Skip to contentSkip to conversation

Bluetooth: hci_sync: Fix UAF in hci_disconnect_all_sync

PATCH Superseded Luiz Augusto von Dentz 3 participants 3 messages Aug 11, 2023 – Aug 12, 2023

Subsystems (2)

v3 of 4 Superseded Latest is v4 →

lore
Share & tools
lore

Luiz Augusto von Dentz

author maintainer
#0 lore raw

PATCH v3 1/1 Bluetooth: hci_sync: Fix UAF in hci_disconnect_all_sync

From: Luiz Augusto von Dentz <[email protected]>

Use-after-free can occur in hci_disconnect_all_sync if a connection is deleted by concurrent processing of a controller event.

To prevent this the code now tries to iterate over the list backwards to ensure the links are cleanup before its parents, also it no longer relies on a cursor, instead it always uses the last element since hci_abort_conn_sync is guaranteed to call hci_conn_del.

UAF crash log:
==================================================================

BUG: KASAN: slab-use-after-free in hci_set_powered_sync
(net/bluetooth/hci_sync.c:5424) [bluetooth]
Read of size 8 at addr ffff888009d9c000 by task kworker/u9:0/124

CPU: 0 PID: 124 Comm: kworker/u9:0 Tainted: G        W
6.5.0-rc1+ #10
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS
1.16.2-1.fc38 04/01/2014
Workqueue: hci0 hci_cmd_sync_work [bluetooth]
Call Trace:
 <TASK>
 dump_stack_lvl+0x5b/0x90
 print_report+0xcf/0x670
 ? __virt_addr_valid+0xdd/0x160
 ? hci_set_powered_sync+0x2c9/0x4a0 [bluetooth]
 kasan_report+0xa6/0xe0
 ? hci_set_powered_sync+0x2c9/0x4a0 [bluetooth]
 ? __pfx_set_powered_sync+0x10/0x10 [bluetooth]
 hci_set_powered_sync+0x2c9/0x4a0 [bluetooth]
 ? __pfx_hci_set_powered_sync+0x10/0x10 [bluetooth]
 ? __pfx_lock_release+0x10/0x10
 ? __pfx_set_powered_sync+0x10/0x10 [bluetooth]
 hci_cmd_sync_work+0x137/0x220 [bluetooth]
 process_one_work+0x526/0x9d0
 ? __pfx_process_one_work+0x10/0x10
 ? __pfx_do_raw_spin_lock+0x10/0x10
 ? mark_held_locks+0x1a/0x90
 worker_thread+0x92/0x630
 ? __pfx_worker_thread+0x10/0x10
 kthread+0x196/0x1e0
 ? __pfx_kthread+0x10/0x10
 ret_from_fork+0x2c/0x50
 </TASK>

Allocated by task 1782:
 kasan_save_stack+0x33/0x60
 kasan_set_track+0x25/0x30
 __kasan_kmalloc+0x8f/0xa0
 hci_conn_add+0xa5/0xa80 [bluetooth]
 hci_bind_cis+0x881/0x9b0 [bluetooth]
 iso_connect_cis+0x121/0x520 [bluetooth]
 iso_sock_connect+0x3f6/0x790 [bluetooth]
 __sys_connect+0x109/0x130
 __x64_sys_connect+0x40/0x50
 do_syscall_64+0x60/0x90
 entry_SYSCALL_64_after_hwframe+0x6e/0xd8

Freed by task 695:
 kasan_save_stack+0x33/0x60
 kasan_set_track+0x25/0x30
 kasan_save_free_info+0x2b/0x50
 __kasan_slab_free+0x10a/0x180
 __kmem_cache_free+0x14d/0x2e0
 device_release+0x5d/0xf0
 kobject_put+0xdf/0x270
 hci_disconn_complete_evt+0x274/0x3a0 [bluetooth]
 hci_event_packet+0x579/0x7e0 [bluetooth]
 hci_rx_work+0x287/0xaa0 [bluetooth]
 process_one_work+0x526/0x9d0
 worker_thread+0x92/0x630
 kthread+0x196/0x1e0
 ret_from_fork+0x2c/0x50
==================================================================
Fixes 182ee45da083 ("Bluetooth: hci_sync: Rework hci_suspend_notifier")
---
 net/bluetooth/hci_sync.c | 51 ++++++++++++++++++++++++----------------
 1 file changed, 31 insertions(+), 20 deletions(-)
net/bluetooth/hci_sync.c +31 -20
index 5eb30ba21370..86e18e09136e 100644
@@ -5370,6 +5370,7 @@ int hci_abort_conn_sync(struct hci_dev *hdev, struct hci_conn *conn, u8 reason)
 {
 	int err = 0;
 	u16 handle = conn->handle;
+	struct hci_conn *c;
 
