Skip to contentSkip to conversation

iommu/s390: Fixes related to attach and aperture handling

PATCH Superseded Niklas Schnelle 2 participants 16 messages Oct 6, 2022 – Oct 7, 2022

Subsystems (3)

v5 of 8 Superseded Latest is v8 →

lore
Share & tools
lore

Niklas Schnelle

author maintainer
#0 lore raw

v5 cover iommu/s390: Fixes related to attach and aperture handling

Hi All,

This is v5 of a follow up to Matt's recent series[0] where he tackled a race that turned out to be outside of the s390 IOMMU driver itself as well as duplicate device attachments. After an internal discussion we came up with what I believe is a cleaner fix. Instead of actively checking for duplicates we instead detach from any previous domain on attach. From my cursory reading of the code this seems to be what the Intel IOMMU driver is doing as well.

Moreover we drop the attempt to re-attach the device to its previous IOMMU domain on failure. This was fragile, unlikely to help and unexpected for calling code. Thanks Jason for the suggestion.

We can also get rid of struct s390_domain_device entirely if we instead thread the list through the attached struct zpci_devs. This saves us from having to allocate during attach and gets rid of one level of indirection during IOMMU operations.

Additionally 3 more fixes have been added in v3 that weren't in v2 of this series. One is for a potential situation where the aperture of a domain could shrink and leave invalid translations. The next one fixes an off by one in checking validity of an IOVA and the last one fixes a wrong value for pgsize_bitmap.

In v4 we also add a patch changing to the map_pages()/unmap_pages() interface in order to prevent a performance regression due to the pgsize_bitmap change.

*Note*:
This series is against the s390 features branch[1] which already contains the bus_next field removal that was part of v2.

It is also available as a branch with the GPG signed tag s390_iommu_fixes_v5 on my niks/linux.git on git.kernel.org[2].

*Open Question*:
Which tree should this go via?

Best regards,
Niklas

Changes since v4:
- Add patch to change to the map_pages()/unmap_pages() API to prevent a performance regression from the pgsize_bitmap change (Robin)
- In patch 1 unregister IOAT on error (Matt)
- Turn the aperture check in attach into a WARN_ON() in patch 3 (Jason)

Changes since v3:
- Drop s390_domain from __s390_iommu_detach_device() (Jason)
- WARN_ON() mismatched domain in s390_iommu_detach_device() (Jason)
- Use __s390_iommu_detach_device() in s390_iommu_release_device() (Jason)
- Make aperture check resistant against overflow (Jason)

Changes since v2:
- The patch removing the unused bus_next field has been spun out and already made it into the s390 feature branch on git.kernel.org
- Make __s390_iommu_detach_device() return void (Jason)
- Remove the re-attach on failure dance as it is unlikely to help and complicates debug and recovery (Jason)
- Ignore attempts to detach from domain that is not the active one
- Add patch to fix potential shrinking of the aperture and use reserved ranges per device instead of the aperture to respect IOVA range restrictions (Jason)
- Add a fix for an off by one error on checking an IOVA against the aperture
- Add a fix for wrong pgsize_bitmap

Changes since v1:
- After patch 3 we don't have to search in the devices list on detach as we alreadz have hold of the zpci_dev (Jason)
- Add a WARN_ON() if somehow ended up detaching a device from a domain that isn't the device's current domain.
- Removed the iteration and list delete from s390_domain_free() instead just WARN_ON() when we're freeing without having detached
- The last two points should help catching sequencing errors much more quickly in the future.

[0] https://lore.kernel.org/linux-iommu/[email protected]/
[1] https://git.kernel.org/pub/scm/linux/kernel/git/s390/linux.git/
[2] https://git.kernel.org/pub/scm/linux/kernel/git/niks/linux.git

Niklas Schnelle (6):
iommu/s390: Fix duplicate domain attachments iommu/s390: Get rid of s390_domain_device iommu/s390: Fix potential s390_domain aperture shrinking iommu/s390: Fix incorrect aperture check iommu/s390: Fix incorrect pgsize_bitmap iommu/s390: Implement map_pages()/unmap_pages() instead of

    map()/unmap()
 arch/s390/include/asm/pci.h |   1 +
 drivers/iommu/s390-iommu.c  | 221 +++++++++++++++++-------------------
 2 files changed, 107 insertions(+), 115 deletions(-)
Signature · 1 line
2.34.1
author maintainer
#1 lore raw

PATCH v5 1/6 iommu/s390: Fix duplicate domain attachments

Since commit fa7e9ecc5e1c ("iommu/s390: Tolerate repeat attach_dev calls") we can end up with duplicates in the list of devices attached to a domain. This is inefficient and confusing since only one domain can actually be in control of the IOMMU translations for a device. Fix this by detaching the device from the previous domain, if any, on attach. Add a WARN_ON() in case we still have attached devices on freeing the domain. While here remove the re-attach on failure dance as it was determined to be unlikely to help and may confuse debug and recovery.

Fixes fa7e9ecc5e1c ("iommu/s390: Tolerate repeat attach_dev calls")

---
v4->v5:
- Unregister IOAT and set zdev->dma_table on error (Matt)

 drivers/iommu/s390-iommu.c | 102 ++++++++++++++++---------------------
 1 file changed, 43 insertions(+), 59 deletions(-)
drivers/iommu/s390-iommu.c +43 -59
index c898bcbbce11..938998c46bd3 100644
@@ -79,10 +79,36 @@ static void s390_domain_free(struct iommu_domain *domain)
 {
 	struct s390_domain *s390_domain = to_s390_domain(domain);
 
+	WARN_ON(!list_empty(&s390_domain->devices));
 	dma_cleanup_tables(s390_domain->dma_table);
 	kfree(s390_domain);
 }
 
+static void __s390_iommu_detach_device(struct zpci_dev *zdev)
+{
+	struct s390_domain *s390_domain = zdev->s390_domain;
+	struct s390_domain_device *domain_device, *tmp;
+	unsigned long flags;
+
+	if (!s390_domain)
+		return;
+
+	spin_lock_irqsave(&s390_domain->list_lock, flags);
+	list_for_each_entry_safe(domain_device, tmp, &s390_domain->devices,
+				 list) {
+		if (domain_device->zdev == zdev) {
+			list_del(&domain_device->list);
+			kfree(domain_device);
+			break;
+		}
+	}
+	spin_unlock_irqrestore(&s390_domain->list_lock, flags);
+
+	zpci_unregister_ioat(zdev, 0);
+	zdev->s390_domain = NULL;
+	zdev->dma_table = NULL;
+}
+
 static int s390_iommu_attach_device(struct iommu_domain *domain,
 				    struct device *dev)
 {
@@ -90,7 +116,7 @@ static int s390_iommu_attach_device(struct iommu_domain *domain,
 	struct zpci_dev *zdev = to_zpci_dev(dev);
 	struct s390_domain_device *domain_device;
 	unsigned long flags;
-	int cc, rc;
+	int cc, rc = 0;
 
 	if (!zdev)
 		return -ENODEV;
@@ -99,23 +125,17 @@ static int s390_iommu_attach_device(struct iommu_domain *domain,
 	if (!domain_device)
 		return -ENOMEM;
 
-	if (zdev->dma_table && !zdev->s390_domain) {
-		cc = zpci_dma_exit_device(zdev);
-		if (cc) {
-			rc = -EIO;
-			goto out_free;
-		}
-	}
-
 	if (zdev->s390_domain)
-		zpci_unregister_ioat(zdev, 0);
+		__s390_iommu_detach_device(zdev);
+	else if (zdev->dma_table)
+		zpci_dma_exit_device(zdev);
 
 	zdev->dma_table = s390_domain->dma_table;
 	cc = zpci_register_ioat(zdev, 0, zdev->start_dma, zdev->end_dma,
 				virt_to_phys(zdev->dma_table));
 	if (cc) {
 		rc = -EIO;
-		goto out_restore;
+		goto out_free;
 	}
 
 	spin_lock_irqsave(&s390_domain->list_lock, flags);
@@ -127,9 +147,9 @@ static int s390_iommu_attach_device(struct iommu_domain *domain,
 	/* Allow only devices with identical DMA range limits */
 	} else if (domain->geometry.aperture_start != zdev->start_dma ||
 		   domain->geometry.aperture_end != zdev->end_dma) {
-		rc = -EINVAL;
 		spin_unlock_irqrestore(&s390_domain->list_lock, flags);
-		goto out_restore;
+		rc = -EINVAL;
+		goto out_unregister;
 	}
 	domain_device->zdev = zdev;
 	zdev->s390_domain = s390_domain;
@@ -138,14 +158,9 @@ static int s390_iommu_attach_device(struct iommu_domain *domain,
 
 	return 0;
 
-out_restore:
-	if (!zdev->s390_domain) {
-		zpci_dma_init_device(zdev);
-	} else {
-		zdev->dma_table = zdev->s390_domain->dma_table;
-		zpci_register_ioat(zdev, 0, zdev->start_dma, zdev->end_dma,
-				   virt_to_phys(zdev->dma_table));
-	}
+out_unregister:
+	zpci_unregister_ioat(zdev, 0);
+	zdev->dma_table = NULL;
 out_free:
 	kfree(domain_device);
 
@@ -155,32 +170,12 @@ static int s390_iommu_attach_device(struct iommu_domain *domain,
 static void s390_iommu_detach_device(struct iommu_domain *domain,
 				     struct device *dev)
 {
-	struct s390_domain *s390_domain = to_s390_domain(domain);
 	struct zpci_dev *zdev = to_zpci_dev(dev);
-	struct s390_domain_device *domain_device, *tmp;
-	unsigned long flags;
-	int found = 0;
 
-	if (!zdev)
-		return;
-
-	spin_lock_irqsave(&s390_domain->list_lock, flags);
-	list_for_each_entry_safe(domain_device, tmp, &s390_domain->devices,
-				 list) {
-		if (domain_device->zdev == zdev) {
-			list_del(&domain_device->list);
-			kfree(domain_device);
-			found = 1;
-			break;
-		}
-	}
-	spin_unlock_irqrestore(&s390_domain->list_lock, flags);
+	WARN_ON(zdev->s390_domain != to_s390_domain(domain));
 
-	if (found && (zdev->s390_domain == s390_domain)) {
-		zdev->s390_domain = NULL;
-		zpci_unregister_ioat(zdev, 0);
-		zpci_dma_init_device(zdev);
-	}
+	__s390_iommu_detach_device(zdev);
+	zpci_dma_init_device(zdev);
 }
 
 static struct iommu_device *s390_iommu_probe_device(struct device *dev)
@@ -193,24 +188,13 @@ static struct iommu_device *s390_iommu_probe_device(struct device *dev)
 static void s390_iommu_release_device(struct device *dev)
 {
 	struct zpci_dev *zdev = to_zpci_dev(dev);
-	struct iommu_domain *domain;
 
 	/*
-	 * This is a workaround for a scenario where the IOMMU API common code
-	 * "forgets" to call the detach_dev callback: After binding a device
-	 * to vfio-pci and completing the VFIO_SET_IOMMU ioctl (which triggers
-	 * the attach_dev), removing the device via
-	 * "echo 1 > /sys/bus/pci/devices/.../remove" won't trigger detach_dev,
-	 * only release_device will be called via the BUS_NOTIFY_REMOVED_DEVICE
-	 * notifier.
-	 *
-	 * So let's call detach_dev from here if it hasn't been called before.
+	 * release_device is expected to detach any domain currently attached
+	 * to the device, but keep it attached to other devices in the group.
 	 */
-	if (zdev && zdev->s390_domain) {
-		domain = iommu_get_domain_for_dev(dev);
-		if (domain)
-			s390_iommu_detach_device(domain, dev);
-	}
+	if (zdev)
+		__s390_iommu_detach_device(zdev);
 }
 
 static int s390_iommu_update_trans(struct s390_domain *s390_domain,
Signature · 1 line
2.34.1
maintainer
#2 lore raw

Re: [PATCH v5 1/6] iommu/s390: Fix duplicate domain attachments

Quoted 15 lines · Niklas Schnelle

Since commit fa7e9ecc5e1c ("iommu/s390: Tolerate repeat attach_dev calls") we can end up with duplicates in the list of devices attached to a domain. This is inefficient and confusing since only one domain can actually be in control of the IOMMU translations for a device. Fix this by detaching the device from the previous domain, if any, on attach. Add a WARN_ON() in case we still have attached devices on freeing the domain. While here remove the re-attach on failure dance as it was determined to be unlikely to help and may confuse debug and recovery.

