Skip to contentSkip to conversation

nvme-fabrics: add post connect auth code helper

PATCH In review Chaitanya Kulkarni 4 participants 13 messages Feb 8, 2024 – May 23, 2024

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

cover nvme-fabrics: add post connect auth code helper

Hi,

Post connect command authentication handling code is repeated into in nvmf_connect_admin_queue() and nvmf_connect_io_queue(). Moreover this code actully belongs to authentication and should not be a part of common code.

Add a helper to handle post connect command authentication. Use the same helper in nvmf_connect_[admin|io]_queue(). This also removes authentication specific code from a build where authentication feature is not configured.

I've tested the code with and without NVME_AUTH configured with blktests they are passing. Below is a detailed log.

-ck

Chaitanya Kulkarni (3):
nvme-fabrics: factor out auth code into helper
nvme-fabrics: use post connect auth helper
nvme-auth: unexport negotiate and wait functions

 drivers/nvme/host/auth.c    | 38 +++++++++++++++++++++++++---
 drivers/nvme/host/fabrics.c | 50 ++-----------------------------------
 drivers/nvme/host/nvme.h    | 16 ++++++------
 3 files changed, 43 insertions(+), 61 deletions(-)

Test Log :-

=======================================================================
* With NVME_AUTH Disabled :-

-----------------------------------------------------------------------
nvme (nvme-6.8) # git am p/nvme-fabrics-auth-post-connect/*patch Patch is empty.
When you have resolved this problem, run "git am --continue". If you prefer to skip this patch, run "git am --skip" instead. To record the empty patch as an empty commit, run "git am --allow-empty". To restore the original branch and stop patching, run "git am --abort". nvme (nvme-6.8) # git am --skip
Applying: nvme-fabrics: factor out auth code into helper
Applying: nvme-fabrics: use post connect auth helper
Applying: nvme-auth: unexport negotiate and wait functions
-----------------------------------------------------------------------
nvme (nvme-6.8) # grep NVME_AUTH .config
nvme (nvme-6.8) #
-----------------------------------------------------------------------
nvme (nvme-6.8) # ./compile_nvme.sh
++ nproc
+ make -j 48 M=drivers/nvme/target/ clean
++ nproc
+ make -j 48 M=drivers/nvme/host/ clean
++ nproc
+ make -j 48 M=drivers/nvme/ modules

  CC [M]  drivers/nvme/host/core.o
  CC [M]  drivers/nvme/host/ioctl.o
  CC [M]  drivers/nvme/target/core.o
  CC [M]  drivers/nvme/host/sysfs.o
  CC [M]  drivers/nvme/target/configfs.o
  CC [M]  drivers/nvme/host/pr.o
  CC [M]  drivers/nvme/target/admin-cmd.o
  CC [M]  drivers/nvme/host/constants.o
  CC [M]  drivers/nvme/target/fabrics-cmd.o
  CC [M]  drivers/nvme/host/trace.o
  CC [M]  drivers/nvme/target/discovery.o
  CC [M]  drivers/nvme/host/multipath.o
  CC [M]  drivers/nvme/target/io-cmd-file.o
  CC [M]  drivers/nvme/host/zns.o
  CC [M]  drivers/nvme/target/io-cmd-bdev.o
  CC [M]  drivers/nvme/host/fault_inject.o
  CC [M]  drivers/nvme/target/passthru.o
  CC [M]  drivers/nvme/host/hwmon.o
  CC [M]  drivers/nvme/target/zns.o
  CC [M]  drivers/nvme/target/trace.o
  CC [M]  drivers/nvme/host/pci.o
  CC [M]  drivers/nvme/host/fabrics.o
  CC [M]  drivers/nvme/target/loop.o
  CC [M]  drivers/nvme/target/rdma.o
  CC [M]  drivers/nvme/host/rdma.o
  CC [M]  drivers/nvme/target/fc.o
  CC [M]  drivers/nvme/host/fc.o
  CC [M]  drivers/nvme/host/tcp.o
  CC [M]  drivers/nvme/target/fcloop.o
  CC [M]  drivers/nvme/target/tcp.o
  LD [M]  drivers/nvme/target/nvme-loop.o
  LD [M]  drivers/nvme/host/nvme-fabrics.o
  LD [M]  drivers/nvme/target/nvme-fcloop.o
  LD [M]  drivers/nvme/target/nvmet.o
  LD [M]  drivers/nvme/target/nvmet-fc.o
  LD [M]  drivers/nvme/target/nvmet-rdma.o
  LD [M]  drivers/nvme/target/nvmet-tcp.o
  LD [M]  drivers/nvme/host/nvme-rdma.o
  LD [M]  drivers/nvme/host/nvme.o
  LD [M]  drivers/nvme/host/nvme-fc.o
  LD [M]  drivers/nvme/host/nvme-tcp.o
  LD [M]  drivers/nvme/host/nvme-core.o
  MODPOST drivers/nvme/Module.symvers
  CC [M]  drivers/nvme/common/nvme-keyring.mod.o
  CC [M]  drivers/nvme/host/nvme-core.mod.o
  CC [M]  drivers/nvme/host/nvme.mod.o
  CC [M]  drivers/nvme/host/nvme-fabrics.mod.o
  CC [M]  drivers/nvme/host/nvme-rdma.mod.o
  CC [M]  drivers/nvme/host/nvme-fc.mod.o
  CC [M]  drivers/nvme/host/nvme-tcp.mod.o
  CC [M]  drivers/nvme/target/nvmet.mod.o
  CC [M]  drivers/nvme/target/nvme-loop.mod.o
  CC [M]  drivers/nvme/target/nvmet-fc.mod.o
  CC [M]  drivers/nvme/target/nvmet-rdma.mod.o
  CC [M]  drivers/nvme/target/nvme-fcloop.mod.o
  CC [M]  drivers/nvme/target/nvmet-tcp.mod.o
  LD [M]  drivers/nvme/host/nvme-fabrics.ko
  LD [M]  drivers/nvme/common/nvme-keyring.ko
  LD [M]  drivers/nvme/host/nvme.ko
  LD [M]  drivers/nvme/host/nvme-fc.ko
  LD [M]  drivers/nvme/target/nvmet-rdma.ko
  LD [M]  drivers/nvme/host/nvme-core.ko
  LD [M]  drivers/nvme/host/nvme-rdma.ko
  LD [M]  drivers/nvme/host/nvme-tcp.ko
  LD [M]  drivers/nvme/target/nvmet.ko
  LD [M]  drivers/nvme/target/nvmet-tcp.ko
  LD [M]  drivers/nvme/target/nvmet-fc.ko
  LD [M]  drivers/nvme/target/nvme-loop.ko
  LD [M]  drivers/nvme/target/nvme-fcloop.ko

+ HOST=drivers/nvme/host
+ TARGET=drivers/nvme/target
++ uname -r
+ HOST_DEST=/lib/modules/6.8.0-rc1nvme+/kernel/drivers/nvme/host/
++ uname -r
+ TARGET_DEST=/lib/modules/6.8.0-rc1nvme+/kernel/drivers/nvme/target/
+ cp drivers/nvme/host/nvme-core.ko drivers/nvme/host/nvme-fabrics.ko drivers/nvme/host/nvme-fc.ko drivers/nvme/host/nvme.ko drivers/nvme/host/nvme-rdma.ko drivers/nvme/host/nvme-tcp.ko /lib/modules/6.8.0-rc1nvme+/kernel/drivers/nvme/host//
+ cp drivers/nvme/target/nvme-fcloop.ko drivers/nvme/target/nvme-loop.ko drivers/nvme/target/nvmet-fc.ko drivers/nvme/target/nvmet.ko drivers/nvme/target/nvmet-rdma.ko drivers/nvme/target/nvmet-tcp.ko /lib/modules/6.8.0-rc1nvme+/kernel/drivers/nvme/target//
+ ls -lrth /lib/modules/6.8.0-rc1nvme+/kernel/drivers/nvme/host/ /lib/modules/6.8.0-rc1nvme+/kernel/drivers/nvme/target//
/lib/modules/6.8.0-rc1nvme+/kernel/drivers/nvme/host/:
total 868K

-rw-r--r--. 1 root root 404K Feb  7 21:55 nvme-core.ko
-rw-r--r--. 1 root root  56K Feb  7 21:55 nvme-fabrics.ko
-rw-r--r--. 1 root root 112K Feb  7 21:55 nvme-fc.ko
-rw-r--r--. 1 root root 114K Feb  7 21:55 nvme.ko
-rw-r--r--. 1 root root  88K Feb  7 21:55 nvme-rdma.ko
-rw-r--r--. 1 root root  91K Feb  7 21:55 nvme-tcp.ko

/lib/modules/6.8.0-rc1nvme+/kernel/drivers/nvme/target//:
total 672K

-rw-r--r--. 1 root root  59K Feb  7 21:55 nvme-fcloop.ko
-rw-r--r--. 1 root root  36K Feb  7 21:55 nvme-loop.ko
-rw-r--r--. 1 root root  82K Feb  7 21:55 nvmet-fc.ko
-rw-r--r--. 1 root root 330K Feb  7 21:55 nvmet.ko
-rw-r--r--. 1 root root  83K Feb  7 21:55 nvmet-rdma.ko
-rw-r--r--. 1 root root  76K Feb  7 21:55 nvmet-tcp.ko

+ sync

-----------------------------------------------------------------------

nvme (nvme-6.8) # cdblktests
blktests (master) # ./check nvme
nvme/002 (create many subsystems and test discovery) [passed]

    runtime  23.465s  ...  23.259s
nvme/003 (test if we're sending keep-alives to a discovery controller) [passed]
    runtime  11.270s  ...  11.266s
nvme/004 (test nvme and nvmet UUID NS descriptors)           [passed]
    runtime  0.497s  ...  0.486s
nvme/005 (reset local loopback target)                       [passed]
    runtime  0.823s  ...  0.814s
nvme/006 (create an NVMeOF target with a block device-backed ns) [passed]
    runtime  0.091s  ...  0.100s
nvme/007 (create an NVMeOF target with a file-backed ns)     [passed]
    runtime  0.065s  ...  0.064s
nvme/008 (create an NVMeOF host with a block device-backed ns) [passed]
    runtime  0.473s  ...  0.494s
nvme/009 (create an NVMeOF host with a file-backed ns)       [passed]
    runtime  0.469s  ...  0.478s
nvme/010 (run data verification fio job on NVMeOF block device-backed ns) [passed]
    runtime  47.916s  ...  33.407s
nvme/011 (run data verification fio job on NVMeOF file-backed ns) [passed]
    runtime  119.908s  ...  164.147s
nvme/012 (run mkfs and data verification fio job on NVMeOF block device-backed ns) [passed]
    runtime  52.679s  ...  54.561s
nvme/013 (run mkfs and data verification fio job on NVMeOF file-backed ns) [passed]
    runtime  124.248s  ...  113.872s
nvme/014 (flush a NVMeOF block device-backed ns)             [passed]
    runtime  8.983s  ...  8.090s
nvme/015 (unit test for NVMe flush for file backed ns)       [passed]
    runtime  6.830s  ...  6.528s
nvme/016 (create/delete many NVMeOF block device-backed ns and test discovery) [passed]
    runtime  12.838s  ...  12.955s
nvme/017 (create/delete many file-ns and test discovery)     [passed]
    runtime  14.244s  ...  14.219s
nvme/018 (unit test NVMe-oF out of range access on a file backend) [passed]
    runtime  0.480s  ...  0.467s
nvme/019 (test NVMe DSM Discard command on NVMeOF block-device ns) [passed]
    runtime  0.502s  ...  0.492s
nvme/020 (test NVMe DSM Discard command on NVMeOF file-backed ns) [passed]
    runtime  0.453s  ...  0.465s
nvme/021 (test NVMe list command on NVMeOF file-backed ns)   [passed]
    runtime  0.455s  ...  0.465s
nvme/022 (test NVMe reset command on NVMeOF file-backed ns)  [passed]
    runtime  0.848s  ...  0.816s
nvme/023 (test NVMe smart-log command on NVMeOF block-device ns) [passed]
    runtime  0.497s  ...  0.492s
nvme/024 (test NVMe smart-log command on NVMeOF file-backed ns) [passed]
    runtime  0.465s  ...  0.471s
nvme/025 (test NVMe effects-log command on NVMeOF file-backed ns) [passed]
    runtime  0.472s  ...  0.455s
nvme/026 (test NVMe ns-descs command on NVMeOF file-backed ns) [passed]
    runtime  0.463s  ...  0.461s
nvme/027 (test NVMe ns-rescan command on NVMeOF file-backed ns) [passed]
    runtime  0.469s  ...  0.476s
nvme/028 (test NVMe list-subsys command on NVMeOF file-backed ns) [passed]
    runtime  0.473s  ...  0.467s
nvme/029 (test userspace IO via nvme-cli read/write interface) [passed]
    runtime  0.650s  ...  0.641s
nvme/030 (ensure the discovery generation counter is updated appropriately) [passed]
    runtime  0.262s  ...  0.240s
nvme/031 (test deletion of NVMeOF controllers immediately after setup) [passed]
    runtime  4.253s  ...  4.202s
nvme/038 (test deletion of NVMeOF subsystem without enabling) [passed]
    runtime  0.020s  ...  0.019s
nvme/040 (test nvme fabrics controller reset/disconnect operation during I/O) [passed]
    runtime  7.214s  ...  7.094s

nvme/041 (Create authenticated connections) [not run]
runtime 1.943s ...
kernel option NVME_AUTH has not been enabled
kernel option NVME_TARGET_AUTH has not been enabled
nvme-fabrics does not support dhchap_ctrl_secret
nvme/042 (Test dhchap key types for authenticated connections) [not run]
runtime 5.685s ...
kernel option NVME_AUTH has not been enabled
kernel option NVME_TARGET_AUTH has not been enabled
nvme-fabrics does not support dhchap_ctrl_secret
nvme/043 (Test hash and DH group variations for authenticated connections) [not run]
runtime 25.815s ...
kernel option NVME_AUTH has not been enabled
kernel option NVME_TARGET_AUTH has not been enabled
nvme-fabrics does not support dhchap_ctrl_secret
nvme/044 (Test bi-directional authentication) [not run]
runtime 4.107s ...
kernel option NVME_AUTH has not been enabled
kernel option NVME_TARGET_AUTH has not been enabled
nvme-fabrics does not support dhchap_ctrl_secret
nvme/045 (Test re-authentication) [not run]
runtime 1.689s ...
kernel option NVME_AUTH has not been enabled
kernel option NVME_TARGET_AUTH has not been enabled
nvme-fabrics does not support dhchap_ctrl_secret
nvme/047 (test different queue types for fabric transports) [not run]
nvme_trtype=loop is not supported in this test
nvme/048 (Test queue count changes on reconnect) [not run]
nvme_trtype=loop is not supported in this test
blktests (master) #

=======================================================================
* With NVME_AUTH enabled :-

-----------------------------------------------------------------------
nvme (nvme-6.8) # gitlog -3
d87a49459fec (HEAD -> nvme-6.8) nvme-auth: unexport negotiate and wait functions 07d1e5bc0664 nvme-fabrics: use post connect auth helper 1c6fad4ff587 nvme-fabrics: factor out auth code into helper
nvme (nvme-6.8) #

-----------------------------------------------------------------------
nvme (nvme-6.8) # grep NVME_AUTH .config
CONFIG_NVME_AUTH=m
nvme (nvme-6.8) #

-----------------------------------------------------------------------
nvme (nvme-6.8) # ./compile_nvme.sh
++ nproc
+ make -j 48 M=drivers/nvme/target/ clean
++ nproc
+ make -j 48 M=drivers/nvme/host/ clean
++ nproc
+ make -j 48 M=drivers/nvme/ modules

  CC [M]  drivers/nvme/target/core.o
  CC [M]  drivers/nvme/host/core.o
  CC [M]  drivers/nvme/host/ioctl.o
  CC [M]  drivers/nvme/target/configfs.o
  CC [M]  drivers/nvme/host/sysfs.o
  CC [M]  drivers/nvme/target/admin-cmd.o
  CC [M]  drivers/nvme/host/pr.o
  CC [M]  drivers/nvme/target/fabrics-cmd.o
  CC [M]  drivers/nvme/host/constants.o
  CC [M]  drivers/nvme/target/discovery.o
  CC [M]  drivers/nvme/host/trace.o
  CC [M]  drivers/nvme/target/io-cmd-file.o
  CC [M]  drivers/nvme/target/io-cmd-bdev.o
  CC [M]  drivers/nvme/host/multipath.o
  CC [M]  drivers/nvme/target/passthru.o
  CC [M]  drivers/nvme/target/zns.o
  CC [M]  drivers/nvme/target/fabrics-cmd-auth.o
  CC [M]  drivers/nvme/host/zns.o
  CC [M]  drivers/nvme/host/fault_inject.o
  CC [M]  drivers/nvme/target/auth.o
  CC [M]  drivers/nvme/host/hwmon.o
  CC [M]  drivers/nvme/target/trace.o
  CC [M]  drivers/nvme/host/pci.o
  CC [M]  drivers/nvme/host/auth.o
  CC [M]  drivers/nvme/target/rdma.o
  CC [M]  drivers/nvme/target/loop.o
  CC [M]  drivers/nvme/host/fabrics.o
  CC [M]  drivers/nvme/target/fc.o
  CC [M]  drivers/nvme/host/rdma.o
  CC [M]  drivers/nvme/target/fcloop.o
  CC [M]  drivers/nvme/target/tcp.o
  CC [M]  drivers/nvme/host/fc.o
  CC [M]  drivers/nvme/host/tcp.o
  LD [M]  drivers/nvme/target/nvme-loop.o
  LD [M]  drivers/nvme/host/nvme-fabrics.o
  LD [M]  drivers/nvme/target/nvme-fcloop.o
  LD [M]  drivers/nvme/target/nvmet.o
  LD [M]  drivers/nvme/target/nvmet-fc.o
  LD [M]  drivers/nvme/target/nvmet-rdma.o
  LD [M]  drivers/nvme/host/nvme-fc.o
  LD [M]  drivers/nvme/target/nvmet-tcp.o
  LD [M]  drivers/nvme/host/nvme.o
  LD [M]  drivers/nvme/host/nvme-rdma.o
  LD [M]  drivers/nvme/host/nvme-tcp.o
  LD [M]  drivers/nvme/host/nvme-core.o
  MODPOST drivers/nvme/Module.symvers
  CC [M]  drivers/nvme/common/nvme-auth.mod.o
  CC [M]  drivers/nvme/common/nvme-keyring.mod.o
  CC [M]  drivers/nvme/host/nvme-core.mod.o
  CC [M]  drivers/nvme/host/nvme.mod.o
  CC [M]  drivers/nvme/host/nvme-fabrics.mod.o
  CC [M]  drivers/nvme/host/nvme-rdma.mod.o
  CC [M]  drivers/nvme/host/nvme-fc.mod.o
  CC [M]  drivers/nvme/host/nvme-tcp.mod.o
  CC [M]  drivers/nvme/target/nvmet.mod.o
  CC [M]  drivers/nvme/target/nvme-loop.mod.o
  CC [M]  drivers/nvme/target/nvmet-rdma.mod.o
  CC [M]  drivers/nvme/target/nvme-fcloop.mod.o
  CC [M]  drivers/nvme/target/nvmet-fc.mod.o
  CC [M]  drivers/nvme/target/nvmet-tcp.mod.o
  LD [M]  drivers/nvme/target/nvmet.ko
  LD [M]  drivers/nvme/common/nvme-auth.ko
  LD [M]  drivers/nvme/target/nvmet-tcp.ko
  LD [M]  drivers/nvme/host/nvme-core.ko
  LD [M]  drivers/nvme/host/nvme-fc.ko
  LD [M]  drivers/nvme/host/nvme-fabrics.ko
  LD [M]  drivers/nvme/host/nvme.ko
  LD [M]  drivers/nvme/target/nvmet-fc.ko
  LD [M]  drivers/nvme/host/nvme-tcp.ko
  LD [M]  drivers/nvme/target/nvmet-rdma.ko
  LD [M]  drivers/nvme/common/nvme-keyring.ko
  LD [M]  drivers/nvme/target/nvme-fcloop.ko
  LD [M]  drivers/nvme/host/nvme-rdma.ko
  LD [M]  drivers/nvme/target/nvme-loop.ko

+ ls -lrth /lib/modules/6.8.0-rc1nvme+/kernel/drivers/nvme/host/ /lib/modules/6.8.0-rc1nvme+/kernel/drivers/nvme/target// /lib/modules/6.8.0-rc1nvme+/kernel/drivers/nvme/host/:
total 920K

-rw-r--r--. 1 root root 453K Feb  7 22:07 nvme-core.ko
-rw-r--r--. 1 root root  56K Feb  7 22:07 nvme-fabrics.ko
-rw-r--r--. 1 root root 112K Feb  7 22:07 nvme-fc.ko
-rw-r--r--. 1 root root 114K Feb  7 22:07 nvme.ko
-rw-r--r--. 1 root root  88K Feb  7 22:07 nvme-rdma.ko
-rw-r--r--. 1 root root  91K Feb  7 22:07 nvme-tcp.ko

/lib/modules/6.8.0-rc1nvme+/kernel/drivers/nvme/target//:
total 732K

-rw-r--r--. 1 root root  59K Feb  7 22:07 nvme-fcloop.ko
-rw-r--r--. 1 root root  36K Feb  7 22:07 nvme-loop.ko
-rw-r--r--. 1 root root  82K Feb  7 22:07 nvmet-fc.ko
-rw-r--r--. 1 root root 390K Feb  7 22:07 nvmet.ko
-rw-r--r--. 1 root root  83K Feb  7 22:07 nvmet-rdma.ko
-rw-r--r--. 1 root root  76K Feb  7 22:07 nvmet-tcp.ko

+ sync
nvme (nvme-6.8) #

-----------------------------------------------------------------------

blktests (master) # ./check nvme
nvme/002 (create many subsystems and test discovery) [passed]

    runtime  23.259s  ...  23.870s
nvme/003 (test if we're sending keep-alives to a discovery controller) [passed]
    runtime  11.266s  ...  11.259s
nvme/004 (test nvme and nvmet UUID NS descriptors)           [passed]
    runtime  0.486s  ...  0.490s
nvme/005 (reset local loopback target)                       [passed]
    runtime  0.814s  ...  0.831s
nvme/006 (create an NVMeOF target with a block device-backed ns) [passed]
    runtime  0.100s  ...  0.093s
nvme/007 (create an NVMeOF target with a file-backed ns)     [passed]
    runtime  0.064s  ...  0.065s
nvme/008 (create an NVMeOF host with a block device-backed ns) [passed]
    runtime  0.494s  ...  0.500s
nvme/009 (create an NVMeOF host with a file-backed ns)       [passed]
    runtime  0.478s  ...  0.480s
nvme/010 (run data verification fio job on NVMeOF block device-backed ns) [passed]
    runtime  33.407s  ...  42.649s
nvme/011 (run data verification fio job on NVMeOF file-backed ns) [passed]
    runtime  164.147s  ...  135.533s
nvme/012 (run mkfs and data verification fio job on NVMeOF block device-backed ns) [passed]
    runtime  54.561s  ...  60.786s
nvme/013 (run mkfs and data verification fio job on NVMeOF file-backed ns) [passed]
    runtime  113.872s  ...  111.774s
nvme/014 (flush a NVMeOF block device-backed ns)             [passed]
    runtime  8.090s  ...  8.491s
nvme/015 (unit test for NVMe flush for file backed ns)       [passed]
    runtime  6.528s  ...  6.853s
nvme/016 (create/delete many NVMeOF block device-backed ns and test discovery) [passed]
    runtime  12.955s  ...  13.062s
nvme/017 (create/delete many file-ns and test discovery)     [passed]
    runtime  14.219s  ...  14.426s
nvme/018 (unit test NVMe-oF out of range access on a file backend) [passed]
    runtime  0.467s  ...  0.484s
nvme/019 (test NVMe DSM Discard command on NVMeOF block-device ns) [passed]
    runtime  0.492s  ...  0.491s
nvme/020 (test NVMe DSM Discard command on NVMeOF file-backed ns) [passed]
    runtime  0.465s  ...  0.488s
nvme/021 (test NVMe list command on NVMeOF file-backed ns)   [passed]
    runtime  0.465s  ...  0.467s
nvme/022 (test NVMe reset command on NVMeOF file-backed ns)  [passed]
    runtime  0.816s  ...  0.870s
nvme/023 (test NVMe smart-log command on NVMeOF block-device ns) [passed]
    runtime  0.492s  ...  0.484s
nvme/024 (test NVMe smart-log command on NVMeOF file-backed ns) [passed]
    runtime  0.471s  ...  0.492s
nvme/025 (test NVMe effects-log command on NVMeOF file-backed ns) [passed]
    runtime  0.455s  ...  0.479s
nvme/026 (test NVMe ns-descs command on NVMeOF file-backed ns) [passed]
    runtime  0.461s  ...  0.471s
nvme/027 (test NVMe ns-rescan command on NVMeOF file-backed ns) [passed]
    runtime  0.476s  ...  0.480s
nvme/028 (test NVMe list-subsys command on NVMeOF file-backed ns) [passed]
    runtime  0.467s  ...  0.485s
nvme/029 (test userspace IO via nvme-cli read/write interface) [passed]
    runtime  0.641s  ...  0.654s
nvme/030 (ensure the discovery generation counter is updated appropriately) [passed]
    runtime  0.240s  ...  0.255s
nvme/031 (test deletion of NVMeOF controllers immediately after setup) [passed]
    runtime  4.202s  ...  4.317s
nvme/038 (test deletion of NVMeOF subsystem without enabling) [passed]
    runtime  0.019s  ...  0.018s
nvme/040 (test nvme fabrics controller reset/disconnect operation during I/O) [passed]
    runtime  7.094s  ...  7.208s
nvme/041 (Create authenticated connections)                  [passed]
    runtime    ...  1.965s
nvme/042 (Test dhchap key types for authenticated connections) [passed]
    runtime    ...  5.932s
nvme/043 (Test hash and DH group variations for authenticated connections) [passed]
    runtime    ...  35.733s
nvme/044 (Test bi-directional authentication)                [passed]
    runtime    ...  4.437s
nvme/045 (Test re-authentication)                            [passed]
    runtime    ...  1.732s

nvme/047 (test different queue types for fabric transports) [not run]
nvme_trtype=loop is not supported in this test
nvme/048 (Test queue count changes on reconnect) [not run]
nvme_trtype=loop is not supported in this test
blktests (master) #

Signature · 1 line
2.40.0
#1 lore raw

PATCH 1/3 nvme-fabrics: factor out auth code into helper

Post connect command authentication handling code is repeated into in nvmf_connect_admin_queue() and nvmf_connect_io_queue().

Add a helper to handle post connect command authentication helper. Use the same helper in nvmf_connect_admin_queue(). This also removes authentication specific code from a build where authentication feature is not configured.

---
 drivers/nvme/host/auth.c    | 32 ++++++++++++++++++++++++++++++++
 drivers/nvme/host/fabrics.c | 25 +------------------------
 drivers/nvme/host/nvme.h    |  8 ++++++++
 3 files changed, 41 insertions(+), 24 deletions(-)
drivers/nvme/host/auth.c +32 -0
index 3dce480d932e..159071462738 100644
@@ -988,6 +988,38 @@ void nvme_auth_stop(struct nvme_ctrl *ctrl)
 }
 EXPORT_SYMBOL_GPL(nvme_auth_stop);
 
+u16 nvme_auth_post_connect(struct nvme_ctrl *ctrl, u16 qid, u32 result)
+{
+	int ret;
+
+	if (!(result & (NVME_CONNECT_AUTHREQ_ATR | NVME_CONNECT_AUTHREQ_ASCR)))
+		return NVME_SC_SUCCESS;
+
+	/* Secure concatenation is not implemented */
+	if (result & NVME_CONNECT_AUTHREQ_ASCR) {
+		dev_warn(ctrl->device,
+			  "qid %u: secure concatenation is not supported\n",
+			  qid);
+		return NVME_SC_AUTH_REQUIRED;
+	}
+	/* Authentication required */
+	ret = nvme_auth_negotiate(ctrl, qid);
+	if (ret) {
+		dev_warn(ctrl->device,
+			 "qid %u: authentication setup failed\n", qid);
+		return NVME_SC_AUTH_REQUIRED;
+	}
+	ret = nvme_auth_wait(ctrl, qid);
+	if (ret) {
+		dev_warn(ctrl->device, "qid %u: authentication failed\n", qid);
+		return ret;
+	}
+	if (!qid)
+		dev_info(ctrl->device, "qid 0: authenticated\n");
+	return ret;
+}
+EXPORT_SYMBOL_GPL(nvme_auth_post_connect);
+
 void nvme_auth_free(struct nvme_ctrl *ctrl)
 {
 	int i;
drivers/nvme/host/fabrics.c +1 -24
index 373ed08e6b92..24f0d298825b 100644
@@ -460,30 +460,7 @@ int nvmf_connect_admin_queue(struct nvme_ctrl *ctrl)
 
 	result = le32_to_cpu(res.u32);
 	ctrl->cntlid = result & 0xFFFF;
-	if (result & (NVME_CONNECT_AUTHREQ_ATR | NVME_CONNECT_AUTHREQ_ASCR)) {
-		/* Secure concatenation is not implemented */
-		if (result & NVME_CONNECT_AUTHREQ_ASCR) {
-			dev_warn(ctrl->device,
-				 "qid 0: secure concatenation is not supported\n");
-			ret = NVME_SC_AUTH_REQUIRED;
-			goto out_free_data;
-		}
-		/* Authentication required */
-		ret = nvme_auth_negotiate(ctrl, 0);
-		if (ret) {
-			dev_warn(ctrl->device,
-				 "qid 0: authentication setup failed\n");
-			ret = NVME_SC_AUTH_REQUIRED;
-			goto out_free_data;
-		}
-		ret = nvme_auth_wait(ctrl, 0);
-		if (ret)
-			dev_warn(ctrl->device,
-				 "qid 0: authentication failed\n");
-		else
-			dev_info(ctrl->device,
-				 "qid 0: authenticated\n");
-	}
+	ret = nvme_auth_post_connect(ctrl, 0, result);
 out_free_data:
 	kfree(data);
 	return ret;
drivers/nvme/host/nvme.h +8 -0
index 1700063bc24d..bb1c9b74aa55 100644
@@ -1085,6 +1085,7 @@ void nvme_auth_stop(struct nvme_ctrl *ctrl);
 int nvme_auth_negotiate(struct nvme_ctrl *ctrl, int qid);
 int nvme_auth_wait(struct nvme_ctrl *ctrl, int qid);
 void nvme_auth_free(struct nvme_ctrl *ctrl);
+u16 nvme_auth_post_connect(struct nvme_ctrl *ctrl, u16 qid, u32 result);
 #else
 static inline int nvme_auth_init_ctrl(struct nvme_ctrl *ctrl)
 {
@@ -1107,6 +1108,13 @@ static inline int nvme_auth_wait(struct nvme_ctrl *ctrl, int qid)
 	return NVME_SC_AUTH_REQUIRED;
 }
 static inline void nvme_auth_free(struct nvme_ctrl *ctrl) {};
+static inline u16 nvme_auth_post_connect(struct nvme_ctrl *ctrl, u16 qid,
+		u32 result)
+{
+	if (result & (NVME_CONNECT_AUTHREQ_ATR | NVME_CONNECT_AUTHREQ_ASCR))
+		return NVME_SC_AUTH_REQUIRED;
+	return NVME_SC_SUCCESS;
+}
 #endif
 
 u32 nvme_command_effects(struct nvme_ctrl *ctrl, struct nvme_ns *ns,
Signature · 1 line
2.40.0
maintainer
#2 lore raw

Re: [PATCH 1/3] nvme-fabrics: factor out auth code into helper

Quoted 20 lines · Chaitanya Kulkarni

Post connect command authentication handling code is repeated into in nvmf_connect_admin_queue() and nvmf_connect_io_queue().

Add a helper to handle post connect command authentication helper. Use the same helper in nvmf_connect_admin_queue(). This also removes authentication specific code from a build where authentication feature is not configured.

---
  drivers/nvme/host/auth.c    | 32 ++++++++++++++++++++++++++++++++
  drivers/nvme/host/fabrics.c | 25 +------------------------
  drivers/nvme/host/nvme.h    |  8 ++++++++
  3 files changed, 41 insertions(+), 24 deletions(-)
drivers/nvme/host/auth.c +0 -0
index 3dce480d932e..159071462738 100644

drivers/nvme/host/auth.c void nvme_auth_stop(struct nvme_ctrl *ctrl) · line 996

Quoted 9 lines
drivers/nvme/host/auth.c +6 -0
@@ -988,6 +988,38 @@ void nvme_auth_stop(struct nvme_ctrl *ctrl)
  }
  EXPORT_SYMBOL_GPL(nvme_auth_stop);
 
+u16 nvme_auth_post_connect(struct nvme_ctrl *ctrl, u16 qid, u32 result)
+{
+	int ret;
+
+	if (!(result & (NVME_CONNECT_AUTHREQ_ATR | NVME_CONNECT_AUTHREQ_ASCR)))
+		return NVME_SC_SUCCESS;

I really dislike functions that may or may not do anything. I vote that we avoid as much as possible.

How about calling the function nvme_authenticate_queue() and more the above condition to the call-site?

Quoted 91 lines
drivers/nvme/host/auth.c +26 -0
+
+	/* Secure concatenation is not implemented */
+	if (result & NVME_CONNECT_AUTHREQ_ASCR) {
+		dev_warn(ctrl->device,
+			  "qid %u: secure concatenation is not supported\n",
+			  qid);
+		return NVME_SC_AUTH_REQUIRED;
+	}
+	/* Authentication required */
+	ret = nvme_auth_negotiate(ctrl, qid);
+	if (ret) {
+		dev_warn(ctrl->device,
+			 "qid %u: authentication setup failed\n", qid);
+		return NVME_SC_AUTH_REQUIRED;
+	}
+	ret = nvme_auth_wait(ctrl, qid);
+	if (ret) {
+		dev_warn(ctrl->device, "qid %u: authentication failed\n", qid);
+		return ret;
+	}
+	if (!qid)
+		dev_info(ctrl->device, "qid 0: authenticated\n");
+	return ret;
+}
+EXPORT_SYMBOL_GPL(nvme_auth_post_connect);
+
  void nvme_auth_free(struct nvme_ctrl *ctrl)
  {
  	int i;
drivers/nvme/host/fabrics.c +1 -24
index 373ed08e6b92..24f0d298825b 100644
@@ -460,30 +460,7 @@ int nvmf_connect_admin_queue(struct nvme_ctrl *ctrl)
 
  	result = le32_to_cpu(res.u32);
  	ctrl->cntlid = result & 0xFFFF;
-	if (result & (NVME_CONNECT_AUTHREQ_ATR | NVME_CONNECT_AUTHREQ_ASCR)) {
-		/* Secure concatenation is not implemented */
-		if (result & NVME_CONNECT_AUTHREQ_ASCR) {
-			dev_warn(ctrl->device,
-				 "qid 0: secure concatenation is not supported\n");
-			ret = NVME_SC_AUTH_REQUIRED;
-			goto out_free_data;
-		}
-		/* Authentication required */
-		ret = nvme_auth_negotiate(ctrl, 0);
-		if (ret) {
-			dev_warn(ctrl->device,
-				 "qid 0: authentication setup failed\n");
-			ret = NVME_SC_AUTH_REQUIRED;
-			goto out_free_data;
-		}
-		ret = nvme_auth_wait(ctrl, 0);
-		if (ret)
-			dev_warn(ctrl->device,
-				 "qid 0: authentication failed\n");
-		else
-			dev_info(ctrl->device,
-				 "qid 0: authenticated\n");
-	}
+	ret = nvme_auth_post_connect(ctrl, 0, result);
  out_free_data:
  	kfree(data);
  	return ret;
drivers/nvme/host/nvme.h +8 -0
index 1700063bc24d..bb1c9b74aa55 100644
@@ -1085,6 +1085,7 @@ void nvme_auth_stop(struct nvme_ctrl *ctrl);
  int nvme_auth_negotiate(struct nvme_ctrl *ctrl, int qid);
  int nvme_auth_wait(struct nvme_ctrl *ctrl, int qid);
  void nvme_auth_free(struct nvme_ctrl *ctrl);
+u16 nvme_auth_post_connect(struct nvme_ctrl *ctrl, u16 qid, u32 result);
  #else
  static inline int nvme_auth_init_ctrl(struct nvme_ctrl *ctrl)
  {
@@ -1107,6 +1108,13 @@ static inline int nvme_auth_wait(struct nvme_ctrl *ctrl, int qid)
  	return NVME_SC_AUTH_REQUIRED;
  }
  static inline void nvme_auth_free(struct nvme_ctrl *ctrl) {};
+static inline u16 nvme_auth_post_connect(struct nvme_ctrl *ctrl, u16 qid,
+		u32 result)
+{
+	if (result & (NVME_CONNECT_AUTHREQ_ATR | NVME_CONNECT_AUTHREQ_ASCR))
+		return NVME_SC_AUTH_REQUIRED;
+	return NVME_SC_SUCCESS;
+}
  #endif
 
  u32 nvme_command_effects(struct nvme_ctrl *ctrl, struct nvme_ns *ns,
#3 lore raw

Re: [PATCH 1/3] nvme-fabrics: factor out auth code into helper

Quoted 38 lines · Sagi Grimberg
Quoted 28 lines · Chaitanya Kulkarni

Post connect command authentication handling code is repeated into in nvmf_connect_admin_queue() and nvmf_connect_io_queue().

Add a helper to handle post connect command authentication helper. Use the same helper in nvmf_connect_admin_queue(). This also removes authentication specific code from a build where authentication feature is not configured.

---
  drivers/nvme/host/auth.c    | 32 ++++++++++++++++++++++++++++++++ drivers/nvme/host/fabrics.c | 25 +------------------------ drivers/nvme/host/nvme.h    |  8 ++++++++

  3 files changed, 41 insertions(+), 24 deletions(-)
drivers/nvme/host/auth.c +0 -0
index 3dce480d932e..159071462738 100644
@@ -988,6 +988,38 @@ void nvme_auth_stop(struct nvme_ctrl *ctrl)
   }
   EXPORT_SYMBOL_GPL(nvme_auth_stop);

  +u16 nvme_auth_post_connect(struct nvme_ctrl *ctrl, u16 qid, u32 result)

drivers/nvme/host/auth.c +4 -0
+{
+    int ret;
+
+    if (!(result & (NVME_CONNECT_AUTHREQ_ATR | 
Quoted 2 lines

NVME_CONNECT_AUTHREQ_ASCR)))
+        return NVME_SC_SUCCESS;

I really dislike functions that may or may not do anything. I vote that we avoid
as much as possible.

Quoted 3 lines

How about calling the function nvme_authenticate_queue() and more the above
condition to the call-site?

sounds good, will send v2, thanks for the comments.

-ck

maintainer Reviewed-by on v1 1/3
#4 lore raw

Re: [PATCH 1/3] nvme-fabrics: factor out auth code into helper

In reply to Chaitanya Kulkarni
Quoted 8 lines · Chaitanya Kulkarni

Post connect command authentication handling code is repeated into in nvmf_connect_admin_queue() and nvmf_connect_io_queue().

Add a helper to handle post connect command authentication helper. Use the same helper in nvmf_connect_admin_queue(). This also removes authentication specific code from a build where authentication feature is not configured.

Quoted 7 lines
---
  drivers/nvme/host/auth.c    | 32 ++++++++++++++++++++++++++++++++
  drivers/nvme/host/fabrics.c | 25 +------------------------
  drivers/nvme/host/nvme.h    |  8 ++++++++
  3 files changed, 41 insertions(+), 24 deletions(-)

Cheers,

Hannes

#5 lore raw

PATCH 2/3 nvme-fabrics: use post connect auth helper

In reply to Chaitanya Kulkarni

Use previously added helper to handle post connect command auth in nvmf_connect_io_queue().

---
 drivers/nvme/host/fabrics.c | 25 +------------------------
 1 file changed, 1 insertion(+), 24 deletions(-)
drivers/nvme/host/fabrics.c +1 -24
index 24f0d298825b..19130e3bd00a 100644
@@ -493,7 +493,6 @@ int nvmf_connect_io_queue(struct nvme_ctrl *ctrl, u16 qid)
 	struct nvmf_connect_data *data;
 	union nvme_result res;
 	int ret;
-	u32 result;
 
 	nvmf_connect_cmd_prep(ctrl, qid, &cmd);
 
@@ -508,29 +507,7 @@ int nvmf_connect_io_queue(struct nvme_ctrl *ctrl, u16 qid)
 		nvmf_log_connect_error(ctrl, ret, le32_to_cpu(res.u32),
 				       &cmd, data);
 	}
-	result = le32_to_cpu(res.u32);
-	if (result & (NVME_CONNECT_AUTHREQ_ATR | NVME_CONNECT_AUTHREQ_ASCR)) {
-		/* Secure concatenation is not implemented */
-		if (result & NVME_CONNECT_AUTHREQ_ASCR) {
-			dev_warn(ctrl->device,
-				 "qid 0: secure concatenation is not supported\n");
-			ret = NVME_SC_AUTH_REQUIRED;
-			goto out_free_data;
-		}
-		/* Authentication required */
-		ret = nvme_auth_negotiate(ctrl, qid);
-		if (ret) {
-			dev_warn(ctrl->device,
-				 "qid %d: authentication setup failed\n", qid);
-			ret = NVME_SC_AUTH_REQUIRED;
-		} else {
-			ret = nvme_auth_wait(ctrl, qid);
-			if (ret)
-				dev_warn(ctrl->device,
-					 "qid %u: authentication failed\n", qid);
-		}
-	}
-out_free_data:
+	ret = nvme_auth_post_connect(ctrl, 0, le32_to_cpu(res.u32));
 	kfree(data);
 	return ret;
 }
Signature · 1 line
2.40.0
maintainer
#6 lore raw

Re: [PATCH 2/3] nvme-fabrics: use post connect auth helper

same comment here.

maintainer
#7 lore raw

Re: [PATCH 2/3] nvme-fabrics: use post connect auth helper

In reply to Chaitanya Kulkarni
Quoted 41 lines · Chaitanya Kulkarni

Use previously added helper to handle post connect command auth in nvmf_connect_io_queue().

---
  drivers/nvme/host/fabrics.c | 25 +------------------------
  1 file changed, 1 insertion(+), 24 deletions(-)
drivers/nvme/host/fabrics.c +0 -18
index 24f0d298825b..19130e3bd00a 100644
@@ -493,7 +493,6 @@ int nvmf_connect_io_queue(struct nvme_ctrl *ctrl, u16 qid)
  	struct nvmf_connect_data *data;
  	union nvme_result res;
  	int ret;
-	u32 result;
 
  	nvmf_connect_cmd_prep(ctrl, qid, &cmd);
 
@@ -508,29 +507,7 @@ int nvmf_connect_io_queue(struct nvme_ctrl *ctrl, u16 qid)
  		nvmf_log_connect_error(ctrl, ret, le32_to_cpu(res.u32),
  				       &cmd, data);
  	}
-	result = le32_to_cpu(res.u32);
-	if (result & (NVME_CONNECT_AUTHREQ_ATR | NVME_CONNECT_AUTHREQ_ASCR)) {
-		/* Secure concatenation is not implemented */
-		if (result & NVME_CONNECT_AUTHREQ_ASCR) {
-			dev_warn(ctrl->device,
-				 "qid 0: secure concatenation is not supported\n");
-			ret = NVME_SC_AUTH_REQUIRED;
-			goto out_free_data;
-		}
-		/* Authentication required */
-		ret = nvme_auth_negotiate(ctrl, qid);
-		if (ret) {
-			dev_warn(ctrl->device,
-				 "qid %d: authentication setup failed\n", qid);
-			ret = NVME_SC_AUTH_REQUIRED;
-		} else {
-			ret = nvme_auth_wait(ctrl, qid);

drivers/nvme/host/fabrics.c int nvmf_connect_io_queue(struct nvme_ctrl *ctrl, u16 qid) · line 513

Quoted 10 lines
drivers/nvme/host/fabrics.c +1 -6
-			if (ret)
-				dev_warn(ctrl->device,
-					 "qid %u: authentication failed\n", qid);
-		}
-	}
-out_free_data:
+	ret = nvme_auth_post_connect(ctrl, 0, le32_to_cpu(res.u32));
  	kfree(data);
  	return ret;
  }

Agree with Sagi; move the first 'if' clause out of the helper:

if (result & (NVME_CONNECT_AUTHREQ_ATR | NVME_CONNECT_AUTHREQ_ASCR))

    ret = nvme_auth_post_connect(ctrl, 0, le32_to_cpu(res.u32));

Cheers,

Hannes

#8 lore raw

PATCH 3/3 nvme-auth: unexport negotiate and wait functions

In reply to Chaitanya Kulkarni

Now that post connect functionality is moved from host/fabrics.c to host/auth.c we don't need nvme_auth_wait() and nvme_auth_negotiate() to be exported from nvme authentication code, unexport them to make it private.

