLOCK=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not setCONFIG_BLOCK_COMPAT=y
#
# IO Schedulers
#CONFIG_IOSCHED_NOOP=yCONFIG_IOSCHED_AS=yCONFIG_IOSCHED_DEADLINE=yCONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not setCONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not setCONFIG_DEFAULT_IOSCHED="cfq"CONFIG_PREEMPT_NOTIFIERS=yCONFIG_FREEZER=y
#
# Processor type and features
#CONFIG_TICK_ONESHOT=yCONFIG_NO_HZ=yCONFIG_HIGH_RES_TIMERS=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_SMP=y
# CONFIG_SPARSE_IRQ is not set CONFIG_X86_MPPARSE=y CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_VSMP is not set CONFIG_SCHED_OMIT_FRAME_POINTER=y
# CONFIG_PARAVIRT_GUEST is not set CONFIG_MEMTEST=y
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not setCONFIG_MCORE2=y
# CONFIG_GENERIC_CPU is not set CONFIG_X86_CPU=y CONFIG_X86_L1_CACHE_BYTES=64 CONFIG_X86_INTERNODE_CACHE_BYTES=64 CONFIG_X86_CMPXCHG=y CONFIG_X86_L1_CACHE_SHIFT=6 CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_INTEL_USERCOPY=y CONFIG_X86_USE_PPRO_CHECKSUM=y CONFIG_X86_P6_NOP=yCONFIG_X86_TSC=yCONFIG_X86_CMPXCHG64=yCONFIG_X86_CMOV=y CONFIG_X86_MINIMUM_CPU_FAMILY=64 CONFIG_X86_DEBUGCTLMSR=y
# CONFIG_PROCESSOR_SELECT is not set CONFIG_CPU_SUP_INTEL=yCONFIG_CPU_SUP_AMD=y CONFIG_CPU_SUP_CENTAUR=y
# CONFIG_X86_DS is not set CONFIG_HPET_TIMER=y CONFIG_HPET_EMULATE_RTC=yCONFIG_DMI=yCONFIG_GART_IOMMU=y
# CONFIG_CALGARY_IOMMU is not set
# CONFIG_AMD_IOMMU is not set CONFIG_SWIOTLB=yCONFIG_IOMMU_HELPER=y
# CONFIG_IOMMU_API is not set
# CONFIG_MAXSMP is not setCONFIG_NR_CPUS=4
# CONFIG_SCHED_SMT is not set CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set CONFIG_X86_LOCAL_APIC=yCONFIG_X86_IO_APIC=y
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set CONFIG_X86_MCE=yCONFIG_X86_NEW_MCE=yCONFIG_X86_MCE_INTEL=yCONFIG_X86_MCE_AMD=y CONFIG_X86_MCE_THRESHOLD=y
# CONFIG_X86_MCE_INJECT is not set CONFIG_X86_THERMAL_VECTOR=y
# CONFIG_I8K is not setCONFIG_MICROCODE=mCONFIG_MICROCODE_INTEL=y
# CONFIG_MICROCODE_AMD is not set CONFIG_MICROCODE_OLD_INTERFACE=y CONFIG_X86_MSR=mCONFIG_X86_CPUID=mCONFIG_X86_CPU_DEBUG=m CONFIG_ARCH_PHYS_ADDR_T_64BIT=y CONFIG_DIRECT_GBPAGES=y
# CONFIG_NUMA is not set CONFIG_ARCH_SPARSEMEM_DEFAULT=y CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set CONFIG_SPARSEMEM_MANUAL=yCONFIG_SPARSEMEM=y CONFIG_HAVE_MEMORY_PRESENT=y CONFIG_SPARSEMEM_EXTREME=y CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y CONFIG_SPARSEMEM_VMEMMAP=y
#
# Memory hotplug is currently incompatible with Software Suspend #CONFIG_PAGEFLAGS_EXTENDED=yCONFIG_SPLIT_PTLOCK_CPUS=4CONFIG_PHYS_ADDR_T_64BIT=yCONFIG_ZONE_DMA_FLAG=1CONFIG_BOUNCE=yCONFIG_VIRT_TO_BUS=yCONFIG_HAVE_MLOCK=yCONFIG_HAVE_MLOCKED_PAGE_BIT=yCONFIG_MMU_NOTIFIER=y CONFIG_DEFAULT_MMAP_MIN_ADDR=4096 CONFIG_X86_CHECK_BIOS_CORRUPTION=y CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y CONFIG_X86_RESERVE_LOW_64K=yCONFIG_MTRR=yCONFIG_MTRR_SANITIZER=y CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=1 CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1 CONFIG_X86_PAT=yCONFIG_EFI=y
# CONFIG_SECCOMP is not set
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not setCONFIG_HZ_300=y
# CONFIG_HZ_1000 is not setCONFIG_HZ=300CONFIG_SCHED_HRTICK=yCONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
# CONFIG_KEXEC_JUMP is not set CONFIG_PHYSICAL_START=0x200000
# CONFIG_RELOCATABLE is not set CONFIG_PHYSICAL_ALIGN=0x1000000CONFIG_HOTPLUG_CPU=y
# CONFIG_COMPAT_VDSO is not setCONFIG_CMDLINE_BOOL=yCONFIG_CMDLINE=""
# CONFIG_CMDLINE_OVERRIDE is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
#
# Power management and ACPI options
#CONFIG_ARCH_HIBERNATION_HEADER=yCONFIG_PM=y
# CONFIG_PM_DEBUG is not setCONFIG_PM_SLEEP_SMP=yCONFIG_PM_SLEEP=yCONFIG_SUSPEND=yCONFIG_SUSPEND_FREEZER=yCONFIG_HIBERNATION_NVS=yCONFIG_HIBERNATION=yCONFIG_PM_STD_PARTITION=""CONFIG_ACPI=yCONFIG_ACPI_SLEEP=yCONFIG_ACPI_PROCFS=yCONFIG_ACPI_PROCFS_POWER=yCONFIG_ACPI_SYSFS_POWER=yCONFIG_ACPI_PROC_EVENT=yCONFIG_ACPI_AC=mCONFIG_ACPI_BATTERY=mCONFIG_ACPI_BUTTON=mCONFIG_ACPI_VIDEO=mCONFIG_ACPI_FAN=mCONFIG_ACPI_DOCK=yCONFIG_ACPI_PROCESSOR=yCONFIG_ACPI_HOTPLUG_CPU=yCONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_CUSTOM_DSDT is not setCONFIG_ACPI_BLACKLIST_YEAR=0CONFIG_ACPI_DEBUG=y
# CONFIG_ACPI_DEBUG_FUNC_TRACE is not setCONFIG_ACPI_PCI_SLOT=mCONFIG_X86_PM_TIMER=yCONFIG_ACPI_CONTAINER=yCONFIG_ACPI_SBS=m
#
# CPU Frequency scaling
#CONFIG_CPU_FREQ=yCONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set CONFIG_CPU_FREQ_STAT=y CONFIG_CPU_FREQ_STAT_DETAILS=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_POWERSAVE=m CONFIG_CPU_FREQ_GOV_USERSPACE=m CONFIG_CPU_FREQ_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
#
# CPUFreq processor drivers
#CONFIG_X86_ACPI_CPUFREQ=y
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not setCONFIG_X86_P4_CLOCKMOD=m
#
# shared options # CONFIG_X86_SPEEDSTEP_LIB=m CONFIG_CPU_IDLE=y CONFIG_CPU_IDLE_GOV_LADDER=y CONFIG_CPU_IDLE_GOV_MENU=y
#
# Memory power savings
#
# CONFIG_I7300_IDLE is not set
#
# Bus options (PCI etc.)
#CONFIG_PCI=yCONFIG_PCI_DIRECT=yCONFIG_PCI_MMCONFIG=yCONFIG_PCI_DOMAINS=y
# CONFIG_DMAR is not set
# CONFIG_INTR_REMAP is not setCONFIG_PCIEPORTBUS=yCONFIG_HOTPLUG_PCI_PCIE=mCONFIG_PCIEAER=y
# CONFIG_PCIE_ECRC is not set
# CONFIG_PCIEAER_INJECT is not setCONFIG_PCIEASPM=y
# CONFIG_PCIEASPM_DEBUG is not setCONFIG_ARCH_SUPPORTS_MSI=yCONFIG_PCI_MSI=yCONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
# CONFIG_HT_IRQ is not set
# CONFIG_PCI_IOV is not setCONFIG_ISA_DMA_API=yCONFIG_K8_NB=yCONFIG_PCCARD=m
# CONFIG_PCMCIA_DEBUG is not setCONFIG_PCMCIA=mCONFIG_PCMCIA_LOAD_CIS=yCONFIG_PCMCIA_IOCTL=yCONFIG_CARDBUS=y
#
# PC-card bridges
#
# CONFIG_YENTA is not set
# CONFIG_PD6729 is not set
# CONFIG_I82092 is not setCONFIG_HOTPLUG_PCI=m
# CONFIG_HOTPLUG_PCI_FAKE is not setCONFIG_HOTPLUG_PCI_ACPI=mCONFIG_HOTPLUG_PCI_ACPI_IBM=m
# CONFIG_HOTPLUG_PCI_CPCI is not set
# CONFIG_HOTPLUG_PCI_SHPC is not set
#
# Executable file formats / Emulations
#CONFIG_BINFMT_ELF=yCONFIG_COMPAT_BINFMT_ELF=yCONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
# CONFIG_HAVE_AOUT is not setCONFIG_BINFMT_MISC=mCONFIG_IA32_EMULATION=yCONFIG_IA32_AOUT=mCONFIG_COMPAT=yCONFIG_COMPAT_FOR_U64_ALIGNMENT=yCONFIG_SYSVIPC_COMPAT=yCONFIG_NET=y
#
# Networking options
#CONFIG_PACKET=yCONFIG_PACKET_MMAP=yCONFIG_UNIX=yCONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not setCONFIG_INET=yCONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set CONFIG_IP_FIB_HASH=yCONFIG_IP_PNP=yCONFIG_IP_PNP_DHCP=yCONFIG_IP_PNP_BOOTP=y
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set CONFIG_IP_MROUTE=y
# CONFIG_IP_PIMSM_V1 is not set
# CONFIG_IP_PIMSM_V2 is not set
# CONFIG_ARPD is not setCONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set CONFIG_INET_TUNNEL=m
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set CONFIG_TCP_CONG_ADVANCED=y CONFIG_TCP_CONG_BIC=mCONFIG_TCP_CONG_CUBIC=y CONFIG_TCP_CONG_WESTWOOD=m CONFIG_TCP_CONG_HTCP=m
# CONFIG_TCP_CONG_HSTCP is not set
# CONFIG_TCP_CONG_HYBLA is not set
# CONFIG_TCP_CONG_VEGAS is not set
# CONFIG_TCP_CONG_SCALABLE is not set
# CONFIG_TCP_CONG_LP is not set
# CONFIG_TCP_CONG_VENO is not set
# CONFIG_TCP_CONG_YEAH is not set
# CONFIG_TCP_CONG_ILLINOIS is not set
# CONFIG_DEFAULT_BIC is not set CONFIG_DEFAULT_CUBIC=y
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_RENO is not set CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not setCONFIG_IPV6=m
# CONFIG_IPV6_PRIVACY is not set
# CONFIG_IPV6_ROUTER_PREF is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not set
# CONFIG_INET6_IPCOMP is not set
# CONFIG_IPV6_MIP6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set CONFIG_INET6_XFRM_MODE_TRANSPORT=m CONFIG_INET6_XFRM_MODE_TUNNEL=m CONFIG_INET6_XFRM_MODE_BEET=m
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set CONFIG_IPV6_SIT=m CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETLABEL is not set CONFIG_NETWORK_SECMARK=yCONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set CONFIG_NETFILTER_ADVANCED=y CONFIG_BRIDGE_NETFILTER=y
#
# Core Netfilter Configuration
#CONFIG_NETFILTER_NETLINK=m
# CONFIG_NETFILTER_NETLINK_QUEUE is not set CONFIG_NETFILTER_NETLINK_LOG=m CONFIG_NF_CONNTRACK=mCONFIG_NF_CT_ACCT=y CONFIG_NF_CONNTRACK_MARK=y CONFIG_NF_CONNTRACK_SECMARK=y CONFIG_NF_CONNTRACK_EVENTS=y
# CONFIG_NF_CT_PROTO_DCCP is not set
# CONFIG_NF_CT_PROTO_SCTP is not set
# CONFIG_NF_CT_PROTO_UDPLITE is not set
# CONFIG_NF_CONNTRACK_AMANDA is not set CONFIG_NF_CONNTRACK_FTP=m
# CONFIG_NF_CONNTRACK_H323 is not set
# CONFIG_NF_CONNTRACK_IRC is not set
# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set # CONFIG_NF_CONNTRACK_PPTP is not set
# CONFIG_NF_CONNTRACK_SANE is not set
# CONFIG_NF_CONNTRACK_SIP is not set
# CONFIG_NF_CONNTRACK_TFTP is not set CONFIG_NF_CT_NETLINK=m
# CONFIG_NETFILTER_TPROXY is not set CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set # CONFIG_NETFILTER_XT_TARGET_CONNSECMARK is not set # CONFIG_NETFILTER_XT_TARGET_DSCP is not set CONFIG_NETFILTER_XT_TARGET_HL=m
# CONFIG_NETFILTER_XT_TARGET_LED is not set CONFIG_NETFILTER_XT_TARGET_MARK=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set # CONFIG_NETFILTER_XT_TARGET_SECMARK is not set # CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set # CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set # CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set # CONFIG_NETFILTER_XT_MATCH_COMMENT is not set # CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set # CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set CONFIG_NETFILTER_XT_MATCH_CONNMARK=m CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
# CONFIG_NETFILTER_XT_MATCH_DCCP is not set # CONFIG_NETFILTER_XT_MATCH_DSCP is not set # CONFIG_NETFILTER_XT_MATCH_ESP is not set # CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set # CONFIG_NETFILTER_XT_MATCH_HELPER is not set CONFIG_NETFILTER_XT_MATCH_HL=m
# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set # CONFIG_NETFILTER_XT_MATCH_LENGTH is not set # CONFIG_NETFILTER_XT_MATCH_LIMIT is not set # CONFIG_NETFILTER_XT_MATCH_MAC is not set # CONFIG_NETFILTER_XT_MATCH_MARK is not set # CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set # CONFIG_NETFILTER_XT_MATCH_OWNER is not set CONFIG_NETFILTER_XT_MATCH_POLICY=m
# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set # CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set # CONFIG_NETFILTER_XT_MATCH_QUOTA is not set # CONFIG_NETFILTER_XT_MATCH_RATEEST is not set # CONFIG_NETFILTER_XT_MATCH_REALM is not set # CONFIG_NETFILTER_XT_MATCH_RECENT is not set # CONFIG_NETFILTER_XT_MATCH_SCTP is not set CONFIG_NETFILTER_XT_MATCH_STATE=m
# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set # CONFIG_NETFILTER_XT_MATCH_STRING is not set # CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set # CONFIG_NETFILTER_XT_MATCH_TIME is not set # CONFIG_NETFILTER_XT_MATCH_U32 is not set # CONFIG_NETFILTER_XT_MATCH_OSF is not set # CONFIG_IP_VS is not set
#
# IP: Netfilter Configuration
#CONFIG_NF_DEFRAG_IPV4=mCONFIG_NF_CONNTRACK_IPV4=mCONFIG_NF_CONNTRACK_PROC_COMPAT=y
# CONFIG_IP_NF_QUEUE is not setCONFIG_IP_NF_IPTABLES=mCONFIG_IP_NF_MATCH_ADDRTYPE=mCONFIG_IP_NF_MATCH_AH=mCONFIG_IP_NF_MATCH_ECN=mCONFIG_IP_NF_MATCH_TTL=mCONFIG_IP_NF_FILTER=mCONFIG_IP_NF_TARGET_REJECT=mCONFIG_IP_NF_TARGET_LOG=mCONFIG_IP_NF_TARGET_ULOG=mCONFIG_NF_NAT=mCONFIG_NF_NAT_NEEDED=yCONFIG_IP_NF_TARGET_MASQUERADE=m
# CONFIG_IP_NF_TARGET_NETMAP is not setCONFIG_IP_NF_TARGET_REDIRECT=m
# CONFIG_NF_NAT_SNMP_BASIC is not setCONFIG_NF_NAT_FTP=m
# CONFIG_NF_NAT_IRC is not set
# CONFIG_NF_NAT_TFTP is not set
# CONFIG_NF_NAT_AMANDA is not set
# CONFIG_NF_NAT_PPTP is not set
# CONFIG_NF_NAT_H323 is not set
# CONFIG_NF_NAT_SIP is not setCONFIG_IP_NF_MANGLE=m
# CONFIG_IP_NF_TARGET_CLUSTERIP is not setCONFIG_IP_NF_TARGET_ECN=mCONFIG_IP_NF_TARGET_TTL=m
# CONFIG_IP_NF_RAW is not set
# CONFIG_IP_NF_SECURITY is not setCONFIG_IP_NF_ARPTABLES=mCONFIG_IP_NF_ARPFILTER=mCONFIG_IP_NF_ARP_MANGLE=m
#
# IPv6: Netfilter Configuration
#CONFIG_NF_CONNTRACK_IPV6=m
# CONFIG_IP6_NF_QUEUE is not setCONFIG_IP6_NF_IPTABLES=m
# CONFIG_IP6_NF_MATCH_AH is not set
# CONFIG_IP6_NF_MATCH_EUI64 is not set
# CONFIG_IP6_NF_MATCH_FRAG is not set
# CONFIG_IP6_NF_MATCH_OPTS is not set
# CONFIG_IP6_NF_MATCH_HL is not set
# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set
# CONFIG_IP6_NF_MATCH_MH is not set
# CONFIG_IP6_NF_MATCH_RT is not set
# CONFIG_IP6_NF_TARGET_HL is not set
# CONFIG_IP6_NF_TARGET_LOG is not set
# CONFIG_IP6_NF_FILTER is not set
# CONFIG_IP6_NF_MANGLE is not set
# CONFIG_IP6_NF_RAW is not set
# CONFIG_IP6_NF_SECURITY is not setCONFIG_BRIDGE_NF_EBTABLES=mCONFIG_BRIDGE_EBT_BROUTE=mCONFIG_BRIDGE_EBT_T_FILTER=mCONFIG_BRIDGE_EBT_T_NAT=mCONFIG_BRIDGE_EBT_802_3=mCONFIG_BRIDGE_EBT_AMONG=mCONFIG_BRIDGE_EBT_ARP=mCONFIG_BRIDGE_EBT_IP=m
# CONFIG_BRIDGE_EBT_IP6 is not setCONFIG_BRIDGE_EBT_LIMIT=mCONFIG_BRIDGE_EBT_MARK=mCONFIG_BRIDGE_EBT_PKTTYPE=mCONFIG_BRIDGE_EBT_STP=mCONFIG_BRIDGE_EBT_VLAN=mCONFIG_BRIDGE_EBT_ARPREPLY=mCONFIG_BRIDGE_EBT_DNAT=mCONFIG_BRIDGE_EBT_MARK_T=mCONFIG_BRIDGE_EBT_REDIRECT=mCONFIG_BRIDGE_EBT_SNAT=mCONFIG_BRIDGE_EBT_LOG=mCONFIG_BRIDGE_EBT_ULOG=m
# CONFIG_BRIDGE_EBT_NFLOG is not set
# CONFIG_IP_DCCP is not setCONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not setCONFIG_SCTP_HMAC_NONE=y
# CONFIG_SCTP_HMAC_SHA1 is not set
# CONFIG_SCTP_HMAC_MD5 is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not setCONFIG_STP=mCONFIG_BRIDGE=m
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not setCONFIG_LLC=m
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
#
# Network testing
#CONFIG_NET_PKTGEN=m
# CONFIG_NET_TCPPROBE is not set
# CONFIG_NET_DROP_MONITOR is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not setCONFIG_IRDA=m
#
# IrDA protocols
#
# CONFIG_IRLAN is not set
# CONFIG_IRCOMM is not set
# CONFIG_IRDA_ULTRA is not set
#
# IrDA options
#
# CONFIG_IRDA_CACHE_LAST_LSAP is not set
# CONFIG_IRDA_FAST_RR is not set
# CONFIG_IRDA_DEBUG is not set
#
# Infrared-port device drivers
#
#
# SIR device drivers
#
# CONFIG_IRTTY_SIR is not set
#
# Dongle support
#
# CONFIG_KINGSUN_DONGLE is not set
# CONFIG_KSDAZZLE_DONGLE is not set
# CONFIG_KS959_DONGLE is not set
#
# FIR device drivers
#
# CONFIG_USB_IRDA is not set
# CONFIG_SIGMATEL_FIR is not set
# CONFIG_NSC_FIR is not set
# CONFIG_WINBOND_FIR is not set
# CONFIG_SMC_IRCC_FIR is not set
# CONFIG_ALI_FIR is not set
# CONFIG_VLSI_FIR is not set
# CONFIG_VIA_FIR is not set
# CONFIG_MCS_FIR is not setCONFIG_BT=mCONFIG_BT_L2CAP=mCONFIG_BT_SCO=mCONFIG_BT_RFCOMM=mCONFIG_BT_RFCOMM_TTY=y
# CONFIG_BT_BNEP is not setCONFIG_BT_HIDP=m
#
# Bluetooth device drivers
#CONFIG_BT_HCIBTUSB=m
# CONFIG_BT_HCIBTSDIO is not set
# CONFIG_BT_HCIUART is not set
# CONFIG_BT_HCIBCM203X is not set
# CONFIG_BT_HCIBPA10X is not set
# CONFIG_BT_HCIBFUSB is not set
# CONFIG_BT_HCIDTL1 is not set
# CONFIG_BT_HCIBT3C is not set
# CONFIG_BT_HCIBLUECARD is not set
# CONFIG_BT_HCIBTUART is not set
# CONFIG_BT_HCIVHCI is not set
# CONFIG_AF_RXRPC is not setCONFIG_WIRELESS=yCONFIG_CFG80211=m
# CONFIG_CFG80211_REG_DEBUG is not set
# CONFIG_CFG80211_DEBUGFS is not set
# CONFIG_WIRELESS_OLD_REGULATORY is not setCONFIG_WIRELESS_EXT=yCONFIG_WIRELESS_EXT_SYSFS=yCONFIG_LIB80211=m
# CONFIG_LIB80211_DEBUG is not setCONFIG_MAC80211=mCONFIG_MAC80211_DEFAULT_PS=yCONFIG_MAC80211_DEFAULT_PS_VALUE=1
#
# Rate control algorithm selection
#
# CONFIG_MAC80211_RC_PID is not setCONFIG_MAC80211_RC_MINSTREL=y
# CONFIG_MAC80211_RC_DEFAULT_PID is not setCONFIG_MAC80211_RC_DEFAULT_MINSTREL=yCONFIG_MAC80211_RC_DEFAULT="minstrel"CONFIG_MAC80211_LEDS=y
# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
# CONFIG_WIMAX is not setCONFIG_RFKILL=mCONFIG_RFKILL_LEDS=yCONFIG_RFKILL_INPUT=y
# CONFIG_NET_9P is not set
#
# Device Drivers
#
#
# Generic Driver Options
#CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"CONFIG_STANDALONE=yCONFIG_PREVENT_FIRMWARE_BUILD=yCONFIG_FW_LOADER=yCONFIG_FIRMWARE_IN_KERNEL=yCONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not setCONFIG_CONNECTOR=mCONFIG_MTD=m
# CONFIG_MTD_DEBUG is not setCONFIG_MTD_CONCAT=mCONFIG_MTD_PARTITIONS=yCONFIG_MTD_TESTS=mCONFIG_MTD_REDBOOT_PARTS=mCONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
# CONFIG_MTD_AR7_PARTS is not set
#
# User Modules And Translation Layers
#CONFIG_MTD_CHAR=mCONFIG_MTD_BLKDEVS=mCONFIG_MTD_BLOCK=m
# CONFIG_MTD_BLOCK_RO is not set
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
# CONFIG_RFD_FTL is not set
# CONFIG_SSFDC is not set
# CONFIG_MTD_OOPS is not set
#
# RAM/ROM/Flash chip drivers
#
# CONFIG_MTD_CFI is not set
# CONFIG_MTD_JEDECPROBE is not setCONFIG_MTD_MAP_BANK_WIDTH_1=yCONFIG_MTD_MAP_BANK_WIDTH_2=yCONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not setCONFIG_MTD_CFI_I1=yCONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set
#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
# CONFIG_MTD_TS5500 is not set
# CONFIG_MTD_INTEL_VR_NOR is not set
# CONFIG_MTD_PLATRAM is not set
#
# Self-contained MTD device drivers
#
# CONFIG_MTD_PMC551 is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not setCONFIG_MTD_MTDRAM=mCONFIG_MTDRAM_TOTAL_SIZE=4096CONFIG_MTDRAM_ERASE_SIZE=128CONFIG_MTD_BLOCK2MTD=m
#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
# CONFIG_MTD_NAND is not set
# CONFIG_MTD_ONENAND is not set
#
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
#
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
# CONFIG_PARPORT is not setCONFIG_PNP=yCONFIG_PNP_DEBUG_MESSAGES=y
#
# Protocols
#CONFIG_PNPACPI=yCONFIG_BLK_DEV=yCONFIG_BLK_DEV_FD=m
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not setCONFIG_BLK_DEV_LOOP=mCONFIG_BLK_DEV_CRYPTOLOOP=mCONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not setCONFIG_BLK_DEV_RAM=yCONFIG_BLK_DEV_RAM_COUNT=16CONFIG_BLK_DEV_RAM_SIZE=8192
# CONFIG_BLK_DEV_XIP is not setCONFIG_CDROM_PKTCDVD=mCONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
# CONFIG_ATA_OVER_ETH is not setCONFIG_VIRTIO_BLK=m
# CONFIG_BLK_DEV_HD is not setCONFIG_MISC_DEVICES=y
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_CB710_CORE is not setCONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI device support
#CONFIG_RAID_ATTRS=mCONFIG_SCSI=yCONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_SCSI_PROC_FS is not set
#
# SCSI support type (disk, tape, CD-ROM)
#CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not setCONFIG_BLK_DEV_SR=m
# CONFIG_BLK_DEV_SR_VENDOR is not setCONFIG_CHR_DEV_SG=yCONFIG_CHR_DEV_SCH=mCONFIG_SCSI_MULTI_LUN=yCONFIG_SCSI_CONSTANTS=yCONFIG_SCSI_LOGGING=yCONFIG_SCSI_SCAN_ASYNC=yCONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not setCONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not setCONFIG_ATA_ACPI=y
# CONFIG_SATA_PMP is not setCONFIG_SATA_AHCI=y
# CONFIG_SATA_SIL24 is not setCONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not setCONFIG_ATA_PIIX=y
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not setCONFIG_PATA_ACPI=m
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not setCONFIG_ATA_GENERIC=yCONFIG_PATA_HPT366=y
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not setCONFIG_PATA_MPIIX=yCONFIG_PATA_OLDPIIX=y
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PCMCIA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_PLATFORM is not set
# CONFIG_PATA_SCH is not setCONFIG_MD=yCONFIG_BLK_DEV_MD=mCONFIG_MD_LINEAR=mCONFIG_MD_RAID0=mCONFIG_MD_RAID1=m
# CONFIG_MD_RAID10 is not setCONFIG_MD_RAID456=mCONFIG_MD_RAID6_PQ=m
# CONFIG_MD_MULTIPATH is not setCONFIG_MD_FAULTY=mCONFIG_BLK_DEV_DM=mCONFIG_DM_DEBUG=yCONFIG_DM_CRYPT=mCONFIG_DM_SNAPSHOT=mCONFIG_DM_MIRROR=mCONFIG_DM_LOG_USERSPACE=mCONFIG_DM_ZERO=mCONFIG_DM_MULTIPATH=m
# CONFIG_DM_MULTIPATH_QL is not set
# CONFIG_DM_MULTIPATH_ST is not setCONFIG_DM_DELAY=mCONFIG_DM_UEVENT=yCONFIG_FUSION=yCONFIG_FUSION_SPI=y
# CONFIG_FUSION_FC is not set
# CONFIG_FUSION_SAS is not setCONFIG_FUSION_MAX_SGE=128CONFIG_FUSION_CTL=y
# CONFIG_FUSION_LOGGING is not set
#
# IEEE 1394 (FireWire) support
#
#
# You can enable one or both FireWire driver stacks. #
#
# See the help texts for more information. #
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=yCONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not setCONFIG_TUN=mCONFIG_VETH=m
# CONFIG_NET_SB1000 is not set
# CONFIG_ARCNET is not set
# CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=yCONFIG_MII=m
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_ETHOC is not set
# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=yCONFIG_PCNET32=m
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set CONFIG_8139CP=m
# CONFIG_8139TOO is not set
# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_KS8842 is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not setCONFIG_E1000E=m
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_CNIC is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_ATL1C is not set
# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not setCONFIG_WLAN_80211=y
# CONFIG_PCMCIA_RAYCS is not set
# CONFIG_LIBERTAS is not set
# CONFIG_LIBERTAS_THINFIRM is not set
# CONFIG_AIRO is not set
# CONFIG_ATMEL is not set
# CONFIG_AT76C50X_USB is not set
# CONFIG_AIRO_CS is not set
# CONFIG_PCMCIA_WL3501 is not set
# CONFIG_PRISM54 is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_USB_NET_RNDIS_WLAN is not set
# CONFIG_RTL8180 is not set
# CONFIG_RTL8187 is not set
# CONFIG_ADM8211 is not set
# CONFIG_MAC80211_HWSIM is not set
# CONFIG_MWL8K is not set
# CONFIG_P54_COMMON is not set
# CONFIG_ATH5K is not set
# CONFIG_ATH9K is not set
# CONFIG_AR9170_USB is not set
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not setCONFIG_IWLWIFI=mCONFIG_IWLWIFI_LEDS=yCONFIG_IWLWIFI_SPECTRUM_MEASUREMENT=yCONFIG_IWLWIFI_DEBUG=y
# CONFIG_IWLAGN is not setCONFIG_IWL3945=mCONFIG_IWL3945_SPECTRUM_MEASUREMENT=y
# CONFIG_HOSTAP is not set
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
# CONFIG_ZD1211RW is not set
# CONFIG_RT2X00 is not set
# CONFIG_HERMES is not set
# CONFIG_IWM is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers #
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not setCONFIG_USB_HSO=m
# CONFIG_NET_PCMCIA is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not setCONFIG_NETCONSOLE=m
# CONFIG_NETCONSOLE_DYNAMIC is not setCONFIG_NETPOLL=yCONFIG_NETPOLL_TRAP=yCONFIG_NET_POLL_CONTROLLER=yCONFIG_VIRTIO_NET=m
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
#
# Input device support
#CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not setCONFIG_INPUT_POLLDEV=y
#
# Userland interfaces
#CONFIG_INPUT_MOUSEDEV=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not setCONFIG_INPUT_MOUSEDEV_SCREEN_X=1024CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not setCONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#CONFIG_INPUT_KEYBOARD=yCONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not setCONFIG_INPUT_MOUSE=yCONFIG_MOUSE_PS2=mCONFIG_MOUSE_PS2_ALPS=yCONFIG_MOUSE_PS2_LOGIPS2PP=yCONFIG_MOUSE_PS2_SYNAPTICS=yCONFIG_MOUSE_PS2_LIFEBOOK=yCONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not setCONFIG_MOUSE_SERIAL=m
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not setCONFIG_INPUT_MISC=y
# CONFIG_INPUT_APANEL is not set
# CONFIG_INPUT_ATLAS_BTNS is not set
# CONFIG_INPUT_ATI_REMOTE is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not setCONFIG_INPUT_UINPUT=m
#
# Hardware I/O ports
#CONFIG_SERIO=yCONFIG_SERIO_I8042=yCONFIG_SERIO_SERPORT=m
# CONFIG_SERIO_CT82C710 is not setCONFIG_SERIO_PCIPS2=mCONFIG_SERIO_LIBPS2=yCONFIG_SERIO_RAW=m
# CONFIG_GAMEPORT is not set
#
# Character devices
#CONFIG_VT=yCONFIG_CONSOLE_TRANSLATIONS=yCONFIG_VT_CONSOLE=yCONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not setCONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
#
# Serial drivers
#CONFIG_SERIAL_8250=yCONFIG_SERIAL_8250_CONSOLE=yCONFIG_FIX_EARLYCON_MEM=yCONFIG_SERIAL_8250_PCI=yCONFIG_SERIAL_8250_PNP=y
# CONFIG_SERIAL_8250_CS is not setCONFIG_SERIAL_8250_NR_UARTS=16CONFIG_SERIAL_8250_RUNTIME_UARTS=4CONFIG_SERIAL_8250_EXTENDED=y
# CONFIG_SERIAL_8250_MANY_PORTS is not setCONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not setCONFIG_SERIAL_8250_RSA=y
#
# Non-8250 serial port support
#CONFIG_SERIAL_CORE=yCONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not setCONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
# CONFIG_LEGACY_PTYS is not setCONFIG_HVC_DRIVER=yCONFIG_VIRTIO_CONSOLE=m
# CONFIG_IPMI_HANDLER is not setCONFIG_HW_RANDOM=m
# CONFIG_HW_RANDOM_TIMERIOMEM is not setCONFIG_HW_RANDOM_INTEL=m
# CONFIG_HW_RANDOM_AMD is not set
# CONFIG_HW_RANDOM_VIA is not setCONFIG_HW_RANDOM_VIRTIO=mCONFIG_NVRAM=m
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_CARDMAN_4000 is not set
# CONFIG_CARDMAN_4040 is not set
# CONFIG_IPWIRELESS is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_RAW_DRIVER is not setCONFIG_HPET=yCONFIG_HPET_MMAP=yCONFIG_HANGCHECK_TIMER=m
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not setCONFIG_DEVPORT=yCONFIG_I2C=mCONFIG_I2C_BOARDINFO=yCONFIG_I2C_CHARDEV=mCONFIG_I2C_HELPER_AUTO=yCONFIG_I2C_ALGOBIT=m
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not setCONFIG_I2C_I801=mCONFIG_I2C_ISCH=mCONFIG_I2C_PIIX4=m
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
#
# I2C system bus drivers (mostly embedded / system-on-chip) #
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not setCONFIG_I2C_TINY_USB=m
#
# Graphics adapter I2C/DDC channel drivers
#
# CONFIG_I2C_VOODOO3 is not set
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not setCONFIG_I2C_DEBUG_ALGO=y
# CONFIG_I2C_DEBUG_BUS is not setCONFIG_I2C_DEBUG_CHIP=y
# CONFIG_SPI is not set
#
# PPS support
#
# CONFIG_PPS is not setCONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not setCONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_BATTERY_DS2760 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_BATTERY_MAX17040 is not setCONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_K8TEMP is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATK0110 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_FSCHMD is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_CORETEMP is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not setCONFIG_SENSORS_HDAPS=y
# CONFIG_SENSORS_LIS3LV02D is not set
# CONFIG_SENSORS_APPLESMC is not set
# CONFIG_HWMON_DEBUG_CHIP is not setCONFIG_THERMAL=y
# CONFIG_THERMAL_HWMON is not setCONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#CONFIG_SOFT_WATCHDOG=m
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
# CONFIG_ALIM1535_WDT is not set
# CONFIG_ALIM7101_WDT is not set
# CONFIG_SC520_WDT is not set
# CONFIG_EUROTECH_WDT is not set
# CONFIG_IB700_WDT is not set
# CONFIG_IBMASR is not set
# CONFIG_WAFER_WDT is not set
# CONFIG_I6300ESB_WDT is not setCONFIG_ITCO_WDT=mCONFIG_ITCO_VENDOR_SUPPORT=y
# CONFIG_IT8712F_WDT is not set
# CONFIG_IT87_WDT is not set
# CONFIG_HP_WATCHDOG is not set
# CONFIG_SC1200_WDT is not set
# CONFIG_PC87413_WDT is not set
# CONFIG_60XX_WDT is not set
# CONFIG_SBC8360_WDT is not set
# CONFIG_CPU5_WDT is not set
# CONFIG_SMSC_SCH311X_WDT is not set
# CONFIG_SMSC37B787_WDT is not set
# CONFIG_W83627HF_WDT is not set
# CONFIG_W83697HF_WDT is not set
# CONFIG_W83697UG_WDT is not set
# CONFIG_W83877F_WDT is not set
# CONFIG_W83977F_WDT is not set
# CONFIG_MACHZ_WDT is not set
# CONFIG_SBC_EPX_C3_WATCHDOG is not set
#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set
#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not setCONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_AB3100_CORE is not setCONFIG_REGULATOR=yCONFIG_REGULATOR_DEBUG=y
# CONFIG_REGULATOR_FIXED_VOLTAGE is not setCONFIG_REGULATOR_VIRTUAL_CONSUMER=m
# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
# CONFIG_REGULATOR_BQ24022 is not set
# CONFIG_REGULATOR_MAX1586 is not set
# CONFIG_REGULATOR_LP3971 is not setCONFIG_MEDIA_SUPPORT=m
#
# Multimedia core support
#CONFIG_VIDEO_DEV=mCONFIG_VIDEO_V4L2_COMMON=mCONFIG_VIDEO_ALLOW_V4L1=yCONFIG_VIDEO_V4L1_COMPAT=yCONFIG_DVB_CORE=mCONFIG_VIDEO_MEDIA=m
#
# Multimedia drivers
#CONFIG_MEDIA_ATTACH=yCONFIG_MEDIA_TUNER=mCONFIG_MEDIA_TUNER_CUSTOMISE=yCONFIG_MEDIA_TUNER_SIMPLE=m
# CONFIG_MEDIA_TUNER_TDA8290 is not set
# CONFIG_MEDIA_TUNER_TDA827X is not set
# CONFIG_MEDIA_TUNER_TDA18271 is not setCONFIG_MEDIA_TUNER_TDA9887=m
# CONFIG_MEDIA_TUNER_TEA5761 is not set
# CONFIG_MEDIA_TUNER_TEA5767 is not set
# CONFIG_MEDIA_TUNER_MT20XX is not set
# CONFIG_MEDIA_TUNER_MT2060 is not setCONFIG_MEDIA_TUNER_MT2266=m
# CONFIG_MEDIA_TUNER_MT2131 is not set
# CONFIG_MEDIA_TUNER_QT1010 is not set
# CONFIG_MEDIA_TUNER_XC2028 is not set
# CONFIG_MEDIA_TUNER_XC5000 is not set
# CONFIG_MEDIA_TUNER_MXL5005S is not set
# CONFIG_MEDIA_TUNER_MXL5007T is not set
# CONFIG_MEDIA_TUNER_MC44S803 is not setCONFIG_VIDEO_V4L2=mCONFIG_VIDEO_V4L1=mCONFIG_VIDEOBUF_GEN=mCONFIG_VIDEOBUF_DMA_SG=mCONFIG_VIDEOBUF_VMALLOC=mCONFIG_VIDEO_IR=mCONFIG_VIDEO_TVEEPROM=mCONFIG_VIDEO_TUNER=mCONFIG_VIDEO_CAPTURE_DRIVERS=yCONFIG_VIDEO_ADV_DEBUG=y
# CONFIG_VIDEO_FIXED_MINOR_RANGES is not setCONFIG_VIDEO_HELPER_CHIPS_AUTO=yCONFIG_VIDEO_IR_I2C=mCONFIG_VIDEO_SAA6588=mCONFIG_VIDEO_VIVI=m
# CONFIG_VIDEO_BT848 is not set
# CONFIG_VIDEO_CPIA is not set
# CONFIG_VIDEO_CPIA2 is not set
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_VIDEO_STRADIS is not set
# CONFIG_VIDEO_ZORAN is not setCONFIG_VIDEO_SAA7134=mCONFIG_VIDEO_SAA7134_ALSA=m
# CONFIG_VIDEO_SAA7134_DVB is not set
# CONFIG_VIDEO_MXB is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_CX88 is not set
# CONFIG_VIDEO_CX23885 is not set
# CONFIG_VIDEO_AU0828 is not set
# CONFIG_VIDEO_IVTV is not set
# CONFIG_VIDEO_CX18 is not set
# CONFIG_VIDEO_CAFE_CCIC is not set
# CONFIG_SOC_CAMERA is not setCONFIG_V4L_USB_DRIVERS=y
# CONFIG_USB_VIDEO_CLASS is not setCONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
# CONFIG_USB_GSPCA is not set
# CONFIG_VIDEO_PVRUSB2 is not set
# CONFIG_VIDEO_HDPVR is not set
# CONFIG_VIDEO_EM28XX is not set
# CONFIG_VIDEO_CX231XX is not set
# CONFIG_VIDEO_USBVISION is not set
# CONFIG_USB_VICAM is not set
# CONFIG_USB_IBMCAM is not set
# CONFIG_USB_KONICAWC is not set
# CONFIG_USB_QUICKCAM_MESSENGER is not set
# CONFIG_USB_ET61X251 is not set
# CONFIG_VIDEO_OVCAMCHIP is not set
# CONFIG_USB_OV511 is not set
# CONFIG_USB_SE401 is not set
# CONFIG_USB_SN9C102 is not set
# CONFIG_USB_STV680 is not set
# CONFIG_USB_ZC0301 is not set
# CONFIG_USB_PWC is not set
# CONFIG_USB_PWC_INPUT_EVDEV is not set
# CONFIG_USB_ZR364XX is not set
# CONFIG_USB_STKWEBCAM is not set
# CONFIG_USB_S2255 is not setCONFIG_RADIO_ADAPTERS=y
# CONFIG_RADIO_GEMTEK_PCI is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_MAESTRO is not set
# CONFIG_USB_DSBR is not set
# CONFIG_USB_SI470X is not set
# CONFIG_USB_MR800 is not set
# CONFIG_RADIO_TEA5764 is not setCONFIG_DVB_DYNAMIC_MINORS=yCONFIG_DVB_CAPTURE_DRIVERS=y
#
# Supported SAA7146 based PCI Adapters
#
# CONFIG_TTPCI_EEPROM is not set
# CONFIG_DVB_AV7110 is not set
# CONFIG_DVB_BUDGET_CORE is not set
#
# Supported USB Adapters
#CONFIG_DVB_USB=mCONFIG_DVB_USB_DEBUG=y
# CONFIG_DVB_USB_A800 is not set
# CONFIG_DVB_USB_DIBUSB_MB is not set
# CONFIG_DVB_USB_DIBUSB_MC is not setCONFIG_DVB_USB_DIB0700=m
# CONFIG_DVB_USB_UMT_010 is not set
# CONFIG_DVB_USB_CXUSB is not set
# CONFIG_DVB_USB_M920X is not set
# CONFIG_DVB_USB_GL861 is not set
# CONFIG_DVB_USB_AU6610 is not set
# CONFIG_DVB_USB_DIGITV is not set
# CONFIG_DVB_USB_VP7045 is not set
# CONFIG_DVB_USB_VP702X is not set
# CONFIG_DVB_USB_GP8PSK is not setCONFIG_DVB_USB_NOVA_T_USB2=m
# CONFIG_DVB_USB_TTUSB2 is not set
# CONFIG_DVB_USB_DTT200U is not set
# CONFIG_DVB_USB_OPERA1 is not set
# CONFIG_DVB_USB_AF9005 is not set
# CONFIG_DVB_USB_DW2102 is not set
# CONFIG_DVB_USB_CINERGY_T2 is not set
# CONFIG_DVB_USB_ANYSEE is not set
# CONFIG_DVB_USB_DTV5100 is not setCONFIG_DVB_USB_AF9015=m
# CONFIG_DVB_USB_CE6230 is not set
# CONFIG_DVB_TTUSB_BUDGET is not set
# CONFIG_DVB_TTUSB_DEC is not set
# CONFIG_DVB_SIANO_SMS1XXX is not set
#
# Supported FlexCopII (B2C2) Adapters
#
# CONFIG_DVB_B2C2_FLEXCOP is not set
#
# Supported BT878 Adapters
#
#
# Supported Pluto2 Adapters
#
# CONFIG_DVB_PLUTO2 is not set
#
# Supported SDMC DM1105 Adapters
#
# CONFIG_DVB_DM1105 is not set
#
# Supported DVB Frontends
#CONFIG_DVB_FE_CUSTOMISE=y
#
# Customise DVB Frontends
#
#
# Multistandard (satellite) frontends
#
# CONFIG_DVB_STB0899 is not set
# CONFIG_DVB_STB6100 is not set
# CONFIG_DVB_STV090x is not set
# CONFIG_DVB_STV6110x is not set
#
# DVB-S (satellite) frontends
#
# CONFIG_DVB_CX24110 is not set
# CONFIG_DVB_CX24123 is not set
# CONFIG_DVB_MT312 is not set
# CONFIG_DVB_ZL10036 is not set
# CONFIG_DVB_S5H1420 is not set
# CONFIG_DVB_STV0288 is not set
# CONFIG_DVB_STB6000 is not set
# CONFIG_DVB_STV0299 is not set
# CONFIG_DVB_STV6110 is not set
# CONFIG_DVB_STV0900 is not set
# CONFIG_DVB_TDA8083 is not set
# CONFIG_DVB_TDA10086 is not setCONFIG_DVB_TDA8261=m
# CONFIG_DVB_VES1X93 is not set
# CONFIG_DVB_TUNER_ITD1000 is not set
# CONFIG_DVB_TUNER_CX24113 is not set
# CONFIG_DVB_TDA826X is not set
# CONFIG_DVB_TUA6100 is not set
# CONFIG_DVB_CX24116 is not setCONFIG_DVB_SI21XX=m
#
# DVB-T (terrestrial) frontends
#
# CONFIG_DVB_SP8870 is not set
# CONFIG_DVB_SP887X is not set
# CONFIG_DVB_CX22700 is not set
# CONFIG_DVB_CX22702 is not set
# CONFIG_DVB_DRX397XD is not set
# CONFIG_DVB_L64781 is not set
# CONFIG_DVB_TDA1004X is not set
# CONFIG_DVB_NXT6000 is not set
# CONFIG_DVB_MT352 is not set
# CONFIG_DVB_ZL10353 is not set
# CONFIG_DVB_DIB3000MB is not setCONFIG_DVB_DIB3000MC=mCONFIG_DVB_DIB7000M=mCONFIG_DVB_DIB7000P=m
# CONFIG_DVB_TDA10048 is not setCONFIG_DVB_AF9013=m
#
# DVB-C (cable) frontends
#
# CONFIG_DVB_VES1820 is not set
# CONFIG_DVB_TDA10021 is not set
# CONFIG_DVB_TDA10023 is not set
# CONFIG_DVB_STV0297 is not set
#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends #
# CONFIG_DVB_NXT200X is not set
# CONFIG_DVB_OR51211 is not set
# CONFIG_DVB_OR51132 is not set
# CONFIG_DVB_BCM3510 is not set
# CONFIG_DVB_LGDT330X is not set
# CONFIG_DVB_LGDT3304 is not set
# CONFIG_DVB_LGDT3305 is not set
# CONFIG_DVB_S5H1409 is not set
# CONFIG_DVB_AU8522 is not set
# CONFIG_DVB_S5H1411 is not set
#
# ISDB-T (terrestrial) frontends
#
# CONFIG_DVB_S921 is not set
#
# Digital terrestrial only tuners/PLL
#CONFIG_DVB_PLL=mCONFIG_DVB_TUNER_DIB0070=m
#
# SEC control devices for DVB-S
#
# CONFIG_DVB_LNBP21 is not set
# CONFIG_DVB_ISL6405 is not set
# CONFIG_DVB_ISL6421 is not set
# CONFIG_DVB_ISL6423 is not set
# CONFIG_DVB_LGS8GL5 is not set
# CONFIG_DVB_LGS8GXX is not set
#
# Tools to develop new frontends
#CONFIG_DVB_DUMMY_FE=m
# CONFIG_DAB is not set
#
# Graphics support
#CONFIG_AGP=yCONFIG_AGP_AMD64=yCONFIG_AGP_INTEL=m
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_VIA is not setCONFIG_DRM=m
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_I810 is not set
# CONFIG_DRM_I830 is not setCONFIG_DRM_I915=m
# CONFIG_DRM_I915_KMS is not setCONFIG_DRM_MGA=m
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_VGASTATE is not setCONFIG_VIDEO_OUTPUT_CONTROL=mCONFIG_FB=yCONFIG_FIRMWARE_EDID=yCONFIG_FB_DDC=mCONFIG_FB_BOOT_VESA_SUPPORT=yCONFIG_FB_CFB_FILLRECT=yCONFIG_FB_CFB_COPYAREA=yCONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not setCONFIG_FB_MODE_HELPERS=yCONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_UVESA is not setCONFIG_FB_VESA=yCONFIG_FB_EFI=y
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_LE80578 is not setCONFIG_FB_INTEL=m
# CONFIG_FB_INTEL_DEBUG is not setCONFIG_FB_INTEL_I2C=y
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not setCONFIG_BACKLIGHT_LCD_SUPPORT=yCONFIG_LCD_CLASS_DEVICE=m
# CONFIG_LCD_ILI9320 is not setCONFIG_LCD_PLATFORM=mCONFIG_BACKLIGHT_CLASS_DEVICE=mCONFIG_BACKLIGHT_GENERIC=m
# CONFIG_BACKLIGHT_PROGEAR is not set
# CONFIG_BACKLIGHT_MBP_NVIDIA is not set
# CONFIG_BACKLIGHT_SAHARA is not set
#
# Display device support
#CONFIG_DISPLAY_SUPPORT=m
#
# Display hardware drivers
#
#
# Console display driver support
#CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set # CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=yCONFIG_LOGO=yCONFIG_LOGO_LINUX_MONO=y CONFIG_LOGO_LINUX_VGA16=y CONFIG_LOGO_LINUX_CLUT224=yCONFIG_SOUND=mCONFIG_SOUND_OSS_CORE=yCONFIG_SND=mCONFIG_SND_TIMER=mCONFIG_SND_PCM=mCONFIG_SND_HWDEP=mCONFIG_SND_RAWMIDI=mCONFIG_SND_JACK=yCONFIG_SND_SEQUENCER=m
# CONFIG_SND_SEQ_DUMMY is not set CONFIG_SND_OSSEMUL=yCONFIG_SND_MIXER_OSS=mCONFIG_SND_PCM_OSS=m CONFIG_SND_PCM_OSS_PLUGINS=y CONFIG_SND_SEQUENCER_OSS=y CONFIG_SND_HRTIMER=m CONFIG_SND_SEQ_HRTIMER_DEFAULT=y CONFIG_SND_DYNAMIC_MINORS=y
# CONFIG_SND_SUPPORT_OLD_API is not set CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set CONFIG_SND_VMASTER=yCONFIG_SND_RAWMIDI_SEQ=m
# CONFIG_SND_OPL3_LIB_SEQ is not set
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set CONFIG_SND_EMU10K1_SEQ=m CONFIG_SND_MPU401_UART=m CONFIG_SND_AC97_CODEC=mCONFIG_SND_DRIVERS=yCONFIG_SND_DUMMY=m
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set CONFIG_SND_SERIAL_U16550=m CONFIG_SND_MPU401=m CONFIG_SND_AC97_POWER_SAVE=y CONFIG_SND_AC97_POWER_SAVE_DEFAULT=500 CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_CTXFI is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_INDIGOIOX is not set
# CONFIG_SND_INDIGODJX is not set CONFIG_SND_EMU10K1=m
# CONFIG_SND_EMU10K1X is not set CONFIG_SND_ENS1370=mCONFIG_SND_ENS1371=m
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set CONFIG_SND_HDA_INTEL=m
# CONFIG_SND_HDA_HWDEP is not set
# CONFIG_SND_HDA_INPUT_BEEP is not set CONFIG_SND_HDA_INPUT_JACK=y CONFIG_SND_HDA_CODEC_REALTEK=y CONFIG_SND_HDA_CODEC_ANALOG=y CONFIG_SND_HDA_CODEC_SIGMATEL=y CONFIG_SND_HDA_CODEC_VIA=y CONFIG_SND_HDA_CODEC_ATIHDMI=y
# CONFIG_SND_HDA_CODEC_NVHDMI is not set CONFIG_SND_HDA_CODEC_INTELHDMI=y CONFIG_SND_HDA_ELD=y CONFIG_SND_HDA_CODEC_CONEXANT=y
# CONFIG_SND_HDA_CODEC_CA0110 is not set CONFIG_SND_HDA_CODEC_CMEDIA=y CONFIG_SND_HDA_CODEC_SI3054=y CONFIG_SND_HDA_GENERIC=y CONFIG_SND_HDA_POWER_SAVE=y CONFIG_SND_HDA_POWER_SAVE_DEFAULT=500
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_HIFIER is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set CONFIG_SND_INTEL8X0=m
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_LX6464ES is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_USB is not set
# CONFIG_SND_PCMCIA is not set
# CONFIG_SND_SOC is not set
# CONFIG_SOUND_PRIME is not set CONFIG_AC97_BUS=mCONFIG_HID_SUPPORT=yCONFIG_HID=m
# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set
#
# USB Input Devices
#CONFIG_USB_HID=m
# CONFIG_HID_PID is not setCONFIG_USB_HIDDEV=y
#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
#
# Special HID drivers
#
# CONFIG_HID_A4TECH is not set
# CONFIG_HID_APPLE is not set
# CONFIG_HID_BELKIN is not set
# CONFIG_HID_CHERRY is not set
# CONFIG_HID_CHICONY is not set
# CONFIG_HID_CYPRESS is not set
# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EZKEY is not set
# CONFIG_HID_KYE is not set
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_KENSINGTON is not set
# CONFIG_HID_LOGITECH is not set
# CONFIG_HID_MICROSOFT is not set
# CONFIG_HID_MONTEREY is not set
# CONFIG_HID_NTRIG is not set
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_SAMSUNG is not set
# CONFIG_HID_SONY is not set
# CONFIG_HID_SUNPLUS is not set
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TOPSEED is not set
# CONFIG_HID_THRUSTMASTER is not set
# CONFIG_HID_WACOM is not set
# CONFIG_HID_ZEROPLUS is not setCONFIG_USB_SUPPORT=yCONFIG_USB_ARCH_HAS_HCD=yCONFIG_USB_ARCH_HAS_OHCI=yCONFIG_USB_ARCH_HAS_EHCI=yCONFIG_USB=m
# CONFIG_USB_DEBUG is not setCONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#CONFIG_USB_DEVICEFS=yCONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not setCONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not setCONFIG_USB_MON=m
# CONFIG_USB_WUSB is not set
# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_XHCI_HCD is not setCONFIG_USB_EHCI_HCD=mCONFIG_USB_EHCI_ROOT_HUB_TT=yCONFIG_USB_EHCI_TT_NEWSCHED=y
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not setCONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not setCONFIG_USB_OHCI_LITTLE_ENDIAN=yCONFIG_USB_UHCI_HCD=m
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_WHCI_HCD is not set
# CONFIG_USB_HWA_HCD is not set
#
# Enable Host or Gadget support to see Inventra options #
#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not setCONFIG_USB_PRINTER=m
# CONFIG_USB_WDM is not setCONFIG_USB_TMC=m
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may #
#
# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
# USB port drivers
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not setCONFIG_USB_TEST=m
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
#
# OTG and related infrastructure
#
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not setCONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
#
# MMC/SD/SDIO Card Drivers
#CONFIG_MMC_BLOCK=mCONFIG_MMC_BLOCK_BOUNCE=y
# CONFIG_SDIO_UART is not set
# CONFIG_MMC_TEST is not set
#
# MMC/SD/SDIO Host Controller Drivers
#CONFIG_MMC_SDHCI=mCONFIG_MMC_SDHCI_PCI=m
# CONFIG_MMC_RICOH_MMC is not setCONFIG_MMC_SDHCI_PLTFM=m
# CONFIG_MMC_WBSD is not set
# CONFIG_MMC_TIFM_SD is not setCONFIG_MMC_SDRICOH_CS=m
# CONFIG_MMC_CB710 is not set
# CONFIG_MMC_VIA_SDMMC is not set
# CONFIG_MEMSTICK is not setCONFIG_NEW_LEDS=yCONFIG_LEDS_CLASS=m
#
# LED drivers
#
# CONFIG_LEDS_ALIX2 is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_LP3944 is not set
# CONFIG_LEDS_CLEVO_MAIL is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_BD2802 is not set
#
# LED Triggers
#CONFIG_LEDS_TRIGGERS=yCONFIG_LEDS_TRIGGER_TIMER=mCONFIG_LEDS_TRIGGER_HEARTBEAT=m
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
#
# iptables trigger is under Netfilter config (LED target) # # CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set CONFIG_RTC_LIB=m CONFIG_RTC_CLASS=m
#
# RTC interfaces
#CONFIG_RTC_INTF_SYSFS=yCONFIG_RTC_INTF_PROC=yCONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set
#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set
#
# SPI RTC drivers
#
#
# Platform RTC drivers
#CONFIG_RTC_DRV_CMOS=m
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#CONFIG_DMADEVICES=y
#
# DMA Devices
#CONFIG_INTEL_IOATDMA=mCONFIG_DMA_ENGINE=y
#
# DMA Clients
#CONFIG_NET_DMA=y
# CONFIG_ASYNC_TX_DMA is not set
# CONFIG_DMATEST is not setCONFIG_DCA=m
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
#
# TI VLYNQ
#
# CONFIG_STAGING is not setCONFIG_X86_PLATFORM_DEVICES=y
# CONFIG_ACER_WMI is not set
# CONFIG_ASUS_LAPTOP is not set
# CONFIG_FUJITSU_LAPTOP is not set
# CONFIG_MSI_LAPTOP is not set
# CONFIG_PANASONIC_LAPTOP is not set
# CONFIG_COMPAL_LAPTOP is not set
# CONFIG_SONY_LAPTOP is not setCONFIG_THINKPAD_ACPI=m
# CONFIG_THINKPAD_ACPI_DEBUGFACILITIES is not setCONFIG_THINKPAD_ACPI_DEBUG=y
# CONFIG_THINKPAD_ACPI_UNSAFE_LEDS is not setCONFIG_THINKPAD_ACPI_VIDEO=y
# CONFIG_THINKPAD_ACPI_HOTKEY_POLL is not set
# CONFIG_INTEL_MENLOW is not set
# CONFIG_EEEPC_LAPTOP is not set
# CONFIG_ACPI_WMI is not set
# CONFIG_ACPI_ASUS is not setCONFIG_ACPI_TOSHIBA=m
#
# Firmware Drivers
#CONFIG_EDD=m
# CONFIG_EDD_OFF is not setCONFIG_FIRMWARE_MEMMAP=yCONFIG_EFI_VARS=m
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not setCONFIG_DMIID=y
# CONFIG_ISCSI_IBFT_FIND is not set
#
# File systems
#CONFIG_EXT2_FS=yCONFIG_EXT2_FS_XATTR=yCONFIG_EXT2_FS_POSIX_ACL=yCONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not setCONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not setCONFIG_EXT3_FS_XATTR=yCONFIG_EXT3_FS_POSIX_ACL=yCONFIG_EXT3_FS_SECURITY=yCONFIG_EXT4_FS=m
# CONFIG_EXT4DEV_COMPAT is not setCONFIG_EXT4_FS_XATTR=yCONFIG_EXT4_FS_POSIX_ACL=yCONFIG_EXT4_FS_SECURITY=yCONFIG_JBD=y
# CONFIG_JBD_DEBUG is not setCONFIG_JBD2=m
# CONFIG_JBD2_DEBUG is not setCONFIG_FS_MBCACHE=yCONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not setCONFIG_REISERFS_PROC_INFO=yCONFIG_REISERFS_FS_XATTR=yCONFIG_REISERFS_FS_POSIX_ACL=yCONFIG_REISERFS_FS_SECURITY=y
# CONFIG_JFS_FS is not setCONFIG_FS_POSIX_ACL=yCONFIG_XFS_FS=mCONFIG_XFS_QUOTA=yCONFIG_XFS_POSIX_ACL=yCONFIG_XFS_RT=y
# CONFIG_XFS_DEBUG is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not setCONFIG_BTRFS_FS=m
# CONFIG_BTRFS_FS_POSIX_ACL is not setCONFIG_FILE_LOCKING=yCONFIG_FSNOTIFY=yCONFIG_DNOTIFY=yCONFIG_INOTIFY=yCONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not setCONFIG_QUOTACTL=yCONFIG_AUTOFS_FS=mCONFIG_AUTOFS4_FS=mCONFIG_FUSE_FS=mCONFIG_CUSE=mCONFIG_GENERIC_ACL=y
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#CONFIG_ISO9660_FS=mCONFIG_JOLIET=yCONFIG_ZISOFS=yCONFIG_UDF_FS=mCONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#CONFIG_FAT_FS=m
# CONFIG_MSDOS_FS is not setCONFIG_VFAT_FS=mCONFIG_FAT_DEFAULT_CODEPAGE=437CONFIG_FAT_DEFAULT_IOCHARSET="utf8"CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not setCONFIG_NTFS_RW=y
#
# Pseudo filesystems
#CONFIG_PROC_FS=yCONFIG_PROC_KCORE=yCONFIG_PROC_SYSCTL=yCONFIG_PROC_PAGE_MONITOR=yCONFIG_SYSFS=yCONFIG_TMPFS=yCONFIG_TMPFS_POSIX_ACL=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not setCONFIG_CONFIGFS_FS=mCONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not setCONFIG_JFFS2_FS=mCONFIG_JFFS2_FS_DEBUG=0CONFIG_JFFS2_FS_WRITEBUFFER=y
# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
# CONFIG_JFFS2_SUMMARY is not set
# CONFIG_JFFS2_FS_XATTR is not setCONFIG_JFFS2_COMPRESSION_OPTIONS=yCONFIG_JFFS2_ZLIB=yCONFIG_JFFS2_LZO=yCONFIG_JFFS2_RTIME=yCONFIG_JFFS2_RUBIN=y
# CONFIG_JFFS2_CMODE_NONE is not setCONFIG_JFFS2_CMODE_PRIORITY=y
# CONFIG_JFFS2_CMODE_SIZE is not set
# CONFIG_JFFS2_CMODE_FAVOURLZO is not setCONFIG_CRAMFS=mCONFIG_SQUASHFS=m
# CONFIG_SQUASHFS_EMBEDDED is not setCONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_NILFS2_FS is not setCONFIG_NETWORK_FILESYSTEMS=yCONFIG_NFS_FS=mCONFIG_NFS_V3=yCONFIG_NFS_V3_ACL=yCONFIG_NFS_V4=y
# CONFIG_NFS_V4_1 is not setCONFIG_NFSD=mCONFIG_NFSD_V2_ACL=yCONFIG_NFSD_V3=yCONFIG_NFSD_V3_ACL=yCONFIG_NFSD_V4=yCONFIG_LOCKD=mCONFIG_LOCKD_V4=yCONFIG_EXPORTFS=mCONFIG_NFS_ACL_SUPPORT=mCONFIG_NFS_COMMON=yCONFIG_SUNRPC=mCONFIG_SUNRPC_GSS=mCONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_RPCSEC_GSS_SPKM3 is not setCONFIG_SMB_FS=mCONFIG_SMB_NLS_DEFAULT=yCONFIG_SMB_NLS_REMOTE="cp437"CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_WEAK_PW_HASH is not setCONFIG_CIFS_XATTR=yCONFIG_CIFS_POSIX=y
# CONFIG_CIFS_DEBUG2 is not setCONFIG_CIFS_EXPERIMENTAL=y
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not setCONFIG_AMIGA_PARTITION=y
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not setCONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not setCONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not setCONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not setCONFIG_NLS=yCONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not setCONFIG_NLS_CODEPAGE_852=m
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not setCONFIG_NLS_CODEPAGE_1250=m
# CONFIG_NLS_CODEPAGE_1251 is not setCONFIG_NLS_ASCII=yCONFIG_NLS_ISO8859_1=mCONFIG_NLS_ISO8859_2=m
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not setCONFIG_NLS_UTF8=m
# CONFIG_DLM is not set
#
# Kernel hacking
#CONFIG_TRACE_IRQFLAGS_SUPPORT=yCONFIG_PRINTK_TIME=yCONFIG_ENABLE_WARN_DEPRECATED=yCONFIG_ENABLE_MUST_CHECK=yCONFIG_FRAME_WARN=2048CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not setCONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not setCONFIG_DEBUG_KERNEL=yCONFIG_DEBUG_SHIRQ=yCONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not setCONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0CONFIG_DETECT_HUNG_TASK=y
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not setCONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0CONFIG_SCHED_DEBUG=yCONFIG_SCHEDSTATS=yCONFIG_TIMER_STATS=yCONFIG_DEBUG_OBJECTS=y
# CONFIG_DEBUG_OBJECTS_SELFTEST is not setCONFIG_DEBUG_OBJECTS_FREE=yCONFIG_DEBUG_OBJECTS_TIMERS=yCONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1CONFIG_SLUB_DEBUG_ON=y
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_KMEMLEAK is not setCONFIG_DEBUG_RT_MUTEXES=yCONFIG_DEBUG_PI_LIST=y
# CONFIG_RT_MUTEX_TESTER is not setCONFIG_DEBUG_SPINLOCK=yCONFIG_DEBUG_MUTEXES=yCONFIG_DEBUG_LOCK_ALLOC=yCONFIG_PROVE_LOCKING=yCONFIG_LOCKDEP=yCONFIG_LOCK_STAT=y
# CONFIG_DEBUG_LOCKDEP is not setCONFIG_TRACE_IRQFLAGS=yCONFIG_DEBUG_SPINLOCK_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not setCONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not setCONFIG_DEBUG_BUGVERBOSE=yCONFIG_DEBUG_INFO=yCONFIG_DEBUG_VM=y
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_MEMORY_INIT is not setCONFIG_DEBUG_LIST=yCONFIG_DEBUG_SG=yCONFIG_DEBUG_NOTIFIERS=yCONFIG_ARCH_WANT_FRAME_POINTERS=yCONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not setCONFIG_RCU_CPU_STALL_DETECTOR=y
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not setCONFIG_LATENCYTOP=y
# CONFIG_SYSCTL_SYSCALL_CHECK is not setCONFIG_DEBUG_PAGEALLOC=yCONFIG_USER_STACKTRACE_SUPPORT=yCONFIG_NOP_TRACER=yCONFIG_HAVE_FTRACE_NMI_ENTER=yCONFIG_HAVE_FUNCTION_TRACER=yCONFIG_HAVE_FUNCTION_GRAPH_TRACER=yCONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=yCONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=yCONFIG_HAVE_DYNAMIC_FTRACE=yCONFIG_HAVE_FTRACE_MCOUNT_RECORD=yCONFIG_HAVE_FTRACE_SYSCALLS=yCONFIG_TRACER_MAX_TRACE=yCONFIG_RING_BUFFER=yCONFIG_FTRACE_NMI_ENTER=yCONFIG_EVENT_TRACING=yCONFIG_CONTEXT_SWITCH_TRACER=yCONFIG_TRACING=yCONFIG_GENERIC_TRACER=yCONFIG_TRACING_SUPPORT=yCONFIG_FTRACE=yCONFIG_FUNCTION_TRACER=yCONFIG_FUNCTION_GRAPH_TRACER=yCONFIG_IRQSOFF_TRACER=yCONFIG_SYSPROF_TRACER=yCONFIG_SCHED_TRACER=y
# CONFIG_FTRACE_SYSCALLS is not setCONFIG_BOOT_TRACER=yCONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not setCONFIG_POWER_TRACER=yCONFIG_STACK_TRACER=yCONFIG_KMEMTRACE=yCONFIG_WORKQUEUE_TRACER=y
# CONFIG_BLK_DEV_IO_TRACE is not setCONFIG_DYNAMIC_FTRACE=y
# CONFIG_FUNCTION_PROFILER is not setCONFIG_FTRACE_MCOUNT_RECORD=y
# CONFIG_FTRACE_STARTUP_TEST is not setCONFIG_MMIOTRACE=yCONFIG_MMIOTRACE_TEST=m
# CONFIG_RING_BUFFER_BENCHMARK is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_DYNAMIC_DEBUG is not setCONFIG_DMA_API_DEBUG=y
# CONFIG_SAMPLES is not setCONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not setCONFIG_HAVE_ARCH_KMEMCHECK=y
# CONFIG_STRICT_DEVMEM is not setCONFIG_X86_VERBOSE_BOOTUP=y
# CONFIG_EARLY_PRINTK is not setCONFIG_DEBUG_STACKOVERFLOW=yCONFIG_DEBUG_STACK_USAGE=y
# CONFIG_DEBUG_PER_CPU_MAPS is not setCONFIG_X86_PTDUMP=yCONFIG_DEBUG_RODATA=y
# CONFIG_DEBUG_RODATA_TEST is not set
# CONFIG_DEBUG_NX_TEST is not set
# CONFIG_IOMMU_DEBUG is not set
# CONFIG_IOMMU_STRESS is not setCONFIG_HAVE_MMIOTRACE_SUPPORT=yCONFIG_IO_DELAY_TYPE_0X80=0CONFIG_IO_DELAY_TYPE_0XED=1CONFIG_IO_DELAY_TYPE_UDELAY=2CONFIG_IO_DELAY_TYPE_NONE=3CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not setCONFIG_DEFAULT_IO_DELAY_TYPE=0CONFIG_DEBUG_BOOT_PARAMS=y
# CONFIG_CPA_DEBUG is not setCONFIG_OPTIMIZE_INLINING=y
#
# Security options
#
# CONFIG_KEYS is not setCONFIG_SECURITY=y
# CONFIG_SECURITYFS is not set CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_NETWORK_XFRM is not set
# CONFIG_SECURITY_PATH is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_SECURITY_SELINUX=y CONFIG_SECURITY_SELINUX_BOOTPARAM=y CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1 CONFIG_SECURITY_SELINUX_DISABLE=y CONFIG_SECURITY_SELINUX_DEVELOP=y CONFIG_SECURITY_SELINUX_AVC_STATS=y CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set # CONFIG_SECURITY_TOMOYO is not set
# CONFIG_IMA is not setCONFIG_XOR_BLOCKS=mCONFIG_ASYNC_CORE=mCONFIG_ASYNC_MEMCPY=mCONFIG_ASYNC_XOR=mCONFIG_CRYPTO=y
#
# Crypto core or helper
#
# CONFIG_CRYPTO_FIPS is not setCONFIG_CRYPTO_ALGAPI=mCONFIG_CRYPTO_ALGAPI2=mCONFIG_CRYPTO_AEAD2=mCONFIG_CRYPTO_BLKCIPHER=mCONFIG_CRYPTO_BLKCIPHER2=mCONFIG_CRYPTO_HASH=mCONFIG_CRYPTO_HASH2=mCONFIG_CRYPTO_RNG2=mCONFIG_CRYPTO_PCOMP=mCONFIG_CRYPTO_MANAGER=mCONFIG_CRYPTO_MANAGER2=m
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not setCONFIG_CRYPTO_WORKQUEUE=m
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_SEQIV is not set
#
# Block modes
#CONFIG_CRYPTO_CBC=m
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not setCONFIG_CRYPTO_ECB=m
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set
#
# Hash modes
#CONFIG_CRYPTO_HMAC=m
# CONFIG_CRYPTO_XCBC is not set
#
# Digest
#CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_CRC32C_INTEL is not set
# CONFIG_CRYPTO_MD4 is not setCONFIG_CRYPTO_MD5=mCONFIG_CRYPTO_MICHAEL_MIC=m
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not setCONFIG_CRYPTO_SHA1=mCONFIG_CRYPTO_SHA256=m
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set
#
# Ciphers
#CONFIG_CRYPTO_AES=m
# CONFIG_CRYPTO_AES_X86_64 is not set
# CONFIG_CRYPTO_AES_NI_INTEL is not set
# CONFIG_CRYPTO_ANUBIS is not setCONFIG_CRYPTO_ARC4=m
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not setCONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SALSA20_X86_64 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_TWOFISH_X86_64 is not set
#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not setCONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_PADLOCK is not set
# CONFIG_CRYPTO_DEV_HIFN_795X is not setCONFIG_HAVE_KVM=yCONFIG_HAVE_KVM_IRQCHIP=yCONFIG_VIRTUALIZATION=yCONFIG_KVM=mCONFIG_KVM_INTEL=mCONFIG_KVM_AMD=mCONFIG_KVM_TRACE=yCONFIG_VIRTIO=mCONFIG_VIRTIO_RING=mCONFIG_VIRTIO_PCI=mCONFIG_VIRTIO_BALLOON=mCONFIG_BINARY_PRINTF=y
#
# Library routines
#CONFIG_BITREVERSE=yCONFIG_GENERIC_FIND_FIRST_BIT=yCONFIG_GENERIC_FIND_NEXT_BIT=yCONFIG_GENERIC_FIND_LAST_BIT=yCONFIG_CRC_CCITT=mCONFIG_CRC16=mCONFIG_CRC_T10DIF=yCONFIG_CRC_ITU_T=mCONFIG_CRC32=y
# CONFIG_CRC7 is not setCONFIG_LIBCRC32C=mCONFIG_ZLIB_INFLATE=yCONFIG_ZLIB_DEFLATE=mCONFIG_LZO_COMPRESS=mCONFIG_LZO_DECOMPRESS=mCONFIG_DECOMPRESS_GZIP=yCONFIG_DECOMPRESS_BZIP2=yCONFIG_HAS_IOMEM=yCONFIG_HAS_IOPORT=yCONFIG_HAS_DMA=yCONFIG_NLATTR=y
Looks like slab data corruption on early boot that cannot be reported since the system has not fully bootstrapped yet. Instead of a report you get a general protection fault. The primary issue is slab data corruption though.
Quoted 3,177 lines
Recently I'm getting complete system freeze during reboot - usually just after iptables frees modules the oops strikes in - oops is taken via serial console on the second machine - as this machine is completely dead in this moment.
I'm using a lot of memory debug options - so this might be the result?
- looks like some memory gets mangled??. For some time I've
suspected kmemleak - thus I've been not reporting it when it happened for the first time (few weeks already) - but this kernel is compiled without kmemleak and still crashes.Also the crash will not happen with booting to single mode - the full startup (without Xorg) must happen to get this crash on reboot.
My machine is T61, 4GB, C2D,
x86_64
Kernel vanilla git commit:85dfd81dc57e8183a277ddd7a56aa65c96f3f487with two very small unrelated patches on top of this. .config attached.general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC last sysfs file: /sys/module/nf_conntrack/refcnt CPU 1 Modules linked in: sit tunnel4 bridge stp llc rfcomm sco l2cap sunrpcautofs4 ipv6
binfmt_miscloopdm_mirrordm_region_hashdm_logdm_modkvm_intelkvm i915 drmi2c_algo_bituinput arc4 ecb cryptomgr aead pcompresscrypto_blkciphercrypto_hashcrypto_algapisnd_hda_codec_analogiwl3945snd_hda_intelsnd_hda_codecsnd_seq_osssnd_seq_midi_eventiwlcoresnd_seqsnd_seq_devicesnd_pcm_osssnd_mixer_ossbtusbsnd_pcmbluetooth mac80211snd_timerrtc_cmoscfg80211 sndthinkpad_acpirfkillrtc_coresdhci_pcisdhci psmouse video soundcorertc_libbacklightsnd_page_allocusbhid hidmmc_coresr_modserio_rawevdev output nvramiTCO_wdtiTCO_vendor_supportbutton cdromled_classi2c_i801e1000e battery acintel_agpi2c_coreuhci_hcdohci_hcdehci_hcdusbcore [last unloaded:nf_conntrack]
Pid: 0, comm: swapper Not tainted 2.6.31-rc5-00472-g3d32107 #4 6464CTORIP: 0010:[<ffffffff811d9c69>] [<ffffffff811d9c69>] strnlen+0x9/0x40 RSP: 0018:ffff88002efdfa20 EFLAGS: 00010086 RAX: ffffffff8149a952 RBX: ffffffff81817cc0 RCX: 0000000000000002 RDX: 6b6b6b6b6b6b6b6b RSI: ffffffffffffffff RDI: 6b6b6b6b6b6b6b6b RBP: ffff88002efdfa20 R08: 0000000000000073 R09: 0000000000000000 R10: 0000000000000000 R11: ffffffff8104cfd8 R12: ffffffff818178c7 R13: 6b6b6b6b6b6b6b6b R14: 00000000ffffffff R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88002efdc000(0000) knlGS:0000000000000000 CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b CR2: 000000000240d190 CR3: 0000000001001000 CR4: 00000000000026e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process swapper (pid: 0, threadinfo ffff88013b95a000, task ffff88013b9346c0) Stack: ffff88002efdfa60 ffffffff811db9c0 0000000000000033 ffffffff818178c7 <0> ffffffff8148af64 ffffffff8148af62 ffff88002efdfbd0 ffffffff81817cc0 <0> ffff88002efdfb00 ffffffff811dc800 0000000000000004 0000000affffffff Call Trace: <IRQ> [<ffffffff811db9c0>] string+0x40/0x100 [<ffffffff811dc800>] vsnprintf+0x310/0x5d0 [<ffffffff811dcbd1>] vscnprintf+0x11/0x30 [<ffffffff8104d006>] vprintk+0x86/0x460 [<ffffffff811dc800>] ? vsnprintf+0x310/0x5d0 [<ffffffff8137d700>] printk+0x41/0x49 [<ffffffff810f9d7e>] slab_bug+0x7e/0xa0 [<ffffffff81380bb7>] ? _spin_unlock_irqrestore+0x57/0x70 [<ffffffff810f9e91>] slab_err+0x71/0xb0 [<ffffffff81380b50>] ? _spin_unlock_irq+0x30/0x40 [<ffffffff810fa2b9>] slab_pad_check+0x129/0x160 [<ffffffff810fc0be>] __free_slab+0xde/0x170 [<ffffffff810a3230>] ? __rcu_process_callbacks+0xa0/0x350 [<ffffffff810fc1a6>] rcu_free_slab+0x16/0x20 [<ffffffff810a3327>] __rcu_process_callbacks+0x197/0x350 [<ffffffff810a350b>] rcu_process_callbacks+0x2b/0x50 [<ffffffff81052e7c>] __do_softirq+0xbc/0x200 [<ffffffff8100d2dc>] call_softirq+0x1c/0x50 [<ffffffff8100eb65>] do_softirq+0x75/0xb0 [<ffffffff81052935>] irq_exit+0x95/0xa0 [<ffffffff81385f15>] do_IRQ+0x75/0xf0 [<ffffffff8100cad3>] ret_from_intr+0x0/0xf <EOI> [<ffffffff8123e60b>] ? acpi_idle_enter_bm+0x24d/0x27f [<ffffffff8123e608>] ? acpi_idle_enter_bm+0x24a/0x27f [<ffffffff812dd283>] ? cpuidle_idle_call+0xa3/0x100 [<ffffffff8100ae80>] ? cpu_idle+0x70/0xc0 [<ffffffff81379eea>] ? start_secondary+0x189/0x18e Code: c9 c3 55 31 c0 48 89 e5 48 89 fa 80 3f 00 74 10 66 90 48 ff c280 3a 00 75 f8 48 89 d0 48 29 f8 c9 c3 55 48 85 f6 48 89 e5 74 2c <80> 3f 00 74 27 48 ff ce 48 89 f8 eb 12 66 2e 0f 1f 84 00 00 00 RIP [<
ffffffff811d9c69>]strnlen+0x9/0x40
RSP <ffff88002efdfa20>---[ end trace a1644c95984b956d ]--- Kernel panic - not syncing: Fatal exception in interrupt Pid: 0, comm: swapper Tainted: G D 2.6.31-rc5-00472-g3d32107 #4 Call Trace: <IRQ> [<ffffffff8137d609>] panic+0x78/0x12e [<ffffffff81380bb7>] ? _spin_unlock_irqrestore+0x57/0x70 [<ffffffff8138242a>] oops_end+0xda/0xe0 [<ffffffff8101013b>] die+0x5b/0x90 [<ffffffff81382242>] do_general_protection+0x152/0x160 [<ffffffff8138163f>] general_protection+0x1f/0x30 [<ffffffff8104cfd8>] ? vprintk+0x58/0x460 [<ffffffff811d9c69>] ? strnlen+0x9/0x40 [<ffffffff811db9c0>] string+0x40/0x100 [<ffffffff811dc800>] vsnprintf+0x310/0x5d0 [<ffffffff811dcbd1>] vscnprintf+0x11/0x30 [<ffffffff8104d006>] vprintk+0x86/0x460 [<ffffffff811dc800>] ? vsnprintf+0x310/0x5d0 [<ffffffff8137d700>] printk+0x41/0x49 [<ffffffff810f9d7e>] slab_bug+0x7e/0xa0 [<ffffffff81380bb7>] ? _spin_unlock_irqrestore+0x57/0x70 [<ffffffff810f9e91>] slab_err+0x71/0xb0 [<ffffffff81380b50>] ? _spin_unlock_irq+0x30/0x40 [<ffffffff810fa2b9>] slab_pad_check+0x129/0x160 [<ffffffff810fc0be>] __free_slab+0xde/0x170 [<ffffffff810a3230>] ? __rcu_process_callbacks+0xa0/0x350 [<ffffffff810fc1a6>] rcu_free_slab+0x16/0x20 [<ffffffff810a3327>] __rcu_process_callbacks+0x197/0x350 [<ffffffff810a350b>] rcu_process_callbacks+0x2b/0x50 [<ffffffff81052e7c>] __do_softirq+0xbc/0x200 [<ffffffff8100d2dc>] call_softirq+0x1c/0x50 [<ffffffff8100eb65>] do_softirq+0x75/0xb0 [<ffffffff81052935>] irq_exit+0x95/0xa0 [<ffffffff81385f15>] do_IRQ+0x75/0xf0 [<ffffffff8100cad3>] ret_from_intr+0x0/0xf <EOI> [<ffffffff8123e60b>] ? acpi_idle_enter_bm+0x24d/0x27f [<ffffffff8123e608>] ? acpi_idle_enter_bm+0x24a/0x27f [<ffffffff812dd283>] ? cpuidle_idle_call+0xa3/0x100 [<ffffffff8100ae80>] ? cpu_idle+0x70/0xc0 [<ffffffff81379eea>] ? start_secondary+0x189/0x18e#
# Automatically generated make config: don't edit # Linux kernel version: 2.6.31-rc5
# Tue Aug 11 13:46:11 2009
#CONFIG_64BIT=y
#CONFIG_X86_32is not setCONFIG_X86_64=yCONFIG_X86=yCONFIG_OUTPUT_FORMAT="elf64-x86-64"CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"CONFIG_GENERIC_TIME=yCONFIG_GENERIC_CMOS_UPDATE=yCONFIG_CLOCKSOURCE_WATCHDOG=yCONFIG_GENERIC_CLOCKEVENTS=yCONFIG_GENERIC_CLOCKEVENTS_BROADCAST=yCONFIG_LOCKDEP_SUPPORT=yCONFIG_STACKTRACE_SUPPORT=yCONFIG_HAVE_LATENCYTOP_SUPPORT=yCONFIG_FAST_CMPXCHG_LOCAL=yCONFIG_MMU=yCONFIG_ZONE_DMA=yCONFIG_GENERIC_ISA_DMA=yCONFIG_GENERIC_IOMAP=yCONFIG_GENERIC_BUG=yCONFIG_GENERIC_BUG_RELATIVE_POINTERS=yCONFIG_GENERIC_HWEIGHT=yCONFIG_ARCH_MAY_HAVE_PC_FDC=yCONFIG_RWSEM_GENERIC_SPINLOCK=y
#CONFIG_RWSEM_XCHGADD_ALGORITHMis not setCONFIG_ARCH_HAS_CPU_IDLE_WAIT=yCONFIG_GENERIC_CALIBRATE_DELAY=yCONFIG_GENERIC_TIME_VSYSCALL=yCONFIG_ARCH_HAS_CPU_RELAX=yCONFIG_ARCH_HAS_DEFAULT_IDLE=yCONFIG_ARCH_HAS_CACHE_LINE_SIZE=yCONFIG_HAVE_SETUP_PER_CPU_AREA=yCONFIG_HAVE_DYNAMIC_PER_CPU_AREA=yCONFIG_HAVE_CPUMASK_OF_CPU_MAP=yCONFIG_ARCH_HIBERNATION_POSSIBLE=yCONFIG_ARCH_SUSPEND_POSSIBLE=yCONFIG_ZONE_DMA32=yCONFIG_ARCH_POPULATES_NODE_MAP=yCONFIG_AUDIT_ARCH=yCONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=yCONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=yCONFIG_GENERIC_HARDIRQS=yCONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=yCONFIG_GENERIC_IRQ_PROBE=yCONFIG_GENERIC_PENDING_IRQ=yCONFIG_USE_GENERIC_SMP_HELPERS=yCONFIG_X86_64_SMP=yCONFIG_X86_HT=yCONFIG_X86_TRAMPOLINE=y
#CONFIG_KTIME_SCALARis not setCONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"CONFIG_CONSTRUCTORS=y#
# General setup
#CONFIG_EXPERIMENTAL=yCONFIG_LOCK_KERNEL=yCONFIG_INIT_ENV_ARG_LIMIT=32CONFIG_LOCALVERSION=""CONFIG_LOCALVERSION_AUTO=yCONFIG_HAVE_KERNEL_GZIP=yCONFIG_HAVE_KERNEL_BZIP2=yCONFIG_HAVE_KERNEL_LZMA=yCONFIG_KERNEL_GZIP=y
#CONFIG_KERNEL_BZIP2is not set
#CONFIG_KERNEL_LZMAis not setCONFIG_SWAP=yCONFIG_SYSVIPC=yCONFIG_SYSVIPC_SYSCTL=yCONFIG_POSIX_MQUEUE=yCONFIG_POSIX_MQUEUE_SYSCTL=yCONFIG_BSD_PROCESS_ACCT=yCONFIG_BSD_PROCESS_ACCT_V3=yCONFIG_TASKSTATS=yCONFIG_TASK_DELAY_ACCT=yCONFIG_TASK_XACCT=yCONFIG_TASK_IO_ACCOUNTING=yCONFIG_AUDIT=yCONFIG_AUDITSYSCALL=yCONFIG_AUDIT_TREE=y#
# RCU Subsystem
#CONFIG_CLASSIC_RCU=y
#CONFIG_TREE_RCUis not set
#CONFIG_PREEMPT_RCUis not set
#CONFIG_TREE_RCU_TRACEis not set
#CONFIG_PREEMPT_RCU_TRACEis not setCONFIG_IKCONFIG=mCONFIG_IKCONFIG_PROC=yCONFIG_LOG_BUF_SHIFT=18CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
#CONFIG_GROUP_SCHEDis not set
#CONFIG_CGROUPSis not set
#CONFIG_SYSFS_DEPRECATED_V2is not setCONFIG_RELAY=y
#CONFIG_NAMESPACESis not setCONFIG_BLK_DEV_INITRD=yCONFIG_INITRAMFS_SOURCE=""CONFIG_RD_GZIP=yCONFIG_RD_BZIP2=y
#CONFIG_RD_LZMAis not set
#CONFIG_CC_OPTIMIZE_FOR_SIZEis not setCONFIG_SYSCTL=yCONFIG_ANON_INODES=yCONFIG_EMBEDDED=yCONFIG_UID16=yCONFIG_SYSCTL_SYSCALL=yCONFIG_KALLSYMS=yCONFIG_KALLSYMS_ALL=yCONFIG_KALLSYMS_EXTRA_PASS=yCONFIG_HOTPLUG=yCONFIG_PRINTK=yCONFIG_BUG=yCONFIG_ELF_CORE=y
#CONFIG_PCSPKR_PLATFORMis not setCONFIG_BASE_FULL=yCONFIG_FUTEX=yCONFIG_EPOLL=yCONFIG_SIGNALFD=yCONFIG_TIMERFD=yCONFIG_EVENTFD=yCONFIG_SHMEM=yCONFIG_AIO=yCONFIG_HAVE_PERF_COUNTERS=y#
# Performance Counters
#CONFIG_PERF_COUNTERS=y
#CONFIG_EVENT_PROFILEis not setCONFIG_VM_EVENT_COUNTERS=yCONFIG_PCI_QUIRKS=yCONFIG_SLUB_DEBUG=y
#CONFIG_STRIP_ASM_SYMSis not set
#CONFIG_COMPAT_BRKis not set
#CONFIG_SLABis not setCONFIG_SLUB=y
#CONFIG_SLOBis not setCONFIG_PROFILING=yCONFIG_TRACEPOINTS=yCONFIG_MARKERS=yCONFIG_OPROFILE=m
#CONFIG_OPROFILE_IBSis not setCONFIG_HAVE_OPROFILE=yCONFIG_KPROBES=yCONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=yCONFIG_KRETPROBES=yCONFIG_HAVE_IOREMAP_PROT=yCONFIG_HAVE_KPROBES=yCONFIG_HAVE_KRETPROBES=yCONFIG_HAVE_ARCH_TRACEHOOK=yCONFIG_HAVE_DMA_ATTRS=yCONFIG_HAVE_DMA_API_DEBUG=y#
# GCOV-based kernel profiling
#
#CONFIG_GCOV_KERNELis not set
#CONFIG_SLOW_WORKis not set
#CONFIG_HAVE_GENERIC_DMA_COHERENTis not setCONFIG_SLABINFO=yCONFIG_RT_MUTEXES=yCONFIG_BASE_SMALL=0CONFIG_MODULES=yCONFIG_MODULE_FORCE_LOAD=yCONFIG_MODULE_UNLOAD=yCONFIG_MODULE_FORCE_UNLOAD=y
#CONFIG_MODVERSIONSis not set
#CONFIG_MODULE_SRCVERSION_ALLis not setCONFIG_STOP_MACHINE=yCONFIG_BLOCK=y
#CONFIG_BLK_DEV_BSGis not set
#CONFIG_BLK_DEV_INTEGRITYis not setCONFIG_BLOCK_COMPAT=y#
# IO Schedulers
#CONFIG_IOSCHED_NOOP=yCONFIG_IOSCHED_AS=yCONFIG_IOSCHED_DEADLINE=yCONFIG_IOSCHED_CFQ=y
#CONFIG_DEFAULT_ASis not set
#CONFIG_DEFAULT_DEADLINEis not setCONFIG_DEFAULT_CFQ=y
#CONFIG_DEFAULT_NOOPis not setCONFIG_DEFAULT_IOSCHED="cfq"CONFIG_PREEMPT_NOTIFIERS=yCONFIG_FREEZER=y#
# Processor type and features
#CONFIG_TICK_ONESHOT=yCONFIG_NO_HZ=yCONFIG_HIGH_RES_TIMERS=yCONFIG_GENERIC_CLOCKEVENTS_BUILD=yCONFIG_SMP=y
#CONFIG_SPARSE_IRQis not setCONFIG_X86_MPPARSE=yCONFIG_X86_EXTENDED_PLATFORM=y
#CONFIG_X86_VSMPis not setCONFIG_SCHED_OMIT_FRAME_POINTER=y
#CONFIG_PARAVIRT_GUESTis not setCONFIG_MEMTEST=y
#CONFIG_M386is not set
#CONFIG_M486is not set
#CONFIG_M586is not set
#CONFIG_M586TSCis not set
#CONFIG_M586MMXis not set
#CONFIG_M686is not set
#CONFIG_MPENTIUMIIis not set
#CONFIG_MPENTIUMIIIis not set
#CONFIG_MPENTIUMMis not set
#CONFIG_MPENTIUM4is not set
#CONFIG_MK6is not set
#CONFIG_MK7is not set
#CONFIG_MK8is not set
#CONFIG_MCRUSOEis not set
#CONFIG_MEFFICEONis not set
#CONFIG_MWINCHIPC6is not set
#CONFIG_MWINCHIP3Dis not set
#CONFIG_MGEODEGX1is not set
#CONFIG_MGEODE_LXis not set
#CONFIG_MCYRIXIIIis not set
#CONFIG_MVIAC3_2is not set
#CONFIG_MVIAC7is not set
#CONFIG_MPSCis not setCONFIG_MCORE2=y
#CONFIG_GENERIC_CPUis not setCONFIG_X86_CPU=yCONFIG_X86_L1_CACHE_BYTES=64CONFIG_X86_INTERNODE_CACHE_BYTES=64CONFIG_X86_CMPXCHG=yCONFIG_X86_L1_CACHE_SHIFT=6CONFIG_X86_WP_WORKS_OK=yCONFIG_X86_INTEL_USERCOPY=yCONFIG_X86_USE_PPRO_CHECKSUM=yCONFIG_X86_P6_NOP=yCONFIG_X86_TSC=yCONFIG_X86_CMPXCHG64=yCONFIG_X86_CMOV=yCONFIG_X86_MINIMUM_CPU_FAMILY=64CONFIG_X86_DEBUGCTLMSR=y
#CONFIG_PROCESSOR_SELECTis not setCONFIG_CPU_SUP_INTEL=yCONFIG_CPU_SUP_AMD=yCONFIG_CPU_SUP_CENTAUR=y
#CONFIG_X86_DSis not setCONFIG_HPET_TIMER=yCONFIG_HPET_EMULATE_RTC=yCONFIG_DMI=yCONFIG_GART_IOMMU=y
#CONFIG_CALGARY_IOMMUis not set
#CONFIG_AMD_IOMMUis not setCONFIG_SWIOTLB=yCONFIG_IOMMU_HELPER=y
#CONFIG_IOMMU_APIis not set
#CONFIG_MAXSMPis not setCONFIG_NR_CPUS=4
#CONFIG_SCHED_SMTis not setCONFIG_SCHED_MC=y
#CONFIG_PREEMPT_NONEis not setCONFIG_PREEMPT_VOLUNTARY=y
#CONFIG_PREEMPTis not setCONFIG_X86_LOCAL_APIC=yCONFIG_X86_IO_APIC=y
#CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQSis not setCONFIG_X86_MCE=yCONFIG_X86_NEW_MCE=yCONFIG_X86_MCE_INTEL=yCONFIG_X86_MCE_AMD=yCONFIG_X86_MCE_THRESHOLD=y
#CONFIG_X86_MCE_INJECTis not setCONFIG_X86_THERMAL_VECTOR=y
#CONFIG_I8Kis not setCONFIG_MICROCODE=mCONFIG_MICROCODE_INTEL=y
#CONFIG_MICROCODE_AMDis not setCONFIG_MICROCODE_OLD_INTERFACE=yCONFIG_X86_MSR=mCONFIG_X86_CPUID=mCONFIG_X86_CPU_DEBUG=mCONFIG_ARCH_PHYS_ADDR_T_64BIT=yCONFIG_DIRECT_GBPAGES=y
#CONFIG_NUMAis not setCONFIG_ARCH_SPARSEMEM_DEFAULT=yCONFIG_ARCH_SPARSEMEM_ENABLE=yCONFIG_ARCH_SELECT_MEMORY_MODEL=yCONFIG_SELECT_MEMORY_MODEL=y
#CONFIG_FLATMEM_MANUALis not set
#CONFIG_DISCONTIGMEM_MANUALis not setCONFIG_SPARSEMEM_MANUAL=yCONFIG_SPARSEMEM=yCONFIG_HAVE_MEMORY_PRESENT=yCONFIG_SPARSEMEM_EXTREME=yCONFIG_SPARSEMEM_VMEMMAP_ENABLE=yCONFIG_SPARSEMEM_VMEMMAP=y#
# Memory hotplug is currently incompatible with Software Suspend #CONFIG_PAGEFLAGS_EXTENDED=yCONFIG_SPLIT_PTLOCK_CPUS=4CONFIG_PHYS_ADDR_T_64BIT=yCONFIG_ZONE_DMA_FLAG=1CONFIG_BOUNCE=yCONFIG_VIRT_TO_BUS=yCONFIG_HAVE_MLOCK=yCONFIG_HAVE_MLOCKED_PAGE_BIT=yCONFIG_MMU_NOTIFIER=yCONFIG_DEFAULT_MMAP_MIN_ADDR=4096CONFIG_X86_CHECK_BIOS_CORRUPTION=yCONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=yCONFIG_X86_RESERVE_LOW_64K=yCONFIG_MTRR=yCONFIG_MTRR_SANITIZER=yCONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=1CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1CONFIG_X86_PAT=yCONFIG_EFI=y
#CONFIG_SECCOMPis not set
#CONFIG_CC_STACKPROTECTORis not set
#CONFIG_HZ_100is not set
#CONFIG_HZ_250is not setCONFIG_HZ_300=y
#CONFIG_HZ_1000is not setCONFIG_HZ=300CONFIG_SCHED_HRTICK=yCONFIG_KEXEC=y
#CONFIG_CRASH_DUMPis not set
#CONFIG_KEXEC_JUMPis not setCONFIG_PHYSICAL_START=0x200000
#CONFIG_RELOCATABLEis not setCONFIG_PHYSICAL_ALIGN=0x1000000CONFIG_HOTPLUG_CPU=y
#CONFIG_COMPAT_VDSOis not setCONFIG_CMDLINE_BOOL=yCONFIG_CMDLINE=""
#CONFIG_CMDLINE_OVERRIDEis not setCONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y#
# Power management and ACPI options
#CONFIG_ARCH_HIBERNATION_HEADER=yCONFIG_PM=y
#CONFIG_PM_DEBUGis not setCONFIG_PM_SLEEP_SMP=yCONFIG_PM_SLEEP=yCONFIG_SUSPEND=yCONFIG_SUSPEND_FREEZER=yCONFIG_HIBERNATION_NVS=yCONFIG_HIBERNATION=yCONFIG_PM_STD_PARTITION=""CONFIG_ACPI=yCONFIG_ACPI_SLEEP=yCONFIG_ACPI_PROCFS=yCONFIG_ACPI_PROCFS_POWER=yCONFIG_ACPI_SYSFS_POWER=yCONFIG_ACPI_PROC_EVENT=yCONFIG_ACPI_AC=mCONFIG_ACPI_BATTERY=mCONFIG_ACPI_BUTTON=mCONFIG_ACPI_VIDEO=mCONFIG_ACPI_FAN=mCONFIG_ACPI_DOCK=yCONFIG_ACPI_PROCESSOR=yCONFIG_ACPI_HOTPLUG_CPU=yCONFIG_ACPI_THERMAL=y
#CONFIG_ACPI_CUSTOM_DSDTis not setCONFIG_ACPI_BLACKLIST_YEAR=0CONFIG_ACPI_DEBUG=y
#CONFIG_ACPI_DEBUG_FUNC_TRACEis not setCONFIG_ACPI_PCI_SLOT=mCONFIG_X86_PM_TIMER=yCONFIG_ACPI_CONTAINER=yCONFIG_ACPI_SBS=m#
# CPU Frequency scaling
#CONFIG_CPU_FREQ=yCONFIG_CPU_FREQ_TABLE=y
#CONFIG_CPU_FREQ_DEBUGis not setCONFIG_CPU_FREQ_STAT=yCONFIG_CPU_FREQ_STAT_DETAILS=y
#CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCEis not set #CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVEis not set #CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACEis not setCONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
#CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVEis not setCONFIG_CPU_FREQ_GOV_PERFORMANCE=yCONFIG_CPU_FREQ_GOV_POWERSAVE=mCONFIG_CPU_FREQ_GOV_USERSPACE=mCONFIG_CPU_FREQ_GOV_ONDEMAND=y
#CONFIG_CPU_FREQ_GOV_CONSERVATIVEis not set#
# CPUFreq processor drivers
#CONFIG_X86_ACPI_CPUFREQ=y
#CONFIG_X86_POWERNOW_K8is not set
#CONFIG_X86_SPEEDSTEP_CENTRINOis not setCONFIG_X86_P4_CLOCKMOD=m#
# shared options # CONFIG_X86_SPEEDSTEP_LIB=m CONFIG_CPU_IDLE=y CONFIG_CPU_IDLE_GOV_LADDER=y CONFIG_CPU_IDLE_GOV_MENU=y#
# Memory power savings
#
#CONFIG_I7300_IDLEis not set#
# Bus options (PCI etc.)
#CONFIG_PCI=yCONFIG_PCI_DIRECT=yCONFIG_PCI_MMCONFIG=yCONFIG_PCI_DOMAINS=y
#CONFIG_DMARis not set
#CONFIG_INTR_REMAPis not setCONFIG_PCIEPORTBUS=yCONFIG_HOTPLUG_PCI_PCIE=mCONFIG_PCIEAER=y
#CONFIG_PCIE_ECRCis not set
#CONFIG_PCIEAER_INJECTis not setCONFIG_PCIEASPM=y
#CONFIG_PCIEASPM_DEBUGis not setCONFIG_ARCH_SUPPORTS_MSI=yCONFIG_PCI_MSI=yCONFIG_PCI_LEGACY=y
#CONFIG_PCI_DEBUGis not set
#CONFIG_PCI_STUBis not set
#CONFIG_HT_IRQis not set
#CONFIG_PCI_IOVis not setCONFIG_ISA_DMA_API=yCONFIG_K8_NB=yCONFIG_PCCARD=m
#CONFIG_PCMCIA_DEBUGis not setCONFIG_PCMCIA=mCONFIG_PCMCIA_LOAD_CIS=yCONFIG_PCMCIA_IOCTL=yCONFIG_CARDBUS=y#
# PC-card bridges
#
#CONFIG_YENTAis not set
#CONFIG_PD6729is not set
#CONFIG_I82092is not setCONFIG_HOTPLUG_PCI=m
#CONFIG_HOTPLUG_PCI_FAKEis not setCONFIG_HOTPLUG_PCI_ACPI=mCONFIG_HOTPLUG_PCI_ACPI_IBM=m
#CONFIG_HOTPLUG_PCI_CPCIis not set
#CONFIG_HOTPLUG_PCI_SHPCis not set#
# Executable file formats / Emulations
#CONFIG_BINFMT_ELF=yCONFIG_COMPAT_BINFMT_ELF=yCONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
#CONFIG_HAVE_AOUTis not setCONFIG_BINFMT_MISC=mCONFIG_IA32_EMULATION=yCONFIG_IA32_AOUT=mCONFIG_COMPAT=yCONFIG_COMPAT_FOR_U64_ALIGNMENT=yCONFIG_SYSVIPC_COMPAT=yCONFIG_NET=y#
# Networking options
#CONFIG_PACKET=yCONFIG_PACKET_MMAP=yCONFIG_UNIX=yCONFIG_XFRM=y
#CONFIG_XFRM_USERis not set
#CONFIG_XFRM_SUB_POLICYis not set
#CONFIG_XFRM_MIGRATEis not set
#CONFIG_XFRM_STATISTICSis not set
#CONFIG_NET_KEYis not setCONFIG_INET=yCONFIG_IP_MULTICAST=y
#CONFIG_IP_ADVANCED_ROUTERis not setCONFIG_IP_FIB_HASH=yCONFIG_IP_PNP=yCONFIG_IP_PNP_DHCP=yCONFIG_IP_PNP_BOOTP=y
#CONFIG_IP_PNP_RARPis not set
#CONFIG_NET_IPIPis not set
#CONFIG_NET_IPGREis not setCONFIG_IP_MROUTE=y
#CONFIG_IP_PIMSM_V1is not set
#CONFIG_IP_PIMSM_V2is not set
#CONFIG_ARPDis not setCONFIG_SYN_COOKIES=y
#CONFIG_INET_AHis not set
#CONFIG_INET_ESPis not set
#CONFIG_INET_IPCOMPis not set
#CONFIG_INET_XFRM_TUNNELis not setCONFIG_INET_TUNNEL=m
#CONFIG_INET_XFRM_MODE_TRANSPORTis not set #CONFIG_INET_XFRM_MODE_TUNNELis not set
#CONFIG_INET_XFRM_MODE_BEETis not set
#CONFIG_INET_LROis not set
#CONFIG_INET_DIAGis not setCONFIG_TCP_CONG_ADVANCED=yCONFIG_TCP_CONG_BIC=mCONFIG_TCP_CONG_CUBIC=yCONFIG_TCP_CONG_WESTWOOD=mCONFIG_TCP_CONG_HTCP=m
#CONFIG_TCP_CONG_HSTCPis not set
#CONFIG_TCP_CONG_HYBLAis not set
#CONFIG_TCP_CONG_VEGASis not set
#CONFIG_TCP_CONG_SCALABLEis not set
#CONFIG_TCP_CONG_LPis not set
#CONFIG_TCP_CONG_VENOis not set
#CONFIG_TCP_CONG_YEAHis not set
#CONFIG_TCP_CONG_ILLINOISis not set
#CONFIG_DEFAULT_BICis not setCONFIG_DEFAULT_CUBIC=y
#CONFIG_DEFAULT_HTCPis not set
#CONFIG_DEFAULT_VEGASis not set
#CONFIG_DEFAULT_WESTWOODis not set
#CONFIG_DEFAULT_RENOis not setCONFIG_DEFAULT_TCP_CONG="cubic"
#CONFIG_TCP_MD5SIGis not setCONFIG_IPV6=m
#CONFIG_IPV6_PRIVACYis not set
#CONFIG_IPV6_ROUTER_PREFis not set
#CONFIG_IPV6_OPTIMISTIC_DADis not set
#CONFIG_INET6_AHis not set
#CONFIG_INET6_ESPis not set
#CONFIG_INET6_IPCOMPis not set
#CONFIG_IPV6_MIP6is not set
#CONFIG_INET6_XFRM_TUNNELis not set
#CONFIG_INET6_TUNNELis not setCONFIG_INET6_XFRM_MODE_TRANSPORT=mCONFIG_INET6_XFRM_MODE_TUNNEL=mCONFIG_INET6_XFRM_MODE_BEET=m
#CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATIONis not setCONFIG_IPV6_SIT=mCONFIG_IPV6_NDISC_NODETYPE=y
#CONFIG_IPV6_TUNNELis not set
#CONFIG_IPV6_MULTIPLE_TABLESis not set
#CONFIG_IPV6_MROUTEis not set
#CONFIG_NETLABELis not setCONFIG_NETWORK_SECMARK=yCONFIG_NETFILTER=y
#CONFIG_NETFILTER_DEBUGis not setCONFIG_NETFILTER_ADVANCED=yCONFIG_BRIDGE_NETFILTER=y#
# Core Netfilter Configuration
#CONFIG_NETFILTER_NETLINK=m
#CONFIG_NETFILTER_NETLINK_QUEUEis not setCONFIG_NETFILTER_NETLINK_LOG=mCONFIG_NF_CONNTRACK=mCONFIG_NF_CT_ACCT=yCONFIG_NF_CONNTRACK_MARK=yCONFIG_NF_CONNTRACK_SECMARK=yCONFIG_NF_CONNTRACK_EVENTS=y
#CONFIG_NF_CT_PROTO_DCCPis not set
#CONFIG_NF_CT_PROTO_SCTPis not set
#CONFIG_NF_CT_PROTO_UDPLITEis not set
#CONFIG_NF_CONNTRACK_AMANDAis not setCONFIG_NF_CONNTRACK_FTP=m
#CONFIG_NF_CONNTRACK_H323is not set
#CONFIG_NF_CONNTRACK_IRCis not set
#CONFIG_NF_CONNTRACK_NETBIOS_NSis not set #CONFIG_NF_CONNTRACK_PPTPis not set
#CONFIG_NF_CONNTRACK_SANEis not set
#CONFIG_NF_CONNTRACK_SIPis not set
#CONFIG_NF_CONNTRACK_TFTPis not setCONFIG_NF_CT_NETLINK=m
#CONFIG_NETFILTER_TPROXYis not setCONFIG_NETFILTER_XTABLES=mCONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
#CONFIG_NETFILTER_XT_TARGET_CONNMARKis not set #CONFIG_NETFILTER_XT_TARGET_CONNSECMARKis not set #CONFIG_NETFILTER_XT_TARGET_DSCPis not setCONFIG_NETFILTER_XT_TARGET_HL=m
#CONFIG_NETFILTER_XT_TARGET_LEDis not setCONFIG_NETFILTER_XT_TARGET_MARK=mCONFIG_NETFILTER_XT_TARGET_NFLOG=mCONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
#CONFIG_NETFILTER_XT_TARGET_RATEESTis not set #CONFIG_NETFILTER_XT_TARGET_SECMARKis not set #CONFIG_NETFILTER_XT_TARGET_TCPMSSis not set #CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIPis not set #CONFIG_NETFILTER_XT_MATCH_CLUSTERis not set #CONFIG_NETFILTER_XT_MATCH_COMMENTis not set #CONFIG_NETFILTER_XT_MATCH_CONNBYTESis not set #CONFIG_NETFILTER_XT_MATCH_CONNLIMITis not setCONFIG_NETFILTER_XT_MATCH_CONNMARK=mCONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
#CONFIG_NETFILTER_XT_MATCH_DCCPis not set #CONFIG_NETFILTER_XT_MATCH_DSCPis not set #CONFIG_NETFILTER_XT_MATCH_ESPis not set #CONFIG_NETFILTER_XT_MATCH_HASHLIMITis not set #CONFIG_NETFILTER_XT_MATCH_HELPERis not setCONFIG_NETFILTER_XT_MATCH_HL=m
#CONFIG_NETFILTER_XT_MATCH_IPRANGEis not set #CONFIG_NETFILTER_XT_MATCH_LENGTHis not set #CONFIG_NETFILTER_XT_MATCH_LIMITis not set #CONFIG_NETFILTER_XT_MATCH_MACis not set #CONFIG_NETFILTER_XT_MATCH_MARKis not set #CONFIG_NETFILTER_XT_MATCH_MULTIPORTis not set #CONFIG_NETFILTER_XT_MATCH_OWNERis not setCONFIG_NETFILTER_XT_MATCH_POLICY=m
#CONFIG_NETFILTER_XT_MATCH_PHYSDEVis not set #CONFIG_NETFILTER_XT_MATCH_PKTTYPEis not set #CONFIG_NETFILTER_XT_MATCH_QUOTAis not set #CONFIG_NETFILTER_XT_MATCH_RATEESTis not set #CONFIG_NETFILTER_XT_MATCH_REALMis not set #CONFIG_NETFILTER_XT_MATCH_RECENTis not set #CONFIG_NETFILTER_XT_MATCH_SCTPis not setCONFIG_NETFILTER_XT_MATCH_STATE=m
#CONFIG_NETFILTER_XT_MATCH_STATISTICis not set #CONFIG_NETFILTER_XT_MATCH_STRINGis not set #CONFIG_NETFILTER_XT_MATCH_TCPMSSis not set #CONFIG_NETFILTER_XT_MATCH_TIMEis not set #CONFIG_NETFILTER_XT_MATCH_U32is not set #CONFIG_NETFILTER_XT_MATCH_OSFis not set #CONFIG_IP_VSis not set#
# IP: Netfilter Configuration
#CONFIG_NF_DEFRAG_IPV4=mCONFIG_NF_CONNTRACK_IPV4=mCONFIG_NF_CONNTRACK_PROC_COMPAT=y
#CONFIG_IP_NF_QUEUEis not setCONFIG_IP_NF_IPTABLES=mCONFIG_IP_NF_MATCH_ADDRTYPE=mCONFIG_IP_NF_MATCH_AH=mCONFIG_IP_NF_MATCH_ECN=mCONFIG_IP_NF_MATCH_TTL=mCONFIG_IP_NF_FILTER=mCONFIG_IP_NF_TARGET_REJECT=mCONFIG_IP_NF_TARGET_LOG=mCONFIG_IP_NF_TARGET_ULOG=mCONFIG_NF_NAT=mCONFIG_NF_NAT_NEEDED=yCONFIG_IP_NF_TARGET_MASQUERADE=m
#CONFIG_IP_NF_TARGET_NETMAPis not setCONFIG_IP_NF_TARGET_REDIRECT=m
#CONFIG_NF_NAT_SNMP_BASICis not setCONFIG_NF_NAT_FTP=m
#CONFIG_NF_NAT_IRCis not set
#CONFIG_NF_NAT_TFTPis not set
#CONFIG_NF_NAT_AMANDAis not set
#CONFIG_NF_NAT_PPTPis not set
#CONFIG_NF_NAT_H323is not set
#CONFIG_NF_NAT_SIPis not setCONFIG_IP_NF_MANGLE=m
#CONFIG_IP_NF_TARGET_CLUSTERIPis not setCONFIG_IP_NF_TARGET_ECN=mCONFIG_IP_NF_TARGET_TTL=m
#CONFIG_IP_NF_RAWis not set
#CONFIG_IP_NF_SECURITYis not setCONFIG_IP_NF_ARPTABLES=mCONFIG_IP_NF_ARPFILTER=mCONFIG_IP_NF_ARP_MANGLE=m#
# IPv6: Netfilter Configuration
#CONFIG_NF_CONNTRACK_IPV6=m
#CONFIG_IP6_NF_QUEUEis not setCONFIG_IP6_NF_IPTABLES=m
#CONFIG_IP6_NF_MATCH_AHis not set
#CONFIG_IP6_NF_MATCH_EUI64is not set
#CONFIG_IP6_NF_MATCH_FRAGis not set
#CONFIG_IP6_NF_MATCH_OPTSis not set
#CONFIG_IP6_NF_MATCH_HLis not set
#CONFIG_IP6_NF_MATCH_IPV6HEADERis not set
#CONFIG_IP6_NF_MATCH_MHis not set
#CONFIG_IP6_NF_MATCH_RTis not set
#CONFIG_IP6_NF_TARGET_HLis not set
#CONFIG_IP6_NF_TARGET_LOGis not set
#CONFIG_IP6_NF_FILTERis not set
#CONFIG_IP6_NF_MANGLEis not set
#CONFIG_IP6_NF_RAWis not set
#CONFIG_IP6_NF_SECURITYis not setCONFIG_BRIDGE_NF_EBTABLES=mCONFIG_BRIDGE_EBT_BROUTE=mCONFIG_BRIDGE_EBT_T_FILTER=mCONFIG_BRIDGE_EBT_T_NAT=mCONFIG_BRIDGE_EBT_802_3=mCONFIG_BRIDGE_EBT_AMONG=mCONFIG_BRIDGE_EBT_ARP=mCONFIG_BRIDGE_EBT_IP=m
#CONFIG_BRIDGE_EBT_IP6is not setCONFIG_BRIDGE_EBT_LIMIT=mCONFIG_BRIDGE_EBT_MARK=mCONFIG_BRIDGE_EBT_PKTTYPE=mCONFIG_BRIDGE_EBT_STP=mCONFIG_BRIDGE_EBT_VLAN=mCONFIG_BRIDGE_EBT_ARPREPLY=mCONFIG_BRIDGE_EBT_DNAT=mCONFIG_BRIDGE_EBT_MARK_T=mCONFIG_BRIDGE_EBT_REDIRECT=mCONFIG_BRIDGE_EBT_SNAT=mCONFIG_BRIDGE_EBT_LOG=mCONFIG_BRIDGE_EBT_ULOG=m
#CONFIG_BRIDGE_EBT_NFLOGis not set
#CONFIG_IP_DCCPis not setCONFIG_IP_SCTP=m
#CONFIG_SCTP_DBG_MSGis not set
#CONFIG_SCTP_DBG_OBJCNTis not setCONFIG_SCTP_HMAC_NONE=y
#CONFIG_SCTP_HMAC_SHA1is not set
#CONFIG_SCTP_HMAC_MD5is not set
#CONFIG_TIPCis not set
#CONFIG_ATMis not setCONFIG_STP=mCONFIG_BRIDGE=m
#CONFIG_NET_DSAis not set
#CONFIG_VLAN_8021Qis not set
#CONFIG_DECNETis not setCONFIG_LLC=m
#CONFIG_LLC2is not set
#CONFIG_IPXis not set
#CONFIG_ATALKis not set
#CONFIG_X25is not set
#CONFIG_LAPBis not set
#CONFIG_ECONETis not set
#CONFIG_WAN_ROUTERis not set
#CONFIG_PHONETis not set
#CONFIG_IEEE802154is not set
#CONFIG_NET_SCHEDis not set
#CONFIG_DCBis not set#
# Network testing
#CONFIG_NET_PKTGEN=m
#CONFIG_NET_TCPPROBEis not set
#CONFIG_NET_DROP_MONITORis not set
#CONFIG_HAMRADIOis not set
#CONFIG_CANis not setCONFIG_IRDA=m#
# IrDA protocols
#
#CONFIG_IRLANis not set
#CONFIG_IRCOMMis not set
#CONFIG_IRDA_ULTRAis not set#
# IrDA options
#
#CONFIG_IRDA_CACHE_LAST_LSAPis not set
#CONFIG_IRDA_FAST_RRis not set
#CONFIG_IRDA_DEBUGis not set#
# Infrared-port device drivers
##
# SIR device drivers
#
#CONFIG_IRTTY_SIRis not set#
# Dongle support
#
#CONFIG_KINGSUN_DONGLEis not set
#CONFIG_KSDAZZLE_DONGLEis not set
#CONFIG_KS959_DONGLEis not set#
# FIR device drivers
#
#CONFIG_USB_IRDAis not set
#CONFIG_SIGMATEL_FIRis not set
#CONFIG_NSC_FIRis not set
#CONFIG_WINBOND_FIRis not set
#CONFIG_SMC_IRCC_FIRis not set
#CONFIG_ALI_FIRis not set
#CONFIG_VLSI_FIRis not set
#CONFIG_VIA_FIRis not set
#CONFIG_MCS_FIRis not setCONFIG_BT=mCONFIG_BT_L2CAP=mCONFIG_BT_SCO=mCONFIG_BT_RFCOMM=mCONFIG_BT_RFCOMM_TTY=y
#CONFIG_BT_BNEPis not setCONFIG_BT_HIDP=m#
# Bluetooth device drivers
#CONFIG_BT_HCIBTUSB=m
#CONFIG_BT_HCIBTSDIOis not set
#CONFIG_BT_HCIUARTis not set
#CONFIG_BT_HCIBCM203Xis not set
#CONFIG_BT_HCIBPA10Xis not set
#CONFIG_BT_HCIBFUSBis not set
#CONFIG_BT_HCIDTL1is not set
#CONFIG_BT_HCIBT3Cis not set
#CONFIG_BT_HCIBLUECARDis not set
#CONFIG_BT_HCIBTUARTis not set
#CONFIG_BT_HCIVHCIis not set
#CONFIG_AF_RXRPCis not setCONFIG_WIRELESS=yCONFIG_CFG80211=m
#CONFIG_CFG80211_REG_DEBUGis not set
#CONFIG_CFG80211_DEBUGFSis not set
#CONFIG_WIRELESS_OLD_REGULATORYis not setCONFIG_WIRELESS_EXT=yCONFIG_WIRELESS_EXT_SYSFS=yCONFIG_LIB80211=m
#CONFIG_LIB80211_DEBUGis not setCONFIG_MAC80211=mCONFIG_MAC80211_DEFAULT_PS=yCONFIG_MAC80211_DEFAULT_PS_VALUE=1#
# Rate control algorithm selection
#
#CONFIG_MAC80211_RC_PIDis not setCONFIG_MAC80211_RC_MINSTREL=y
#CONFIG_MAC80211_RC_DEFAULT_PIDis not setCONFIG_MAC80211_RC_DEFAULT_MINSTREL=yCONFIG_MAC80211_RC_DEFAULT="minstrel"CONFIG_MAC80211_LEDS=y
#CONFIG_MAC80211_DEBUGFSis not set
#CONFIG_MAC80211_DEBUG_MENUis not set
#CONFIG_WIMAXis not setCONFIG_RFKILL=mCONFIG_RFKILL_LEDS=yCONFIG_RFKILL_INPUT=y
#CONFIG_NET_9Pis not set#
# Device Drivers
##
# Generic Driver Options
#CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"CONFIG_STANDALONE=yCONFIG_PREVENT_FIRMWARE_BUILD=yCONFIG_FW_LOADER=yCONFIG_FIRMWARE_IN_KERNEL=yCONFIG_EXTRA_FIRMWARE=""
#CONFIG_DEBUG_DRIVERis not set
#CONFIG_DEBUG_DEVRESis not set
#CONFIG_SYS_HYPERVISORis not setCONFIG_CONNECTOR=mCONFIG_MTD=m
#CONFIG_MTD_DEBUGis not setCONFIG_MTD_CONCAT=mCONFIG_MTD_PARTITIONS=yCONFIG_MTD_TESTS=mCONFIG_MTD_REDBOOT_PARTS=mCONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
#CONFIG_MTD_REDBOOT_PARTS_UNALLOCATEDis not set
#CONFIG_MTD_REDBOOT_PARTS_READONLYis not set
#CONFIG_MTD_AR7_PARTSis not set#
# User Modules And Translation Layers
#CONFIG_MTD_CHAR=mCONFIG_MTD_BLKDEVS=mCONFIG_MTD_BLOCK=m
#CONFIG_MTD_BLOCK_ROis not set
#CONFIG_FTLis not set
#CONFIG_NFTLis not set
#CONFIG_INFTLis not set
#CONFIG_RFD_FTLis not set
#CONFIG_SSFDCis not set
#CONFIG_MTD_OOPSis not set#
# RAM/ROM/Flash chip drivers
#
#CONFIG_MTD_CFIis not set
#CONFIG_MTD_JEDECPROBEis not setCONFIG_MTD_MAP_BANK_WIDTH_1=yCONFIG_MTD_MAP_BANK_WIDTH_2=yCONFIG_MTD_MAP_BANK_WIDTH_4=y
#CONFIG_MTD_MAP_BANK_WIDTH_8is not set
#CONFIG_MTD_MAP_BANK_WIDTH_16is not set
#CONFIG_MTD_MAP_BANK_WIDTH_32is not setCONFIG_MTD_CFI_I1=yCONFIG_MTD_CFI_I2=y
#CONFIG_MTD_CFI_I4is not set
#CONFIG_MTD_CFI_I8is not set
#CONFIG_MTD_RAMis not set
#CONFIG_MTD_ROMis not set
#CONFIG_MTD_ABSENTis not set#
# Mapping drivers for chip access
#
#CONFIG_MTD_COMPLEX_MAPPINGSis not set
#CONFIG_MTD_TS5500is not set
#CONFIG_MTD_INTEL_VR_NORis not set
#CONFIG_MTD_PLATRAMis not set#
# Self-contained MTD device drivers
#
#CONFIG_MTD_PMC551is not set
#CONFIG_MTD_SLRAMis not set
#CONFIG_MTD_PHRAMis not setCONFIG_MTD_MTDRAM=mCONFIG_MTDRAM_TOTAL_SIZE=4096CONFIG_MTDRAM_ERASE_SIZE=128CONFIG_MTD_BLOCK2MTD=m#
# Disk-On-Chip Device Drivers
#
#CONFIG_MTD_DOC2000is not set
#CONFIG_MTD_DOC2001is not set
#CONFIG_MTD_DOC2001PLUSis not set
#CONFIG_MTD_NANDis not set
#CONFIG_MTD_ONENANDis not set#
# LPDDR flash memory drivers
#
#CONFIG_MTD_LPDDRis not set#
# UBI - Unsorted block images
#
#CONFIG_MTD_UBIis not set
#CONFIG_PARPORTis not setCONFIG_PNP=yCONFIG_PNP_DEBUG_MESSAGES=y#
# Protocols
#CONFIG_PNPACPI=yCONFIG_BLK_DEV=yCONFIG_BLK_DEV_FD=m
#CONFIG_BLK_CPQ_DAis not set
#CONFIG_BLK_CPQ_CISS_DAis not set
#CONFIG_BLK_DEV_DAC960is not set
#CONFIG_BLK_DEV_UMEMis not set
#CONFIG_BLK_DEV_COW_COMMONis not setCONFIG_BLK_DEV_LOOP=mCONFIG_BLK_DEV_CRYPTOLOOP=mCONFIG_BLK_DEV_NBD=m
#CONFIG_BLK_DEV_SX8is not set
#CONFIG_BLK_DEV_UBis not setCONFIG_BLK_DEV_RAM=yCONFIG_BLK_DEV_RAM_COUNT=16CONFIG_BLK_DEV_RAM_SIZE=8192
#CONFIG_BLK_DEV_XIPis not setCONFIG_CDROM_PKTCDVD=mCONFIG_CDROM_PKTCDVD_BUFFERS=8
#CONFIG_CDROM_PKTCDVD_WCACHEis not set
#CONFIG_ATA_OVER_ETHis not setCONFIG_VIRTIO_BLK=m
#CONFIG_BLK_DEV_HDis not setCONFIG_MISC_DEVICES=y
#CONFIG_IBM_ASMis not set
#CONFIG_PHANTOMis not set
#CONFIG_SGI_IOC4is not set
#CONFIG_TIFM_COREis not set
#CONFIG_ICS932S401is not set
#CONFIG_ENCLOSURE_SERVICESis not set
#CONFIG_HP_ILOis not set
#CONFIG_ISL29003is not set
#CONFIG_C2PORTis not set#
# EEPROM support
#
#CONFIG_EEPROM_AT24is not set
#CONFIG_EEPROM_LEGACYis not set
#CONFIG_EEPROM_MAX6875is not set
#CONFIG_EEPROM_93CX6is not set
#CONFIG_CB710_COREis not setCONFIG_HAVE_IDE=y
#CONFIG_IDEis not set#
# SCSI device support
#CONFIG_RAID_ATTRS=mCONFIG_SCSI=yCONFIG_SCSI_DMA=y
#CONFIG_SCSI_TGTis not set
#CONFIG_SCSI_NETLINKis not set
#CONFIG_SCSI_PROC_FSis not set#
# SCSI support type (disk, tape, CD-ROM)
#CONFIG_BLK_DEV_SD=y
#CONFIG_CHR_DEV_STis not set
#CONFIG_CHR_DEV_OSSTis not setCONFIG_BLK_DEV_SR=m
#CONFIG_BLK_DEV_SR_VENDORis not setCONFIG_CHR_DEV_SG=yCONFIG_CHR_DEV_SCH=mCONFIG_SCSI_MULTI_LUN=yCONFIG_SCSI_CONSTANTS=yCONFIG_SCSI_LOGGING=yCONFIG_SCSI_SCAN_ASYNC=yCONFIG_SCSI_WAIT_SCAN=m#
# SCSI Transports
#CONFIG_SCSI_SPI_ATTRS=y
#CONFIG_SCSI_FC_ATTRSis not set
#CONFIG_SCSI_ISCSI_ATTRSis not set
#CONFIG_SCSI_SAS_LIBSASis not set
#CONFIG_SCSI_SRP_ATTRSis not set
#CONFIG_SCSI_LOWLEVELis not set
#CONFIG_SCSI_LOWLEVEL_PCMCIAis not set
#CONFIG_SCSI_DHis not set
#CONFIG_SCSI_OSD_INITIATORis not setCONFIG_ATA=y
#CONFIG_ATA_NONSTANDARDis not setCONFIG_ATA_ACPI=y
#CONFIG_SATA_PMPis not setCONFIG_SATA_AHCI=y
#CONFIG_SATA_SIL24is not setCONFIG_ATA_SFF=y
#CONFIG_SATA_SVWis not setCONFIG_ATA_PIIX=y
#CONFIG_SATA_MVis not set
#CONFIG_SATA_NVis not set
#CONFIG_PDC_ADMAis not set
#CONFIG_SATA_QSTORis not set
#CONFIG_SATA_PROMISEis not set
#CONFIG_SATA_SX4is not set