Fixes fa7e9ecc5e1c ("iommu/s390: Tolerate repeat attach_dev calls")

---
v4->v5:
- Unregister IOAT and set zdev->dma_table on error (Matt)

...

Quoted 28 lines

static int s390_iommu_attach_device(struct iommu_domain *domain,

drivers/iommu/s390-iommu.c +3 -10
 				    struct device *dev)
 {
@@ -90,7 +116,7 @@ static int s390_iommu_attach_device(struct iommu_domain *domain,
 	struct zpci_dev *zdev = to_zpci_dev(dev);
 	struct s390_domain_device *domain_device;
 	unsigned long flags;
-	int cc, rc;
+	int cc, rc = 0;
 
 	if (!zdev)
 		return -ENODEV;
@@ -99,23 +125,17 @@ static int s390_iommu_attach_device(struct iommu_domain *domain,
 	if (!domain_device)
 		return -ENOMEM;
 
-	if (zdev->dma_table && !zdev->s390_domain) {
-		cc = zpci_dma_exit_device(zdev);
-		if (cc) {
-			rc = -EIO;
-			goto out_free;
-		}
-	}
-
 	if (zdev->s390_domain)
-		zpci_unregister_ioat(zdev, 0);
+		__s390_iommu_detach_device(zdev);
+	else if (zdev->dma_table)

drivers/iommu/s390-iommu.c static int s390_iommu_attach_device(struct iommu_domain *domain, · line 139

Quoted 10 lines
drivers/iommu/s390-iommu.c +2 -1
+		zpci_dma_exit_device(zdev);
 
 	zdev->dma_table = s390_domain->dma_table;
 	cc = zpci_register_ioat(zdev, 0, zdev->start_dma, zdev->end_dma,
 				virt_to_phys(zdev->dma_table));
 	if (cc) {
 		rc = -EIO;
-		goto out_restore;
+		goto out_free;
 	}

Hmm, with this we will leave attach_dev with a zdev->dma_table associated with this domain (not one generated via zpci_dma_init_device) and zdev->s390_domain == 0. Won't this cause both s390_domain_free and zpci_dma_exit_device() to try and free the same dma table?

I think we also have to leave with a NULL zdev->dma_table in this case too (you technically could skip the zpci_unregister_ioat)

Quoted 32 lines
drivers/iommu/s390-iommu.c +5 -10
 	spin_lock_irqsave(&s390_domain->list_lock, flags);
@@ -127,9 +147,9 @@ static int s390_iommu_attach_device(struct iommu_domain *domain,
 	/* Allow only devices with identical DMA range limits */
 	} else if (domain->geometry.aperture_start != zdev->start_dma ||
 		   domain->geometry.aperture_end != zdev->end_dma) {
-		rc = -EINVAL;
 		spin_unlock_irqrestore(&s390_domain->list_lock, flags);
-		goto out_restore;
+		rc = -EINVAL;
+		goto out_unregister;
 	}
 	domain_device->zdev = zdev;
 	zdev->s390_domain = s390_domain;
@@ -138,14 +158,9 @@ static int s390_iommu_attach_device(struct iommu_domain *domain,
 
 	return 0;
 
-out_restore:
-	if (!zdev->s390_domain) {
-		zpci_dma_init_device(zdev);
-	} else {
-		zdev->dma_table = zdev->s390_domain->dma_table;
-		zpci_register_ioat(zdev, 0, zdev->start_dma, zdev->end_dma,
-				   virt_to_phys(zdev->dma_table));
-	}
+out_unregister:
+	zpci_unregister_ioat(zdev, 0);
+	zdev->dma_table = NULL;
 out_free:
 	kfree(domain_device);
 
author maintainer
#3 lore raw

Re: [PATCH v5 1/6] iommu/s390: Fix duplicate domain attachments

Quoted 59 lines · Matthew Rosato
Quoted 15 lines · Niklas Schnelle

Since commit fa7e9ecc5e1c ("iommu/s390: Tolerate repeat attach_dev calls") we can end up with duplicates in the list of devices attached to a domain. This is inefficient and confusing since only one domain can actually be in control of the IOMMU translations for a device. Fix this by detaching the device from the previous domain, if any, on attach. Add a WARN_ON() in case we still have attached devices on freeing the domain. While here remove the re-attach on failure dance as it was determined to be unlikely to help and may confuse debug and recovery.

Fixes fa7e9ecc5e1c ("iommu/s390: Tolerate repeat attach_dev calls")

---
v4->v5:
- Unregister IOAT and set zdev->dma_table on error (Matt)

...

Quoted 28 lines

static int s390_iommu_attach_device(struct iommu_domain *domain,

drivers/iommu/s390-iommu.c +3 -10
 				    struct device *dev)
 {
@@ -90,7 +116,7 @@ static int s390_iommu_attach_device(struct iommu_domain *domain,
 	struct zpci_dev *zdev = to_zpci_dev(dev);
 	struct s390_domain_device *domain_device;
 	unsigned long flags;
-	int cc, rc;
+	int cc, rc = 0;
 
 	if (!zdev)
 		return -ENODEV;
@@ -99,23 +125,17 @@ static int s390_iommu_attach_device(struct iommu_domain *domain,
 	if (!domain_device)
 		return -ENOMEM;
 
-	if (zdev->dma_table && !zdev->s390_domain) {
-		cc = zpci_dma_exit_device(zdev);
-		if (cc) {
-			rc = -EIO;
-			goto out_free;
-		}
-	}
-
 	if (zdev->s390_domain)
-		zpci_unregister_ioat(zdev, 0);
+		__s390_iommu_detach_device(zdev);
+	else if (zdev->dma_table)

drivers/iommu/s390-iommu.c static int s390_iommu_attach_device(struct iommu_domain *domain, · line 139

Quoted 10 lines
drivers/iommu/s390-iommu.c +2 -1
+		zpci_dma_exit_device(zdev);
 
 	zdev->dma_table = s390_domain->dma_table;
 	cc = zpci_register_ioat(zdev, 0, zdev->start_dma, zdev->end_dma,
 				virt_to_phys(zdev->dma_table));
 	if (cc) {
 		rc = -EIO;
-		goto out_restore;
+		goto out_free;
 	}

Hmm, with this we will leave attach_dev with a zdev->dma_table associated with this domain (not one generated via zpci_dma_init_device) and zdev->s390_domain == 0. Won't this cause both s390_domain_free and zpci_dma_exit_device() to try and free the same dma table?

