Skip to contentSkip to conversation

rio500: refuse more than one device at a time

PATCH Superseded Oliver Neukum 2 participants 5 messages May 7, 2019

Subsystems (2)

v2 of 3 Superseded Latest is v3 →

lore
Share & tools
lore
#0 lore raw

PATCH v2 1/4 rio500: refuse more than one device at a time

This driver is using a global variable. It cannot handle more than one device at a time. The issue has been existing since the dawn of the driver.

V2: Fixed locking in probe()
Fixed Documentation

---
 drivers/usb/misc/rio500.c | 24 ++++++++++++++++++------
 1 file changed, 18 insertions(+), 6 deletions(-)
drivers/usb/misc/rio500.c +18 -6
index 13e4889bc34f..fa921ae60ffa 100644
@@ -447,15 +447,23 @@ static int probe_rio(struct usb_interface *intf,
 {
 	struct usb_device *dev = interface_to_usbdev(intf);
 	struct rio_usb_data *rio = &rio_instance;
-	int retval;
+	int retval = 0;
 
-	dev_info(&intf->dev, "USB Rio found at address %d\n", dev->devnum);
+	mutex_lock(&rio500_mutex);
+	if (rio->present) {
+		dev_info(&intf->dev, "Second USB Rio at address %d refused\n", dev->devnum);
+		retval = -EBUSY;
+		goto bail_out;
+	} else {
+		dev_info(&intf->dev, "USB Rio found at address %d\n", dev->devnum);
+	}
 
 	retval = usb_register_dev(intf, &usb_rio_class);
 	if (retval) {
 		dev_err(&dev->dev,
 			"Not able to get a minor for this device.\n");
-		return -ENOMEM;
+		retval = -ENOMEM;
+		goto bail_out;
 	}
 
 	rio->rio_dev = dev;
@@ -464,7 +472,8 @@ static int probe_rio(struct usb_interface *intf,
 		dev_err(&dev->dev,
 			"probe_rio: Not enough memory for the output buffer\n");
 		usb_deregister_dev(intf, &usb_rio_class);
-		return -ENOMEM;
+		retval = -ENOMEM;
+		goto bail_out;
 	}
 	dev_dbg(&intf->dev, "obuf address:%p\n", rio->obuf);
 
@@ -473,7 +482,8 @@ static int probe_rio(struct usb_interface *intf,
 			"probe_rio: Not enough memory for the input buffer\n");
 		usb_deregister_dev(intf, &usb_rio_class);
 		kfree(rio->obuf);
-		return -ENOMEM;
+		retval = -ENOMEM;
+		goto bail_out;
 	}
 	dev_dbg(&intf->dev, "ibuf address:%p\n", rio->ibuf);
 
@@ -481,8 +491,10 @@ static int probe_rio(struct usb_interface *intf,
 
 	usb_set_intfdata (intf, rio);
 	rio->present = 1;
+bail_out:
+	mutex_unlock(&rio500_mutex);
 
-	return 0;
+	return retval;
 }
 
 static void disconnect_rio(struct usb_interface *intf)
Signature · 1 line
2.16.4
#1 lore raw

PATCH v2 2/4 rio500: fix memeory leak in close after disconnect

If a disconnected device is closed, rio_close() must free the buffers.

---
 drivers/usb/misc/rio500.c | 17 +++++++++++++++--
 1 file changed, 15 insertions(+), 2 deletions(-)
drivers/usb/misc/rio500.c +15 -2
index fa921ae60ffa..a1832c195b5f 100644
@@ -86,9 +86,22 @@ static int close_rio(struct inode *inode, struct file *file)
 {
 	struct rio_usb_data *rio = &rio_instance;
 
-	rio->isopen = 0;
+	/* against disconnect() */
+	mutex_lock(&rio500_mutex);
+	mutex_lock(&(rio->lock));
 
-	dev_info(&rio->rio_dev->dev, "Rio closed.\n");
+	rio->isopen = 0;
+	if (!rio->present) {
+		/* cleanup has been delayed */
+		kfree(rio->ibuf);
+		kfree(rio->obuf);
+		rio->ibuf = NULL;
+		rio->obuf = NULL;
+	} else {
+		dev_info(&rio->rio_dev->dev, "Rio closed.\n");
+	}
+	mutex_unlock(&(rio->lock));
+	mutex_unlock(&rio500_mutex);
 	return 0;
 }
 
Signature · 1 line
2.16.4
#2 lore raw

PATCH v2 3/4 rio500: simplify locking

In reply to Oliver Neukum

Admitting that there can be only one device allows us to drop any pretense about locking one device or a table of devices.

