Skip to contentSkip to conversation

skip ENOTSUPP for BPF selftests

PATCH Superseded Geliang Tang 2 participants 9 messages Jul 4, 2024 – Jul 8, 2024

Subsystems (3)

v1 of 2 Superseded Latest is v2 →

lore
Share & tools
lore
#0 lore raw

cover skip ENOTSUPP for BPF selftests

From: Geliang Tang <[email protected]>

BPF selftests seem to have not been fully tested on Loongarch platforms. There are so many "ENOTSUPP" (-524) errors when running BPF selftests on them since lacking BPF trampoline on Loongarch.

For these "ENOTSUPP" tests, it's better to skip them, instead of reporting some "ENOTSUPP" errors. This patchset skips ENOTSUPP in ASSERT_OK/ ASSERT_OK_PTR/ASSERT_GE helpers to fix them. This is useful for running BPF selftests for other architectures too.

Geliang Tang (6):
selftests/bpf: Define ENOTSUPP in testing_helpers.h selftests/bpf: Skip ENOTSUPP in ASSERT_OK selftests/bpf: Use ASSERT_OK to skip ENOTSUPP selftests/bpf: Null checks for link in bpf_tcp_ca selftests/bpf: Skip ENOTSUPP in ASSERT_OK_PTR selftests/bpf: Skip ENOTSUPP in ASSERT_GE

 .../selftests/bpf/prog_tests/bpf_tcp_ca.c     | 20 +++++++++-------
 .../testing/selftests/bpf/prog_tests/d_path.c |  2 +-
 .../selftests/bpf/prog_tests/lsm_cgroup.c     | 10 +-------
 .../selftests/bpf/prog_tests/module_attach.c  |  2 +-
 .../selftests/bpf/prog_tests/ringbuf.c        |  2 +-
 .../selftests/bpf/prog_tests/sock_addr.c      |  4 ----
 .../selftests/bpf/prog_tests/test_bprm_opts.c |  2 +-
 .../selftests/bpf/prog_tests/test_ima.c       |  2 +-
 .../selftests/bpf/prog_tests/trace_ext.c      |  2 +-
 tools/testing/selftests/bpf/test_maps.c       |  4 ----
 tools/testing/selftests/bpf/test_progs.h      | 24 ++++++++++++++-----
 tools/testing/selftests/bpf/test_verifier.c   |  4 ----
 tools/testing/selftests/bpf/testing_helpers.h |  4 ++++
 13 files changed, 41 insertions(+), 41 deletions(-)
Signature · 1 line
2.43.0
#1 lore raw

PATCH 1/6 selftests/bpf: Define ENOTSUPP in testing_helpers.h

From: Geliang Tang <[email protected]>

ENOTSUPP are defined in so many places in bpf selftests, this patch moves this definition into testing_helpers.h, which is almost included by each tests. And drop all other duplicate definitions.

---
 tools/testing/selftests/bpf/prog_tests/bpf_tcp_ca.c | 4 ----
 tools/testing/selftests/bpf/prog_tests/lsm_cgroup.c | 4 ----
 tools/testing/selftests/bpf/prog_tests/sock_addr.c  | 4 ----
 tools/testing/selftests/bpf/test_maps.c             | 4 ----
 tools/testing/selftests/bpf/test_verifier.c         | 4 ----
 tools/testing/selftests/bpf/testing_helpers.h       | 4 ++++
 6 files changed, 4 insertions(+), 20 deletions(-)
tools/testing/selftests/bpf/prog_tests/bpf_tcp_ca.c +0 -4
index bceff5900016..fa2efb246d3b 100644
@@ -16,10 +16,6 @@
 #include "tcp_ca_kfunc.skel.h"
 #include "bpf_cc_cubic.skel.h"
 
-#ifndef ENOTSUPP
-#define ENOTSUPP 524
-#endif
-
 static const unsigned int total_bytes = 10 * 1024 * 1024;
 static int expected_stg = 0xeB9F;
 
tools/testing/selftests/bpf/prog_tests/lsm_cgroup.c +0 -4
index 130a3b21e467..6df25de8f080 100644
@@ -10,10 +10,6 @@
 #include "cgroup_helpers.h"
 #include "network_helpers.h"
 
-#ifndef ENOTSUPP
-#define ENOTSUPP 524
-#endif
-
 static struct btf *btf;
 
 static __u32 query_prog_cnt(int cgroup_fd, const char *attach_func)
tools/testing/selftests/bpf/prog_tests/sock_addr.c +0 -4
index b880c564a204..68d9255d2bb7 100644
@@ -23,10 +23,6 @@
 #include "getpeername_unix_prog.skel.h"
 #include "network_helpers.h"
 
-#ifndef ENOTSUPP
-# define ENOTSUPP 524
-#endif
-
 #define TEST_NS                 "sock_addr"
 #define TEST_IF_PREFIX          "test_sock_addr"
 #define TEST_IPV4               "127.0.0.4"
tools/testing/selftests/bpf/test_maps.c +0 -4
index dfbab214f4d1..227d7d6eaf8e 100644
@@ -26,10 +26,6 @@
 #include "test_maps.h"
 #include "testing_helpers.h"
 
