Skip to contentSkip to conversation

OpenBMC version 2.7 run in target S2600WF shows BMC not ready(xyz.openbmc_project.State.BMC.BMCState.NotReady)

DISCUSSION Jiang, Hongjiang (NSB - CN/Hangzhou) 3 participants 5 messages Aug 16, 2019 – Aug 19, 2019 1 message not in the archive

lore
Share & tools
lore
#0 lore raw

Hi,

I am new to OpenBMC😊

Currently I compiled OpenBMC tag 2.7-0 with machine target S2600WF( as I have only wolfpass server in hand), and flash it to a real S2600WF server. After it boot up I try to power on the host but found the “Server power operations” page shows “There are no power operations to display”, and In shell the obmcutil state shows following:

root@s2600wf:~# obmcutil state
CurrentBMCState     : xyz.openbmc_project.State.BMC.BMCState.NotReady
CurrentPowerState   : xyz.openbmc_project.State.Chassis.PowerState.Off
Error finding '/xyz/openbmc_project/state/host0' service: No such file or directory

And “obmcutil bmcstate” shows following:

root@s2600wf:~# obmcutil bmcstate
CurrentBMCState     : xyz.openbmc_project.State.BMC.BMCState.NotReady

And systemctl –list-jobs shows following:

root@s2600wf:~# systemctl list-jobs  --no-pager
JOB UNIT                                                            TYPE  STATE
140 [email protected]                                start waiting
138 [email protected]                           start waiting
165 [email protected]                        start waiting
113 mapper-wait@-xyz-openbmc_project-state-host0.service            start running
99 obmc-led-group-start@bmc_booted.service                         start waiting
173 xyz.openbmc_project.State.Host.service                          start waiting
144 [email protected]                                   start waiting
142 [email protected]                             start waiting
146 [email protected]                              start waiting
136 [email protected]                          start waiting
  1 multi-user.target                                               start waiting
150 mapper-wait@-xyz-openbmc_project-Chassis-Control-Power0.service start running
135 [email protected]                                        start waiting
148 [email protected]                                    start waiting
110 xyz.openbmc_project.Time.Manager.service                        start waiting

Could someone help to give some guiding about investigation direction? Thanks.

Best Regards,
Jiang Hongjiang
________________________________
Nokia

Jiang Hongjiang

• +86 13666669403

________________________________

A message that is not in the archive (sent off-list or not yet received): [email protected]

#2 lore raw

Hi,

Thanks for your info. I will check this package and see if I can do some hacking😊

Best Regards,
Jiang Hongjiang

Nokia

Jiang Hongjiang

+86 13666669403

-----Original Message-----
From: David Müller (ELSOFT AG) <[email protected]>
Sent: Friday, August 16, 2019 3:05 PM
To: Jiang, Hongjiang (NSB - CN/Hangzhou) <[email protected]>
Cc: [email protected]
Subject: Re: OpenBMC version 2.7 run in target S2600WF shows BMC not ready(xyz.openbmc_project.State.BMC.BMCState.NotReady)

Hello

Quoted 2 lines · Hongjiang (NSB - CN/Hangzhou)

Currently I compiled OpenBMC tag 2.7-0 with machine target S2600WF( as I have only wolfpass server in hand), and flash it to a real S2600WF server.

As far as I can see support for the Intel s2600wf board is currently broken as it uses the (no longer working) x86-power-control package.

Please see https://github.com/openbmc/x86-power-control/issues/1 for more details.

Dave

#3 lore raw

Check out the Intel development repo at https://github.com/intel-bmc. You should be able to find what you need there.
This is the Intel repository that we're working on getting upstreamed which takes a little longer.

James.

Quoted 45 lines · Hongjiang (NSB - CN/Hangzhou)

Hi,

Thanks for your info. I will check this package and see if I can do some hacking😊

Best Regards,
Jiang Hongjiang

Nokia

Jiang Hongjiang

+86 13666669403

-----Original Message-----
From: David Müller (ELSOFT AG) <[email protected]>
Sent: Friday, August 16, 2019 3:05 PM
To: Jiang, Hongjiang (NSB - CN/Hangzhou) <[email protected]>
Cc: [email protected]
Subject: Re: OpenBMC version 2.7 run in target S2600WF shows BMC not ready(xyz.openbmc_project.State.BMC.BMCState.NotReady)

Hello

Quoted 2 lines · Hongjiang (NSB - CN/Hangzhou)

Currently I compiled OpenBMC tag 2.7-0 with machine target S2600WF( as I have only wolfpass server in hand), and flash it to a real S2600WF

server.