Quoted 1 line

I think we also have to leave with a NULL zdev->dma_table in this case too (you technically could skip the zpci_unregister_ioat)

Argh you're right. This is I think a a bad rebase, in v4 I had the zpci_register_ioat() use s390_domain->dma_table and only set zdev-

Quoted 1 line

dma_table after that succeeded. I seem to have lost that part

somewhere along the way. With that we zdev->dma_table would be NULL and all would be good.

Quoted 33 lines
Quoted 33 lines
drivers/iommu/s390-iommu.c +5 -10
 	spin_lock_irqsave(&s390_domain->list_lock, flags);
@@ -127,9 +147,9 @@ static int s390_iommu_attach_device(struct iommu_domain *domain,
 	/* Allow only devices with identical DMA range limits */
 	} else if (domain->geometry.aperture_start != zdev->start_dma ||
 		   domain->geometry.aperture_end != zdev->end_dma) {
-		rc = -EINVAL;
 		spin_unlock_irqrestore(&s390_domain->list_lock, flags);
-		goto out_restore;
+		rc = -EINVAL;
+		goto out_unregister;
 	}
 	domain_device->zdev = zdev;
 	zdev->s390_domain = s390_domain;
@@ -138,14 +158,9 @@ static int s390_iommu_attach_device(struct iommu_domain *domain,
 
 	return 0;
 
-out_restore:
-	if (!zdev->s390_domain) {
-		zpci_dma_init_device(zdev);
-	} else {
-		zdev->dma_table = zdev->s390_domain->dma_table;
-		zpci_register_ioat(zdev, 0, zdev->start_dma, zdev->end_dma,
-				   virt_to_phys(zdev->dma_table));
-	}
+out_unregister:
+	zpci_unregister_ioat(zdev, 0);
+	zdev->dma_table = NULL;
 out_free:
 	kfree(domain_device);
 
author maintainer
#4 lore raw

Re: [PATCH v5 1/6] iommu/s390: Fix duplicate domain attachments

Quoted 60 lines · Niklas Schnelle
Quoted 59 lines · Matthew Rosato
Quoted 15 lines · Niklas Schnelle

Since commit fa7e9ecc5e1c ("iommu/s390: Tolerate repeat attach_dev calls") we can end up with duplicates in the list of devices attached to a domain. This is inefficient and confusing since only one domain can actually be in control of the IOMMU translations for a device. Fix this by detaching the device from the previous domain, if any, on attach. Add a WARN_ON() in case we still have attached devices on freeing the domain. While here remove the re-attach on failure dance as it was determined to be unlikely to help and may confuse debug and recovery.

Fixes fa7e9ecc5e1c ("iommu/s390: Tolerate repeat attach_dev calls")

---
v4->v5:
- Unregister IOAT and set zdev->dma_table on error (Matt)

...

Quoted 28 lines

static int s390_iommu_attach_device(struct iommu_domain *domain,

drivers/iommu/s390-iommu.c +3 -10
 				    struct device *dev)
 {
@@ -90,7 +116,7 @@ static int s390_iommu_attach_device(struct iommu_domain *domain,
 	struct zpci_dev *zdev = to_zpci_dev(dev);
 	struct s390_domain_device *domain_device;
 	unsigned long flags;
-	int cc, rc;
+	int cc, rc = 0;
 
 	if (!zdev)
 		return -ENODEV;
@@ -99,23 +125,17 @@ static int s390_iommu_attach_device(struct iommu_domain *domain,
 	if (!domain_device)
 		return -ENOMEM;
 
-	if (zdev->dma_table && !zdev->s390_domain) {
-		cc = zpci_dma_exit_device(zdev);
-		if (cc) {
-			rc = -EIO;
-			goto out_free;
-		}
-	}
-
 	if (zdev->s390_domain)
-		zpci_unregister_ioat(zdev, 0);
+		__s390_iommu_detach_device(zdev);
+	else if (zdev->dma_table)

drivers/iommu/s390-iommu.c static int s390_iommu_attach_device(struct iommu_domain *domain, · line 139

Quoted 10 lines
drivers/iommu/s390-iommu.c +2 -1
+		zpci_dma_exit_device(zdev);
 
 	zdev->dma_table = s390_domain->dma_table;
 	cc = zpci_register_ioat(zdev, 0, zdev->start_dma, zdev->end_dma,
 				virt_to_phys(zdev->dma_table));
 	if (cc) {
 		rc = -EIO;
-		goto out_restore;
+		goto out_free;
 	}

Hmm, with this we will leave attach_dev with a zdev->dma_table associated with this domain (not one generated via zpci_dma_init_device) and zdev->s390_domain == 0. Won't this cause both s390_domain_free and zpci_dma_exit_device() to try and free the same dma table?

Quoted 8 lines
Quoted 1 line

I think we also have to leave with a NULL zdev->dma_table in this case too (you technically could skip the zpci_unregister_ioat)

Argh you're right. This is I think a a bad rebase, in v4 I had the zpci_register_ioat() use s390_domain->dma_table and only set zdev-

Quoted 1 line

dma_table after that succeeded. I seem to have lost that part

somewhere along the way. With that we zdev->dma_table would be NULL and all would be good.

Went back to the way I did it in v4 for v6. I think I was simply an idiot and when comparing to the state prior to the commit forgot why I did it this way and thought it was an unneeded change..