-#ifndef ENOTSUPP
-#define ENOTSUPP 524
-#endif
-
 int skips;
 
 static struct bpf_map_create_opts map_opts = { .sz = sizeof(map_opts) };
tools/testing/selftests/bpf/test_verifier.c +0 -4
index 610392dfc4fb..447b68509d76 100644
@@ -42,10 +42,6 @@
 #include "../../../include/linux/filter.h"
 #include "testing_helpers.h"
 
-#ifndef ENOTSUPP
-#define ENOTSUPP 524
-#endif
-
 #define MAX_INSNS	BPF_MAXINSNS
 #define MAX_EXPECTED_INSNS	32
 #define MAX_UNEXPECTED_INSNS	32
tools/testing/selftests/bpf/testing_helpers.h +4 -0
index d55f6ab12433..bad21e72dafc 100644
@@ -9,6 +9,10 @@
 #include <bpf/libbpf.h>
 #include <time.h>
 
+#ifndef ENOTSUPP
+#define ENOTSUPP 524
+#endif
+
 #define __TO_STR(x) #x
 #define TO_STR(x) __TO_STR(x)
 
Signature · 1 line
2.43.0
#2 lore raw

PATCH 2/6 selftests/bpf: Skip ENOTSUPP in ASSERT_OK

In reply to Geliang Tang

From: Geliang Tang <[email protected]>

Just like handling ENOTSUPP in test_lsm_cgroup_functional(), this patch checks ENOTSUPP (524) and ENOTSUP (95) in ASSERT_OK(), invoke test__skip() in this case instead of test__fail().

---
 tools/testing/selftests/bpf/prog_tests/lsm_cgroup.c | 6 +-----
 tools/testing/selftests/bpf/test_progs.h            | 9 +++++++--
 2 files changed, 8 insertions(+), 7 deletions(-)
tools/testing/selftests/bpf/prog_tests/lsm_cgroup.c +1 -5
index 6df25de8f080..6511f5f4a00f 100644
@@ -102,12 +102,8 @@ static void test_lsm_cgroup_functional(void)
 	ASSERT_EQ(query_prog_cnt(cgroup_fd, "bpf_lsm_sk_alloc_security"), 0, "prog count");
 	ASSERT_EQ(query_prog_cnt(cgroup_fd, NULL), 0, "total prog count");
 	err = bpf_prog_attach(alloc_prog_fd, cgroup_fd, BPF_LSM_CGROUP, 0);
-	if (err == -ENOTSUPP) {
-		test__skip();
-		goto close_cgroup;
-	}
 	if (!ASSERT_OK(err, "attach alloc_prog_fd"))
-		goto detach_cgroup;
+		goto close_cgroup;
 	ASSERT_EQ(query_prog_cnt(cgroup_fd, "bpf_lsm_sk_alloc_security"), 1, "prog count");
 	ASSERT_EQ(query_prog_cnt(cgroup_fd, NULL), 1, "total prog count");
 
tools/testing/selftests/bpf/test_progs.h +7 -2
index 0ba5a20b19ba..25f6976c08b5 100644
@@ -338,8 +338,13 @@ int test__join_cgroup(const char *path);
 	static int duration = 0;					\
 	long long ___res = (res);					\
 	bool ___ok = ___res == 0;					\
-	CHECK(!___ok, (name), "unexpected error: %lld (errno %d)\n",	\
-	      ___res, errno);						\
+	if (___res == -ENOTSUPP || ___res == -ENOTSUP ||		\
+	    errno == ENOTSUPP || errno == ENOTSUP)			\
+		test__skip();						\
+	else								\
+		CHECK(!___ok, (name),					\
+		      "unexpected error: %lld (errno %d)\n",		\
+		      ___res, errno);					\
 	___ok;								\
 })
 
Signature · 1 line
2.43.0
#3 lore raw

PATCH 3/6 selftests/bpf: Use ASSERT_OK to skip ENOTSUPP

In reply to Geliang Tang

From: Geliang Tang <[email protected]>

There are so many "ENOTSUPP" (-524) errors when running BPF selftests on a Loongarch platform since lacking BPF trampoline on Loongarch:

'''
test_d_path_basic:PASS:setup 0 nsec
libbpf: prog 'prog_stat': failed to attach: unknown error (-524)
libbpf: prog 'prog_stat': failed to auto-attach: -524 test_d_path_basic:FAIL:setup attach failed: -524

