dmaengine: ti: k3-udma-glue: move psi-l pairing in channel en/dis functions
Subsystems (2)
PATCH 1/1 dmaengine: ti: k3-udma-glue: move psi-l pairing in channel en/dis functions
The NAVSS UDMA will stuck if target IP module is disabled by PM while PSI-L threads are paired UDMA<->IP and no further transfers is possible. This could be the case for IPs J721E Main CPSW (cpsw9g).
Hence, to avoid such situation do PSI-L threads pairing only when UDMA channel is going to be enabled as at this time DMA consumer module expected to be active already.
--- drivers/dma/ti/k3-udma-glue.c | 64 +++++++++++++++++++++-------------- 1 file changed, 38 insertions(+), 26 deletions(-)
drivers/dma/ti/k3-udma-glue.c +38 -26
@@ -303,19 +303,6 @@ struct k3_udma_glue_tx_channel *k3_udma_glue_request_tx_chn(struct device *dev, goto err; } - ret =xudma_navss_psil_pair (tx_chn->common.udmax, - tx_chn->common.src_thread, - tx_chn->common.dst_thread); -if (ret) { -dev_err (dev,"PSI-L request err %d\n" , ret); - goto err; - } - - tx_chn->psil_paired = true; - -/* reset TX RT registers */ -k3_udma_glue_disable_tx_chn (tx_chn); -k3_udma_glue_dump_tx_chn (tx_chn);return tx_chn;
@@ -378,6 +365,18 @@ EXPORT_SYMBOL_GPL(k3_udma_glue_pop_tx_chn);int k3_udma_glue_enable_tx_chn (struct k3_udma_glue_tx_channel *tx_chn) { +int ret; + + ret =xudma_navss_psil_pair (tx_chn->common.udmax, + tx_chn->common.src_thread, + tx_chn->common.dst_thread); +if (ret) { +dev_err (tx_chn->common.dev,"PSI-L request err %d\n" , ret); +return ret; + } + + tx_chn->psil_paired = true; +xudma_tchanrt_write (tx_chn->udma_tchanx,UDMA_CHAN_RT_PEER_RT_EN_REG ,UDMA_PEER_RT_EN_ENABLE );
@@ -398,6 +397,13 @@ void k3_udma_glue_disable_tx_chn(struct k3_udma_glue_tx_channel *tx_chn)xudma_tchanrt_write (tx_chn->udma_tchanx,UDMA_CHAN_RT_PEER_RT_EN_REG ,0 );k3_udma_glue_dump_tx_rt_chn (tx_chn,"txchn dis2" ); + +if (tx_chn->psil_paired) { +xudma_navss_psil_unpair (tx_chn->common.udmax, + tx_chn->common.src_thread, + tx_chn->common.dst_thread); + tx_chn->psil_paired = false; + } }EXPORT_SYMBOL_GPL (k3_udma_glue_disable_tx_chn);
@@ -815,19 +821,6 @@ k3_udma_glue_request_rx_chn_priv(struct device *dev, const char *name, goto err; } - ret =xudma_navss_psil_pair (rx_chn->common.udmax, - rx_chn->common.src_thread, - rx_chn->common.dst_thread); -if (ret) { -dev_err (dev,"PSI-L request err %d\n" , ret); - goto err; - } - - rx_chn->psil_paired = true; - -/* reset RX RT registers */ -k3_udma_glue_disable_rx_chn (rx_chn); -k3_udma_glue_dump_rx_chn (rx_chn);return rx_chn;
@@ -1052,12 +1045,24 @@ EXPORT_SYMBOL_GPL(k3_udma_glue_rx_flow_disable);int k3_udma_glue_enable_rx_chn (struct k3_udma_glue_rx_channel *rx_chn) { +int ret; +if (rx_chn->remote)return -EINVAL ;if (rx_chn->flows_ready < rx_chn->flow_num)return -EINVAL ; + ret =xudma_navss_psil_pair (rx_chn->common.udmax, + rx_chn->common.src_thread, + rx_chn->common.dst_thread); +if (ret) { +dev_err (rx_chn->common.dev,"PSI-L request err %d\n" , ret); +return ret; + } + + rx_chn->psil_paired = true; +xudma_rchanrt_write (rx_chn->udma_rchanx,UDMA_CHAN_RT_CTL_REG ,UDMA_CHAN_RT_CTL_EN );