Quoted 34 lines
Quoted 32 lines
Quoted 32 lines
drivers/iommu/s390-iommu.c +5 -10
 	spin_lock_irqsave(&s390_domain->list_lock, flags);
@@ -127,9 +147,9 @@ static int s390_iommu_attach_device(struct iommu_domain *domain,
 	/* Allow only devices with identical DMA range limits */
 	} else if (domain->geometry.aperture_start != zdev->start_dma ||
 		   domain->geometry.aperture_end != zdev->end_dma) {
-		rc = -EINVAL;
 		spin_unlock_irqrestore(&s390_domain->list_lock, flags);
-		goto out_restore;
+		rc = -EINVAL;
+		goto out_unregister;
 	}
 	domain_device->zdev = zdev;
 	zdev->s390_domain = s390_domain;
@@ -138,14 +158,9 @@ static int s390_iommu_attach_device(struct iommu_domain *domain,
 
 	return 0;
 
-out_restore:
-	if (!zdev->s390_domain) {
-		zpci_dma_init_device(zdev);
-	} else {
-		zdev->dma_table = zdev->s390_domain->dma_table;
-		zpci_register_ioat(zdev, 0, zdev->start_dma, zdev->end_dma,
-				   virt_to_phys(zdev->dma_table));
-	}
+out_unregister:
+	zpci_unregister_ioat(zdev, 0);
+	zdev->dma_table = NULL;
 out_free:
 	kfree(domain_device);
 
author maintainer
#5 lore raw

PATCH v5 2/6 iommu/s390: Get rid of s390_domain_device

In reply to Niklas Schnelle

The struct s390_domain_device serves the sole purpose as list entry for the devices list of a struct s390_domain. As it contains no additional information besides a list_head and a pointer to the struct zpci_dev we can simplify things and just thread the device list through struct zpci_dev directly. This removes the need to allocate during domain attach and gets rid of one level of indirection during mapping operations.

---
 arch/s390/include/asm/pci.h |  1 +
 drivers/iommu/s390-iommu.c  | 37 +++++++------------------------------
 2 files changed, 8 insertions(+), 30 deletions(-)
arch/s390/include/asm/pci.h +1 -0
index 108e732d7b14..15f8714ca9b7 100644
@@ -117,6 +117,7 @@ struct zpci_bus {
 struct zpci_dev {
 	struct zpci_bus *zbus;
 	struct list_head entry;		/* list of all zpci_devices, needed for hotplug, etc. */
+	struct list_head iommu_list;
 	struct kref kref;
 	struct hotplug_slot hotplug_slot;
 
drivers/iommu/s390-iommu.c +7 -30
index 938998c46bd3..9b3ae4b14636 100644
@@ -29,11 +29,6 @@ struct s390_domain {
 	spinlock_t		list_lock;
 };
 
-struct s390_domain_device {
-	struct list_head	list;
-	struct zpci_dev		*zdev;
-};
-
 static struct s390_domain *to_s390_domain(struct iommu_domain *dom)
 {
 	return container_of(dom, struct s390_domain, domain);
@@ -87,21 +82,13 @@ static void s390_domain_free(struct iommu_domain *domain)
 static void __s390_iommu_detach_device(struct zpci_dev *zdev)
 {
 	struct s390_domain *s390_domain = zdev->s390_domain;
-	struct s390_domain_device *domain_device, *tmp;
 	unsigned long flags;
 
 	if (!s390_domain)
 		return;
 
 	spin_lock_irqsave(&s390_domain->list_lock, flags);
-	list_for_each_entry_safe(domain_device, tmp, &s390_domain->devices,
-				 list) {
-		if (domain_device->zdev == zdev) {
-			list_del(&domain_device->list);
-			kfree(domain_device);
-			break;
-		}
-	}
+	list_del_init(&zdev->iommu_list);
 	spin_unlock_irqrestore(&s390_domain->list_lock, flags);
 
 	zpci_unregister_ioat(zdev, 0);
@@ -114,17 +101,12 @@ static int s390_iommu_attach_device(struct iommu_domain *domain,
 {
 	struct s390_domain *s390_domain = to_s390_domain(domain);
 	struct zpci_dev *zdev = to_zpci_dev(dev);
-	struct s390_domain_device *domain_device;
 	unsigned long flags;
 	int cc, rc = 0;
 
 	if (!zdev)
 		return -ENODEV;
 
-	domain_device = kzalloc(sizeof(*domain_device), GFP_KERNEL);
-	if (!domain_device)
-		return -ENOMEM;
-
 	if (zdev->s390_domain)
 		__s390_iommu_detach_device(zdev);
 	else if (zdev->dma_table)
@@ -133,10 +115,8 @@ static int s390_iommu_attach_device(struct iommu_domain *domain,
 	zdev->dma_table = s390_domain->dma_table;
 	cc = zpci_register_ioat(zdev, 0, zdev->start_dma, zdev->end_dma,
 				virt_to_phys(zdev->dma_table));
-	if (cc) {
-		rc = -EIO;
-		goto out_free;
-	}
+	if (cc)
+		return -EIO;
 
 	spin_lock_irqsave(&s390_domain->list_lock, flags);
 	/* First device defines the DMA range limits */
@@ -151,9 +131,8 @@ static int s390_iommu_attach_device(struct iommu_domain *domain,
 		rc = -EINVAL;
 		goto out_unregister;
 	}
-	domain_device->zdev = zdev;
 	zdev->s390_domain = s390_domain;
-	list_add(&domain_device->list, &s390_domain->devices);
+	list_add(&zdev->iommu_list, &s390_domain->devices);
 	spin_unlock_irqrestore(&s390_domain->list_lock, flags);
 
 	return 0;
@@ -161,8 +140,6 @@ static int s390_iommu_attach_device(struct iommu_domain *domain,
 out_unregister:
 	zpci_unregister_ioat(zdev, 0);
 	zdev->dma_table = NULL;
-out_free:
-	kfree(domain_device);
 
 	return rc;
 }
@@ -201,10 +178,10 @@ static int s390_iommu_update_trans(struct s390_domain *s390_domain,
 				   phys_addr_t pa, dma_addr_t dma_addr,
 				   size_t size, int flags)
 {
-	struct s390_domain_device *domain_device;
 	phys_addr_t page_addr = pa & PAGE_MASK;
 	dma_addr_t start_dma_addr = dma_addr;
 	unsigned long irq_flags, nr_pages, i;
+	struct zpci_dev *zdev;
 	unsigned long *entry;
 	int rc = 0;
 
@@ -229,8 +206,8 @@ static int s390_iommu_update_trans(struct s390_domain *s390_domain,
 	}
 
 	spin_lock(&s390_domain->list_lock);
-	list_for_each_entry(domain_device, &s390_domain->devices, list) {
-		rc = zpci_refresh_trans((u64) domain_device->zdev->fh << 32,
+	list_for_each_entry(zdev, &s390_domain->devices, iommu_list) {
+		rc = zpci_refresh_trans((u64)zdev->fh << 32,
 					start_dma_addr, nr_pages * PAGE_SIZE);
 		if (rc)
 			break;
Signature · 1 line
2.34.1
author maintainer
#6 lore raw

Re: [PATCH v5 2/6] iommu/s390: Get rid of s390_domain_device

Quoted 10 lines · Niklas Schnelle

The struct s390_domain_device serves the sole purpose as list entry for the devices list of a struct s390_domain. As it contains no additional information besides a list_head and a pointer to the struct zpci_dev we can simplify things and just thread the device list through struct zpci_dev directly. This removes the need to allocate during domain attach and gets rid of one level of indirection during mapping operations.

@Jason, on second thought not sure if your R-b still holds as you only implied that the zpci_unregister_ioat(), zdev->dma_table = NULL is okay with the plan of ignoring zpci_register_ioat() fail on error in the future (already have the patch).

Quoted 5 lines
---
 arch/s390/include/asm/pci.h |  1 +
 drivers/iommu/s390-iommu.c  | 37 +++++++------------------------------
 2 files changed, 8 insertions(+), 30 deletions(-)

---8<---

author maintainer
#7 lore raw

PATCH v5 3/6 iommu/s390: Fix potential s390_domain aperture shrinking

In reply to Niklas Schnelle

The s390 IOMMU driver currently sets the IOMMU domain's aperture to match the device specific DMA address range of the device that is first attached. This is not ideal. For one if the domain has no device attached in the meantime the aperture could be shrunk allowing translations outside the aperture to exist in the translation tables. Also this is a bit of a misuse of the aperture which really should describe what addresses can be translated and not some device specific limitations.

Instead of misusing the aperture like this we can instead create reserved ranges for the ranges inaccessible to the attached devices allowing devices with overlapping ranges to still share an IOMMU domain. This also significantly simplifies s390_iommu_attach_device() allowing us to move the aperture check to the beginning of the function and removing the need to hold the device list's lock to check the aperture.

As we then use the same aperture for all domains and it only depends on the table properties we can already check zdev->start_dma/end_dma at probe time and turn the check on attach into a WARN_ON().

---
v4->v5:
- Make aperture check in attach a WARN_ON() and fail in probe if zdev->start_dma/end_dma doesn't git in aperture (Jason)

 drivers/iommu/s390-iommu.c | 65 +++++++++++++++++++++++++-------------
 1 file changed, 43 insertions(+), 22 deletions(-)
drivers/iommu/s390-iommu.c +43 -22
index 9b3ae4b14636..1f6c9bee9a80 100644
@@ -62,6 +62,9 @@ static struct iommu_domain *s390_domain_alloc(unsigned domain_type)
 		kfree(s390_domain);
 		return NULL;
 	}
+	s390_domain->domain.geometry.force_aperture = true;
+	s390_domain->domain.geometry.aperture_start = 0;
+	s390_domain->domain.geometry.aperture_end = ZPCI_TABLE_SIZE_RT - 1;
 
 	spin_lock_init(&s390_domain->dma_table_lock);
 	spin_lock_init(&s390_domain->list_lock);
@@ -102,46 +105,32 @@ static int s390_iommu_attach_device(struct iommu_domain *domain,
 	struct s390_domain *s390_domain = to_s390_domain(domain);
 	struct zpci_dev *zdev = to_zpci_dev(dev);
 	unsigned long flags;
-	int cc, rc = 0;
+	int cc;
 
 	if (!zdev)
 		return -ENODEV;
 
+	WARN_ON(domain->geometry.aperture_start > zdev->end_dma ||
+		domain->geometry.aperture_end < zdev->start_dma);
+
 	if (zdev->s390_domain)
 		__s390_iommu_detach_device(zdev);
 	else if (zdev->dma_table)
 		zpci_dma_exit_device(zdev);
 
-	zdev->dma_table = s390_domain->dma_table;
 	cc = zpci_register_ioat(zdev, 0, zdev->start_dma, zdev->end_dma,
-				virt_to_phys(zdev->dma_table));
+				virt_to_phys(s390_domain->dma_table));
 	if (cc)
 		return -EIO;
 
-	spin_lock_irqsave(&s390_domain->list_lock, flags);
-	/* First device defines the DMA range limits */
-	if (list_empty(&s390_domain->devices)) {
-		domain->geometry.aperture_start = zdev->start_dma;
-		domain->geometry.aperture_end = zdev->end_dma;
-		domain->geometry.force_aperture = true;
-	/* Allow only devices with identical DMA range limits */
-	} else if (domain->geometry.aperture_start != zdev->start_dma ||
-		   domain->geometry.aperture_end != zdev->end_dma) {
-		spin_unlock_irqrestore(&s390_domain->list_lock, flags);
-		rc = -EINVAL;
-		goto out_unregister;
-	}
+	zdev->dma_table = s390_domain->dma_table;
 	zdev->s390_domain = s390_domain;
+
+	spin_lock_irqsave(&s390_domain->list_lock, flags);
 	list_add(&zdev->iommu_list, &s390_domain->devices);
 	spin_unlock_irqrestore(&s390_domain->list_lock, flags);
 
 	return 0;
-
-out_unregister:
-	zpci_unregister_ioat(zdev, 0);
-	zdev->dma_table = NULL;
-
-	return rc;
 }
 
 static void s390_iommu_detach_device(struct iommu_domain *domain,
@@ -155,10 +144,41 @@ static void s390_iommu_detach_device(struct iommu_domain *domain,
 	zpci_dma_init_device(zdev);
 }
 
