Skip to contentSkip to conversation

: gnome-alsamixer segfaults in snd_ctl_elem_value_set_iec958 when clicking 'Headphone Detection'

ALSA - lib 0001243 [email protected] 1 participant 1 message Jul 8, 2005

lore
Share & tools
lore
#0 lore raw

The following issue has been SUBMITTED.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1243>
======================================================================
Reported By: jdthood
Assigned To:
======================================================================

Project:                    ALSA - lib
Issue ID:                   1243
Category:                   0_general
Reproducibility:            always
Severity:                   major
Priority:                   normal
Status:                     new
======================================================================
Date Submitted:             07-08-2005 13:54 CEST
Last Modified:              07-08-2005 13:54 CEST

======================================================================
Summary: gnome-alsamixer segfaults in
snd_ctl_elem_value_set_iec958 when clicking 'Headphone Detection' Description:
The submitter of Debian bug
https://bugtrack.alsa-project.org/alsa-bug/view.php?id=317426 writes the following
-------------------------------------------------------------------------

I realize that I might have failed this bug against gnome-alsamixer instead,
but I believe that the library shouldn't go into an unterminated recursion
even if it is misused. And I don't even know for sure that it is misused, so...

On my PowerBook 5,6 gnome-alsamixer shows a control 'Headphone Detection' (this is kernel 2.6.12-rc5). When I try to check it, gnome-alsamixer segfaults. Further investigating this problem, it appears that within libasound2 there is some recursion:

Program received signal SIGSEGV, Segmentation fault.
[Switching to Thread 16384 (LWP 6744)]
0x0f03f1d8 in ioctl () from /lib/libc.so.6
(gdb)
(gdb) bt
https://bugtrack.alsa-project.org/alsa-bug/view.php?id=0 0x0f03f1d8 in ioctl () from /lib/libc.so.6
https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1 0x0f2332c4 in snd_ctl_elem_value_set_iec958 () from
/usr/lib/libasound.so.2
https://bugtrack.alsa-project.org/alsa-bug/view.php?id=2 0x0f2332c4 in snd_ctl_elem_value_set_iec958 () from
/usr/lib/libasound.so.2
[... I gave up trying to get something relevant after seeing the next line ...]
https://bugtrack.alsa-project.org/alsa-bug/view.php?id=11385 0x0f2332c4 in snd_ctl_elem_value_set_iec958 () from
/usr/lib/libasound.so.2

even putting a breakpoint on snd_ctl_elem_value_set_iec958 didn't help.

stracing it yields:
[...]
ioctl(16, USBDEVFS_HUB_PORTINFO, 0x7f031c10) = -1 EPERM (Operation not permitted)
ioctl(16, USBDEVFS_IOCTL, 0x7f031300) = 0
ioctl(16, USBDEVFS_HUB_PORTINFO, 0x7f031300) = -1 EPERM (Operation not permitted)
ioctl(16, USBDEVFS_IOCTL, 0x7f0309f0) = 0
ioctl(16, USBDEVFS_HUB_PORTINFO, 0x7f0309f0) = -1 EPERM (Operation not permitted)
--- SIGSEGV (Segmentation fault) @ 0 (0) ---
--- SIGSEGV (Segmentation fault) @ 0 (0) ---
+++ killed by SIGSEGV +++

Note how the values passed memory location is increasing all the time. From
/proc/pid/maps I found that this location is the stack (which I suppose should have been obvious to me, but I didn't really think about it).

Now, since there's apparently some usb stuff involved, I'll attach /proc/bus/usb/devices as well /proc/asound/cards.

If you need anything else let me know.

-- System Information:
Debian Release: testing/unstable
APT prefers unstable
APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: powerpc (ppc)
Shell: /bin/sh linked to /bin/bash
Kernel: Linux 2.6.12-rc5
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)

Versions of packages libasound2 depends on:
ii libc6 2.3.5-1 GNU C Library: Shared
libraries an

libasound2 recommends no packages.

-- no debconf information

T:  Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480 MxCh= 5
B:  Alloc=  0/800 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=01 MxPS= 8 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 2.06
S:  Manufacturer=Linux 2.6.12-rc5 ehci_hcd
S:  Product=NEC Corporation USB 2.0
S:  SerialNumber=0001:10:1b.2
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=256ms
T:  Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 2.06
S:  Manufacturer=Linux 2.6.12-rc5 ohci_hcd
S:  Product=NEC Corporation USB
(https://bugtrack.alsa-project.org/alsa-bug/view.php?id=2)
S:  SerialNumber=0001:10:1b.1
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=255ms
T:  Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 3
B:  Alloc= 11/900 us ( 1%), #Int=  1, #Iso=  0
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 2.06
S:  Manufacturer=Linux 2.6.12-rc5 ohci_hcd
S:  Product=NEC Corporation USB
S:  SerialNumber=0001:10:1b.0
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=255ms
T:  Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=1.5 MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=046d ProdID=c00e Rev=11.10
S:  Manufacturer=Logitech
S:  Product=USB-PS/2 Optical Mouse
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 98mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=01 Prot=02 Driver=usbhid
E:  Ad=81(I) Atr=03(Int.) MxPS=   4 Ivl=10ms
T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
B:  Alloc= 81/900 us ( 9%), #Int=  4, #Iso=  2
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 2.06
S:  Manufacturer=Linux 2.6.12-rc5 ohci_hcd
S:  Product=Apple Computer Inc. KeyLargo/Intrepid USB
(https://bugtrack.alsa-project.org/alsa-bug/view.php?id=2)
S:  SerialNumber=0001:10:1a.0
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=255ms
T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  7 Spd=12  MxCh= 0
D:  Ver= 2.00 Cls=e0(unk. ) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=05ac ProdID=8205 Rev=17.92
C:* #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:  If#= 1 Alt= 0 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(unk. ) Sub=01 Prot=01 Driver=hci_usb
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
I:  If#= 2 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=00 Driver=(none)
T:  Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#=  6 Spd=12  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=05ac ProdID=020e Rev= 0.28
S:  Manufacturer=Apple Computer
S:  Product=Apple Internal Keyboard/Trackpad
C:* #Ifs= 3 Cfg#= 1 Atr=a0 MxPwr= 40mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=01 Prot=01 Driver=usbhid
E:  Ad=83(I) Atr=03(Int.) MxPS=   8 Ivl=10ms
I:  If#= 1 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=01 Prot=02 Driver=atp
E:  Ad=81(I) Atr=03(Int.) MxPS=  32 Ivl=1ms
I:  If#= 2 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=00 Prot=00 Driver=usbhid
E:  Ad=84(I) Atr=03(Int.) MxPS=   1 Ivl=10ms

0 [Snapper ]: PMac Snapper - PowerMac Snapper
PowerMac Snapper (Dev 0) Sub-frame 0

======================================================================

Issue History
Date Modified Username Field Change
======================================================================
07-08-05 13:54 jdthood New Issue
======================================================================

-------------------------------------------------------
This SF.Net email is sponsored by the 'Do More With Dual!' webinar happening July 14 at 8am PDT/11am EDT. We invite you to explore the latest in dual core and dual graphics technology at this free one hour event hosted by HP, AMD, and NVIDIA. To register visit http://www.hp.com/go/dualwebinar