#CONFIG_SATA_SILis not set
#CONFIG_SATA_SISis not set
#CONFIG_SATA_ULIis not set
#CONFIG_SATA_VIAis not set
#CONFIG_SATA_VITESSEis not set
#CONFIG_SATA_INIC162Xis not setCONFIG_PATA_ACPI=m
#CONFIG_PATA_ALIis not set
#CONFIG_PATA_AMDis not set
#CONFIG_PATA_ARTOPis not set
#CONFIG_PATA_ATIIXPis not set
#CONFIG_PATA_CMD640_PCIis not set
#CONFIG_PATA_CMD64Xis not set
#CONFIG_PATA_CS5520is not set
#CONFIG_PATA_CS5530is not set
#CONFIG_PATA_CYPRESSis not set
#CONFIG_PATA_EFARis not setCONFIG_ATA_GENERIC=yCONFIG_PATA_HPT366=y
#CONFIG_PATA_HPT37Xis not set
#CONFIG_PATA_HPT3X2Nis not set
#CONFIG_PATA_HPT3X3is not set
#CONFIG_PATA_IT821Xis not set
#CONFIG_PATA_IT8213is not set
#CONFIG_PATA_JMICRONis not set
#CONFIG_PATA_TRIFLEXis not set
#CONFIG_PATA_MARVELLis not setCONFIG_PATA_MPIIX=yCONFIG_PATA_OLDPIIX=y
#CONFIG_PATA_NETCELLis not set
#CONFIG_PATA_NINJA32is not set
#CONFIG_PATA_NS87410is not set
#CONFIG_PATA_NS87415is not set
#CONFIG_PATA_OPTIis not set
#CONFIG_PATA_OPTIDMAis not set
#CONFIG_PATA_PCMCIAis not set
#CONFIG_PATA_PDC_OLDis not set
#CONFIG_PATA_RADISYSis not set
#CONFIG_PATA_RZ1000is not set
#CONFIG_PATA_SC1200is not set
#CONFIG_PATA_SERVERWORKSis not set
#CONFIG_PATA_PDC2027Xis not set
#CONFIG_PATA_SIL680is not set
#CONFIG_PATA_SISis not set
#CONFIG_PATA_VIAis not set
#CONFIG_PATA_WINBONDis not set
#CONFIG_PATA_PLATFORMis not set
#CONFIG_PATA_SCHis not setCONFIG_MD=yCONFIG_BLK_DEV_MD=mCONFIG_MD_LINEAR=mCONFIG_MD_RAID0=mCONFIG_MD_RAID1=m
#CONFIG_MD_RAID10is not setCONFIG_MD_RAID456=mCONFIG_MD_RAID6_PQ=m
#CONFIG_MD_MULTIPATHis not setCONFIG_MD_FAULTY=mCONFIG_BLK_DEV_DM=mCONFIG_DM_DEBUG=yCONFIG_DM_CRYPT=mCONFIG_DM_SNAPSHOT=mCONFIG_DM_MIRROR=mCONFIG_DM_LOG_USERSPACE=mCONFIG_DM_ZERO=mCONFIG_DM_MULTIPATH=m
#CONFIG_DM_MULTIPATH_QLis not set
#CONFIG_DM_MULTIPATH_STis not setCONFIG_DM_DELAY=mCONFIG_DM_UEVENT=yCONFIG_FUSION=yCONFIG_FUSION_SPI=y
#CONFIG_FUSION_FCis not set
#CONFIG_FUSION_SASis not setCONFIG_FUSION_MAX_SGE=128CONFIG_FUSION_CTL=y
#CONFIG_FUSION_LOGGINGis not set#
# IEEE 1394 (FireWire) support
##
# You can enable one or both FireWire driver stacks. ##
# See the help texts for more information. #
#CONFIG_FIREWIREis not set
#CONFIG_IEEE1394is not set
#CONFIG_I2Ois not set
#CONFIG_MACINTOSH_DRIVERSis not setCONFIG_NETDEVICES=yCONFIG_DUMMY=m
#CONFIG_BONDINGis not set
#CONFIG_MACVLANis not set
#CONFIG_EQUALIZERis not setCONFIG_TUN=mCONFIG_VETH=m
#CONFIG_NET_SB1000is not set
#CONFIG_ARCNETis not set
#CONFIG_PHYLIBis not setCONFIG_NET_ETHERNET=yCONFIG_MII=m
#CONFIG_HAPPYMEALis not set
#CONFIG_SUNGEMis not set
#CONFIG_CASSINIis not set
#CONFIG_NET_VENDOR_3COMis not set
#CONFIG_ETHOCis not set
#CONFIG_DNETis not set
#CONFIG_NET_TULIPis not set
#CONFIG_HP100is not set
#CONFIG_IBM_NEW_EMAC_ZMIIis not set
#CONFIG_IBM_NEW_EMAC_RGMIIis not set
#CONFIG_IBM_NEW_EMAC_TAHis not set
#CONFIG_IBM_NEW_EMAC_EMAC4is not set
#CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRLis not set #CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTATis not set #CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERRis not setCONFIG_NET_PCI=yCONFIG_PCNET32=m
#CONFIG_AMD8111_ETHis not set
#CONFIG_ADAPTEC_STARFIREis not set
#CONFIG_B44is not set
#CONFIG_FORCEDETHis not set
#CONFIG_E100is not set
#CONFIG_FEALNXis not set
#CONFIG_NATSEMIis not set
#CONFIG_NE2K_PCIis not setCONFIG_8139CP=m
#CONFIG_8139TOOis not set
#CONFIG_R6040is not set
#CONFIG_SIS900is not set
#CONFIG_EPIC100is not set
#CONFIG_SMSC9420is not set
#CONFIG_SUNDANCEis not set
#CONFIG_TLANis not set
#CONFIG_KS8842is not set
#CONFIG_VIA_RHINEis not set
#CONFIG_SC92031is not set
#CONFIG_ATL2is not setCONFIG_NETDEV_1000=y
#CONFIG_ACENICis not set
#CONFIG_DL2Kis not set
#CONFIG_E1000is not setCONFIG_E1000E=m
#CONFIG_IP1000is not set
#CONFIG_IGBis not set
#CONFIG_IGBVFis not set
#CONFIG_NS83820is not set
#CONFIG_HAMACHIis not set
#CONFIG_YELLOWFINis not set
#CONFIG_R8169is not set
#CONFIG_SIS190is not set
#CONFIG_SKGEis not set
#CONFIG_SKY2is not set
#CONFIG_VIA_VELOCITYis not set
#CONFIG_TIGON3is not set
#CONFIG_BNX2is not set
#CONFIG_CNICis not set
#CONFIG_QLA3XXXis not set
#CONFIG_ATL1is not set
#CONFIG_ATL1Eis not set
#CONFIG_ATL1Cis not set
#CONFIG_JMEis not set
#CONFIG_NETDEV_10000is not set
#CONFIG_TRis not set#
# Wireless LAN
#
#CONFIG_WLAN_PRE80211is not setCONFIG_WLAN_80211=y
#CONFIG_PCMCIA_RAYCSis not set
#CONFIG_LIBERTASis not set
#CONFIG_LIBERTAS_THINFIRMis not set
#CONFIG_AIROis not set
#CONFIG_ATMELis not set
#CONFIG_AT76C50X_USBis not set
#CONFIG_AIRO_CSis not set
#CONFIG_PCMCIA_WL3501is not set
#CONFIG_PRISM54is not set
#CONFIG_USB_ZD1201is not set
#CONFIG_USB_NET_RNDIS_WLANis not set
#CONFIG_RTL8180is not set
#CONFIG_RTL8187is not set
#CONFIG_ADM8211is not set
#CONFIG_MAC80211_HWSIMis not set
#CONFIG_MWL8Kis not set
#CONFIG_P54_COMMONis not set
#CONFIG_ATH5Kis not set
#CONFIG_ATH9Kis not set
#CONFIG_AR9170_USBis not set
#CONFIG_IPW2100is not set
#CONFIG_IPW2200is not setCONFIG_IWLWIFI=mCONFIG_IWLWIFI_LEDS=yCONFIG_IWLWIFI_SPECTRUM_MEASUREMENT=yCONFIG_IWLWIFI_DEBUG=y
#CONFIG_IWLAGNis not setCONFIG_IWL3945=mCONFIG_IWL3945_SPECTRUM_MEASUREMENT=y
#CONFIG_HOSTAPis not set
#CONFIG_B43is not set
#CONFIG_B43LEGACYis not set
#CONFIG_ZD1211RWis not set
#CONFIG_RT2X00is not set
#CONFIG_HERMESis not set
#CONFIG_IWMis not set#
# Enable WiMAX (Networking options) to see the WiMAX drivers ##
# USB Network Adapters
#
#CONFIG_USB_CATCis not set
#CONFIG_USB_KAWETHis not set
#CONFIG_USB_PEGASUSis not set
#CONFIG_USB_RTL8150is not set
#CONFIG_USB_USBNETis not setCONFIG_USB_HSO=m
#CONFIG_NET_PCMCIAis not set
#CONFIG_WANis not set
#CONFIG_FDDIis not set
#CONFIG_HIPPIis not set
#CONFIG_PPPis not set
#CONFIG_SLIPis not set
#CONFIG_NET_FCis not setCONFIG_NETCONSOLE=m
#CONFIG_NETCONSOLE_DYNAMICis not setCONFIG_NETPOLL=yCONFIG_NETPOLL_TRAP=yCONFIG_NET_POLL_CONTROLLER=yCONFIG_VIRTIO_NET=m
#CONFIG_ISDNis not set
#CONFIG_PHONEis not set#
# Input device support
#CONFIG_INPUT=y
#CONFIG_INPUT_FF_MEMLESSis not setCONFIG_INPUT_POLLDEV=y#
# Userland interfaces
#CONFIG_INPUT_MOUSEDEV=y
#CONFIG_INPUT_MOUSEDEV_PSAUXis not setCONFIG_INPUT_MOUSEDEV_SCREEN_X=1024CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
#CONFIG_INPUT_JOYDEVis not setCONFIG_INPUT_EVDEV=m
#CONFIG_INPUT_EVBUGis not set#
# Input Device Drivers
#CONFIG_INPUT_KEYBOARD=yCONFIG_KEYBOARD_ATKBD=y
#CONFIG_KEYBOARD_LKKBDis not set
#CONFIG_KEYBOARD_LM8323is not set
#CONFIG_KEYBOARD_NEWTONis not set
#CONFIG_KEYBOARD_STOWAWAYis not set
#CONFIG_KEYBOARD_SUNKBDis not set
#CONFIG_KEYBOARD_XTKBDis not setCONFIG_INPUT_MOUSE=yCONFIG_MOUSE_PS2=mCONFIG_MOUSE_PS2_ALPS=yCONFIG_MOUSE_PS2_LOGIPS2PP=yCONFIG_MOUSE_PS2_SYNAPTICS=yCONFIG_MOUSE_PS2_LIFEBOOK=yCONFIG_MOUSE_PS2_TRACKPOINT=y
#CONFIG_MOUSE_PS2_ELANTECHis not set
#CONFIG_MOUSE_PS2_TOUCHKITis not setCONFIG_MOUSE_SERIAL=m
#CONFIG_MOUSE_APPLETOUCHis not set
#CONFIG_MOUSE_BCM5974is not set
#CONFIG_MOUSE_VSXXXAAis not set
#CONFIG_MOUSE_SYNAPTICS_I2Cis not set
#CONFIG_INPUT_JOYSTICKis not set
#CONFIG_INPUT_TABLETis not set
#CONFIG_INPUT_TOUCHSCREENis not setCONFIG_INPUT_MISC=y
#CONFIG_INPUT_APANELis not set
#CONFIG_INPUT_ATLAS_BTNSis not set
#CONFIG_INPUT_ATI_REMOTEis not set
#CONFIG_INPUT_ATI_REMOTE2is not set
#CONFIG_INPUT_KEYSPAN_REMOTEis not set
#CONFIG_INPUT_POWERMATEis not set
#CONFIG_INPUT_YEALINKis not set
#CONFIG_INPUT_CM109is not setCONFIG_INPUT_UINPUT=m#
# Hardware I/O ports
#CONFIG_SERIO=yCONFIG_SERIO_I8042=yCONFIG_SERIO_SERPORT=m
#CONFIG_SERIO_CT82C710is not setCONFIG_SERIO_PCIPS2=mCONFIG_SERIO_LIBPS2=yCONFIG_SERIO_RAW=m
#CONFIG_GAMEPORTis not set#
# Character devices
#CONFIG_VT=yCONFIG_CONSOLE_TRANSLATIONS=yCONFIG_VT_CONSOLE=yCONFIG_HW_CONSOLE=y
#CONFIG_VT_HW_CONSOLE_BINDINGis not setCONFIG_DEVKMEM=y
#CONFIG_SERIAL_NONSTANDARDis not set
#CONFIG_NOZOMIis not set#
# Serial drivers
#CONFIG_SERIAL_8250=yCONFIG_SERIAL_8250_CONSOLE=yCONFIG_FIX_EARLYCON_MEM=yCONFIG_SERIAL_8250_PCI=yCONFIG_SERIAL_8250_PNP=y
#CONFIG_SERIAL_8250_CSis not setCONFIG_SERIAL_8250_NR_UARTS=16CONFIG_SERIAL_8250_RUNTIME_UARTS=4CONFIG_SERIAL_8250_EXTENDED=y
#CONFIG_SERIAL_8250_MANY_PORTSis not setCONFIG_SERIAL_8250_SHARE_IRQ=y
#CONFIG_SERIAL_8250_DETECT_IRQis not setCONFIG_SERIAL_8250_RSA=y#
# Non-8250 serial port support
#CONFIG_SERIAL_CORE=yCONFIG_SERIAL_CORE_CONSOLE=y
#CONFIG_SERIAL_JSMis not setCONFIG_UNIX98_PTYS=y
#CONFIG_DEVPTS_MULTIPLE_INSTANCESis not set
#CONFIG_LEGACY_PTYSis not setCONFIG_HVC_DRIVER=yCONFIG_VIRTIO_CONSOLE=m
#CONFIG_IPMI_HANDLERis not setCONFIG_HW_RANDOM=m
#CONFIG_HW_RANDOM_TIMERIOMEMis not setCONFIG_HW_RANDOM_INTEL=m
#CONFIG_HW_RANDOM_AMDis not set
#CONFIG_HW_RANDOM_VIAis not setCONFIG_HW_RANDOM_VIRTIO=mCONFIG_NVRAM=m
#CONFIG_R3964is not set
#CONFIG_APPLICOMis not set#
# PCMCIA character devices
#
#CONFIG_SYNCLINK_CSis not set
#CONFIG_CARDMAN_4000is not set
#CONFIG_CARDMAN_4040is not set
#CONFIG_IPWIRELESSis not set
#CONFIG_MWAVEis not set
#CONFIG_PC8736x_GPIOis not set
#CONFIG_RAW_DRIVERis not setCONFIG_HPET=yCONFIG_HPET_MMAP=yCONFIG_HANGCHECK_TIMER=m
#CONFIG_TCG_TPMis not set
#CONFIG_TELCLOCKis not setCONFIG_DEVPORT=yCONFIG_I2C=mCONFIG_I2C_BOARDINFO=yCONFIG_I2C_CHARDEV=mCONFIG_I2C_HELPER_AUTO=yCONFIG_I2C_ALGOBIT=m#
# I2C Hardware Bus support
##
# PC SMBus host controller drivers
#
#CONFIG_I2C_ALI1535is not set
#CONFIG_I2C_ALI1563is not set
#CONFIG_I2C_ALI15X3is not set
#CONFIG_I2C_AMD756is not set
#CONFIG_I2C_AMD8111is not setCONFIG_I2C_I801=mCONFIG_I2C_ISCH=mCONFIG_I2C_PIIX4=m
#CONFIG_I2C_NFORCE2is not set
#CONFIG_I2C_SIS5595is not set
#CONFIG_I2C_SIS630is not set
#CONFIG_I2C_SIS96Xis not set
#CONFIG_I2C_VIAis not set
#CONFIG_I2C_VIAPROis not set#
# I2C system bus drivers (mostly embedded / system-on-chip) #
#CONFIG_I2C_OCORESis not set
#CONFIG_I2C_SIMTECis not set#
# External I2C/SMBus adapter drivers
#
#CONFIG_I2C_PARPORT_LIGHTis not set
#CONFIG_I2C_TAOS_EVMis not setCONFIG_I2C_TINY_USB=m#
# Graphics adapter I2C/DDC channel drivers
#
#CONFIG_I2C_VOODOO3is not set#
# Other I2C/SMBus bus drivers
#
#CONFIG_I2C_PCA_PLATFORMis not set
#CONFIG_I2C_STUBis not set#
# Miscellaneous I2C Chip support
#
#CONFIG_DS1682is not set
#CONFIG_SENSORS_PCF8574is not set
#CONFIG_PCF8575is not set
#CONFIG_SENSORS_PCA9539is not set
#CONFIG_SENSORS_TSL2550is not set
#CONFIG_I2C_DEBUG_COREis not setCONFIG_I2C_DEBUG_ALGO=y
#CONFIG_I2C_DEBUG_BUSis not setCONFIG_I2C_DEBUG_CHIP=y
#CONFIG_SPIis not set#
# PPS support
#
#CONFIG_PPSis not setCONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
#CONFIG_GPIOLIBis not set
#CONFIG_W1is not setCONFIG_POWER_SUPPLY=y
#CONFIG_POWER_SUPPLY_DEBUGis not set
#CONFIG_PDA_POWERis not set
#CONFIG_BATTERY_DS2760is not set
#CONFIG_BATTERY_DS2782is not set
#CONFIG_BATTERY_BQ27x00is not set
#CONFIG_BATTERY_MAX17040is not setCONFIG_HWMON=y
#CONFIG_HWMON_VIDis not set
#CONFIG_SENSORS_ABITUGURUis not set
#CONFIG_SENSORS_ABITUGURU3is not set
#CONFIG_SENSORS_AD7414is not set
#CONFIG_SENSORS_AD7418is not set
#CONFIG_SENSORS_ADM1021is not set
#CONFIG_SENSORS_ADM1025is not set
#CONFIG_SENSORS_ADM1026is not set
#CONFIG_SENSORS_ADM1029is not set
#CONFIG_SENSORS_ADM1031is not set
#CONFIG_SENSORS_ADM9240is not set
#CONFIG_SENSORS_ADT7462is not set
#CONFIG_SENSORS_ADT7470is not set
#CONFIG_SENSORS_ADT7473is not set
#CONFIG_SENSORS_ADT7475is not set
#CONFIG_SENSORS_K8TEMPis not set
#CONFIG_SENSORS_ASB100is not set
#CONFIG_SENSORS_ATK0110is not set
#CONFIG_SENSORS_ATXP1is not set
#CONFIG_SENSORS_DS1621is not set
#CONFIG_SENSORS_I5K_AMBis not set
#CONFIG_SENSORS_F71805Fis not set
#CONFIG_SENSORS_F71882FGis not set
#CONFIG_SENSORS_F75375Sis not set
#CONFIG_SENSORS_FSCHERis not set
#CONFIG_SENSORS_FSCPOSis not set
#CONFIG_SENSORS_FSCHMDis not set
#CONFIG_SENSORS_G760Ais not set
#CONFIG_SENSORS_GL518SMis not set
#CONFIG_SENSORS_GL520SMis not set
#CONFIG_SENSORS_CORETEMPis not set
#CONFIG_SENSORS_IT87is not set
#CONFIG_SENSORS_LM63is not set
#CONFIG_SENSORS_LM75is not set
#CONFIG_SENSORS_LM77is not set
#CONFIG_SENSORS_LM78is not set
#CONFIG_SENSORS_LM80is not set
#CONFIG_SENSORS_LM83is not set
#CONFIG_SENSORS_LM85is not set
#CONFIG_SENSORS_LM87is not set
#CONFIG_SENSORS_LM90is not set
#CONFIG_SENSORS_LM92is not set
#CONFIG_SENSORS_LM93is not set
#CONFIG_SENSORS_LTC4215is not set
#CONFIG_SENSORS_LTC4245is not set
#CONFIG_SENSORS_LM95241is not set
#CONFIG_SENSORS_MAX1619is not set
#CONFIG_SENSORS_MAX6650is not set
#CONFIG_SENSORS_PC87360is not set
#CONFIG_SENSORS_PC87427is not set
#CONFIG_SENSORS_PCF8591is not set
#CONFIG_SENSORS_SIS5595is not set
#CONFIG_SENSORS_DME1737is not set
#CONFIG_SENSORS_SMSC47M1is not set
#CONFIG_SENSORS_SMSC47M192is not set
#CONFIG_SENSORS_SMSC47B397is not set
#CONFIG_SENSORS_ADS7828is not set
#CONFIG_SENSORS_THMC50is not set
#CONFIG_SENSORS_TMP401is not set
#CONFIG_SENSORS_VIA686Ais not set
#CONFIG_SENSORS_VT1211is not set
#CONFIG_SENSORS_VT8231is not set
#CONFIG_SENSORS_W83781Dis not set
#CONFIG_SENSORS_W83791Dis not set
#CONFIG_SENSORS_W83792Dis not set
#CONFIG_SENSORS_W83793is not set
#CONFIG_SENSORS_W83L785TSis not set
#CONFIG_SENSORS_W83L786NGis not set
#CONFIG_SENSORS_W83627HFis not set
#CONFIG_SENSORS_W83627EHFis not setCONFIG_SENSORS_HDAPS=y
#CONFIG_SENSORS_LIS3LV02Dis not set
#CONFIG_SENSORS_APPLESMCis not set
#CONFIG_HWMON_DEBUG_CHIPis not setCONFIG_THERMAL=y
#CONFIG_THERMAL_HWMONis not setCONFIG_WATCHDOG=y
#CONFIG_WATCHDOG_NOWAYOUTis not set#
# Watchdog Device Drivers
#CONFIG_SOFT_WATCHDOG=m
#CONFIG_ACQUIRE_WDTis not set
#CONFIG_ADVANTECH_WDTis not set
#CONFIG_ALIM1535_WDTis not set
#CONFIG_ALIM7101_WDTis not set
#CONFIG_SC520_WDTis not set
#CONFIG_EUROTECH_WDTis not set
#CONFIG_IB700_WDTis not set
#CONFIG_IBMASRis not set
#CONFIG_WAFER_WDTis not set
#CONFIG_I6300ESB_WDTis not setCONFIG_ITCO_WDT=mCONFIG_ITCO_VENDOR_SUPPORT=y
#CONFIG_IT8712F_WDTis not set
#CONFIG_IT87_WDTis not set
#CONFIG_HP_WATCHDOGis not set
#CONFIG_SC1200_WDTis not set
#CONFIG_PC87413_WDTis not set
#CONFIG_60XX_WDTis not set
#CONFIG_SBC8360_WDTis not set
#CONFIG_CPU5_WDTis not set
#CONFIG_SMSC_SCH311X_WDTis not set
#CONFIG_SMSC37B787_WDTis not set
#CONFIG_W83627HF_WDTis not set
#CONFIG_W83697HF_WDTis not set
#CONFIG_W83697UG_WDTis not set
#CONFIG_W83877F_WDTis not set
#CONFIG_W83977F_WDTis not set
#CONFIG_MACHZ_WDTis not set
#CONFIG_SBC_EPX_C3_WATCHDOGis not set#
# PCI-based Watchdog Cards
#
#CONFIG_PCIPCWATCHDOGis not set
#CONFIG_WDTPCIis not set#
# USB-based Watchdog Cards
#
#CONFIG_USBPCWATCHDOGis not setCONFIG_SSB_POSSIBLE=y#
# Sonics Silicon Backplane
#
#CONFIG_SSBis not set#
# Multifunction device drivers
#
#CONFIG_MFD_COREis not set
#CONFIG_MFD_SM501is not set
#CONFIG_HTC_PASIC3is not set
#CONFIG_MFD_TMIOis not set
#CONFIG_MFD_WM8400is not set
#CONFIG_MFD_WM8350_I2Cis not set
#CONFIG_MFD_PCF50633is not set
#CONFIG_AB3100_COREis not setCONFIG_REGULATOR=yCONFIG_REGULATOR_DEBUG=y
#CONFIG_REGULATOR_FIXED_VOLTAGEis not setCONFIG_REGULATOR_VIRTUAL_CONSUMER=m
#CONFIG_REGULATOR_USERSPACE_CONSUMERis not set
#CONFIG_REGULATOR_BQ24022is not set
#CONFIG_REGULATOR_MAX1586is not set
#CONFIG_REGULATOR_LP3971is not setCONFIG_MEDIA_SUPPORT=m#
# Multimedia core support
#CONFIG_VIDEO_DEV=mCONFIG_VIDEO_V4L2_COMMON=mCONFIG_VIDEO_ALLOW_V4L1=yCONFIG_VIDEO_V4L1_COMPAT=yCONFIG_DVB_CORE=mCONFIG_VIDEO_MEDIA=m#
# Multimedia drivers
#CONFIG_MEDIA_ATTACH=yCONFIG_MEDIA_TUNER=mCONFIG_MEDIA_TUNER_CUSTOMISE=yCONFIG_MEDIA_TUNER_SIMPLE=m
#CONFIG_MEDIA_TUNER_TDA8290is not set
#CONFIG_MEDIA_TUNER_TDA827Xis not set
#CONFIG_MEDIA_TUNER_TDA18271is not setCONFIG_MEDIA_TUNER_TDA9887=m
#CONFIG_MEDIA_TUNER_TEA5761is not set
#CONFIG_MEDIA_TUNER_TEA5767is not set
#CONFIG_MEDIA_TUNER_MT20XXis not set
#CONFIG_MEDIA_TUNER_MT2060is not setCONFIG_MEDIA_TUNER_MT2266=m
#CONFIG_MEDIA_TUNER_MT2131is not set
#CONFIG_MEDIA_TUNER_QT1010is not set
#CONFIG_MEDIA_TUNER_XC2028is not set
#CONFIG_MEDIA_TUNER_XC5000is not set
#CONFIG_MEDIA_TUNER_MXL5005Sis not set
#CONFIG_MEDIA_TUNER_MXL5007Tis not set
#CONFIG_MEDIA_TUNER_MC44S803is not setCONFIG_VIDEO_V4L2=mCONFIG_VIDEO_V4L1=mCONFIG_VIDEOBUF_GEN=mCONFIG_VIDEOBUF_DMA_SG=mCONFIG_VIDEOBUF_VMALLOC=mCONFIG_VIDEO_IR=mCONFIG_VIDEO_TVEEPROM=mCONFIG_VIDEO_TUNER=mCONFIG_VIDEO_CAPTURE_DRIVERS=yCONFIG_VIDEO_ADV_DEBUG=y
#CONFIG_VIDEO_FIXED_MINOR_RANGESis not setCONFIG_VIDEO_HELPER_CHIPS_AUTO=yCONFIG_VIDEO_IR_I2C=mCONFIG_VIDEO_SAA6588=mCONFIG_VIDEO_VIVI=m
#CONFIG_VIDEO_BT848is not set
#CONFIG_VIDEO_CPIAis not set
#CONFIG_VIDEO_CPIA2is not set
#CONFIG_VIDEO_SAA5246Ais not set
#CONFIG_VIDEO_SAA5249is not set
#CONFIG_VIDEO_STRADISis not set
#CONFIG_VIDEO_ZORANis not setCONFIG_VIDEO_SAA7134=mCONFIG_VIDEO_SAA7134_ALSA=m
#CONFIG_VIDEO_SAA7134_DVBis not set
#CONFIG_VIDEO_MXBis not set
#CONFIG_VIDEO_HEXIUM_ORIONis not set
#CONFIG_VIDEO_HEXIUM_GEMINIis not set
#CONFIG_VIDEO_CX88is not set
#CONFIG_VIDEO_CX23885is not set
#CONFIG_VIDEO_AU0828is not set
#CONFIG_VIDEO_IVTVis not set
#CONFIG_VIDEO_CX18is not set
#CONFIG_VIDEO_CAFE_CCICis not set
#CONFIG_SOC_CAMERAis not setCONFIG_V4L_USB_DRIVERS=y
#CONFIG_USB_VIDEO_CLASSis not setCONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
#CONFIG_USB_GSPCAis not set
#CONFIG_VIDEO_PVRUSB2is not set
#CONFIG_VIDEO_HDPVRis not set
#CONFIG_VIDEO_EM28XXis not set
#CONFIG_VIDEO_CX231XXis not set
#CONFIG_VIDEO_USBVISIONis not set
#CONFIG_USB_VICAMis not set
#CONFIG_USB_IBMCAMis not set
#CONFIG_USB_KONICAWCis not set
#CONFIG_USB_QUICKCAM_MESSENGERis not set
#CONFIG_USB_ET61X251is not set
#CONFIG_VIDEO_OVCAMCHIPis not set
#CONFIG_USB_OV511is not set
#CONFIG_USB_SE401is not set
#CONFIG_USB_SN9C102is not set
#CONFIG_USB_STV680is not set
#CONFIG_USB_ZC0301is not set
#CONFIG_USB_PWCis not set
#CONFIG_USB_PWC_INPUT_EVDEVis not set
#CONFIG_USB_ZR364XXis not set
#CONFIG_USB_STKWEBCAMis not set
#CONFIG_USB_S2255is not setCONFIG_RADIO_ADAPTERS=y
#CONFIG_RADIO_GEMTEK_PCIis not set
#CONFIG_RADIO_MAXIRADIOis not set
#CONFIG_RADIO_MAESTROis not set
#CONFIG_USB_DSBRis not set
#CONFIG_USB_SI470Xis not set
#CONFIG_USB_MR800is not set
#CONFIG_RADIO_TEA5764is not setCONFIG_DVB_DYNAMIC_MINORS=yCONFIG_DVB_CAPTURE_DRIVERS=y#
# Supported SAA7146 based PCI Adapters
#
#CONFIG_TTPCI_EEPROMis not set
#CONFIG_DVB_AV7110is not set
#CONFIG_DVB_BUDGET_COREis not set#
# Supported USB Adapters
#CONFIG_DVB_USB=mCONFIG_DVB_USB_DEBUG=y
#CONFIG_DVB_USB_A800is not set
#CONFIG_DVB_USB_DIBUSB_MBis not set
#CONFIG_DVB_USB_DIBUSB_MCis not setCONFIG_DVB_USB_DIB0700=m
#CONFIG_DVB_USB_UMT_010is not set
#CONFIG_DVB_USB_CXUSBis not set
#CONFIG_DVB_USB_M920Xis not set
#CONFIG_DVB_USB_GL861is not set
#CONFIG_DVB_USB_AU6610is not set
#CONFIG_DVB_USB_DIGITVis not set
#CONFIG_DVB_USB_VP7045is not set
#CONFIG_DVB_USB_VP702Xis not set
#CONFIG_DVB_USB_GP8PSKis not setCONFIG_DVB_USB_NOVA_T_USB2=m
#CONFIG_DVB_USB_TTUSB2is not set
#CONFIG_DVB_USB_DTT200Uis not set
#CONFIG_DVB_USB_OPERA1is not set
#CONFIG_DVB_USB_AF9005is not set
#CONFIG_DVB_USB_DW2102is not set
#CONFIG_DVB_USB_CINERGY_T2is not set
#CONFIG_DVB_USB_ANYSEEis not set
#CONFIG_DVB_USB_DTV5100is not setCONFIG_DVB_USB_AF9015=m
#CONFIG_DVB_USB_CE6230is not set
#CONFIG_DVB_TTUSB_BUDGETis not set
#CONFIG_DVB_TTUSB_DECis not set
#CONFIG_DVB_SIANO_SMS1XXXis not set#
# Supported FlexCopII (B2C2) Adapters
#
#CONFIG_DVB_B2C2_FLEXCOPis not set#
# Supported BT878 Adapters
##
# Supported Pluto2 Adapters
#
#CONFIG_DVB_PLUTO2is not set#
# Supported SDMC DM1105 Adapters
#
#CONFIG_DVB_DM1105is not set#
# Supported DVB Frontends
#CONFIG_DVB_FE_CUSTOMISE=y#
# Customise DVB Frontends
##
# Multistandard (satellite) frontends
#
#CONFIG_DVB_STB0899is not set
#CONFIG_DVB_STB6100is not set
#CONFIG_DVB_STV090xis not set
#CONFIG_DVB_STV6110xis not set#
# DVB-S (satellite) frontends
#
#CONFIG_DVB_CX24110is not set
#CONFIG_DVB_CX24123is not set
#CONFIG_DVB_MT312is not set
#CONFIG_DVB_ZL10036is not set
#CONFIG_DVB_S5H1420is not set
#CONFIG_DVB_STV0288is not set
#CONFIG_DVB_STB6000is not set
#CONFIG_DVB_STV0299is not set
#CONFIG_DVB_STV6110is not set
#CONFIG_DVB_STV0900is not set
#CONFIG_DVB_TDA8083is not set
#CONFIG_DVB_TDA10086is not setCONFIG_DVB_TDA8261=m
#CONFIG_DVB_VES1X93is not set
#CONFIG_DVB_TUNER_ITD1000is not set
#CONFIG_DVB_TUNER_CX24113is not set
#CONFIG_DVB_TDA826Xis not set
#CONFIG_DVB_TUA6100is not set
#CONFIG_DVB_CX24116is not setCONFIG_DVB_SI21XX=m#
# DVB-T (terrestrial) frontends
#
#CONFIG_DVB_SP8870is not set
#CONFIG_DVB_SP887Xis not set
#CONFIG_DVB_CX22700is not set
#CONFIG_DVB_CX22702is not set
#CONFIG_DVB_DRX397XDis not set
#CONFIG_DVB_L64781is not set
#CONFIG_DVB_TDA1004Xis not set
#CONFIG_DVB_NXT6000is not set
#CONFIG_DVB_MT352is not set
#CONFIG_DVB_ZL10353is not set
#CONFIG_DVB_DIB3000MBis not setCONFIG_DVB_DIB3000MC=mCONFIG_DVB_DIB7000M=mCONFIG_DVB_DIB7000P=m
#CONFIG_DVB_TDA10048is not setCONFIG_DVB_AF9013=m#
# DVB-C (cable) frontends
#
#CONFIG_DVB_VES1820is not set
#CONFIG_DVB_TDA10021is not set
#CONFIG_DVB_TDA10023is not set
#CONFIG_DVB_STV0297is not set#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends #
#CONFIG_DVB_NXT200Xis not set
#CONFIG_DVB_OR51211is not set
#CONFIG_DVB_OR51132is not set
#CONFIG_DVB_BCM3510is not set
#CONFIG_DVB_LGDT330Xis not set
#CONFIG_DVB_LGDT3304is not set
#CONFIG_DVB_LGDT3305is not set
#CONFIG_DVB_S5H1409is not set
#CONFIG_DVB_AU8522is not set
#CONFIG_DVB_S5H1411is not set#
# ISDB-T (terrestrial) frontends
#
#CONFIG_DVB_S921is not set#
# Digital terrestrial only tuners/PLL
#CONFIG_DVB_PLL=mCONFIG_DVB_TUNER_DIB0070=m#
# SEC control devices for DVB-S
#
#CONFIG_DVB_LNBP21is not set
#CONFIG_DVB_ISL6405is not set
#CONFIG_DVB_ISL6421is not set
#CONFIG_DVB_ISL6423is not set
#CONFIG_DVB_LGS8GL5is not set
#CONFIG_DVB_LGS8GXXis not set#
# Tools to develop new frontends
#CONFIG_DVB_DUMMY_FE=m
#CONFIG_DABis not set#
# Graphics support
#CONFIG_AGP=yCONFIG_AGP_AMD64=yCONFIG_AGP_INTEL=m
#CONFIG_AGP_SISis not set
#CONFIG_AGP_VIAis not setCONFIG_DRM=m
#CONFIG_DRM_TDFXis not set
#CONFIG_DRM_R128is not set
#CONFIG_DRM_RADEONis not set
#CONFIG_DRM_I810is not set
#CONFIG_DRM_I830is not setCONFIG_DRM_I915=m
#CONFIG_DRM_I915_KMSis not setCONFIG_DRM_MGA=m
#CONFIG_DRM_SISis not set
#CONFIG_DRM_VIAis not set
#CONFIG_DRM_SAVAGEis not set
#CONFIG_VGASTATEis not setCONFIG_VIDEO_OUTPUT_CONTROL=mCONFIG_FB=yCONFIG_FIRMWARE_EDID=yCONFIG_FB_DDC=mCONFIG_FB_BOOT_VESA_SUPPORT=yCONFIG_FB_CFB_FILLRECT=yCONFIG_FB_CFB_COPYAREA=yCONFIG_FB_CFB_IMAGEBLIT=y
#CONFIG_FB_CFB_REV_PIXELS_IN_BYTEis not set
#CONFIG_FB_SYS_FILLRECTis not set
#CONFIG_FB_SYS_COPYAREAis not set
#CONFIG_FB_SYS_IMAGEBLITis not set
#CONFIG_FB_FOREIGN_ENDIANis not set
#CONFIG_FB_SYS_FOPSis not set
#CONFIG_FB_SVGALIBis not set
#CONFIG_FB_MACMODESis not set
#CONFIG_FB_BACKLIGHTis not setCONFIG_FB_MODE_HELPERS=yCONFIG_FB_TILEBLITTING=y#
# Frame buffer hardware drivers
#
#CONFIG_FB_CIRRUSis not set
#CONFIG_FB_PM2is not set
#CONFIG_FB_CYBER2000is not set
#CONFIG_FB_ARCis not set
#CONFIG_FB_ASILIANTis not set
#CONFIG_FB_IMSTTis not set
#CONFIG_FB_VGA16is not set
#CONFIG_FB_UVESAis not setCONFIG_FB_VESA=yCONFIG_FB_EFI=y
#CONFIG_FB_N411is not set
#CONFIG_FB_HGAis not set
#CONFIG_FB_S1D13XXXis not set
#CONFIG_FB_NVIDIAis not set
#CONFIG_FB_RIVAis not set
#CONFIG_FB_LE80578is not setCONFIG_FB_INTEL=m
#CONFIG_FB_INTEL_DEBUGis not setCONFIG_FB_INTEL_I2C=y
#CONFIG_FB_MATROXis not set
#CONFIG_FB_RADEONis not set
#CONFIG_FB_ATY128is not set
#CONFIG_FB_ATYis not set
#CONFIG_FB_S3is not set
#CONFIG_FB_SAVAGEis not set
#CONFIG_FB_SISis not set
#CONFIG_FB_VIAis not set
#CONFIG_FB_NEOMAGICis not set
#CONFIG_FB_KYROis not set
#CONFIG_FB_3DFXis not set
#CONFIG_FB_VOODOO1is not set
#CONFIG_FB_VT8623is not set
#CONFIG_FB_TRIDENTis not set
#CONFIG_FB_ARKis not set
#CONFIG_FB_PM3is not set
#CONFIG_FB_CARMINEis not set
#CONFIG_FB_GEODEis not set
#CONFIG_FB_VIRTUALis not set
#CONFIG_FB_METRONOMEis not set
#CONFIG_FB_MB862XXis not set
#CONFIG_FB_BROADSHEETis not setCONFIG_BACKLIGHT_LCD_SUPPORT=yCONFIG_LCD_CLASS_DEVICE=m
#CONFIG_LCD_ILI9320is not setCONFIG_LCD_PLATFORM=mCONFIG_BACKLIGHT_CLASS_DEVICE=mCONFIG_BACKLIGHT_GENERIC=m
#CONFIG_BACKLIGHT_PROGEARis not set
#CONFIG_BACKLIGHT_MBP_NVIDIAis not set
#CONFIG_BACKLIGHT_SAHARAis not set#
# Display device support
#CONFIG_DISPLAY_SUPPORT=m#
# Display hardware drivers
##
# Console display driver support
#CONFIG_VGA_CONSOLE=y
#CONFIG_VGACON_SOFT_SCROLLBACKis not setCONFIG_DUMMY_CONSOLE=yCONFIG_FRAMEBUFFER_CONSOLE=y
#CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARYis not set #CONFIG_FRAMEBUFFER_CONSOLE_ROTATIONis not set #CONFIG_FONTSis not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=yCONFIG_LOGO=yCONFIG_LOGO_LINUX_MONO=yCONFIG_LOGO_LINUX_VGA16=yCONFIG_LOGO_LINUX_CLUT224=yCONFIG_SOUND=mCONFIG_SOUND_OSS_CORE=yCONFIG_SND=mCONFIG_SND_TIMER=mCONFIG_SND_PCM=mCONFIG_SND_HWDEP=mCONFIG_SND_RAWMIDI=mCONFIG_SND_JACK=yCONFIG_SND_SEQUENCER=m
#CONFIG_SND_SEQ_DUMMYis not setCONFIG_SND_OSSEMUL=yCONFIG_SND_MIXER_OSS=mCONFIG_SND_PCM_OSS=mCONFIG_SND_PCM_OSS_PLUGINS=yCONFIG_SND_SEQUENCER_OSS=yCONFIG_SND_HRTIMER=mCONFIG_SND_SEQ_HRTIMER_DEFAULT=yCONFIG_SND_DYNAMIC_MINORS=y
#CONFIG_SND_SUPPORT_OLD_APIis not setCONFIG_SND_VERBOSE_PROCFS=y
#CONFIG_SND_VERBOSE_PRINTKis not set
#CONFIG_SND_DEBUGis not setCONFIG_SND_VMASTER=yCONFIG_SND_RAWMIDI_SEQ=m
#CONFIG_SND_OPL3_LIB_SEQis not set
#CONFIG_SND_OPL4_LIB_SEQis not set
#CONFIG_SND_SBAWE_SEQis not setCONFIG_SND_EMU10K1_SEQ=mCONFIG_SND_MPU401_UART=mCONFIG_SND_AC97_CODEC=mCONFIG_SND_DRIVERS=yCONFIG_SND_DUMMY=m
#CONFIG_SND_VIRMIDIis not set
#CONFIG_SND_MTPAVis not setCONFIG_SND_SERIAL_U16550=mCONFIG_SND_MPU401=mCONFIG_SND_AC97_POWER_SAVE=yCONFIG_SND_AC97_POWER_SAVE_DEFAULT=500CONFIG_SND_PCI=y
#CONFIG_SND_AD1889is not set
#CONFIG_SND_ALS300is not set
#CONFIG_SND_ALS4000is not set
#CONFIG_SND_ALI5451is not set
#CONFIG_SND_ATIIXPis not set
#CONFIG_SND_ATIIXP_MODEMis not set
#CONFIG_SND_AU8810is not set
#CONFIG_SND_AU8820is not set
#CONFIG_SND_AU8830is not set
#CONFIG_SND_AW2is not set
#CONFIG_SND_AZT3328is not set
#CONFIG_SND_BT87Xis not set
#CONFIG_SND_CA0106is not set
#CONFIG_SND_CMIPCIis not set
#CONFIG_SND_OXYGENis not set
#CONFIG_SND_CS4281is not set
#CONFIG_SND_CS46XXis not set
#CONFIG_SND_CS5530is not set
#CONFIG_SND_CTXFIis not set
#CONFIG_SND_DARLA20is not set
#CONFIG_SND_GINA20is not set
#CONFIG_SND_LAYLA20is not set
#CONFIG_SND_DARLA24is not set
#CONFIG_SND_GINA24is not set
#CONFIG_SND_LAYLA24is not set
#CONFIG_SND_MONAis not set
#CONFIG_SND_MIAis not set
#CONFIG_SND_ECHO3Gis not set
#CONFIG_SND_INDIGOis not set
#CONFIG_SND_INDIGOIOis not set
#CONFIG_SND_INDIGODJis not set
#CONFIG_SND_INDIGOIOXis not set
#CONFIG_SND_INDIGODJXis not setCONFIG_SND_EMU10K1=m
#CONFIG_SND_EMU10K1Xis not setCONFIG_SND_ENS1370=mCONFIG_SND_ENS1371=m
#CONFIG_SND_ES1938is not set
#CONFIG_SND_ES1968is not set
#CONFIG_SND_FM801is not setCONFIG_SND_HDA_INTEL=m
#CONFIG_SND_HDA_HWDEPis not set
#CONFIG_SND_HDA_INPUT_BEEPis not setCONFIG_SND_HDA_INPUT_JACK=yCONFIG_SND_HDA_CODEC_REALTEK=yCONFIG_SND_HDA_CODEC_ANALOG=yCONFIG_SND_HDA_CODEC_SIGMATEL=yCONFIG_SND_HDA_CODEC_VIA=yCONFIG_SND_HDA_CODEC_ATIHDMI=y
#CONFIG_SND_HDA_CODEC_NVHDMIis not setCONFIG_SND_HDA_CODEC_INTELHDMI=yCONFIG_SND_HDA_ELD=yCONFIG_SND_HDA_CODEC_CONEXANT=y
#CONFIG_SND_HDA_CODEC_CA0110is not setCONFIG_SND_HDA_CODEC_CMEDIA=yCONFIG_SND_HDA_CODEC_SI3054=yCONFIG_SND_HDA_GENERIC=yCONFIG_SND_HDA_POWER_SAVE=yCONFIG_SND_HDA_POWER_SAVE_DEFAULT=500
#CONFIG_SND_HDSPis not set
#CONFIG_SND_HDSPMis not set
#CONFIG_SND_HIFIERis not set
#CONFIG_SND_ICE1712is not set
#CONFIG_SND_ICE1724is not setCONFIG_SND_INTEL8X0=m
#CONFIG_SND_INTEL8X0Mis not set
#CONFIG_SND_KORG1212is not set
#CONFIG_SND_LX6464ESis not set
#CONFIG_SND_MAESTRO3is not set
#CONFIG_SND_MIXARTis not set
#CONFIG_SND_NM256is not set
#CONFIG_SND_PCXHRis not set
#CONFIG_SND_RIPTIDEis not set
#CONFIG_SND_RME32is not set
#CONFIG_SND_RME96is not set
#CONFIG_SND_RME9652is not set
#CONFIG_SND_SONICVIBESis not set
#CONFIG_SND_TRIDENTis not set
#CONFIG_SND_VIA82XXis not set
#CONFIG_SND_VIA82XX_MODEMis not set
#CONFIG_SND_VIRTUOSOis not set
#CONFIG_SND_VX222is not set
#CONFIG_SND_YMFPCIis not set
#CONFIG_SND_USBis not set
#CONFIG_SND_PCMCIAis not set
#CONFIG_SND_SOCis not set
#CONFIG_SOUND_PRIMEis not setCONFIG_AC97_BUS=mCONFIG_HID_SUPPORT=yCONFIG_HID=m
#CONFIG_HID_DEBUGis not set
#CONFIG_HIDRAWis not set#
# USB Input Devices
#CONFIG_USB_HID=m
#CONFIG_HID_PIDis not setCONFIG_USB_HIDDEV=y#
# USB HID Boot Protocol drivers
#
#CONFIG_USB_KBDis not set
#CONFIG_USB_MOUSEis not set#
# Special HID drivers
#
#CONFIG_HID_A4TECHis not set
#CONFIG_HID_APPLEis not set
#CONFIG_HID_BELKINis not set
#CONFIG_HID_CHERRYis not set
#CONFIG_HID_CHICONYis not set
#CONFIG_HID_CYPRESSis not set
#CONFIG_HID_DRAGONRISEis not set
#CONFIG_HID_EZKEYis not set
#CONFIG_HID_KYEis not set
#CONFIG_HID_GYRATIONis not set
#CONFIG_HID_KENSINGTONis not set
#CONFIG_HID_LOGITECHis not set
#CONFIG_HID_MICROSOFTis not set
#CONFIG_HID_MONTEREYis not set
#CONFIG_HID_NTRIGis not set
#CONFIG_HID_PANTHERLORDis not set
#CONFIG_HID_PETALYNXis not set
#CONFIG_HID_SAMSUNGis not set
#CONFIG_HID_SONYis not set
#CONFIG_HID_SUNPLUSis not set
#CONFIG_HID_GREENASIAis not set
#CONFIG_HID_SMARTJOYPLUSis not set
#CONFIG_HID_TOPSEEDis not set
#CONFIG_HID_THRUSTMASTERis not set
#CONFIG_HID_WACOMis not set
#CONFIG_HID_ZEROPLUSis not setCONFIG_USB_SUPPORT=yCONFIG_USB_ARCH_HAS_HCD=yCONFIG_USB_ARCH_HAS_OHCI=yCONFIG_USB_ARCH_HAS_EHCI=yCONFIG_USB=m
#CONFIG_USB_DEBUGis not setCONFIG_USB_ANNOUNCE_NEW_DEVICES=y#
# Miscellaneous USB options
#CONFIG_USB_DEVICEFS=yCONFIG_USB_DEVICE_CLASS=y
#CONFIG_USB_DYNAMIC_MINORSis not setCONFIG_USB_SUSPEND=y
#CONFIG_USB_OTGis not set
#CONFIG_USB_OTG_WHITELISTis not set
#CONFIG_USB_OTG_BLACKLIST_HUBis not setCONFIG_USB_MON=m
#CONFIG_USB_WUSBis not set
#CONFIG_USB_WUSB_CBAFis not set#
# USB Host Controller Drivers
#
#CONFIG_USB_C67X00_HCDis not set
#CONFIG_USB_XHCI_HCDis not setCONFIG_USB_EHCI_HCD=mCONFIG_USB_EHCI_ROOT_HUB_TT=yCONFIG_USB_EHCI_TT_NEWSCHED=y
#CONFIG_USB_OXU210HP_HCDis not set
#CONFIG_USB_ISP116X_HCDis not set
#CONFIG_USB_ISP1760_HCDis not setCONFIG_USB_OHCI_HCD=m
#CONFIG_USB_OHCI_BIG_ENDIAN_DESCis not set
#CONFIG_USB_OHCI_BIG_ENDIAN_MMIOis not setCONFIG_USB_OHCI_LITTLE_ENDIAN=yCONFIG_USB_UHCI_HCD=m
#CONFIG_USB_SL811_HCDis not set
#CONFIG_USB_R8A66597_HCDis not set
#CONFIG_USB_WHCI_HCDis not set
#CONFIG_USB_HWA_HCDis not set#
# Enable Host or Gadget support to see Inventra options ##
# USB Device Class drivers
#
#CONFIG_USB_ACMis not setCONFIG_USB_PRINTER=m
#CONFIG_USB_WDMis not setCONFIG_USB_TMC=m#
# NOTE:USB_STORAGEdepends on SCSI butBLK_DEV_SDmay ##
# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set#
# USB Imaging devices
#
#CONFIG_USB_MDC800is not set
#CONFIG_USB_MICROTEKis not set#
# USB port drivers
#
#CONFIG_USB_SERIALis not set#
# USB Miscellaneous drivers
#
#CONFIG_USB_EMI62is not set
#CONFIG_USB_EMI26is not set
#CONFIG_USB_ADUTUXis not set
#CONFIG_USB_SEVSEGis not set
#CONFIG_USB_RIO500is not set
#CONFIG_USB_LEGOTOWERis not set
#CONFIG_USB_LCDis not set
#CONFIG_USB_BERRY_CHARGEis not set
#CONFIG_USB_LEDis not set
#CONFIG_USB_CYPRESS_CY7C63is not set
#CONFIG_USB_CYTHERMis not set
#CONFIG_USB_IDMOUSEis not set
#CONFIG_USB_FTDI_ELANis not set
#CONFIG_USB_APPLEDISPLAYis not set
#CONFIG_USB_SISUSBVGAis not set
#CONFIG_USB_LDis not set
#CONFIG_USB_TRANCEVIBRATORis not set
#CONFIG_USB_IOWARRIORis not setCONFIG_USB_TEST=m
#CONFIG_USB_ISIGHTFWis not set
#CONFIG_USB_VSTis not set
#CONFIG_USB_GADGETis not set#
# OTG and related infrastructure
#
#CONFIG_NOP_USB_XCEIVis not set
#CONFIG_UWBis not setCONFIG_MMC=m
#CONFIG_MMC_DEBUGis not set
#CONFIG_MMC_UNSAFE_RESUMEis not set#
# MMC/SD/SDIO Card Drivers
#CONFIG_MMC_BLOCK=mCONFIG_MMC_BLOCK_BOUNCE=y
#CONFIG_SDIO_UARTis not set
#CONFIG_MMC_TESTis not set#
# MMC/SD/SDIO Host Controller Drivers
#CONFIG_MMC_SDHCI=mCONFIG_MMC_SDHCI_PCI=m
#CONFIG_MMC_RICOH_MMCis not setCONFIG_MMC_SDHCI_PLTFM=m
#CONFIG_MMC_WBSDis not set
#CONFIG_MMC_TIFM_SDis not setCONFIG_MMC_SDRICOH_CS=m
#CONFIG_MMC_CB710is not set
#CONFIG_MMC_VIA_SDMMCis not set
#CONFIG_MEMSTICKis not setCONFIG_NEW_LEDS=yCONFIG_LEDS_CLASS=m#
# LED drivers
#
#CONFIG_LEDS_ALIX2is not set
#CONFIG_LEDS_PCA9532is not set
#CONFIG_LEDS_LP3944is not set
#CONFIG_LEDS_CLEVO_MAILis not set
#CONFIG_LEDS_PCA955Xis not set
#CONFIG_LEDS_BD2802is not set#
# LED Triggers
#CONFIG_LEDS_TRIGGERS=yCONFIG_LEDS_TRIGGER_TIMER=mCONFIG_LEDS_TRIGGER_HEARTBEAT=m
#CONFIG_LEDS_TRIGGER_BACKLIGHTis not set
#CONFIG_LEDS_TRIGGER_DEFAULT_ONis not set#
# iptables trigger is under Netfilter config (LED target) # # CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set CONFIG_RTC_LIB=m CONFIG_RTC_CLASS=m#
# RTC interfaces
#CONFIG_RTC_INTF_SYSFS=yCONFIG_RTC_INTF_PROC=yCONFIG_RTC_INTF_DEV=y
#CONFIG_RTC_INTF_DEV_UIE_EMULis not set
#CONFIG_RTC_DRV_TESTis not set#
# I2C RTC drivers
#
#CONFIG_RTC_DRV_DS1307is not set
#CONFIG_RTC_DRV_DS1374is not set
#CONFIG_RTC_DRV_DS1672is not set
#CONFIG_RTC_DRV_MAX6900is not set
#CONFIG_RTC_DRV_RS5C372is not set
#CONFIG_RTC_DRV_ISL1208is not set
#CONFIG_RTC_DRV_X1205is not set
#CONFIG_RTC_DRV_PCF8563is not set
#CONFIG_RTC_DRV_PCF8583is not set
#CONFIG_RTC_DRV_M41T80is not set
#CONFIG_RTC_DRV_S35390Ais not set
#CONFIG_RTC_DRV_FM3130is not set
#CONFIG_RTC_DRV_RX8581is not set
#CONFIG_RTC_DRV_RX8025is not set#
# SPI RTC drivers
##
# Platform RTC drivers
#CONFIG_RTC_DRV_CMOS=m
#CONFIG_RTC_DRV_DS1286is not set
#CONFIG_RTC_DRV_DS1511is not set
#CONFIG_RTC_DRV_DS1553is not set
#CONFIG_RTC_DRV_DS1742is not set
#CONFIG_RTC_DRV_STK17TA8is not set
#CONFIG_RTC_DRV_M48T86is not set
#CONFIG_RTC_DRV_M48T35is not set
#CONFIG_RTC_DRV_M48T59is not set
#CONFIG_RTC_DRV_BQ4802is not set
#CONFIG_RTC_DRV_V3020is not set#
# on-CPU RTC drivers
#CONFIG_DMADEVICES=y#
# DMA Devices
#CONFIG_INTEL_IOATDMA=mCONFIG_DMA_ENGINE=y#
# DMA Clients
#CONFIG_NET_DMA=y
#CONFIG_ASYNC_TX_DMAis not set
#CONFIG_DMATESTis not setCONFIG_DCA=m
#CONFIG_AUXDISPLAYis not set
#CONFIG_UIOis not set#
# TI VLYNQ
#
#CONFIG_STAGINGis not setCONFIG_X86_PLATFORM_DEVICES=y
#CONFIG_ACER_WMIis not set
#CONFIG_ASUS_LAPTOPis not set
#CONFIG_FUJITSU_LAPTOPis not set
#CONFIG_MSI_LAPTOPis not set
#CONFIG_PANASONIC_LAPTOPis not set
#CONFIG_COMPAL_LAPTOPis not set
#CONFIG_SONY_LAPTOPis not setCONFIG_THINKPAD_ACPI=m
#CONFIG_THINKPAD_ACPI_DEBUGFACILITIESis not setCONFIG_THINKPAD_ACPI_DEBUG=y
#CONFIG_THINKPAD_ACPI_UNSAFE_LEDSis not setCONFIG_THINKPAD_ACPI_VIDEO=y
#CONFIG_THINKPAD_ACPI_HOTKEY_POLLis not set
#CONFIG_INTEL_MENLOWis not set
#CONFIG_EEEPC_LAPTOPis not set
#CONFIG_ACPI_WMIis not set
#CONFIG_ACPI_ASUSis not setCONFIG_ACPI_TOSHIBA=m#
# Firmware Drivers
#CONFIG_EDD=m
#CONFIG_EDD_OFFis not setCONFIG_FIRMWARE_MEMMAP=yCONFIG_EFI_VARS=m
#CONFIG_DELL_RBUis not set
#CONFIG_DCDBASis not setCONFIG_DMIID=y
#CONFIG_ISCSI_IBFT_FINDis not set#
# File systems
#CONFIG_EXT2_FS=yCONFIG_EXT2_FS_XATTR=yCONFIG_EXT2_FS_POSIX_ACL=yCONFIG_EXT2_FS_SECURITY=y
#CONFIG_EXT2_FS_XIPis not setCONFIG_EXT3_FS=y
#CONFIG_EXT3_DEFAULTS_TO_ORDEREDis not setCONFIG_EXT3_FS_XATTR=yCONFIG_EXT3_FS_POSIX_ACL=yCONFIG_EXT3_FS_SECURITY=yCONFIG_EXT4_FS=m
#CONFIG_EXT4DEV_COMPATis not setCONFIG_EXT4_FS_XATTR=yCONFIG_EXT4_FS_POSIX_ACL=yCONFIG_EXT4_FS_SECURITY=yCONFIG_JBD=y
#CONFIG_JBD_DEBUGis not setCONFIG_JBD2=m
#CONFIG_JBD2_DEBUGis not setCONFIG_FS_MBCACHE=yCONFIG_REISERFS_FS=m
#CONFIG_REISERFS_CHECKis not setCONFIG_REISERFS_PROC_INFO=yCONFIG_REISERFS_FS_XATTR=yCONFIG_REISERFS_FS_POSIX_ACL=yCONFIG_REISERFS_FS_SECURITY=y
#CONFIG_JFS_FSis not setCONFIG_FS_POSIX_ACL=yCONFIG_XFS_FS=mCONFIG_XFS_QUOTA=yCONFIG_XFS_POSIX_ACL=yCONFIG_XFS_RT=y
#CONFIG_XFS_DEBUGis not set
#CONFIG_GFS2_FSis not set
#CONFIG_OCFS2_FSis not setCONFIG_BTRFS_FS=m
#CONFIG_BTRFS_FS_POSIX_ACLis not setCONFIG_FILE_LOCKING=yCONFIG_FSNOTIFY=yCONFIG_DNOTIFY=yCONFIG_INOTIFY=yCONFIG_INOTIFY_USER=y
#CONFIG_QUOTAis not setCONFIG_QUOTACTL=yCONFIG_AUTOFS_FS=mCONFIG_AUTOFS4_FS=mCONFIG_FUSE_FS=mCONFIG_CUSE=mCONFIG_GENERIC_ACL=y#
# Caches
#
#CONFIG_FSCACHEis not set#
# CD-ROM/DVD Filesystems
#CONFIG_ISO9660_FS=mCONFIG_JOLIET=yCONFIG_ZISOFS=yCONFIG_UDF_FS=mCONFIG_UDF_NLS=y#
# DOS/FAT/NT Filesystems
#CONFIG_FAT_FS=m
#CONFIG_MSDOS_FSis not setCONFIG_VFAT_FS=mCONFIG_FAT_DEFAULT_CODEPAGE=437CONFIG_FAT_DEFAULT_IOCHARSET="utf8"CONFIG_NTFS_FS=m
#CONFIG_NTFS_DEBUGis not setCONFIG_NTFS_RW=y#
# Pseudo filesystems
#CONFIG_PROC_FS=yCONFIG_PROC_KCORE=yCONFIG_PROC_SYSCTL=yCONFIG_PROC_PAGE_MONITOR=yCONFIG_SYSFS=yCONFIG_TMPFS=yCONFIG_TMPFS_POSIX_ACL=y
#CONFIG_HUGETLBFSis not set
#CONFIG_HUGETLB_PAGEis not setCONFIG_CONFIGFS_FS=mCONFIG_MISC_FILESYSTEMS=y
#CONFIG_ADFS_FSis not set
#CONFIG_AFFS_FSis not set
#CONFIG_HFS_FSis not set
#CONFIG_HFSPLUS_FSis not set
#CONFIG_BEFS_FSis not set
#CONFIG_BFS_FSis not set
#CONFIG_EFS_FSis not setCONFIG_JFFS2_FS=mCONFIG_JFFS2_FS_DEBUG=0CONFIG_JFFS2_FS_WRITEBUFFER=y
#CONFIG_JFFS2_FS_WBUF_VERIFYis not set
#CONFIG_JFFS2_SUMMARYis not set
#CONFIG_JFFS2_FS_XATTRis not setCONFIG_JFFS2_COMPRESSION_OPTIONS=yCONFIG_JFFS2_ZLIB=yCONFIG_JFFS2_LZO=yCONFIG_JFFS2_RTIME=yCONFIG_JFFS2_RUBIN=y
#CONFIG_JFFS2_CMODE_NONEis not setCONFIG_JFFS2_CMODE_PRIORITY=y
#CONFIG_JFFS2_CMODE_SIZEis not set
#CONFIG_JFFS2_CMODE_FAVOURLZOis not setCONFIG_CRAMFS=mCONFIG_SQUASHFS=m
#CONFIG_SQUASHFS_EMBEDDEDis not setCONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
#CONFIG_VXFS_FSis not set
#CONFIG_MINIX_FSis not set
#CONFIG_OMFS_FSis not set
#CONFIG_HPFS_FSis not set
#CONFIG_QNX4FS_FSis not set
#CONFIG_ROMFS_FSis not set
#CONFIG_SYSV_FSis not set
#CONFIG_UFS_FSis not set
#CONFIG_NILFS2_FSis not setCONFIG_NETWORK_FILESYSTEMS=yCONFIG_NFS_FS=mCONFIG_NFS_V3=yCONFIG_NFS_V3_ACL=yCONFIG_NFS_V4=y
#CONFIG_NFS_V4_1is not setCONFIG_NFSD=mCONFIG_NFSD_V2_ACL=yCONFIG_NFSD_V3=yCONFIG_NFSD_V3_ACL=yCONFIG_NFSD_V4=yCONFIG_LOCKD=mCONFIG_LOCKD_V4=yCONFIG_EXPORTFS=mCONFIG_NFS_ACL_SUPPORT=mCONFIG_NFS_COMMON=yCONFIG_SUNRPC=mCONFIG_SUNRPC_GSS=mCONFIG_RPCSEC_GSS_KRB5=m
#CONFIG_RPCSEC_GSS_SPKM3is not setCONFIG_SMB_FS=mCONFIG_SMB_NLS_DEFAULT=yCONFIG_SMB_NLS_REMOTE="cp437"CONFIG_CIFS=m
#CONFIG_CIFS_STATSis not set
#CONFIG_CIFS_WEAK_PW_HASHis not setCONFIG_CIFS_XATTR=yCONFIG_CIFS_POSIX=y
#CONFIG_CIFS_DEBUG2is not setCONFIG_CIFS_EXPERIMENTAL=y
#CONFIG_NCP_FSis not set
#CONFIG_CODA_FSis not set
#CONFIG_AFS_FSis not set#
# Partition Types
#CONFIG_PARTITION_ADVANCED=y
#CONFIG_ACORN_PARTITIONis not set
#CONFIG_OSF_PARTITIONis not setCONFIG_AMIGA_PARTITION=y
#CONFIG_ATARI_PARTITIONis not set
#CONFIG_MAC_PARTITIONis not setCONFIG_MSDOS_PARTITION=y
#CONFIG_BSD_DISKLABELis not set
#CONFIG_MINIX_SUBPARTITIONis not set
#CONFIG_SOLARIS_X86_PARTITIONis not set
#CONFIG_UNIXWARE_DISKLABELis not setCONFIG_LDM_PARTITION=y
#CONFIG_LDM_DEBUGis not set
#CONFIG_SGI_PARTITIONis not set
#CONFIG_ULTRIX_PARTITIONis not set
#CONFIG_SUN_PARTITIONis not set
#CONFIG_KARMA_PARTITIONis not setCONFIG_EFI_PARTITION=y
#CONFIG_SYSV68_PARTITIONis not setCONFIG_NLS=yCONFIG_NLS_DEFAULT="iso8859-1"
#CONFIG_NLS_CODEPAGE_437is not set
#CONFIG_NLS_CODEPAGE_737is not set
#CONFIG_NLS_CODEPAGE_775is not set
#CONFIG_NLS_CODEPAGE_850is not setCONFIG_NLS_CODEPAGE_852=m
#CONFIG_NLS_CODEPAGE_855is not set
#CONFIG_NLS_CODEPAGE_857is not set
#CONFIG_NLS_CODEPAGE_860is not set
#CONFIG_NLS_CODEPAGE_861is not set
#CONFIG_NLS_CODEPAGE_862is not set
#CONFIG_NLS_CODEPAGE_863is not set
#CONFIG_NLS_CODEPAGE_864is not set
#CONFIG_NLS_CODEPAGE_865is not set
#CONFIG_NLS_CODEPAGE_866is not set
#CONFIG_NLS_CODEPAGE_869is not set
#CONFIG_NLS_CODEPAGE_936is not set
#CONFIG_NLS_CODEPAGE_950is not set
#CONFIG_NLS_CODEPAGE_932is not set
#CONFIG_NLS_CODEPAGE_949is not set
#CONFIG_NLS_CODEPAGE_874is not set
#CONFIG_NLS_ISO8859_8is not setCONFIG_NLS_CODEPAGE_1250=m
#CONFIG_NLS_CODEPAGE_1251is not setCONFIG_NLS_ASCII=yCONFIG_NLS_ISO8859_1=mCONFIG_NLS_ISO8859_2=m
#CONFIG_NLS_ISO8859_3is not set
#CONFIG_NLS_ISO8859_4is not set
#CONFIG_NLS_ISO8859_5is not set
#CONFIG_NLS_ISO8859_6is not set
#CONFIG_NLS_ISO8859_7is not set
#CONFIG_NLS_ISO8859_9is not set
#CONFIG_NLS_ISO8859_13is not set
#CONFIG_NLS_ISO8859_14is not set
#CONFIG_NLS_ISO8859_15is not set
#CONFIG_NLS_KOI8_Ris not set
#CONFIG_NLS_KOI8_Uis not setCONFIG_NLS_UTF8=m
#CONFIG_DLMis not set#
# Kernel hacking
#CONFIG_TRACE_IRQFLAGS_SUPPORT=yCONFIG_PRINTK_TIME=yCONFIG_ENABLE_WARN_DEPRECATED=yCONFIG_ENABLE_MUST_CHECK=yCONFIG_FRAME_WARN=2048CONFIG_MAGIC_SYSRQ=y
#CONFIG_UNUSED_SYMBOLSis not setCONFIG_DEBUG_FS=y
#CONFIG_HEADERS_CHECKis not setCONFIG_DEBUG_KERNEL=yCONFIG_DEBUG_SHIRQ=yCONFIG_DETECT_SOFTLOCKUP=y
#CONFIG_BOOTPARAM_SOFTLOCKUP_PANICis not setCONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0CONFIG_DETECT_HUNG_TASK=y
#CONFIG_BOOTPARAM_HUNG_TASK_PANICis not setCONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0CONFIG_SCHED_DEBUG=yCONFIG_SCHEDSTATS=yCONFIG_TIMER_STATS=yCONFIG_DEBUG_OBJECTS=y
#CONFIG_DEBUG_OBJECTS_SELFTESTis not setCONFIG_DEBUG_OBJECTS_FREE=yCONFIG_DEBUG_OBJECTS_TIMERS=yCONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1CONFIG_SLUB_DEBUG_ON=y
#CONFIG_SLUB_STATSis not set
#CONFIG_DEBUG_KMEMLEAKis not setCONFIG_DEBUG_RT_MUTEXES=yCONFIG_DEBUG_PI_LIST=y
#CONFIG_RT_MUTEX_TESTERis not setCONFIG_DEBUG_SPINLOCK=yCONFIG_DEBUG_MUTEXES=yCONFIG_DEBUG_LOCK_ALLOC=yCONFIG_PROVE_LOCKING=yCONFIG_LOCKDEP=yCONFIG_LOCK_STAT=y
#CONFIG_DEBUG_LOCKDEPis not setCONFIG_TRACE_IRQFLAGS=yCONFIG_DEBUG_SPINLOCK_SLEEP=y
#CONFIG_DEBUG_LOCKING_API_SELFTESTSis not setCONFIG_STACKTRACE=y
#CONFIG_DEBUG_KOBJECTis not setCONFIG_DEBUG_BUGVERBOSE=yCONFIG_DEBUG_INFO=yCONFIG_DEBUG_VM=y
#CONFIG_DEBUG_VIRTUALis not set
#CONFIG_DEBUG_WRITECOUNTis not set
#CONFIG_DEBUG_MEMORY_INITis not setCONFIG_DEBUG_LIST=yCONFIG_DEBUG_SG=yCONFIG_DEBUG_NOTIFIERS=yCONFIG_ARCH_WANT_FRAME_POINTERS=yCONFIG_FRAME_POINTER=y
#CONFIG_BOOT_PRINTK_DELAYis not set
#CONFIG_RCU_TORTURE_TESTis not setCONFIG_RCU_CPU_STALL_DETECTOR=y
#CONFIG_KPROBES_SANITY_TESTis not set
#CONFIG_BACKTRACE_SELF_TESTis not set
#CONFIG_DEBUG_BLOCK_EXT_DEVTis not set
#CONFIG_LKDTMis not set
#CONFIG_FAULT_INJECTIONis not setCONFIG_LATENCYTOP=y
#CONFIG_SYSCTL_SYSCALL_CHECKis not setCONFIG_DEBUG_PAGEALLOC=yCONFIG_USER_STACKTRACE_SUPPORT=yCONFIG_NOP_TRACER=yCONFIG_HAVE_FTRACE_NMI_ENTER=yCONFIG_HAVE_FUNCTION_TRACER=yCONFIG_HAVE_FUNCTION_GRAPH_TRACER=yCONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=yCONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=yCONFIG_HAVE_DYNAMIC_FTRACE=yCONFIG_HAVE_FTRACE_MCOUNT_RECORD=yCONFIG_HAVE_FTRACE_SYSCALLS=yCONFIG_TRACER_MAX_TRACE=yCONFIG_RING_BUFFER=yCONFIG_FTRACE_NMI_ENTER=yCONFIG_EVENT_TRACING=yCONFIG_CONTEXT_SWITCH_TRACER=yCONFIG_TRACING=yCONFIG_GENERIC_TRACER=yCONFIG_TRACING_SUPPORT=yCONFIG_FTRACE=yCONFIG_FUNCTION_TRACER=yCONFIG_FUNCTION_GRAPH_TRACER=yCONFIG_IRQSOFF_TRACER=yCONFIG_SYSPROF_TRACER=yCONFIG_SCHED_TRACER=y
#CONFIG_FTRACE_SYSCALLSis not setCONFIG_BOOT_TRACER=yCONFIG_BRANCH_PROFILE_NONE=y
#CONFIG_PROFILE_ANNOTATED_BRANCHESis not set
#CONFIG_PROFILE_ALL_BRANCHESis not setCONFIG_POWER_TRACER=yCONFIG_STACK_TRACER=yCONFIG_KMEMTRACE=yCONFIG_WORKQUEUE_TRACER=y
#CONFIG_BLK_DEV_IO_TRACEis not setCONFIG_DYNAMIC_FTRACE=y
#CONFIG_FUNCTION_PROFILERis not setCONFIG_FTRACE_MCOUNT_RECORD=y
#CONFIG_FTRACE_STARTUP_TESTis not setCONFIG_MMIOTRACE=yCONFIG_MMIOTRACE_TEST=m
#CONFIG_RING_BUFFER_BENCHMARKis not set
#CONFIG_PROVIDE_OHCI1394_DMA_INITis not set
#CONFIG_DYNAMIC_DEBUGis not setCONFIG_DMA_API_DEBUG=y
#CONFIG_SAMPLESis not setCONFIG_HAVE_ARCH_KGDB=y
#CONFIG_KGDBis not setCONFIG_HAVE_ARCH_KMEMCHECK=y
#CONFIG_STRICT_DEVMEMis not setCONFIG_X86_VERBOSE_BOOTUP=y
#CONFIG_EARLY_PRINTKis not setCONFIG_DEBUG_STACKOVERFLOW=yCONFIG_DEBUG_STACK_USAGE=y
#CONFIG_DEBUG_PER_CPU_MAPSis not setCONFIG_X86_PTDUMP=yCONFIG_DEBUG_RODATA=y
#CONFIG_DEBUG_RODATA_TESTis not set
#CONFIG_DEBUG_NX_TESTis not set
#CONFIG_IOMMU_DEBUGis not set
#CONFIG_IOMMU_STRESSis not setCONFIG_HAVE_MMIOTRACE_SUPPORT=yCONFIG_IO_DELAY_TYPE_0X80=0CONFIG_IO_DELAY_TYPE_0XED=1CONFIG_IO_DELAY_TYPE_UDELAY=2CONFIG_IO_DELAY_TYPE_NONE=3CONFIG_IO_DELAY_0X80=y
#CONFIG_IO_DELAY_0XEDis not set
#CONFIG_IO_DELAY_UDELAYis not set
#CONFIG_IO_DELAY_NONEis not setCONFIG_DEFAULT_IO_DELAY_TYPE=0CONFIG_DEBUG_BOOT_PARAMS=y
#CONFIG_CPA_DEBUGis not setCONFIG_OPTIMIZE_INLINING=y#
# Security options
#
#CONFIG_KEYSis not setCONFIG_SECURITY=y
#CONFIG_SECURITYFSis not setCONFIG_SECURITY_NETWORK=y
#CONFIG_SECURITY_NETWORK_XFRMis not set
#CONFIG_SECURITY_PATHis not set
#CONFIG_SECURITY_FILE_CAPABILITIESis not setCONFIG_SECURITY_SELINUX=yCONFIG_SECURITY_SELINUX_BOOTPARAM=yCONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1CONFIG_SECURITY_SELINUX_DISABLE=yCONFIG_SECURITY_SELINUX_DEVELOP=yCONFIG_SECURITY_SELINUX_AVC_STATS=yCONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
#CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAXis not set #CONFIG_SECURITY_TOMOYOis not set
#CONFIG_IMAis not setCONFIG_XOR_BLOCKS=mCONFIG_ASYNC_CORE=mCONFIG_ASYNC_MEMCPY=mCONFIG_ASYNC_XOR=mCONFIG_CRYPTO=y#
# Crypto core or helper
#
#CONFIG_CRYPTO_FIPSis not setCONFIG_CRYPTO_ALGAPI=mCONFIG_CRYPTO_ALGAPI2=mCONFIG_CRYPTO_AEAD2=mCONFIG_CRYPTO_BLKCIPHER=mCONFIG_CRYPTO_BLKCIPHER2=mCONFIG_CRYPTO_HASH=mCONFIG_CRYPTO_HASH2=mCONFIG_CRYPTO_RNG2=mCONFIG_CRYPTO_PCOMP=mCONFIG_CRYPTO_MANAGER=mCONFIG_CRYPTO_MANAGER2=m
#CONFIG_CRYPTO_GF128MULis not set
#CONFIG_CRYPTO_NULLis not setCONFIG_CRYPTO_WORKQUEUE=m
#CONFIG_CRYPTO_CRYPTDis not set
#CONFIG_CRYPTO_AUTHENCis not set
#CONFIG_CRYPTO_TESTis not set#
# Authenticated Encryption with Associated Data
#
#CONFIG_CRYPTO_CCMis not set
#CONFIG_CRYPTO_GCMis not set
#CONFIG_CRYPTO_SEQIVis not set#
# Block modes
#CONFIG_CRYPTO_CBC=m
#CONFIG_CRYPTO_CTRis not set
#CONFIG_CRYPTO_CTSis not setCONFIG_CRYPTO_ECB=m
#CONFIG_CRYPTO_LRWis not set
#CONFIG_CRYPTO_PCBCis not set
#CONFIG_CRYPTO_XTSis not set#
# Hash modes
#CONFIG_CRYPTO_HMAC=m
#CONFIG_CRYPTO_XCBCis not set#
# Digest
#CONFIG_CRYPTO_CRC32C=m
#CONFIG_CRYPTO_CRC32C_INTELis not set
#CONFIG_CRYPTO_MD4is not setCONFIG_CRYPTO_MD5=mCONFIG_CRYPTO_MICHAEL_MIC=m
#CONFIG_CRYPTO_RMD128is not set
#CONFIG_CRYPTO_RMD160is not set
#CONFIG_CRYPTO_RMD256is not set
#CONFIG_CRYPTO_RMD320is not setCONFIG_CRYPTO_SHA1=mCONFIG_CRYPTO_SHA256=m
#CONFIG_CRYPTO_SHA512is not set
#CONFIG_CRYPTO_TGR192is not set
#CONFIG_CRYPTO_WP512is not set#
# Ciphers
#CONFIG_CRYPTO_AES=m
#CONFIG_CRYPTO_AES_X86_64is not set
#CONFIG_CRYPTO_AES_NI_INTELis not set
#CONFIG_CRYPTO_ANUBISis not setCONFIG_CRYPTO_ARC4=m
#CONFIG_CRYPTO_BLOWFISHis not set
#CONFIG_CRYPTO_CAMELLIAis not set
#CONFIG_CRYPTO_CAST5is not set
#CONFIG_CRYPTO_CAST6is not setCONFIG_CRYPTO_DES=m
#CONFIG_CRYPTO_FCRYPTis not set
#CONFIG_CRYPTO_KHAZADis not set
#CONFIG_CRYPTO_SALSA20is not set
#CONFIG_CRYPTO_SALSA20_X86_64is not set
#CONFIG_CRYPTO_SEEDis not set
#CONFIG_CRYPTO_SERPENTis not set
#CONFIG_CRYPTO_TEAis not set
#CONFIG_CRYPTO_TWOFISHis not set
#CONFIG_CRYPTO_TWOFISH_X86_64is not set#
# Compression
#
#CONFIG_CRYPTO_DEFLATEis not set
#CONFIG_CRYPTO_ZLIBis not set
#CONFIG_CRYPTO_LZOis not set#
# Random Number Generation
#
#CONFIG_CRYPTO_ANSI_CPRNGis not setCONFIG_CRYPTO_HW=y
#CONFIG_CRYPTO_DEV_PADLOCKis not set
#CONFIG_CRYPTO_DEV_HIFN_795Xis not setCONFIG_HAVE_KVM=yCONFIG_HAVE_KVM_IRQCHIP=yCONFIG_VIRTUALIZATION=yCONFIG_KVM=mCONFIG_KVM_INTEL=mCONFIG_KVM_AMD=mCONFIG_KVM_TRACE=yCONFIG_VIRTIO=mCONFIG_VIRTIO_RING=mCONFIG_VIRTIO_PCI=mCONFIG_VIRTIO_BALLOON=mCONFIG_BINARY_PRINTF=y#
# Library routines
#CONFIG_BITREVERSE=yCONFIG_GENERIC_FIND_FIRST_BIT=yCONFIG_GENERIC_FIND_NEXT_BIT=yCONFIG_GENERIC_FIND_LAST_BIT=yCONFIG_CRC_CCITT=mCONFIG_CRC16=mCONFIG_CRC_T10DIF=yCONFIG_CRC_ITU_T=mCONFIG_CRC32=y
#CONFIG_CRC7is not setCONFIG_LIBCRC32C=mCONFIG_ZLIB_INFLATE=yCONFIG_ZLIB_DEFLATE=mCONFIG_LZO_COMPRESS=mCONFIG_LZO_DECOMPRESS=mCONFIG_DECOMPRESS_GZIP=yCONFIG_DECOMPRESS_BZIP2=yCONFIG_HAS_IOMEM=yCONFIG_HAS_IOPORT=yCONFIG_HAS_DMA=yCONFIG_NLATTR=y
2009/8/11 Christoph Lameter <[email protected]>:
Quoted 5 lines
Looks like slab data corruption on early boot that cannot be reported since the system has not fully bootstrapped yet. Instead of a report you get a general protection fault. The primary issue is slab data corruption though.
Well - I've tried to switch from 'slub' allocator to old 'slab' allocator and the problem is gone - shutdown goes without any problem.
So it's probably related to 'slub' allocator only?
Is there anything else I could try to better detect this problem?
(well the bisect should be last resort - as it might be pretty lengthy
- I'm not really sure which kernel would be actually good for the start)
Zdenek
Quoted 3,179 lines
Quoted 3,178 lines
Recently I'm getting complete system freeze during reboot - usually just after iptables frees modules the oops strikes in - oops is taken via serial console on the second machine - as this machine is completely dead in this moment.
I'm using a lot of memory debug options - so this might be the result?
- looks like some memory gets mangled??. For some time I've suspected kmemleak - thus I've been not reporting it when it happened for the first time (few weeks already) - but this kernel is compiled without kmemleak and still crashes.Also the crash will not happen with booting to single mode - the full startup (without Xorg) must happen to get this crash on reboot.
My machine is T61, 4GB, C2D, x86_64
Kernel vanilla git commit: 85dfd81dc57e8183a277ddd7a56aa65c96f3f487 with two very small unrelated patches on top of this. .config attached.general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC last sysfs file: /sys/module/nf_conntrack/refcnt CPU 1 Modules linked in: sit tunnel4 bridge stp llc rfcomm sco l2cap sunrpcautofs4 ipv6
binfmt_miscloopdm_mirrordm_region_hashdm_logdm_modkvm_intelkvm i915 drmi2c_algo_bituinput arc4 ecb cryptomgr aead pcompresscrypto_blkciphercrypto_hashcrypto_algapisnd_hda_codec_analogiwl3945snd_hda_intelsnd_hda_codecsnd_seq_osssnd_seq_midi_eventiwlcoresnd_seqsnd_seq_devicesnd_pcm_osssnd_mixer_ossbtusbsnd_pcmbluetooth mac80211snd_timerrtc_cmoscfg80211 sndthinkpad_acpirfkillrtc_coresdhci_pcisdhci psmouse video soundcorertc_libbacklightsnd_page_allocusbhid hidmmc_coresr_modserio_rawevdev output nvramiTCO_wdtiTCO_vendor_supportbutton cdromled_classi2c_i801e1000e battery acintel_agpi2c_coreuhci_hcdohci_hcdehci_hcdusbcore [last unloaded:nf_conntrack]
Pid: 0, comm: swapper Not tainted 2.6.31-rc5-00472-g3d32107 #4 6464CTORIP: 0010:[<ffffffff811d9c69>] [<ffffffff811d9c69>] strnlen+0x9/0x40RSP: 0018:ffff88002efdfa20 EFLAGS: 00010086
RAX:ffffffff8149a952RBX:ffffffff81817cc0RCX: 0000000000000002
RDX:6b6b6b6b6b6b6b6bRSI: ffffffffffffffff RDI:6b6b6b6b6b6b6b6b
RBP:ffff88002efdfa20R08: 0000000000000073 R09: 0000000000000000
R10: 0000000000000000 R11:ffffffff8104cfd8R12:ffffffff818178c7
R13:6b6b6b6b6b6b6b6bR14:00000000ffffffffR15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff88002efdc000(0000) knlGS:0000000000000000
CS: 0010 DS: 0018 ES: 0018 CR0:000000008005003b
CR2:000000000240d190CR3: 0000000001001000 CR4:00000000000026e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6:00000000ffff0ff0DR7: 0000000000000400 Process swapper (pid: 0, threadinfoffff88013b95a000, taskffff88013b9346c0)Stack: ffff88002efdfa60 ffffffff811db9c0 0000000000000033 ffffffff818178c7 <0> ffffffff8148af64 ffffffff8148af62 ffff88002efdfbd0 ffffffff81817cc0 <0> ffff88002efdfb00 ffffffff811dc800 0000000000000004 0000000affffffff Call Trace: <IRQ> [<ffffffff811db9c0>] string+0x40/0x100 [<ffffffff811dc800>] vsnprintf+0x310/0x5d0 [<ffffffff811dcbd1>] vscnprintf+0x11/0x30 [<ffffffff8104d006>] vprintk+0x86/0x460 [<ffffffff811dc800>] ? vsnprintf+0x310/0x5d0 [<ffffffff8137d700>] printk+0x41/0x49 [<ffffffff810f9d7e>] slab_bug+0x7e/0xa0 [<ffffffff81380bb7>] ? _spin_unlock_irqrestore+0x57/0x70 [<ffffffff810f9e91>] slab_err+0x71/0xb0 [<ffffffff81380b50>] ? _spin_unlock_irq+0x30/0x40 [<ffffffff810fa2b9>] slab_pad_check+0x129/0x160 [<ffffffff810fc0be>] __free_slab+0xde/0x170 [<ffffffff810a3230>] ? __rcu_process_callbacks+0xa0/0x350 [<ffffffff810fc1a6>] rcu_free_slab+0x16/0x20 [<ffffffff810a3327>] __rcu_process_callbacks+0x197/0x350 [<ffffffff810a350b>] rcu_process_callbacks+0x2b/0x50 [<ffffffff81052e7c>] __do_softirq+0xbc/0x200 [<ffffffff8100d2dc>] call_softirq+0x1c/0x50 [<ffffffff8100eb65>] do_softirq+0x75/0xb0 [<ffffffff81052935>] irq_exit+0x95/0xa0 [<ffffffff81385f15>] do_IRQ+0x75/0xf0 [<ffffffff8100cad3>] ret_from_intr+0x0/0xf<EOI>
[<ffffffff8123e60b>] ?acpi_idle_enter_bm+0x24d/0x27f[<ffffffff8123e608>] ?acpi_idle_enter_bm+0x24a/0x27f[<ffffffff812dd283>] ?cpuidle_idle_call+0xa3/0x100[<ffffffff8100ae80>] ?cpu_idle+0x70/0xc0[<ffffffff81379eea>] ?start_secondary+0x189/0x18eCode: c9 c3 55 31 c0 48 89 e5 48 89 fa 80 3f 00 74 10 66 90 48 ff c280 3a 00 75 f8 48 89 d0 48 29 f8 c9 c3 55 48 85 f6 48 89 e5 74 2c <80> 3f 00 74 27 48 ff ce 48 89 f8 eb 12 66 2e 0f 1f 84 00 00 00 RIP [<ffffffff811d9c69>]
strnlen+0x9/0x40
RSP <ffff88002efdfa20>---[ end trace a1644c95984b956d ]--- Kernel panic - not syncing: Fatal exception in interrupt Pid: 0, comm: swapper Tainted: G D 2.6.31-rc5-00472-g3d32107 #4 Call Trace: <IRQ> [<ffffffff8137d609>] panic+0x78/0x12e [<ffffffff81380bb7>] ? _spin_unlock_irqrestore+0x57/0x70 [<ffffffff8138242a>] oops_end+0xda/0xe0 [<ffffffff8101013b>] die+0x5b/0x90 [<ffffffff81382242>] do_general_protection+0x152/0x160 [<ffffffff8138163f>] general_protection+0x1f/0x30 [<ffffffff8104cfd8>] ? vprintk+0x58/0x460 [<ffffffff811d9c69>] ? strnlen+0x9/0x40 [<ffffffff811db9c0>] string+0x40/0x100 [<ffffffff811dc800>] vsnprintf+0x310/0x5d0 [<ffffffff811dcbd1>] vscnprintf+0x11/0x30 [<ffffffff8104d006>] vprintk+0x86/0x460 [<ffffffff811dc800>] ? vsnprintf+0x310/0x5d0 [<ffffffff8137d700>] printk+0x41/0x49 [<ffffffff810f9d7e>] slab_bug+0x7e/0xa0 [<ffffffff81380bb7>] ? _spin_unlock_irqrestore+0x57/0x70 [<ffffffff810f9e91>] slab_err+0x71/0xb0 [<ffffffff81380b50>] ? _spin_unlock_irq+0x30/0x40 [<ffffffff810fa2b9>] slab_pad_check+0x129/0x160 [<ffffffff810fc0be>] __free_slab+0xde/0x170 [<ffffffff810a3230>] ? __rcu_process_callbacks+0xa0/0x350 [<ffffffff810fc1a6>] rcu_free_slab+0x16/0x20 [<ffffffff810a3327>] __rcu_process_callbacks+0x197/0x350 [<ffffffff810a350b>] rcu_process_callbacks+0x2b/0x50 [<ffffffff81052e7c>] __do_softirq+0xbc/0x200 [<ffffffff8100d2dc>] call_softirq+0x1c/0x50 [<ffffffff8100eb65>] do_softirq+0x75/0xb0 [<ffffffff81052935>] irq_exit+0x95/0xa0 [<ffffffff81385f15>] do_IRQ+0x75/0xf0 [<ffffffff8100cad3>] ret_from_intr+0x0/0xf <EOI> [<ffffffff8123e60b>] ? acpi_idle_enter_bm+0x24d/0x27f [<ffffffff8123e608>] ? acpi_idle_enter_bm+0x24a/0x27f [<ffffffff812dd283>] ? cpuidle_idle_call+0xa3/0x100 [<ffffffff8100ae80>] ? cpu_idle+0x70/0xc0 [<ffffffff81379eea>] ? start_secondary+0x189/0x18e#
# Automatically generated make config: don't edit # Linux kernel version: 2.6.31-rc5
# Tue Aug 11 13:46:11 2009
#CONFIG_64BIT=y
#CONFIG_X86_32is not setCONFIG_X86_64=yCONFIG_X86=yCONFIG_OUTPUT_FORMAT="elf64-x86-64"CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"CONFIG_GENERIC_TIME=yCONFIG_GENERIC_CMOS_UPDATE=yCONFIG_CLOCKSOURCE_WATCHDOG=yCONFIG_GENERIC_CLOCKEVENTS=yCONFIG_GENERIC_CLOCKEVENTS_BROADCAST=yCONFIG_LOCKDEP_SUPPORT=yCONFIG_STACKTRACE_SUPPORT=yCONFIG_HAVE_LATENCYTOP_SUPPORT=yCONFIG_FAST_CMPXCHG_LOCAL=yCONFIG_MMU=yCONFIG_ZONE_DMA=yCONFIG_GENERIC_ISA_DMA=yCONFIG_GENERIC_IOMAP=yCONFIG_GENERIC_BUG=yCONFIG_GENERIC_BUG_RELATIVE_POINTERS=yCONFIG_GENERIC_HWEIGHT=yCONFIG_ARCH_MAY_HAVE_PC_FDC=yCONFIG_RWSEM_GENERIC_SPINLOCK=y
#CONFIG_RWSEM_XCHGADD_ALGORITHMis not setCONFIG_ARCH_HAS_CPU_IDLE_WAIT=yCONFIG_GENERIC_CALIBRATE_DELAY=yCONFIG_GENERIC_TIME_VSYSCALL=yCONFIG_ARCH_HAS_CPU_RELAX=yCONFIG_ARCH_HAS_DEFAULT_IDLE=yCONFIG_ARCH_HAS_CACHE_LINE_SIZE=yCONFIG_HAVE_SETUP_PER_CPU_AREA=yCONFIG_HAVE_DYNAMIC_PER_CPU_AREA=yCONFIG_HAVE_CPUMASK_OF_CPU_MAP=yCONFIG_ARCH_HIBERNATION_POSSIBLE=yCONFIG_ARCH_SUSPEND_POSSIBLE=yCONFIG_ZONE_DMA32=yCONFIG_ARCH_POPULATES_NODE_MAP=yCONFIG_AUDIT_ARCH=yCONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=yCONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=yCONFIG_GENERIC_HARDIRQS=yCONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=yCONFIG_GENERIC_IRQ_PROBE=yCONFIG_GENERIC_PENDING_IRQ=yCONFIG_USE_GENERIC_SMP_HELPERS=yCONFIG_X86_64_SMP=yCONFIG_X86_HT=yCONFIG_X86_TRAMPOLINE=y
#CONFIG_KTIME_SCALARis not setCONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"CONFIG_CONSTRUCTORS=y#
# General setup
#CONFIG_EXPERIMENTAL=yCONFIG_LOCK_KERNEL=yCONFIG_INIT_ENV_ARG_LIMIT=32CONFIG_LOCALVERSION=""CONFIG_LOCALVERSION_AUTO=yCONFIG_HAVE_KERNEL_GZIP=yCONFIG_HAVE_KERNEL_BZIP2=yCONFIG_HAVE_KERNEL_LZMA=yCONFIG_KERNEL_GZIP=y
#CONFIG_KERNEL_BZIP2is not set
#CONFIG_KERNEL_LZMAis not setCONFIG_SWAP=yCONFIG_SYSVIPC=yCONFIG_SYSVIPC_SYSCTL=yCONFIG_POSIX_MQUEUE=yCONFIG_POSIX_MQUEUE_SYSCTL=yCONFIG_BSD_PROCESS_ACCT=yCONFIG_BSD_PROCESS_ACCT_V3=yCONFIG_TASKSTATS=yCONFIG_TASK_DELAY_ACCT=yCONFIG_TASK_XACCT=yCONFIG_TASK_IO_ACCOUNTING=yCONFIG_AUDIT=yCONFIG_AUDITSYSCALL=yCONFIG_AUDIT_TREE=y#
# RCU Subsystem
#CONFIG_CLASSIC_RCU=y
#CONFIG_TREE_RCUis not set
#CONFIG_PREEMPT_RCUis not set
#CONFIG_TREE_RCU_TRACEis not set
#CONFIG_PREEMPT_RCU_TRACEis not setCONFIG_IKCONFIG=mCONFIG_IKCONFIG_PROC=yCONFIG_LOG_BUF_SHIFT=18CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
#CONFIG_GROUP_SCHEDis not set
#CONFIG_CGROUPSis not set
#CONFIG_SYSFS_DEPRECATED_V2is not setCONFIG_RELAY=y
#CONFIG_NAMESPACESis not setCONFIG_BLK_DEV_INITRD=yCONFIG_INITRAMFS_SOURCE=""CONFIG_RD_GZIP=yCONFIG_RD_BZIP2=y
#CONFIG_RD_LZMAis not set
#CONFIG_CC_OPTIMIZE_FOR_SIZEis not setCONFIG_SYSCTL=yCONFIG_ANON_INODES=yCONFIG_EMBEDDED=yCONFIG_UID16=yCONFIG_SYSCTL_SYSCALL=yCONFIG_KALLSYMS=yCONFIG_KALLSYMS_ALL=yCONFIG_KALLSYMS_EXTRA_PASS=yCONFIG_HOTPLUG=yCONFIG_PRINTK=yCONFIG_BUG=yCONFIG_ELF_CORE=y
#CONFIG_PCSPKR_PLATFORMis not setCONFIG_BASE_FULL=yCONFIG_FUTEX=yCONFIG_EPOLL=yCONFIG_SIGNALFD=yCONFIG_TIMERFD=yCONFIG_EVENTFD=yCONFIG_SHMEM=yCONFIG_AIO=yCONFIG_HAVE_PERF_COUNTERS=y#
# Performance Counters
#CONFIG_PERF_COUNTERS=y
#CONFIG_EVENT_PROFILEis not setCONFIG_VM_EVENT_COUNTERS=yCONFIG_PCI_QUIRKS=yCONFIG_SLUB_DEBUG=y
#CONFIG_STRIP_ASM_SYMSis not set
#CONFIG_COMPAT_BRKis not set
#CONFIG_SLABis not setCONFIG_SLUB=y
#CONFIG_SLOBis not setCONFIG_PROFILING=yCONFIG_TRACEPOINTS=yCONFIG_MARKERS=yCONFIG_OPROFILE=m
#CONFIG_OPROFILE_IBSis not setCONFIG_HAVE_OPROFILE=yCONFIG_KPROBES=yCONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=yCONFIG_KRETPROBES=yCONFIG_HAVE_IOREMAP_PROT=yCONFIG_HAVE_KPROBES=yCONFIG_HAVE_KRETPROBES=yCONFIG_HAVE_ARCH_TRACEHOOK=yCONFIG_HAVE_DMA_ATTRS=yCONFIG_HAVE_DMA_API_DEBUG=y#
# GCOV-based kernel profiling
#
#CONFIG_GCOV_KERNELis not set
#CONFIG_SLOW_WORKis not set
#CONFIG_HAVE_GENERIC_DMA_COHERENTis not setCONFIG_SLABINFO=yCONFIG_RT_MUTEXES=yCONFIG_BASE_SMALL=0CONFIG_MODULES=yCONFIG_MODULE_FORCE_LOAD=yCONFIG_MODULE_UNLOAD=yCONFIG_MODULE_FORCE_UNLOAD=y
#CONFIG_MODVERSIONSis not set
#CONFIG_MODULE_SRCVERSION_ALLis not setCONFIG_STOP_MACHINE=yCONFIG_BLOCK=y
#CONFIG_BLK_DEV_BSGis not set
#CONFIG_BLK_DEV_INTEGRITYis not setCONFIG_BLOCK_COMPAT=y#
# IO Schedulers
#CONFIG_IOSCHED_NOOP=yCONFIG_IOSCHED_AS=yCONFIG_IOSCHED_DEADLINE=yCONFIG_IOSCHED_CFQ=y
#CONFIG_DEFAULT_ASis not set
#CONFIG_DEFAULT_DEADLINEis not setCONFIG_DEFAULT_CFQ=y
#CONFIG_DEFAULT_NOOPis not setCONFIG_DEFAULT_IOSCHED="cfq"CONFIG_PREEMPT_NOTIFIERS=yCONFIG_FREEZER=y#
# Processor type and features
#CONFIG_TICK_ONESHOT=yCONFIG_NO_HZ=yCONFIG_HIGH_RES_TIMERS=yCONFIG_GENERIC_CLOCKEVENTS_BUILD=yCONFIG_SMP=y
#CONFIG_SPARSE_IRQis not setCONFIG_X86_MPPARSE=yCONFIG_X86_EXTENDED_PLATFORM=y
#CONFIG_X86_VSMPis not setCONFIG_SCHED_OMIT_FRAME_POINTER=y
#CONFIG_PARAVIRT_GUESTis not setCONFIG_MEMTEST=y
#CONFIG_M386is not set
#CONFIG_M486is not set
#CONFIG_M586is not set
#CONFIG_M586TSCis not set
#CONFIG_M586MMXis not set
#CONFIG_M686is not set
#CONFIG_MPENTIUMIIis not set
#CONFIG_MPENTIUMIIIis not set
#CONFIG_MPENTIUMMis not set
#CONFIG_MPENTIUM4is not set
#CONFIG_MK6is not set
#CONFIG_MK7is not set
#CONFIG_MK8is not set
#CONFIG_MCRUSOEis not set
#CONFIG_MEFFICEONis not set
#CONFIG_MWINCHIPC6is not set
#CONFIG_MWINCHIP3Dis not set
#CONFIG_MGEODEGX1is not set
#CONFIG_MGEODE_LXis not set
#CONFIG_MCYRIXIIIis not set
#CONFIG_MVIAC3_2is not set
#CONFIG_MVIAC7is not set
#CONFIG_MPSCis not setCONFIG_MCORE2=y
#CONFIG_GENERIC_CPUis not setCONFIG_X86_CPU=yCONFIG_X86_L1_CACHE_BYTES=64CONFIG_X86_INTERNODE_CACHE_BYTES=64CONFIG_X86_CMPXCHG=yCONFIG_X86_L1_CACHE_SHIFT=6CONFIG_X86_WP_WORKS_OK=yCONFIG_X86_INTEL_USERCOPY=yCONFIG_X86_USE_PPRO_CHECKSUM=yCONFIG_X86_P6_NOP=yCONFIG_X86_TSC=yCONFIG_X86_CMPXCHG64=yCONFIG_X86_CMOV=yCONFIG_X86_MINIMUM_CPU_FAMILY=64CONFIG_X86_DEBUGCTLMSR=y
#CONFIG_PROCESSOR_SELECTis not setCONFIG_CPU_SUP_INTEL=yCONFIG_CPU_SUP_AMD=yCONFIG_CPU_SUP_CENTAUR=y
#CONFIG_X86_DSis not setCONFIG_HPET_TIMER=yCONFIG_HPET_EMULATE_RTC=yCONFIG_DMI=yCONFIG_GART_IOMMU=y
#CONFIG_CALGARY_IOMMUis not set
#CONFIG_AMD_IOMMUis not setCONFIG_SWIOTLB=yCONFIG_IOMMU_HELPER=y
#CONFIG_IOMMU_APIis not set
#CONFIG_MAXSMPis not setCONFIG_NR_CPUS=4
#CONFIG_SCHED_SMTis not setCONFIG_SCHED_MC=y
#CONFIG_PREEMPT_NONEis not setCONFIG_PREEMPT_VOLUNTARY=y
#CONFIG_PREEMPTis not setCONFIG_X86_LOCAL_APIC=yCONFIG_X86_IO_APIC=y
#CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQSis not setCONFIG_X86_MCE=yCONFIG_X86_NEW_MCE=yCONFIG_X86_MCE_INTEL=yCONFIG_X86_MCE_AMD=yCONFIG_X86_MCE_THRESHOLD=y
#CONFIG_X86_MCE_INJECTis not setCONFIG_X86_THERMAL_VECTOR=y
#CONFIG_I8Kis not setCONFIG_MICROCODE=mCONFIG_MICROCODE_INTEL=y
#CONFIG_MICROCODE_AMDis not setCONFIG_MICROCODE_OLD_INTERFACE=yCONFIG_X86_MSR=mCONFIG_X86_CPUID=mCONFIG_X86_CPU_DEBUG=mCONFIG_ARCH_PHYS_ADDR_T_64BIT=yCONFIG_DIRECT_GBPAGES=y
#CONFIG_NUMAis not setCONFIG_ARCH_SPARSEMEM_DEFAULT=yCONFIG_ARCH_SPARSEMEM_ENABLE=yCONFIG_ARCH_SELECT_MEMORY_MODEL=yCONFIG_SELECT_MEMORY_MODEL=y
#CONFIG_FLATMEM_MANUALis not set
#CONFIG_DISCONTIGMEM_MANUALis not setCONFIG_SPARSEMEM_MANUAL=yCONFIG_SPARSEMEM=yCONFIG_HAVE_MEMORY_PRESENT=yCONFIG_SPARSEMEM_EXTREME=yCONFIG_SPARSEMEM_VMEMMAP_ENABLE=yCONFIG_SPARSEMEM_VMEMMAP=y#
# Memory hotplug is currently incompatible with Software Suspend #CONFIG_PAGEFLAGS_EXTENDED=yCONFIG_SPLIT_PTLOCK_CPUS=4CONFIG_PHYS_ADDR_T_64BIT=yCONFIG_ZONE_DMA_FLAG=1CONFIG_BOUNCE=yCONFIG_VIRT_TO_BUS=yCONFIG_HAVE_MLOCK=yCONFIG_HAVE_MLOCKED_PAGE_BIT=yCONFIG_MMU_NOTIFIER=yCONFIG_DEFAULT_MMAP_MIN_ADDR=4096CONFIG_X86_CHECK_BIOS_CORRUPTION=yCONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=yCONFIG_X86_RESERVE_LOW_64K=yCONFIG_MTRR=yCONFIG_MTRR_SANITIZER=yCONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=1CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1CONFIG_X86_PAT=yCONFIG_EFI=y
#CONFIG_SECCOMPis not set
#CONFIG_CC_STACKPROTECTORis not set
#CONFIG_HZ_100is not set
#CONFIG_HZ_250is not setCONFIG_HZ_300=y
#CONFIG_HZ_1000is not setCONFIG_HZ=300CONFIG_SCHED_HRTICK=yCONFIG_KEXEC=y
#CONFIG_CRASH_DUMPis not set
#CONFIG_KEXEC_JUMPis not setCONFIG_PHYSICAL_START=0x200000
#CONFIG_RELOCATABLEis not setCONFIG_PHYSICAL_ALIGN=0x1000000CONFIG_HOTPLUG_CPU=y
#CONFIG_COMPAT_VDSOis not setCONFIG_CMDLINE_BOOL=yCONFIG_CMDLINE=""
#CONFIG_CMDLINE_OVERRIDEis not setCONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y#
# Power management and ACPI options
#CONFIG_ARCH_HIBERNATION_HEADER=yCONFIG_PM=y
#CONFIG_PM_DEBUGis not setCONFIG_PM_SLEEP_SMP=yCONFIG_PM_SLEEP=yCONFIG_SUSPEND=yCONFIG_SUSPEND_FREEZER=yCONFIG_HIBERNATION_NVS=yCONFIG_HIBERNATION=yCONFIG_PM_STD_PARTITION=""CONFIG_ACPI=yCONFIG_ACPI_SLEEP=yCONFIG_ACPI_PROCFS=yCONFIG_ACPI_PROCFS_POWER=yCONFIG_ACPI_SYSFS_POWER=yCONFIG_ACPI_PROC_EVENT=yCONFIG_ACPI_AC=mCONFIG_ACPI_BATTERY=mCONFIG_ACPI_BUTTON=mCONFIG_ACPI_VIDEO=mCONFIG_ACPI_FAN=mCONFIG_ACPI_DOCK=yCONFIG_ACPI_PROCESSOR=yCONFIG_ACPI_HOTPLUG_CPU=yCONFIG_ACPI_THERMAL=y
#CONFIG_ACPI_CUSTOM_DSDTis not setCONFIG_ACPI_BLACKLIST_YEAR=0CONFIG_ACPI_DEBUG=y
#CONFIG_ACPI_DEBUG_FUNC_TRACEis not setCONFIG_ACPI_PCI_SLOT=mCONFIG_X86_PM_TIMER=yCONFIG_ACPI_CONTAINER=yCONFIG_ACPI_SBS=m#
# CPU Frequency scaling
#CONFIG_CPU_FREQ=yCONFIG_CPU_FREQ_TABLE=y
#CONFIG_CPU_FREQ_DEBUGis not setCONFIG_CPU_FREQ_STAT=yCONFIG_CPU_FREQ_STAT_DETAILS=y
#CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCEis not set #CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVEis not set #CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACEis not setCONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
#CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVEis not setCONFIG_CPU_FREQ_GOV_PERFORMANCE=yCONFIG_CPU_FREQ_GOV_POWERSAVE=mCONFIG_CPU_FREQ_GOV_USERSPACE=mCONFIG_CPU_FREQ_GOV_ONDEMAND=y