+static void s390_iommu_get_resv_regions(struct device *dev,
+					struct list_head *list)
+{
+	struct zpci_dev *zdev = to_zpci_dev(dev);
+	struct iommu_resv_region *region;
+
+	if (zdev->start_dma) {
+		region = iommu_alloc_resv_region(0, zdev->start_dma, 0,
+						 IOMMU_RESV_RESERVED);
+		if (!region)
+			return;
+		list_add_tail(&region->list, list);
+	}
+
+	if (zdev->end_dma < ZPCI_TABLE_SIZE_RT - 1) {
+		region = iommu_alloc_resv_region(zdev->end_dma + 1,
+						 ZPCI_TABLE_SIZE_RT - zdev->end_dma - 1,
+						 0, IOMMU_RESV_RESERVED);
+		if (!region)
+			return;
+		list_add_tail(&region->list, list);
+	}
+}
+
 static struct iommu_device *s390_iommu_probe_device(struct device *dev)
 {
 	struct zpci_dev *zdev = to_zpci_dev(dev);
 
+	if (zdev->start_dma > zdev->end_dma ||
+	    zdev->start_dma > ZPCI_TABLE_SIZE_RT - 1)
+		return ERR_PTR(-EINVAL);
+
+	if (zdev->end_dma > ZPCI_TABLE_SIZE_RT - 1)
+		zdev->end_dma = ZPCI_TABLE_SIZE_RT - 1;
+
 	return &zdev->iommu_dev;
 }
 
@@ -337,6 +357,7 @@ static const struct iommu_ops s390_iommu_ops = {
 	.release_device = s390_iommu_release_device,
 	.device_group = generic_device_group,
 	.pgsize_bitmap = S390_IOMMU_PGSIZES,
+	.get_resv_regions = s390_iommu_get_resv_regions,
 	.default_domain_ops = &(const struct iommu_domain_ops) {
 		.attach_dev	= s390_iommu_attach_device,
 		.detach_dev	= s390_iommu_detach_device,
Signature · 1 line
2.34.1
author maintainer
#8 lore raw

Re: [PATCH v5 3/6] iommu/s390: Fix potential s390_domain aperture shrinking

Quoted 16 lines · Niklas Schnelle

The s390 IOMMU driver currently sets the IOMMU domain's aperture to match the device specific DMA address range of the device that is first attached. This is not ideal. For one if the domain has no device attached in the meantime the aperture could be shrunk allowing translations outside the aperture to exist in the translation tables. Also this is a bit of a misuse of the aperture which really should describe what addresses can be translated and not some device specific limitations.

Instead of misusing the aperture like this we can instead create reserved ranges for the ranges inaccessible to the attached devices allowing devices with overlapping ranges to still share an IOMMU domain. This also significantly simplifies s390_iommu_attach_device() allowing us to move the aperture check to the beginning of the function and removing the need to hold the device list's lock to check the aperture.

Quoted 6 lines

As we then use the same aperture for all domains and it only depends on the table properties we can already check zdev->start_dma/end_dma at probe time and turn the check on attach into a WARN_ON().

@Matt, @Jason I did drop the R-b's here because the change Jason suggested of changing the aperture check on attach to a WARN_ON() and checking zdev->start_dma/end_dma on probe is a behavioral change.

drivers/iommu/s390-iommu.c

Quoted 11 lines

---
v4->v5:
- Make aperture check in attach a WARN_ON() and fail in probe if zdev->start_dma/end_dma doesn't git in aperture (Jason)

 drivers/iommu/s390-iommu.c | 65 +++++++++++++++++++++++++-------------
 1 file changed, 43 insertions(+), 22 deletions(-)
drivers/iommu/s390-iommu.c +0 -1
index 9b3ae4b14636..1f6c9bee9a80 100644
--- a/drivers/iommu/s390-iommu.c

---8<---

maintainer Reviewed-by on v5 3/6
#9 lore raw

Re: [PATCH v5 3/6] iommu/s390: Fix potential s390_domain aperture shrinking

In reply to Niklas Schnelle
Quoted 16 lines · Niklas Schnelle

The s390 IOMMU driver currently sets the IOMMU domain's aperture to match the device specific DMA address range of the device that is first attached. This is not ideal. For one if the domain has no device attached in the meantime the aperture could be shrunk allowing translations outside the aperture to exist in the translation tables. Also this is a bit of a misuse of the aperture which really should describe what addresses can be translated and not some device specific limitations.

Instead of misusing the aperture like this we can instead create reserved ranges for the ranges inaccessible to the attached devices allowing devices with overlapping ranges to still share an IOMMU domain. This also significantly simplifies s390_iommu_attach_device() allowing us to move the aperture check to the beginning of the function and removing the need to hold the device list's lock to check the aperture.

Quoted 6 lines

As we then use the same aperture for all domains and it only depends on the table properties we can already check zdev->start_dma/end_dma at probe time and turn the check on attach into a WARN_ON().

Quoted 127 lines

---
v4->v5:
- Make aperture check in attach a WARN_ON() and fail in probe if zdev->start_dma/end_dma doesn't git in aperture (Jason)

 drivers/iommu/s390-iommu.c | 65 +++++++++++++++++++++++++-------------
 1 file changed, 43 insertions(+), 22 deletions(-)
drivers/iommu/s390-iommu.c +43 -22
index 9b3ae4b14636..1f6c9bee9a80 100644
@@ -62,6 +62,9 @@ static struct iommu_domain *s390_domain_alloc(unsigned domain_type)
 		kfree(s390_domain);
 		return NULL;
 	}
+	s390_domain->domain.geometry.force_aperture = true;
+	s390_domain->domain.geometry.aperture_start = 0;
+	s390_domain->domain.geometry.aperture_end = ZPCI_TABLE_SIZE_RT - 1;
 
 	spin_lock_init(&s390_domain->dma_table_lock);
 	spin_lock_init(&s390_domain->list_lock);
@@ -102,46 +105,32 @@ static int s390_iommu_attach_device(struct iommu_domain *domain,
 	struct s390_domain *s390_domain = to_s390_domain(domain);
 	struct zpci_dev *zdev = to_zpci_dev(dev);
 	unsigned long flags;
-	int cc, rc = 0;
+	int cc;
 
 	if (!zdev)
 		return -ENODEV;
 
+	WARN_ON(domain->geometry.aperture_start > zdev->end_dma ||
+		domain->geometry.aperture_end < zdev->start_dma);
+
 	if (zdev->s390_domain)
 		__s390_iommu_detach_device(zdev);
 	else if (zdev->dma_table)
 		zpci_dma_exit_device(zdev);
 