 #77/1    d_path/basic:FAIL
 #77/2    d_path/check_rdonly_mem:OK
 #77/3    d_path/check_alloc_mem:OK
 #77      d_path:FAIL
 ... ...
 test_module_attach:PASS:skel_open 0 nsec
 test_module_attach:PASS:set_attach_target 0 nsec
 test_module_attach:PASS:set_attach_target_explicit 0 nsec
 test_module_attach:PASS:skel_load 0 nsec
 libbpf: prog 'handle_fentry': failed to attach: unknown error (-524)
 libbpf: prog 'handle_fentry': failed to auto-attach: -524
 test_module_attach:FAIL:skel_attach skeleton attach failed: -524
 #167     module_attach:FAIL
 ... ...
 ringbuf_subtest:PASS:skel_open 0 nsec
 ringbuf_subtest:PASS:skel_load 0 nsec
 ringbuf_subtest:PASS:rw_cons_pos 0 nsec
 ringbuf_subtest:PASS:rw_extend 0 nsec
 ringbuf_subtest:PASS:exec_cons_pos_protect 0 nsec
 ringbuf_subtest:PASS:unmap_rw 0 nsec
 ringbuf_subtest:PASS:wr_prod_pos 0 nsec
 ringbuf_subtest:PASS:wr_prod_pos_err 0 nsec
 ringbuf_subtest:PASS:wr_data_page_one 0 nsec
 ringbuf_subtest:PASS:wr_data_page_one_err 0 nsec
 ringbuf_subtest:PASS:wr_data_page_two 0 nsec
 ringbuf_subtest:PASS:wr_data_page_all 0 nsec
 ringbuf_subtest:PASS:ro_prod_pos 0 nsec
 ringbuf_subtest:PASS:write_protect 0 nsec
 ringbuf_subtest:PASS:exec_protect 0 nsec
 ringbuf_subtest:PASS:ro_remap 0 nsec
 ringbuf_subtest:PASS:unmap_ro 0 nsec
 ringbuf_subtest:PASS:ro_prod_pos 0 nsec
 ringbuf_subtest:PASS:write_protect 0 nsec
 ringbuf_subtest:PASS:exec_protect 0 nsec
 ringbuf_subtest:PASS:ro_remap 0 nsec
 ringbuf_subtest:PASS:unmap_ro 0 nsec
 ringbuf_subtest:PASS:ringbuf_create 0 nsec
 ringbuf_subtest:FAIL:skel_attach skeleton attachment failed: -1
 #277/1   ringbuf/ringbuf:FAIL
 #277/2   ringbuf/ringbuf_n:SKIP
 #277/3   ringbuf/ringbuf_map_key:SKIP
 #277     ringbuf:FAIL
 ... ...
 test_test_bprm_opts:PASS:skel_load 0 nsec
 libbpf: prog 'secure_exec': failed to attach: unknown error (-524)
 libbpf: prog 'secure_exec': failed to auto-attach: -524
 test_test_bprm_opts:FAIL:attach attach failed: -524
 #382     test_bprm_opts:FAIL
 ... ...
 test_test_ima:PASS:skel_load 0 nsec
 test_test_ima:PASS:ringbuf 0 nsec
 libbpf: prog 'bprm_committed_creds': failed to attach: \
					unknown error (-524)
 libbpf: prog 'bprm_committed_creds': failed to auto-attach: -524
 test_test_ima:FAIL:attach attach failed: -524
 #384     test_ima:FAIL
 ... ...
 test_trace_ext:PASS:setup 0 nsec
 test_trace_ext:PASS:setup 0 nsec
 test_trace_ext:PASS:setup 0 nsec
 test_trace_ext:PASS:setup 0 nsec
 libbpf: prog 'test_pkt_md_access_new': failed to attach: \
					unknown error (-524)

libbpf: prog 'test_pkt_md_access_new': failed to auto-attach: -524 test_trace_ext:FAIL:setup freplace/test_pkt_md_access attach failed: -524
#397 trace_ext:FAIL
'''

This patch uses ASSERT_OK() instead of CHECK() to skip these "ENOTSUPP" errors. With this change, the new output of these selftests look like:

'''

 #77/1    d_path/basic:SKIP
 #77/2    d_path/check_rdonly_mem:OK
 #77/3    d_path/check_alloc_mem:OK
 #77      d_path:OK (SKIP: 1/3)
 ... ...
 #167     module_attach:SKIP
 ... ...
 #277/1   ringbuf/ringbuf:SKIP
 #277/2   ringbuf/ringbuf_n:SKIP
 #277/3   ringbuf/ringbuf_map_key:SKIP
 #277     ringbuf:SKIP

... ...
#382 test_bprm_opts:SKIP
... ...
#384 test_ima:SKIP
... ...
#397 trace_ext:SKIP
'''

---
 tools/testing/selftests/bpf/prog_tests/d_path.c         | 2 +-
 tools/testing/selftests/bpf/prog_tests/module_attach.c  | 2 +-
 tools/testing/selftests/bpf/prog_tests/ringbuf.c        | 2 +-
 tools/testing/selftests/bpf/prog_tests/test_bprm_opts.c | 2 +-
 tools/testing/selftests/bpf/prog_tests/test_ima.c       | 2 +-
 tools/testing/selftests/bpf/prog_tests/trace_ext.c      | 2 +-
 6 files changed, 6 insertions(+), 6 deletions(-)
tools/testing/selftests/bpf/prog_tests/d_path.c +1 -1
index ccc768592e66..78110075b485 100644
@@ -129,7 +129,7 @@ static void test_d_path_basic(void)
 		goto cleanup;
 
 	err = test_d_path__attach(skel);
-	if (CHECK(err, "setup", "attach failed: %d\n", err))
+	if (!ASSERT_OK(err, "setup"))
 		goto cleanup;
 
 	bss = skel->bss;
tools/testing/selftests/bpf/prog_tests/module_attach.c +1 -1
index 6d391d95f96e..4aab747ad202 100644
@@ -62,7 +62,7 @@ void test_module_attach(void)
 	bss = skel->bss;
 
 	err = test_module_attach__attach(skel);
-	if (CHECK(err, "skel_attach", "skeleton attach failed: %d\n", err))
+	if (!ASSERT_OK(err, "skel_attach"))
 		goto cleanup;
 
 	/* trigger tracepoint */
tools/testing/selftests/bpf/prog_tests/ringbuf.c +1 -1
index 4c6f42dae409..ee7deb76b60a 100644
@@ -161,7 +161,7 @@ static void ringbuf_subtest(void)
 		goto cleanup;
 
 	err = test_ringbuf_lskel__attach(skel);
-	if (CHECK(err, "skel_attach", "skeleton attachment failed: %d\n", err))
+	if (!ASSERT_OK(err, "skel_attach"))
 		goto cleanup;
 
 	trigger_samples();
tools/testing/selftests/bpf/prog_tests/test_bprm_opts.c +1 -1
index a0054019e677..40a86a303c1a 100644
@@ -88,7 +88,7 @@ void test_test_bprm_opts(void)
 		goto close_prog;
 
 	err = bprm_opts__attach(skel);
-	if (CHECK(err, "attach", "attach failed: %d\n", err))
+	if (!ASSERT_OK(err, "attach"))
 		goto close_prog;
 
 	/* Run the test with the secureexec bit unset */
tools/testing/selftests/bpf/prog_tests/test_ima.c +1 -1
index 810b14981c2e..2a6c388fe29d 100644
@@ -83,7 +83,7 @@ void test_test_ima(void)
 		goto close_prog;
 
 	err = ima__attach(skel);
-	if (CHECK(err, "attach", "attach failed: %d\n", err))
+	if (!ASSERT_OK(err, "attach"))
 		goto close_prog;
 
 	measured_dir = mkdtemp(measured_dir_template);
tools/testing/selftests/bpf/prog_tests/trace_ext.c +1 -1
index aabdff7bea3e..d006c0b91178 100644
@@ -60,7 +60,7 @@ void test_trace_ext(void)
 	}
 
 	err = test_trace_ext__attach(skel_ext);
-	if (CHECK(err, "setup", "freplace/test_pkt_md_access attach failed: %d\n", err))
+	if (!ASSERT_OK(err, "setup replace/test_pkt_md_access attach"))
 		goto cleanup;
 
 	prog = skel_ext->progs.test_pkt_md_access_new;
Signature · 1 line
2.43.0
#4 lore raw

PATCH 4/6 selftests/bpf: Null checks for link in bpf_tcp_ca

In reply to Geliang Tang

From: Geliang Tang <[email protected]>

Run bpf_tcp_ca selftests (./test_progs -t bpf_tcp_ca) on a Loongarch platform, some "Segmentation fault" errors occur:

'''
test_dctcp:PASS:bpf_dctcp__open_and_load 0 nsec test_dctcp:FAIL:bpf_map__attach_struct_ops unexpected error: -524
#29/1 bpf_tcp_ca/dctcp:FAIL
test_cubic:PASS:bpf_cubic__open_and_load 0 nsec test_cubic:FAIL:bpf_map__attach_struct_ops unexpected error: -524
#29/2 bpf_tcp_ca/cubic:FAIL
test_dctcp_fallback:PASS:dctcp_skel 0 nsec test_dctcp_fallback:PASS:bpf_dctcp__load 0 nsec test_dctcp_fallback:FAIL:dctcp link unexpected error: -524
#29/4 bpf_tcp_ca/dctcp_fallback:FAIL
test_write_sk_pacing:PASS:open_and_load 0 nsec test_write_sk_pacing:FAIL:attach_struct_ops unexpected error: -524
#29/6 bpf_tcp_ca/write_sk_pacing:FAIL
test_update_ca:PASS:open 0 nsec test_update_ca:FAIL:attach_struct_ops unexpected error: -524

 settcpca:FAIL:setsockopt unexpected setsockopt: \
					actual -1 == expected -1
 (network_helpers.c:99: errno: No such file or directory) \
					Failed to call post_socket_cb
 start_test:FAIL:start_server_str unexpected start_server_str: \
					actual -1 == expected -1

test_update_ca:FAIL:ca1_ca1_cnt unexpected ca1_ca1_cnt: \
actual 0 <= expected 0
#29/9 bpf_tcp_ca/update_ca:FAIL
#29 bpf_tcp_ca:FAIL
Caught signal #11!
Stack trace:
./test_progs(crash_handler+0x28)[0x5555567ed91c] linux-vdso.so.1(__vdso_rt_sigreturn+0x0)[0x7ffffee408b0] ./test_progs(bpf_link__update_map+0x80)[0x555556824a78] ./test_progs(+0x94d68)[0x5555564c4d68] ./test_progs(test_bpf_tcp_ca+0xe8)[0x5555564c6a88] ./test_progs(+0x3bde54)[0x5555567ede54] ./test_progs(main+0x61c)[0x5555567efd54] /usr/lib64/libc.so.6(+0x22208)[0x7ffff2aaa208] /usr/lib64/libc.so.6(__libc_start_main+0xac)[0x7ffff2aaa30c] ./test_progs(_start+0x48)[0x55555646bca8] Segmentation fault
'''

This is because "link" returned by bpf_map__attach_struct_ops() is NULL in this case. test_progs crashs when this NULL link passes to bpf_link__update_map(). This patch adds NULL checks for all links in bpf_tcp_ca to fix these errors. If "link" is NULL, goto the newly added label "err" to destroy the skel.

v2:
- use "goto err" instead of "return" as Eduard suggested.

---
 .../selftests/bpf/prog_tests/bpf_tcp_ca.c        | 16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)
tools/testing/selftests/bpf/prog_tests/bpf_tcp_ca.c +12 -4
index fa2efb246d3b..45a21a064437 100644
@@ -407,7 +407,8 @@ static void test_update_ca(void)
 		return;
 
 	link = bpf_map__attach_struct_ops(skel->maps.ca_update_1);
-	ASSERT_OK_PTR(link, "attach_struct_ops");
+	if (!ASSERT_OK_PTR(link, "attach_struct_ops"))
+		goto err;
 
 	do_test(&opts);
 	saved_ca1_cnt = skel->bss->ca1_cnt;
@@ -421,6 +422,7 @@ static void test_update_ca(void)
 	ASSERT_GT(skel->bss->ca2_cnt, 0, "ca2_ca2_cnt");
 
 	bpf_link__destroy(link);
+err:
 	tcp_ca_update__destroy(skel);
 }
 
@@ -443,7 +445,8 @@ static void test_update_wrong(void)
 		return;
 
 	link = bpf_map__attach_struct_ops(skel->maps.ca_update_1);
-	ASSERT_OK_PTR(link, "attach_struct_ops");
+	if (!ASSERT_OK_PTR(link, "attach_struct_ops"))
+		goto err;
 
 	do_test(&opts);
 	saved_ca1_cnt = skel->bss->ca1_cnt;
@@ -456,6 +459,7 @@ static void test_update_wrong(void)
 	ASSERT_GT(skel->bss->ca1_cnt, saved_ca1_cnt, "ca2_ca1_cnt");
 
 	bpf_link__destroy(link);
+err:
 	tcp_ca_update__destroy(skel);
 }
 
@@ -480,7 +484,8 @@ static void test_mixed_links(void)
 	ASSERT_OK_PTR(link_nl, "attach_struct_ops_nl");
 
 	link = bpf_map__attach_struct_ops(skel->maps.ca_update_1);
-	ASSERT_OK_PTR(link, "attach_struct_ops");
+	if (!ASSERT_OK_PTR(link, "attach_struct_ops"))
+		goto err;
 
 	do_test(&opts);
 	ASSERT_GT(skel->bss->ca1_cnt, 0, "ca1_ca1_cnt");
@@ -489,6 +494,7 @@ static void test_mixed_links(void)
 	ASSERT_ERR(err, "update_map");
 
 	bpf_link__destroy(link);
+err:
 	bpf_link__destroy(link_nl);
 	tcp_ca_update__destroy(skel);
 }
@@ -532,7 +538,8 @@ static void test_link_replace(void)
 	bpf_link__destroy(link);
 
 	link = bpf_map__attach_struct_ops(skel->maps.ca_update_2);
-	ASSERT_OK_PTR(link, "attach_struct_ops_2nd");
+	if (!ASSERT_OK_PTR(link, "attach_struct_ops_2nd"))
+		goto err;
 
 	/* BPF_F_REPLACE with a wrong old map Fd. It should fail!
 	 *
@@ -555,6 +562,7 @@ static void test_link_replace(void)
 
 	bpf_link__destroy(link);
 
+err:
 	tcp_ca_update__destroy(skel);
 }
 
Signature · 1 line
2.43.0
#5 lore raw

PATCH 5/6 selftests/bpf: Skip ENOTSUPP in ASSERT_OK_PTR

In reply to Geliang Tang

From: Geliang Tang <[email protected]>

Although the "Segmentation fault" errors are fixed in the last commit, run bpf_tcp_ca selftests (./test_progs -t bpf_tcp_ca) on a Loongarch platform, still some other "ENOTSUPP" (-524) errors left since lacking BPF trampoline on Loongarch:

'''
test_dctcp:PASS:bpf_dctcp__open_and_load 0 nsec test_dctcp:FAIL:bpf_map__attach_struct_ops unexpected error: -524
#29/1 bpf_tcp_ca/dctcp:FAIL
test_cubic:PASS:bpf_cubic__open_and_load 0 nsec test_cubic:FAIL:bpf_map__attach_struct_ops unexpected error: -524
#29/2 bpf_tcp_ca/cubic:FAIL
#29/3 bpf_tcp_ca/invalid_license:OK
test_dctcp_fallback:PASS:dctcp_skel 0 nsec test_dctcp_fallback:PASS:bpf_dctcp__load 0 nsec test_dctcp_fallback:FAIL:dctcp link unexpected error: -524
#29/4 bpf_tcp_ca/dctcp_fallback:FAIL
#29/5 bpf_tcp_ca/rel_setsockopt:OK
test_write_sk_pacing:PASS:open_and_load 0 nsec test_write_sk_pacing:FAIL:attach_struct_ops unexpected error: -524