#CONFIG_CPU_FREQ_GOV_CONSERVATIVEis not set#
# CPUFreq processor drivers
#CONFIG_X86_ACPI_CPUFREQ=y
#CONFIG_X86_POWERNOW_K8is not set
#CONFIG_X86_SPEEDSTEP_CENTRINOis not setCONFIG_X86_P4_CLOCKMOD=m#
# shared options # CONFIG_X86_SPEEDSTEP_LIB=m CONFIG_CPU_IDLE=y CONFIG_CPU_IDLE_GOV_LADDER=y CONFIG_CPU_IDLE_GOV_MENU=y#
# Memory power savings
#
#CONFIG_I7300_IDLEis not set#
# Bus options (PCI etc.)
#CONFIG_PCI=yCONFIG_PCI_DIRECT=yCONFIG_PCI_MMCONFIG=yCONFIG_PCI_DOMAINS=y
#CONFIG_DMARis not set
#CONFIG_INTR_REMAPis not setCONFIG_PCIEPORTBUS=yCONFIG_HOTPLUG_PCI_PCIE=mCONFIG_PCIEAER=y
#CONFIG_PCIE_ECRCis not set
#CONFIG_PCIEAER_INJECTis not setCONFIG_PCIEASPM=y
#CONFIG_PCIEASPM_DEBUGis not setCONFIG_ARCH_SUPPORTS_MSI=yCONFIG_PCI_MSI=yCONFIG_PCI_LEGACY=y
#CONFIG_PCI_DEBUGis not set
#CONFIG_PCI_STUBis not set
#CONFIG_HT_IRQis not set
#CONFIG_PCI_IOVis not setCONFIG_ISA_DMA_API=yCONFIG_K8_NB=yCONFIG_PCCARD=m
#CONFIG_PCMCIA_DEBUGis not setCONFIG_PCMCIA=mCONFIG_PCMCIA_LOAD_CIS=yCONFIG_PCMCIA_IOCTL=yCONFIG_CARDBUS=y#
# PC-card bridges
#
#CONFIG_YENTAis not set
#CONFIG_PD6729is not set
#CONFIG_I82092is not setCONFIG_HOTPLUG_PCI=m
#CONFIG_HOTPLUG_PCI_FAKEis not setCONFIG_HOTPLUG_PCI_ACPI=mCONFIG_HOTPLUG_PCI_ACPI_IBM=m
#CONFIG_HOTPLUG_PCI_CPCIis not set
#CONFIG_HOTPLUG_PCI_SHPCis not set#
# Executable file formats / Emulations
#CONFIG_BINFMT_ELF=yCONFIG_COMPAT_BINFMT_ELF=yCONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
#CONFIG_HAVE_AOUTis not setCONFIG_BINFMT_MISC=mCONFIG_IA32_EMULATION=yCONFIG_IA32_AOUT=mCONFIG_COMPAT=yCONFIG_COMPAT_FOR_U64_ALIGNMENT=yCONFIG_SYSVIPC_COMPAT=yCONFIG_NET=y#
# Networking options
#CONFIG_PACKET=yCONFIG_PACKET_MMAP=yCONFIG_UNIX=yCONFIG_XFRM=y
#CONFIG_XFRM_USERis not set
#CONFIG_XFRM_SUB_POLICYis not set
#CONFIG_XFRM_MIGRATEis not set
#CONFIG_XFRM_STATISTICSis not set
#CONFIG_NET_KEYis not setCONFIG_INET=yCONFIG_IP_MULTICAST=y
#CONFIG_IP_ADVANCED_ROUTERis not setCONFIG_IP_FIB_HASH=yCONFIG_IP_PNP=yCONFIG_IP_PNP_DHCP=yCONFIG_IP_PNP_BOOTP=y
#CONFIG_IP_PNP_RARPis not set
#CONFIG_NET_IPIPis not set
#CONFIG_NET_IPGREis not setCONFIG_IP_MROUTE=y
#CONFIG_IP_PIMSM_V1is not set
#CONFIG_IP_PIMSM_V2is not set
#CONFIG_ARPDis not setCONFIG_SYN_COOKIES=y
#CONFIG_INET_AHis not set
#CONFIG_INET_ESPis not set
#CONFIG_INET_IPCOMPis not set
#CONFIG_INET_XFRM_TUNNELis not setCONFIG_INET_TUNNEL=m
#CONFIG_INET_XFRM_MODE_TRANSPORTis not set #CONFIG_INET_XFRM_MODE_TUNNELis not set
#CONFIG_INET_XFRM_MODE_BEETis not set
#CONFIG_INET_LROis not set
#CONFIG_INET_DIAGis not setCONFIG_TCP_CONG_ADVANCED=yCONFIG_TCP_CONG_BIC=mCONFIG_TCP_CONG_CUBIC=yCONFIG_TCP_CONG_WESTWOOD=mCONFIG_TCP_CONG_HTCP=m
#CONFIG_TCP_CONG_HSTCPis not set
#CONFIG_TCP_CONG_HYBLAis not set
#CONFIG_TCP_CONG_VEGASis not set
#CONFIG_TCP_CONG_SCALABLEis not set
#CONFIG_TCP_CONG_LPis not set
#CONFIG_TCP_CONG_VENOis not set
#CONFIG_TCP_CONG_YEAHis not set
#CONFIG_TCP_CONG_ILLINOISis not set
#CONFIG_DEFAULT_BICis not setCONFIG_DEFAULT_CUBIC=y
#CONFIG_DEFAULT_HTCPis not set
#CONFIG_DEFAULT_VEGASis not set
#CONFIG_DEFAULT_WESTWOODis not set
#CONFIG_DEFAULT_RENOis not setCONFIG_DEFAULT_TCP_CONG="cubic"
#CONFIG_TCP_MD5SIGis not setCONFIG_IPV6=m
#CONFIG_IPV6_PRIVACYis not set
#CONFIG_IPV6_ROUTER_PREFis not set
#CONFIG_IPV6_OPTIMISTIC_DADis not set
#CONFIG_INET6_AHis not set
#CONFIG_INET6_ESPis not set
#CONFIG_INET6_IPCOMPis not set
#CONFIG_IPV6_MIP6is not set
#CONFIG_INET6_XFRM_TUNNELis not set
#CONFIG_INET6_TUNNELis not setCONFIG_INET6_XFRM_MODE_TRANSPORT=mCONFIG_INET6_XFRM_MODE_TUNNEL=mCONFIG_INET6_XFRM_MODE_BEET=m
#CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATIONis not setCONFIG_IPV6_SIT=mCONFIG_IPV6_NDISC_NODETYPE=y
#CONFIG_IPV6_TUNNELis not set
#CONFIG_IPV6_MULTIPLE_TABLESis not set
#CONFIG_IPV6_MROUTEis not set
#CONFIG_NETLABELis not setCONFIG_NETWORK_SECMARK=yCONFIG_NETFILTER=y
#CONFIG_NETFILTER_DEBUGis not setCONFIG_NETFILTER_ADVANCED=yCONFIG_BRIDGE_NETFILTER=y#
# Core Netfilter Configuration
#CONFIG_NETFILTER_NETLINK=m
#CONFIG_NETFILTER_NETLINK_QUEUEis not setCONFIG_NETFILTER_NETLINK_LOG=mCONFIG_NF_CONNTRACK=mCONFIG_NF_CT_ACCT=yCONFIG_NF_CONNTRACK_MARK=yCONFIG_NF_CONNTRACK_SECMARK=yCONFIG_NF_CONNTRACK_EVENTS=y
#CONFIG_NF_CT_PROTO_DCCPis not set
#CONFIG_NF_CT_PROTO_SCTPis not set
#CONFIG_NF_CT_PROTO_UDPLITEis not set
#CONFIG_NF_CONNTRACK_AMANDAis not setCONFIG_NF_CONNTRACK_FTP=m
#CONFIG_NF_CONNTRACK_H323is not set
#CONFIG_NF_CONNTRACK_IRCis not set
#CONFIG_NF_CONNTRACK_NETBIOS_NSis not set #CONFIG_NF_CONNTRACK_PPTPis not set
#CONFIG_NF_CONNTRACK_SANEis not set
#CONFIG_NF_CONNTRACK_SIPis not set
#CONFIG_NF_CONNTRACK_TFTPis not setCONFIG_NF_CT_NETLINK=m
#CONFIG_NETFILTER_TPROXYis not setCONFIG_NETFILTER_XTABLES=mCONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
#CONFIG_NETFILTER_XT_TARGET_CONNMARKis not set #CONFIG_NETFILTER_XT_TARGET_CONNSECMARKis not set #CONFIG_NETFILTER_XT_TARGET_DSCPis not setCONFIG_NETFILTER_XT_TARGET_HL=m
#CONFIG_NETFILTER_XT_TARGET_LEDis not setCONFIG_NETFILTER_XT_TARGET_MARK=mCONFIG_NETFILTER_XT_TARGET_NFLOG=mCONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
#CONFIG_NETFILTER_XT_TARGET_RATEESTis not set #CONFIG_NETFILTER_XT_TARGET_SECMARKis not set #CONFIG_NETFILTER_XT_TARGET_TCPMSSis not set #CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIPis not set #CONFIG_NETFILTER_XT_MATCH_CLUSTERis not set #CONFIG_NETFILTER_XT_MATCH_COMMENTis not set #CONFIG_NETFILTER_XT_MATCH_CONNBYTESis not set #CONFIG_NETFILTER_XT_MATCH_CONNLIMITis not setCONFIG_NETFILTER_XT_MATCH_CONNMARK=mCONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
#CONFIG_NETFILTER_XT_MATCH_DCCPis not set #CONFIG_NETFILTER_XT_MATCH_DSCPis not set #CONFIG_NETFILTER_XT_MATCH_ESPis not set #CONFIG_NETFILTER_XT_MATCH_HASHLIMITis not set #CONFIG_NETFILTER_XT_MATCH_HELPERis not setCONFIG_NETFILTER_XT_MATCH_HL=m
#CONFIG_NETFILTER_XT_MATCH_IPRANGEis not set #CONFIG_NETFILTER_XT_MATCH_LENGTHis not set #CONFIG_NETFILTER_XT_MATCH_LIMITis not set #CONFIG_NETFILTER_XT_MATCH_MACis not set #CONFIG_NETFILTER_XT_MATCH_MARKis not set #CONFIG_NETFILTER_XT_MATCH_MULTIPORTis not set #CONFIG_NETFILTER_XT_MATCH_OWNERis not setCONFIG_NETFILTER_XT_MATCH_POLICY=m
#CONFIG_NETFILTER_XT_MATCH_PHYSDEVis not set #CONFIG_NETFILTER_XT_MATCH_PKTTYPEis not set #CONFIG_NETFILTER_XT_MATCH_QUOTAis not set #CONFIG_NETFILTER_XT_MATCH_RATEESTis not set #CONFIG_NETFILTER_XT_MATCH_REALMis not set #CONFIG_NETFILTER_XT_MATCH_RECENTis not set #CONFIG_NETFILTER_XT_MATCH_SCTPis not setCONFIG_NETFILTER_XT_MATCH_STATE=m
#CONFIG_NETFILTER_XT_MATCH_STATISTICis not set #CONFIG_NETFILTER_XT_MATCH_STRINGis not set #CONFIG_NETFILTER_XT_MATCH_TCPMSSis not set #CONFIG_NETFILTER_XT_MATCH_TIMEis not set #CONFIG_NETFILTER_XT_MATCH_U32is not set #CONFIG_NETFILTER_XT_MATCH_OSFis not set #CONFIG_IP_VSis not set#
# IP: Netfilter Configuration
#CONFIG_NF_DEFRAG_IPV4=mCONFIG_NF_CONNTRACK_IPV4=mCONFIG_NF_CONNTRACK_PROC_COMPAT=y
#CONFIG_IP_NF_QUEUEis not setCONFIG_IP_NF_IPTABLES=mCONFIG_IP_NF_MATCH_ADDRTYPE=mCONFIG_IP_NF_MATCH_AH=mCONFIG_IP_NF_MATCH_ECN=mCONFIG_IP_NF_MATCH_TTL=mCONFIG_IP_NF_FILTER=mCONFIG_IP_NF_TARGET_REJECT=mCONFIG_IP_NF_TARGET_LOG=mCONFIG_IP_NF_TARGET_ULOG=mCONFIG_NF_NAT=mCONFIG_NF_NAT_NEEDED=yCONFIG_IP_NF_TARGET_MASQUERADE=m
#CONFIG_IP_NF_TARGET_NETMAPis not setCONFIG_IP_NF_TARGET_REDIRECT=m
#CONFIG_NF_NAT_SNMP_BASICis not setCONFIG_NF_NAT_FTP=m
#CONFIG_NF_NAT_IRCis not set
#CONFIG_NF_NAT_TFTPis not set
#CONFIG_NF_NAT_AMANDAis not set
#CONFIG_NF_NAT_PPTPis not set
#CONFIG_NF_NAT_H323is not set
#CONFIG_NF_NAT_SIPis not setCONFIG_IP_NF_MANGLE=m
#CONFIG_IP_NF_TARGET_CLUSTERIPis not setCONFIG_IP_NF_TARGET_ECN=mCONFIG_IP_NF_TARGET_TTL=m
#CONFIG_IP_NF_RAWis not set
#CONFIG_IP_NF_SECURITYis not setCONFIG_IP_NF_ARPTABLES=mCONFIG_IP_NF_ARPFILTER=mCONFIG_IP_NF_ARP_MANGLE=m#
# IPv6: Netfilter Configuration
#CONFIG_NF_CONNTRACK_IPV6=m
#CONFIG_IP6_NF_QUEUEis not setCONFIG_IP6_NF_IPTABLES=m
#CONFIG_IP6_NF_MATCH_AHis not set
#CONFIG_IP6_NF_MATCH_EUI64is not set
#CONFIG_IP6_NF_MATCH_FRAGis not set
#CONFIG_IP6_NF_MATCH_OPTSis not set
#CONFIG_IP6_NF_MATCH_HLis not set
#CONFIG_IP6_NF_MATCH_IPV6HEADERis not set
#CONFIG_IP6_NF_MATCH_MHis not set
#CONFIG_IP6_NF_MATCH_RTis not set
#CONFIG_IP6_NF_TARGET_HLis not set
#CONFIG_IP6_NF_TARGET_LOGis not set
#CONFIG_IP6_NF_FILTERis not set
#CONFIG_IP6_NF_MANGLEis not set
#CONFIG_IP6_NF_RAWis not set
#CONFIG_IP6_NF_SECURITYis not setCONFIG_BRIDGE_NF_EBTABLES=mCONFIG_BRIDGE_EBT_BROUTE=mCONFIG_BRIDGE_EBT_T_FILTER=mCONFIG_BRIDGE_EBT_T_NAT=mCONFIG_BRIDGE_EBT_802_3=mCONFIG_BRIDGE_EBT_AMONG=mCONFIG_BRIDGE_EBT_ARP=mCONFIG_BRIDGE_EBT_IP=m
#CONFIG_BRIDGE_EBT_IP6is not setCONFIG_BRIDGE_EBT_LIMIT=mCONFIG_BRIDGE_EBT_MARK=mCONFIG_BRIDGE_EBT_PKTTYPE=mCONFIG_BRIDGE_EBT_STP=mCONFIG_BRIDGE_EBT_VLAN=mCONFIG_BRIDGE_EBT_ARPREPLY=mCONFIG_BRIDGE_EBT_DNAT=mCONFIG_BRIDGE_EBT_MARK_T=mCONFIG_BRIDGE_EBT_REDIRECT=mCONFIG_BRIDGE_EBT_SNAT=mCONFIG_BRIDGE_EBT_LOG=mCONFIG_BRIDGE_EBT_ULOG=m
#CONFIG_BRIDGE_EBT_NFLOGis not set
#CONFIG_IP_DCCPis not setCONFIG_IP_SCTP=m
#CONFIG_SCTP_DBG_MSGis not set
#CONFIG_SCTP_DBG_OBJCNTis not setCONFIG_SCTP_HMAC_NONE=y
#CONFIG_SCTP_HMAC_SHA1is not set
#CONFIG_SCTP_HMAC_MD5is not set
#CONFIG_TIPCis not set
#CONFIG_ATMis not setCONFIG_STP=mCONFIG_BRIDGE=m
#CONFIG_NET_DSAis not set
#CONFIG_VLAN_8021Qis not set
#CONFIG_DECNETis not setCONFIG_LLC=m
#CONFIG_LLC2is not set
#CONFIG_IPXis not set
#CONFIG_ATALKis not set
#CONFIG_X25is not set
#CONFIG_LAPBis not set
#CONFIG_ECONETis not set
#CONFIG_WAN_ROUTERis not set
#CONFIG_PHONETis not set
#CONFIG_IEEE802154is not set
#CONFIG_NET_SCHEDis not set
#CONFIG_DCBis not set#
# Network testing
#CONFIG_NET_PKTGEN=m
#CONFIG_NET_TCPPROBEis not set
#CONFIG_NET_DROP_MONITORis not set
#CONFIG_HAMRADIOis not set
#CONFIG_CANis not setCONFIG_IRDA=m#
# IrDA protocols
#
#CONFIG_IRLANis not set
#CONFIG_IRCOMMis not set
#CONFIG_IRDA_ULTRAis not set#
# IrDA options
#
#CONFIG_IRDA_CACHE_LAST_LSAPis not set
#CONFIG_IRDA_FAST_RRis not set
#CONFIG_IRDA_DEBUGis not set#
# Infrared-port device drivers
##
# SIR device drivers
#
#CONFIG_IRTTY_SIRis not set#
# Dongle support
#
#CONFIG_KINGSUN_DONGLEis not set
#CONFIG_KSDAZZLE_DONGLEis not set
#CONFIG_KS959_DONGLEis not set#
# FIR device drivers
#
#CONFIG_USB_IRDAis not set
#CONFIG_SIGMATEL_FIRis not set
#CONFIG_NSC_FIRis not set
#CONFIG_WINBOND_FIRis not set
#CONFIG_SMC_IRCC_FIRis not set
#CONFIG_ALI_FIRis not set
#CONFIG_VLSI_FIRis not set
#CONFIG_VIA_FIRis not set
#CONFIG_MCS_FIRis not setCONFIG_BT=mCONFIG_BT_L2CAP=mCONFIG_BT_SCO=mCONFIG_BT_RFCOMM=mCONFIG_BT_RFCOMM_TTY=y
#CONFIG_BT_BNEPis not setCONFIG_BT_HIDP=m#
# Bluetooth device drivers
#CONFIG_BT_HCIBTUSB=m
#CONFIG_BT_HCIBTSDIOis not set
#CONFIG_BT_HCIUARTis not set
#CONFIG_BT_HCIBCM203Xis not set
#CONFIG_BT_HCIBPA10Xis not set
#CONFIG_BT_HCIBFUSBis not set
#CONFIG_BT_HCIDTL1is not set
#CONFIG_BT_HCIBT3Cis not set
#CONFIG_BT_HCIBLUECARDis not set
#CONFIG_BT_HCIBTUARTis not set
#CONFIG_BT_HCIVHCIis not set
#CONFIG_AF_RXRPCis not setCONFIG_WIRELESS=yCONFIG_CFG80211=m
#CONFIG_CFG80211_REG_DEBUGis not set
#CONFIG_CFG80211_DEBUGFSis not set
#CONFIG_WIRELESS_OLD_REGULATORYis not setCONFIG_WIRELESS_EXT=yCONFIG_WIRELESS_EXT_SYSFS=yCONFIG_LIB80211=m
#CONFIG_LIB80211_DEBUGis not setCONFIG_MAC80211=mCONFIG_MAC80211_DEFAULT_PS=yCONFIG_MAC80211_DEFAULT_PS_VALUE=1#
# Rate control algorithm selection
#
#CONFIG_MAC80211_RC_PIDis not setCONFIG_MAC80211_RC_MINSTREL=y
#CONFIG_MAC80211_RC_DEFAULT_PIDis not setCONFIG_MAC80211_RC_DEFAULT_MINSTREL=yCONFIG_MAC80211_RC_DEFAULT="minstrel"CONFIG_MAC80211_LEDS=y
#CONFIG_MAC80211_DEBUGFSis not set
#CONFIG_MAC80211_DEBUG_MENUis not set
#CONFIG_WIMAXis not setCONFIG_RFKILL=mCONFIG_RFKILL_LEDS=yCONFIG_RFKILL_INPUT=y
#CONFIG_NET_9Pis not set#
# Device Drivers
##
# Generic Driver Options
#CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"CONFIG_STANDALONE=yCONFIG_PREVENT_FIRMWARE_BUILD=yCONFIG_FW_LOADER=yCONFIG_FIRMWARE_IN_KERNEL=yCONFIG_EXTRA_FIRMWARE=""
#CONFIG_DEBUG_DRIVERis not set
#CONFIG_DEBUG_DEVRESis not set
#CONFIG_SYS_HYPERVISORis not setCONFIG_CONNECTOR=mCONFIG_MTD=m
#CONFIG_MTD_DEBUGis not setCONFIG_MTD_CONCAT=mCONFIG_MTD_PARTITIONS=yCONFIG_MTD_TESTS=mCONFIG_MTD_REDBOOT_PARTS=mCONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
#CONFIG_MTD_REDBOOT_PARTS_UNALLOCATEDis not set
#CONFIG_MTD_REDBOOT_PARTS_READONLYis not set
#CONFIG_MTD_AR7_PARTSis not set#
# User Modules And Translation Layers
#CONFIG_MTD_CHAR=mCONFIG_MTD_BLKDEVS=mCONFIG_MTD_BLOCK=m
#CONFIG_MTD_BLOCK_ROis not set
#CONFIG_FTLis not set
#CONFIG_NFTLis not set
#CONFIG_INFTLis not set
#CONFIG_RFD_FTLis not set
#CONFIG_SSFDCis not set
#CONFIG_MTD_OOPSis not set#
# RAM/ROM/Flash chip drivers
#
#CONFIG_MTD_CFIis not set
#CONFIG_MTD_JEDECPROBEis not setCONFIG_MTD_MAP_BANK_WIDTH_1=yCONFIG_MTD_MAP_BANK_WIDTH_2=yCONFIG_MTD_MAP_BANK_WIDTH_4=y
#CONFIG_MTD_MAP_BANK_WIDTH_8is not set
#CONFIG_MTD_MAP_BANK_WIDTH_16is not set
#CONFIG_MTD_MAP_BANK_WIDTH_32is not setCONFIG_MTD_CFI_I1=yCONFIG_MTD_CFI_I2=y
#CONFIG_MTD_CFI_I4is not set
#CONFIG_MTD_CFI_I8is not set
#CONFIG_MTD_RAMis not set
#CONFIG_MTD_ROMis not set
#CONFIG_MTD_ABSENTis not set#
# Mapping drivers for chip access
#
#CONFIG_MTD_COMPLEX_MAPPINGSis not set
#CONFIG_MTD_TS5500is not set
#CONFIG_MTD_INTEL_VR_NORis not set
#CONFIG_MTD_PLATRAMis not set#
# Self-contained MTD device drivers
#
#CONFIG_MTD_PMC551is not set
#CONFIG_MTD_SLRAMis not set
#CONFIG_MTD_PHRAMis not setCONFIG_MTD_MTDRAM=mCONFIG_MTDRAM_TOTAL_SIZE=4096CONFIG_MTDRAM_ERASE_SIZE=128CONFIG_MTD_BLOCK2MTD=m#
# Disk-On-Chip Device Drivers
#
#CONFIG_MTD_DOC2000is not set
#CONFIG_MTD_DOC2001is not set
#CONFIG_MTD_DOC2001PLUSis not set
#CONFIG_MTD_NANDis not set
#CONFIG_MTD_ONENANDis not set#
# LPDDR flash memory drivers
#
#CONFIG_MTD_LPDDRis not set#
# UBI - Unsorted block images
#
#CONFIG_MTD_UBIis not set
#CONFIG_PARPORTis not setCONFIG_PNP=yCONFIG_PNP_DEBUG_MESSAGES=y#
# Protocols
#CONFIG_PNPACPI=yCONFIG_BLK_DEV=yCONFIG_BLK_DEV_FD=m
#CONFIG_BLK_CPQ_DAis not set
#CONFIG_BLK_CPQ_CISS_DAis not set
#CONFIG_BLK_DEV_DAC960is not set
#CONFIG_BLK_DEV_UMEMis not set
#CONFIG_BLK_DEV_COW_COMMONis not setCONFIG_BLK_DEV_LOOP=mCONFIG_BLK_DEV_CRYPTOLOOP=mCONFIG_BLK_DEV_NBD=m
#CONFIG_BLK_DEV_SX8is not set
#CONFIG_BLK_DEV_UBis not setCONFIG_BLK_DEV_RAM=yCONFIG_BLK_DEV_RAM_COUNT=16CONFIG_BLK_DEV_RAM_SIZE=8192
#CONFIG_BLK_DEV_XIPis not setCONFIG_CDROM_PKTCDVD=mCONFIG_CDROM_PKTCDVD_BUFFERS=8
#CONFIG_CDROM_PKTCDVD_WCACHEis not set
#CONFIG_ATA_OVER_ETHis not setCONFIG_VIRTIO_BLK=m
#CONFIG_BLK_DEV_HDis not setCONFIG_MISC_DEVICES=y
#CONFIG_IBM_ASMis not set
#CONFIG_PHANTOMis not set
#CONFIG_SGI_IOC4is not set
#CONFIG_TIFM_COREis not set
#CONFIG_ICS932S401is not set
#CONFIG_ENCLOSURE_SERVICESis not set
#CONFIG_HP_ILOis not set
#CONFIG_ISL29003is not set
#CONFIG_C2PORTis not set#
# EEPROM support
#
#CONFIG_EEPROM_AT24is not set
#CONFIG_EEPROM_LEGACYis not set
#CONFIG_EEPROM_MAX6875is not set
#CONFIG_EEPROM_93CX6is not set
#CONFIG_CB710_COREis not setCONFIG_HAVE_IDE=y
#CONFIG_IDEis not set#
# SCSI device support
#CONFIG_RAID_ATTRS=mCONFIG_SCSI=yCONFIG_SCSI_DMA=y
#CONFIG_SCSI_TGTis not set
#CONFIG_SCSI_NETLINKis not set
#CONFIG_SCSI_PROC_FSis not set#
# SCSI support type (disk, tape, CD-ROM)
#CONFIG_BLK_DEV_SD=y
#CONFIG_CHR_DEV_STis not set
#CONFIG_CHR_DEV_OSSTis not setCONFIG_BLK_DEV_SR=m
#CONFIG_BLK_DEV_SR_VENDORis not setCONFIG_CHR_DEV_SG=yCONFIG_CHR_DEV_SCH=mCONFIG_SCSI_MULTI_LUN=yCONFIG_SCSI_CONSTANTS=yCONFIG_SCSI_LOGGING=yCONFIG_SCSI_SCAN_ASYNC=yCONFIG_SCSI_WAIT_SCAN=m#
# SCSI Transports
#CONFIG_SCSI_SPI_ATTRS=y
#CONFIG_SCSI_FC_ATTRSis not set
#CONFIG_SCSI_ISCSI_ATTRSis not set
#CONFIG_SCSI_SAS_LIBSASis not set
#CONFIG_SCSI_SRP_ATTRSis not set
#CONFIG_SCSI_LOWLEVELis not set
#CONFIG_SCSI_LOWLEVEL_PCMCIAis not set
#CONFIG_SCSI_DHis not set
#CONFIG_SCSI_OSD_INITIATORis not setCONFIG_ATA=y
#CONFIG_ATA_NONSTANDARDis not setCONFIG_ATA_ACPI=y
#CONFIG_SATA_PMPis not setCONFIG_SATA_AHCI=y
#CONFIG_SATA_SIL24is not setCONFIG_ATA_SFF=y
#CONFIG_SATA_SVWis not setCONFIG_ATA_PIIX=y
#CONFIG_SATA_MVis not set
#CONFIG_SATA_NVis not set
#CONFIG_PDC_ADMAis not set
#CONFIG_SATA_QSTORis not set
#CONFIG_SATA_PROMISEis not set
#CONFIG_SATA_SX4is not set
#CONFIG_SATA_SILis not set
#CONFIG_SATA_SISis not set
#CONFIG_SATA_ULIis not set
#CONFIG_SATA_VIAis not set
#CONFIG_SATA_VITESSEis not set
#CONFIG_SATA_INIC162Xis not setCONFIG_PATA_ACPI=m
#CONFIG_PATA_ALIis not set
#CONFIG_PATA_AMDis not set
#CONFIG_PATA_ARTOPis not set
#CONFIG_PATA_ATIIXPis not set
#CONFIG_PATA_CMD640_PCIis not set
#CONFIG_PATA_CMD64Xis not set
#CONFIG_PATA_CS5520is not set
#CONFIG_PATA_CS5530is not set
#CONFIG_PATA_CYPRESSis not set
#CONFIG_PATA_EFARis not setCONFIG_ATA_GENERIC=yCONFIG_PATA_HPT366=y
#CONFIG_PATA_HPT37Xis not set
#CONFIG_PATA_HPT3X2Nis not set
#CONFIG_PATA_HPT3X3is not set
#CONFIG_PATA_IT821Xis not set
#CONFIG_PATA_IT8213is not set
#CONFIG_PATA_JMICRONis not set
#CONFIG_PATA_TRIFLEXis not set
#CONFIG_PATA_MARVELLis not setCONFIG_PATA_MPIIX=yCONFIG_PATA_OLDPIIX=y
#CONFIG_PATA_NETCELLis not set
#CONFIG_PATA_NINJA32is not set
#CONFIG_PATA_NS87410is not set
#CONFIG_PATA_NS87415is not set
#CONFIG_PATA_OPTIis not set
#CONFIG_PATA_OPTIDMAis not set
#CONFIG_PATA_PCMCIAis not set
#CONFIG_PATA_PDC_OLDis not set
#CONFIG_PATA_RADISYSis not set
#CONFIG_PATA_RZ1000is not set
#CONFIG_PATA_SC1200is not set
#CONFIG_PATA_SERVERWORKSis not set
#CONFIG_PATA_PDC2027Xis not set
#CONFIG_PATA_SIL680is not set
#CONFIG_PATA_SISis not set
#CONFIG_PATA_VIAis not set
#CONFIG_PATA_WINBONDis not set
#CONFIG_PATA_PLATFORMis not set
#CONFIG_PATA_SCHis not setCONFIG_MD=yCONFIG_BLK_DEV_MD=mCONFIG_MD_LINEAR=mCONFIG_MD_RAID0=mCONFIG_MD_RAID1=m
#CONFIG_MD_RAID10is not setCONFIG_MD_RAID456=mCONFIG_MD_RAID6_PQ=m
#CONFIG_MD_MULTIPATHis not setCONFIG_MD_FAULTY=mCONFIG_BLK_DEV_DM=mCONFIG_DM_DEBUG=yCONFIG_DM_CRYPT=mCONFIG_DM_SNAPSHOT=mCONFIG_DM_MIRROR=mCONFIG_DM_LOG_USERSPACE=mCONFIG_DM_ZERO=mCONFIG_DM_MULTIPATH=m
#CONFIG_DM_MULTIPATH_QLis not set
#CONFIG_DM_MULTIPATH_STis not setCONFIG_DM_DELAY=mCONFIG_DM_UEVENT=yCONFIG_FUSION=yCONFIG_FUSION_SPI=y
#CONFIG_FUSION_FCis not set
#CONFIG_FUSION_SASis not setCONFIG_FUSION_MAX_SGE=128CONFIG_FUSION_CTL=y
#CONFIG_FUSION_LOGGINGis not set#
# IEEE 1394 (FireWire) support
##
# You can enable one or both FireWire driver stacks. ##
# See the help texts for more information. #
#CONFIG_FIREWIREis not set
#CONFIG_IEEE1394is not set
#CONFIG_I2Ois not set
#CONFIG_MACINTOSH_DRIVERSis not setCONFIG_NETDEVICES=yCONFIG_DUMMY=m
#CONFIG_BONDINGis not set
#CONFIG_MACVLANis not set
#CONFIG_EQUALIZERis not setCONFIG_TUN=mCONFIG_VETH=m
#CONFIG_NET_SB1000is not set
#CONFIG_ARCNETis not set
#CONFIG_PHYLIBis not setCONFIG_NET_ETHERNET=yCONFIG_MII=m
#CONFIG_HAPPYMEALis not set
#CONFIG_SUNGEMis not set
#CONFIG_CASSINIis not set
#CONFIG_NET_VENDOR_3COMis not set
#CONFIG_ETHOCis not set
#CONFIG_DNETis not set
#CONFIG_NET_TULIPis not set
#CONFIG_HP100is not set
#CONFIG_IBM_NEW_EMAC_ZMIIis not set
#CONFIG_IBM_NEW_EMAC_RGMIIis not set
#CONFIG_IBM_NEW_EMAC_TAHis not set
#CONFIG_IBM_NEW_EMAC_EMAC4is not set
#CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRLis not set #CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTATis not set #CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERRis not setCONFIG_NET_PCI=yCONFIG_PCNET32=m
#CONFIG_AMD8111_ETHis not set
#CONFIG_ADAPTEC_STARFIREis not set
#CONFIG_B44is not set
#CONFIG_FORCEDETHis not set
#CONFIG_E100is not set
#CONFIG_FEALNXis not set
#CONFIG_NATSEMIis not set
#CONFIG_NE2K_PCIis not setCONFIG_8139CP=m
#CONFIG_8139TOOis not set
#CONFIG_R6040is not set
#CONFIG_SIS900is not set
#CONFIG_EPIC100is not set
#CONFIG_SMSC9420is not set
#CONFIG_SUNDANCEis not set
#CONFIG_TLANis not set
#CONFIG_KS8842is not set
#CONFIG_VIA_RHINEis not set
#CONFIG_SC92031is not set
#CONFIG_ATL2is not setCONFIG_NETDEV_1000=y
#CONFIG_ACENICis not set
#CONFIG_DL2Kis not set
#CONFIG_E1000is not setCONFIG_E1000E=m
#CONFIG_IP1000is not set
#CONFIG_IGBis not set
#CONFIG_IGBVFis not set
#CONFIG_NS83820is not set
#CONFIG_HAMACHIis not set
#CONFIG_YELLOWFINis not set
#CONFIG_R8169is not set
#CONFIG_SIS190is not set
#CONFIG_SKGEis not set
#CONFIG_SKY2is not set
#CONFIG_VIA_VELOCITYis not set
#CONFIG_TIGON3is not set
#CONFIG_BNX2is not set
#CONFIG_CNICis not set
#CONFIG_QLA3XXXis not set
#CONFIG_ATL1is not set
#CONFIG_ATL1Eis not set
#CONFIG_ATL1Cis not set
#CONFIG_JMEis not set
#CONFIG_NETDEV_10000is not set
#CONFIG_TRis not set#
# Wireless LAN
#
#CONFIG_WLAN_PRE80211is not setCONFIG_WLAN_80211=y
#CONFIG_PCMCIA_RAYCSis not set
#CONFIG_LIBERTASis not set
#CONFIG_LIBERTAS_THINFIRMis not set
#CONFIG_AIROis not set
#CONFIG_ATMELis not set
#CONFIG_AT76C50X_USBis not set
#CONFIG_AIRO_CSis not set
#CONFIG_PCMCIA_WL3501is not set
#CONFIG_PRISM54is not set
#CONFIG_USB_ZD1201is not set
#CONFIG_USB_NET_RNDIS_WLANis not set
#CONFIG_RTL8180is not set
#CONFIG_RTL8187is not set
#CONFIG_ADM8211is not set
#CONFIG_MAC80211_HWSIMis not set
#CONFIG_MWL8Kis not set
#CONFIG_P54_COMMONis not set
#CONFIG_ATH5Kis not set
#CONFIG_ATH9Kis not set
#CONFIG_AR9170_USBis not set
#CONFIG_IPW2100is not set
#CONFIG_IPW2200is not setCONFIG_IWLWIFI=mCONFIG_IWLWIFI_LEDS=yCONFIG_IWLWIFI_SPECTRUM_MEASUREMENT=yCONFIG_IWLWIFI_DEBUG=y
#CONFIG_IWLAGNis not setCONFIG_IWL3945=mCONFIG_IWL3945_SPECTRUM_MEASUREMENT=y
#CONFIG_HOSTAPis not set
#CONFIG_B43is not set
#CONFIG_B43LEGACYis not set
#CONFIG_ZD1211RWis not set
#CONFIG_RT2X00is not set
#CONFIG_HERMESis not set
#CONFIG_IWMis not set#
# Enable WiMAX (Networking options) to see the WiMAX drivers ##
# USB Network Adapters
#
#CONFIG_USB_CATCis not set
#CONFIG_USB_KAWETHis not set
#CONFIG_USB_PEGASUSis not set
#CONFIG_USB_RTL8150is not set
#CONFIG_USB_USBNETis not setCONFIG_USB_HSO=m
#CONFIG_NET_PCMCIAis not set
#CONFIG_WANis not set
#CONFIG_FDDIis not set
#CONFIG_HIPPIis not set
#CONFIG_PPPis not set
#CONFIG_SLIPis not set
#CONFIG_NET_FCis not setCONFIG_NETCONSOLE=m
#CONFIG_NETCONSOLE_DYNAMICis not setCONFIG_NETPOLL=yCONFIG_NETPOLL_TRAP=yCONFIG_NET_POLL_CONTROLLER=yCONFIG_VIRTIO_NET=m
#CONFIG_ISDNis not set
#CONFIG_PHONEis not set#
# Input device support
#CONFIG_INPUT=y
#CONFIG_INPUT_FF_MEMLESSis not setCONFIG_INPUT_POLLDEV=y#
# Userland interfaces
#CONFIG_INPUT_MOUSEDEV=y
#CONFIG_INPUT_MOUSEDEV_PSAUXis not setCONFIG_INPUT_MOUSEDEV_SCREEN_X=1024CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
#CONFIG_INPUT_JOYDEVis not setCONFIG_INPUT_EVDEV=m
#CONFIG_INPUT_EVBUGis not set#
# Input Device Drivers
#CONFIG_INPUT_KEYBOARD=yCONFIG_KEYBOARD_ATKBD=y
#CONFIG_KEYBOARD_LKKBDis not set
#CONFIG_KEYBOARD_LM8323is not set
#CONFIG_KEYBOARD_NEWTONis not set
#CONFIG_KEYBOARD_STOWAWAYis not set
#CONFIG_KEYBOARD_SUNKBDis not set
#CONFIG_KEYBOARD_XTKBDis not setCONFIG_INPUT_MOUSE=yCONFIG_MOUSE_PS2=mCONFIG_MOUSE_PS2_ALPS=yCONFIG_MOUSE_PS2_LOGIPS2PP=yCONFIG_MOUSE_PS2_SYNAPTICS=yCONFIG_MOUSE_PS2_LIFEBOOK=yCONFIG_MOUSE_PS2_TRACKPOINT=y
#CONFIG_MOUSE_PS2_ELANTECHis not set
#CONFIG_MOUSE_PS2_TOUCHKITis not setCONFIG_MOUSE_SERIAL=m
#CONFIG_MOUSE_APPLETOUCHis not set
#CONFIG_MOUSE_BCM5974is not set
#CONFIG_MOUSE_VSXXXAAis not set
#CONFIG_MOUSE_SYNAPTICS_I2Cis not set
#CONFIG_INPUT_JOYSTICKis not set
#CONFIG_INPUT_TABLETis not set
#CONFIG_INPUT_TOUCHSCREENis not setCONFIG_INPUT_MISC=y
#CONFIG_INPUT_APANELis not set
#CONFIG_INPUT_ATLAS_BTNSis not set
#CONFIG_INPUT_ATI_REMOTEis not set
#CONFIG_INPUT_ATI_REMOTE2is not set
#CONFIG_INPUT_KEYSPAN_REMOTEis not set
#CONFIG_INPUT_POWERMATEis not set
#CONFIG_INPUT_YEALINKis not set
#CONFIG_INPUT_CM109is not setCONFIG_INPUT_UINPUT=m#
# Hardware I/O ports
#CONFIG_SERIO=yCONFIG_SERIO_I8042=yCONFIG_SERIO_SERPORT=m
#CONFIG_SERIO_CT82C710is not setCONFIG_SERIO_PCIPS2=mCONFIG_SERIO_LIBPS2=yCONFIG_SERIO_RAW=m
#CONFIG_GAMEPORTis not set#
# Character devices
#CONFIG_VT=yCONFIG_CONSOLE_TRANSLATIONS=yCONFIG_VT_CONSOLE=yCONFIG_HW_CONSOLE=y
#CONFIG_VT_HW_CONSOLE_BINDINGis not setCONFIG_DEVKMEM=y
#CONFIG_SERIAL_NONSTANDARDis not set
#CONFIG_NOZOMIis not set#
# Serial drivers
#CONFIG_SERIAL_8250=yCONFIG_SERIAL_8250_CONSOLE=yCONFIG_FIX_EARLYCON_MEM=yCONFIG_SERIAL_8250_PCI=yCONFIG_SERIAL_8250_PNP=y
#CONFIG_SERIAL_8250_CSis not setCONFIG_SERIAL_8250_NR_UARTS=16CONFIG_SERIAL_8250_RUNTIME_UARTS=4CONFIG_SERIAL_8250_EXTENDED=y
#CONFIG_SERIAL_8250_MANY_PORTSis not setCONFIG_SERIAL_8250_SHARE_IRQ=y
#CONFIG_SERIAL_8250_DETECT_IRQis not setCONFIG_SERIAL_8250_RSA=y#
# Non-8250 serial port support
#CONFIG_SERIAL_CORE=yCONFIG_SERIAL_CORE_CONSOLE=y
#CONFIG_SERIAL_JSMis not setCONFIG_UNIX98_PTYS=y
#CONFIG_DEVPTS_MULTIPLE_INSTANCESis not set
#CONFIG_LEGACY_PTYSis not setCONFIG_HVC_DRIVER=yCONFIG_VIRTIO_CONSOLE=m
#CONFIG_IPMI_HANDLERis not setCONFIG_HW_RANDOM=m
#CONFIG_HW_RANDOM_TIMERIOMEMis not setCONFIG_HW_RANDOM_INTEL=m
#CONFIG_HW_RANDOM_AMDis not set
#CONFIG_HW_RANDOM_VIAis not setCONFIG_HW_RANDOM_VIRTIO=mCONFIG_NVRAM=m
#CONFIG_R3964is not set
#CONFIG_APPLICOMis not set#
# PCMCIA character devices
#
#CONFIG_SYNCLINK_CSis not set
#CONFIG_CARDMAN_4000is not set
#CONFIG_CARDMAN_4040is not set
#CONFIG_IPWIRELESSis not set
#CONFIG_MWAVEis not set
#CONFIG_PC8736x_GPIOis not set
#CONFIG_RAW_DRIVERis not setCONFIG_HPET=yCONFIG_HPET_MMAP=yCONFIG_HANGCHECK_TIMER=m
#CONFIG_TCG_TPMis not set
#CONFIG_TELCLOCKis not setCONFIG_DEVPORT=yCONFIG_I2C=mCONFIG_I2C_BOARDINFO=yCONFIG_I2C_CHARDEV=mCONFIG_I2C_HELPER_AUTO=yCONFIG_I2C_ALGOBIT=m#
# I2C Hardware Bus support
##
# PC SMBus host controller drivers
#
#CONFIG_I2C_ALI1535is not set
#CONFIG_I2C_ALI1563is not set
#CONFIG_I2C_ALI15X3is not set
#CONFIG_I2C_AMD756is not set
#CONFIG_I2C_AMD8111is not setCONFIG_I2C_I801=mCONFIG_I2C_ISCH=mCONFIG_I2C_PIIX4=m
#CONFIG_I2C_NFORCE2is not set
#CONFIG_I2C_SIS5595is not set
#CONFIG_I2C_SIS630is not set
#CONFIG_I2C_SIS96Xis not set
#CONFIG_I2C_VIAis not set
#CONFIG_I2C_VIAPROis not set#
# I2C system bus drivers (mostly embedded / system-on-chip) #
#CONFIG_I2C_OCORESis not set
#CONFIG_I2C_SIMTECis not set#
# External I2C/SMBus adapter drivers
#
#CONFIG_I2C_PARPORT_LIGHTis not set
#CONFIG_I2C_TAOS_EVMis not setCONFIG_I2C_TINY_USB=m#
# Graphics adapter I2C/DDC channel drivers
#
#CONFIG_I2C_VOODOO3is not set#
# Other I2C/SMBus bus drivers
#
#CONFIG_I2C_PCA_PLATFORMis not set
#CONFIG_I2C_STUBis not set#
# Miscellaneous I2C Chip support
#
#CONFIG_DS1682is not set
#CONFIG_SENSORS_PCF8574is not set
#CONFIG_PCF8575is not set
#CONFIG_SENSORS_PCA9539is not set
#CONFIG_SENSORS_TSL2550is not set
#CONFIG_I2C_DEBUG_COREis not setCONFIG_I2C_DEBUG_ALGO=y
#CONFIG_I2C_DEBUG_BUSis not setCONFIG_I2C_DEBUG_CHIP=y
#CONFIG_SPIis not set#
# PPS support
#
#CONFIG_PPSis not setCONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
#CONFIG_GPIOLIBis not set
#CONFIG_W1is not setCONFIG_POWER_SUPPLY=y
#CONFIG_POWER_SUPPLY_DEBUGis not set
#CONFIG_PDA_POWERis not set
#CONFIG_BATTERY_DS2760is not set
#CONFIG_BATTERY_DS2782is not set
#CONFIG_BATTERY_BQ27x00is not set
#CONFIG_BATTERY_MAX17040is not setCONFIG_HWMON=y
#CONFIG_HWMON_VIDis not set
#CONFIG_SENSORS_ABITUGURUis not set
#CONFIG_SENSORS_ABITUGURU3is not set
#CONFIG_SENSORS_AD7414is not set
#CONFIG_SENSORS_AD7418is not set
#CONFIG_SENSORS_ADM1021is not set
#CONFIG_SENSORS_ADM1025is not set
#CONFIG_SENSORS_ADM1026is not set
#CONFIG_SENSORS_ADM1029is not set
#CONFIG_SENSORS_ADM1031is not set
#CONFIG_SENSORS_ADM9240is not set
#CONFIG_SENSORS_ADT7462is not set
#CONFIG_SENSORS_ADT7470is not set
#CONFIG_SENSORS_ADT7473is not set
#CONFIG_SENSORS_ADT7475is not set
#CONFIG_SENSORS_K8TEMPis not set
#CONFIG_SENSORS_ASB100is not set
#CONFIG_SENSORS_ATK0110is not set
#CONFIG_SENSORS_ATXP1is not set
#CONFIG_SENSORS_DS1621is not set
#CONFIG_SENSORS_I5K_AMBis not set
#CONFIG_SENSORS_F71805Fis not set
#CONFIG_SENSORS_F71882FGis not set
#CONFIG_SENSORS_F75375Sis not set
#CONFIG_SENSORS_FSCHERis not set
#CONFIG_SENSORS_FSCPOSis not set
#CONFIG_SENSORS_FSCHMDis not set
#CONFIG_SENSORS_G760Ais not set
#CONFIG_SENSORS_GL518SMis not set
#CONFIG_SENSORS_GL520SMis not set
#CONFIG_SENSORS_CORETEMPis not set
#CONFIG_SENSORS_IT87is not set
#CONFIG_SENSORS_LM63is not set
#CONFIG_SENSORS_LM75is not set
#CONFIG_SENSORS_LM77is not set
#CONFIG_SENSORS_LM78is not set
#CONFIG_SENSORS_LM80is not set
#CONFIG_SENSORS_LM83is not set
#CONFIG_SENSORS_LM85is not set
#CONFIG_SENSORS_LM87is not set
#CONFIG_SENSORS_LM90is not set
#CONFIG_SENSORS_LM92is not set
#CONFIG_SENSORS_LM93is not set
#CONFIG_SENSORS_LTC4215is not set
#CONFIG_SENSORS_LTC4245is not set
#CONFIG_SENSORS_LM95241is not set
#CONFIG_SENSORS_MAX1619is not set
#CONFIG_SENSORS_MAX6650is not set
#CONFIG_SENSORS_PC87360is not set
#CONFIG_SENSORS_PC87427is not set
#CONFIG_SENSORS_PCF8591is not set
#CONFIG_SENSORS_SIS5595is not set
#CONFIG_SENSORS_DME1737is not set
#CONFIG_SENSORS_SMSC47M1is not set
#CONFIG_SENSORS_SMSC47M192is not set
#CONFIG_SENSORS_SMSC47B397is not set
#CONFIG_SENSORS_ADS7828is not set
#CONFIG_SENSORS_THMC50is not set
#CONFIG_SENSORS_TMP401is not set
#CONFIG_SENSORS_VIA686Ais not set
#CONFIG_SENSORS_VT1211is not set
#CONFIG_SENSORS_VT8231is not set
#CONFIG_SENSORS_W83781Dis not set
#CONFIG_SENSORS_W83791Dis not set
#CONFIG_SENSORS_W83792Dis not set
#CONFIG_SENSORS_W83793is not set
#CONFIG_SENSORS_W83L785TSis not set
#CONFIG_SENSORS_W83L786NGis not set
#CONFIG_SENSORS_W83627HFis not set
#CONFIG_SENSORS_W83627EHFis not setCONFIG_SENSORS_HDAPS=y
#CONFIG_SENSORS_LIS3LV02Dis not set
#CONFIG_SENSORS_APPLESMCis not set
#CONFIG_HWMON_DEBUG_CHIPis not setCONFIG_THERMAL=y
#CONFIG_THERMAL_HWMONis not setCONFIG_WATCHDOG=y
#CONFIG_WATCHDOG_NOWAYOUTis not set#
# Watchdog Device Drivers
#CONFIG_SOFT_WATCHDOG=m
#CONFIG_ACQUIRE_WDTis not set
#CONFIG_ADVANTECH_WDTis not set
#CONFIG_ALIM1535_WDTis not set
#CONFIG_ALIM7101_WDTis not set
#CONFIG_SC520_WDTis not set
#CONFIG_EUROTECH_WDTis not set
#CONFIG_IB700_WDTis not set
#CONFIG_IBMASRis not set
#CONFIG_WAFER_WDTis not set
#CONFIG_I6300ESB_WDTis not setCONFIG_ITCO_WDT=mCONFIG_ITCO_VENDOR_SUPPORT=y
#CONFIG_IT8712F_WDTis not set
#CONFIG_IT87_WDTis not set
#CONFIG_HP_WATCHDOGis not set
#CONFIG_SC1200_WDTis not set
#CONFIG_PC87413_WDTis not set
#CONFIG_60XX_WDTis not set
#CONFIG_SBC8360_WDTis not set
#CONFIG_CPU5_WDTis not set
#CONFIG_SMSC_SCH311X_WDTis not set
#CONFIG_SMSC37B787_WDTis not set
#CONFIG_W83627HF_WDTis not set
#CONFIG_W83697HF_WDTis not set
#CONFIG_W83697UG_WDTis not set
#CONFIG_W83877F_WDTis not set
#CONFIG_W83977F_WDTis not set
#CONFIG_MACHZ_WDTis not set
#CONFIG_SBC_EPX_C3_WATCHDOGis not set#
# PCI-based Watchdog Cards
#
#CONFIG_PCIPCWATCHDOGis not set
#CONFIG_WDTPCIis not set#
# USB-based Watchdog Cards
#
#CONFIG_USBPCWATCHDOGis not setCONFIG_SSB_POSSIBLE=y#
# Sonics Silicon Backplane
#
#CONFIG_SSBis not set#
# Multifunction device drivers
#
#CONFIG_MFD_COREis not set
#CONFIG_MFD_SM501is not set
#CONFIG_HTC_PASIC3is not set
#CONFIG_MFD_TMIOis not set
#CONFIG_MFD_WM8400is not set
#CONFIG_MFD_WM8350_I2Cis not set
#CONFIG_MFD_PCF50633is not set
#CONFIG_AB3100_COREis not setCONFIG_REGULATOR=yCONFIG_REGULATOR_DEBUG=y
#CONFIG_REGULATOR_FIXED_VOLTAGEis not setCONFIG_REGULATOR_VIRTUAL_CONSUMER=m
#CONFIG_REGULATOR_USERSPACE_CONSUMERis not set
#CONFIG_REGULATOR_BQ24022is not set
#CONFIG_REGULATOR_MAX1586is not set
#CONFIG_REGULATOR_LP3971is not setCONFIG_MEDIA_SUPPORT=m#
# Multimedia core support
#CONFIG_VIDEO_DEV=mCONFIG_VIDEO_V4L2_COMMON=mCONFIG_VIDEO_ALLOW_V4L1=yCONFIG_VIDEO_V4L1_COMPAT=yCONFIG_DVB_CORE=mCONFIG_VIDEO_MEDIA=m#
# Multimedia drivers
#CONFIG_MEDIA_ATTACH=yCONFIG_MEDIA_TUNER=mCONFIG_MEDIA_TUNER_CUSTOMISE=yCONFIG_MEDIA_TUNER_SIMPLE=m
#CONFIG_MEDIA_TUNER_TDA8290is not set
#CONFIG_MEDIA_TUNER_TDA827Xis not set
#CONFIG_MEDIA_TUNER_TDA18271is not setCONFIG_MEDIA_TUNER_TDA9887=m
#CONFIG_MEDIA_TUNER_TEA5761is not set
#CONFIG_MEDIA_TUNER_TEA5767is not set
#CONFIG_MEDIA_TUNER_MT20XXis not set
#CONFIG_MEDIA_TUNER_MT2060is not setCONFIG_MEDIA_TUNER_MT2266=m
#CONFIG_MEDIA_TUNER_MT2131is not set
#CONFIG_MEDIA_TUNER_QT1010is not set
#CONFIG_MEDIA_TUNER_XC2028is not set
#CONFIG_MEDIA_TUNER_XC5000is not set
#CONFIG_MEDIA_TUNER_MXL5005Sis not set
#CONFIG_MEDIA_TUNER_MXL5007Tis not set
#CONFIG_MEDIA_TUNER_MC44S803is not setCONFIG_VIDEO_V4L2=mCONFIG_VIDEO_V4L1=mCONFIG_VIDEOBUF_GEN=mCONFIG_VIDEOBUF_DMA_SG=mCONFIG_VIDEOBUF_VMALLOC=mCONFIG_VIDEO_IR=mCONFIG_VIDEO_TVEEPROM=mCONFIG_VIDEO_TUNER=mCONFIG_VIDEO_CAPTURE_DRIVERS=yCONFIG_VIDEO_ADV_DEBUG=y
#CONFIG_VIDEO_FIXED_MINOR_RANGESis not setCONFIG_VIDEO_HELPER_CHIPS_AUTO=yCONFIG_VIDEO_IR_I2C=mCONFIG_VIDEO_SAA6588=mCONFIG_VIDEO_VIVI=m
#CONFIG_VIDEO_BT848is not set
#CONFIG_VIDEO_CPIAis not set
#CONFIG_VIDEO_CPIA2is not set
#CONFIG_VIDEO_SAA5246Ais not set
#CONFIG_VIDEO_SAA5249is not set
#CONFIG_VIDEO_STRADISis not set
#CONFIG_VIDEO_ZORANis not setCONFIG_VIDEO_SAA7134=mCONFIG_VIDEO_SAA7134_ALSA=m
#CONFIG_VIDEO_SAA7134_DVBis not set
#CONFIG_VIDEO_MXBis not set
#CONFIG_VIDEO_HEXIUM_ORIONis not set
#CONFIG_VIDEO_HEXIUM_GEMINIis not set
#CONFIG_VIDEO_CX88is not set
#CONFIG_VIDEO_CX23885is not set
#CONFIG_VIDEO_AU0828is not set
#CONFIG_VIDEO_IVTVis not set
#CONFIG_VIDEO_CX18is not set
#CONFIG_VIDEO_CAFE_CCICis not set
#CONFIG_SOC_CAMERAis not setCONFIG_V4L_USB_DRIVERS=y
#CONFIG_USB_VIDEO_CLASSis not setCONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
#CONFIG_USB_GSPCAis not set
#CONFIG_VIDEO_PVRUSB2is not set
#CONFIG_VIDEO_HDPVRis not set
#CONFIG_VIDEO_EM28XXis not set
#CONFIG_VIDEO_CX231XXis not set
#CONFIG_VIDEO_USBVISIONis not set
#CONFIG_USB_VICAMis not set
#CONFIG_USB_IBMCAMis not set
#CONFIG_USB_KONICAWCis not set
#CONFIG_USB_QUICKCAM_MESSENGERis not set
#CONFIG_USB_ET61X251is not set
#CONFIG_VIDEO_OVCAMCHIPis not set
#CONFIG_USB_OV511is not set
#CONFIG_USB_SE401is not set
#CONFIG_USB_SN9C102is not set
#CONFIG_USB_STV680is not set
#CONFIG_USB_ZC0301is not set
#CONFIG_USB_PWCis not set
#CONFIG_USB_PWC_INPUT_EVDEVis not set
#CONFIG_USB_ZR364XXis not set
#CONFIG_USB_STKWEBCAMis not set
#CONFIG_USB_S2255is not setCONFIG_RADIO_ADAPTERS=y
#CONFIG_RADIO_GEMTEK_PCIis not set
#CONFIG_RADIO_MAXIRADIOis not set
#CONFIG_RADIO_MAESTROis not set
#CONFIG_USB_DSBRis not set
#CONFIG_USB_SI470Xis not set
#CONFIG_USB_MR800is not set
#CONFIG_RADIO_TEA5764is not setCONFIG_DVB_DYNAMIC_MINORS=yCONFIG_DVB_CAPTURE_DRIVERS=y#
# Supported SAA7146 based PCI Adapters
#
#CONFIG_TTPCI_EEPROMis not set
#CONFIG_DVB_AV7110is not set
#CONFIG_DVB_BUDGET_COREis not set#
# Supported USB Adapters
#CONFIG_DVB_USB=mCONFIG_DVB_USB_DEBUG=y
#CONFIG_DVB_USB_A800is not set
#CONFIG_DVB_USB_DIBUSB_MBis not set
#CONFIG_DVB_USB_DIBUSB_MCis not setCONFIG_DVB_USB_DIB0700=m
#CONFIG_DVB_USB_UMT_010is not set
#CONFIG_DVB_USB_CXUSBis not set
#CONFIG_DVB_USB_M920Xis not set
#CONFIG_DVB_USB_GL861is not set
#CONFIG_DVB_USB_AU6610is not set
#CONFIG_DVB_USB_DIGITVis not set
#CONFIG_DVB_USB_VP7045is not set
#CONFIG_DVB_USB_VP702Xis not set
#CONFIG_DVB_USB_GP8PSKis not setCONFIG_DVB_USB_NOVA_T_USB2=m
#CONFIG_DVB_USB_TTUSB2is not set
#CONFIG_DVB_USB_DTT200Uis not set
#CONFIG_DVB_USB_OPERA1is not set
#CONFIG_DVB_USB_AF9005is not set
#CONFIG_DVB_USB_DW2102is not set
#CONFIG_DVB_USB_CINERGY_T2is not set
#CONFIG_DVB_USB_ANYSEEis not set
#CONFIG_DVB_USB_DTV5100is not setCONFIG_DVB_USB_AF9015=m
#CONFIG_DVB_USB_CE6230is not set
#CONFIG_DVB_TTUSB_BUDGETis not set
#CONFIG_DVB_TTUSB_DECis not set
#CONFIG_DVB_SIANO_SMS1XXXis not set#
# Supported FlexCopII (B2C2) Adapters
#
#CONFIG_DVB_B2C2_FLEXCOPis not set#
# Supported BT878 Adapters
##
# Supported Pluto2 Adapters
#
#CONFIG_DVB_PLUTO2is not set#
# Supported SDMC DM1105 Adapters
#
#CONFIG_DVB_DM1105is not set#
# Supported DVB Frontends
#CONFIG_DVB_FE_CUSTOMISE=y#
# Customise DVB Frontends
##
# Multistandard (satellite) frontends
#
#CONFIG_DVB_STB0899is not set
#CONFIG_DVB_STB6100is not set
#CONFIG_DVB_STV090xis not set
#CONFIG_DVB_STV6110xis not set#
# DVB-S (satellite) frontends
#
#CONFIG_DVB_CX24110is not set
#CONFIG_DVB_CX24123is not set
#CONFIG_DVB_MT312is not set
#CONFIG_DVB_ZL10036is not set
#CONFIG_DVB_S5H1420is not set
#CONFIG_DVB_STV0288is not set
#CONFIG_DVB_STB6000is not set
#CONFIG_DVB_STV0299is not set
#CONFIG_DVB_STV6110is not set
#CONFIG_DVB_STV0900is not set
#CONFIG_DVB_TDA8083is not set
#CONFIG_DVB_TDA10086is not setCONFIG_DVB_TDA8261=m
#CONFIG_DVB_VES1X93is not set
#CONFIG_DVB_TUNER_ITD1000is not set
#CONFIG_DVB_TUNER_CX24113is not set
#CONFIG_DVB_TDA826Xis not set
#CONFIG_DVB_TUA6100is not set
#CONFIG_DVB_CX24116is not setCONFIG_DVB_SI21XX=m#
# DVB-T (terrestrial) frontends
#
#CONFIG_DVB_SP8870is not set
#CONFIG_DVB_SP887Xis not set
#CONFIG_DVB_CX22700is not set
#CONFIG_DVB_CX22702is not set
#CONFIG_DVB_DRX397XDis not set
#CONFIG_DVB_L64781is not set
#CONFIG_DVB_TDA1004Xis not set
#CONFIG_DVB_NXT6000is not set
#CONFIG_DVB_MT352is not set
#CONFIG_DVB_ZL10353is not set
#CONFIG_DVB_DIB3000MBis not setCONFIG_DVB_DIB3000MC=mCONFIG_DVB_DIB7000M=mCONFIG_DVB_DIB7000P=m
#CONFIG_DVB_TDA10048is not setCONFIG_DVB_AF9013=m#
# DVB-C (cable) frontends
#
#CONFIG_DVB_VES1820is not set
#CONFIG_DVB_TDA10021is not set
#CONFIG_DVB_TDA10023is not set
#CONFIG_DVB_STV0297is not set#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends #
#CONFIG_DVB_NXT200Xis not set
#CONFIG_DVB_OR51211is not set
#CONFIG_DVB_OR51132is not set
#CONFIG_DVB_BCM3510is not set
#CONFIG_DVB_LGDT330Xis not set
#CONFIG_DVB_LGDT3304is not set
#CONFIG_DVB_LGDT3305is not set
#CONFIG_DVB_S5H1409is not set
#CONFIG_DVB_AU8522is not set
#CONFIG_DVB_S5H1411is not set#
# ISDB-T (terrestrial) frontends
#
#CONFIG_DVB_S921is not set#
# Digital terrestrial only tuners/PLL
#CONFIG_DVB_PLL=mCONFIG_DVB_TUNER_DIB0070=m#
# SEC control devices for DVB-S
#
#CONFIG_DVB_LNBP21is not set
#CONFIG_DVB_ISL6405is not set
#CONFIG_DVB_ISL6421is not set
#CONFIG_DVB_ISL6423is not set
#CONFIG_DVB_LGS8GL5is not set
#CONFIG_DVB_LGS8GXXis not set#
# Tools to develop new frontends
#CONFIG_DVB_DUMMY_FE=m
#CONFIG_DABis not set#
# Graphics support
#CONFIG_AGP=yCONFIG_AGP_AMD64=yCONFIG_AGP_INTEL=m
#CONFIG_AGP_SISis not set
#CONFIG_AGP_VIAis not setCONFIG_DRM=m
#CONFIG_DRM_TDFXis not set
#CONFIG_DRM_R128is not set
#CONFIG_DRM_RADEONis not set
#CONFIG_DRM_I810is not set
#CONFIG_DRM_I830is not setCONFIG_DRM_I915=m
#CONFIG_DRM_I915_KMSis not setCONFIG_DRM_MGA=m
#CONFIG_DRM_SISis not set
#CONFIG_DRM_VIAis not set
#CONFIG_DRM_SAVAGEis not set
#CONFIG_VGASTATEis not setCONFIG_VIDEO_OUTPUT_CONTROL=mCONFIG_FB=yCONFIG_FIRMWARE_EDID=yCONFIG_FB_DDC=mCONFIG_FB_BOOT_VESA_SUPPORT=yCONFIG_FB_CFB_FILLRECT=yCONFIG_FB_CFB_COPYAREA=yCONFIG_FB_CFB_IMAGEBLIT=y
#CONFIG_FB_CFB_REV_PIXELS_IN_BYTEis not set
#CONFIG_FB_SYS_FILLRECTis not set
#CONFIG_FB_SYS_COPYAREAis not set
#CONFIG_FB_SYS_IMAGEBLITis not set
#CONFIG_FB_FOREIGN_ENDIANis not set
#CONFIG_FB_SYS_FOPSis not set
#CONFIG_FB_SVGALIBis not set
#CONFIG_FB_MACMODESis not set
#CONFIG_FB_BACKLIGHTis not setCONFIG_FB_MODE_HELPERS=yCONFIG_FB_TILEBLITTING=y#
# Frame buffer hardware drivers
#
#CONFIG_FB_CIRRUSis not set
#CONFIG_FB_PM2is not set
#CONFIG_FB_CYBER2000is not set
#CONFIG_FB_ARCis not set
#CONFIG_FB_ASILIANTis not set
#CONFIG_FB_IMSTTis not set
#CONFIG_FB_VGA16is not set
#CONFIG_FB_UVESAis not setCONFIG_FB_VESA=yCONFIG_FB_EFI=y
#CONFIG_FB_N411is not set
#CONFIG_FB_HGAis not set
#CONFIG_FB_S1D13XXXis not set
#CONFIG_FB_NVIDIAis not set
#CONFIG_FB_RIVAis not set
#CONFIG_FB_LE80578is not setCONFIG_FB_INTEL=m
#CONFIG_FB_INTEL_DEBUGis not setCONFIG_FB_INTEL_I2C=y
#CONFIG_FB_MATROXis not set
#CONFIG_FB_RADEONis not set
#CONFIG_FB_ATY128is not set
#CONFIG_FB_ATYis not set
#CONFIG_FB_S3is not set
#CONFIG_FB_SAVAGEis not set
#CONFIG_FB_SISis not set
#CONFIG_FB_VIAis not set
#CONFIG_FB_NEOMAGICis not set
#CONFIG_FB_KYROis not set
#CONFIG_FB_3DFXis not set
#CONFIG_FB_VOODOO1is not set
#CONFIG_FB_VT8623is not set
#CONFIG_FB_TRIDENTis not set
#CONFIG_FB_ARKis not set
#CONFIG_FB_PM3is not set
#CONFIG_FB_CARMINEis not set
#CONFIG_FB_GEODEis not set
#CONFIG_FB_VIRTUALis not set
#CONFIG_FB_METRONOMEis not set
#CONFIG_FB_MB862XXis not set
#CONFIG_FB_BROADSHEETis not setCONFIG_BACKLIGHT_LCD_SUPPORT=yCONFIG_LCD_CLASS_DEVICE=m
#CONFIG_LCD_ILI9320is not setCONFIG_LCD_PLATFORM=mCONFIG_BACKLIGHT_CLASS_DEVICE=mCONFIG_BACKLIGHT_GENERIC=m
#CONFIG_BACKLIGHT_PROGEARis not set
#CONFIG_BACKLIGHT_MBP_NVIDIAis not set
#CONFIG_BACKLIGHT_SAHARAis not set#
# Display device support
#CONFIG_DISPLAY_SUPPORT=m#
# Display hardware drivers
##
# Console display driver support
#CONFIG_VGA_CONSOLE=y
#CONFIG_VGACON_SOFT_SCROLLBACKis not setCONFIG_DUMMY_CONSOLE=yCONFIG_FRAMEBUFFER_CONSOLE=y
#CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARYis not set #CONFIG_FRAMEBUFFER_CONSOLE_ROTATIONis not set #CONFIG_FONTSis not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=yCONFIG_LOGO=yCONFIG_LOGO_LINUX_MONO=yCONFIG_LOGO_LINUX_VGA16=yCONFIG_LOGO_LINUX_CLUT224=yCONFIG_SOUND=mCONFIG_SOUND_OSS_CORE=yCONFIG_SND=mCONFIG_SND_TIMER=mCONFIG_SND_PCM=mCONFIG_SND_HWDEP=mCONFIG_SND_RAWMIDI=mCONFIG_SND_JACK=yCONFIG_SND_SEQUENCER=m
#CONFIG_SND_SEQ_DUMMYis not setCONFIG_SND_OSSEMUL=yCONFIG_SND_MIXER_OSS=mCONFIG_SND_PCM_OSS=mCONFIG_SND_PCM_OSS_PLUGINS=yCONFIG_SND_SEQUENCER_OSS=yCONFIG_SND_HRTIMER=mCONFIG_SND_SEQ_HRTIMER_DEFAULT=yCONFIG_SND_DYNAMIC_MINORS=y
#CONFIG_SND_SUPPORT_OLD_APIis not setCONFIG_SND_VERBOSE_PROCFS=y
#CONFIG_SND_VERBOSE_PRINTKis not set
#CONFIG_SND_DEBUGis not setCONFIG_SND_VMASTER=yCONFIG_SND_RAWMIDI_SEQ=m
#CONFIG_SND_OPL3_LIB_SEQis not set
#CONFIG_SND_OPL4_LIB_SEQis not set
#CONFIG_SND_SBAWE_SEQis not setCONFIG_SND_EMU10K1_SEQ=mCONFIG_SND_MPU401_UART=mCONFIG_SND_AC97_CODEC=mCONFIG_SND_DRIVERS=yCONFIG_SND_DUMMY=m
#CONFIG_SND_VIRMIDIis not set
#CONFIG_SND_MTPAVis not setCONFIG_SND_SERIAL_U16550=mCONFIG_SND_MPU401=mCONFIG_SND_AC97_POWER_SAVE=yCONFIG_SND_AC97_POWER_SAVE_DEFAULT=500CONFIG_SND_PCI=y
#CONFIG_SND_AD1889is not set
#CONFIG_SND_ALS300is not set
#CONFIG_SND_ALS4000is not set
#CONFIG_SND_ALI5451is not set
#CONFIG_SND_ATIIXPis not set
#CONFIG_SND_ATIIXP_MODEMis not set
#CONFIG_SND_AU8810is not set
#CONFIG_SND_AU8820is not set
#CONFIG_SND_AU8830is not set
#CONFIG_SND_AW2is not set
#CONFIG_SND_AZT3328is not set
#CONFIG_SND_BT87Xis not set
#CONFIG_SND_CA0106is not set
#CONFIG_SND_CMIPCIis not set
#CONFIG_SND_OXYGENis not set
#CONFIG_SND_CS4281is not set
#CONFIG_SND_CS46XXis not set
#CONFIG_SND_CS5530is not set
#CONFIG_SND_CTXFIis not set
#CONFIG_SND_DARLA20is not set
#CONFIG_SND_GINA20is not set
#CONFIG_SND_LAYLA20is not set
#CONFIG_SND_DARLA24is not set
#CONFIG_SND_GINA24is not set
#CONFIG_SND_LAYLA24is not set
#CONFIG_SND_MONAis not set
#CONFIG_SND_MIAis not set
#CONFIG_SND_ECHO3Gis not set
#CONFIG_SND_INDIGOis not set
#CONFIG_SND_INDIGOIOis not set
#CONFIG_SND_INDIGODJis not set
#CONFIG_SND_INDIGOIOXis not set
#CONFIG_SND_INDIGODJXis not setCONFIG_SND_EMU10K1=m
#CONFIG_SND_EMU10K1Xis not setCONFIG_SND_ENS1370=mCONFIG_SND_ENS1371=m
#CONFIG_SND_ES1938is not set
#CONFIG_SND_ES1968is not set
#CONFIG_SND_FM801is not setCONFIG_SND_HDA_INTEL=m
#CONFIG_SND_HDA_HWDEPis not set
#CONFIG_SND_HDA_INPUT_BEEPis not setCONFIG_SND_HDA_INPUT_JACK=yCONFIG_SND_HDA_CODEC_REALTEK=yCONFIG_SND_HDA_CODEC_ANALOG=yCONFIG_SND_HDA_CODEC_SIGMATEL=yCONFIG_SND_HDA_CODEC_VIA=yCONFIG_SND_HDA_CODEC_ATIHDMI=y
#CONFIG_SND_HDA_CODEC_NVHDMIis not setCONFIG_SND_HDA_CODEC_INTELHDMI=yCONFIG_SND_HDA_ELD=yCONFIG_SND_HDA_CODEC_CONEXANT=y
#CONFIG_SND_HDA_CODEC_CA0110is not setCONFIG_SND_HDA_CODEC_CMEDIA=yCONFIG_SND_HDA_CODEC_SI3054=yCONFIG_SND_HDA_GENERIC=yCONFIG_SND_HDA_POWER_SAVE=yCONFIG_SND_HDA_POWER_SAVE_DEFAULT=500
#CONFIG_SND_HDSPis not set
#CONFIG_SND_HDSPMis not set
#CONFIG_SND_HIFIERis not set
#CONFIG_SND_ICE1712is not set
#CONFIG_SND_ICE1724is not setCONFIG_SND_INTEL8X0=m
#CONFIG_SND_INTEL8X0Mis not set
#CONFIG_SND_KORG1212is not set
#CONFIG_SND_LX6464ESis not set
#CONFIG_SND_MAESTRO3is not set
#CONFIG_SND_MIXARTis not set
#CONFIG_SND_NM256is not set
#CONFIG_SND_PCXHRis not set
#CONFIG_SND_RIPTIDEis not set
#CONFIG_SND_RME32is not set
#CONFIG_SND_RME96is not set
#CONFIG_SND_RME9652is not set
#CONFIG_SND_SONICVIBESis not set
#CONFIG_SND_TRIDENTis not set
#CONFIG_SND_VIA82XXis not set
#CONFIG_SND_VIA82XX_MODEMis not set
#CONFIG_SND_VIRTUOSOis not set
#CONFIG_SND_VX222is not set
#CONFIG_SND_YMFPCIis not set
#CONFIG_SND_USBis not set
#CONFIG_SND_PCMCIAis not set
#CONFIG_SND_SOCis not set
#CONFIG_SOUND_PRIMEis not setCONFIG_AC97_BUS=mCONFIG_HID_SUPPORT=yCONFIG_HID=m
#CONFIG_HID_DEBUGis not set
#CONFIG_HIDRAWis not set#
# USB Input Devices
#CONFIG_USB_HID=m
#CONFIG_HID_PIDis not setCONFIG_USB_HIDDEV=y#
# USB HID Boot Protocol drivers
#
#CONFIG_USB_KBDis not set
#CONFIG_USB_MOUSEis not set#
# Special HID drivers
#
#CONFIG_HID_A4TECHis not set
#CONFIG_HID_APPLEis not set
#CONFIG_HID_BELKINis not set
#CONFIG_HID_CHERRYis not set
#CONFIG_HID_CHICONYis not set
#CONFIG_HID_CYPRESSis not set
#CONFIG_HID_DRAGONRISEis not set
#CONFIG_HID_EZKEYis not set
#CONFIG_HID_KYEis not set
#CONFIG_HID_GYRATIONis not set
#CONFIG_HID_KENSINGTONis not set
#CONFIG_HID_LOGITECHis not set
#CONFIG_HID_MICROSOFTis not set
#CONFIG_HID_MONTEREYis not set
#CONFIG_HID_NTRIGis not set
#CONFIG_HID_PANTHERLORDis not set
#CONFIG_HID_PETALYNXis not set
#CONFIG_HID_SAMSUNGis not set
#CONFIG_HID_SONYis not set
#CONFIG_HID_SUNPLUSis not set
#CONFIG_HID_GREENASIAis not set
#CONFIG_HID_SMARTJOYPLUSis not set
#CONFIG_HID_TOPSEEDis not set
#CONFIG_HID_THRUSTMASTERis not set
#CONFIG_HID_WACOMis not set
#CONFIG_HID_ZEROPLUSis not setCONFIG_USB_SUPPORT=yCONFIG_USB_ARCH_HAS_HCD=yCONFIG_USB_ARCH_HAS_OHCI=yCONFIG_USB_ARCH_HAS_EHCI=yCONFIG_USB=m
#CONFIG_USB_DEBUGis not setCONFIG_USB_ANNOUNCE_NEW_DEVICES=y#
# Miscellaneous USB options
#CONFIG_USB_DEVICEFS=yCONFIG_USB_DEVICE_CLASS=y
#CONFIG_USB_DYNAMIC_MINORSis not setCONFIG_USB_SUSPEND=y
#CONFIG_USB_OTGis not set
#CONFIG_USB_OTG_WHITELISTis not set
#CONFIG_USB_OTG_BLACKLIST_HUBis not setCONFIG_USB_MON=m
#CONFIG_USB_WUSBis not set
#CONFIG_USB_WUSB_CBAFis not set#
# USB Host Controller Drivers
#
#CONFIG_USB_C67X00_HCDis not set
#CONFIG_USB_XHCI_HCDis not setCONFIG_USB_EHCI_HCD=mCONFIG_USB_EHCI_ROOT_HUB_TT=yCONFIG_USB_EHCI_TT_NEWSCHED=y
#CONFIG_USB_OXU210HP_HCDis not set
#CONFIG_USB_ISP116X_HCDis not set
#CONFIG_USB_ISP1760_HCDis not setCONFIG_USB_OHCI_HCD=m
#CONFIG_USB_OHCI_BIG_ENDIAN_DESCis not set
#CONFIG_USB_OHCI_BIG_ENDIAN_MMIOis not setCONFIG_USB_OHCI_LITTLE_ENDIAN=yCONFIG_USB_UHCI_HCD=m
#CONFIG_USB_SL811_HCDis not set
#CONFIG_USB_R8A66597_HCDis not set
#CONFIG_USB_WHCI_HCDis not set
#CONFIG_USB_HWA_HCDis not set#
# Enable Host or Gadget support to see Inventra options ##
# USB Device Class drivers
#
#CONFIG_USB_ACMis not setCONFIG_USB_PRINTER=m
#CONFIG_USB_WDMis not setCONFIG_USB_TMC=m#
# NOTE:USB_STORAGEdepends on SCSI butBLK_DEV_SDmay ##
# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set#
# USB Imaging devices
#
#CONFIG_USB_MDC800is not set
#CONFIG_USB_MICROTEKis not set#
# USB port drivers
#
#CONFIG_USB_SERIALis not set#
# USB Miscellaneous drivers
#
#CONFIG_USB_EMI62is not set
#CONFIG_USB_EMI26is not set
#CONFIG_USB_ADUTUXis not set
#CONFIG_USB_SEVSEGis not set
#CONFIG_USB_RIO500is not set
#CONFIG_USB_LEGOTOWERis not set
#CONFIG_USB_LCDis not set
#CONFIG_USB_BERRY_CHARGEis not set
#CONFIG_USB_LEDis not set
#CONFIG_USB_CYPRESS_CY7C63is not set
#CONFIG_USB_CYTHERMis not set
#CONFIG_USB_IDMOUSEis not set
#CONFIG_USB_FTDI_ELANis not set
#CONFIG_USB_APPLEDISPLAYis not set
#CONFIG_USB_SISUSBVGAis not set
#CONFIG_USB_LDis not set
#CONFIG_USB_TRANCEVIBRATORis not set
#CONFIG_USB_IOWARRIORis not setCONFIG_USB_TEST=m
#CONFIG_USB_ISIGHTFWis not set
#CONFIG_USB_VSTis not set
#CONFIG_USB_GADGETis not set#
# OTG and related infrastructure
#
#CONFIG_NOP_USB_XCEIVis not set
#CONFIG_UWBis not setCONFIG_MMC=m
#CONFIG_MMC_DEBUGis not set
#CONFIG_MMC_UNSAFE_RESUMEis not set#
# MMC/SD/SDIO Card Drivers
#CONFIG_MMC_BLOCK=mCONFIG_MMC_BLOCK_BOUNCE=y
#CONFIG_SDIO_UARTis not set
#CONFIG_MMC_TESTis not set#
# MMC/SD/SDIO Host Controller Drivers
#CONFIG_MMC_SDHCI=mCONFIG_MMC_SDHCI_PCI=m
#CONFIG_MMC_RICOH_MMCis not setCONFIG_MMC_SDHCI_PLTFM=m
#CONFIG_MMC_WBSDis not set
#CONFIG_MMC_TIFM_SDis not setCONFIG_MMC_SDRICOH_CS=m
#CONFIG_MMC_CB710is not set
#CONFIG_MMC_VIA_SDMMCis not set
#CONFIG_MEMSTICKis not setCONFIG_NEW_LEDS=yCONFIG_LEDS_CLASS=m#
# LED drivers
#
#CONFIG_LEDS_ALIX2is not set
#CONFIG_LEDS_PCA9532is not set
#CONFIG_LEDS_LP3944is not set
#CONFIG_LEDS_CLEVO_MAILis not set
#CONFIG_LEDS_PCA955Xis not set
#CONFIG_LEDS_BD2802is not set#
# LED Triggers
#CONFIG_LEDS_TRIGGERS=yCONFIG_LEDS_TRIGGER_TIMER=mCONFIG_LEDS_TRIGGER_HEARTBEAT=m
#CONFIG_LEDS_TRIGGER_BACKLIGHTis not set
#CONFIG_LEDS_TRIGGER_DEFAULT_ONis not set#
# iptables trigger is under Netfilter config (LED target) # # CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set CONFIG_RTC_LIB=m CONFIG_RTC_CLASS=m#
# RTC interfaces
#CONFIG_RTC_INTF_SYSFS=yCONFIG_RTC_INTF_PROC=yCONFIG_RTC_INTF_DEV=y
#CONFIG_RTC_INTF_DEV_UIE_EMULis not set
#CONFIG_RTC_DRV_TESTis not set#
# I2C RTC drivers
#
#CONFIG_RTC_DRV_DS1307is not set
#CONFIG_RTC_DRV_DS1374is not set
#CONFIG_RTC_DRV_DS1672is not set
#CONFIG_RTC_DRV_MAX6900is not set
#CONFIG_RTC_DRV_RS5C372is not set
#CONFIG_RTC_DRV_ISL1208is not set
#CONFIG_RTC_DRV_X1205is not set
#CONFIG_RTC_DRV_PCF8563is not set
#CONFIG_RTC_DRV_PCF8583is not set
#CONFIG_RTC_DRV_M41T80is not set
#CONFIG_RTC_DRV_S35390Ais not set
#CONFIG_RTC_DRV_FM3130is not set
#CONFIG_RTC_DRV_RX8581is not set
#CONFIG_RTC_DRV_RX8025is not set#
# SPI RTC drivers
##
# Platform RTC drivers
#CONFIG_RTC_DRV_CMOS=m
#CONFIG_RTC_DRV_DS1286is not set
#CONFIG_RTC_DRV_DS1511is not set
#CONFIG_RTC_DRV_DS1553is not set
#CONFIG_RTC_DRV_DS1742is not set
#CONFIG_RTC_DRV_STK17TA8is not set
#CONFIG_RTC_DRV_M48T86is not set
#CONFIG_RTC_DRV_M48T35is not set
#CONFIG_RTC_DRV_M48T59is not set
#CONFIG_RTC_DRV_BQ4802is not set
#CONFIG_RTC_DRV_V3020is not set#
# on-CPU RTC drivers
#CONFIG_DMADEVICES=y#
# DMA Devices
#CONFIG_INTEL_IOATDMA=mCONFIG_DMA_ENGINE=y#
# DMA Clients
#CONFIG_NET_DMA=y
#CONFIG_ASYNC_TX_DMAis not set
#CONFIG_DMATESTis not setCONFIG_DCA=m
#CONFIG_AUXDISPLAYis not set
#CONFIG_UIOis not set#
# TI VLYNQ
#
#CONFIG_STAGINGis not setCONFIG_X86_PLATFORM_DEVICES=y
#CONFIG_ACER_WMIis not set
#CONFIG_ASUS_LAPTOPis not set
#CONFIG_FUJITSU_LAPTOPis not set
#CONFIG_MSI_LAPTOPis not set
#CONFIG_PANASONIC_LAPTOPis not set
#CONFIG_COMPAL_LAPTOPis not set
#CONFIG_SONY_LAPTOPis not setCONFIG_THINKPAD_ACPI=m
#CONFIG_THINKPAD_ACPI_DEBUGFACILITIESis not setCONFIG_THINKPAD_ACPI_DEBUG=y
#CONFIG_THINKPAD_ACPI_UNSAFE_LEDSis not setCONFIG_THINKPAD_ACPI_VIDEO=y
#CONFIG_THINKPAD_ACPI_HOTKEY_POLLis not set
#CONFIG_INTEL_MENLOWis not set
#CONFIG_EEEPC_LAPTOPis not set
#CONFIG_ACPI_WMIis not set
#CONFIG_ACPI_ASUSis not setCONFIG_ACPI_TOSHIBA=m#
# Firmware Drivers
#CONFIG_EDD=m
#CONFIG_EDD_OFFis not setCONFIG_FIRMWARE_MEMMAP=yCONFIG_EFI_VARS=m
#CONFIG_DELL_RBUis not set
#CONFIG_DCDBASis not setCONFIG_DMIID=y
#CONFIG_ISCSI_IBFT_FINDis not set#
# File systems
#CONFIG_EXT2_FS=yCONFIG_EXT2_FS_XATTR=yCONFIG_EXT2_FS_POSIX_ACL=yCONFIG_EXT2_FS_SECURITY=y
#CONFIG_EXT2_FS_XIPis not setCONFIG_EXT3_FS=y
#CONFIG_EXT3_DEFAULTS_TO_ORDEREDis not setCONFIG_EXT3_FS_XATTR=yCONFIG_EXT3_FS_POSIX_ACL=yCONFIG_EXT3_FS_SECURITY=yCONFIG_EXT4_FS=m
#CONFIG_EXT4DEV_COMPATis not setCONFIG_EXT4_FS_XATTR=yCONFIG_EXT4_FS_POSIX_ACL=yCONFIG_EXT4_FS_SECURITY=yCONFIG_JBD=y
#CONFIG_JBD_DEBUGis not setCONFIG_JBD2=m
#CONFIG_JBD2_DEBUGis not setCONFIG_FS_MBCACHE=yCONFIG_REISERFS_FS=m
#CONFIG_REISERFS_CHECKis not setCONFIG_REISERFS_PROC_INFO=yCONFIG_REISERFS_FS_XATTR=yCONFIG_REISERFS_FS_POSIX_ACL=yCONFIG_REISERFS_FS_SECURITY=y
#CONFIG_JFS_FSis not setCONFIG_FS_POSIX_ACL=yCONFIG_XFS_FS=mCONFIG_XFS_QUOTA=yCONFIG_XFS_POSIX_ACL=yCONFIG_XFS_RT=y
#CONFIG_XFS_DEBUGis not set
#CONFIG_GFS2_FSis not set
#CONFIG_OCFS2_FSis not setCONFIG_BTRFS_FS=m
#CONFIG_BTRFS_FS_POSIX_ACLis not setCONFIG_FILE_LOCKING=yCONFIG_FSNOTIFY=yCONFIG_DNOTIFY=yCONFIG_INOTIFY=yCONFIG_INOTIFY_USER=y
#CONFIG_QUOTAis not setCONFIG_QUOTACTL=yCONFIG_AUTOFS_FS=mCONFIG_AUTOFS4_FS=mCONFIG_FUSE_FS=mCONFIG_CUSE=mCONFIG_GENERIC_ACL=y#
# Caches
#
#CONFIG_FSCACHEis not set#
# CD-ROM/DVD Filesystems
#CONFIG_ISO9660_FS=mCONFIG_JOLIET=yCONFIG_ZISOFS=yCONFIG_UDF_FS=mCONFIG_UDF_NLS=y#
# DOS/FAT/NT Filesystems
#CONFIG_FAT_FS=m
#CONFIG_MSDOS_FSis not setCONFIG_VFAT_FS=mCONFIG_FAT_DEFAULT_CODEPAGE=437CONFIG_FAT_DEFAULT_IOCHARSET="utf8"CONFIG_NTFS_FS=m
#CONFIG_NTFS_DEBUGis not setCONFIG_NTFS_RW=y#
# Pseudo filesystems
#CONFIG_PROC_FS=yCONFIG_PROC_KCORE=yCONFIG_PROC_SYSCTL=yCONFIG_PROC_PAGE_MONITOR=yCONFIG_SYSFS=yCONFIG_TMPFS=yCONFIG_TMPFS_POSIX_ACL=y
#CONFIG_HUGETLBFSis not set
#CONFIG_HUGETLB_PAGEis not setCONFIG_CONFIGFS_FS=mCONFIG_MISC_FILESYSTEMS=y
#CONFIG_ADFS_FSis not set
#CONFIG_AFFS_FSis not set
#CONFIG_HFS_FSis not set
#CONFIG_HFSPLUS_FSis not set
#CONFIG_BEFS_FSis not set
#CONFIG_BFS_FSis not set
#CONFIG_EFS_FSis not setCONFIG_JFFS2_FS=mCONFIG_JFFS2_FS_DEBUG=0CONFIG_JFFS2_FS_WRITEBUFFER=y
#CONFIG_JFFS2_FS_WBUF_VERIFYis not set
#CONFIG_JFFS2_SUMMARYis not set
#CONFIG_JFFS2_FS_XATTRis not setCONFIG_JFFS2_COMPRESSION_OPTIONS=yCONFIG_JFFS2_ZLIB=yCONFIG_JFFS2_LZO=yCONFIG_JFFS2_RTIME=yCONFIG_JFFS2_RUBIN=y
#CONFIG_JFFS2_CMODE_NONEis not setCONFIG_JFFS2_CMODE_PRIORITY=y
#CONFIG_JFFS2_CMODE_SIZEis not set
#CONFIG_JFFS2_CMODE_FAVOURLZOis not setCONFIG_CRAMFS=mCONFIG_SQUASHFS=m
#CONFIG_SQUASHFS_EMBEDDEDis not setCONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
#CONFIG_VXFS_FSis not set
#CONFIG_MINIX_FSis not set
#CONFIG_OMFS_FSis not set
#CONFIG_HPFS_FSis not set
#CONFIG_QNX4FS_FSis not set
#CONFIG_ROMFS_FSis not set
#CONFIG_SYSV_FSis not set
#CONFIG_UFS_FSis not set
#CONFIG_NILFS2_FSis not setCONFIG_NETWORK_FILESYSTEMS=yCONFIG_NFS_FS=mCONFIG_NFS_V3=yCONFIG_NFS_V3_ACL=yCONFIG_NFS_V4=y
#CONFIG_NFS_V4_1is not setCONFIG_NFSD=mCONFIG_NFSD_V2_ACL=yCONFIG_NFSD_V3=yCONFIG_NFSD_V3_ACL=yCONFIG_NFSD_V4=yCONFIG_LOCKD=mCONFIG_LOCKD_V4=yCONFIG_EXPORTFS=mCONFIG_NFS_ACL_SUPPORT=mCONFIG_NFS_COMMON=yCONFIG_SUNRPC=mCONFIG_SUNRPC_GSS=mCONFIG_RPCSEC_GSS_KRB5=m
#CONFIG_RPCSEC_GSS_SPKM3is not setCONFIG_SMB_FS=mCONFIG_SMB_NLS_DEFAULT=yCONFIG_SMB_NLS_REMOTE="cp437"CONFIG_CIFS=m
#CONFIG_CIFS_STATSis not set
#CONFIG_CIFS_WEAK_PW_HASHis not setCONFIG_CIFS_XATTR=yCONFIG_CIFS_POSIX=y
#CONFIG_CIFS_DEBUG2is not setCONFIG_CIFS_EXPERIMENTAL=y
#CONFIG_NCP_FSis not set
#CONFIG_CODA_FSis not set
#CONFIG_AFS_FSis not set#
# Partition Types
#CONFIG_PARTITION_ADVANCED=y
#CONFIG_ACORN_PARTITIONis not set
#CONFIG_OSF_PARTITIONis not setCONFIG_AMIGA_PARTITION=y
#CONFIG_ATARI_PARTITIONis not set
#CONFIG_MAC_PARTITIONis not setCONFIG_MSDOS_PARTITION=y
#CONFIG_BSD_DISKLABELis not set
#CONFIG_MINIX_SUBPARTITIONis not set
#CONFIG_SOLARIS_X86_PARTITIONis not set
#CONFIG_UNIXWARE_DISKLABELis not setCONFIG_LDM_PARTITION=y
#CONFIG_LDM_DEBUGis not set
#CONFIG_SGI_PARTITIONis not set
#CONFIG_ULTRIX_PARTITIONis not set
#CONFIG_SUN_PARTITIONis not set
#CONFIG_KARMA_PARTITIONis not setCONFIG_EFI_PARTITION=y
#CONFIG_SYSV68_PARTITIONis not setCONFIG_NLS=yCONFIG_NLS_DEFAULT="iso8859-1"
#CONFIG_NLS_CODEPAGE_437is not set
#CONFIG_NLS_CODEPAGE_737is not set
#CONFIG_NLS_CODEPAGE_775is not set
#CONFIG_NLS_CODEPAGE_850is not setCONFIG_NLS_CODEPAGE_852=m
#CONFIG_NLS_CODEPAGE_855is not set
#CONFIG_NLS_CODEPAGE_857is not set
#CONFIG_NLS_CODEPAGE_860is not set
#CONFIG_NLS_CODEPAGE_861is not set
#CONFIG_NLS_CODEPAGE_862is not set
#CONFIG_NLS_CODEPAGE_863is not set
#CONFIG_NLS_CODEPAGE_864is not set
#CONFIG_NLS_CODEPAGE_865is not set
#CONFIG_NLS_CODEPAGE_866is not set
#CONFIG_NLS_CODEPAGE_869is not set
#CONFIG_NLS_CODEPAGE_936is not set
#CONFIG_NLS_CODEPAGE_950is not set
#CONFIG_NLS_CODEPAGE_932is not set
#CONFIG_NLS_CODEPAGE_949is not set
#CONFIG_NLS_CODEPAGE_874is not set
#CONFIG_NLS_ISO8859_8is not setCONFIG_NLS_CODEPAGE_1250=m
#CONFIG_NLS_CODEPAGE_1251is not setCONFIG_NLS_ASCII=yCONFIG_NLS_ISO8859_1=mCONFIG_NLS_ISO8859_2=m
#CONFIG_NLS_ISO8859_3is not set
#CONFIG_NLS_ISO8859_4is not set
#CONFIG_NLS_ISO8859_5is not set
#CONFIG_NLS_ISO8859_6is not set
#CONFIG_NLS_ISO8859_7is not set
#CONFIG_NLS_ISO8859_9is not set
#CONFIG_NLS_ISO8859_13is not set
#CONFIG_NLS_ISO8859_14is not set
#CONFIG_NLS_ISO8859_15is not set
#CONFIG_NLS_KOI8_Ris not set
#CONFIG_NLS_KOI8_Uis not setCONFIG_NLS_UTF8=m
#CONFIG_DLMis not set#
# Kernel hacking
#CONFIG_TRACE_IRQFLAGS_SUPPORT=yCONFIG_PRINTK_TIME=yCONFIG_ENABLE_WARN_DEPRECATED=yCONFIG_ENABLE_MUST_CHECK=yCONFIG_FRAME_WARN=2048CONFIG_MAGIC_SYSRQ=y
#CONFIG_UNUSED_SYMBOLSis not setCONFIG_DEBUG_FS=y
#CONFIG_HEADERS_CHECKis not setCONFIG_DEBUG_KERNEL=yCONFIG_DEBUG_SHIRQ=yCONFIG_DETECT_SOFTLOCKUP=y
#CONFIG_BOOTPARAM_SOFTLOCKUP_PANICis not setCONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0CONFIG_DETECT_HUNG_TASK=y
#CONFIG_BOOTPARAM_HUNG_TASK_PANICis not setCONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0CONFIG_SCHED_DEBUG=yCONFIG_SCHEDSTATS=yCONFIG_TIMER_STATS=yCONFIG_DEBUG_OBJECTS=y
#CONFIG_DEBUG_OBJECTS_SELFTESTis not setCONFIG_DEBUG_OBJECTS_FREE=yCONFIG_DEBUG_OBJECTS_TIMERS=yCONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1CONFIG_SLUB_DEBUG_ON=y
#CONFIG_SLUB_STATSis not set
#CONFIG_DEBUG_KMEMLEAKis not setCONFIG_DEBUG_RT_MUTEXES=yCONFIG_DEBUG_PI_LIST=y
#CONFIG_RT_MUTEX_TESTERis not setCONFIG_DEBUG_SPINLOCK=yCONFIG_DEBUG_MUTEXES=yCONFIG_DEBUG_LOCK_ALLOC=yCONFIG_PROVE_LOCKING=yCONFIG_LOCKDEP=yCONFIG_LOCK_STAT=y
#CONFIG_DEBUG_LOCKDEPis not setCONFIG_TRACE_IRQFLAGS=yCONFIG_DEBUG_SPINLOCK_SLEEP=y
#CONFIG_DEBUG_LOCKING_API_SELFTESTSis not setCONFIG_STACKTRACE=y
#CONFIG_DEBUG_KOBJECTis not setCONFIG_DEBUG_BUGVERBOSE=yCONFIG_DEBUG_INFO=yCONFIG_DEBUG_VM=y
#CONFIG_DEBUG_VIRTUALis not set
#CONFIG_DEBUG_WRITECOUNTis not set
#CONFIG_DEBUG_MEMORY_INITis not setCONFIG_DEBUG_LIST=yCONFIG_DEBUG_SG=yCONFIG_DEBUG_NOTIFIERS=yCONFIG_ARCH_WANT_FRAME_POINTERS=yCONFIG_FRAME_POINTER=y
#CONFIG_BOOT_PRINTK_DELAYis not set
#CONFIG_RCU_TORTURE_TESTis not setCONFIG_RCU_CPU_STALL_DETECTOR=y
#CONFIG_KPROBES_SANITY_TESTis not set
#CONFIG_BACKTRACE_SELF_TESTis not set
#CONFIG_DEBUG_BLOCK_EXT_DEVTis not set
#CONFIG_LKDTMis not set
#CONFIG_FAULT_INJECTIONis not setCONFIG_LATENCYTOP=y
#CONFIG_SYSCTL_SYSCALL_CHECKis not setCONFIG_DEBUG_PAGEALLOC=yCONFIG_USER_STACKTRACE_SUPPORT=yCONFIG_NOP_TRACER=yCONFIG_HAVE_FTRACE_NMI_ENTER=yCONFIG_HAVE_FUNCTION_TRACER=yCONFIG_HAVE_FUNCTION_GRAPH_TRACER=yCONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=yCONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=yCONFIG_HAVE_DYNAMIC_FTRACE=yCONFIG_HAVE_FTRACE_MCOUNT_RECORD=yCONFIG_HAVE_FTRACE_SYSCALLS=yCONFIG_TRACER_MAX_TRACE=yCONFIG_RING_BUFFER=yCONFIG_FTRACE_NMI_ENTER=yCONFIG_EVENT_TRACING=yCONFIG_CONTEXT_SWITCH_TRACER=yCONFIG_TRACING=yCONFIG_GENERIC_TRACER=yCONFIG_TRACING_SUPPORT=yCONFIG_FTRACE=yCONFIG_FUNCTION_TRACER=yCONFIG_FUNCTION_GRAPH_TRACER=yCONFIG_IRQSOFF_TRACER=yCONFIG_SYSPROF_TRACER=yCONFIG_SCHED_TRACER=y
#CONFIG_FTRACE_SYSCALLSis not setCONFIG_BOOT_TRACER=yCONFIG_BRANCH_PROFILE_NONE=y
#CONFIG_PROFILE_ANNOTATED_BRANCHESis not set
#CONFIG_PROFILE_ALL_BRANCHESis not setCONFIG_POWER_TRACER=yCONFIG_STACK_TRACER=yCONFIG_KMEMTRACE=yCONFIG_WORKQUEUE_TRACER=y
#CONFIG_BLK_DEV_IO_TRACEis not setCONFIG_DYNAMIC_FTRACE=y
#CONFIG_FUNCTION_PROFILERis not setCONFIG_FTRACE_MCOUNT_RECORD=y
#CONFIG_FTRACE_STARTUP_TESTis not setCONFIG_MMIOTRACE=yCONFIG_MMIOTRACE_TEST=m
#CONFIG_RING_BUFFER_BENCHMARKis not set
#CONFIG_PROVIDE_OHCI1394_DMA_INITis not set
#CONFIG_DYNAMIC_DEBUGis not setCONFIG_DMA_API_DEBUG=y
#CONFIG_SAMPLESis not setCONFIG_HAVE_ARCH_KGDB=y
#CONFIG_KGDBis not setCONFIG_HAVE_ARCH_KMEMCHECK=y
#CONFIG_STRICT_DEVMEMis not setCONFIG_X86_VERBOSE_BOOTUP=y
#CONFIG_EARLY_PRINTKis not setCONFIG_DEBUG_STACKOVERFLOW=yCONFIG_DEBUG_STACK_USAGE=y
#CONFIG_DEBUG_PER_CPU_MAPSis not setCONFIG_X86_PTDUMP=yCONFIG_DEBUG_RODATA=y
#CONFIG_DEBUG_RODATA_TESTis not set
#CONFIG_DEBUG_NX_TESTis not set
#CONFIG_IOMMU_DEBUGis not set
#CONFIG_IOMMU_STRESSis not setCONFIG_HAVE_MMIOTRACE_SUPPORT=yCONFIG_IO_DELAY_TYPE_0X80=0CONFIG_IO_DELAY_TYPE_0XED=1CONFIG_IO_DELAY_TYPE_UDELAY=2CONFIG_IO_DELAY_TYPE_NONE=3CONFIG_IO_DELAY_0X80=y
#CONFIG_IO_DELAY_0XEDis not set
#CONFIG_IO_DELAY_UDELAYis not set
#CONFIG_IO_DELAY_NONEis not setCONFIG_DEFAULT_IO_DELAY_TYPE=0CONFIG_DEBUG_BOOT_PARAMS=y
#CONFIG_CPA_DEBUGis not setCONFIG_OPTIMIZE_INLINING=y#
# Security options
#
#CONFIG_KEYSis not setCONFIG_SECURITY=y
#CONFIG_SECURITYFSis not setCONFIG_SECURITY_NETWORK=y
#CONFIG_SECURITY_NETWORK_XFRMis not set
#CONFIG_SECURITY_PATHis not set
#CONFIG_SECURITY_FILE_CAPABILITIESis not setCONFIG_SECURITY_SELINUX=yCONFIG_SECURITY_SELINUX_BOOTPARAM=yCONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1CONFIG_SECURITY_SELINUX_DISABLE=yCONFIG_SECURITY_SELINUX_DEVELOP=yCONFIG_SECURITY_SELINUX_AVC_STATS=yCONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
#CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAXis not set #CONFIG_SECURITY_TOMOYOis not set
#CONFIG_IMAis not setCONFIG_XOR_BLOCKS=mCONFIG_ASYNC_CORE=mCONFIG_ASYNC_MEMCPY=mCONFIG_ASYNC_XOR=mCONFIG_CRYPTO=y#
# Crypto core or helper
#
#CONFIG_CRYPTO_FIPSis not setCONFIG_CRYPTO_ALGAPI=mCONFIG_CRYPTO_ALGAPI2=mCONFIG_CRYPTO_AEAD2=mCONFIG_CRYPTO_BLKCIPHER=mCONFIG_CRYPTO_BLKCIPHER2=mCONFIG_CRYPTO_HASH=mCONFIG_CRYPTO_HASH2=mCONFIG_CRYPTO_RNG2=mCONFIG_CRYPTO_PCOMP=mCONFIG_CRYPTO_MANAGER=mCONFIG_CRYPTO_MANAGER2=m
#CONFIG_CRYPTO_GF128MULis not set
#CONFIG_CRYPTO_NULLis not setCONFIG_CRYPTO_WORKQUEUE=m
#CONFIG_CRYPTO_CRYPTDis not set
#CONFIG_CRYPTO_AUTHENCis not set
#CONFIG_CRYPTO_TESTis not set#
# Authenticated Encryption with Associated Data
#
#CONFIG_CRYPTO_CCMis not set
#CONFIG_CRYPTO_GCMis not set
#CONFIG_CRYPTO_SEQIVis not set#
# Block modes
#CONFIG_CRYPTO_CBC=m
#CONFIG_CRYPTO_CTRis not set
#CONFIG_CRYPTO_CTSis not setCONFIG_CRYPTO_ECB=m
#CONFIG_CRYPTO_LRWis not set
#CONFIG_CRYPTO_PCBCis not set
#CONFIG_CRYPTO_XTSis not set#
# Hash modes
#CONFIG_CRYPTO_HMAC=m
#CONFIG_CRYPTO_XCBCis not set#
# Digest
#CONFIG_CRYPTO_CRC32C=m
#CONFIG_CRYPTO_CRC32C_INTELis not set
#CONFIG_CRYPTO_MD4is not setCONFIG_CRYPTO_MD5=mCONFIG_CRYPTO_MICHAEL_MIC=m
#CONFIG_CRYPTO_RMD128is not set
#CONFIG_CRYPTO_RMD160is not set
#CONFIG_CRYPTO_RMD256is not set
#CONFIG_CRYPTO_RMD320is not setCONFIG_CRYPTO_SHA1=mCONFIG_CRYPTO_SHA256=m
#CONFIG_CRYPTO_SHA512is not set
#CONFIG_CRYPTO_TGR192is not set
#CONFIG_CRYPTO_WP512is not set#
# Ciphers
#CONFIG_CRYPTO_AES=m
#CONFIG_CRYPTO_AES_X86_64is not set
#CONFIG_CRYPTO_AES_NI_INTELis not set
#CONFIG_CRYPTO_ANUBISis not setCONFIG_CRYPTO_ARC4=m
#CONFIG_CRYPTO_BLOWFISHis not set
#CONFIG_CRYPTO_CAMELLIAis not set
#CONFIG_CRYPTO_CAST5is not set
#CONFIG_CRYPTO_CAST6is not setCONFIG_CRYPTO_DES=m
#CONFIG_CRYPTO_FCRYPTis not set
#CONFIG_CRYPTO_KHAZADis not set
#CONFIG_CRYPTO_SALSA20is not set
#CONFIG_CRYPTO_SALSA20_X86_64is not set
#CONFIG_CRYPTO_SEEDis not set
#CONFIG_CRYPTO_SERPENTis not set
#CONFIG_CRYPTO_TEAis not set
#CONFIG_CRYPTO_TWOFISHis not set
#CONFIG_CRYPTO_TWOFISH_X86_64is not set#
# Compression
#
#CONFIG_CRYPTO_DEFLATEis not set
#CONFIG_CRYPTO_ZLIBis not set
#CONFIG_CRYPTO_LZOis not set#
# Random Number Generation
#
#CONFIG_CRYPTO_ANSI_CPRNGis not setCONFIG_CRYPTO_HW=y
#CONFIG_CRYPTO_DEV_PADLOCKis not set
#CONFIG_CRYPTO_DEV_HIFN_795Xis not setCONFIG_HAVE_KVM=yCONFIG_HAVE_KVM_IRQCHIP=yCONFIG_VIRTUALIZATION=yCONFIG_KVM=mCONFIG_KVM_INTEL=mCONFIG_KVM_AMD=mCONFIG_KVM_TRACE=yCONFIG_VIRTIO=mCONFIG_VIRTIO_RING=mCONFIG_VIRTIO_PCI=mCONFIG_VIRTIO_BALLOON=mCONFIG_BINARY_PRINTF=y#
# Library routines
#CONFIG_BITREVERSE=yCONFIG_GENERIC_FIND_FIRST_BIT=yCONFIG_GENERIC_FIND_NEXT_BIT=yCONFIG_GENERIC_FIND_LAST_BIT=yCONFIG_CRC_CCITT=mCONFIG_CRC16=mCONFIG_CRC_T10DIF=yCONFIG_CRC_ITU_T=mCONFIG_CRC32=y
#CONFIG_CRC7is not setCONFIG_LIBCRC32C=mCONFIG_ZLIB_INFLATE=yCONFIG_ZLIB_DEFLATE=mCONFIG_LZO_COMPRESS=mCONFIG_LZO_DECOMPRESS=mCONFIG_DECOMPRESS_GZIP=yCONFIG_DECOMPRESS_BZIP2=yCONFIG_HAS_IOMEM=yCONFIG_HAS_IOPORT=yCONFIG_HAS_DMA=yCONFIG_NLATTR=y
Quoted 4 lines · Zdenek Kabelac
Well - I've tried to switch from 'slub' allocator to old 'slab' allocator and the problem is gone - shutdown goes without any problem.
So it's probably related to 'slub' allocator only?
The slab allocator does not have all the diagnostics of slub. The issue may simply not be detected in slab. If you switch off diagnostics in slub then everything will seem to work fine as well. But we need to figure out what is going wrong here.
Quoted 1 line
anything else I could try to better detect this problem?
Does it work with 2.6.30?
If you can do debugging during bootstrap (kvm?) then set a breakpoint at slab_bug. The registers have enough information to get the error message at that point.
Quoted 3 lines
(well the bisect should be last resort - as it might be pretty lengthy
- I'm not really sure which kernel would be actually good for the start)
The last released stable kernel is a good point to start.
Quoted 359 lines
Quoted 357 lines
Quoted 356 lines
#
CONFIG_LDM_DEBUGis not set
#CONFIG_SGI_PARTITIONis not set
#CONFIG_ULTRIX_PARTITIONis not set
#CONFIG_SUN_PARTITIONis not set
#CONFIG_KARMA_PARTITIONis not setCONFIG_EFI_PARTITION=y
#CONFIG_SYSV68_PARTITIONis not setCONFIG_NLS=yCONFIG_NLS_DEFAULT="iso8859-1"
#CONFIG_NLS_CODEPAGE_437is not set
#CONFIG_NLS_CODEPAGE_737is not set
#CONFIG_NLS_CODEPAGE_775is not set
#CONFIG_NLS_CODEPAGE_850is not setCONFIG_NLS_CODEPAGE_852=m
#CONFIG_NLS_CODEPAGE_855is not set
#CONFIG_NLS_CODEPAGE_857is not set
#CONFIG_NLS_CODEPAGE_860is not set
#CONFIG_NLS_CODEPAGE_861is not set
#CONFIG_NLS_CODEPAGE_862is not set
#CONFIG_NLS_CODEPAGE_863is not set
#CONFIG_NLS_CODEPAGE_864is not set
#CONFIG_NLS_CODEPAGE_865is not set
#CONFIG_NLS_CODEPAGE_866is not set
#CONFIG_NLS_CODEPAGE_869is not set
#CONFIG_NLS_CODEPAGE_936is not set
#CONFIG_NLS_CODEPAGE_950is not set
#CONFIG_NLS_CODEPAGE_932is not set
#CONFIG_NLS_CODEPAGE_949is not set
#CONFIG_NLS_CODEPAGE_874is not set
#CONFIG_NLS_ISO8859_8is not setCONFIG_NLS_CODEPAGE_1250=m
#CONFIG_NLS_CODEPAGE_1251is not setCONFIG_NLS_ASCII=yCONFIG_NLS_ISO8859_1=mCONFIG_NLS_ISO8859_2=m
#CONFIG_NLS_ISO8859_3is not set
#CONFIG_NLS_ISO8859_4is not set
#CONFIG_NLS_ISO8859_5is not set
#CONFIG_NLS_ISO8859_6is not set
#CONFIG_NLS_ISO8859_7is not set
#CONFIG_NLS_ISO8859_9is not set
#CONFIG_NLS_ISO8859_13is not set
#CONFIG_NLS_ISO8859_14is not set
#CONFIG_NLS_ISO8859_15is not set
#CONFIG_NLS_KOI8_Ris not set
#CONFIG_NLS_KOI8_Uis not setCONFIG_NLS_UTF8=m
#CONFIG_DLMis not set#
# Kernel hacking
#CONFIG_TRACE_IRQFLAGS_SUPPORT=yCONFIG_PRINTK_TIME=yCONFIG_ENABLE_WARN_DEPRECATED=yCONFIG_ENABLE_MUST_CHECK=yCONFIG_FRAME_WARN=2048CONFIG_MAGIC_SYSRQ=y
#CONFIG_UNUSED_SYMBOLSis not setCONFIG_DEBUG_FS=y
#CONFIG_HEADERS_CHECKis not setCONFIG_DEBUG_KERNEL=yCONFIG_DEBUG_SHIRQ=yCONFIG_DETECT_SOFTLOCKUP=y
#CONFIG_BOOTPARAM_SOFTLOCKUP_PANICis not setCONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0CONFIG_DETECT_HUNG_TASK=y
#CONFIG_BOOTPARAM_HUNG_TASK_PANICis not setCONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0CONFIG_SCHED_DEBUG=yCONFIG_SCHEDSTATS=yCONFIG_TIMER_STATS=yCONFIG_DEBUG_OBJECTS=y
#CONFIG_DEBUG_OBJECTS_SELFTESTis not setCONFIG_DEBUG_OBJECTS_FREE=yCONFIG_DEBUG_OBJECTS_TIMERS=yCONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1CONFIG_SLUB_DEBUG_ON=y
#CONFIG_SLUB_STATSis not set
#CONFIG_DEBUG_KMEMLEAKis not setCONFIG_DEBUG_RT_MUTEXES=yCONFIG_DEBUG_PI_LIST=y
#CONFIG_RT_MUTEX_TESTERis not setCONFIG_DEBUG_SPINLOCK=yCONFIG_DEBUG_MUTEXES=yCONFIG_DEBUG_LOCK_ALLOC=yCONFIG_PROVE_LOCKING=yCONFIG_LOCKDEP=yCONFIG_LOCK_STAT=y
#CONFIG_DEBUG_LOCKDEPis not setCONFIG_TRACE_IRQFLAGS=yCONFIG_DEBUG_SPINLOCK_SLEEP=y
#CONFIG_DEBUG_LOCKING_API_SELFTESTSis not setCONFIG_STACKTRACE=y
#CONFIG_DEBUG_KOBJECTis not setCONFIG_DEBUG_BUGVERBOSE=yCONFIG_DEBUG_INFO=yCONFIG_DEBUG_VM=y
#CONFIG_DEBUG_VIRTUALis not set
#CONFIG_DEBUG_WRITECOUNTis not set
#CONFIG_DEBUG_MEMORY_INITis not setCONFIG_DEBUG_LIST=yCONFIG_DEBUG_SG=yCONFIG_DEBUG_NOTIFIERS=yCONFIG_ARCH_WANT_FRAME_POINTERS=yCONFIG_FRAME_POINTER=y
#CONFIG_BOOT_PRINTK_DELAYis not set
#CONFIG_RCU_TORTURE_TESTis not setCONFIG_RCU_CPU_STALL_DETECTOR=y
#CONFIG_KPROBES_SANITY_TESTis not set
#CONFIG_BACKTRACE_SELF_TESTis not set
#CONFIG_DEBUG_BLOCK_EXT_DEVTis not set
#CONFIG_LKDTMis not set
#CONFIG_FAULT_INJECTIONis not setCONFIG_LATENCYTOP=y
#CONFIG_SYSCTL_SYSCALL_CHECKis not setCONFIG_DEBUG_PAGEALLOC=yCONFIG_USER_STACKTRACE_SUPPORT=yCONFIG_NOP_TRACER=yCONFIG_HAVE_FTRACE_NMI_ENTER=yCONFIG_HAVE_FUNCTION_TRACER=yCONFIG_HAVE_FUNCTION_GRAPH_TRACER=yCONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=yCONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=yCONFIG_HAVE_DYNAMIC_FTRACE=yCONFIG_HAVE_FTRACE_MCOUNT_RECORD=yCONFIG_HAVE_FTRACE_SYSCALLS=yCONFIG_TRACER_MAX_TRACE=yCONFIG_RING_BUFFER=yCONFIG_FTRACE_NMI_ENTER=yCONFIG_EVENT_TRACING=yCONFIG_CONTEXT_SWITCH_TRACER=yCONFIG_TRACING=yCONFIG_GENERIC_TRACER=yCONFIG_TRACING_SUPPORT=yCONFIG_FTRACE=yCONFIG_FUNCTION_TRACER=yCONFIG_FUNCTION_GRAPH_TRACER=yCONFIG_IRQSOFF_TRACER=yCONFIG_SYSPROF_TRACER=yCONFIG_SCHED_TRACER=y
#CONFIG_FTRACE_SYSCALLSis not setCONFIG_BOOT_TRACER=yCONFIG_BRANCH_PROFILE_NONE=y
#CONFIG_PROFILE_ANNOTATED_BRANCHESis not set
#CONFIG_PROFILE_ALL_BRANCHESis not setCONFIG_POWER_TRACER=yCONFIG_STACK_TRACER=yCONFIG_KMEMTRACE=yCONFIG_WORKQUEUE_TRACER=y
#CONFIG_BLK_DEV_IO_TRACEis not setCONFIG_DYNAMIC_FTRACE=y
#CONFIG_FUNCTION_PROFILERis not setCONFIG_FTRACE_MCOUNT_RECORD=y
#CONFIG_FTRACE_STARTUP_TESTis not setCONFIG_MMIOTRACE=yCONFIG_MMIOTRACE_TEST=m
#CONFIG_RING_BUFFER_BENCHMARKis not set
#CONFIG_PROVIDE_OHCI1394_DMA_INITis not set
#CONFIG_DYNAMIC_DEBUGis not setCONFIG_DMA_API_DEBUG=y
#CONFIG_SAMPLESis not setCONFIG_HAVE_ARCH_KGDB=y
#CONFIG_KGDBis not setCONFIG_HAVE_ARCH_KMEMCHECK=y
#CONFIG_STRICT_DEVMEMis not setCONFIG_X86_VERBOSE_BOOTUP=y
#CONFIG_EARLY_PRINTKis not setCONFIG_DEBUG_STACKOVERFLOW=yCONFIG_DEBUG_STACK_USAGE=y
#CONFIG_DEBUG_PER_CPU_MAPSis not setCONFIG_X86_PTDUMP=yCONFIG_DEBUG_RODATA=y
#CONFIG_DEBUG_RODATA_TESTis not set
#CONFIG_DEBUG_NX_TESTis not set
#CONFIG_IOMMU_DEBUGis not set
#CONFIG_IOMMU_STRESSis not setCONFIG_HAVE_MMIOTRACE_SUPPORT=yCONFIG_IO_DELAY_TYPE_0X80=0CONFIG_IO_DELAY_TYPE_0XED=1CONFIG_IO_DELAY_TYPE_UDELAY=2CONFIG_IO_DELAY_TYPE_NONE=3CONFIG_IO_DELAY_0X80=y
#CONFIG_IO_DELAY_0XEDis not set
#CONFIG_IO_DELAY_UDELAYis not set
#CONFIG_IO_DELAY_NONEis not setCONFIG_DEFAULT_IO_DELAY_TYPE=0CONFIG_DEBUG_BOOT_PARAMS=y
#CONFIG_CPA_DEBUGis not setCONFIG_OPTIMIZE_INLINING=y#
# Security options
#
#CONFIG_KEYSis not setCONFIG_SECURITY=y
#CONFIG_SECURITYFSis not setCONFIG_SECURITY_NETWORK=y
#CONFIG_SECURITY_NETWORK_XFRMis not set
#CONFIG_SECURITY_PATHis not set
#CONFIG_SECURITY_FILE_CAPABILITIESis not setCONFIG_SECURITY_SELINUX=yCONFIG_SECURITY_SELINUX_BOOTPARAM=yCONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1CONFIG_SECURITY_SELINUX_DISABLE=yCONFIG_SECURITY_SELINUX_DEVELOP=yCONFIG_SECURITY_SELINUX_AVC_STATS=yCONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
#CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAXis not set #CONFIG_SECURITY_TOMOYOis not set
#CONFIG_IMAis not setCONFIG_XOR_BLOCKS=mCONFIG_ASYNC_CORE=mCONFIG_ASYNC_MEMCPY=mCONFIG_ASYNC_XOR=mCONFIG_CRYPTO=y#
# Crypto core or helper
#
#CONFIG_CRYPTO_FIPSis not setCONFIG_CRYPTO_ALGAPI=mCONFIG_CRYPTO_ALGAPI2=mCONFIG_CRYPTO_AEAD2=mCONFIG_CRYPTO_BLKCIPHER=mCONFIG_CRYPTO_BLKCIPHER2=mCONFIG_CRYPTO_HASH=mCONFIG_CRYPTO_HASH2=mCONFIG_CRYPTO_RNG2=mCONFIG_CRYPTO_PCOMP=mCONFIG_CRYPTO_MANAGER=mCONFIG_CRYPTO_MANAGER2=m
#CONFIG_CRYPTO_GF128MULis not set
#CONFIG_CRYPTO_NULLis not setCONFIG_CRYPTO_WORKQUEUE=m
#CONFIG_CRYPTO_CRYPTDis not set
#CONFIG_CRYPTO_AUTHENCis not set
#CONFIG_CRYPTO_TESTis not set#
# Authenticated Encryption with Associated Data
#
#CONFIG_CRYPTO_CCMis not set
#CONFIG_CRYPTO_GCMis not set
#CONFIG_CRYPTO_SEQIVis not set#
# Block modes
#CONFIG_CRYPTO_CBC=m
#CONFIG_CRYPTO_CTRis not set
#CONFIG_CRYPTO_CTSis not setCONFIG_CRYPTO_ECB=m
#CONFIG_CRYPTO_LRWis not set
#CONFIG_CRYPTO_PCBCis not set
#CONFIG_CRYPTO_XTSis not set#
# Hash modes
#CONFIG_CRYPTO_HMAC=m
#CONFIG_CRYPTO_XCBCis not set#
# Digest
#CONFIG_CRYPTO_CRC32C=m
#CONFIG_CRYPTO_CRC32C_INTELis not set
#CONFIG_CRYPTO_MD4is not setCONFIG_CRYPTO_MD5=mCONFIG_CRYPTO_MICHAEL_MIC=m
#CONFIG_CRYPTO_RMD128is not set
#CONFIG_CRYPTO_RMD160is not set
#CONFIG_CRYPTO_RMD256is not set
#CONFIG_CRYPTO_RMD320is not setCONFIG_CRYPTO_SHA1=mCONFIG_CRYPTO_SHA256=m
#CONFIG_CRYPTO_SHA512is not set
#CONFIG_CRYPTO_TGR192is not set
#CONFIG_CRYPTO_WP512is not set#
# Ciphers
#CONFIG_CRYPTO_AES=m
#CONFIG_CRYPTO_AES_X86_64is not set
#CONFIG_CRYPTO_AES_NI_INTELis not set
#CONFIG_CRYPTO_ANUBISis not setCONFIG_CRYPTO_ARC4=m
#CONFIG_CRYPTO_BLOWFISHis not set
#CONFIG_CRYPTO_CAMELLIAis not set
#CONFIG_CRYPTO_CAST5is not set
#CONFIG_CRYPTO_CAST6is not setCONFIG_CRYPTO_DES=m
#CONFIG_CRYPTO_FCRYPTis not set
#CONFIG_CRYPTO_KHAZADis not set
#CONFIG_CRYPTO_SALSA20is not set
#CONFIG_CRYPTO_SALSA20_X86_64is not set
#CONFIG_CRYPTO_SEEDis not set
#CONFIG_CRYPTO_SERPENTis not set
#CONFIG_CRYPTO_TEAis not set
#CONFIG_CRYPTO_TWOFISHis not set
#CONFIG_CRYPTO_TWOFISH_X86_64is not set#
# Compression
#
#CONFIG_CRYPTO_DEFLATEis not set
#CONFIG_CRYPTO_ZLIBis not set
#CONFIG_CRYPTO_LZOis not set#
# Random Number Generation
#
#CONFIG_CRYPTO_ANSI_CPRNGis not setCONFIG_CRYPTO_HW=y
#CONFIG_CRYPTO_DEV_PADLOCKis not set
#CONFIG_CRYPTO_DEV_HIFN_795Xis not setCONFIG_HAVE_KVM=yCONFIG_HAVE_KVM_IRQCHIP=yCONFIG_VIRTUALIZATION=yCONFIG_KVM=mCONFIG_KVM_INTEL=mCONFIG_KVM_AMD=mCONFIG_KVM_TRACE=yCONFIG_VIRTIO=mCONFIG_VIRTIO_RING=mCONFIG_VIRTIO_PCI=mCONFIG_VIRTIO_BALLOON=mCONFIG_BINARY_PRINTF=y#
# Library routines
#CONFIG_BITREVERSE=yCONFIG_GENERIC_FIND_FIRST_BIT=yCONFIG_GENERIC_FIND_NEXT_BIT=yCONFIG_GENERIC_FIND_LAST_BIT=yCONFIG_CRC_CCITT=mCONFIG_CRC16=mCONFIG_CRC_T10DIF=yCONFIG_CRC_ITU_T=mCONFIG_CRC32=y
#CONFIG_CRC7is not setCONFIG_LIBCRC32C=mCONFIG_ZLIB_INFLATE=yCONFIG_ZLIB_DEFLATE=mCONFIG_LZO_COMPRESS=mCONFIG_LZO_DECOMPRESS=mCONFIG_DECOMPRESS_GZIP=yCONFIG_DECOMPRESS_BZIP2=yCONFIG_HAS_IOMEM=yCONFIG_HAS_IOPORT=yCONFIG_HAS_DMA=yCONFIG_NLATTR=y
2009/8/11 Christoph Lameter <[email protected]>:
Quoted 11 lines · Zdenek Kabelac
Quoted 5 lines
Well - I've tried to switch from 'slub' allocator to old 'slab' allocator and the problem is gone - shutdown goes without any problem.
So it's probably related to 'slub' allocator only?
The slab allocator does not have all the diagnostics of slub. The issue may simply not be detected in slab. If you switch off diagnostics in slub then everything will seem to work fine as well. But we need to figure out what is going wrong here.
Hmm - but there are few things -
My machine runs Fedora Rawhide. If I run the same kernel within KVM running Debian unstable I could easily reboot this guest machine without any problems.
Also if I boot Rawhide only to single mode - I could also reboot machine without this oops.
The problem seems to be - when I do full machine startup to the multiuser runlevel 3
Another issue which might make hunting for the problem harder is - that kvm doesn't have the same ACPI like I have on my Lenovo laptop. So the KVM doesn't help here probably?
(I assume most probably some hw initialization overwrites something somewhere ?)
Quoted 4 lines
Quoted 2 lines
anything else I could try to better detect this problem?
Does it work with 2.6.30?
I've no idea - I'll need to rebuild couple kernels - I've enabled these debugs options only recently.
Quoted 3 lines
If you can do debugging during bootstrap (kvm?) then set a breakpoint at
slab_bug. The registers have enough information to get the error message at that point.
How setting the breakpoint during boot process helps here ?? I'm getting this oops during shutdown - just before machine goes off.
Quoted 6 lines
Quoted 4 lines
(well the bisect should be last resort - as it might be pretty lengthy
- I'm not really sure which kernel would be actually good for the start)The last released stable kernel is a good point to start.
Ok - I guess it will take couple hours....
Zdenek
Quoted 361 lines
Quoted 360 lines
Quoted 358 lines
Quoted 357 lines
#
CONFIG_LDM_DEBUGis not set
#CONFIG_SGI_PARTITIONis not set
#CONFIG_ULTRIX_PARTITIONis not set
#CONFIG_SUN_PARTITIONis not set
#CONFIG_KARMA_PARTITIONis not setCONFIG_EFI_PARTITION=y
#CONFIG_SYSV68_PARTITIONis not setCONFIG_NLS=yCONFIG_NLS_DEFAULT="iso8859-1"
#CONFIG_NLS_CODEPAGE_437is not set
#CONFIG_NLS_CODEPAGE_737is not set
#CONFIG_NLS_CODEPAGE_775is not set
#CONFIG_NLS_CODEPAGE_850is not setCONFIG_NLS_CODEPAGE_852=m
#CONFIG_NLS_CODEPAGE_855is not set
#CONFIG_NLS_CODEPAGE_857is not set
#CONFIG_NLS_CODEPAGE_860is not set
#CONFIG_NLS_CODEPAGE_861is not set
#CONFIG_NLS_CODEPAGE_862is not set
#CONFIG_NLS_CODEPAGE_863is not set
#CONFIG_NLS_CODEPAGE_864is not set
#CONFIG_NLS_CODEPAGE_865is not set
#CONFIG_NLS_CODEPAGE_866is not set
#CONFIG_NLS_CODEPAGE_869is not set
#CONFIG_NLS_CODEPAGE_936is not set
#CONFIG_NLS_CODEPAGE_950is not set
#CONFIG_NLS_CODEPAGE_932is not set
#CONFIG_NLS_CODEPAGE_949is not set
#CONFIG_NLS_CODEPAGE_874is not set
#CONFIG_NLS_ISO8859_8is not setCONFIG_NLS_CODEPAGE_1250=m
#CONFIG_NLS_CODEPAGE_1251is not setCONFIG_NLS_ASCII=yCONFIG_NLS_ISO8859_1=mCONFIG_NLS_ISO8859_2=m
#CONFIG_NLS_ISO8859_3is not set
#CONFIG_NLS_ISO8859_4is not set
#CONFIG_NLS_ISO8859_5is not set
#CONFIG_NLS_ISO8859_6is not set
#CONFIG_NLS_ISO8859_7is not set
#CONFIG_NLS_ISO8859_9is not set
#CONFIG_NLS_ISO8859_13is not set
#CONFIG_NLS_ISO8859_14is not set
#CONFIG_NLS_ISO8859_15is not set
#CONFIG_NLS_KOI8_Ris not set
#CONFIG_NLS_KOI8_Uis not setCONFIG_NLS_UTF8=m
#CONFIG_DLMis not set#
# Kernel hacking
#CONFIG_TRACE_IRQFLAGS_SUPPORT=yCONFIG_PRINTK_TIME=yCONFIG_ENABLE_WARN_DEPRECATED=yCONFIG_ENABLE_MUST_CHECK=yCONFIG_FRAME_WARN=2048CONFIG_MAGIC_SYSRQ=y
#CONFIG_UNUSED_SYMBOLSis not setCONFIG_DEBUG_FS=y
#CONFIG_HEADERS_CHECKis not setCONFIG_DEBUG_KERNEL=yCONFIG_DEBUG_SHIRQ=yCONFIG_DETECT_SOFTLOCKUP=y
#CONFIG_BOOTPARAM_SOFTLOCKUP_PANICis not setCONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0CONFIG_DETECT_HUNG_TASK=y
#CONFIG_BOOTPARAM_HUNG_TASK_PANICis not setCONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0CONFIG_SCHED_DEBUG=yCONFIG_SCHEDSTATS=yCONFIG_TIMER_STATS=yCONFIG_DEBUG_OBJECTS=y
#CONFIG_DEBUG_OBJECTS_SELFTESTis not setCONFIG_DEBUG_OBJECTS_FREE=yCONFIG_DEBUG_OBJECTS_TIMERS=yCONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1CONFIG_SLUB_DEBUG_ON=y
#CONFIG_SLUB_STATSis not set
#CONFIG_DEBUG_KMEMLEAKis not setCONFIG_DEBUG_RT_MUTEXES=yCONFIG_DEBUG_PI_LIST=y
#CONFIG_RT_MUTEX_TESTERis not setCONFIG_DEBUG_SPINLOCK=yCONFIG_DEBUG_MUTEXES=yCONFIG_DEBUG_LOCK_ALLOC=yCONFIG_PROVE_LOCKING=yCONFIG_LOCKDEP=yCONFIG_LOCK_STAT=y
#CONFIG_DEBUG_LOCKDEPis not setCONFIG_TRACE_IRQFLAGS=yCONFIG_DEBUG_SPINLOCK_SLEEP=y
#CONFIG_DEBUG_LOCKING_API_SELFTESTSis not setCONFIG_STACKTRACE=y
#CONFIG_DEBUG_KOBJECTis not setCONFIG_DEBUG_BUGVERBOSE=yCONFIG_DEBUG_INFO=yCONFIG_DEBUG_VM=y
#CONFIG_DEBUG_VIRTUALis not set
#CONFIG_DEBUG_WRITECOUNTis not set
#CONFIG_DEBUG_MEMORY_INITis not setCONFIG_DEBUG_LIST=yCONFIG_DEBUG_SG=yCONFIG_DEBUG_NOTIFIERS=yCONFIG_ARCH_WANT_FRAME_POINTERS=yCONFIG_FRAME_POINTER=y
#CONFIG_BOOT_PRINTK_DELAYis not set
#CONFIG_RCU_TORTURE_TESTis not setCONFIG_RCU_CPU_STALL_DETECTOR=y
#CONFIG_KPROBES_SANITY_TESTis not set
#CONFIG_BACKTRACE_SELF_TESTis not set
#CONFIG_DEBUG_BLOCK_EXT_DEVTis not set
#CONFIG_LKDTMis not set
#CONFIG_FAULT_INJECTIONis not setCONFIG_LATENCYTOP=y
#CONFIG_SYSCTL_SYSCALL_CHECKis not setCONFIG_DEBUG_PAGEALLOC=yCONFIG_USER_STACKTRACE_SUPPORT=yCONFIG_NOP_TRACER=yCONFIG_HAVE_FTRACE_NMI_ENTER=yCONFIG_HAVE_FUNCTION_TRACER=yCONFIG_HAVE_FUNCTION_GRAPH_TRACER=yCONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=yCONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=yCONFIG_HAVE_DYNAMIC_FTRACE=yCONFIG_HAVE_FTRACE_MCOUNT_RECORD=yCONFIG_HAVE_FTRACE_SYSCALLS=yCONFIG_TRACER_MAX_TRACE=yCONFIG_RING_BUFFER=yCONFIG_FTRACE_NMI_ENTER=yCONFIG_EVENT_TRACING=yCONFIG_CONTEXT_SWITCH_TRACER=yCONFIG_TRACING=yCONFIG_GENERIC_TRACER=yCONFIG_TRACING_SUPPORT=yCONFIG_FTRACE=yCONFIG_FUNCTION_TRACER=yCONFIG_FUNCTION_GRAPH_TRACER=yCONFIG_IRQSOFF_TRACER=yCONFIG_SYSPROF_TRACER=yCONFIG_SCHED_TRACER=y
#CONFIG_FTRACE_SYSCALLSis not setCONFIG_BOOT_TRACER=yCONFIG_BRANCH_PROFILE_NONE=y
#CONFIG_PROFILE_ANNOTATED_BRANCHESis not set
#CONFIG_PROFILE_ALL_BRANCHESis not setCONFIG_POWER_TRACER=yCONFIG_STACK_TRACER=yCONFIG_KMEMTRACE=yCONFIG_WORKQUEUE_TRACER=y
#CONFIG_BLK_DEV_IO_TRACEis not setCONFIG_DYNAMIC_FTRACE=y
#CONFIG_FUNCTION_PROFILERis not setCONFIG_FTRACE_MCOUNT_RECORD=y
#CONFIG_FTRACE_STARTUP_TESTis not setCONFIG_MMIOTRACE=yCONFIG_MMIOTRACE_TEST=m
#CONFIG_RING_BUFFER_BENCHMARKis not set
#CONFIG_PROVIDE_OHCI1394_DMA_INITis not set
#CONFIG_DYNAMIC_DEBUGis not setCONFIG_DMA_API_DEBUG=y
#CONFIG_SAMPLESis not setCONFIG_HAVE_ARCH_KGDB=y
#CONFIG_KGDBis not setCONFIG_HAVE_ARCH_KMEMCHECK=y
#CONFIG_STRICT_DEVMEMis not setCONFIG_X86_VERBOSE_BOOTUP=y
#CONFIG_EARLY_PRINTKis not setCONFIG_DEBUG_STACKOVERFLOW=yCONFIG_DEBUG_STACK_USAGE=y
#CONFIG_DEBUG_PER_CPU_MAPSis not setCONFIG_X86_PTDUMP=yCONFIG_DEBUG_RODATA=y
#CONFIG_DEBUG_RODATA_TESTis not set
#CONFIG_DEBUG_NX_TESTis not set
#CONFIG_IOMMU_DEBUGis not set
#CONFIG_IOMMU_STRESSis not setCONFIG_HAVE_MMIOTRACE_SUPPORT=yCONFIG_IO_DELAY_TYPE_0X80=0CONFIG_IO_DELAY_TYPE_0XED=1CONFIG_IO_DELAY_TYPE_UDELAY=2CONFIG_IO_DELAY_TYPE_NONE=3CONFIG_IO_DELAY_0X80=y
#CONFIG_IO_DELAY_0XEDis not set
#CONFIG_IO_DELAY_UDELAYis not set
#CONFIG_IO_DELAY_NONEis not setCONFIG_DEFAULT_IO_DELAY_TYPE=0CONFIG_DEBUG_BOOT_PARAMS=y
#CONFIG_CPA_DEBUGis not setCONFIG_OPTIMIZE_INLINING=y#
# Security options
#
#CONFIG_KEYSis not setCONFIG_SECURITY=y
#CONFIG_SECURITYFSis not setCONFIG_SECURITY_NETWORK=y
#CONFIG_SECURITY_NETWORK_XFRMis not set
#CONFIG_SECURITY_PATHis not set
#CONFIG_SECURITY_FILE_CAPABILITIESis not setCONFIG_SECURITY_SELINUX=yCONFIG_SECURITY_SELINUX_BOOTPARAM=yCONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1CONFIG_SECURITY_SELINUX_DISABLE=yCONFIG_SECURITY_SELINUX_DEVELOP=yCONFIG_SECURITY_SELINUX_AVC_STATS=yCONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
#CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAXis not set #CONFIG_SECURITY_TOMOYOis not set
#CONFIG_IMAis not setCONFIG_XOR_BLOCKS=mCONFIG_ASYNC_CORE=mCONFIG_ASYNC_MEMCPY=mCONFIG_ASYNC_XOR=mCONFIG_CRYPTO=y#
# Crypto core or helper
#
#CONFIG_CRYPTO_FIPSis not setCONFIG_CRYPTO_ALGAPI=mCONFIG_CRYPTO_ALGAPI2=mCONFIG_CRYPTO_AEAD2=mCONFIG_CRYPTO_BLKCIPHER=mCONFIG_CRYPTO_BLKCIPHER2=mCONFIG_CRYPTO_HASH=mCONFIG_CRYPTO_HASH2=mCONFIG_CRYPTO_RNG2=mCONFIG_CRYPTO_PCOMP=mCONFIG_CRYPTO_MANAGER=mCONFIG_CRYPTO_MANAGER2=m
#CONFIG_CRYPTO_GF128MULis not set
#CONFIG_CRYPTO_NULLis not setCONFIG_CRYPTO_WORKQUEUE=m
#CONFIG_CRYPTO_CRYPTDis not set
#CONFIG_CRYPTO_AUTHENCis not set
#CONFIG_CRYPTO_TESTis not set#
# Authenticated Encryption with Associated Data
#
#CONFIG_CRYPTO_CCMis not set
#CONFIG_CRYPTO_GCMis not set
#CONFIG_CRYPTO_SEQIVis not set#
# Block modes
#CONFIG_CRYPTO_CBC=m
#CONFIG_CRYPTO_CTRis not set
#CONFIG_CRYPTO_CTSis not setCONFIG_CRYPTO_ECB=m
#CONFIG_CRYPTO_LRWis not set
#CONFIG_CRYPTO_PCBCis not set
#CONFIG_CRYPTO_XTSis not set#
# Hash modes
#CONFIG_CRYPTO_HMAC=m
#CONFIG_CRYPTO_XCBCis not set#
# Digest
#CONFIG_CRYPTO_CRC32C=m
#CONFIG_CRYPTO_CRC32C_INTELis not set
#CONFIG_CRYPTO_MD4is not setCONFIG_CRYPTO_MD5=mCONFIG_CRYPTO_MICHAEL_MIC=m
#CONFIG_CRYPTO_RMD128is not set
#CONFIG_CRYPTO_RMD160is not set
#CONFIG_CRYPTO_RMD256is not set
#CONFIG_CRYPTO_RMD320is not setCONFIG_CRYPTO_SHA1=mCONFIG_CRYPTO_SHA256=m
#CONFIG_CRYPTO_SHA512is not set
#CONFIG_CRYPTO_TGR192is not set
#CONFIG_CRYPTO_WP512is not set#
# Ciphers
#CONFIG_CRYPTO_AES=m
#CONFIG_CRYPTO_AES_X86_64is not set
#CONFIG_CRYPTO_AES_NI_INTELis not set
#CONFIG_CRYPTO_ANUBISis not setCONFIG_CRYPTO_ARC4=m
#CONFIG_CRYPTO_BLOWFISHis not set
#CONFIG_CRYPTO_CAMELLIAis not set
#CONFIG_CRYPTO_CAST5is not set
#CONFIG_CRYPTO_CAST6is not setCONFIG_CRYPTO_DES=m
#CONFIG_CRYPTO_FCRYPTis not set
#CONFIG_CRYPTO_KHAZADis not set
#CONFIG_CRYPTO_SALSA20is not set
#CONFIG_CRYPTO_SALSA20_X86_64is not set
#CONFIG_CRYPTO_SEEDis not set
#CONFIG_CRYPTO_SERPENTis not set
#CONFIG_CRYPTO_TEAis not set
#CONFIG_CRYPTO_TWOFISHis not set
#CONFIG_CRYPTO_TWOFISH_X86_64is not set#
# Compression
#
#CONFIG_CRYPTO_DEFLATEis not set
#CONFIG_CRYPTO_ZLIBis not set
#CONFIG_CRYPTO_LZOis not set#
# Random Number Generation
#
#CONFIG_CRYPTO_ANSI_CPRNGis not setCONFIG_CRYPTO_HW=y
#CONFIG_CRYPTO_DEV_PADLOCKis not set
#CONFIG_CRYPTO_DEV_HIFN_795Xis not setCONFIG_HAVE_KVM=yCONFIG_HAVE_KVM_IRQCHIP=yCONFIG_VIRTUALIZATION=yCONFIG_KVM=mCONFIG_KVM_INTEL=mCONFIG_KVM_AMD=mCONFIG_KVM_TRACE=yCONFIG_VIRTIO=mCONFIG_VIRTIO_RING=mCONFIG_VIRTIO_PCI=mCONFIG_VIRTIO_BALLOON=mCONFIG_BINARY_PRINTF=y#
# Library routines
#CONFIG_BITREVERSE=yCONFIG_GENERIC_FIND_FIRST_BIT=yCONFIG_GENERIC_FIND_NEXT_BIT=yCONFIG_GENERIC_FIND_LAST_BIT=yCONFIG_CRC_CCITT=mCONFIG_CRC16=mCONFIG_CRC_T10DIF=yCONFIG_CRC_ITU_T=mCONFIG_CRC32=y
#CONFIG_CRC7is not setCONFIG_LIBCRC32C=mCONFIG_ZLIB_INFLATE=yCONFIG_ZLIB_DEFLATE=mCONFIG_LZO_COMPRESS=mCONFIG_LZO_DECOMPRESS=mCONFIG_DECOMPRESS_GZIP=yCONFIG_DECOMPRESS_BZIP2=yCONFIG_HAS_IOMEM=yCONFIG_HAS_IOPORT=yCONFIG_HAS_DMA=yCONFIG_NLATTR=y
Quoted 15 lines · Zdenek Kabelac
2009/8/11 Christoph Lameter <[email protected]>:
Quoted 11 lines · Zdenek Kabelac
Quoted 5 lines
Well - I've tried to switch from 'slub' allocator to old 'slab' allocator and the problem is gone - shutdown goes without any problem.
So it's probably related to 'slub' allocator only?
The slab allocator does not have all the diagnostics of slub. The issue may simply not be detected in slab. If you switch off diagnostics in slub then everything will seem to work fine as well. But we need to figure out what is going wrong here.
Hmm - but there are few things -
Quoted 8 lines
My machine runs Fedora Rawhide. If I run the same kernel within KVM running Debian unstable I could easily reboot this guest machine without any problems.
Also if I boot Rawhide only to single mode - I could also reboot machine without this oops.
The problem seems to be - when I do full machine startup to the multiuser runlevel 3
Try booting all the way and recording you output from lsmod. Reboot single user mode and modprobe each of the modules in that original lists. Test shutdown from single user mode. This might identify if it is one of your loaded modules. If so, effectively bisect the modprobes until you find the offending module(s).
Robin
2009/8/11 Robin Holt <[email protected]>:
Quoted 25 lines · Zdenek Kabelac
Quoted 15 lines
2009/8/11 Christoph Lameter <[email protected]>:
Quoted 11 lines · Zdenek Kabelac
Quoted 5 lines
Well - I've tried to switch from 'slub' allocator to old 'slab' allocator and the problem is gone - shutdown goes without any problem.
So it's probably related to 'slub' allocator only?
The slab allocator does not have all the diagnostics of slub. The issue may simply not be detected in slab. If you switch off diagnostics in slub then everything will seem to work fine as well. But we need to figure out what is going wrong here.
Hmm - but there are few things -
Quoted 8 lines
My machine runs Fedora Rawhide. If I run the same kernel within KVM running Debian unstable I could easily reboot this guest machine without any problems.
Also if I boot Rawhide only to single mode - I could also reboot machine without this oops.
The problem seems to be - when I do full machine startup to the multiuser runlevel 3
Quoted 6 lines
Try booting all the way and recording you output from lsmod. Reboot single user mode and modprobe each of the modules in that original lists. Test shutdown from single user mode. This might identify if it is one of your loaded modules. If so, effectively bisect the modprobes until you find the offending module(s).
Ok - it appeared to be more complex - when I've been trying to get this oops on my laptop while not being connected via wired net - but to not bother here with details - the result is
That if I remove nf_conntrack_ipv4.ko - so it can not be loaded - the problem is gone.
So it looks like the memory problem is related to netfiltering - there are multiple modules loaded as dependecy becuase of this - so it's hard to say exactly which module of them makes the trouble.
I've checked for some recent commits in this area - and they seem to be actually important
(i.e 941297f443f871b8c3372feccf27a8733f6ce9e9 16.Jul)
I could probably try to revert some of them - but if someone has some ideas what could make these problems ?
I've added authors of some recent conntrack commits to Cc: - maybe they might know?
Zdenek
2009/8/11 Zdenek Kabelac <[email protected]>:
Quoted 48 lines
2009/8/11 Robin Holt <[email protected]>:
Quoted 25 lines · Zdenek Kabelac
Quoted 15 lines
2009/8/11 Christoph Lameter <[email protected]>:
Quoted 11 lines · Zdenek Kabelac
Quoted 5 lines
Well - I've tried to switch from 'slub' allocator to old 'slab' allocator and the problem is gone - shutdown goes without any problem.
So it's probably related to 'slub' allocator only?
The slab allocator does not have all the diagnostics of slub. The issue may simply not be detected in slab. If you switch off diagnostics in slub then everything will seem to work fine as well. But we need to figure out what is going wrong here.
Hmm - but there are few things -
Quoted 8 lines
My machine runs Fedora Rawhide. If I run the same kernel within KVM running Debian unstable I could easily reboot this guest machine without any problems.
Also if I boot Rawhide only to single mode - I could also reboot machine without this oops.
The problem seems to be - when I do full machine startup to the multiuser runlevel 3Quoted 6 lines
Try booting all the way and recording you output from lsmod. Reboot single user mode and modprobe each of the modules in that original lists. Test shutdown from single user mode. This might identify if it is one of your loaded modules. If so, effectively bisect the modprobes until you find the offending module(s).
Ok - it appeared to be more complex - when I've been trying to get this oops on my laptop while not being connected via wired net - but to not bother here with details - the result is
That if I remove nf_conntrack_ipv4.ko - so it can not be loaded - the problem is gone.
So it looks like the memory problem is related to netfiltering - there are multiple modules loaded as dependecy becuase of this - so it's hard to say exactly which module of them makes the trouble.I've checked for some recent commits in this area - and they seem to be actually important
(i.e941297f443f871b8c3372feccf27a8733f6ce9e916.Jul)
Quoted 5 lines
I could probably try to revert some of them - but if someone has some ideas what could make these problems ?
I've added authors of some recent conntrack commits to Cc: - maybe they might know?
I've tested v2.6.30 - and it's crashing in the same way - so any other starting point where slub has the same detection mechanism and conntrack module should be working reliable ?
Zdenek
Quoted 6 lines · Zdenek Kabelac
Quoted 2 lines
I've added authors of some recent conntrack commits to Cc: - maybe they might know?
I've tested v2.6.30 - and it's crashing in the same way - so any other starting point where slub has the same detection mechanism and conntrack module should be working reliable ?
Next point is 2.6.29.
2009/8/13 Christoph Lameter <[email protected]>:
Quoted 11 lines · Zdenek Kabelac
Quoted 7 lines
Quoted 3 lines
I've added authors of some recent conntrack commits to Cc: - maybe they might know?
I've tested v2.6.30 - and it's crashing in the same way - so any other starting point where slub has the same detection mechanism and conntrack module should be working reliable ?
Next point is 2.6.29.
Ok - played lengthy game between 2.6.29 which appeared to be ok and 2.6.30
And the winner is: ea781f197d6a835cbb93a0bf88ee1696296ed8aa
netfilter: nf_conntrack: use SLAB_DESTROY_BY_RCU and get rid of call_rcu()
The error is actually being hit by libvirtd networking rules added during boot for my kvm usage.
(Which I noticed after some time... leading my game into wrong direction ;))....
Here are the some last bisect entries:
git bisect bad 54dc79fe0d895758bdaa1dcf8512d3d21263d105
# bad: [5c0de29d06318ec8f6e3ba0d17d62529dbbdc1e8] netfilter:nf_conntrack: add generic function to get len of generic policy
git bisect bad 5c0de29d06318ec8f6e3ba0d17d62529dbbdc1e8
# good: [e487eb99cf9381a4f8254fa01747a85818da612b] netlink: add nla_policy_len() git bisect good e487eb99cf9381a4f8254fa01747a85818da612b
# good: [1f9352ae2253a97b07b34dcf16ffa3b4ca12c558] netfilter:
{ip,ip6,arp}_tables: fix incorrect loop detection
git bisect good 1f9352ae2253a97b07b34dcf16ffa3b4ca12c558
# bad: [2732c4e45bb67006fdc9ae6669be866762711ab5] netfilter:
ctnetlink: allocate right-sized ctnetlink skb
git bisect bad 2732c4e45bb67006fdc9ae6669be866762711ab5
Unfortunately the commit cannot be reverted with current tree - thus I cannot easily check if it's the only problem.
(warning: too many files (created: 3096 deleted: 1096), skipping inexact rename detection
Automatic revert failed. After resolving the conflicts,)
Zdenek
2009/8/13 Zdenek Kabelac <[email protected]>:
Quoted 39 lines
2009/8/13 Christoph Lameter <[email protected]>:
Quoted 11 lines · Zdenek Kabelac
Quoted 7 lines
Quoted 3 lines
I've added authors of some recent conntrack commits to Cc: - maybe they might know?
I've tested v2.6.30 - and it's crashing in the same way - so any other starting point where slub has the same detection mechanism and conntrack module should be working reliable ?
Next point is 2.6.29.
Ok - played lengthy game between 2.6.29 which appeared to be ok and 2.6.30
And the winner is:
ea781f197d6a835cbb93a0bf88ee1696296ed8aa
netfilter:nf_conntrack: useSLAB_DESTROY_BY_RCUand get rid ofcall_rcu()The error is actually being hit by libvirtd networking rules added during boot for my kvm usage.
(Which I noticed after some time... leading my game into wrong direction ;))....Here are the some last bisect entries:
git bisect bad
54dc79fe0d895758bdaa1dcf8512d3d21263d105
# bad: [5c0de29d06318ec8f6e3ba0d17d62529dbbdc1e8] netfilter:nf_conntrack: add generic function to get len of generic policy
git bisect bad5c0de29d06318ec8f6e3ba0d17d62529dbbdc1e8
# good: [e487eb99cf9381a4f8254fa01747a85818da612b] netlink: addnla_policy_len()git bisect goode487eb99cf9381a4f8254fa01747a85818da612b
# good: [1f9352ae2253a97b07b34dcf16ffa3b4ca12c558] netfilter:
{ip,ip6,arp}_tables: fix incorrect loop detection
git bisect good1f9352ae2253a97b07b34dcf16ffa3b4ca12c558
# bad: [2732c4e45bb67006fdc9ae6669be866762711ab5] netfilter:
ctnetlink: allocate right-sized ctnetlink skb
git bisect bad2732c4e45bb67006fdc9ae6669be866762711ab5
Quoted 5 lines
Unfortunately the commit cannot be reverted with current tree - thus I cannot easily check if it's the only problem.
(warning: too many files (created: 3096 deleted: 1096), skipping inexact rename detection
Automatic revert failed. After resolving the conflicts,)
Hmm after checking today with serial cable attached - it looks like I've tracked the problem but to the wrong commit - my original 'slub' error was now actually something else - so there are most probably two kinds of problem - as with this kernel the nf_conntrack_ipv4 fails to register tcp so it's not loaded at all.
This might get fixed later, but different error was there.
I'll need to play the game again and check when I'll start to get the same slub oops/
Here is the second oops I've got with 2.6.29-rc5 kernel:
IP: [<ffffffffa02b2c2c>] nf_conntrack_helper_unregister+0x16c/0x320 [nf_conntrack]
PGD 13bfb1067 PUD 1384c8067 PMD 0
Oops: 0000 [#1] SMP DEBUG_PAGEALLOC last sysfs file: /sys/module/nf_conntrack_ftp/refcnt CPU 0 Modules linked in: sit tunnel4 nf_defrag_ipv4 bridge stp llc autofs4
ipv6 nf_conntrack_ftp(-) nf_conntrack binfmt_misc loop dm_mirror dm_region_hash dm_log dm_mod kvm_intel kvm i915 drm i2c_algo_bit uinput i2c_i801 arc4 ecb cryptomgr aead crypto_blkcipher crypto_hash crypto_algapi iwl3945 iwlcore mac80211 video thinkpad_acpi i2c_core sr_mod rfkill led_class evdev iTCO_wdt backlight usbhid hid cfg80211 iTCO_vendor_support e1000e psmouse serio_raw cdrom output rtc_cmos rtc_core battery intel_agp nvram rtc_lib button ac uhci_hcd ohci_hcd ehci_hcd usbcore [last unloaded: x_tables]
Pid: 2824, comm: modprobe Not tainted 2.6.29-rc5-00889-gea781f1 #25 6464CTO
RIP: 0010:[<ffffffffa02b2c2c>] [<ffffffffa02b2c2c>] nf_conntrack_helper_unregister+0x16c/0x320 [nf_conntrack] RSP: 0018:ffff88013982fe68 EFLAGS: 00010202 RAX: 0000000000000200 RBX: 0000000000000001 RCX: ffffffffa02b2b31 RDX: 00000000000001ff RSI: 8f5c28f5c28f5c29 RDI: 0000000000000001 RBP: ffff88013982feb8 R08: 0000000000000000 R09: 0000000000000000 R10: 000000000000006d R11: 0000000000000000 R12: ffffffffa02c6a00 R13: ffffffffa02c71a0 R14: ffffffff81188e20 R15: ffff88013982fe78 FS: 00007ffbd4984700(0000) GS:ffffffff8092e040(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000038 CR3: 000000013779b000 CR4: 00000000000026e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process modprobe (pid: 2824, threadinfo ffff88013982e000, task ffff880138710000) Stack: ffff88013982fe88 0000020080271bf2 ffffffff806a47c0 0000000000000246 ffff88013982fe98 ffffffffa02c6a00 0000000000000000 ffffffffa02c71a0 0000000000000000 000000000040f510 ffff88013982fed8 ffffffffa02c502f Call Trace: [<ffffffffa02c502f>] nf_conntrack_ftp_fini+0x2f/0x70 [nf_conntrack_ftp] [<ffffffff8027bcc5>] sys_delete_module+0x1a5/0x270 [<ffffffff8020d329>] ? retint_swapgs+0xe/0x13 [<ffffffff80271bf2>] ? trace_hardirqs_on_caller+0x162/0x1b0 [<ffffffff80292121>] ? audit_syscall_entry+0x191/0x1c0 [<ffffffff80526dae>] ? trace_hardirqs_on_thunk+0x3a/0x3f [<ffffffff8020c84b>] system_call_fastpath+0x16/0x1b Code: c6 00 00 0f 82 66 ff ff ff 49 8b 9e d8 05 00 00 48 85 db 75 16
e9 8e 00 00 00 0f 1f 44 00 00 48 85 c0 0f 84 80 00 00 00 48 89 c3 <0f> b6 4b 37 48 8b 03 48 8d 14 cd 00 00 00 00 0f 18 08 48 29 ca RIP [<ffffffffa02b2c2c>] nf_conntrack_helper_unregister+0x16c/0x320 [nf_conntrack]
RSP <ffff88013982fe68>
CR2: 0000000000000038
---[ end trace bc3a0ede3d0084db ]---
Zdenek
Quoted 104 lines · Zdenek Kabelac
2009/8/13 Zdenek Kabelac <[email protected]>:
Quoted 36 lines
2009/8/13 Christoph Lameter <[email protected]>:
Quoted 9 lines · Zdenek Kabelac
Quoted 6 lines
Quoted 3 lines
I've added authors of some recent conntrack commits to Cc: - maybe they might know?
I've tested v2.6.30 - and it's crashing in the same way - so any other starting point where slub has the same detection mechanism and conntrack module should be working reliable ?
Next point is 2.6.29.
Ok - played lengthy game between 2.6.29 which appeared to be ok and 2.6.30
And the winner is:
ea781f197d6a835cbb93a0bf88ee1696296ed8aa
netfilter:nf_conntrack: useSLAB_DESTROY_BY_RCUand get rid ofcall_rcu()The error is actually being hit by libvirtd networking rules added during boot for my kvm usage.
(Which I noticed after some time... leading my game into wrong direction ;))....Here are the some last bisect entries:
git bisect bad
54dc79fe0d895758bdaa1dcf8512d3d21263d105
# bad: [5c0de29d06318ec8f6e3ba0d17d62529dbbdc1e8] netfilter:nf_conntrack: add generic function to get len of generic policy
git bisect bad5c0de29d06318ec8f6e3ba0d17d62529dbbdc1e8
# good: [e487eb99cf9381a4f8254fa01747a85818da612b] netlink: addnla_policy_len()git bisect goode487eb99cf9381a4f8254fa01747a85818da612b
# good: [1f9352ae2253a97b07b34dcf16ffa3b4ca12c558] netfilter:
{ip,ip6,arp}_tables: fix incorrect loop detection
git bisect good1f9352ae2253a97b07b34dcf16ffa3b4ca12c558
# bad: [2732c4e45bb67006fdc9ae6669be866762711ab5] netfilter:
ctnetlink: allocate right-sized ctnetlink skb
git bisect bad2732c4e45bb67006fdc9ae6669be866762711ab5Quoted 5 lines
Unfortunately the commit cannot be reverted with current tree - thus I cannot easily check if it's the only problem.
(warning: too many files (created: 3096 deleted: 1096), skipping inexact rename detection
Automatic revert failed. After resolving the conflicts,)Hmm after checking today with serial cable attached - it looks like I've tracked the problem but to the wrong commit - my original 'slub' error was now actually something else - so there are most probably two kinds of problem - as with this kernel the
nf_conntrack_ipv4fails to register tcp so it's not loaded at all.
This might get fixed later, but different error was there.I'll need to play the game again and check when I'll start to get the same slub oops/
Here is the second oops I've got with 2.6.29-rc5 kernel:
IP: [<
ffffffffa02b2c2c>]nf_conntrack_helper_unregister+0x16c/0x320[nf_conntrack]
PGD13bfb1067PUD1384c8067PMD 0Oops: 0000 [#1] SMP DEBUG_PAGEALLOC last sysfs file: /sys/module/nf_conntrack_ftp/refcnt CPU 0 Modules linked in: sit tunnel4 nf_defrag_ipv4 bridge stp llc autofs4ipv6
nf_conntrack_ftp(-)nf_conntrackbinfmt_miscloopdm_mirrordm_region_hashdm_logdm_modkvm_intelkvm i915 drmi2c_algo_bituinputi2c_i801arc4 ecb cryptomgr aeadcrypto_blkciphercrypto_hashcrypto_algapiiwl3945 iwlcore mac80211 videothinkpad_acpii2c_coresr_modrfkillled_classevdeviTCO_wdtbacklight usbhid hid cfg80211iTCO_vendor_supporte1000e psmouseserio_rawcdrom outputrtc_cmosrtc_corebatteryintel_agpnvramrtc_libbutton acuhci_hcdohci_hcdehci_hcdusbcore [last unloaded:x_tables]
Pid: 2824, comm: modprobe Not tainted 2.6.29-rc5-00889-gea781f1 #25 6464CTORIP: 0010:[<ffffffffa02b2c2c>] [<ffffffffa02b2c2c>] nf_conntrack_helper_unregister+0x16c/0x320 [nf_conntrack] RSP: 0018:ffff88013982fe68 EFLAGS: 00010202 RAX: 0000000000000200 RBX: 0000000000000001 RCX: ffffffffa02b2b31 RDX: 00000000000001ff RSI: 8f5c28f5c28f5c29 RDI: 0000000000000001 RBP: ffff88013982feb8 R08: 0000000000000000 R09: 0000000000000000 R10: 000000000000006d R11: 0000000000000000 R12: ffffffffa02c6a00 R13: ffffffffa02c71a0 R14: ffffffff81188e20 R15: ffff88013982fe78 FS: 00007ffbd4984700(0000) GS:ffffffff8092e040(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000038 CR3: 000000013779b000 CR4: 00000000000026e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process modprobe (pid: 2824, threadinfo ffff88013982e000, task ffff880138710000) Stack: ffff88013982fe88 0000020080271bf2 ffffffff806a47c0 0000000000000246 ffff88013982fe98 ffffffffa02c6a00 0000000000000000 ffffffffa02c71a0 0000000000000000 000000000040f510 ffff88013982fed8 ffffffffa02c502f Call Trace: [<ffffffffa02c502f>] nf_conntrack_ftp_fini+0x2f/0x70 [nf_conntrack_ftp] [<ffffffff8027bcc5>] sys_delete_module+0x1a5/0x270 [<ffffffff8020d329>] ? retint_swapgs+0xe/0x13 [<ffffffff80271bf2>] ? trace_hardirqs_on_caller+0x162/0x1b0 [<ffffffff80292121>] ? audit_syscall_entry+0x191/0x1c0 [<ffffffff80526dae>] ? trace_hardirqs_on_thunk+0x3a/0x3f [<ffffffff8020c84b>] system_call_fastpath+0x16/0x1b Code: c6 00 00 0f 82 66 ff ff ff 49 8b 9e d8 05 00 00 48 85 db 75 16e9 8e 00 00 00 0f 1f 44 00 00 48 85 c0 0f 84 80 00 00 00 48 89 c3 <0f> b6 4b 37 48 8b 03 48 8d 14 cd 00 00 00 00 0f 18 08 48 29 ca RIP [<
ffffffffa02b2c2c>]nf_conntrack_helper_unregister+0x16c/0x320[nf_conntrack]
RSP <ffff88013982fe68>
CR2: 0000000000000038
Quoted 3 lines
---[ end trace bc3a0ede3d0084db ]---Zdenek
Hello Zdenek
I am currently traveling and wont be able to help you before next week.
I added netdev, Patrick, and netfilter-devel in CC so that more eyes can take a look.
Thank you
Quoted 17 lines · Eric Dumazet
Quoted 8 lines · Zdenek Kabelac
[<ffffffffa02c502f>] nf_conntrack_ftp_fini+0x2f/0x70 [nf_conntrack_ftp] [<ffffffff8027bcc5>] sys_delete_module+0x1a5/0x270 [<ffffffff8020d329>] ? retint_swapgs+0xe/0x13 [<ffffffff80271bf2>] ? trace_hardirqs_on_caller+0x162/0x1b0 [<ffffffff80292121>] ? audit_syscall_entry+0x191/0x1c0 [<ffffffff80526dae>] ? trace_hardirqs_on_thunk+0x3a/0x3f [<ffffffff8020c84b>] system_call_fastpath+0x16/0x1b Code: c6 00 00 0f 82 66 ff ff ff 49 8b 9e d8 05 00 00 48 85 db 75 16Quoted 8 lines
e9 8e 00 00 00 0f 1f 44 00 00 48 85 c0 0f 84 80 00 00 00 48 89 c3 <0f> b6 4b 37 48 8b 03 48 8d 14 cd 00 00 00 00 0f 18 08 48 29 ca RIP [<
ffffffffa02b2c2c>]nf_conntrack_helper_unregister+0x16c/0x320[nf_conntrack]
RSP <ffff88013982fe68>
CR2: 0000000000000038---[ end trace bc3a0ede3d0084db ]---
Quoted 3 lines
I am currently traveling and wont be able to help you before next week.
I added netdev, Patrick, and netfilter-devel in CC so that more eyes can take a look.
Thanks for the report, I'll have a look at this. Zdenek, please send me the nf_conntrack.ko file used in the above oops. Thanks.
2009/8/17 Patrick McHardy <[email protected]>:
Quoted 18 lines
Quoted 17 lines · Eric Dumazet
Quoted 16 lines · Zdenek Kabelac
[<ffffffffa02c502f>] nf_conntrack_ftp_fini+0x2f/0x70 [nf_conntrack_ftp] [<ffffffff8027bcc5>] sys_delete_module+0x1a5/0x270 [<ffffffff8020d329>] ? retint_swapgs+0xe/0x13 [<ffffffff80271bf2>] ? trace_hardirqs_on_caller+0x162/0x1b0 [<ffffffff80292121>] ? audit_syscall_entry+0x191/0x1c0 [<ffffffff80526dae>] ? trace_hardirqs_on_thunk+0x3a/0x3f [<ffffffff8020c84b>] system_call_fastpath+0x16/0x1b Code: c6 00 00 0f 82 66 ff ff ff 49 8b 9e d8 05 00 00 48 85 db 75 16e9 8e 00 00 00 0f 1f 44 00 00 48 85 c0 0f 84 80 00 00 00 48 89 c3 <0f> b6 4b 37 48 8b 03 48 8d 14 cd 00 00 00 00 0f 18 08 48 29 ca RIP [<ffffffffa02b2c2c>]
nf_conntrack_helper_unregister+0x16c/0x320[nf_conntrack]
RSP <ffff88013982fe68>
CR2: 0000000000000038---[ end trace bc3a0ede3d0084db ]---
Quoted 7 lines
Quoted 3 lines
I am currently traveling and wont be able to help you before next week.
I added netdev, Patrick, and netfilter-devel in CC so that more eyes can take a look.
Thanks for the report, I'll have a look at this. Zdenek, please send me the nf_conntrack.ko file used in the above oops. Thanks.
Ok
I've found the solution for my problem.
http://thread.gmane.org/gmane.comp.security.firewalls.netfilter.devel/30483
I've made this small fix from this thread:
net/netfilter/nf_conntrack_core.c +2 -1
@@ -1108,6 +1108,7 @@ static void nf_conntrack_cleanup_init_net(void) {nf_conntrack_helper_fini ();nf_conntrack_proto_fini (); +rcu_barrier ();kmem_cache_destroy (nf_conntrack_cachep); }
@@ -1266,7 +1267,7 @@ static int nf_conntrack_init_init_net(void) nf_conntrack_cachep =kmem_cache_create ("nf_conntrack" ,sizeof (struct nf_conn ), -0 ,SLAB_DESTROY_BY_RCU ,NULL ); +0 ,0 ,NULL );if (!nf_conntrack_cachep) {printk (KERN_ERR "Unable to create nf_conn slab cache\n" ); ret = -ENOMEM ;
As the thread nf_conntrack: Use rcu_barrier() and fix kmem_cache_create flags seems to be samewhat 'unfinished' and already a bit old and I've no idea whether it actually fixes problem completely or just hides it in my case - I'm leaving it to some RCU gurus to fix this issue.
All I could say is - this this extra rcu_barrier() and removal of SLAB_DESTROY removes my GPF on reboot.
Zdenek
Quoted 62 lines · Zdenek Kabelac
2009/8/17 Patrick McHardy <[email protected]>:
Quoted 18 lines
Quoted 17 lines · Eric Dumazet
Quoted 16 lines · Zdenek Kabelac
[<ffffffffa02c502f>] nf_conntrack_ftp_fini+0x2f/0x70 [nf_conntrack_ftp] [<ffffffff8027bcc5>] sys_delete_module+0x1a5/0x270 [<ffffffff8020d329>] ? retint_swapgs+0xe/0x13 [<ffffffff80271bf2>] ? trace_hardirqs_on_caller+0x162/0x1b0 [<ffffffff80292121>] ? audit_syscall_entry+0x191/0x1c0 [<ffffffff80526dae>] ? trace_hardirqs_on_thunk+0x3a/0x3f [<ffffffff8020c84b>] system_call_fastpath+0x16/0x1b Code: c6 00 00 0f 82 66 ff ff ff 49 8b 9e d8 05 00 00 48 85 db 75 16e9 8e 00 00 00 0f 1f 44 00 00 48 85 c0 0f 84 80 00 00 00 48 89 c3 <0f> b6 4b 37 48 8b 03 48 8d 14 cd 00 00 00 00 0f 18 08 48 29 ca RIP [<
ffffffffa02b2c2c>]nf_conntrack_helper_unregister+0x16c/0x320[nf_conntrack]
RSP <ffff88013982fe68>
CR2: 0000000000000038---[ end trace bc3a0ede3d0084db ]---Quoted 6 lines
Quoted 3 lines
I am currently traveling and wont be able to help you before next week.
I added netdev, Patrick, and netfilter-devel in CC so that more eyes can take a look.
Thanks for the report, I'll have a look at this. Zdenek, please send me the nf_conntrack.ko file used in the above oops. Thanks.
Ok
I've found the solution for my problem.
http://thread.gmane.org/gmane.comp.security.firewalls.netfilter.devel/30483
I've made this small fix from this thread:
net/netfilter/nf_conntrack_core.c +2
-1@@ -1108,6 +1108,7 @@ static void nf_conntrack_cleanup_init_net(void) {nf_conntrack_helper_fini ();nf_conntrack_proto_fini (); +rcu_barrier ();kmem_cache_destroy (nf_conntrack_cachep); }@@ -1266,7 +1267,7 @@ static int nf_conntrack_init_init_net(void) nf_conntrack_cachep =kmem_cache_create ("nf_conntrack" ,sizeof (struct nf_conn ), -0 ,SLAB_DESTROY_BY_RCU ,NULL ); +0 ,0 ,NULL );if (!nf_conntrack_cachep) {printk (KERN_ERR "Unable to create nf_conn slab cache\n" ); ret = -ENOMEM ;As the thread
nf_conntrack: Usercu_barrier()and fixkmem_cache_createflags seems to be samewhat 'unfinished' and already a bit old and I've no idea whether it actually fixes problem completely or just hides it in my case - I'm leaving it to some RCU gurus to fix this issue.
Quoted 4 lines
All I could say is - this this extra
rcu_barrier()and removal ofSLAB_DESTROYremoves my GPF on reboot.Zdenek
Ouch..
Dont think such a patch makes your kernel better, it'll crash too.
You cannot remove SLAB_DESTROY_BY_RCU like this, it's there for very good reasons.
2009/9/3 Eric Dumazet <[email protected]>:
Quoted 66 lines
Quoted 65 lines · Zdenek Kabelac
2009/8/17 Patrick McHardy <[email protected]>:
Quoted 18 lines
Quoted 17 lines · Eric Dumazet
Quoted 16 lines · Zdenek Kabelac
[<ffffffffa02c502f>] nf_conntrack_ftp_fini+0x2f/0x70 [nf_conntrack_ftp] [<ffffffff8027bcc5>] sys_delete_module+0x1a5/0x270 [<ffffffff8020d329>] ? retint_swapgs+0xe/0x13 [<ffffffff80271bf2>] ? trace_hardirqs_on_caller+0x162/0x1b0 [<ffffffff80292121>] ? audit_syscall_entry+0x191/0x1c0 [<ffffffff80526dae>] ? trace_hardirqs_on_thunk+0x3a/0x3f [<ffffffff8020c84b>] system_call_fastpath+0x16/0x1b Code: c6 00 00 0f 82 66 ff ff ff 49 8b 9e d8 05 00 00 48 85 db 75 16e9 8e 00 00 00 0f 1f 44 00 00 48 85 c0 0f 84 80 00 00 00 48 89 c3 <0f> b6 4b 37 48 8b 03 48 8d 14 cd 00 00 00 00 0f 18 08 48 29 ca RIP [<ffffffffa02b2c2c>]
nf_conntrack_helper_unregister+0x16c/0x320[nf_conntrack]
RSP <ffff88013982fe68>
CR2: 0000000000000038---[ end trace bc3a0ede3d0084db ]---Quoted 6 lines
Quoted 3 lines
I am currently traveling and wont be able to help you before next week.
I added netdev, Patrick, and netfilter-devel in CC so that more eyes can take a look.
Thanks for the report, I'll have a look at this. Zdenek, please send me the nf_conntrack.ko file used in the above oops. Thanks.
Ok
I've found the solution for my problem.
http://thread.gmane.org/gmane.comp.security.firewalls.netfilter.devel/30483
I've made this small fix from this thread:
net/netfilter/nf_conntrack_core.c +2
-1@@ -1108,6 +1108,7 @@ static void nf_conntrack_cleanup_init_net(void) { nf_conntrack_helper_fini(); nf_conntrack_proto_fini(); + rcu_barrier(); kmem_cache_destroy(nf_conntrack_cachep); }@@ -1266,7 +1267,7 @@ static int nf_conntrack_init_init_net(void) nf_conntrack_cachep = kmem_cache_create("nf_conntrack", sizeof(struct nf_conn), - 0, SLAB_DESTROY_BY_RCU, NULL); + 0, 0, NULL); if (!nf_conntrack_cachep) { printk(KERN_ERR "Unable to create nf_conn slab cache\n"); ret = -ENOMEM;As the thread
nf_conntrack: Usercu_barrier()and fixkmem_cache_createflags seems to be samewhat 'unfinished' and already a bit old and I've no idea whether it actually fixes problem completely or just hides it in my case - I'm leaving it to some RCU gurus to fix this issue.All I could say is - this this extra
rcu_barrier()and removal ofSLAB_DESTROYremoves my GPF on reboot.
Quoted 8 lines
Quoted 1 line
Zdenek
Ouch..
Dont think such a patch makes your kernel better, it'll crash too.
You cannot remove
SLAB_DESTROY_BY_RCUlike this, it's there for very good reasons.
Well I'm not noticing any ill behavior - also note - rcu_barrier() is there before the cache is destroyed.
But as I said - it's just my shot into the dark - which seems to work for me...
Zdenek
PATCH 1/1 slub: fix slab_pad_check() and SLAB_DESTROY_BY_RCU
Quoted 5 lines · Zdenek Kabelac
Well I'm not noticing any ill behavior - also note -
rcu_barrier()is there before the cache is destroyed.
But as I said - it's just my shot into the dark - which seems to work for me...
Reading again your traces, I do believe there are two bugs in slub
Maybe not explaining your problem, but worth to fix !
Thank you
[PATCH] slub: fix slab_pad_check() and SLAB_DESTROY_BY_RCU
When SLAB_POISON is used and slab_pad_check() finds an overwrite of the slab padding, we call restore_bytes() on the whole slab, not only on the padding.
kmem_cache_destroy() should call rcu_barrier() *after* kmem_cache_close() and *before* sysfs_slab_remove() or risk rcu_free_slab() being called after kmem_cache is deleted (kfreed).
rmmod nf_conntrack can crash the machine because it has to kmem_cache_destroy() a SLAB_DESTROY_BY_RCU enabled cache.
---
mm/slub.c +3 -3
@@ -646,7 +646,7 @@ static int slab_pad_check(struct kmem_cache *s, struct page *page)slab_err (s, page,"Padding overwritten. 0x%p-0x%p" , fault, end -1 );print_section ("Padding" , end - remainder, remainder); -restore_bytes (s,"slab padding" ,POISON_INUSE , start, end); +restore_bytes (s,"slab padding" ,POISON_INUSE , end - remainder, end);return 0 ; }
@@ -2594,8 +2594,6 @@ static inline int kmem_cache_close(struct kmem_cache *s)*/ void kmem_cache_destroy (struct kmem_cache *s) { -if (s->flags &SLAB_DESTROY_BY_RCU ) -rcu_barrier ();down_write (&slub_lock); s->refcount--;if (!s->refcount) {
@@ -2606,6 +2604,8 @@ void kmem_cache_destroy(struct kmem_cache *s) "still has objects.\n", s->name, __func__);dump_stack (); } +if (s->flags &SLAB_DESTROY_BY_RCU ) +rcu_barrier ();sysfs_slab_remove (s); }else up_write (&slub_lock);
Re: [PATCH] slub: fix slab_pad_check() and SLAB_DESTROY_BY_RCU
Quoted 34 lines · Eric Dumazet
Quoted 5 lines · Zdenek Kabelac
Well I'm not noticing any ill behavior - also note -
rcu_barrier()is there before the cache is destroyed.
But as I said - it's just my shot into the dark - which seems to work for me...Reading again your traces, I do believe there are two bugs in slub
Maybe not explaining your problem, but worth to fix !
Thank you
[PATCH] slub: fix
slab_pad_check()andSLAB_DESTROY_BY_RCUWhen
SLAB_POISONis used andslab_pad_check()finds an overwrite of the slab padding, we callrestore_bytes()on the whole slab, not only on the padding.
kmem_cache_destroy()should callrcu_barrier()*after*kmem_cache_close()and *before*sysfs_slab_remove()or riskrcu_free_slab()being called afterkmem_cacheis deleted (kfreed).rmmod
nf_conntrackcan crash the machine because it has tokmem_cache_destroy()aSLAB_DESTROY_BY_RCUenabled cache.Reported-by Zdenek Kabelac <[email protected]>Signed-off-by Eric Dumazet <[email protected]>---
mm/slub.c +0
-0
mm/slub.c static int slab_pad_check(struct kmem_cache *s, struct page *page) · line 649
Quoted 5 lines
mm/slub.c +1
-1@@ -646,7 +646,7 @@ static int slab_pad_check(struct kmem_cache *s, struct page *page) slab_err(s, page, "Padding overwritten. 0x%p-0x%p", fault, end - 1); print_section("Padding", end - remainder, remainder); - restore_bytes(s, "slab padding", POISON_INUSE, start, end); + restore_bytes(s, "slab padding", POISON_INUSE, end - remainder, end);
OK, makes sense.
Quoted 13 lines
mm/slub.c +0
-2return 0; }@@ -2594,8 +2594,6 @@ static inline int kmem_cache_close(struct kmem_cache *s)*/ void kmem_cache_destroy(struct kmem_cache *s) { - if (s->flags & SLAB_DESTROY_BY_RCU) - rcu_barrier(); down_write(&slub_lock); s->refcount--; if (!s->refcount) {
mm/slub.c void kmem_cache_destroy(struct kmem_cache *s) · line 2611
Quoted 8 lines
mm/slub.c +2
-0@@ -2606,6 +2604,8 @@ void kmem_cache_destroy(struct kmem_cache *s) "still has objects.\n", s->name, __func__); dump_stack(); } + if (s->flags & SLAB_DESTROY_BY_RCU) + rcu_barrier(); sysfs_slab_remove(s); } else up_write(&slub_lock);
The rcu_barrier() call was added by this commit:
I guess we should CC Paul as well.
--
To unsubscribe from this list: send the line "unsubscribe netfilter-devel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH] slub: fix slab_pad_check() and SLAB_DESTROY_BY_RCU
Quoted 65 lines · Pekka Enberg
Quoted 32 lines · Eric Dumazet
Quoted 4 lines · Zdenek Kabelac
Well I'm not noticing any ill behavior - also note -
rcu_barrier()is there before the cache is destroyed.
But as I said - it's just my shot into the dark - which seems to work for me...Reading again your traces, I do believe there are two bugs in slub
Maybe not explaining your problem, but worth to fix !
Thank you
[PATCH] slub: fix
slab_pad_check()andSLAB_DESTROY_BY_RCUWhen
SLAB_POISONis used andslab_pad_check()finds an overwrite of the slab padding, we callrestore_bytes()on the whole slab, not only on the padding.
kmem_cache_destroy()should callrcu_barrier()*after*kmem_cache_close()and *before*sysfs_slab_remove()or riskrcu_free_slab()being called afterkmem_cacheis deleted (kfreed).rmmod
nf_conntrackcan crash the machine because it has tokmem_cache_destroy()aSLAB_DESTROY_BY_RCUenabled cache.Reported-by Zdenek Kabelac <[email protected]>Signed-off-by Eric Dumazet <[email protected]>---
mm/slub.c +0
-0mm/slub.c static int slab_pad_check(struct kmem_cache *s, struct page *page) · line 649
Quoted 5 lines
mm/slub.c +1
-1@@ -646,7 +646,7 @@ static int slab_pad_check(struct kmem_cache *s, struct page *page)slab_err (s, page,"Padding overwritten. 0x%p-0x%p" , fault, end -1 );print_section ("Padding" , end - remainder, remainder); -restore_bytes (s,"slab padding" ,POISON_INUSE , start, end); +restore_bytes (s,"slab padding" ,POISON_INUSE , end - remainder, end);OK, makes sense.
Quoted 13 lines
mm/slub.c +0
-2return 0 ; }@@ -2594,8 +2594,6 @@ static inline int kmem_cache_close(struct kmem_cache *s)*/ void kmem_cache_destroy (struct kmem_cache *s) { -if (s->flags &SLAB_DESTROY_BY_RCU ) -rcu_barrier ();down_write (&slub_lock); s->refcount--;if (!s->refcount) {mm/slub.c void kmem_cache_destroy(struct kmem_cache *s) · line 2611
Quoted 8 lines
mm/slub.c +2
-0@@ -2606,6 +2604,8 @@ void kmem_cache_destroy(struct kmem_cache *s) "still has objects.\n", s->name, __func__);dump_stack (); } +if (s->flags &SLAB_DESTROY_BY_RCU ) +rcu_barrier ();sysfs_slab_remove (s); }else up_write (&slub_lock);The
rcu_barrier()call was added by this commit:
Quoted 3 lines
I guess we should CC Paul as well.
Sure !
rcu_barrier() is definitly better than synchronize_rcu() in kmem_cache_destroy()
But its location was not really right (for SLUB at least)
SLAB_DESTROY_BY_RCU means subsystem will call kfree(elems) without waiting RCU grace period.
By the time subsystem calls kmem_cache_destroy(), all previously allocated elems must have already be kfreed() by this subsystem.
We must however wait that all slabs, queued for freeing by rcu_free_slab(), are indeed freed, since this freeing needs access to kmem_cache pointer.
As kmem_cache_close() might clean/purge the cache and call rcu_free_slab(), we must call rcu_barrier() *after* kmem_cache_close(), and before kfree(kmem_cache *s)
Alternatively we could delay this final kfree(s) (with call_rcu()) but would have to copy s->name in kmem_cache_create() instead of keeping a pointer to
a string that might be in a module, and freed at rmmod time.
Given that there is few uses in current tree that call kmem_cache_destroy() on a SLAB_DESTROY_BY_RCU cache, there is no need to try to optimize this rcu_barrier() call, unless we want superfast reboot/halt sequences...
--
To unsubscribe from this list: send the line "unsubscribe netfilter-devel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH] slub: fix slab_pad_check() and SLAB_DESTROY_BY_RCU
Hi Eric,
Quoted 25 lines · Eric Dumazet
Quoted 5 lines
The
rcu_barrier()call was added by this commit:I guess we should CC Paul as well.
Sure !
rcu_barrier()is definitly better thansynchronize_rcu()inkmem_cache_destroy()But its location was not really right (for SLUB at least)
SLAB_DESTROY_BY_RCUmeans subsystem will call kfree(elems) without waiting RCU grace period.By the time subsystem calls
kmem_cache_destroy(), all previously allocated elems must have already bekfreed()by this subsystem.We must however wait that all slabs, queued for freeing by
rcu_free_slab(), are indeed freed, since this freeing needs access tokmem_cachepointer.As
kmem_cache_close()might clean/purge the cache and callrcu_free_slab(), we must callrcu_barrier()*after*kmem_cache_close(), and beforekfree(kmem_cache *s)
Quoted 7 lines
Alternatively we could delay this final kfree(s) (with
call_rcu()) but would have to copys->nameinkmem_cache_create()instead of keeping a pointer to a string that might be in a module, and freed at rmmod time.Given that there is few uses in current tree that call
kmem_cache_destroy()on aSLAB_DESTROY_BY_RCUcache, there is no need to try to optimize thisrcu_barrier()call, unless we want superfast reboot/halt sequences...
Oh, sure, the fix looks sane to me. It's just that I am a complete coward when it comes to merging RCU related patches so I always try to fish an Acked-by from Paul or Christoph ;).
Pekka
Re: [PATCH] slub: fix slab_pad_check() and SLAB_DESTROY_BY_RCU
Quoted 3 lines · Pekka Enberg
Oh, sure, the fix looks sane to me. It's just that I am a complete coward when it comes to merging RCU related patches so I always try to fish an Acked-by from Paul or Christoph ;).
I am fine with acking the poison piece.
I did not ack the patch that added rcu to kmem_cache_destroy() and I likely wont ack that piece either.
Re: [PATCH] slub: fix slab_pad_check() and SLAB_DESTROY_BY_RCU
Hi Christoph,
Quoted 3 lines · Pekka Enberg
Quoted 3 lines
Oh, sure, the fix looks sane to me. It's just that I am a complete coward when it comes to merging RCU related patches so I always try to fish an Acked-by from Paul or Christoph ;).
Quoted 1 line · Christoph Lameter
I am fine with acking the poison piece.
Ok.
Quoted 2 lines · Christoph Lameter
I did not ack the patch that added rcu to
kmem_cache_destroy()and I likely wont ack that piece either.
Right. I didn't remember that I merged that over your NAK but I don't share your view that kmem_cache_destroy() callers should do rcu_barrier() or whatever is necessary if we can do it from kmem_cache_destroy(). So I am happy to take both changes but I would appreciate them being split into two separate patches.
Pekka
PATCH 1/1 slub: Fix kmem_cache_destroy() with SLAB_DESTROY_BY_RCU
Quoted 15 lines · Pekka Enberg
Hi Christoph,
Quoted 3 lines · Pekka Enberg
Quoted 3 lines
Oh, sure, the fix looks sane to me. It's just that I am a complete coward when it comes to merging RCU related patches so I always try to fish an Acked-by from Paul or Christoph ;).
Quoted 1 line · Christoph Lameter
I am fine with acking the poison piece.
Ok.
On Thu, Sep 3, 2009 at 8:50 PM, Christoph
Lameter<[email protected]> wrote:
Quoted 9 lines
Quoted 2 lines
I did not ack the patch that added rcu to
kmem_cache_destroy()and I likely wont ack that piece either.Right. I didn't remember that I merged that over your NAK but I don't share your view that
kmem_cache_destroy()callers should dorcu_barrier()or whatever is necessary if we can do it fromkmem_cache_destroy(). So I am happy to take both changes but I would appreciate them being split into two separate patches.
Here is the second patch (RCU thing). Stable candidate
[PATCH] slub: Fix kmem_cache_destroy() with SLAB_DESTROY_BY_RCU
kmem_cache_destroy() should call rcu_barrier() *after* kmem_cache_close() and *before* sysfs_slab_remove() or risk rcu_free_slab() being called after kmem_cache is deleted (kfreed).
rmmod nf_conntrack can crash the machine because it has to kmem_cache_destroy() a SLAB_DESTROY_BY_RCU enabled cache.
---
mm/slub.c +2 -2
@@ -2594,8 +2594,6 @@ static inline int kmem_cache_close(struct kmem_cache *s)*/ void kmem_cache_destroy (struct kmem_cache *s) { -if (s->flags &SLAB_DESTROY_BY_RCU ) -rcu_barrier ();down_write (&slub_lock); s->refcount--;if (!s->refcount) {
@@ -2606,6 +2604,8 @@ void kmem_cache_destroy(struct kmem_cache *s) "still has objects.\n", s->name, __func__);dump_stack (); } +if (s->flags &SLAB_DESTROY_BY_RCU ) +rcu_barrier ();sysfs_slab_remove (s); }else up_write (&slub_lock);
Re: [PATCH] slub: Fix kmem_cache_destroy() with SLAB_DESTROY_BY_RCU
Quoted 10 lines · Eric Dumazet
Here is the second patch (RCU thing). Stable candidate
[PATCH] slub: Fix
kmem_cache_destroy()withSLAB_DESTROY_BY_RCU
kmem_cache_destroy()should callrcu_barrier()*after*kmem_cache_close()and *before*sysfs_slab_remove()or riskrcu_free_slab()being called afterkmem_cacheis deleted (kfreed).rmmod
nf_conntrackcan crash the machine because it has tokmem_cache_destroy()aSLAB_DESTROY_BY_RCUenabled cache.
Do we have a bugzilla URL for this?
Quoted 3 lines
Reported-by Zdenek Kabelac <[email protected]>Signed-off-by Eric Dumazet <[email protected]>Acked-by Paul E. McKenney <[email protected]>
OK, this is in for-next now and queued for 2.6.31. If you guys want to fix this in a different way, lets do that in 2.6.32.
Pekka
Re: [PATCH] slub: Fix kmem_cache_destroy() with SLAB_DESTROY_BY_RCU
Quoted 5 lines · Pekka Enberg
Quoted 4 lines · Eric Dumazet
Here is the second patch (RCU thing). Stable candidate
[PATCH] slub: Fix
kmem_cache_destroy()withSLAB_DESTROY_BY_RCU
Quoted 8 lines
Quoted 6 lines
kmem_cache_destroy()should callrcu_barrier()*after*kmem_cache_close()and *before*sysfs_slab_remove()or riskrcu_free_slab()being called afterkmem_cacheis deleted (kfreed).rmmod
nf_conntrackcan crash the machine because it has tokmem_cache_destroy()aSLAB_DESTROY_BY_RCUenabled cache.Do we have a bugzilla URL for this?
Well, I can crash my 2.6.30.5 machine just doing rmmod nf_conntrack
(You'll need CONFIG_SLUB_DEBUG_ON or equivalent)
Original Zdenek report : http://thread.gmane.org/gmane.linux.kernel/876016/focus=876086
Quoted 7 lines
Quoted 4 lines
Reported-by Zdenek Kabelac <[email protected]>Signed-off-by Eric Dumazet <[email protected]>Acked-by Paul E. McKenney <[email protected]>OK, this is in for-next now and queued for 2.6.31. If you guys want to fix this in a different way, lets do that in 2.6.32.
Seems the right thing IMHO
--
To unsubscribe from this list: send the line "unsubscribe netfilter-devel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH] slub: fix slab_pad_check() and SLAB_DESTROY_BY_RCU
In reply to Eric DumazetQuoted 2 lines · Eric Dumazet
on a
SLAB_DESTROY_BY_RCUcache, there is no need to try to optimize thisrcu_barrier()call, unless we want superfast reboot/halt sequences...
I stilll think that the action to quiesce rcu is something that the caller of kmem_cache_destroy must take care of.
Could you split this into two patches: One that addresses the poison and another that deals with rcu?
PATCH 1/1 slub: fix slab_pad_check()
Quoted 7 lines · Christoph Lameter
Quoted 2 lines · Eric Dumazet
on a
SLAB_DESTROY_BY_RCUcache, there is no need to try to optimize thisrcu_barrier()call, unless we want superfast reboot/halt sequences...I stilll think that the action to quiesce rcu is something that the caller of
kmem_cache_destroymust take care of.
Do you mean :
if (kmem_cache_shrink(s) == 0) {
rcu_barrier();
kmem_cache_destroy_no_rcu_barrier(s);
} else {
kmem_cache_destroy_with_rcu_barrier_because_SLAB_DESTROY_BY_RCU_cache(s);
}What would be the point ?
Quoted 4 lines
Could you split this into two patches: One that addresses the poison and another that deals with rcu?
Sure, here is the poison thing
[PATCH] slub: fix slab_pad_check()
When SLAB_POISON is used and slab_pad_check() finds an overwrite of the slab padding, we call restore_bytes() on the whole slab, not only on the padding.
---
mm/slub.c +1 -1
@@ -646,7 +646,7 @@ static int slab_pad_check(struct kmem_cache *s, struct page *page)slab_err (s, page,"Padding overwritten. 0x%p-0x%p" , fault, end -1 );print_section ("Padding" , end - remainder, remainder); -restore_bytes (s,"slab padding" ,POISON_INUSE , start, end); +restore_bytes (s,"slab padding" ,POISON_INUSE , end - remainder, end);return 0 ; }
Re: [PATCH] slub: fix slab_pad_check()
Quoted 11 lines · Eric Dumazet
Christoph Lameter a ?crit :
Quoted 7 lines · Eric Dumazet
Quoted 3 lines
on a
SLAB_DESTROY_BY_RCUcache, there is no need to try to optimize thisrcu_barrier()call, unless we want superfast reboot/halt sequences...I stilll think that the action to quiesce rcu is something that the caller of
kmem_cache_destroymust take care of.Do you mean :
Quoted 8 lines
if (kmem_cache_shrink(s) == 0) { rcu_barrier(); kmem_cache_destroy_no_rcu_barrier(s); } else { kmem_cache_destroy_with_rcu_barrier_because_SLAB_DESTROY_BY_RCU_cache(s); }What would be the point ?
The above is port of slub?
I mean that (in this case) the net subsystem would have to deal with RCU quietness before disposing of the slab cache. There may be multiple ways of dealing with RCU. The RCU barrier may be unnecessary for future uses. Typically one would expect that all deferred handling of structures must be complete for correctness before disposing of the whole cache.
Quoted 1 line
[PATCH] slub: fix
slab_pad_check()
Re: [PATCH] slub: fix slab_pad_check()
Quoted 22 lines · Christoph Lameter
Quoted 11 lines · Eric Dumazet
Christoph Lameter a ?crit :
Quoted 7 lines · Eric Dumazet
Quoted 3 lines
on a
SLAB_DESTROY_BY_RCUcache, there is no need to try to optimize thisrcu_barrier()call, unless we want superfast reboot/halt sequences...I stilll think that the action to quiesce rcu is something that the caller of
kmem_cache_destroymust take care of.Do you mean :
Quoted 8 lines
if (kmem_cache_shrink(s) == 0) { rcu_barrier(); kmem_cache_destroy_no_rcu_barrier(s); } else { kmem_cache_destroy_with_rcu_barrier_because_SLAB_DESTROY_BY_RCU_cache(s); }What would be the point ?
Quoted 7 lines
The above is port of slub?
I mean that (in this case) the net subsystem would have to deal with RCU quietness before disposing of the slab cache. There may be multiple ways of dealing with RCU. The RCU barrier may be unnecessary for future uses. Typically one would expect that all deferred handling of structures must be complete for correctness before disposing of the whole cache.
Which is precisely the point of the rcu_barrier(), right?
Thanx, Paul
Quoted 7 lines
Quoted 1 line
[PATCH] slub: fix
slab_pad_check()--
To unsubscribe from this list: send the line "unsubscribe netfilter-devel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH] slub: fix slab_pad_check()
In reply to Christoph LameterQuoted 18 lines · Christoph Lameter
Quoted 16 lines · Eric Dumazet
Christoph Lameter a ?crit :
Quoted 6 lines · Eric Dumazet
Quoted 3 lines
on a
SLAB_DESTROY_BY_RCUcache, there is no need to try to optimize thisrcu_barrier()call, unless we want superfast reboot/halt sequences...I stilll think that the action to quiesce rcu is something that the caller of
kmem_cache_destroymust take care of.Do you mean :
if (kmem_cache_shrink(s) == 0) { rcu_barrier(); kmem_cache_destroy_no_rcu_barrier(s); } else { kmem_cache_destroy_with_rcu_barrier_because_SLAB_DESTROY_BY_RCU_cache(s); }
Quoted 3 lines
Quoted 1 line
What would be the point ?
The above is port of slub?
No, I am trying to code what you suggest, and I could not find a clean way with current API (SLAB/SLUB/SLOB)
Quoted 6 lines
I mean that (in this case) the net subsystem would have to deal with RCU quietness before disposing of the slab cache. There may be multiple ways of dealing with RCU. The RCU barrier may be unnecessary for future uses. Typically one would expect that all deferred handling of structures must be complete for correctness before disposing of the whole cache.
Point is we cannot deal with RCU quietness before disposing the slab cache, (if SLAB_DESTROY_BY_RCU was set on the cache) since this disposing *will* make call_rcu() calls when a full slab is freed/purged.
And when RCU grace period is elapsed, the callback *will* need access to the cache we want to dismantle. Better to not have kfreed()/poisoned it...
I believe you mix two RCU uses here.
1) The one we all know, is use normal caches (!SLAB_DESTROY_BY_RCU) (or kmalloc()), and use call_rcu(... kfree_something)
In this case, you are 100% right that the subsystem itself has to call rcu_barrier() (or respect whatever self-synchro) itself, before calling kmem_cache_destroy()
2) The SLAB_DESTROY_BY_RCU one.
Part of cache dismantle needs to call rcu_barrier() itself. Caller doesnt have to use rcu_barrier(). It would be a waste of time, as kmem_cache_destroy() will refill rcu wait queues with its own stuff.
Re: [PATCH] slub: fix slab_pad_check()
Quoted 3 lines · Eric Dumazet
Point is we cannot deal with RCU quietness before disposing the slab cache, (if
SLAB_DESTROY_BY_RCUwas set on the cache) since this disposing *will* makecall_rcu()calls when a full slab is freed/purged.
There is no need to do call_rcu calls for frees at that point since objects are no longer in use. We could simply disable SLAB_DESTROY_BY_RCU for the final clearing of caches.
Quoted 2 lines
And when RCU grace period is elapsed, the callback *will* need access to the cache we want to dismantle. Better to not have kfreed()/poisoned it...
But going through the RCU period is pointless since no user of the cache remains.
Quoted 9 lines
I believe you mix two RCU uses here.
1) The one we all know, is use normal caches (!SLAB_DESTROY_BY_RCU) (or
kmalloc()), and use call_rcu(...kfree_something)In this case, you are 100% right that the subsystem itself has to call
rcu_barrier()(or respect whatever self-synchro) itself, before callingkmem_cache_destroy()
Quoted 5 lines
2) The
SLAB_DESTROY_BY_RCUone.Part of cache dismantle needs to call
rcu_barrier()itself. Caller doesnt have to usercu_barrier(). It would be a waste of time, askmem_cache_destroy()will refill rcu wait queues with its own stuff.
The dismantling does not need RCU since there are no operations on the objects in progress. So simply switch DESTROY_BY_RCU off for close.
--- mm/slub.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
mm/slub.c +2 -2
@@ -2594,9 +2594,9 @@ static inline int kmem_cache_close(struc*/ void kmem_cache_destroy (struct kmem_cache *s) { -if (s->flags &SLAB_DESTROY_BY_RCU ) -rcu_barrier ();down_write (&slub_lock); +/* Stop deferring frees so that we can immediately free structures */ + s->flags &= ~SLAB_DESTROY_BY_RCU ; s->refcount--;if (!s->refcount) {list_del (&s->list);
Paul E. McKenney
NAKRe: [PATCH] slub: fix slab_pad_check()
Quoted 9 lines · Christoph Lameter
Quoted 3 lines · Eric Dumazet
Point is we cannot deal with RCU quietness before disposing the slab cache, (if
SLAB_DESTROY_BY_RCUwas set on the cache) since this disposing *will* makecall_rcu()calls when a full slab is freed/purged.There is no need to do
call_rcucalls for frees at that point since objects are no longer in use. We could simply disableSLAB_DESTROY_BY_RCUfor the final clearing of caches.
Suppose we have the following sequence of events:
1. CPU 0 is running a task that is using the slab cache.
This CPU does kmem_cache_free(), which happens to free up some memory to the system. Because SLAB_DESTROY_BY_RCU is set, an RCU callback is posted to do the actual freeing.
Please note that this RCU callback is internal to the slab, so that the slab user cannot be aware of it. In fact, the slab user isn't doing any call_rcu()s whatever.
2. CPU 0 discovers that the slab cache can now be destroyed.
It determines that there are no users, and has guaranteed that there will be no future users. So it knows that it can safely do kmem_cache_destroy().
3. In absence of rcu_barrier(), kmem_cache_destroy() would
immediately tear down the slab data structures.
4. At the end of the next grace period, the RCU callback posted
(again, internally by the slab cache) is invoked. It has a coronary due to the slab data structures having already been freed, and (worse yet) possibly reallocated for other uses.
Hence the need for the rcu_barrier() when tearing down SLAB_DESTROY_BY_RCU slab caches.
Quoted 5 lines
Quoted 2 lines
And when RCU grace period is elapsed, the callback *will* need access to the cache we want to dismantle. Better to not have kfreed()/poisoned it...
But going through the RCU period is pointless since no user of the cache remains.
Which is irrelevant. The outstanding RCU callback was posted by the slab cache itself, -not- by the user of the slab cache.
Quoted 9 lines
Quoted 9 lines
I believe you mix two RCU uses here.
1) The one we all know, is use normal caches (!SLAB_DESTROY_BY_RCU) (or
kmalloc()), and use call_rcu(...kfree_something)In this case, you are 100% right that the subsystem itself has to call
rcu_barrier()(or respect whatever self-synchro) itself, before callingkmem_cache_destroy()
Quoted 8 lines
Quoted 5 lines
2) The
SLAB_DESTROY_BY_RCUone.Part of cache dismantle needs to call
rcu_barrier()itself. Caller doesnt have to usercu_barrier(). It would be a waste of time, askmem_cache_destroy()will refill rcu wait queues with its own stuff.The dismantling does not need RCU since there are no operations on the objects in progress. So simply switch
DESTROY_BY_RCUoff for close.
Unless I am missing something, this patch re-introduces the bug that the rcu_barrier() was added to prevent. So, in absence of a better explanation of what I am missing:
NACK.
Thanx, Paul
Quoted 20 lines
--- mm/slub.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)Index:
linux-2.6/mm/slub.c
===================================================================mm/slub.c +2
-2@@ -2594,9 +2594,9 @@ static inline int kmem_cache_close(struc*/ void kmem_cache_destroy (struct kmem_cache *s) { -if (s->flags &SLAB_DESTROY_BY_RCU ) -rcu_barrier ();down_write (&slub_lock); +/* Stop deferring frees so that we can immediately free structures */ + s->flags &= ~SLAB_DESTROY_BY_RCU ; s->refcount--;if (!s->refcount) {list_del (&s->list);
Re: [PATCH] slub: fix slab_pad_check()
Quoted 8 lines · Paul E. McKenney
2. CPU 0 discovers that the slab cache can now be destroyed.
It determines that there are no users, and has guaranteed that there will be no future users. So it knows that it can safely do
kmem_cache_destroy().3. In absence of
rcu_barrier(),kmem_cache_destroy()would
immediately tear down the slab data structures.
Of course. This has been discussed before.
You need to ensure that no objects are in use before destroying a slab. In case of DESTROY_BY_RCU you must ensure that there are no potential readers. So use a suitable rcu barrier or something else like a synchronize_rcu...
Quoted 5 lines
Quoted 2 lines
But going through the RCU period is pointless since no user of the cache remains.
Which is irrelevant. The outstanding RCU callback was posted by the slab cache itself, -not- by the user of the slab cache.
There will be no rcu callbacks generated at kmem_cache_destroy with the patch I posted.
Quoted 6 lines
Quoted 2 lines
The dismantling does not need RCU since there are no operations on the objects in progress. So simply switch
DESTROY_BY_RCUoff for close.Unless I am missing something, this patch re-introduces the bug that the
rcu_barrier()was added to prevent. So, in absence of a better explanation of what I am missing:
The "fix" was ill advised. Slab users must ensure that no objects are in use before destroying a slab. Only the slab users know how the objects are being used. The slab allocator itself cannot know how to ensure that there are no pending references. Putting a rcu_barrier in there creates an inconsistency in the operation of kmem_cache_destroy() and an expectation of functionality that the function cannot provide.
Re: [PATCH] slub: fix slab_pad_check()
Quoted 11 lines · Christoph Lameter
Quoted 8 lines · Paul E. McKenney
2. CPU 0 discovers that the slab cache can now be destroyed.
It determines that there are no users, and has guaranteed that there will be no future users. So it knows that it can safely do
kmem_cache_destroy().3. In absence of
rcu_barrier(),kmem_cache_destroy()would
immediately tear down the slab data structures.
Quoted 6 lines
Of course. This has been discussed before.
You need to ensure that no objects are in use before destroying a slab. In case of
DESTROY_BY_RCUyou must ensure that there are no potential readers. So use a suitable rcu barrier or something else like asynchronize_rcu...
If by "you must ensure" you mean "kmem_cache_destroy must ensure", then we are in complete agreement. Otherwise, not a chance.
Quoted 8 lines
Quoted 5 lines
Quoted 2 lines
But going through the RCU period is pointless since no user of the cache remains.
Which is irrelevant. The outstanding RCU callback was posted by the slab cache itself, -not- by the user of the slab cache.
There will be no rcu callbacks generated at
kmem_cache_destroywith the patch I posted.
That is true. However, there well might be RCU callbacks generated by kmem_cache_free() that have not yet been invoked. Since kmem_cache_free() generated them, it is ridiculous to insist that the user account for them. That responsibility must instead fall on kmem_cache_destroy().
Quoted 7 lines
Quoted 6 lines
Quoted 2 lines
The dismantling does not need RCU since there are no operations on the objects in progress. So simply switch
DESTROY_BY_RCUoff for close.Unless I am missing something, this patch re-introduces the bug that the
rcu_barrier()was added to prevent. So, in absence of a better explanation of what I am missing:
Quoted 6 lines
The "fix" was ill advised. Slab users must ensure that no objects are in use before destroying a slab. Only the slab users know how the objects are being used. The slab allocator itself cannot know how to ensure that there are no pending references. Putting a
rcu_barrierin there creates an inconsistency in the operation ofkmem_cache_destroy()and an expectation of functionality that the function cannot provide.
If by "must ensure that no objects are in use", you mean "must have no further references to them", then we are in agreement. And in my scenario above, it is not the -user- who later references the memory, but rather the slab code itself.
Put the rcu_barrier() in kmem_cache_free(). Please.
Thanx, Paul
Re: [PATCH] slub: fix slab_pad_check()
Quoted 7 lines · Paul E. McKenney
Quoted 4 lines
You need to ensure that no objects are in use before destroying a slab. In case of
DESTROY_BY_RCUyou must ensure that there are no potential readers. So use a suitable rcu barrier or something else like asynchronize_rcu...If by "you must ensure" you mean "
kmem_cache_destroymust ensure", then we are in complete agreement. Otherwise, not a chance.
Well then we are going down to a crappy interface and mixing rcu with slab semantics. More bugs to follow in the future.
Quoted 4 lines
If by "must ensure that no objects are in use", you mean "must have no further references to them", then we are in agreement. And in my scenario above, it is not the -user- who later references the memory, but rather the slab code itself.
The slab code itself is not referencing the later memory with my patch. It can only be the user.
Quoted 1 line
Put the
rcu_barrier()inkmem_cache_free(). Please.
Guess we are doing this ... Sigh. Are you going to add support other rcu versions to slab as well as time permits and as the need arises? Should we add you as a maintainer? ;-)
Re: [PATCH] slub: fix slab_pad_check()
In reply to Christoph LameterQuoted 32 lines · Christoph Lameter
Quoted 8 lines · Paul E. McKenney
2. CPU 0 discovers that the slab cache can now be destroyed.
It determines that there are no users, and has guaranteed that there will be no future users. So it knows that it can safely do
kmem_cache_destroy().3. In absence of
rcu_barrier(),kmem_cache_destroy()would
immediately tear down the slab data structures.Of course. This has been discussed before.
You need to ensure that no objects are in use before destroying a slab. In case of
DESTROY_BY_RCUyou must ensure that there are no potential readers. So use a suitable rcu barrier or something else like asynchronize_rcu...Quoted 4 lines
Quoted 2 lines
But going through the RCU period is pointless since no user of the cache remains.
Which is irrelevant. The outstanding RCU callback was posted by the slab cache itself, -not- by the user of the slab cache.
There will be no rcu callbacks generated at
kmem_cache_destroywith the patch I posted.Quoted 5 lines
Quoted 2 lines
The dismantling does not need RCU since there are no operations on the objects in progress. So simply switch
DESTROY_BY_RCUoff for close.Unless I am missing something, this patch re-introduces the bug that the
rcu_barrier()was added to prevent. So, in absence of a better explanation of what I am missing:
Quoted 7 lines
The "fix" was ill advised. Slab users must ensure that no objects are in use before destroying a slab. Only the slab users know how the objects are being used. The slab allocator itself cannot know how to ensure that there are no pending references. Putting a
rcu_barrierin there creates an inconsistency in the operation ofkmem_cache_destroy()and an expectation of functionality that the function cannot provide.
Problem is not _objects_ Christoph, but _slabs_, and your patch is not working.
Its true that when User calls kmem_cache_destroy(), all _objects_ were previously freed. This is mandatory, with or withou SLAB_DESTROY_BY_RCU thing
Problem is that slub has some internal state, including some to-be-freed _slabs_, that User have no control at all on it.
User cannot "know" slabs are freed, inuse, or whatever state in cache or call_rcu queues.
Face it, SLAB_DESTROY_BY_RCU is internal affair (to slub/slab/... allocators)
We absolutely need a rcu_barrier() somewhere, believe it or not. You can argue that it should be done *before*, but it gives no speedup, only potential bugs.
Only case User should do its rcu_barrier() itself is if it knows some call_rcu() are pending and are delaying _objects_ freeing (typical !SLAB_DESTROY_RCU usage in RCU algos).
I dont even understand why you care so much about kmem_cache_destroy(SLAB_DESTROY_BY_RCU), given that almost nobody use it. We took almost one month to find out what the bug was in first place...
--
To unsubscribe from this list: send the line "unsubscribe netfilter-devel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH] slub: fix slab_pad_check()
Quoted 18 lines · Eric Dumazet
Problem is not _objects_ Christoph, but _slabs_, and your patch is not working.
Its true that when User calls
kmem_cache_destroy(), all _objects_ were previously freed. This is mandatory, with or withouSLAB_DESTROY_BY_RCUthingProblem is that slub has some internal state, including some to-be-freed _slabs_, that User have no control at all on it.
User cannot "know" slabs are freed, inuse, or whatever state in cache or
call_rcuqueues.Face it,
SLAB_DESTROY_BY_RCUis internal affair (to slub/slab/... allocators)We absolutely need a
rcu_barrier()somewhere, believe it or not. You can argue that it should be done *before*, but it gives no speedup, only potential bugs.
Quoted 6 lines
Only case User should do its
rcu_barrier()itself is if it knows somecall_rcu()are pending and are delaying _objects_ freeing (typical !SLAB_DESTROY_RCU usage in RCU algos).I dont even understand why you care so much about
kmem_cache_destroy(SLAB_DESTROY_BY_RCU), given that almost nobody use it. We took almost one month to find out what the bug was in first place...
So maybe the safest thing would be to include the rcu_barrier() to insure all objects where freed
And another one for SLAB_DESTROY_BY_RCU to make sure slabs where freed
void kmem_cache_destroy(struct kmem_cache *s)
{
/*
* Make sure no objects are waiting in call_rcu queues to be freed
*/
rcu_barrier();
down_write(&slub_lock);
s->refcount--;
if (!s->refcount) {
list_del(&s->list);
up_write(&slub_lock);
if (kmem_cache_close(s)) {
printk(KERN_ERR "SLUB %s: %s called for cache that "
"still has objects.\n", s->name, __func__);
dump_stack();
}
/*
* Make sure no slabs are waiting in call_rcu queues to be freed
*/
if (s->flags & SLAB_DESTROY_BY_RCU)
rcu_barrier();
sysfs_slab_remove(s);
} else
up_write(&slub_lock);
}Re: [PATCH] slub: fix slab_pad_check()
Quoted 1 line · Eric Dumazet
And another one for
SLAB_DESTROY_BY_RCUto make sure slabs where freed
Now its two rcu_barriers(). What I feared comes true.
Re: [PATCH] slub: fix slab_pad_check()
In reply to Eric DumazetQuoted 22 lines · Eric Dumazet
Quoted 21 lines · Eric Dumazet
Problem is not _objects_ Christoph, but _slabs_, and your patch is not working.
Its true that when User calls
kmem_cache_destroy(), all _objects_ were previously freed. This is mandatory, with or withouSLAB_DESTROY_BY_RCUthingProblem is that slub has some internal state, including some to-be-freed _slabs_, that User have no control at all on it.
User cannot "know" slabs are freed, inuse, or whatever state in cache or
call_rcuqueues.Face it,
SLAB_DESTROY_BY_RCUis internal affair (to slub/slab/... allocators)We absolutely need a
rcu_barrier()somewhere, believe it or not. You can argue that it should be done *before*, but it gives no speedup, only potential bugs.Only case User should do its
rcu_barrier()itself is if it knows somecall_rcu()are pending and are delaying _objects_ freeing (typical !SLAB_DESTROY_RCU usage in RCU algos).
Quoted 7 lines
Quoted 3 lines
I dont even understand why you care so much about
kmem_cache_destroy(SLAB_DESTROY_BY_RCU), given that almost nobody use it. We took almost one month to find out what the bug was in first place...So maybe the safest thing would be to include the
rcu_barrier()to insure all objects where freed
I argue that the above is the user's responsibility. That said, I don't see why the user would pass a SLAB_DESTROY_BY_RCU object to call_rcu(). So I would want to see an example of this before inflicting a pair of rcu_barrier() calls on kmem_cache_destroy().
Quoted 1 line
And another one for
SLAB_DESTROY_BY_RCUto make sure slabs where freed
This last is I believe kmem_cache's responsibility.
Thanx, Paul
Quoted 18 lines
void
kmem_cache_destroy(struct kmem_cache *s){ /* * Make sure no objects are waiting in call_rcu queues to be freed */ rcu_barrier(); down_write(&slub_lock); s->refcount--; if (!s->refcount) { list_del(&s->list); up_write(&slub_lock); if (kmem_cache_close(s)) { printk(KERN_ERR "SLUB %s: %s called for cache that " "still has objects.\n", s->name, __func__); dump_stack(); } /*
Quoted 8 lines
* Make sure no slabs are waiting in call_rcu queues to be freed
*/
if (s->flags & SLAB_DESTROY_BY_RCU)
rcu_barrier();
sysfs_slab_remove(s);
} else
up_write(&slub_lock);
}--
To unsubscribe from this list: send the line "unsubscribe netfilter-devel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH] slub: fix slab_pad_check()
In reply to Eric DumazetQuoted 1 line · Eric Dumazet
Problem is not _objects_ Christoph, but _slabs_, and your patch is not working.
Why?
Quoted 3 lines
Its true that when User calls
kmem_cache_destroy(), all _objects_ were previously freed. This is mandatory, with or withouSLAB_DESTROY_BY_RCUthing
Right.
Quoted 2 lines
Problem is that slub has some internal state, including some to-be-freed _slabs_, that User have no control at all on it.
Those are going to be freed without calls to rcu with my patch. The only reason for earlier rcu frees are user calls to kfree.
Quoted 1 line
Face it,
SLAB_DESTROY_BY_RCUis internal affair (to slub/slab/... allocators)
Nope the user must follow RCU guidelines when using objects.
Quoted 3 lines
We absolutely need a
rcu_barrier()somewhere, believe it or not. You can argue that it should be done *before*, but it gives no speedup, only potential bugs.
I never said that you do not need an rcu_barrier() for this particular situation? Why suggest such a thing?
The insertion of rcu stuff in the slab code will lead to future bugs since now the slab logic is tied to the semantics of a particular rcu implementatin.
Quoted 3 lines
Only case User should do its
rcu_barrier()itself is if it knows somecall_rcu()are pending and are delaying _objects_ freeing (typical !SLAB_DESTROY_RCU usage in RCU algos).
Ok then the user already has to deal with the barriers. The API is inconsistent if you put this into kmem_cache_destroy.
Quoted 4 lines
I dont even understand why you care so much about
kmem_cache_destroy(SLAB_DESTROY_BY_RCU), given that almost nobody use it. We took almost one month to find out what the bug was in first place...
This is already the second bug on this issue. Given the complexity of rcu it is to be experted that inserting more RCU semantics into the slab allocators is likely to cause future chains of new features and bugs in slab allocators.
Re: [PATCH] slub: fix slab_pad_check()
In reply to Christoph LameterQuoted 45 lines · Christoph Lameter
Quoted 3 lines · Eric Dumazet
Point is we cannot deal with RCU quietness before disposing the slab cache, (if
SLAB_DESTROY_BY_RCUwas set on the cache) since this disposing *will* makecall_rcu()calls when a full slab is freed/purged.There is no need to do
call_rcucalls for frees at that point since objects are no longer in use. We could simply disableSLAB_DESTROY_BY_RCUfor the final clearing of caches.Quoted 2 lines
And when RCU grace period is elapsed, the callback *will* need access to the cache we want to dismantle. Better to not have kfreed()/poisoned it...
But going through the RCU period is pointless since no user of the cache remains.
Quoted 9 lines
I believe you mix two RCU uses here.
1) The one we all know, is use normal caches (!SLAB_DESTROY_BY_RCU) (or
kmalloc()), and use call_rcu(...kfree_something)In this case, you are 100% right that the subsystem itself has to call
rcu_barrier()(or respect whatever self-synchro) itself, before callingkmem_cache_destroy()Quoted 5 lines
2) The
SLAB_DESTROY_BY_RCUone.Part of cache dismantle needs to call
rcu_barrier()itself. Caller doesnt have to usercu_barrier(). It would be a waste of time, askmem_cache_destroy()will refill rcu wait queues with its own stuff.The dismantling does not need RCU since there are no operations on the objects in progress. So simply switch
DESTROY_BY_RCUoff for close.--- mm/slub.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)Index:
linux-2.6/mm/slub.c
===================================================================mm/slub.c +0
-0@@ -2594,9 +2594,9 @@ static inline int kmem_cache_close(struc*/
mm/slub.c static inline int kmem_cache_close(struc · line 2602
Quoted 10 lines
mm/slub.c +2
-2void kmem_cache_destroy (struct kmem_cache *s) { -if (s->flags &SLAB_DESTROY_BY_RCU ) -rcu_barrier ();down_write (&slub_lock); +/* Stop deferring frees so that we can immediately free structures */ + s->flags &= ~SLAB_DESTROY_BY_RCU ; s->refcount--;if (!s->refcount) {list_del (&s->list);
It seems very smart, but needs review of all callers to make sure no slabs are waiting for final freeing in call_rcu queue on some cpu.
I suspect most of them will then have to use rcu_barrier() before calling kmem_cache_destroy(), so why not factorizing code in one place ?
net/dccp/ipv6.c:1145: .slab_flags = SLAB_DESTROY_BY_RCU, net/dccp/ipv4.c:941: .slab_flags = SLAB_DESTROY_BY_RCU, net/ipv4/udp.c:1593: .slab_flags = SLAB_DESTROY_BY_RCU, net/ipv4/udplite.c:54: .slab_flags = SLAB_DESTROY_BY_RCU, net/ipv4/tcp_ipv4.c:2446: .slab_flags = SLAB_DESTROY_BY_RCU, net/ipv4/udp.c.orig:1587: .slab_flags = SLAB_DESTROY_BY_RCU, net/ipv6/udp.c:1274: .slab_flags = SLAB_DESTROY_BY_RCU, net/ipv6/udplite.c:52: .slab_flags = SLAB_DESTROY_BY_RCU,
net/ipv6/tcp_ipv6.c:2085: .slab_flags = SLAB_DESTROY_BY_RCU,net/netfilter/nf_conntrack_core.c:1269: 0, SLAB_DESTROY_BY_RCU, NULL);
Re: [PATCH] slub: fix slab_pad_check()
Quoted 60 lines · Eric Dumazet
Quoted 45 lines · Christoph Lameter
Quoted 3 lines · Eric Dumazet
Point is we cannot deal with RCU quietness before disposing the slab cache, (if
SLAB_DESTROY_BY_RCUwas set on the cache) since this disposing *will* makecall_rcu()calls when a full slab is freed/purged.There is no need to do
call_rcucalls for frees at that point since objects are no longer in use. We could simply disableSLAB_DESTROY_BY_RCUfor the final clearing of caches.Quoted 2 lines
And when RCU grace period is elapsed, the callback *will* need access to the cache we want to dismantle. Better to not have kfreed()/poisoned it...
But going through the RCU period is pointless since no user of the cache remains.
Quoted 9 lines
I believe you mix two RCU uses here.
1) The one we all know, is use normal caches (!SLAB_DESTROY_BY_RCU) (or
kmalloc()), and use call_rcu(...kfree_something)In this case, you are 100% right that the subsystem itself has to call
rcu_barrier()(or respect whatever self-synchro) itself, before callingkmem_cache_destroy()Quoted 5 lines
2) The
SLAB_DESTROY_BY_RCUone.Part of cache dismantle needs to call
rcu_barrier()itself. Caller doesnt have to usercu_barrier(). It would be a waste of time, askmem_cache_destroy()will refill rcu wait queues with its own stuff.The dismantling does not need RCU since there are no operations on the objects in progress. So simply switch
DESTROY_BY_RCUoff for close.---
mm/slub.c | 4 ++--1 file changed, 2 insertions(+), 2 deletions(-)Index:
linux-2.6/mm/slub.c
===================================================================mm/slub.c 2009-09-03 10:18:32.000000000 -0500 renamed from mm/slub.c 2009-09-03 10:14:51.000000000 -0500 +0
-0@@ -2594,9 +2594,9 @@ static inline int kmem_cache_close(struc */mm/slub.c 2009-09-03 10:18:32.000000000 -0500 static inline int kmem_cache_close(struc · line 2602
Quoted 10 lines
mm/slub.c 2009-09-03 10:18:32.000000000 -0500 renamed from mm/slub.c 2009-09-03 10:14:51.000000000 -0500 +2
-2void kmem_cache_destroy(struct kmem_cache *s) { - if (s->flags & SLAB_DESTROY_BY_RCU) - rcu_barrier(); down_write(&slub_lock); + /* Stop deferring frees so that we can immediately free structures */ + s->flags &= ~SLAB_DESTROY_BY_RCU; s->refcount--; if (!s->refcount) { list_del(&s->list);It seems very smart, but needs review of all callers to make sure no slabs are waiting for final freeing in
call_rcuqueue on some cpu.
Quoted 2 lines
I suspect most of them will then have to use
rcu_barrier()before callingkmem_cache_destroy(), so why not factorizing code in one place ?
[snip]
Can someone please explain what's the upside in Christoph's approach? Performance? Correctness? Something else entirely? We're looking at a tested bug fix here and I don't understand why I shouldn't just go ahead and merge it. Hmm?
Pekka
Re: [PATCH] slub: fix slab_pad_check()
In reply to Eric DumazetQuoted 2 lines · Eric Dumazet
It seems very smart, but needs review of all callers to make sure no slabs are waiting for final freeing in
call_rcuqueue on some cpu.
Yes. Again this is the first time we encounter a situation where a DESTROY_BY_RCU slab has to be destroyed. So the review is quite short.
Quoted 2 lines
I suspect most of them will then have to use
rcu_barrier()before callingkmem_cache_destroy(), so why not factorizing code in one place ?
There are different forms of RCU which require different forms of barriers. Its best to leave that up to the user. Again the user must make sure that no objects are in use before a slab is destroyed. For SLAB_DESTROY_BY_RCU this means that there are no potential outstanding reads on the structure. You may need an rcu_barrier() to accomplish that.
Slight variations in the use of RCU could require different method. Better reduce the entanglement of slabs to RCU to a mininum possible.
Re: [PATCH] slub: fix slab_pad_check()
Quoted 11 lines · Christoph Lameter
Quoted 2 lines · Eric Dumazet
It seems very smart, but needs review of all callers to make sure no slabs are waiting for final freeing in
call_rcuqueue on some cpu.Yes. Again this is the first time we encounter a situation where a
DESTROY_BY_RCUslab has to be destroyed. So the review is quite short.Quoted 2 lines
I suspect most of them will then have to use
rcu_barrier()before callingkmem_cache_destroy(), so why not factorizing code in one place ?
Quoted 8 lines
There are different forms of RCU which require different forms of barriers. Its best to leave that up to the user. Again the user must make sure that no objects are in use before a slab is destroyed. For
SLAB_DESTROY_BY_RCUthis means that there are no potential outstanding reads on the structure. You may need anrcu_barrier()to accomplish that.Slight variations in the use of RCU could require different method. Better reduce the entanglement of slabs to RCU to a mininum possible.
If it were the user of the slab who was invoking some variant of call_rcu(), then I would agree with you.
However, call_rcu() is instead being invoked by the slab itself in the case of SLAB_DESTROY_BY_RCU, so that there is no variation in usage. Requiring that the user call rcu_barrier() is asking for subtle bugs. Therefore, the best approach is to have kmem_cache_destroy() handle the RCU cleanup, given that this cleanup is for actions taken by kmem_cache_free(), not by the user.
Thanx, Paul
Re: [PATCH] slub: fix slab_pad_check()
Quoted 2 lines · Paul E. McKenney
If it were the user of the slab who was invoking some variant of
call_rcu(), then I would agree with you.
The user already has to deal with it as explained by Eric.
Quoted 6 lines
However,
call_rcu()is instead being invoked by the slab itself in the case ofSLAB_DESTROY_BY_RCU, so that there is no variation in usage. Requiring that the user callrcu_barrier()is asking for subtle bugs. Therefore, the best approach is to havekmem_cache_destroy()handle the RCU cleanup, given that this cleanup is for actions taken bykmem_cache_free(), not by the user.
The user already has to properly handle barriers and rcu logic in order to use objects handled with RCU properly. Moreover the user even has to check that the object is not suddenly checked under it. Its already complex.
Re: [PATCH] slub: fix slab_pad_check()
Quoted 6 lines · Christoph Lameter
Quoted 2 lines · Paul E. McKenney
If it were the user of the slab who was invoking some variant of
call_rcu(), then I would agree with you.The user already has to deal with it as explained by Eric.
I didn't read his email that way. Perhaps I misinterpreted it.
Quoted 10 lines
Quoted 6 lines
However,
call_rcu()is instead being invoked by the slab itself in the case ofSLAB_DESTROY_BY_RCU, so that there is no variation in usage. Requiring that the user callrcu_barrier()is asking for subtle bugs. Therefore, the best approach is to havekmem_cache_destroy()handle the RCU cleanup, given that this cleanup is for actions taken bykmem_cache_free(), not by the user.The user already has to properly handle barriers and rcu logic in order to use objects handled with RCU properly. Moreover the user even has to check that the object is not suddenly checked under it. Its already complex.
mm/slab.c has had RCU calls since 2.6.9, so this is not new.
Quoted 3 lines
Guess we are doing this ... Sigh. Are you going to add support other rcu versions to slab as well as time permits and as the need arises? Should we add you as a maintainer? ;-)
I don't see any point in adding anything resembling SLAB_DESTROY_BY_RCU_BH, SLAB_DESTROY_BY_RCU_SCHED, or SLAB_DESTROY_BY_SRCU unless and until someone needs it. And I most especially don't see the point of adding (say) SLAB_DESTROY_BY_RCU_BH_SCHED until someone convinces me of the need for it. I would prefer to put the energy into further streamlining the underlying RCU implementation, maybe someday collapsing RCU-BH back into RCU. ;-)
We have gotten along fine with only SLAB_DESTROY_BY_RCU for almost five years, so I think we are plenty fine with what we have. So, as you say, "as the need arises".
I don't see any more need to add me as maintainer of slab and friends than of btrfs, netfilter, selinux, decnet, afs, wireless, or any of a number of other subsystems that use RCU.
Thanx, Paul
Re: [PATCH] slub: fix slab_pad_check()
Quoted 3 lines · Paul E. McKenney
We have gotten along fine with only
SLAB_DESTROY_BY_RCUfor almost five years, so I think we are plenty fine with what we have. So, as you say, "as the need arises".
These were the glory years where SLAB_DESTROY_BY_RCU was only used for anonymous vmas. Now Eric has picked it up for the net subsystem. You may see the RCU use proliferate.
The kmem_cache_destroy rcu barriers did not matter until SLAB_DESTROY_BY_RCU spread.
Re: [PATCH] slub: fix slab_pad_check()
Quoted 6 lines · Christoph Lameter
Quoted 3 lines · Paul E. McKenney
We have gotten along fine with only
SLAB_DESTROY_BY_RCUfor almost five years, so I think we are plenty fine with what we have. So, as you say, "as the need arises".
Quoted 6 lines
These were the glory years where
SLAB_DESTROY_BY_RCUwas only used for anonymous vmas. Now Eric has picked it up for the net subsystem. You may see the RCU use proliferate.The
kmem_cache_destroyrcu barriers did not matter untilSLAB_DESTROY_BY_RCUspread.
Certainly it is true that increased use of RCU has resulted in new requirements, which have in turn led to any number of changes over the years.
Are you saying that people have already asked you for additional variants of SLAB_DESTROY_BY_RCU? If so, please don't keep them a secret! Otherwise, experience indicates that it is best to wait for the new uses, because they usually aren't quite what one might expect.
Thanx, Paul
Re: [PATCH] slub: fix slab_pad_check()
Quoted 4 lines · Paul E. McKenney
Are you saying that people have already asked you for additional variants of
SLAB_DESTROY_BY_RCU? If so, please don't keep them a secret! Otherwise, experience indicates that it is best to wait for the new uses, because they usually aren't quite what one might expect.
No direct request but I have seen the network developers discover these features and their caching benefits over the last year. It is likely that they will try to push it into more components of the net subsystem.
Re: [PATCH] slub: fix slab_pad_check()
Quoted 10 lines · Christoph Lameter
Quoted 4 lines · Paul E. McKenney
Are you saying that people have already asked you for additional variants of
SLAB_DESTROY_BY_RCU? If so, please don't keep them a secret! Otherwise, experience indicates that it is best to wait for the new uses, because they usually aren't quite what one might expect.No direct request but I have seen the network developers discover these features and their caching benefits over the last year. It is likely that they will try to push it into more components of the net subsystem.
So if they push it far enough, they might well decide that they need a SLAB_DESTROY_BY_RCU_BH, for example. Looks like seven bits left, so unless I am missing something, should not be a huge problem should this need arise.
Thanx, Paul
Re: [PATCH] slub: fix slab_pad_check()
Quoted 8 lines · Paul E. McKenney
Quoted 3 lines
No direct request but I have seen the network developers discover these features and their caching benefits over the last year. It is likely that they will try to push it into more components of the net subsystem.
So if they push it far enough, they might well decide that they need a
SLAB_DESTROY_BY_RCU_BH, for example. Looks like seven bits left, so unless I am missing something, should not be a huge problem should this need arise.
I'd rather have the call_rcu in the slabs replaced by a function that can be set by the user. Then we can remove all rcu barriers from the code and the slabs could be used with any type of rcu functionality.
Re: [PATCH] slub: fix slab_pad_check()
Quoted 6 lines · Christoph Lameter
Quoted 4 lines · Paul E. McKenney
Quoted 3 lines
No direct request but I have seen the network developers discover these features and their caching benefits over the last year. It is likely that they will try to push it into more components of the net subsystem.
Quoted 8 lines
Quoted 4 lines
So if they push it far enough, they might well decide that they need a
SLAB_DESTROY_BY_RCU_BH, for example. Looks like seven bits left, so unless I am missing something, should not be a huge problem should this need arise.I'd rather have the
call_rcuin the slabs replaced by a function that can be set by the user. Then we can remove all rcu barriers from the code and the slabs could be used with any type of rcu functionality.
If the embedded guys are OK with an additional pointer in the slab data structure, I have no objection to this approach. I am assuming that we would use the usual ops-style structure full of pointers to functions in order to avoid a pair of extra pointers.
Thanx, Paul
Re: [PATCH] slub: fix slab_pad_check()
Quoted 4 lines · Paul E. McKenney
If the embedded guys are OK with an additional pointer in the slab data structure, I have no objection to this approach. I am assuming that we would use the usual ops-style structure full of pointers to functions in order to avoid a pair of extra pointers.
This would also allow us to get rid of the ctor pointer in kmem_cache_create(). We can put it into the same structure.
Re: [PATCH] slub: fix slab_pad_check()
Quoted 9 lines · Christoph Lameter
Quoted 4 lines · Paul E. McKenney
If the embedded guys are OK with an additional pointer in the slab data structure, I have no objection to this approach. I am assuming that we would use the usual ops-style structure full of pointers to functions in order to avoid a pair of extra pointers.
This would also allow us to get rid of the ctor pointer in
kmem_cache_create(). We can put it into the same structure.
Sounds good -- that would result in no increase in size. Could even add a dtor if people want it. ;-) (Sorry, couldn't resist...)
Thanx, Paul
Pekka Enberg
AppliedRe: [PATCH] slub: fix slab_pad_check()
In reply to Eric DumazetQuoted 10 lines · Eric Dumazet
Sure, here is the poison thing
[PATCH] slub: fix
slab_pad_check()When
SLAB_POISONis used andslab_pad_check()finds an overwrite of the slab padding, we callrestore_bytes()on the whole slab, not only on the padding.Reported-by Zdenek Kabelac <[email protected]>Signed-off-by Eric Dumazet <[email protected]>
Applied, thanks!
Re: [PATCH] slub: fix slab_pad_check() and SLAB_DESTROY_BY_RCU
In reply to Christoph LameterQuoted 7 lines · Christoph Lameter
Quoted 2 lines · Eric Dumazet
on a
SLAB_DESTROY_BY_RCUcache, there is no need to try to optimize thisrcu_barrier()call, unless we want superfast reboot/halt sequences...I stilll think that the action to quiesce rcu is something that the caller of
kmem_cache_destroymust take care of.
Why?
Thanx, Paul
Quoted 3 lines
Could you split this into two patches: One that addresses the poison and another that deals with rcu?
Paul E. McKenney
Acked-byRe: [PATCH] slub: fix slab_pad_check() and SLAB_DESTROY_BY_RCU
In reply to Pekka EnbergQuoted 67 lines · Pekka Enberg
Quoted 34 lines · Eric Dumazet
Quoted 5 lines · Zdenek Kabelac
Well I'm not noticing any ill behavior - also note -
rcu_barrier()is there before the cache is destroyed.
But as I said - it's just my shot into the dark - which seems to work for me...Reading again your traces, I do believe there are two bugs in slub
Maybe not explaining your problem, but worth to fix !
Thank you
[PATCH] slub: fix
slab_pad_check()andSLAB_DESTROY_BY_RCUWhen
SLAB_POISONis used andslab_pad_check()finds an overwrite of the slab padding, we callrestore_bytes()on the whole slab, not only on the padding.
kmem_cache_destroy()should callrcu_barrier()*after*kmem_cache_close()and *before*sysfs_slab_remove()or riskrcu_free_slab()being called afterkmem_cacheis deleted (kfreed).rmmod
nf_conntrackcan crash the machine because it has tokmem_cache_destroy()aSLAB_DESTROY_BY_RCUenabled cache.Reported-by Zdenek Kabelac <[email protected]>Signed-off-by Eric Dumazet <[email protected]>---
mm/slub.c +0
-0mm/slub.c static int slab_pad_check(struct kmem_cache *s, struct page *page) · line 649
Quoted 5 lines
mm/slub.c +1
-1@@ -646,7 +646,7 @@ static int slab_pad_check(struct kmem_cache *s, struct page *page) slab_err(s, page, "Padding overwritten. 0x%p-0x%p", fault, end - 1); print_section("Padding", end - remainder, remainder); - restore_bytes(s, "slab padding", POISON_INUSE, start, end); + restore_bytes(s, "slab padding", POISON_INUSE, end - remainder, end);OK, makes sense.
Quoted 13 lines
mm/slub.c +0
-2return 0; }@@ -2594,8 +2594,6 @@ static inline int kmem_cache_close(struct kmem_cache *s)*/ void kmem_cache_destroy(struct kmem_cache *s) { - if (s->flags & SLAB_DESTROY_BY_RCU) - rcu_barrier(); down_write(&slub_lock); s->refcount--; if (!s->refcount) {mm/slub.c void kmem_cache_destroy(struct kmem_cache *s) · line 2611
Quoted 8 lines
mm/slub.c +2
-0@@ -2606,6 +2604,8 @@ void kmem_cache_destroy(struct kmem_cache *s) "still has objects.\n", s->name, __func__); dump_stack(); } + if (s->flags & SLAB_DESTROY_BY_RCU) + rcu_barrier(); sysfs_slab_remove(s); } else up_write(&slub_lock);The
rcu_barrier()call was added by this commit:
Quoted 3 lines
I guess we should CC Paul as well.
I agree that moving the rcu_barrier() as you have done is the right thing to do -- no point in doing the rcu_barrier() unless you actually are destroying the kmem_cache!
--
To unsubscribe from this list: send the line "unsubscribe netfilter-devel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH] slub: fix slab_pad_check() and SLAB_DESTROY_BY_RCU
In reply to Eric Dumazet2009/9/3 Eric Dumazet <[email protected]>:
Quoted 7 lines
Quoted 5 lines · Zdenek Kabelac
Well I'm not noticing any ill behavior - also note -
rcu_barrier()is there before the cache is destroyed.
But as I said - it's just my shot into the dark - which seems to work for me...
Quoted 8 lines
Reading again your traces, I do believe there are two bugs in slub
Maybe not explaining your problem, but worth to fix !
Thank you
[PATCH] slub: fix
slab_pad_check()andSLAB_DESTROY_BY_RCU
Ok - I can confirm that this patch fixes my reboot problem.
Thanks
Zdenek
Re: [PATCH] slub: fix slab_pad_check() and SLAB_DESTROY_BY_RCU
Quoted 16 lines · Zdenek Kabelac
2009/9/3 Eric Dumazet <[email protected]>:
Quoted 5 lines
Quoted 4 lines · Zdenek Kabelac
Well I'm not noticing any ill behavior - also note -
rcu_barrier()is there before the cache is destroyed.
But as I said - it's just my shot into the dark - which seems to work for me...Quoted 8 lines
Reading again your traces, I do believe there are two bugs in slub
Maybe not explaining your problem, but worth to fix !
Thank you
[PATCH] slub: fix
slab_pad_check()andSLAB_DESTROY_BY_RCU
Quoted 5 lines
Ok - I can confirm that this patch fixes my reboot problem.
Thanks
Zdenek
Good news !
Hmm... but you had a problem with a 2.6.29.something kernel if I remember well ?
At that time, conntrack did not use SLAB_DESTROY_BY_RCU yet.
--
To unsubscribe from this list: send the line "unsubscribe netfilter-devel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH] slub: fix slab_pad_check() and SLAB_DESTROY_BY_RCU
2009/9/3 Eric Dumazet <[email protected]>:
Quoted 21 lines
Quoted 20 lines · Zdenek Kabelac
2009/9/3 Eric Dumazet <[email protected]>:
Quoted 5 lines
Quoted 4 lines · Zdenek Kabelac
Well I'm not noticing any ill behavior - also note -
rcu_barrier()is there before the cache is destroyed.
But as I said - it's just my shot into the dark - which seems to work for me...Quoted 8 lines
Reading again your traces, I do believe there are two bugs in slub
Maybe not explaining your problem, but worth to fix !
Thank you
[PATCH] slub: fix
slab_pad_check()andSLAB_DESTROY_BY_RCUOk - I can confirm that this patch fixes my reboot problem.
Thanks
Quoted 7 lines
Quoted 1 line
Zdenek
Good news !
Hmm... but you had a problem with a 2.6.29.something kernel if I remember well ?
At that time, conntrack did not use
SLAB_DESTROY_BY_RCUyet.
Yes - but it was also giving different error message - which even not loaded ftp conntrack module. Basically it has been fine until conntrack started to use rcu. From that moment various errors started to appear with slub and some kernel debugging options - slab was fine. With your recent patch it's the first time I do not see oops with nf after 2.6.29 kernel.
Zdenek
--
To unsubscribe from this list: send the line "unsubscribe netfilter-devel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Quoted 66 lines · Eric Dumazet
Quoted 65 lines · Zdenek Kabelac
2009/8/17 Patrick McHardy <[email protected]>:
Quoted 18 lines
Quoted 17 lines · Eric Dumazet
Quoted 16 lines · Zdenek Kabelac
[<ffffffffa02c502f>] nf_conntrack_ftp_fini+0x2f/0x70 [nf_conntrack_ftp] [<ffffffff8027bcc5>] sys_delete_module+0x1a5/0x270 [<ffffffff8020d329>] ? retint_swapgs+0xe/0x13 [<ffffffff80271bf2>] ? trace_hardirqs_on_caller+0x162/0x1b0 [<ffffffff80292121>] ? audit_syscall_entry+0x191/0x1c0 [<ffffffff80526dae>] ? trace_hardirqs_on_thunk+0x3a/0x3f [<ffffffff8020c84b>] system_call_fastpath+0x16/0x1b Code: c6 00 00 0f 82 66 ff ff ff 49 8b 9e d8 05 00 00 48 85 db 75 16e9 8e 00 00 00 0f 1f 44 00 00 48 85 c0 0f 84 80 00 00 00 48 89 c3 <0f> b6 4b 37 48 8b 03 48 8d 14 cd 00 00 00 00 0f 18 08 48 29 ca RIP [<
ffffffffa02b2c2c>]nf_conntrack_helper_unregister+0x16c/0x320[nf_conntrack]
RSP <ffff88013982fe68>
CR2: 0000000000000038---[ end trace bc3a0ede3d0084db ]---Quoted 6 lines
Quoted 3 lines
I am currently traveling and wont be able to help you before next week.
I added netdev, Patrick, and netfilter-devel in CC so that more eyes can take a look.
Thanks for the report, I'll have a look at this. Zdenek, please send me the nf_conntrack.ko file used in the above oops. Thanks.
Ok
I've found the solution for my problem.
http://thread.gmane.org/gmane.comp.security.firewalls.netfilter.devel/30483
I've made this small fix from this thread:
net/netfilter/nf_conntrack_core.c +2
-1@@ -1108,6 +1108,7 @@ static void nf_conntrack_cleanup_init_net(void) {nf_conntrack_helper_fini ();nf_conntrack_proto_fini (); +rcu_barrier ();kmem_cache_destroy (nf_conntrack_cachep); }@@ -1266,7 +1267,7 @@ static int nf_conntrack_init_init_net(void) nf_conntrack_cachep =kmem_cache_create ("nf_conntrack" ,sizeof (struct nf_conn ), -0 ,SLAB_DESTROY_BY_RCU ,NULL ); +0 ,0 ,NULL );if (!nf_conntrack_cachep) {printk (KERN_ERR "Unable to create nf_conn slab cache\n" ); ret = -ENOMEM ;As the thread
nf_conntrack: Usercu_barrier()and fixkmem_cache_createflags seems to be samewhat 'unfinished' and already a bit old and I've no idea whether it actually fixes problem completely or just hides it in my case - I'm leaving it to some RCU gurus to fix this issue.All I could say is - this this extra
rcu_barrier()and removal ofSLAB_DESTROYremoves my GPF on reboot.
Quoted 7 lines
Quoted 1 line
Zdenek
Ouch..
Dont think such a patch makes your kernel better, it'll crash too.
You cannot remove
SLAB_DESTROY_BY_RCUlike this, it's there for very good reasons.
And if I understand correctly, this is more evidence that kmem_cache_destroy() needs to do an rcu_barrier() in the SLAB_DESTROY_BY_RCU case.
Thanx, Paul
--
To unsubscribe from this list: send the line "unsubscribe netfilter-devel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html