 	switch (conn->state) {
 	case BT_CONNECTED:
@@ -5389,43 +5390,53 @@ int hci_abort_conn_sync(struct hci_dev *hdev, struct hci_conn *conn, u8 reason)
 		hci_dev_unlock(hdev);
 		return 0;
 	default:
+		hci_dev_lock(hdev);
 		conn->state = BT_CLOSED;
+		hci_disconn_cfm(conn, reason);
+		hci_conn_del(conn);
+		hci_dev_unlock(hdev);
 		return 0;
 	}
 
+	/* Check if the connection hasn't been cleanup while waiting
+	 * commands to complete.
+	 */
+	c = hci_conn_hash_lookup_handle(hdev, handle);
+	if (!c || c != conn)
+		return 0;
+
 	/* Cleanup hci_conn object if it cannot be cancelled as it
 	 * likelly means the controller and host stack are out of sync
 	 * or in case of LE it was still scanning so it can be cleanup
 	 * safely.
 	 */
-	if (err) {
-		struct hci_conn *c;
-
-		/* Check if the connection hasn't been cleanup while waiting
-		 * commands to complete.
-		 */
-		c = hci_conn_hash_lookup_handle(hdev, handle);
-		if (!c || c != conn)
-			return 0;
-
-		hci_dev_lock(hdev);
-		hci_conn_failed(conn, err);
-		hci_dev_unlock(hdev);
-	}
+	hci_dev_lock(hdev);
+	hci_conn_failed(conn, reason);
+	hci_dev_unlock(hdev);
 
 	return err;
 }
 
 static int hci_disconnect_all_sync(struct hci_dev *hdev, u8 reason)
 {
-	struct hci_conn *conn, *tmp;
-	int err;
+	struct list_head *head = &hdev->conn_hash.list;
+	struct hci_conn *conn;
 
-	list_for_each_entry_safe(conn, tmp, &hdev->conn_hash.list, list) {
-		err = hci_abort_conn_sync(hdev, conn, reason);
-		if (err)
-			return err;
+	rcu_read_lock();
+	while ((conn = list_first_or_null_rcu(head, struct hci_conn, list))) {
+		/* Make sure the connection is not freed while unlocking */
+		conn = hci_conn_get(conn);
+		rcu_read_unlock();
+		/* Disregard possible errors since hci_conn_del shall have been
+		 * called even in case of errors had occurred since it would
+		 * then cause hci_conn_failed to be called which calls
+		 * hci_conn_del internally.
+		 */
+		hci_abort_conn_sync(hdev, conn, reason);
+		hci_conn_put(conn);
+		rcu_read_lock();
 	}
+	rcu_read_unlock();
 
 	return 0;
 }
Signature · 1 line
2.41.0
#1 lore raw

This is automated email and please do not reply to this email!

Dear submitter,

Thank you for submitting the patches to the linux bluetooth mailing list. This is a CI test results with your patch series:
PW Link:https://patchwork.kernel.org/project/bluetooth/list/?series=775536

---Test result---

Test Summary:

CheckPatch                    PASS      0.77 seconds
GitLint                       PASS      0.32 seconds
SubjectPrefix                 PASS      0.11 seconds
BuildKernel                   PASS      38.70 seconds
CheckAllWarning               PASS      42.94 seconds
CheckSparse                   PASS      49.10 seconds
CheckSmatch                   PASS      132.56 seconds
BuildKernel32                 PASS      37.95 seconds
TestRunnerSetup               PASS      580.39 seconds
TestRunner_l2cap-tester       PASS      33.28 seconds
TestRunner_iso-tester         PASS      65.22 seconds
TestRunner_bnep-tester        PASS      13.54 seconds
TestRunner_mgmt-tester        FAIL      263.32 seconds
TestRunner_rfcomm-tester      PASS      20.26 seconds
TestRunner_sco-tester         PASS      22.74 seconds
TestRunner_ioctl-tester       PASS      22.66 seconds
TestRunner_mesh-tester        PASS      16.88 seconds
TestRunner_smp-tester         PASS      18.08 seconds
TestRunner_userchan-tester    PASS      14.55 seconds
IncrementalBuild              PASS      35.85 seconds