---
 drivers/usb/misc/rio500.c | 43 ++++++++++++++++---------------------------
 1 file changed, 16 insertions(+), 27 deletions(-)
drivers/usb/misc/rio500.c +16 -27
index a1832c195b5f..a0574f54738f 100644
@@ -51,7 +51,6 @@ struct rio_usb_data {
         char *obuf, *ibuf;              /* transfer buffers */
         char bulk_in_ep, bulk_out_ep;   /* Endpoint assignments */
         wait_queue_head_t wait_q;       /* for timeouts */
-	struct mutex lock;          /* general race avoidance */
 };
 
 static DEFINE_MUTEX(rio500_mutex);
@@ -63,10 +62,8 @@ static int open_rio(struct inode *inode, struct file *file)
 
 	/* against disconnect() */
 	mutex_lock(&rio500_mutex);
-	mutex_lock(&(rio->lock));
 
 	if (rio->isopen || !rio->present) {
-		mutex_unlock(&(rio->lock));
 		mutex_unlock(&rio500_mutex);
 		return -EBUSY;
 	}
@@ -74,7 +71,6 @@ static int open_rio(struct inode *inode, struct file *file)
 
 	init_waitqueue_head(&rio->wait_q);
 
-	mutex_unlock(&(rio->lock));
 
 	dev_info(&rio->rio_dev->dev, "Rio opened.\n");
 	mutex_unlock(&rio500_mutex);
@@ -88,7 +84,6 @@ static int close_rio(struct inode *inode, struct file *file)
 
 	/* against disconnect() */
 	mutex_lock(&rio500_mutex);
-	mutex_lock(&(rio->lock));
 
 	rio->isopen = 0;
 	if (!rio->present) {
@@ -100,7 +95,6 @@ static int close_rio(struct inode *inode, struct file *file)
 	} else {
 		dev_info(&rio->rio_dev->dev, "Rio closed.\n");
 	}
-	mutex_unlock(&(rio->lock));
 	mutex_unlock(&rio500_mutex);
 	return 0;
 }
@@ -115,7 +109,7 @@ static long ioctl_rio(struct file *file, unsigned int cmd, unsigned long arg)
 	int retries;
 	int retval=0;
 
-	mutex_lock(&(rio->lock));
+	mutex_lock(&rio500_mutex);
         /* Sanity check to make sure rio is connected, powered, etc */
         if (rio->present == 0 || rio->rio_dev == NULL) {
 		retval = -ENODEV;
@@ -259,7 +253,7 @@ static long ioctl_rio(struct file *file, unsigned int cmd, unsigned long arg)
 
 
 err_out:
-	mutex_unlock(&(rio->lock));
+	mutex_unlock(&rio500_mutex);
 	return retval;
 }
 
@@ -279,12 +273,12 @@ write_rio(struct file *file, const char __user *buffer,
 	int errn = 0;
 	int intr;
 
-	intr = mutex_lock_interruptible(&(rio->lock));
+	intr = mutex_lock_interruptible(&rio500_mutex);
 	if (intr)
 		return -EINTR;
         /* Sanity check to make sure rio is connected, powered, etc */
         if (rio->present == 0 || rio->rio_dev == NULL) {
-		mutex_unlock(&(rio->lock));
+		mutex_unlock(&rio500_mutex);
 		return -ENODEV;
 	}
 
@@ -307,7 +301,7 @@ write_rio(struct file *file, const char __user *buffer,
 				goto error;
 			}
 			if (signal_pending(current)) {
-				mutex_unlock(&(rio->lock));
+				mutex_unlock(&rio500_mutex);
 				return bytes_written ? bytes_written : -EINTR;
 			}
 
@@ -345,12 +339,12 @@ write_rio(struct file *file, const char __user *buffer,
 		buffer += copy_size;
 	} while (count > 0);
 
-	mutex_unlock(&(rio->lock));
+	mutex_unlock(&rio500_mutex);
 
 	return bytes_written ? bytes_written : -EIO;
 
 error:
-	mutex_unlock(&(rio->lock));
+	mutex_unlock(&rio500_mutex);
 	return errn;
 }
 