 #29/6    bpf_tcp_ca/write_sk_pacing:FAIL
 #29/7    bpf_tcp_ca/incompl_cong_ops:OK
 #29/8    bpf_tcp_ca/unsupp_cong_op:OK

test_update_ca:PASS:open 0 nsec test_update_ca:FAIL:attach_struct_ops unexpected error: -524
#29/9 bpf_tcp_ca/update_ca:FAIL
test_update_wrong:PASS:open 0 nsec test_update_wrong:FAIL:attach_struct_ops unexpected error: -524
#29/10 bpf_tcp_ca/update_wrong:FAIL
test_mixed_links:PASS:open 0 nsec test_mixed_links:FAIL:attach_struct_ops_nl unexpected error: -524 test_mixed_links:FAIL:attach_struct_ops unexpected error: -524
#29/11 bpf_tcp_ca/mixed_links:FAIL
test_multi_links:PASS:open 0 nsec test_multi_links:FAIL:attach_struct_ops_1st unexpected error: -524 test_multi_links:FAIL:attach_struct_ops_2nd unexpected error: -524
#29/12 bpf_tcp_ca/multi_links:FAIL
test_link_replace:PASS:open 0 nsec test_link_replace:FAIL:attach_struct_ops_1st unexpected error: -524 test_link_replace:FAIL:attach_struct_ops_2nd unexpected error: -524
#29/13 bpf_tcp_ca/link_replace:FAIL
#29/14 bpf_tcp_ca/tcp_ca_kfunc:OK
test_cc_cubic:PASS:bpf_cc_cubic__open_and_load 0 nsec test_cc_cubic:FAIL:bpf_map__attach_struct_ops unexpected error: -524
#29/15 bpf_tcp_ca/cc_cubic:FAIL
#29 bpf_tcp_ca:FAIL
'''

Just like in ASSERT_OK(), this patch skips ENOTSUPP (524) and ENOTSUP (95) in ASSERT_OK_PTR() too. With this change, the new output of bpf_tcp_ca selftests look like:

'''

 #29/1    bpf_tcp_ca/dctcp:SKIP
 #29/2    bpf_tcp_ca/cubic:SKIP
 #29/3    bpf_tcp_ca/invalid_license:OK
 #29/4    bpf_tcp_ca/dctcp_fallback:SKIP
 #29/5    bpf_tcp_ca/rel_setsockopt:OK
 #29/6    bpf_tcp_ca/write_sk_pacing:SKIP
 #29/7    bpf_tcp_ca/incompl_cong_ops:OK
 #29/8    bpf_tcp_ca/unsupp_cong_op:OK
 #29/9    bpf_tcp_ca/update_ca:SKIP
 #29/10   bpf_tcp_ca/update_wrong:SKIP
 #29/11   bpf_tcp_ca/mixed_links:SKIP
 #29/12   bpf_tcp_ca/multi_links:SKIP
 #29/13   bpf_tcp_ca/link_replace:SKIP
 #29/14   bpf_tcp_ca/tcp_ca_kfunc:OK
 #29/15   bpf_tcp_ca/cc_cubic:SKIP
 #29      bpf_tcp_ca:OK (SKIP: 10/15)

'''

---
 tools/testing/selftests/bpf/test_progs.h | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)
tools/testing/selftests/bpf/test_progs.h +4 -1
index 25f6976c08b5..464aa12feada 100644
@@ -369,7 +369,10 @@ int test__join_cgroup(const char *path);
 	const void *___res = (ptr);					\
 	int ___err = libbpf_get_error(___res);				\
 	bool ___ok = ___err == 0;					\
-	CHECK(!___ok, (name), "unexpected error: %d\n", ___err);	\
+	if (___err == -ENOTSUPP || ___err == -ENOTSUP)			\
+		test__skip();						\
+	else								\
+		CHECK(!___ok, (name), "unexpected error: %d\n", ___err);\
 	___ok;								\
 })
 
Signature · 1 line
2.43.0
#6 lore raw

PATCH 6/6 selftests/bpf: Skip ENOTSUPP in ASSERT_GE

In reply to Geliang Tang

From: Geliang Tang <[email protected]>

There are still some "ENOTSUPP" (-524) errors left when running BPF selftests on a Loongarch platform since ASSERT_GE() are used there to check the return values, not ASSERT_OK():

