USB: gadget: Add ID numbers to configfs-gadget driver names
PATCH v3 1/1 USB: gadget: Add ID numbers to configfs-gadget driver names
It is unable to use configfs to attach more than one gadget. When attaching the second gadget, it always fails and the kernel message prints out:
Error: Driver 'configfs-gadget' is already registered, aborting... UDC core: g1: driver registration failed: -16
This commit fixes the problem by using the gadget name as a suffix to each configfs_gadget's driver name, thus making the names distinct.
---
Changes in v3:
- Use the gadget name as a unique suffix instead [Andrzej]
- Remove the driver.name allocation by template [Chanh]
- Update commit message [Chanh]
Changes in v2:
- Replace scnprintf() by kasprintf() to simplify the code [CJ]
- Move the clean up code from gadgets_drop() to
gadget_info_attr_release() [Frank Li]
- Correct the resource free up in gadges_make() [Alan Stern]
- Remove the unnecessary variable in gadgets_make() [Chanh]
- Fixes minor grammar issue in commit message [Chanh]
--- drivers/usb/gadget/configfs.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-)
drivers/usb/gadget/configfs.c +10 -2
@@ -393,6 +393,7 @@ static void gadget_info_attr_release(struct config_item *item)WARN_ON (!list_empty (&gi->string_list));WARN_ON (!list_empty (&gi->available_func));kfree (gi->composite.gadget_driver.function); +kfree (gi->composite.gadget_driver.driver.name);kfree (gi); }
@@ -1572,7 +1573,6 @@ static const struct usb_gadget_driver configfs_driver_template = { .max_speed = USB_SPEED_SUPER_PLUS, .driver = { .owner = THIS_MODULE, - .name = "configfs-gadget", }, .match_existing_only = 1, };
@@ -1623,13 +1623,21 @@ static struct config_group *gadgets_make( gi->composite.gadget_driver = configfs_driver_template; + gi->composite.gadget_driver.driver.name =kasprintf (GFP_KERNEL , +"configfs-gadget.%s" , name); +if (!gi->composite.gadget_driver.driver.name) + goto err; + gi->composite.gadget_driver.function =kstrdup (name,GFP_KERNEL ); gi->composite.name = gi->composite.gadget_driver.function;if (!gi->composite.gadget_driver.function) - goto err; + goto out_free_driver_name;return &gi->group; + +out_free_driver_name: +kfree (gi->composite.gadget_driver.driver.name); err:kfree (gi);return ERR_PTR (-ENOMEM );
Signature · 1 line
2.17.1
Hello,
W dniu 11.01.2023 o 07:51, Chanh Nguyen pisze:
Quoted 52 lines
It is unable to use configfs to attach more than one gadget. When attaching the second gadget, it always fails and the kernel message prints out:
Error: Driver 'configfs-gadget' is already registered, aborting... UDC core: g1: driver registration failed: -16
This commit fixes the problem by using the gadget name as a suffix to each configfs_gadget's driver name, thus making the names distinct.
Fixes fc274c1e9973 ("USB: gadget: Add a new bus for gadgets")Signed-off-by Chanh Nguyen <[email protected]>---
Changes in v3:
- Use the gadget name as a unique suffix instead [Andrzej]
- Remove the driver.name allocation by template [Chanh]
- Update commit message [Chanh]Changes in v2:
- Replacescnprintf()bykasprintf()to simplify the code [CJ]
- Move the clean up code fromgadgets_drop()to
gadget_info_attr_release()[Frank Li]
- Correct the resource free up ingadges_make()[Alan Stern]
- Remove the unnecessary variable ingadgets_make()[Chanh]
- Fixes minor grammar issue in commit message [Chanh]--- drivers/usb/gadget/configfs.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-)drivers/usb/gadget/configfs.c +1
-1@@ -393,6 +393,7 @@ static void gadget_info_attr_release(struct config_item *item)WARN_ON (!list_empty (&gi->string_list));WARN_ON (!list_empty (&gi->available_func));kfree (gi->composite.gadget_driver.function); +kfree (gi->composite.gadget_driver.driver.name);kfree (gi); }@@ -1572,7 +1573,6 @@ static const struct usb_gadget_driver configfs_driver_template = { .max_speed = USB_SPEED_SUPER_PLUS, .driver = { .owner = THIS_MODULE, - .name = "configfs-gadget", }, .match_existing_only = 1, };
drivers/usb/gadget/configfs.c static struct config_group *gadgets_make( · line 1627
Quoted 5 lines
drivers/usb/gadget/configfs.c +2
-0@@ -1623,13 +1623,21 @@ static struct config_group *gadgets_make( gi->composite.gadget_driver = configfs_driver_template; + gi->composite.gadget_driver.driver.name =kasprintf (GFP_KERNEL , +"configfs-gadget.%s" , name);
This line is 88 chars long, which means you're taking advantage of checkpatch allowing 100 columns nowadays. That's absolutely fine. If you collapse the above two lines into one, the combined length is exactly 100 chars, so you might just as well use a single line. In any case (collapsed or not) you can add my
Quoted 17 lines
drivers/usb/gadget/configfs.c +7
-1+if (!gi->composite.gadget_driver.driver.name) + goto err; + gi->composite.gadget_driver.function =kstrdup (name,GFP_KERNEL ); gi->composite.name = gi->composite.gadget_driver.function;if (!gi->composite.gadget_driver.function) - goto err; + goto out_free_driver_name;return &gi->group; + +out_free_driver_name: +kfree (gi->composite.gadget_driver.driver.name); err:kfree (gi);return ERR_PTR (-ENOMEM );
Quoted 65 lines · Andrzej Pietrasiewicz
Hello,
W dniu 11.01.2023 o 07:51, Chanh Nguyen pisze:
Quoted 53 lines
It is unable to use configfs to attach more than one gadget. When attaching the second gadget, it always fails and the kernel message prints out:
Error: Driver 'configfs-gadget' is already registered, aborting... UDC core: g1: driver registration failed: -16
This commit fixes the problem by using the gadget name as a suffix to each configfs_gadget's driver name, thus making the names distinct.
Fixes fc274c1e9973 ("USB: gadget: Add a new bus for gadgets")Signed-off-by Chanh Nguyen <[email protected]>---
Changes in v3:
- Use the gadget name as a unique suffix instead [Andrzej]
- Remove the driver.name allocation by template [Chanh]
- Update commit message [Chanh]Changes in v2:
- Replacescnprintf()bykasprintf()to simplify the code [CJ]
- Move the clean up code fromgadgets_drop()to gadget_info_attr_release() [Frank Li]
- Correct the resource free up in gadges_make() [Alan Stern]
- Remove the unnecessary variable in gadgets_make() [Chanh]
- Fixes minor grammar issue in commit message [Chanh]
---
drivers/usb/gadget/configfs.c| 12 ++++++++++--1 file changed, 10 insertions(+), 2 deletions(-)drivers/usb/gadget/configfs.c +1
-1@@ -393,6 +393,7 @@ static void gadget_info_attr_release(struct config_item *item) WARN_ON(!list_empty(&gi->string_list)); WARN_ON(!list_empty(&gi->available_func)); kfree(gi->composite.gadget_driver.function); + kfree(gi->composite.gadget_driver.driver.name); kfree(gi); }@@ -1572,7 +1573,6 @@ static const struct usb_gadget_driver configfs_driver_template = { .max_speed = USB_SPEED_SUPER_PLUS, .driver = { .owner = THIS_MODULE, - .name = "configfs-gadget", }, .match_existing_only = 1,};
drivers/usb/gadget/configfs.c static struct config_group *gadgets_make( · line 1625
Quoted 3 lines
drivers/usb/gadget/configfs.c +2
-0@@ -1623,13 +1623,21 @@ static struct config_group *gadgets_make( gi->composite.gadget_driver = configfs_driver_template; + gi->composite.gadget_driver.driver.name = kasprintf(GFP_KERNEL, + "configfs-gadget.%s", name);This line is 88 chars long, which means you're taking advantage of checkpatch allowing 100 columns nowadays. That's absolutely fine. If you collapse the above two lines into one, the combined length is exactly 100 chars, so you might just as well use a single line. In any case (collapsed or not) you can add my
Quoted 2 lines
Reviewed-by Andrzej Pietrasiewicz <[email protected]>
Thanks Andrzej for the review.
Just found out the commit title is not totally correct.
It should be "usb: gadget: Append name as suffix to configfs-gadget driver names".
I wonder if these issues could be fixed when get merged or should I resend a v4 with that two lines collapsed and with the title adjust?