Details
##############################
Test: TestRunner_mgmt-tester - FAIL
Desc: Run mgmt-tester with test-runner Output:
Total: 497, Passed: 495 (99.6%), Failed: 2, Not Run: 0

Failed Test Cases

LL Privacy - Unpair 1                                Timed out    1.888 seconds
LL Privacy - Unpair 2 (Remove from AL)               Timed out    4.983 seconds

---
Regards,
Linux Bluetooth

#2 lore raw
In reply to Luiz Augusto von Dentz

Hi Luiz,

pe, 2023-08-11 kello 16:16 -0700, Luiz Augusto von Dentz kirjoitti:

Quoted 126 lines

From: Luiz Augusto von Dentz <[email protected]>

Use-after-free can occur in hci_disconnect_all_sync if a connection is deleted by concurrent processing of a controller event.

To prevent this the code now tries to iterate over the list backwards to ensure the links are cleanup before its parents, also it no longer relies on a cursor, instead it always uses the last element since hci_abort_conn_sync is guaranteed to call hci_conn_del.

UAF crash log:
==================================================================

BUG: KASAN: slab-use-after-free in hci_set_powered_sync
(net/bluetooth/hci_sync.c:5424) [bluetooth]
Read of size 8 at addr ffff888009d9c000 by task kworker/u9:0/124

CPU: 0 PID: 124 Comm: kworker/u9:0 Tainted: G        W
6.5.0-rc1+ #10
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS
1.16.2-1.fc38 04/01/2014
Workqueue: hci0 hci_cmd_sync_work [bluetooth]
Call Trace:
 <TASK>
 dump_stack_lvl+0x5b/0x90
 print_report+0xcf/0x670
 ? __virt_addr_valid+0xdd/0x160
 ? hci_set_powered_sync+0x2c9/0x4a0 [bluetooth]
 kasan_report+0xa6/0xe0
 ? hci_set_powered_sync+0x2c9/0x4a0 [bluetooth]
 ? __pfx_set_powered_sync+0x10/0x10 [bluetooth]
 hci_set_powered_sync+0x2c9/0x4a0 [bluetooth]
 ? __pfx_hci_set_powered_sync+0x10/0x10 [bluetooth]
 ? __pfx_lock_release+0x10/0x10
 ? __pfx_set_powered_sync+0x10/0x10 [bluetooth]
 hci_cmd_sync_work+0x137/0x220 [bluetooth]
 process_one_work+0x526/0x9d0
 ? __pfx_process_one_work+0x10/0x10
 ? __pfx_do_raw_spin_lock+0x10/0x10
 ? mark_held_locks+0x1a/0x90
 worker_thread+0x92/0x630
 ? __pfx_worker_thread+0x10/0x10
 kthread+0x196/0x1e0
 ? __pfx_kthread+0x10/0x10
 ret_from_fork+0x2c/0x50
 </TASK>

Allocated by task 1782:
 kasan_save_stack+0x33/0x60
 kasan_set_track+0x25/0x30
 __kasan_kmalloc+0x8f/0xa0
 hci_conn_add+0xa5/0xa80 [bluetooth]
 hci_bind_cis+0x881/0x9b0 [bluetooth]
 iso_connect_cis+0x121/0x520 [bluetooth]
 iso_sock_connect+0x3f6/0x790 [bluetooth]
 __sys_connect+0x109/0x130
 __x64_sys_connect+0x40/0x50
 do_syscall_64+0x60/0x90
 entry_SYSCALL_64_after_hwframe+0x6e/0xd8

Freed by task 695:
 kasan_save_stack+0x33/0x60
 kasan_set_track+0x25/0x30
 kasan_save_free_info+0x2b/0x50
 __kasan_slab_free+0x10a/0x180
 __kmem_cache_free+0x14d/0x2e0
 device_release+0x5d/0xf0
 kobject_put+0xdf/0x270
 hci_disconn_complete_evt+0x274/0x3a0 [bluetooth]
 hci_event_packet+0x579/0x7e0 [bluetooth]
 hci_rx_work+0x287/0xaa0 [bluetooth]
 process_one_work+0x526/0x9d0
 worker_thread+0x92/0x630
 kthread+0x196/0x1e0
 ret_from_fork+0x2c/0x50
==================================================================
Fixes 182ee45da083 ("Bluetooth: hci_sync: Rework hci_suspend_notifier")
---
 net/bluetooth/hci_sync.c | 51 ++++++++++++++++++++++++----------------
 1 file changed, 31 insertions(+), 20 deletions(-)
net/bluetooth/hci_sync.c +12 -7
index 5eb30ba21370..86e18e09136e 100644
@@ -5370,6 +5370,7 @@ int hci_abort_conn_sync(struct hci_dev *hdev, struct hci_conn *conn, u8 reason)
 {
 	int err = 0;
 	u16 handle = conn->handle;
+	struct hci_conn *c;
 