'''
test_bpf_cookie:PASS:skel_open 0 nsec

 #17/1    bpf_cookie/kprobe:OK
 #17/2    bpf_cookie/multi_kprobe_link_api:OK
 #17/3    bpf_cookie/multi_kprobe_attach_api:OK
 #17/4    bpf_cookie/uprobe:OK
 #17/5    bpf_cookie/multi_uprobe_attach_api:OK
 #17/6    bpf_cookie/tracepoint:OK
 #17/7    bpf_cookie/perf_event:OK
 tracing_subtest:FAIL:fentry.link_create unexpected fentry.link_create: \
						actual -524 < expected 0
 #17/8    bpf_cookie/trampoline:FAIL
 lsm_subtest:FAIL:lsm.link_create unexpected lsm.link_create: \
						actual -524 < expected 0
 #17/9    bpf_cookie/lsm:FAIL
 #17/10   bpf_cookie/tp_btf:OK
 #17/11   bpf_cookie/raw_tp:OK
 #17      bpf_cookie:FAIL

... ...
test_module_fentry_shadow:PASS:load_vmlinux_btf 0 nsec test_module_fentry_shadow:PASS:get_bpf_testmod_btf_fd 0 nsec test_module_fentry_shadow:PASS:btf_get_from_fd 0 nsec test_module_fentry_shadow:PASS:btf_find_by_name 0 nsec test_module_fentry_shadow:PASS:btf_find_by_name 0 nsec test_module_fentry_shadow:PASS:bpf_prog_load 0 nsec test_module_fentry_shadow:FAIL:bpf_link_create unexpected \
bpf_link_create: actual -524 < expected 0
#168 module_fentry_shadow:FAIL
'''

Just like in ASSERT_OK(), this patch skips ENOTSUPP (524) and ENOTSUP (95) in ASSERT_GT() too. With this change, the new output of these selftests look like:

'''

 #17/1    bpf_cookie/kprobe:OK
 #17/2    bpf_cookie/multi_kprobe_link_api:OK
 #17/3    bpf_cookie/multi_kprobe_attach_api:OK
 #17/4    bpf_cookie/uprobe:OK
 #17/5    bpf_cookie/multi_uprobe_attach_api:OK
 #17/6    bpf_cookie/tracepoint:OK
 #17/7    bpf_cookie/perf_event:OK
 #17/8    bpf_cookie/trampoline:SKIP
 #17/9    bpf_cookie/lsm:SKIP
 #17/10   bpf_cookie/tp_btf:SKIP
 #17/11   bpf_cookie/raw_tp:SKIP
 #17      bpf_cookie:OK (SKIP: 4/11)

... ...
#168 module_fentry_shadow:SKIP
'''

---
 tools/testing/selftests/bpf/test_progs.h | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)
tools/testing/selftests/bpf/test_progs.h +7 -3
index 464aa12feada..8a5ce360aa1c 100644
@@ -294,9 +294,13 @@ int test__join_cgroup(const char *path);
 	typeof(actual) ___act = (actual);				\
 	typeof(expected) ___exp = (expected);				\
 	bool ___ok = ___act >= ___exp;					\
-	CHECK(!___ok, (name),						\
-	      "unexpected %s: actual %lld < expected %lld\n",		\
-	      (name), (long long)(___act), (long long)(___exp));	\
+	if (___act == -ENOTSUPP || ___act == -ENOTSUP ||		\
+	    errno == ENOTSUPP || errno == ENOTSUP)			\
+		test__skip();						\
+	else								\
+		CHECK(!___ok, (name),					\
+		      "unexpected %s: actual %lld < expected %lld\n",	\
+		      (name), (long long)(___act), (long long)(___exp));\
 	___ok;								\
 })
 
Signature · 1 line
2.43.0
#7 lore raw

Re: [PATCH 6/6] selftests/bpf: Skip ENOTSUPP in ASSERT_GE

Quoted 68 lines · Geliang Tang

From: Geliang Tang <[email protected]>

There are still some "ENOTSUPP" (-524) errors left when running BPF selftests on a Loongarch platform since ASSERT_GE() are used there to check the return values, not ASSERT_OK():

'''
test_bpf_cookie:PASS:skel_open 0 nsec

 #17/1    bpf_cookie/kprobe:OK
 #17/2    bpf_cookie/multi_kprobe_link_api:OK
 #17/3    bpf_cookie/multi_kprobe_attach_api:OK
 #17/4    bpf_cookie/uprobe:OK
 #17/5    bpf_cookie/multi_uprobe_attach_api:OK
 #17/6    bpf_cookie/tracepoint:OK
 #17/7    bpf_cookie/perf_event:OK
 tracing_subtest:FAIL:fentry.link_create unexpected fentry.link_create: \
                                                actual -524 < expected 0
 #17/8    bpf_cookie/trampoline:FAIL
 lsm_subtest:FAIL:lsm.link_create unexpected lsm.link_create: \
                                                actual -524 < expected 0
 #17/9    bpf_cookie/lsm:FAIL
 #17/10   bpf_cookie/tp_btf:OK
 #17/11   bpf_cookie/raw_tp:OK
 #17      bpf_cookie:FAIL

... ...
test_module_fentry_shadow:PASS:load_vmlinux_btf 0 nsec test_module_fentry_shadow:PASS:get_bpf_testmod_btf_fd 0 nsec test_module_fentry_shadow:PASS:btf_get_from_fd 0 nsec test_module_fentry_shadow:PASS:btf_find_by_name 0 nsec test_module_fentry_shadow:PASS:btf_find_by_name 0 nsec test_module_fentry_shadow:PASS:bpf_prog_load 0 nsec test_module_fentry_shadow:FAIL:bpf_link_create unexpected \
bpf_link_create: actual -524 < expected 0
#168 module_fentry_shadow:FAIL
'''