@@ -1078,6 +1083,13 @@ void k3_udma_glue_disable_rx_chn(struct k3_udma_glue_rx_channel *rx_chn)xudma_rchanrt_write (rx_chn->udma_rchanx,UDMA_CHAN_RT_CTL_REG ,0 );k3_udma_glue_dump_rx_rt_chn (rx_chn,"rxrt dis2" ); + +if (rx_chn->psil_paired) { +xudma_navss_psil_unpair (rx_chn->common.udmax, + rx_chn->common.src_thread, + rx_chn->common.dst_thread); + rx_chn->psil_paired = false; + } }EXPORT_SYMBOL_GPL (k3_udma_glue_disable_rx_chn);
Signature · 1 line
2.17.1
Quoted 7 lines · Grygorii Strashko
The NAVSS UDMA will stuck if target IP module is disabled by PM while PSI-L threads are paired UDMA<->IP and no further transfers is possible. This could be the case for IPs J721E Main CPSW (cpsw9g).
Hence, to avoid such situation do PSI-L threads pairing only when UDMA channel is going to be enabled as at this time DMA consumer module expected to be active already.
Is this patch on top of the AM64 (BCDMA/PKTDMA) series or not? Will it cause any conflict?
Quoted 112 lines
Signed-off-by Grygorii Strashko <[email protected]>--- drivers/dma/ti/k3-udma-glue.c | 64 +++++++++++++++++++++-------------- 1 file changed, 38 insertions(+), 26 deletions(-)drivers/dma/ti/k3-udma-glue.c +31
-26@@ -303,19 +303,6 @@ struct k3_udma_glue_tx_channel *k3_udma_glue_request_tx_chn(struct device *dev, goto err; } - ret =xudma_navss_psil_pair (tx_chn->common.udmax, - tx_chn->common.src_thread, - tx_chn->common.dst_thread); -if (ret) { -dev_err (dev,"PSI-L request err %d\n" , ret); - goto err; - } - - tx_chn->psil_paired = true; - -/* reset TX RT registers */ -k3_udma_glue_disable_tx_chn (tx_chn); -k3_udma_glue_dump_tx_chn (tx_chn);return tx_chn;@@ -378,6 +365,18 @@ EXPORT_SYMBOL_GPL(k3_udma_glue_pop_tx_chn);int k3_udma_glue_enable_tx_chn (struct k3_udma_glue_tx_channel *tx_chn) { +int ret; + + ret =xudma_navss_psil_pair (tx_chn->common.udmax, + tx_chn->common.src_thread, + tx_chn->common.dst_thread); +if (ret) { +dev_err (tx_chn->common.dev,"PSI-L request err %d\n" , ret); +return ret; + } + + tx_chn->psil_paired = true; +xudma_tchanrt_write (tx_chn->udma_tchanx,UDMA_CHAN_RT_PEER_RT_EN_REG ,UDMA_PEER_RT_EN_ENABLE );@@ -398,6 +397,13 @@ void k3_udma_glue_disable_tx_chn(struct k3_udma_glue_tx_channel *tx_chn)xudma_tchanrt_write (tx_chn->udma_tchanx,UDMA_CHAN_RT_PEER_RT_EN_REG ,0 );k3_udma_glue_dump_tx_rt_chn (tx_chn,"txchn dis2" ); + +if (tx_chn->psil_paired) { +xudma_navss_psil_unpair (tx_chn->common.udmax, + tx_chn->common.src_thread, + tx_chn->common.dst_thread); + tx_chn->psil_paired = false; + } }EXPORT_SYMBOL_GPL (k3_udma_glue_disable_tx_chn);@@ -815,19 +821,6 @@ k3_udma_glue_request_rx_chn_priv(struct device *dev, const char *name, goto err; } - ret =xudma_navss_psil_pair (rx_chn->common.udmax, - rx_chn->common.src_thread, - rx_chn->common.dst_thread); -if (ret) { -dev_err (dev,"PSI-L request err %d\n" , ret); - goto err; - } - - rx_chn->psil_paired = true; - -/* reset RX RT registers */ -k3_udma_glue_disable_rx_chn (rx_chn); -k3_udma_glue_dump_rx_chn (rx_chn);return rx_chn;@@ -1052,12 +1045,24 @@ EXPORT_SYMBOL_GPL(k3_udma_glue_rx_flow_disable);int k3_udma_glue_enable_rx_chn (struct k3_udma_glue_rx_channel *rx_chn) { +int ret; +if (rx_chn->remote)return -EINVAL ;if (rx_chn->flows_ready < rx_chn->flow_num)return -EINVAL ; + ret =xudma_navss_psil_pair (rx_chn->common.udmax, + rx_chn->common.src_thread, + rx_chn->common.dst_thread); +if (ret) { +dev_err (rx_chn->common.dev,"PSI-L request err %d\n" , ret); +return ret; + } + + rx_chn->psil_paired = true; +xudma_rchanrt_write (rx_chn->udma_rchanx,UDMA_CHAN_RT_CTL_REG ,UDMA_CHAN_RT_CTL_EN );@@ -1078,6 +1083,13 @@ void k3_udma_glue_disable_rx_chn(struct k3_udma_glue_rx_channel *rx_chn)xudma_rchanrt_write (rx_chn->udma_rchanx,UDMA_CHAN_RT_CTL_REG ,0 );k3_udma_glue_dump_rx_rt_chn (rx_chn,"rxrt dis2" );
drivers/dma/ti/k3-udma-glue.c void k3_udma_glue_disable_rx_chn(struct k3_udma_glue_rx_channel *rx_chn) · line 1095
Quoted 10 lines
drivers/dma/ti/k3-udma-glue.c +7
-0+ +if (rx_chn->psil_paired) { +xudma_navss_psil_unpair (rx_chn->common.udmax, + rx_chn->common.src_thread, + rx_chn->common.dst_thread); + rx_chn->psil_paired = false; + } }EXPORT_SYMBOL_GPL (k3_udma_glue_disable_rx_chn);
- Péter
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
Quoted 7 lines · Peter Ujfalusi
Quoted 4 lines · Grygorii Strashko
The NAVSS UDMA will stuck if target IP module is disabled by PM while PSI-L threads are paired UDMA<->IP and no further transfers is possible. This could be the case for IPs J721E Main CPSW (cpsw9g).
Quoted 6 lines
Quoted 3 lines
Hence, to avoid such situation do PSI-L threads pairing only when UDMA channel is going to be enabled as at this time DMA consumer module expected to be active already.
Is this patch on top of the AM64 (BCDMA/PKTDMA) series or not? Will it cause any conflict?
No. It was not based on top of AM64 series and I've not checked for conflicts.
Quoted 8 lines
Acked-by Peter Ujfalusi <[email protected]>Quoted 4 lines
Signed-off-by Grygorii Strashko <[email protected]>--- drivers/dma/ti/k3-udma-glue.c | 64 +++++++++++++++++++++-------------- 1 file changed, 38 insertions(+), 26 deletions(-)
...
Signature · 2 lines
Best regards, grygorii
Quoted 7 lines · Grygorii Strashko
The NAVSS UDMA will stuck if target IP module is disabled by PM while PSI-L threads are paired UDMA<->IP and no further transfers is possible. This could be the case for IPs J721E Main CPSW (cpsw9g).
Hence, to avoid such situation do PSI-L threads pairing only when UDMA channel is going to be enabled as at this time DMA consumer module expected to be active already.
Applied, thanks
Signature · 1 line
~Vinod