 	switch (conn->state) {
 	case BT_CONNECTED:
@@ -5389,43 +5390,53 @@ int hci_abort_conn_sync(struct hci_dev *hdev, struct hci_conn *conn, u8 reason)
 		hci_dev_unlock(hdev);
 		return 0;
 	default:
+		hci_dev_lock(hdev);
 		conn->state = BT_CLOSED;
+		hci_disconn_cfm(conn, reason);
+		hci_conn_del(conn);
+		hci_dev_unlock(hdev);
 		return 0;
 	}
 
+	/* Check if the connection hasn't been cleanup while waiting
+	 * commands to complete.
+	 */
+	c = hci_conn_hash_lookup_handle(hdev, handle);
+	if (!c || c != conn)
+		return 0;
+
 	/* Cleanup hci_conn object if it cannot be cancelled as it
 	 * likelly means the controller and host stack are out of sync
 	 * or in case of LE it was still scanning so it can be cleanup
 	 * safely.
 	 */
-	if (err) {
-		struct hci_conn *c;
-
-		/* Check if the connection hasn't been cleanup while waiting
-		 * commands to complete.
-		 */
-		c = hci_conn_hash_lookup_handle(hdev, handle);

net/bluetooth/hci_sync.c int hci_abort_conn_sync(struct hci_dev *hdev, struct hci_conn *conn, u8 reason) · line 5415

Quoted 10 lines
net/bluetooth/hci_sync.c +3 -7
-		if (!c || c != conn)
-			return 0;
-
-		hci_dev_lock(hdev);
-		hci_conn_failed(conn, err);
-		hci_dev_unlock(hdev);
-	}
+	hci_dev_lock(hdev);
+	hci_conn_failed(conn, reason);
+	hci_dev_unlock(hdev);

To me it seems there is a theoretical race here:

task 1 in hci_conn_abort_sync
task 2 in hci_disconn_complete_evt
task 1: c = hci_conn_hash_lookup_handle(conn->handle) task 2: hci_dev_lock(hdev)
task 1: hci_dev_lock(hdev) /* waits here */
task 2: hci_conn_del(conn) /* conn deleted the first time */
task 2: hci_dev_unlock(hdev)
task 1: hci_conn_failed(conn, err) /* conn deleted again */

Moving hci_dev_lock before hci_conn_hash_lookup_handle avoids this.

Another related theoretical race seems to be in e.g. hci_acl/sco/isodata_packet which do

	hci_dev_lock(hdev);
	conn = hci_conn_hash_lookup_handle(hdev, handle);
	hci_dev_unlock(hdev);
	if (conn)
		do_stuff_without_lock(conn);

These tasks run in hdev->workqueue, so it seems like deletion of conn in hdev->req_workqueue like in hci_conn_abort_sync here could in theory occur while do_stuff_without_lock is still accessing conn.

I guess in reality it depends on whether the two workqueues are really running the tasks on different CPU at the same time, and if one can hit narrow time windows.

Quoted 33 lines
net/bluetooth/hci_sync.c +16 -6
 	return err;
 }
 
 static int hci_disconnect_all_sync(struct hci_dev *hdev, u8 reason)
 {
-	struct hci_conn *conn, *tmp;
-	int err;
+	struct list_head *head = &hdev->conn_hash.list;
+	struct hci_conn *conn;
 
-	list_for_each_entry_safe(conn, tmp, &hdev->conn_hash.list, list) {
-		err = hci_abort_conn_sync(hdev, conn, reason);
-		if (err)
-			return err;
+	rcu_read_lock();
+	while ((conn = list_first_or_null_rcu(head, struct hci_conn, list))) {
+		/* Make sure the connection is not freed while unlocking */
+		conn = hci_conn_get(conn);
+		rcu_read_unlock();
+		/* Disregard possible errors since hci_conn_del shall have been
+		 * called even in case of errors had occurred since it would
+		 * then cause hci_conn_failed to be called which calls
+		 * hci_conn_del internally.
+		 */
+		hci_abort_conn_sync(hdev, conn, reason);
+		hci_conn_put(conn);
+		rcu_read_lock();
 	}
+	rcu_read_unlock();
 
 	return 0;
 }