Skip to contentSkip to conversation

stm32mp1: Fix warning display when 1.5A power supply is used

PATCH New Patrice Chotard 2 participants 3 messages Apr 30, 2020 – May 14, 2020 Arm STM32

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 stm32mp1: Fix warning display when 1.5A power supply is used

On DK1/2 board, when a 1.5A power supply is detected, a warning message is displayed. In this message, "1.5mA" is displayed instead of "1.5A".

---

 board/st/stm32mp1/stm32mp1.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
board/st/stm32mp1/stm32mp1.c +1 -1
index 45068b1cd9..a4e4d8e9fe 100644
@@ -435,7 +435,7 @@ static int board_check_usb_power(void)
 	if (max_uV > USB_WARNING_LOW_THRESHOLD_UV &&
 	    max_uV <= USB_START_LOW_THRESHOLD_UV &&
 	    min_uV <= USB_LOW_THRESHOLD_UV) {
-		pr_err("*       WARNING 1.5mA power supply detected        *\n");
+		pr_err("*       WARNING 1.5A power supply detected        *\n");
 		nb_blink = 3;
 	}
 
Signature · 1 line
2.17.1
#1 lore raw

PATCH 1/1 stm32mp1: Fix warning display when 1.5A power supply is used

Hi Patrice

Quoted 12 lines

From: Patrice CHOTARD <[email protected]>
Sent: jeudi 30 avril 2020 18:41

On DK1/2 board, when a 1.5A power supply is detected, a warning message is displayed. In this message, "1.5mA" is displayed instead of "1.5A".

---

 board/st/stm32mp1/stm32mp1.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Thanks

Patrick

#2 lore raw

PATCH 1/1 stm32mp1: Fix warning display when 1.5A power supply is used

In reply to Patrice Chotard

Hi Patrice

Quoted 12 lines

From: Patrice CHOTARD <[email protected]>
Sent: jeudi 30 avril 2020 18:41

On DK1/2 board, when a 1.5A power supply is detected, a warning message is displayed. In this message, "1.5mA" is displayed instead of "1.5A".

---

 board/st/stm32mp1/stm32mp1.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Applied to u-boot-stm/master, thanks!

Regards

Patrick