I/O error propagation
Hi,
I have a question on how disk errors get propagated to the file systems.
Quoted 1 line
From looking at the SCSI/IDE drivers, it looks like there
could be many reasons for an I/O to fail. It could be bus timeout, media errors, and so on.
Does all these errors get reported to the file system ? It looks like all the different types of errors get turned into a single I/O error (-EIO) and passed on to the file system.
Or is there a way where we can export better error codes to the file system ?
Any idea/input regarding this is greatly appreciated.
Thanks.
Quoted 14 lines · V P
Hi,
I have a question on how disk errors get propagated to the file systems.
Quoted 1 line
From looking at the SCSI/IDE drivers, it looks like there
could be many reasons for an I/O to fail. It could be bus timeout, media errors, and so on.
Does all these errors get reported to the file system ? It looks like all the different types of errors get turned into a single I/O error (
-EIO) and passed on to the file system.
Quoted 6 lines
Or is there a way where we can export better error codes to the file system ?
Any idea/input regarding this is greatly appreciated.
Thanks.
It depends upon the disk devices, i.e., IDE SCSI, etc., but in general all errors reported by the hardware result in retrying the operation. If the retry fails after several (device dependent) attempts, the actual error is reported as a kernel message. These errors can be retrieved using the dmesg command and they will usually be retained in some kernel log in /var/log (actual log-name is vendor dependent).
Following the Unix convention, any errors reported back upstream, eventually to the user, get reported ONLY as something defined in /usr/include/errno.h (which includes others, ultimately /usr/asm/errno.h).
So, you don't need to reinvent anything. If you have hardware errors they will be reported in /var/log/messages (or whatever) and if you are making a new driver, you are expected to comply with the same protocol.
Cheers,
Dick Johnson
Penguin : Linux version 2.6.10 on an i686 machine (5537.79 BogoMips).
Notice : All mail here is now cached for review by Dictator Bush.
98.36% of all statistics are fiction.
I agree.
But what if the file systems can handle certain errors better than what the drivers can do now ? Take for e.g., data corruption. If the driver finds a corrupted sector that it cannot recover, it is going to convert this specific error in to a more generic error code (-EIO) and report it to the file system, But the file system might find it is ok to have a block of data with few corrupted bytes (say, if the block belongs to a large video file) rather than receive an I/O error code with no data at all.
What I'm thinking is this: do we have to export richer error codes to the filesystem from the driver and let the file system handle them as it thinks appropriate ?
thanks,
Quoted 47 lines · linux-os
Quoted 14 lines · V P
Hi,
I have a question on how disk errors get propagated to the file systems.
Quoted 1 line
From looking at the SCSI/IDE drivers, it looks like there
could be many reasons for an I/O to fail. It could be bus timeout, media errors, and so on.
Does all these errors get reported to the file system ? It looks like all the different types of errors get turned into a single I/O error (
-EIO) and passed on to the file system.Quoted 6 lines
Or is there a way where we can export better error codes to the file system ?
Any idea/input regarding this is greatly appreciated.
Thanks.
It depends upon the disk devices, i.e., IDE SCSI, etc., but in general all errors reported by the hardware result in retrying the operation. If the retry fails after several (device dependent) attempts, the actual error is reported as a kernel message. These errors can be retrieved using the
dmesgcommand and they will usually be retained in some kernel log in/var/log(actual log-name is vendor dependent).Following the Unix convention, any errors reported back upstream, eventually to the user, get reported ONLY as something defined in
/usr/include/errno.h(which includes others, ultimately/usr/asm/errno.h).So, you don't need to reinvent anything. If you have hardware errors they will be reported in
/var/log/messages(or whatever) and if you are making a new driver, you are expected to comply with the same protocol.Cheers,
Dick Johnson
Penguin : Linux version 2.6.10 on an i686 machine (5537.79 BogoMips).
Notice : All mail here is now cached for review by Dictator Bush.
98.36% of all statistics are fiction.