Skip to contentSkip to conversation

: Persistent "max-amp" level on hdspmixer inputs

ALSA - tools 0000801 [email protected] 1 participant 1 message Jan 15, 2005

lore
Share & tools
lore
#0 lore raw

A NOTE has been added to this issue.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=801>
======================================================================

Reported By:                kme
Assigned To:                charbonnel
======================================================================
Project:                    ALSA - tools
Issue ID:                   801
Category:                   hdsp progs
Reproducibility:            always
Severity:                   minor
Priority:                   normal
Status:                     assigned
======================================================================
Date Submitted:             01-10-2005 09:20 CET
Last Modified:              01-15-2005 19:27 CET

======================================================================
Summary: Persistent "max-amp" level on hdspmixer inputs
Description:
HDSPmixer shows constant "max-amp" (actually -6db or so) levels at all times in the first 8 channels. And when sound is played internally the middle row meters (playback) show the left channel with maxed-out levels while the right channel shows nothing. Peak meters (yellow), however, appear to work normally.

A screenshot of the mixer while playing a stereo soundfile routed to AN1+2 and Analog (headphones) only with NOTHING connected to the inputs can be cound here:

http://www.esm.rochester.edu/kevine/hdsp_screenshot.jpg

Note that the outputs (bottom row) show proper levels as do the yellow peak meters in playback (Out 1+2).

Signal quality is unaffected.
======================================================================

----------------------------------------------------------------------
slick - 01-15-05 19:27
----------------------------------------------------------------------
I used SuSE 9.1 with the current Kernel 2.6.5 and the build-in ALSA (I think 1.03) and the hdspmixer worked fine for my Multiface with cardbus adapter.
Today I tried out the current 9.2 Kernel 2.6.8-24.10 and I had similar problem as described in this thread (flickering peaks at the first 7 input channels of my Multiface).
After the installation of ALSA 1.08 there were no improvements at 2.6.8-24.10 (the same problem with the hdspmixer) but after the installation of ALSA 1.08 at the current SuSE 9.1 Kernel 2.6.5 the same problem occured at this Kernel too. So I think it could be an ALSA bug. I thought this problem was solved with release 1.08 but it doesn't seem so.
If you need more information send an E-Mail to [email protected]

Issue History
Date Modified Username Field Change
======================================================================
01-10-05 09:20 kme New Issue
01-15-05 19:27 slick Note Added: 0003212
======================================================================

-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt