soc: ti: add k3 platforms chipid module driver
Subsystems (2)
v4 cover soc: ti: add k3 platforms chipid module driver
Hi All,
This series introduces TI K3 Multicore SoC platforms chipid module driver which provides identification support of the TI K3 SoCs (family, revision) and register this information with the SoC bus. It is available under /sys/devices/soc0/ for user space, and can be checked, where needed, in Kernel using soc_device_match().
It is also required for introducing support for new revisions of K3 AM65x/J721E SoCs.
Example J721E:
# cat /sys/devices/soc0/{machine,family,revision}
Texas Instruments K3 J721E SoC
J721E
SR1.0Example AM65x:
# cat /sys/devices/soc0/{machine,family,revision}
Texas Instruments AM654 Base Board
AM65X
SR1.0Changes in v4:
- convert to platform_driver as suggested by Arnd Bergmann <[email protected]>
Changes in v3:
- add handling of kasprintf() fail
Changes in v2:
- pr_debug() replaced with pr_info() to show SoC info on init
- minor format change
- split series on driver and platform changes
- add Reviewed-by: Lokesh Vutla <[email protected]>
v3: https://lkml.org/lkml/2020/5/8/357
v2: https://lkml.org/lkml/2020/5/5/1193
v1: https://lwn.net/Articles/818577/
Grygorii Strashko (2):
dt-bindings: soc: ti: add binding for k3 platforms chipid module
soc: ti: add k3 platforms chipid module driver
.../bindings/soc/ti/k3-socinfo.yaml | 40 +++++ drivers/soc/ti/Kconfig | 10 ++ drivers/soc/ti/Makefile | 1 + drivers/soc/ti/k3-socinfo.c | 152 ++++++++++++++++++ 4 files changed, 203 insertions(+) create mode 100644 Documentation/devicetree/bindings/soc/ti/k3-socinfo.yaml create mode 100644 drivers/soc/ti/k3-socinfo.c
Signature · 1 line
2.17.1
PATCH v4 1/2 dt-bindings: soc: ti: add binding for k3 platforms chipid module
Add DT binding for Texas Instruments K3 Multicore SoC platforms chipid module which is represented by CTRLMMR_xxx_JTAGID register and contains information about SoC id and revision.
--- .../bindings/soc/ti/k3-socinfo.yaml | 40 +++++++++++++++++++ 1 file changed, 40 insertions(+) create mode 100644 Documentation/devicetree/bindings/soc/ti/k3-socinfo.yaml
Documentation/devicetree/bindings/soc/ti/k3-socinfo.yaml new file +40 -0
@@ -0,0 +1,40 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/ti/k3-socinfo.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments K3 Multicore SoC platforms chipid module + +maintainers: + - Tero Kristo <[email protected]> + - Nishanth Menon <[email protected]> + +description: | + Texas Instruments (ARM64) K3 Multicore SoC platforms chipid module is + represented by CTRLMMR_xxx_JTAGID register which contains information about + SoC id and revision. + +properties: + $nodename: + pattern: "^chipid@[0-9a-f]+$" + + compatible: + items: + - const: ti,am654-chipid + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + chipid@43000014 { + compatible = "ti,am654-chipid"; + reg = <0x43000014 0x4>; + };
Signature · 1 line
2.17.1
Re: [PATCH v4 1/2] dt-bindings: soc: ti: add binding for k3 platforms chipid module
Quoted 4 lines · Grygorii Strashko
Add DT binding for Texas Instruments K3 Multicore SoC platforms chipid module which is represented by
CTRLMMR_xxx_JTAGIDregister and contains information about SoC id and revision.
