v2 [PATCH 0/2] Add Global Clock Controller (GCC) driver for SM7250
This patchset adds support for the global clock controller found on SM7250 based devices. This should allow most non-multimedia device drivers to probe and control their clocks.
Sreeshankar K (2):
clk: qcom: Add Global Clock Controller (GCC) driver for SM7250
dt-bindings: clock: Add GCC clock bindings for SM7250
.../bindings/clock/qcom,gcc-sm7250.yaml | 60 + drivers/clk/qcom/Kconfig | 9 + drivers/clk/qcom/Makefile | 1 + drivers/clk/qcom/gcc-sm7250.c | 2347 +++++++++++++++++ include/dt-bindings/clock/qcom,gcc-sm7250.h | 163 ++ 5 files changed, 2580 insertions(+) create mode 100644 Documentation/devicetree/bindings/clock/qcom,gcc-sm7250.yaml create mode 100644 drivers/clk/qcom/gcc-sm7250.c create mode 100644 include/dt-bindings/clock/qcom,gcc-sm7250.h
Signature · 1 line
2.43.0
PATCH 1/2 clk: qcom: Add Global Clock Controller (GCC) driver for SM7250
Add support for the global clock controller found on SM7250 based devices. This should allow most non-multimedia device drivers to probe and control their clocks.
--- drivers/clk/qcom/Kconfig | 9 + drivers/clk/qcom/Makefile | 1 + drivers/clk/qcom/gcc-sm7250.c | 2347 +++++++++++++++++++++++++++++++++ 3 files changed, 2357 insertions(+) create mode 100644 drivers/clk/qcom/gcc-sm7250.c
drivers/clk/qcom/Kconfig +9 -0
@@ -1416,6 +1416,15 @@ config SM_GCC_7150 Say Y if you want to use peripheral devices such as UART, SPI, I2C, USB, SD/UFS, PCIe etc. +config SM_GCC_7250 + tristate "SM7250 Global Clock Controller" + depends on ARM64 || COMPILE_TEST + select QCOM_GDSC + help + Support for the global clock controller on SM7250 devices. + Say Y if you want to use peripheral devices such as UART, + SPI, I2C, USB, SD/UFS etc. + config SM_GCC_MILOS tristate "Milos Global Clock Controller" depends on ARM64 || COMPILE_TEST
drivers/clk/qcom/Makefile +1 -0
@@ -174,6 +174,7 @@ obj-$(CONFIG_SM_GCC_6125) += gcc-sm6125.o obj-$(CONFIG_SM_GCC_6350) += gcc-sm6350.o obj-$(CONFIG_SM_GCC_6375) += gcc-sm6375.o obj-$(CONFIG_SM_GCC_7150) += gcc-sm7150.o +obj-$(CONFIG_SM_GCC_7250) += gcc-sm7250.o obj-$(CONFIG_SM_GCC_8150) += gcc-sm8150.o obj-$(CONFIG_SM_GCC_8250) += gcc-sm8250.o obj-$(CONFIG_SM_GCC_8350) += gcc-sm8350.o
drivers/clk/qcom/gcc-sm7250.c new file +2347 -0
2,347 lines not on this page · raw message
Signature · 1 line
2.43.0
PATCH 2/2 dt-bindings: clock: Add GCC clock bindings for SM7250
In reply to Sreeshankar KAdd device tree bindings for global clock controller on SM7250 SoC.
--- .../bindings/clock/qcom,gcc-sm7250.yaml | 60 +++++++ include/dt-bindings/clock/qcom,gcc-sm7250.h | 163 ++++++++++++++++++ 2 files changed, 223 insertions(+) create mode 100644 Documentation/devicetree/bindings/clock/qcom,gcc-sm7250.yaml create mode 100644 include/dt-bindings/clock/qcom,gcc-sm7250.h
Documentation/devicetree/bindings/clock/qcom,gcc-sm7250.yaml new file +60 -0
@@ -0,0 +1,60 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,gcc-sm7250.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Global Clock & Reset Controller on SM7250 + +maintainers: + - Bjorn Andersson <[email protected]> + - Sreeshankar K <[email protected]> + +description: | + Qualcomm global clock control module provides the clocks, resets and power + domains on SM7250. + + See also: include/dt-bindings/clock/qcom,gcc-sm7250.h + +properties: + compatible: + const: qcom,gcc-sm7250 + + clocks: + items: + - description: Board XO source + - description: Board active XO source + - description: Sleep clock source + + clock-names: + items: + - const: bi_tcxo + - const: bi_tcxo_ao + - const: sleep_clk + +required: + - compatible + - clocks + - clock-names + - '#power-domain-cells' + +allOf: + - $ref: qcom,gcc.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,rpmh.h> + clock-controller@100000 { + compatible = "qcom,gcc-sm7250"; + reg = <0x00100000 0x1f0000>; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&rpmhcc RPMH_CXO_CLK_A>, + <&sleep_clk>; + clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + }; +...
include/dt-bindings/clock/qcom,gcc-sm7250.h new file +163 -0
163 lines not on this page · raw message
Signature · 1 line
2.43.0
Re: [PATCH 2/2] dt-bindings: clock: Add GCC clock bindings for SM7250
Quoted 3 lines · Sreeshankar K
Add device tree bindings for global clock controller on SM7250 SoC.
Signed-off-by Sreeshankar K <[email protected]>
Please start using b4. Does this work:
b4 diff '<[email protected]>'
? No.
Quoted 30 lines
--- .../bindings/clock/qcom,gcc-sm7250.yaml | 60 +++++++ include/dt-bindings/clock/qcom,gcc-sm7250.h | 163 ++++++++++++++++++ 2 files changed, 223 insertions(+) create mode 100644 Documentation/devicetree/bindings/clock/qcom,gcc-sm7250.yaml create mode 100644 include/dt-bindings/clock/qcom,gcc-sm7250.hDocumentation/devicetree/bindings/clock/qcom,gcc-sm7250.yaml new file +17
-0@@ -0,0 +1,60 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/clock/qcom,gcc-sm7250.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Global Clock & Reset Controller on SM7250 + +maintainers: + - Bjorn Andersson <[email protected]> + - Sreeshankar K <[email protected]> + +description: | + Qualcomm global clock control module provides the clocks, resets and power + domains on SM7250. + + See also: include/dt-bindings/clock/qcom,gcc-sm7250.h
Documentation/devicetree/bindings/clock/qcom,gcc-sm7250.yaml line 27
Quoted 10 lines
Documentation/devicetree/bindings/clock/qcom,gcc-sm7250.yaml new file +10
-0+ +properties: + compatible: + const: qcom,gcc-sm7250 + + clocks: + items: + - description: Board XO source + - description: Board active XO source + - description: Sleep clock source
Why this cannot go to sm7150 or sm6375 files?
Best regards,
Krzysztof