Skip to contentSkip to conversation

dmaengine: tegra-apb: Handle DMA_PREP_INTERRUPT flag properly

PATCH In review Dmitry Osipenko 3 participants 5 messages May 5, 2019 – May 21, 2019

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 dmaengine: tegra-apb: Handle DMA_PREP_INTERRUPT flag properly

The DMA_PREP_INTERRUPT flag means that descriptor's callback should be invoked upon transfer completion and that's it. For some reason driver completely disables the hardware interrupt handling, leaving channel in unusable state if transfer is issued with the flag being unset. Note that there are no occurrences in the relevant drivers that do not set the flag, hence this patch doesn't fix any actual bug and merely fixes potential problem.

---
 drivers/dma/tegra20-apb-dma.c | 41 ++++++++++++++++++++++++-----------
 1 file changed, 28 insertions(+), 13 deletions(-)
drivers/dma/tegra20-apb-dma.c +28 -13
index cf462b1abc0b..29d972b7546f 100644
@@ -561,6 +561,9 @@ static void tegra_dma_abort_all(struct tegra_dma_channel *tdc)
 			dma_desc->dma_status = DMA_ERROR;
 			list_add_tail(&dma_desc->node, &tdc->free_dma_desc);
 
+			if (dma_desc->cb_count < 0)
+				continue;
+
 			/* Add in cb list if it is not there. */
 			if (!dma_desc->cb_count)
 				list_add_tail(&dma_desc->cb_node,
@@ -616,9 +619,13 @@ static void handle_once_dma_done(struct tegra_dma_channel *tdc,
 	if (sgreq->last_sg) {
 		dma_desc->dma_status = DMA_COMPLETE;
 		dma_cookie_complete(&dma_desc->txd);
-		if (!dma_desc->cb_count)
-			list_add_tail(&dma_desc->cb_node, &tdc->cb_desc);
-		dma_desc->cb_count++;
+		if (dma_desc->cb_count >= 0) {
+			if (!dma_desc->cb_count)
+				list_add_tail(&dma_desc->cb_node,
+					      &tdc->cb_desc);
+
+			dma_desc->cb_count++;
+		}
 		list_add_tail(&dma_desc->node, &tdc->free_dma_desc);
 	}
 	list_add_tail(&sgreq->node, &tdc->free_sg_req);
@@ -645,9 +652,11 @@ static void handle_cont_sngl_cycle_dma_done(struct tegra_dma_channel *tdc,
 		dma_desc->bytes_requested;
 
 	/* Callback need to be call */
-	if (!dma_desc->cb_count)
-		list_add_tail(&dma_desc->cb_node, &tdc->cb_desc);
-	dma_desc->cb_count++;
+	if (dma_desc->cb_count >= 0) {
+		if (!dma_desc->cb_count)
+			list_add_tail(&dma_desc->cb_node, &tdc->cb_desc);
+		dma_desc->cb_count++;
+	}
 
 	/* If not last req then put at end of pending list */
 	if (!list_is_last(&sgreq->node, &tdc->pending_sg_req)) {
@@ -802,7 +811,7 @@ static int tegra_dma_terminate_all(struct dma_chan *dc)
 		dma_desc  = list_first_entry(&tdc->cb_desc,
 					typeof(*dma_desc), cb_node);
 		list_del(&dma_desc->cb_node);
-		dma_desc->cb_count = 0;
+		dma_desc->cb_count = -1;
 	}
 	spin_unlock_irqrestore(&tdc->lock, flags);
 	return 0;
@@ -988,8 +997,7 @@ static struct dma_async_tx_descriptor *tegra_dma_prep_slave_sg(
 		csr |= tdc->slave_id << TEGRA_APBDMA_CSR_REQ_SEL_SHIFT;
 	}
 
-	if (flags & DMA_PREP_INTERRUPT)
-		csr |= TEGRA_APBDMA_CSR_IE_EOC;
+	csr |= TEGRA_APBDMA_CSR_IE_EOC;
 
 	apb_seq |= TEGRA_APBDMA_APBSEQ_WRAP_WORD_1;
 
@@ -1000,11 +1008,15 @@ static struct dma_async_tx_descriptor *tegra_dma_prep_slave_sg(
 	}
 	INIT_LIST_HEAD(&dma_desc->tx_list);
 	INIT_LIST_HEAD(&dma_desc->cb_node);
-	dma_desc->cb_count = 0;
 	dma_desc->bytes_requested = 0;
 	dma_desc->bytes_transferred = 0;
 	dma_desc->dma_status = DMA_IN_PROGRESS;
 
+	if (flags & DMA_PREP_INTERRUPT)
+		dma_desc->cb_count = 0;
+	else
+		dma_desc->cb_count = -1;
+
 	/* Make transfer requests */
 	for_each_sg(sgl, sg, sg_len, i) {
 		u32 len, mem;
@@ -1131,8 +1143,7 @@ static struct dma_async_tx_descriptor *tegra_dma_prep_dma_cyclic(
 		csr |= tdc->slave_id << TEGRA_APBDMA_CSR_REQ_SEL_SHIFT;
 	}
 
-	if (flags & DMA_PREP_INTERRUPT)
-		csr |= TEGRA_APBDMA_CSR_IE_EOC;
+	csr |= TEGRA_APBDMA_CSR_IE_EOC;
 
 	apb_seq |= TEGRA_APBDMA_APBSEQ_WRAP_WORD_1;
 