@@ -367,12 +361,12 @@ read_rio(struct file *file, char __user *buffer, size_t count, loff_t * ppos)
 	char *ibuf;
 	int intr;
 
-	intr = mutex_lock_interruptible(&(rio->lock));
+	intr = mutex_lock_interruptible(&rio500_mutex);
 	if (intr)
 		return -EINTR;
 	/* Sanity check to make sure rio is connected, powered, etc */
         if (rio->present == 0 || rio->rio_dev == NULL) {
-		mutex_unlock(&(rio->lock));
+		mutex_unlock(&rio500_mutex);
 		return -ENODEV;
 	}
 
@@ -383,11 +377,11 @@ read_rio(struct file *file, char __user *buffer, size_t count, loff_t * ppos)
 
 	while (count > 0) {
 		if (signal_pending(current)) {
-			mutex_unlock(&(rio->lock));
+			mutex_unlock(&rio500_mutex);
 			return read_count ? read_count : -EINTR;
 		}
 		if (!rio->rio_dev) {
-			mutex_unlock(&(rio->lock));
+			mutex_unlock(&rio500_mutex);
 			return -ENODEV;
 		}
 		this_read = (count >= IBUF_SIZE) ? IBUF_SIZE : count;
@@ -405,7 +399,7 @@ read_rio(struct file *file, char __user *buffer, size_t count, loff_t * ppos)
 			count = this_read = partial;
 		} else if (result == -ETIMEDOUT || result == 15) {	/* FIXME: 15 ??? */
 			if (!maxretry--) {
-				mutex_unlock(&(rio->lock));
+				mutex_unlock(&rio500_mutex);
 				dev_err(&rio->rio_dev->dev,
 					"read_rio: maxretry timeout\n");
 				return -ETIME;
@@ -415,19 +409,19 @@ read_rio(struct file *file, char __user *buffer, size_t count, loff_t * ppos)
 			finish_wait(&rio->wait_q, &wait);
 			continue;
 		} else if (result != -EREMOTEIO) {
-			mutex_unlock(&(rio->lock));
+			mutex_unlock(&rio500_mutex);
 			dev_err(&rio->rio_dev->dev,
 				"Read Whoops - result:%d partial:%u this_read:%u\n",
 				result, partial, this_read);
 			return -EIO;
 		} else {
-			mutex_unlock(&(rio->lock));
+			mutex_unlock(&rio500_mutex);
 			return (0);
 		}
 
 		if (this_read) {
 			if (copy_to_user(buffer, ibuf, this_read)) {
-				mutex_unlock(&(rio->lock));
+				mutex_unlock(&rio500_mutex);
 				return -EFAULT;
 			}
 			count -= this_read;
@@ -435,7 +429,7 @@ read_rio(struct file *file, char __user *buffer, size_t count, loff_t * ppos)
 			buffer += this_read;
 		}
 	}
-	mutex_unlock(&(rio->lock));
+	mutex_unlock(&rio500_mutex);
 	return read_count;
 }
 
@@ -500,8 +494,6 @@ static int probe_rio(struct usb_interface *intf,
 	}
 	dev_dbg(&intf->dev, "ibuf address:%p\n", rio->ibuf);
 
-	mutex_init(&(rio->lock));
-
 	usb_set_intfdata (intf, rio);
 	rio->present = 1;
 bail_out:
@@ -519,12 +511,10 @@ static void disconnect_rio(struct usb_interface *intf)
 	if (rio) {
 		usb_deregister_dev(intf, &usb_rio_class);
 
-		mutex_lock(&(rio->lock));
 		if (rio->isopen) {
 			rio->isopen = 0;
 			/* better let it finish - the release will do whats needed */
 			rio->rio_dev = NULL;
-			mutex_unlock(&(rio->lock));
 			mutex_unlock(&rio500_mutex);
 			return;
 		}
@@ -536,7 +526,6 @@ static void disconnect_rio(struct usb_interface *intf)
 		dev_info(&intf->dev, "USB Rio disconnected.\n");
 
 		rio->present = 0;
-		mutex_unlock(&(rio->lock));
 	}
 	mutex_unlock(&rio500_mutex);
 }
Signature · 1 line
2.16.4
#3 lore raw

