Skip to contentSkip to conversation

newbiew required some help

LARTC Anil Thapa 3 participants 3 messages Aug 2, 2007 – Aug 31, 2007

lore
Share & tools
lore

Anil Thapa

author
#0 lore raw

Hello all,

Perhaps this is very easy but i have no idea how to do this. Anyway I have two linux servers (Redhat ent5) with 1gps switch. How can i monitor the bandwidth uses between them? Or are there any tool that i can use to observe this ? i understand if it were a managable switch then it might be possible. In this case this 1Gbps is unmanage switch.

Any idea or suggestion woul be helpful.

\\AT

_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc

#1 lore raw

May Be Bandwidthd Could be of help.Google for it.As i don't remember it's exact location on the net.

Quoted 14 lines · Anil Thapa

Hello all,

Perhaps this is very easy but i have no idea how to do this. Anyway I have two linux servers (Redhat ent5) with 1gps switch. How can i monitor the bandwidth uses between them? Or are there any tool that i can use to observe
this ? i understand if it were a managable switch then it might be possible.
In this case this 1Gbps is unmanage switch.

Any idea or suggestion woul be helpful.

Quoted 7 lines

\\AT

_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc

_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc

#2 lore raw
In reply to Anil Thapa
Quoted 11 lines · Anil Thapa

Hello all,

Perhaps this is very easy but i have no idea how to do this. Anyway I have two linux servers (Redhat ent5) with 1gps switch. How can i monitor the bandwidth uses between them? Or are there any tool that i can use to observe
this ? i understand if it were a managable switch then it might be possible.
In this case this 1Gbps is unmanage switch.

Quoted 1 line

Any idea or suggestion woul be helpful.

Install SNMP and MRTG does the job

ram

_______________________________________________
LARTC mailing list
[email protected]
http://mailman.ds9a.nl/cgi-bin/mailman/listinfo/lartc