@@ -1144,7 +1155,11 @@ static struct dma_async_tx_descriptor *tegra_dma_prep_dma_cyclic(
 
 	INIT_LIST_HEAD(&dma_desc->tx_list);
 	INIT_LIST_HEAD(&dma_desc->cb_node);
-	dma_desc->cb_count = 0;
+
+	if (flags & DMA_PREP_INTERRUPT)
+		dma_desc->cb_count = 0;
+	else
+		dma_desc->cb_count = -1;
 
 	dma_desc->bytes_transferred = 0;
 	dma_desc->bytes_requested = buf_len;
Signature · 1 line
2.21.0
maintainer
#1 lore raw
Quoted 9 lines · Dmitry Osipenko

The DMA_PREP_INTERRUPT flag means that descriptor's callback should be invoked upon transfer completion and that's it. For some reason driver completely disables the hardware interrupt handling, leaving channel in unusable state if transfer is issued with the flag being unset. Note that there are no occurrences in the relevant drivers that do not set the flag, hence this patch doesn't fix any actual bug and merely fixes potential problem.

From having a look at this, I am guessing that we have never really tested the case where DMA_PREP_INTERRUPT flag is not set because as you mentioned it does not look like this will work at all!

Is there are use-case you are looking at where you don't set the DMA_PREP_INTERRUPT flag?

If not I am wondering if we should even bother supporting this and warn if it is not set. AFAICT it does not appear to be mandatory, but maybe Vinod can comment more on this.

Cheers
Jon

Signature · 1 line
nvpublic
#2 lore raw

08.05.2019 12:24, Jon Hunter пишет:

Quoted 10 lines · Dmitry Osipenko
Quoted 8 lines

The DMA_PREP_INTERRUPT flag means that descriptor's callback should be invoked upon transfer completion and that's it. For some reason driver completely disables the hardware interrupt handling, leaving channel in unusable state if transfer is issued with the flag being unset. Note that there are no occurrences in the relevant drivers that do not set the flag, hence this patch doesn't fix any actual bug and merely fixes potential problem.

Quoted 8 lines
Quoted 1 line

From having a look at this, I am guessing that we have never really tested the case where DMA_PREP_INTERRUPT flag is not set because as you mentioned it does not look like this will work at all!

Is there are use-case you are looking at where you don't set the DMA_PREP_INTERRUPT flag?

No. I just noticed it while was checking whether we really need to handle the BUSY bit state for the Ben's "accurate reporting" patch.

Quoted 3 lines

If not I am wondering if we should even bother supporting this and warn if it is not set. AFAICT it does not appear to be mandatory, but maybe Vinod can comment more on this.

The warning message will be also okay if it's not mandatory.

maintainer
#3 lore raw
In reply to Jon Hunter
Quoted 10 lines · Jon Hunter
Quoted 8 lines · Dmitry Osipenko

The DMA_PREP_INTERRUPT flag means that descriptor's callback should be invoked upon transfer completion and that's it. For some reason driver completely disables the hardware interrupt handling, leaving channel in unusable state if transfer is issued with the flag being unset. Note that there are no occurrences in the relevant drivers that do not set the flag, hence this patch doesn't fix any actual bug and merely fixes potential problem.

Quoted 5 lines
Quoted 3 lines

From having a look at this, I am guessing that we have never really

tested the case where DMA_PREP_INTERRUPT flag is not set because as you mentioned it does not look like this will work at all!

That is a fair argument

Quoted 7 lines

Is there are use-case you are looking at where you don't set the DMA_PREP_INTERRUPT flag?

If not I am wondering if we should even bother supporting this and warn if it is not set. AFAICT it does not appear to be mandatory, but maybe Vinod can comment more on this.

This is supposed to be used in the cases where you submit a bunch of descriptors and selectively dont want an interrupt in few cases...

Is this such a case?

Thanks
~Vinod

#4 lore raw

21.05.2019 7:55, Vinod Koul пишет:

Quoted 22 lines · Jon Hunter
Quoted 10 lines · Dmitry Osipenko
Quoted 8 lines

The DMA_PREP_INTERRUPT flag means that descriptor's callback should be invoked upon transfer completion and that's it. For some reason driver completely disables the hardware interrupt handling, leaving channel in unusable state if transfer is issued with the flag being unset. Note that there are no occurrences in the relevant drivers that do not set the flag, hence this patch doesn't fix any actual bug and merely fixes potential problem.

Quoted 5 lines
Quoted 3 lines

From having a look at this, I am guessing that we have never really

tested the case where DMA_PREP_INTERRUPT flag is not set because as you mentioned it does not look like this will work at all!

That is a fair argument

Quoted 4 lines

Is there are use-case you are looking at where you don't set the DMA_PREP_INTERRUPT flag?

Quoted 8 lines
Quoted 3 lines

If not I am wondering if we should even bother supporting this and warn if it is not set. AFAICT it does not appear to be mandatory, but maybe Vinod can comment more on this.

This is supposed to be used in the cases where you submit a bunch of descriptors and selectively dont want an interrupt in few cases...

Is this such a case?

The flag is set by device drivers. AFAIK, none of the drivers that are used on Tegra SoC's make a use of that flag, at least not in upstream.