As far as I can see support for the Intel s2600wf board is currently broken as it uses the (no longer working) x86-power-control package.

Please see https://github.com/openbmc/x86-power-control/issues/1 for more details.

Dave

#4 lore raw

Hi,
OK, thanks for your info, I will take that as a reference.

Best Regards,
Jiang Hongjiang
________________________________
Nokia

Jiang Hongjiang

• +86 13666669403

________________________________

From: James Mihm <[email protected]>
Sent: Saturday, August 17, 2019 12:45 PM
To: Jiang, Hongjiang (NSB - CN/Hangzhou) <[email protected]>
Cc: David Müller (ELSOFT AG) <[email protected]>; [email protected]
Subject: Re: OpenBMC version 2.7 run in target S2600WF shows BMC not ready(xyz.openbmc_project.State.BMC.BMCState.NotReady)

Check out the Intel development repo at https://github.com/intel-bmc. You should be able to find what you need there. This is the Intel repository that we're working on getting upstreamed which takes a little longer.

James.

On Fri, Aug 16, 2019 at 1:24 AM Jiang, Hongjiang (NSB - CN/Hangzhou) <[email protected]<mailto:[email protected]>> wrote:
Hi,

Thanks for your info. I will check this package and see if I can do some hacking😊

Best Regards,
Jiang Hongjiang

Nokia

Jiang Hongjiang

+86 13666669403

-----Original Message-----
From: David Müller (ELSOFT AG) <[email protected]<mailto:[email protected]>>
Sent: Friday, August 16, 2019 3:05 PM
To: Jiang, Hongjiang (NSB - CN/Hangzhou) <[email protected]<mailto:[email protected]>>
Cc: [email protected]<mailto:[email protected]>
Subject: Re: OpenBMC version 2.7 run in target S2600WF shows BMC not ready(xyz.openbmc_project.State.BMC.BMCState.NotReady)

Hello

Quoted 2 lines · Hongjiang (NSB - CN/Hangzhou)

Currently I compiled OpenBMC tag 2.7-0 with machine target S2600WF( as I have only wolfpass server in hand), and flash it to a real S2600WF server.

As far as I can see support for the Intel s2600wf board is currently broken as it uses the (no longer working) x86-power-control package.

Please see https://github.com/openbmc/x86-power-control/issues/1 for more details.

Dave

#5 lore raw
In reply to James Mihm
Quoted 2 lines · James Mihm

Check out the Intel development repo at https://github.com/intel-bmc. You should be able to find what you need there. This is the Intel repository that we're working on getting upstreamed which takes a little longer.

Prioritizing upstream collaboratively developed code will fix the problem, and result in higher quality to boot. The slight increase in design/review time (in a healthy community) pays for itself in not having to maintain two versions of the source.

Kurt Taylor (krtaylor)

Quoted 53 lines

James.

On Fri, Aug 16, 2019 at 1:24 AM Jiang, Hongjiang (NSB - CN/Hangzhou) <[email protected] <mailto:[email protected]>> wrote:

Hi,

Thanks for your info. I will check this package and see if I can do some hacking😊

Best Regards,
Jiang Hongjiang

Nokia

Jiang Hongjiang

+86 13666669403

-----Original Message-----
From: David Müller (ELSOFT AG) <[email protected] <mailto:[email protected]>>
Sent: Friday, August 16, 2019 3:05 PM
To: Jiang, Hongjiang (NSB - CN/Hangzhou) <[email protected] <mailto:[email protected]>>
Cc: [email protected] <mailto:[email protected]>
Subject: Re: OpenBMC version 2.7 run in target S2600WF shows BMC not ready(xyz.openbmc_project.State.BMC.BMCState.NotReady)

Hello

Jiang, Hongjiang (NSB - CN/Hangzhou) wrote:

> Currently I compiled OpenBMC tag 2.7-0 with machine target
S2600WF( as
> I have only wolfpass server in hand), and flash it to a real
S2600WF server.

As far as I can see support for the Intel s2600wf board is currently broken as it uses the (no longer working) x86-power-control package.

Please see https://github.com/openbmc/x86-power-control/issues/1 for more details.

Dave