PATCH v2 4/4 USB: rio500: update Documentation

In reply to Oliver Neukum

Added the newly added limit and updated the text a bit

---
 Documentation/usb/rio.txt | 54 +++++++++++++----------------------------------
 1 file changed, 15 insertions(+), 39 deletions(-)
Documentation/usb/rio.txt +15 -39
index ca9adcf56355..63adb030e0e9 100644
@@ -76,54 +76,25 @@ Additional Information and userspace tools
 Requirements
 ============
 
-A host with a USB port.  Ideally, either a UHCI (Intel) or OHCI
-(Compaq and others) hardware port should work.
+A host with a USB port running a Linux kernel with RIO 500 support enabled.
 
-A Linux development kernel (2.3.x) with USB support enabled or a
-backported version to linux-2.2.x.  See http://www.linux-usb.org for
-more information on accomplishing this.
+The driver is a module called rio500, which should be automatically loaded
+as you plug in your device.
+If that fails you can manually load it with
 
-A Linux kernel with RIO 500 support enabled.
+  modprobe rio500
 
-'lspci' which is only needed to determine the type of USB hardware
-available in your machine.
-
-Configuration
-
-Using `lspci -v`, determine the type of USB hardware available.
-
-  If you see something like::
-
-    USB Controller: ......
-    Flags: .....
-    I/O ports at ....
-
-  Then you have a UHCI based controller.
-
-  If you see something like::
-
-     USB Controller: .....
-     Flags: ....
-     Memory at .....
-
-  Then you have a OHCI based controller.
-
-Using `make menuconfig` or your preferred method for configuring the
-kernel, select 'Support for USB', 'OHCI/UHCI' depending on your
-hardware (determined from the steps above), 'USB Diamond Rio500 support', and
-'Preliminary USB device filesystem'.  Compile and install the modules
-(you may need to execute `depmod -a` to update the module
-dependencies).
-
-Add a device for the USB rio500::
+Udev should automatically create a device node as soon as plug in your device.
+If that fails, you can manually add a device for the USB rio500::
 
   mknod /dev/usb/rio500 c 180 64
 
-Set appropriate permissions for /dev/usb/rio500 (don't forget about
+In that case,
+set appropriate permissions for /dev/usb/rio500 (don't forget about
 group and world permissions).  Both read and write permissions are
 required for proper operation.
 
-Load the appropriate modules (if compiled as modules):
+Load the appropriate modules (if ddcompiled as modules):
 
   OHCI::
 
@@ -140,6 +111,11 @@ Load the appropriate modules (if compiled as modules):
 That's it.  The Rio500 Utils at: http://rio500.sourceforge.net should
 be able to access the rio500.
 
+Limits
+======
+
+You can use only a single rio500 device at a time with your computer.
+
 Bugs
 ====
 
Signature · 1 line
2.16.4
#4 lore raw

Re: [PATCHv2 4/4] USB: rio500: update Documentation

Quoted 12 lines · Oliver Neukum

Added the newly added limit and updated the text a bit

---
  Documentation/usb/rio.txt | 54 +++++++++++++----------------------------------
  1 file changed, 15 insertions(+), 39 deletions(-)
Documentation/usb/rio.txt +0 -0
index ca9adcf56355..63adb030e0e9 100644
@@ -76,54 +76,25 @@ Additional Information and userspace tools

[...]

Documentation/usb/rio.txt Additional Information and userspace tools · line 92

Quoted 8 lines
Documentation/usb/rio.txt +3 -2
-Add a device for the USB rio500::
+Udev should automatically create a device node as soon as plug in your device.
+If that fails, you can manually add a device for the USB rio500::
 
    mknod /dev/usb/rio500 c 180 64
 
-Set appropriate permissions for /dev/usb/rio500 (don't forget about
+In that case,

Strange formatting...

Documentation/usb/rio.txt Additional Information and userspace tools · line 97

Quoted 6 lines
Documentation/usb/rio.txt +2 -1
+set appropriate permissions for /dev/usb/rio500 (don't forget about
  group and world permissions).  Both read and write permissions are
  required for proper operation.
 
-Load the appropriate modules (if compiled as modules):
+Load the appropriate modules (if ddcompiled as modules):

ddcompiled? :-)

[...]

MBR, Sergei