Just like in ASSERT_OK(), this patch skips ENOTSUPP (524) and ENOTSUP (95) in ASSERT_GT() too. With this change, the new output of these selftests look like:

'''

 #17/1    bpf_cookie/kprobe:OK
 #17/2    bpf_cookie/multi_kprobe_link_api:OK
 #17/3    bpf_cookie/multi_kprobe_attach_api:OK
 #17/4    bpf_cookie/uprobe:OK
 #17/5    bpf_cookie/multi_uprobe_attach_api:OK
 #17/6    bpf_cookie/tracepoint:OK
 #17/7    bpf_cookie/perf_event:OK
 #17/8    bpf_cookie/trampoline:SKIP
 #17/9    bpf_cookie/lsm:SKIP
 #17/10   bpf_cookie/tp_btf:SKIP
 #17/11   bpf_cookie/raw_tp:SKIP
 #17      bpf_cookie:OK (SKIP: 4/11)

... ...
#168 module_fentry_shadow:SKIP
'''

---
 tools/testing/selftests/bpf/test_progs.h | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)
tools/testing/selftests/bpf/test_progs.h +0 -0
index 464aa12feada..8a5ce360aa1c 100644

tools/testing/selftests/bpf/test_progs.h int test__join_cgroup(const char *path); · line 299

Quoted 9 lines
tools/testing/selftests/bpf/test_progs.h +3 -3
@@ -294,9 +294,13 @@ int test__join_cgroup(const char *path);
        typeof(actual) ___act = (actual);                               \
        typeof(expected) ___exp = (expected);                           \
        bool ___ok = ___act >= ___exp;                                  \
-       CHECK(!___ok, (name),                                           \
-             "unexpected %s: actual %lld < expected %lld\n",           \
-             (name), (long long)(___act), (long long)(___exp));        \
+       if (___act == -ENOTSUPP || ___act == -ENOTSUP ||                \
+           errno == ENOTSUPP || errno == ENOTSUP)                      \
+               test__skip();                                           \

absolutely not, if ENOTSUP or ENOTSUPP is special for some tests, that should be handled explicitly. This is not correct in general and we should not just silently skip some test on such errors.

Quoted 10 lines
tools/testing/selftests/bpf/test_progs.h +4 -1
+       else                                                            \
+               CHECK(!___ok, (name),                                   \
+                     "unexpected %s: actual %lld < expected %lld\n",   \
+                     (name), (long long)(___act), (long long)(___exp));\
        ___ok;                                                          \
 })
 
--

2.43.0

#8 lore raw
In reply to Geliang Tang
Quoted 8 lines · Geliang Tang

From: Geliang Tang <[email protected]>

BPF selftests seem to have not been fully tested on Loongarch platforms.
There are so many "ENOTSUPP" (-524) errors when running BPF selftests on
them since lacking BPF trampoline on Loongarch.

Quoted 6 lines

For these "ENOTSUPP" tests, it's better to skip them, instead of reporting
some "ENOTSUPP" errors. This patchset skips ENOTSUPP in ASSERT_OK/ ASSERT_OK_PTR/ASSERT_GE helpers to fix them. This is useful for running BPF
selftests for other architectures too.

Superseded. v2 is just sent out.

Thanks,
-Geliang

Quoted 25 lines

Geliang Tang (6):
  selftests/bpf: Define ENOTSUPP in testing_helpers.h selftests/bpf: Skip ENOTSUPP in ASSERT_OK selftests/bpf: Use ASSERT_OK to skip ENOTSUPP selftests/bpf: Null checks for link in bpf_tcp_ca selftests/bpf: Skip ENOTSUPP in ASSERT_OK_PTR selftests/bpf: Skip ENOTSUPP in ASSERT_GE

 .../selftests/bpf/prog_tests/bpf_tcp_ca.c     | 20 +++++++++------- .../testing/selftests/bpf/prog_tests/d_path.c |  2 +- .../selftests/bpf/prog_tests/lsm_cgroup.c     | 10 +------- .../selftests/bpf/prog_tests/module_attach.c  |  2 +- .../selftests/bpf/prog_tests/ringbuf.c        |  2 +- .../selftests/bpf/prog_tests/sock_addr.c      |  4 ---- .../selftests/bpf/prog_tests/test_bprm_opts.c |  2 +- .../selftests/bpf/prog_tests/test_ima.c       |  2 +- .../selftests/bpf/prog_tests/trace_ext.c      |  2 +- tools/testing/selftests/bpf/test_maps.c       |  4 ---- tools/testing/selftests/bpf/test_progs.h      | 24 ++++++++++++++--- --
 tools/testing/selftests/bpf/test_verifier.c   |  4 ---- tools/testing/selftests/bpf/testing_helpers.h |  4 ++++

 13 files changed, 41 insertions(+), 41 deletions(-)