Skip to contentSkip to conversation

iso9660 mount problem

DISCUSSION Jack Byer 4 participants 13 messages Oct 7, 2009 – Oct 9, 2009

lore
Share & tools
lore

Jack Byer

author
#0 lore raw

I have a CD of a commercial software program that I am attempting to run under wine. The CD works without problems under Windows, but when I mount it on linux the file system appears to be empty (no files or directories). The drive is capable of reading the CD because "strings /dev/cdrom" works.

What would I need to do in order to troubleshoot this problem?

#1 lore raw
Quoted 7 lines · On Wed, 07 Oct 2009 17:22:02 -0500 Jack Byer <[email protected]> wrote:

I have a CD of a commercial software program that I am attempting to run under wine. The CD works without problems under Windows, but when I mount it on linux the file system appears to be empty (no files or directories). The drive is capable of reading the CD because "strings /dev/cdrom" works.

What would I need to do in order to troubleshoot this problem?

Firstly check what occurs if you mount it by hand with -t iso9660 and with -t udf. Secondly check dmesg for any diagnostics from the mount such as corrupt metadata on the CD.

author
#2 lore raw
Quoted 9 lines · Alan Cox
Quoted 6 lines · On Wed, 07 Oct 2009 17:22:02 -0500 Jack Byer <[email protected]> wrote:

I have a CD of a commercial software program that I am attempting to run under wine. The CD works without problems under Windows, but when I mount it on linux the file system appears to be empty (no files or directories). The drive is capable of reading the CD because "strings /dev/cdrom" works.

Quoted 7 lines
Quoted 1 line

What would I need to do in order to troubleshoot this problem?

Firstly check what occurs if you mount it by hand with -t iso9660 and with -t udf. Secondly check dmesg for any diagnostics from the mount such as corrupt metadata on the CD.

It will not mount as UDF:

UDF-fs: No VRS found
UDF-fs: No partition found (1)

As iso9660:

mount -t iso9660 /dev/cdrom /mnt/cdrom
mount: block device /dev/sr0 is write-protected, mounting read-only

dmesg:

ISO 9660 Extensions: Microsoft Joliet Level 1 ISO 9660 Extensions: IEEE_P1282

I tried this on three different machines all with the same result.

#3 lore raw
In reply to Jack Byer
Quoted 7 lines · Jack Byer

I have a CD of a commercial software program that I am attempting to run under wine. The CD works without problems under Windows, but when I mount it on linux the file system appears to be empty (no files or directories). The drive is capable of reading the CD because "strings /dev/cdrom" works.

What would I need to do in order to troubleshoot this problem?

Maybe try mounting with the "-o unhide" option. Or maybe it is a multi-session disc?

author
#4 lore raw
Quoted 11 lines · Paul Hartman
Quoted 7 lines · Jack Byer

I have a CD of a commercial software program that I am attempting to run under wine. The CD works without problems under Windows, but when I mount it on linux the file system appears to be empty (no files or directories). The drive is capable of reading the CD because "strings /dev/cdrom" works.

What would I need to do in order to troubleshoot this problem?

Maybe try mounting with the "-o unhide" option. Or maybe it is a multi-session disc?

-o unhide does not help. Can a factory-pressed disc be multisession? It's not a CD-R

#5 lore raw
Quoted 9 lines · Jack Byer
Quoted 7 lines · Paul Hartman
Quoted 6 lines · Jack Byer

I have a CD of a commercial software program that I am attempting to run under wine. The CD works without problems under Windows, but when I mount it on linux the file system appears to be empty (no files or directories). The drive is capable of reading the CD because "strings /dev/cdrom" works.

Quoted 7 lines
Quoted 4 lines
Quoted 1 line

What would I need to do in order to troubleshoot this problem?

Maybe try mounting with the "-o unhide" option. Or maybe it is a multi-session disc?

-o unhide does not help. Can a factory-pressed disc be multisession? It's not a CD-R

Could you post the header part of the cd? ie:

dd if=/dev/cdrom of=header bs=1k count=32

Quoted 7 lines

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Signature · 2 lines
Regards
dave
author
#6 lore raw
Quoted 4 lines

Could you post the header part of the cd? ie:

dd if=/dev/cdrom of=header bs=1k count=32

#7 lore raw
Quoted 5 lines · Jack Byer
Quoted 4 lines

Could you post the header part of the cd? ie:

dd if=/dev/cdrom of=header bs=1k count=32

Sorry, my mistake, getting the meta data we need at least 64k.

Could you send again the header?

dd if=/dev/cdrom of=header bs=1k count=64

Signature · 2 lines
Regards
dave
#8 lore raw
Quoted 7 lines · Dave Young
Quoted 5 lines · Jack Byer
Quoted 4 lines

Could you post the header part of the cd? ie:

dd if=/dev/cdrom of=header bs=1k count=32

Quoted 7 lines

Sorry, my mistake, getting the meta data we need at least 64k.

Could you send again the header?

dd if=/dev/cdrom of=header bs=1k count=64

From your previous 32k header, run strings header got:

...
Apple_partition_map
HDiscRecording 4.0.3d3
Apple_HFS
Apple
Apple_partition_map
...

So it must be an apple hfs disc, (or hybrid disc?).
Maybe you may try mount it as hfs, this problem is not relevant to iso9660.

Quoted 5 lines

--
Regards
dave

Signature · 2 lines
Regards
dave
author
#9 lore raw
Quoted 2 lines

So it must be an apple hfs disc, (or hybrid disc?).
Maybe you may try mount it as hfs, this problem is not relevant to iso9660.

I can mount the disc as hfsplus but it shows the OS X contents instead of the Windows contents.

#10 lore raw
Quoted 5 lines · Jack Byer
Quoted 2 lines

So it must be an apple hfs disc, (or hybrid disc?).
Maybe you may try mount it as hfs, this problem is not relevant to iso9660.

I can mount the disc as hfsplus but it shows the OS X contents instead of the Windows contents.

Looks like Rosetta Stone :) and i think it is hybrid HFS/iso9660. I can see windows-related filenames in the sample you uploaded, so we know they are out there somewhere. Maybe try this in your mount options (thanks google):

mount -t iso9660 -o norock,map=off

Also, if that doesn't work, do you have CONFIG_JOLIET=y in your kernel .config? Maybe it's needed...

#12 lore raw
In reply to Jack Byer
Quoted 9 lines · Jack Byer
Quoted 7 lines · Paul Hartman
Quoted 6 lines · Jack Byer

I have a CD of a commercial software program that I am attempting to run under wine. The CD works without problems under Windows, but when I mount it on linux the file system appears to be empty (no files or directories). The drive is capable of reading the CD because "strings /dev/cdrom" works.

Quoted 7 lines
Quoted 4 lines
Quoted 1 line

What would I need to do in order to troubleshoot this problem?

Maybe try mounting with the "-o unhide" option. Or maybe it is a multi-session disc?

-o unhide does not help. Can a factory-pressed disc be multisession? It's not a CD-R

Yes (for example "Enhanced CDs" which contain both audio and data tracks). I think the default on MS Windows is to mount the last session on the disc. You should be able to use mount paramater "-o session=x" with x being the session number you want to mount.