Thanks a lot,
- Chanh
Quoted 16 lines
Quoted 15 lines
drivers/usb/gadget/configfs.c +7
-1+ if (!gi->composite.gadget_driver.driver.name) + goto err; + gi->composite.gadget_driver.function = kstrdup(name, GFP_KERNEL); gi->composite.name = gi->composite.gadget_driver.function; if (!gi->composite.gadget_driver.function) - goto err; + goto out_free_driver_name; return &gi->group; + +out_free_driver_name: + kfree(gi->composite.gadget_driver.driver.name);err:
kfree(gi);
returnERR_PTR(-ENOMEM);
Hi,
W dniu 12.01.2023 o 09:33, Chanh Nguyen pisze:
Quoted 68 lines · Andrzej Pietrasiewicz
Quoted 65 lines
Hello,
W dniu 11.01.2023 o 07:51, Chanh Nguyen pisze:
Quoted 53 lines
It is unable to use configfs to attach more than one gadget. When attaching the second gadget, it always fails and the kernel message prints out:
Error: Driver 'configfs-gadget' is already registered, aborting... UDC core: g1: driver registration failed: -16
This commit fixes the problem by using the gadget name as a suffix to each configfs_gadget's driver name, thus making the names distinct.
Fixes fc274c1e9973 ("USB: gadget: Add a new bus for gadgets")Signed-off-by Chanh Nguyen <[email protected]>---
Changes in v3:
- Use the gadget name as a unique suffix instead [Andrzej]
- Remove the driver.name allocation by template [Chanh]
- Update commit message [Chanh]Changes in v2:
- Replacescnprintf()bykasprintf()to simplify the code [CJ]
- Move the clean up code fromgadgets_drop()to gadget_info_attr_release() [Frank Li]
- Correct the resource free up in gadges_make() [Alan Stern]
- Remove the unnecessary variable in gadgets_make() [Chanh]
- Fixes minor grammar issue in commit message [Chanh]
---
drivers/usb/gadget/configfs.c| 12 ++++++++++--1 file changed, 10 insertions(+), 2 deletions(-)drivers/usb/gadget/configfs.c +1
-1@@ -393,6 +393,7 @@ static void gadget_info_attr_release(struct config_item *item) WARN_ON(!list_empty(&gi->string_list)); WARN_ON(!list_empty(&gi->available_func)); kfree(gi->composite.gadget_driver.function); + kfree(gi->composite.gadget_driver.driver.name); kfree(gi); }@@ -1572,7 +1573,6 @@ static const struct usb_gadget_driver configfs_driver_template = { .max_speed = USB_SPEED_SUPER_PLUS, .driver = { .owner = THIS_MODULE, - .name = "configfs-gadget", }, .match_existing_only = 1,};
drivers/usb/gadget/configfs.c static struct config_group *gadgets_make( · line 1625
Quoted 3 lines
drivers/usb/gadget/configfs.c +2
-0@@ -1623,13 +1623,21 @@ static struct config_group *gadgets_make( gi->composite.gadget_driver = configfs_driver_template; + gi->composite.gadget_driver.driver.name = kasprintf(GFP_KERNEL, + "configfs-gadget.%s", name);This line is 88 chars long, which means you're taking advantage of checkpatch allowing 100 columns nowadays. That's absolutely fine. If you collapse the above two lines into one, the combined length is exactly 100 chars, so you might just as well use a single line. In any case (collapsed or not) you can add my
Quoted 8 lines
Quoted 2 lines
Reviewed-by Andrzej Pietrasiewicz <[email protected]>Thanks Andrzej for the review.
Just found out the commit title is not totally correct.
It should be "usb: gadget: Append name as suffix to configfs-gadget driver names".
Heh, good catch :D
"Append gadget name to configfs-gadget driver names?"
I'm not a native speaker, but to me "to append" is the opposite of "to prepend", isn't it? So IMO "to append" already contains the notion of "adding at the end", which is the same thing as a suffix. I also suggest it is better to qualify the "name", it is not just any name, it is specifically a gadget name. If you only insert the word "gadget" and don't remove "as suffix" then the title becomes lengthy, hence my suggestion as above.
Quoted 1 line
I wonder if these issues could be fixed when get merged or should I resend a v4 with that two lines collapsed and with the title adjust?
If it is only about making the title better reflect patch contents and whitespace changes I'd say it is ok to send a v4 with Reviewed-by and Tested-by already added. Not making the maintainer think why there's no ID numbers is a good thing. But then Greg's automaton might get confused if it sees a v4 without v1, 2 and 3 preceding it. I'm not sure how it reacts if you reply-to v3 with corrected title, either. On the flip side, if you send a new patch (without any v number) in a new thread, you also make the maintainer think why the patch already contains R-b and T-b, so...
Regards,
Andrzej
Quoted 20 lines
Thanks a lot,
- ChanhQuoted 16 lines
Quoted 15 lines
drivers/usb/gadget/configfs.c +7
-1+ if (!gi->composite.gadget_driver.driver.name) + goto err; + gi->composite.gadget_driver.function = kstrdup(name, GFP_KERNEL); gi->composite.name = gi->composite.gadget_driver.function; if (!gi->composite.gadget_driver.function) - goto err; + goto out_free_driver_name; return &gi->group; + +out_free_driver_name: + kfree(gi->composite.gadget_driver.driver.name);err:
kfree(gi);
returnERR_PTR(-ENOMEM);
Quoted 28 lines
-----Original Message-----
From: Chanh Nguyen <[email protected]>
Sent: Wednesday, January 11, 2023 12:51 AM
To: OpenBMC Maillist <[email protected]>; Greg Kroah-Hartman <[email protected]>; Frank Li <[email protected]>; Christophe JAILLET <[email protected]>; Dan Vacura <[email protected]>; Jakob Koschel <[email protected]>; Alan Stern <[email protected]>; Vijayavardhan Vennapusa <[email protected]>; Rondreis <[email protected]>; Andrzej Pietrasiewicz <[email protected]>; Heikki Krogerus <[email protected]>; [email protected]; linux- [email protected]; Open Source Submission <[email protected]>
Cc: Chanh Nguyen <[email protected]>
Subject: [EXT] [PATCH v3] USB: gadget: Add ID numbers to configfs-gadget driver namesCaution: EXT Email
It is unable to use configfs to attach more than one gadget. When attaching the second gadget, it always fails and the kernel message prints out:
Error: Driver 'configfs-gadget' is already registered, aborting... UDC core: g1: driver registration failed: -16
Quoted 6 lines
This commit fixes the problem by using the gadget name as a suffix to each configfs_gadget's driver name, thus making the names distinct.
Fixes fc274c1e9973 ("USB: gadget: Add a new bus for gadgets")Signed-off-by Chanh Nguyen <[email protected]>
Quoted 65 lines
---
Changes in v3:
- Use the gadget name as a unique suffix instead [Andrzej]
- Remove the driver.name allocation by template [Chanh]
- Update commit message [Chanh]Changes in v2:
- Replacescnprintf()bykasprintf()to simplify the code [CJ]
- Move the clean up code fromgadgets_drop()to
gadget_info_attr_release()[Frank Li]
- Correct the resource free up ingadges_make()[Alan Stern]
- Remove the unnecessary variable ingadgets_make()[Chanh]
- Fixes minor grammar issue in commit message [Chanh]--- drivers/usb/gadget/configfs.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-)drivers/usb/gadget/configfs.c +1
-1@@ -393,6 +393,7 @@ static void gadget_info_attr_release(struct config_item *item) WARN_ON(!list_empty(&gi->string_list));WARN_ON (!list_empty (&gi->available_func));kfree (gi->composite.gadget_driver.function); +kfree (gi->composite.gadget_driver.driver.name);kfree (gi); }@@ -1572,7 +1573,6 @@ static const struct usb_gadget_driver configfs_driver_template = { .max_speed = USB_SPEED_SUPER_PLUS, .driver = { .owner = THIS_MODULE, - .name = "configfs-gadget", }, .match_existing_only = 1,};
drivers/usb/gadget/configfs.c +9
-2@@ -1623,13 +1623,21 @@ static struct config_group *gadgets_make( gi->composite.gadget_driver = configfs_driver_template; + gi->composite.gadget_driver.driver.name =kasprintf (GFP_KERNEL , +"configfs-gadget.%s" , name); +if (!gi->composite.gadget_driver.driver.name) + goto err; + gi->composite.gadget_driver.function =kstrdup (name,GFP_KERNEL ); gi->composite.name = gi->composite.gadget_driver.function;if (!gi->composite.gadget_driver.function) - goto err; + goto out_free_driver_name;return &gi->group; + +out_free_driver_name: +kfree (gi->composite.gadget_driver.driver.name); err:kfree (gi);return ERR_PTR (-ENOMEM ); --2.17.1
Quoted 28 lines · Frank Li
Quoted 28 lines
-----Original Message-----
From: Chanh Nguyen <[email protected]>
Sent: Wednesday, January 11, 2023 12:51 AM
To: OpenBMC Maillist <[email protected]>; Greg Kroah-Hartman <[email protected]>; Frank Li <[email protected]>; Christophe JAILLET <[email protected]>; Dan Vacura <[email protected]>; Jakob Koschel <[email protected]>; Alan Stern <[email protected]>; Vijayavardhan Vennapusa <[email protected]>; Rondreis <[email protected]>; Andrzej Pietrasiewicz <[email protected]>; Heikki Krogerus <[email protected]>; [email protected]; linux- [email protected]; Open Source Submission <[email protected]>
Cc: Chanh Nguyen <[email protected]>
Subject: [EXT] [PATCH v3] USB: gadget: Add ID numbers to configfs-gadget driver namesCaution: EXT Email
It is unable to use configfs to attach more than one gadget. When attaching the second gadget, it always fails and the kernel message prints out:
Error: Driver 'configfs-gadget' is already registered, aborting... UDC core: g1: driver registration failed: -16
Quoted 9 lines
Quoted 6 lines
This commit fixes the problem by using the gadget name as a suffix to each configfs_gadget's driver name, thus making the names distinct.
