: Nforce3-250 has no working support for front microphone
A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1346>
======================================================================
Reported By: alchemyx
Assigned To:
======================================================================
Project: ALSA - driver Issue ID: 1346 Category: PCI - intel8x0 Reproducibility: always Severity: minor Priority: normal Status: new Distribution: Gentoo Kernel Version: 2.6.12 ====================================================================== Date Submitted: 08-17-2005 11:04 CEST Last Modified: 08-19-2005 17:36 CEST
======================================================================
Summary: Nforce3-250 has no working support for front
microphone
Description:
I have nforce3-250 based motherboard. It uses i8x0 drivers for its sound chip, my output from lspci:
0000:00:06.0 Multimedia audio controller: nVidia Corporation nForce3 250Gb AC'97 Audio Controller (rev a1)
Subsystem: Giga-byte Technology: Unknown device a002
Flags: bus master, 66Mhz, fast devsel, latency 0, IRQ 21 I/O ports at e000
I/O ports at e400 [size=128]
Memory at fa002000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
That soundcard is supported quite well. Playing and also recording sounds just fine. Only problem is that I have front audio panel built in my case, where I can connect microphone and headphones. Headphones work fine, but I can't get recording from microphone connected to front panel.
Tweaking with mixer didn't help. Only solution was to use binary nvsound from nvidia drivers which is, to be honest, poor quality. Also it works fine under Windows.
So it seems that there is something missing or wrong in current i8x0 driver.
======================================================================
----------------------------------------------------------------------
vsu - 08-19-05 12:41
----------------------------------------------------------------------
If your motherboard has the Realtek ALC850 codec, you need to upgrade ALSA drivers to 1.0.9 (or later) release - see bug #1232 for details. The codec type is shown by alsamixer and in /proc/asound/card0/codec97#0/ac97#0-0.
If your motherboard has some other codec, please upload /proc/asound/card0/codec97#0/* files and /etc/asound.state file, like the reporter of #1232 did.
----------------------------------------------------------------------
alchemyx - 08-19-05 17:36
----------------------------------------------------------------------
It did solve that issue. Thank you! By the way I see some nice changes in drivers (like easy choosing channels number, great).
Issue History
Date Modified Username Field Change
======================================================================
08-17-05 11:04 alchemyx New Issue 08-17-05 11:04 alchemyx Distribution => Gentoo 08-17-05 11:04 alchemyx Kernel Version => 2.6.12 08-18-05 18:43 jirka Note Added: 0005851 08-18-05 23:01 alchemyx Note Added: 0005859 08-18-05 23:04 alchemyx Issue Monitored: alchemyx 08-19-05 12:41 vsu Note Added: 0005868 08-19-05 17:36 alchemyx Note Added: 0005870
======================================================================
-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf