soc: qcom: pdr: Fixup array type of get_domain_list_resp message
Subsystems (3)
PATCH 1/1 soc: qcom: pdr: Fixup array type of get_domain_list_resp message
The array type of get_domain_list_resp is incorrectly marked as NO_ARRAY. Due to which the following error was observed when using pdr helpers with the downstream proprietary pd-mapper. Fix this up by marking it as VAR_LEN_ARRAY instead.
Err logs:qmi_decode_struct_elem: Fault in decoding: dl(2), db(27), tl(160), i(1), el(1) failed to decode incoming message
PDR: tms/servreg get domain list txn wait failed: -14
PDR: service lookup for tms/servreg failed: -14
--- drivers/soc/qcom/pdr_internal.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/soc/qcom/pdr_internal.h +1 -1
@@ -185,7 +185,7 @@ struct qmi_elem_info servreg_get_domain_list_resp_ei[] = { .data_type = QMI_STRUCT, .elem_len = SERVREG_DOMAIN_LIST_LENGTH, .elem_size = sizeof(struct servreg_location_entry), - .array_type = NO_ARRAY, + .array_type = VAR_LEN_ARRAY, .tlv_type = 0x12, .offset = offsetof(struct servreg_get_domain_list_resp , domain_list),
Signature · 2 lines
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project
Quoted 31 lines · Sibi Sankar
The array type of
get_domain_list_respis incorrectly marked asNO_ARRAY. Due to which the following error was observed when using pdr helpers with the downstream proprietary pd-mapper. Fix this up by marking it asVAR_LEN_ARRAYinstead.Err logs:
qmi_decode_struct_elem: Fault in decoding: dl(2), db(27), tl(160), i(1), el(1) failed to decode incoming message
PDR: tms/servreg get domain list txn wait failed: -14
PDR: service lookup for tms/servreg failed: -14Fixes fbe639b44a82 ("soc: qcom: Introduce Protection Domain Restart helpers")Reported-by Rishabh Bhatnagar <[email protected]>Signed-off-by Sibi Sankar <[email protected]>--- drivers/soc/qcom/pdr_internal.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)drivers/soc/qcom/pdr_internal.h +1
-1@@ -185,7 +185,7 @@ struct qmi_elem_info servreg_get_domain_list_resp_ei[] = { .data_type =QMI_STRUCT , .elem_len =SERVREG_DOMAIN_LIST_LENGTH , .elem_size =sizeof (struct servreg_location_entry ), - .array_type =NO_ARRAY , + .array_type =VAR_LEN_ARRAY , .tlv_type =0x12 , .offset = offsetof(struct servreg_get_domain_list_resp,
Quoted 1 line
domain_list),