Fixes fc274c1e9973 ("USB: gadget: Add a new bus for gadgets")Signed-off-by Chanh Nguyen <[email protected]>Reviewed-by Frank Li <[email protected]>
Thanks Frank!
Quoted 66 lines
Quoted 65 lines
---
Changes in v3:
- Use the gadget name as a unique suffix instead [Andrzej]
- Remove the driver.name allocation by template [Chanh]
- Update commit message [Chanh]Changes in v2:
- Replacescnprintf()bykasprintf()to simplify the code [CJ]
- Move the clean up code fromgadgets_drop()to
gadget_info_attr_release()[Frank Li]
- Correct the resource free up ingadges_make()[Alan Stern]
- Remove the unnecessary variable ingadgets_make()[Chanh]
- Fixes minor grammar issue in commit message [Chanh]--- drivers/usb/gadget/configfs.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-)drivers/usb/gadget/configfs.c +1
-1@@ -393,6 +393,7 @@ static void gadget_info_attr_release(struct config_item *item) WARN_ON(!list_empty(&gi->string_list));WARN_ON (!list_empty (&gi->available_func));kfree (gi->composite.gadget_driver.function); +kfree (gi->composite.gadget_driver.driver.name);kfree (gi); }@@ -1572,7 +1573,6 @@ static const struct usb_gadget_driver configfs_driver_template = { .max_speed = USB_SPEED_SUPER_PLUS, .driver = { .owner = THIS_MODULE, - .name = "configfs-gadget", }, .match_existing_only = 1,};drivers/usb/gadget/configfs.c +9
-2@@ -1623,13 +1623,21 @@ static struct config_group *gadgets_make( gi->composite.gadget_driver = configfs_driver_template; + gi->composite.gadget_driver.driver.name =kasprintf (GFP_KERNEL , +"configfs-gadget.%s" , name); +if (!gi->composite.gadget_driver.driver.name) + goto err; + gi->composite.gadget_driver.function =kstrdup (name,GFP_KERNEL ); gi->composite.name = gi->composite.gadget_driver.function;if (!gi->composite.gadget_driver.function) - goto err; + goto out_free_driver_name;return &gi->group; + +out_free_driver_name: +kfree (gi->composite.gadget_driver.driver.name); err:kfree (gi);return ERR_PTR (-ENOMEM ); --2.17.1
Quoted 7 lines · Chanh Nguyen
It is unable to use configfs to attach more than one gadget. When attaching the second gadget, it always fails and the kernel message prints out:
Error: Driver 'configfs-gadget' is already registered, aborting... UDC core: g1: driver registration failed: -16
Quoted 6 lines
This commit fixes the problem by using the gadget name as a suffix to each configfs_gadget's driver name, thus making the names distinct.
Fixes fc274c1e9973 ("USB: gadget: Add a new bus for gadgets")Signed-off-by Chanh Nguyen <[email protected]>
Thanks!
Quoted 62 lines
---
Changes in v3:
- Use the gadget name as a unique suffix instead [Andrzej]
- Remove the driver.name allocation by template [Chanh]
- Update commit message [Chanh]Changes in v2:
- Replacescnprintf()bykasprintf()to simplify the code [CJ]
- Move the clean up code fromgadgets_drop()to
gadget_info_attr_release()[Frank Li]
- Correct the resource free up ingadges_make()[Alan Stern]
- Remove the unnecessary variable ingadgets_make()[Chanh]
- Fixes minor grammar issue in commit message [Chanh]--- drivers/usb/gadget/configfs.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-)drivers/usb/gadget/configfs.c +10
-2@@ -393,6 +393,7 @@ static void gadget_info_attr_release(struct config_item *item)WARN_ON (!list_empty (&gi->string_list));WARN_ON (!list_empty (&gi->available_func));kfree (gi->composite.gadget_driver.function); +kfree (gi->composite.gadget_driver.driver.name);kfree (gi); }@@ -1572,7 +1573,6 @@ static const struct usb_gadget_driver configfs_driver_template = { .max_speed = USB_SPEED_SUPER_PLUS, .driver = { .owner = THIS_MODULE, - .name = "configfs-gadget", }, .match_existing_only = 1, };@@ -1623,13 +1623,21 @@ static struct config_group *gadgets_make( gi->composite.gadget_driver = configfs_driver_template; + gi->composite.gadget_driver.driver.name =kasprintf (GFP_KERNEL , +"configfs-gadget.%s" , name); +if (!gi->composite.gadget_driver.driver.name) + goto err; + gi->composite.gadget_driver.function =kstrdup (name,GFP_KERNEL ); gi->composite.name = gi->composite.gadget_driver.function;if (!gi->composite.gadget_driver.function) - goto err; + goto out_free_driver_name;return &gi->group; + +out_free_driver_name: +kfree (gi->composite.gadget_driver.driver.name); err:kfree (gi);return ERR_PTR (-ENOMEM );Signature · 1 line
2.17.1
Signature · 1 line
heikki
Quoted 12 lines · Heikki Krogerus
Quoted 11 lines · Chanh Nguyen
It is unable to use configfs to attach more than one gadget. When attaching the second gadget, it always fails and the kernel message prints out:
Error: Driver 'configfs-gadget' is already registered, aborting... UDC core: g1: driver registration failed: -16
This commit fixes the problem by using the gadget name as a suffix to each configfs_gadget's driver name, thus making the names distinct.
Quoted 7 lines
Quoted 2 lines
Fixes fc274c1e9973 ("USB: gadget: Add a new bus for gadgets")Signed-off-by Chanh Nguyen <[email protected]>Tested-by Heikki Krogerus <[email protected]>Thanks!
Thanks Heikki!
Quoted 63 lines
Quoted 62 lines
---
Changes in v3:
- Use the gadget name as a unique suffix instead [Andrzej]
- Remove the driver.name allocation by template [Chanh]
- Update commit message [Chanh]Changes in v2:
- Replacescnprintf()bykasprintf()to simplify the code [CJ]
- Move the clean up code fromgadgets_drop()to
gadget_info_attr_release()[Frank Li]
- Correct the resource free up ingadges_make()[Alan Stern]
- Remove the unnecessary variable ingadgets_make()[Chanh]
- Fixes minor grammar issue in commit message [Chanh]--- drivers/usb/gadget/configfs.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-)drivers/usb/gadget/configfs.c +10
-2@@ -393,6 +393,7 @@ static void gadget_info_attr_release(struct config_item *item)WARN_ON (!list_empty (&gi->string_list));WARN_ON (!list_empty (&gi->available_func));kfree (gi->composite.gadget_driver.function); +kfree (gi->composite.gadget_driver.driver.name);kfree (gi); }@@ -1572,7 +1573,6 @@ static const struct usb_gadget_driver configfs_driver_template = { .max_speed = USB_SPEED_SUPER_PLUS, .driver = { .owner = THIS_MODULE, - .name = "configfs-gadget", }, .match_existing_only = 1, };@@ -1623,13 +1623,21 @@ static struct config_group *gadgets_make( gi->composite.gadget_driver = configfs_driver_template; + gi->composite.gadget_driver.driver.name =kasprintf (GFP_KERNEL , +"configfs-gadget.%s" , name); +if (!gi->composite.gadget_driver.driver.name) + goto err; + gi->composite.gadget_driver.function =kstrdup (name,GFP_KERNEL ); gi->composite.name = gi->composite.gadget_driver.function;if (!gi->composite.gadget_driver.function) - goto err; + goto out_free_driver_name;return &gi->group; + +out_free_driver_name: +kfree (gi->composite.gadget_driver.driver.name); err:kfree (gi);return ERR_PTR (-ENOMEM );Signature · 1 line
2.17.1