Quoted 8 lines
Signed-off-by Grygorii Strashko <[email protected]>Reviewed-by Lokesh Vutla <[email protected]>Reviewed-by Tero Kristo <[email protected]>--- .../bindings/soc/ti/k3-socinfo.yaml | 40 +++++++++++++++++++ 1 file changed, 40 insertions(+) create mode 100644 Documentation/devicetree/bindings/soc/ti/k3-socinfo.yaml
PATCH v4 2/2 soc: ti: add k3 platforms chipid module driver
In reply to Grygorii StrashkoThe Texas Instruments K3 Multicore SoC platforms have chipid module which is represented by CTRLMMR_xxx_JTAGID register and contains information about SoC id and revision.
Bits:
31-28 VARIANT Device variant
27-12 PARTNO Part number 11-1 MFG Indicates TI as manufacturer (0x17) 1 Always 1
This patch adds corresponding driver to identify the TI K3 SoC family and revision, and registers this information with the SoC bus. It is available under /sys/devices/soc0/ for user space, and can be checked, where needed, in Kernel using soc_device_match().
Identification is done by:
- checking MFG to be TI ID
- retrieving Device variant (revision)
- retrieving Part number and convert it to the family
- retrieving machine from DT "/model"
Example J721E:
# cat /sys/devices/soc0/{machine,family,revision}
Texas Instruments K3 J721E SoC
J721E
SR1.0Example AM65x:
# cat /sys/devices/soc0/{machine,family,revision}
Texas Instruments AM654 Base Board
AM65X
SR1.0--- drivers/soc/ti/Kconfig | 10 +++ drivers/soc/ti/Makefile | 1 + drivers/soc/ti/k3-socinfo.c | 152 ++++++++++++++++++++++++++++++++++++ 3 files changed, 163 insertions(+) create mode 100644 drivers/soc/ti/k3-socinfo.c
drivers/soc/ti/Kconfig +10 -0
@@ -91,6 +91,16 @@ config TI_K3_RINGACC and a consumer. There is one RINGACC module per NAVSS on TI AM65x SoCs If unsure, say N. +config TI_K3_SOCINFO + bool + depends on ARCH_K3 || COMPILE_TEST + select SOC_BUS + select MFD_SYSCON + help + Include support for the SoC bus socinfo for the TI K3 Multicore SoC + platforms to provide information about the SoC family and + variant to user space. + endif # SOC_TI config TI_SCI_INTA_MSI_DOMAIN
drivers/soc/ti/Makefile +1 -0
@@ -11,3 +11,4 @@ obj-$(CONFIG_WKUP_M3_IPC) += wkup_m3_ipc.o obj-$(CONFIG_TI_SCI_PM_DOMAINS) += ti_sci_pm_domains.o obj-$(CONFIG_TI_SCI_INTA_MSI_DOMAIN) += ti_sci_inta_msi.o obj-$(CONFIG_TI_K3_RINGACC) += k3-ringacc.o +obj-$(CONFIG_TI_K3_SOCINFO) += k3-socinfo.o
drivers/soc/ti/k3-socinfo.c new file +152 -0
152 lines not on this page · raw message
Signature · 1 line
2.17.1
Hi Santosh,
Quoted 42 lines · Grygorii Strashko
Hi All,
This series introduces TI K3 Multicore SoC platforms chipid module driver which provides identification support of the TI K3 SoCs (family, revision) and register this information with the SoC bus. It is available under
/sys/devices/soc0/for user space, and can be checked, where needed, in Kernel usingsoc_device_match().