---
 drivers/nvme/host/auth.c |  6 ++----
 drivers/nvme/host/nvme.h | 10 ----------
 2 files changed, 2 insertions(+), 14 deletions(-)
drivers/nvme/host/auth.c +2 -4
index 159071462738..2fa8c4ee50ed 100644
@@ -852,7 +852,7 @@ static void nvme_queue_auth_work(struct work_struct *work)
 		chap->error = ret;
 }
 
-int nvme_auth_negotiate(struct nvme_ctrl *ctrl, int qid)
+static int nvme_auth_negotiate(struct nvme_ctrl *ctrl, int qid)
 {
 	struct nvme_dhchap_queue_context *chap;
 
@@ -871,9 +871,8 @@ int nvme_auth_negotiate(struct nvme_ctrl *ctrl, int qid)
 	queue_work(nvme_auth_wq, &chap->auth_work);
 	return 0;
 }
-EXPORT_SYMBOL_GPL(nvme_auth_negotiate);
 
-int nvme_auth_wait(struct nvme_ctrl *ctrl, int qid)
+static int nvme_auth_wait(struct nvme_ctrl *ctrl, int qid)
 {
 	struct nvme_dhchap_queue_context *chap;
 	int ret;
@@ -885,7 +884,6 @@ int nvme_auth_wait(struct nvme_ctrl *ctrl, int qid)
 	nvme_auth_reset_dhchap(chap);
 	return ret;
 }
-EXPORT_SYMBOL_GPL(nvme_auth_wait);
 
 static void nvme_ctrl_auth_work(struct work_struct *work)
 {
drivers/nvme/host/nvme.h +0 -10
index bb1c9b74aa55..a4d13ed8f6c3 100644
@@ -1082,8 +1082,6 @@ int __init nvme_init_auth(void);
 void __exit nvme_exit_auth(void);
 int nvme_auth_init_ctrl(struct nvme_ctrl *ctrl);
 void nvme_auth_stop(struct nvme_ctrl *ctrl);
-int nvme_auth_negotiate(struct nvme_ctrl *ctrl, int qid);
-int nvme_auth_wait(struct nvme_ctrl *ctrl, int qid);
 void nvme_auth_free(struct nvme_ctrl *ctrl);
 u16 nvme_auth_post_connect(struct nvme_ctrl *ctrl, u16 qid, u32 result);
 #else
@@ -1099,14 +1097,6 @@ static inline void __exit nvme_exit_auth(void)
 {
 }
 static inline void nvme_auth_stop(struct nvme_ctrl *ctrl) {};
-static inline int nvme_auth_negotiate(struct nvme_ctrl *ctrl, int qid)
-{
-	return -EPROTONOSUPPORT;
-}
-static inline int nvme_auth_wait(struct nvme_ctrl *ctrl, int qid)
-{
-	return NVME_SC_AUTH_REQUIRED;
-}
 static inline void nvme_auth_free(struct nvme_ctrl *ctrl) {};
 static inline u16 nvme_auth_post_connect(struct nvme_ctrl *ctrl, u16 qid,
 		u32 result)
Signature · 1 line
2.40.0
maintainer Reviewed-by on v1 3/3
#10 lore raw

Re: [PATCH 3/3] nvme-auth: unexport negotiate and wait functions

In reply to Chaitanya Kulkarni
Quoted 11 lines · Chaitanya Kulkarni

Now that post connect functionality is moved from host/fabrics.c to host/auth.c we don't need nvme_auth_wait() and nvme_auth_negotiate() to be exported from nvme authentication code, unexport them to make it private.

---
  drivers/nvme/host/auth.c |  6 ++----
  drivers/nvme/host/nvme.h | 10 ----------
  2 files changed, 2 insertions(+), 14 deletions(-)

Cheers,

Hannes

#11 lore raw
In reply to Chaitanya Kulkarni
Quoted 22 lines · Chaitanya Kulkarni

Hi,

Post connect command authentication handling code is repeated into in nvmf_connect_admin_queue() and nvmf_connect_io_queue(). Moreover this code actully belongs to authentication and should not be a part of common code.

Add a helper to handle post connect command authentication. Use the same helper in nvmf_connect_[admin|io]_queue(). This also removes authentication specific code from a build where authentication feature is not configured.

I've tested the code with and without NVME_AUTH configured with blktests they are passing. Below is a detailed log.

-ck

Chaitanya Kulkarni (3):
nvme-fabrics: factor out auth code into helper
nvme-fabrics: use post connect auth helper
nvme-auth: unexport negotiate and wait functions

Quoted 6 lines
  drivers/nvme/host/auth.c    | 38 +++++++++++++++++++++++++---
  drivers/nvme/host/fabrics.c | 50 ++-----------------------------------
  drivers/nvme/host/nvme.h    | 16 ++++++------
  3 files changed, 43 insertions(+), 61 deletions(-)

Can someone please look into this series ? this remove unnecessary code sitting in the fabrics that should be a part of authentication ...

-ck

#12 lore raw
Quoted 29 lines · Chaitanya Kulkarni
Quoted 22 lines · Chaitanya Kulkarni

Hi,

Post connect command authentication handling code is repeated into in nvmf_connect_admin_queue() and nvmf_connect_io_queue(). Moreover this code actully belongs to authentication and should not be a part of common code.

Add a helper to handle post connect command authentication. Use the same helper in nvmf_connect_[admin|io]_queue(). This also removes authentication specific code from a build where authentication feature is not configured.

I've tested the code with and without NVME_AUTH configured with blktests they are passing. Below is a detailed log.

-ck

Chaitanya Kulkarni (3):
nvme-fabrics: factor out auth code into helper
nvme-fabrics: use post connect auth helper
nvme-auth: unexport negotiate and wait functions

Quoted 6 lines
   drivers/nvme/host/auth.c    | 38 +++++++++++++++++++++++++---
   drivers/nvme/host/fabrics.c | 50 ++-----------------------------------
   drivers/nvme/host/nvme.h    | 16 ++++++------
   3 files changed, 43 insertions(+), 61 deletions(-)
Quoted 6 lines

Can someone please look into this series ? this remove unnecessary code sitting in the fabrics that should be a part of authentication ...

-ck

gentle ping, can I get some feedback if this is not needed for any reason ?

-ck