It is also required for introducing support for new revisions of K3 AM65x/J721E SoCs.Example J721E:
# cat /sys/devices/soc0/{machine,family,revision} Texas Instruments K3 J721E SoC J721E SR1.0Example AM65x:
# cat /sys/devices/soc0/{machine,family,revision} Texas Instruments AM654 Base Board AM65X SR1.0Changes in v4:
- convert toplatform_driveras suggested by Arnd Bergmann <[email protected]>Changes in v3:
- add handling ofkasprintf()failChanges in v2:
-pr_debug()replaced withpr_info()to show SoC info on init
- minor format change
- split series on driver and platform changes
- add Reviewed-by: Lokesh Vutla <[email protected]>v3: https://lkml.org/lkml/2020/5/8/357
v2: https://lkml.org/lkml/2020/5/5/1193
v1: https://lwn.net/Articles/818577/Grygorii Strashko (2):
dt-bindings: soc: ti: add binding for k3 platforms chipid module
soc: ti: add k3 platforms chipid module driver
Quoted 8 lines
.../bindings/soc/ti/k3-socinfo.yaml | 40 +++++ drivers/soc/ti/Kconfig | 10 ++ drivers/soc/ti/Makefile | 1 + drivers/soc/ti/k3-socinfo.c | 152 ++++++++++++++++++ 4 files changed, 203 insertions(+)create mode 100644
Documentation/devicetree/bindings/soc/ti/k3-socinfo.yamlcreate mode 100644drivers/soc/ti/k3-socinfo.c
Any chances you can pick this up?
Signature · 2 lines
Best regards, grygorii
Arnd Bergmann
AppliedQuoted 11 lines · Grygorii Strashko
Quoted 8 lines · Grygorii Strashko
.../bindings/soc/ti/k3-socinfo.yaml | 40 +++++ drivers/soc/ti/Kconfig | 10 ++ drivers/soc/ti/Makefile | 1 + drivers/soc/ti/k3-socinfo.c | 152 ++++++++++++++++++ 4 files changed, 203 insertions(+)create mode 100644
Documentation/devicetree/bindings/soc/ti/k3-socinfo.yamlcreate mode 100644drivers/soc/ti/k3-socinfo.c
Quoted 1 line
Any chances you can pick this up?
I merged a version of this driver from Santosh's pull request into the arm/drviers tree yesterday.
Is there something missing?
Arnd
Quoted 13 lines · Arnd Bergmann
Quoted 11 lines · Grygorii Strashko
Quoted 8 lines · Grygorii Strashko
.../bindings/soc/ti/k3-socinfo.yaml | 40 +++++ drivers/soc/ti/Kconfig | 10 ++ drivers/soc/ti/Makefile | 1 + drivers/soc/ti/k3-socinfo.c | 152 ++++++++++++++++++ 4 files changed, 203 insertions(+)create mode 100644
Documentation/devicetree/bindings/soc/ti/k3-socinfo.yamlcreate mode 100644drivers/soc/ti/k3-socinfo.c
Quoted 7 lines
Quoted 1 line
Any chances you can pick this up?
I merged a version of this driver from Santosh's pull request into the arm/drviers tree yesterday.
Is there something missing?
Nope. I was going to reply on the thread but missed it.
Regards,
Santosh
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Quoted 14 lines · On 29/05/2020 22:19, [email protected] wrote:
Quoted 13 lines · Arnd Bergmann
Quoted 11 lines · Grygorii Strashko
Quoted 8 lines · Grygorii Strashko
.../bindings/soc/ti/k3-socinfo.yaml | 40 +++++ drivers/soc/ti/Kconfig | 10 ++ drivers/soc/ti/Makefile | 1 + drivers/soc/ti/k3-socinfo.c | 152 ++++++++++++++++++
4 files changed, 203 insertions(+)create mode 100644
Documentation/devicetree/bindings/soc/ti/k3-socinfo.yamlcreate mode 100644drivers/soc/ti/k3-socinfo.c
Quoted 8 lines
Quoted 7 lines
Quoted 1 line
Any chances you can pick this up?
I merged a version of this driver from Santosh's pull request into the arm/drviers tree yesterday.
Is there something missing?
Nope. I was going to reply on the thread but missed it.
Oh. Thanks. I've missed that it was already picked up.
Thanks again.
Signature · 7 lines
Best regards, grygorii _______________________________________________ linux-arm-kernel mailing list [email protected] http://lists.infradead.org/mailman/listinfo/linux-arm-kernel