-	zdev->dma_table = s390_domain->dma_table;
 	cc = zpci_register_ioat(zdev, 0, zdev->start_dma, zdev->end_dma,
-				virt_to_phys(zdev->dma_table));
+				virt_to_phys(s390_domain->dma_table));
 	if (cc)
 		return -EIO;
 
-	spin_lock_irqsave(&s390_domain->list_lock, flags);
-	/* First device defines the DMA range limits */
-	if (list_empty(&s390_domain->devices)) {
-		domain->geometry.aperture_start = zdev->start_dma;
-		domain->geometry.aperture_end = zdev->end_dma;
-		domain->geometry.force_aperture = true;
-	/* Allow only devices with identical DMA range limits */
-	} else if (domain->geometry.aperture_start != zdev->start_dma ||
-		   domain->geometry.aperture_end != zdev->end_dma) {
-		spin_unlock_irqrestore(&s390_domain->list_lock, flags);
-		rc = -EINVAL;
-		goto out_unregister;
-	}
+	zdev->dma_table = s390_domain->dma_table;
 	zdev->s390_domain = s390_domain;
+
+	spin_lock_irqsave(&s390_domain->list_lock, flags);
 	list_add(&zdev->iommu_list, &s390_domain->devices);
 	spin_unlock_irqrestore(&s390_domain->list_lock, flags);
 
 	return 0;
-
-out_unregister:
-	zpci_unregister_ioat(zdev, 0);
-	zdev->dma_table = NULL;
-
-	return rc;
 }
 
 static void s390_iommu_detach_device(struct iommu_domain *domain,
@@ -155,10 +144,41 @@ static void s390_iommu_detach_device(struct iommu_domain *domain,
 	zpci_dma_init_device(zdev);
 }
 
+static void s390_iommu_get_resv_regions(struct device *dev,
+					struct list_head *list)
+{
+	struct zpci_dev *zdev = to_zpci_dev(dev);
+	struct iommu_resv_region *region;
+
+	if (zdev->start_dma) {
+		region = iommu_alloc_resv_region(0, zdev->start_dma, 0,
+						 IOMMU_RESV_RESERVED);
+		if (!region)
+			return;
+		list_add_tail(&region->list, list);
+	}
+
+	if (zdev->end_dma < ZPCI_TABLE_SIZE_RT - 1) {
+		region = iommu_alloc_resv_region(zdev->end_dma + 1,
+						 ZPCI_TABLE_SIZE_RT - zdev->end_dma - 1,
+						 0, IOMMU_RESV_RESERVED);
+		if (!region)
+			return;
+		list_add_tail(&region->list, list);
+	}
+}
+
 static struct iommu_device *s390_iommu_probe_device(struct device *dev)
 {
 	struct zpci_dev *zdev = to_zpci_dev(dev);
 
+	if (zdev->start_dma > zdev->end_dma ||
+	    zdev->start_dma > ZPCI_TABLE_SIZE_RT - 1)
+		return ERR_PTR(-EINVAL);
+
+	if (zdev->end_dma > ZPCI_TABLE_SIZE_RT - 1)
+		zdev->end_dma = ZPCI_TABLE_SIZE_RT - 1;
+
 	return &zdev->iommu_dev;
 }
 
@@ -337,6 +357,7 @@ static const struct iommu_ops s390_iommu_ops = {
 	.release_device = s390_iommu_release_device,
 	.device_group = generic_device_group,
 	.pgsize_bitmap = S390_IOMMU_PGSIZES,
+	.get_resv_regions = s390_iommu_get_resv_regions,
 	.default_domain_ops = &(const struct iommu_domain_ops) {
 		.attach_dev	= s390_iommu_attach_device,
 		.detach_dev	= s390_iommu_detach_device,
author maintainer
#10 lore raw

Re: [PATCH v5 3/6] iommu/s390: Fix potential s390_domain aperture shrinking

Quoted 55 lines · Matthew Rosato
Quoted 16 lines · Niklas Schnelle

The s390 IOMMU driver currently sets the IOMMU domain's aperture to match the device specific DMA address range of the device that is first attached. This is not ideal. For one if the domain has no device attached in the meantime the aperture could be shrunk allowing translations outside the aperture to exist in the translation tables. Also this is a bit of a misuse of the aperture which really should describe what addresses can be translated and not some device specific limitations.

Instead of misusing the aperture like this we can instead create reserved ranges for the ranges inaccessible to the attached devices allowing devices with overlapping ranges to still share an IOMMU domain. This also significantly simplifies s390_iommu_attach_device() allowing us to move the aperture check to the beginning of the function and removing the need to hold the device list's lock to check the aperture.

Quoted 6 lines

As we then use the same aperture for all domains and it only depends on the table properties we can already check zdev->start_dma/end_dma at probe time and turn the check on attach into a WARN_ON().

Quoted 29 lines

---
v4->v5:
- Make aperture check in attach a WARN_ON() and fail in probe if zdev->start_dma/end_dma doesn't git in aperture (Jason)

 drivers/iommu/s390-iommu.c | 65 +++++++++++++++++++++++++-------------
 1 file changed, 43 insertions(+), 22 deletions(-)
drivers/iommu/s390-iommu.c +4 -1
index 9b3ae4b14636..1f6c9bee9a80 100644
@@ -62,6 +62,9 @@ static struct iommu_domain *s390_domain_alloc(unsigned domain_type)
 		kfree(s390_domain);
 		return NULL;
 	}
+	s390_domain->domain.geometry.force_aperture = true;
+	s390_domain->domain.geometry.aperture_start = 0;
+	s390_domain->domain.geometry.aperture_end = ZPCI_TABLE_SIZE_RT - 1;
 
 	spin_lock_init(&s390_domain->dma_table_lock);
 	spin_lock_init(&s390_domain->list_lock);
@@ -102,46 +105,32 @@ static int s390_iommu_attach_device(struct iommu_domain *domain,
 	struct s390_domain *s390_domain = to_s390_domain(domain);
 	struct zpci_dev *zdev = to_zpci_dev(dev);
 	unsigned long flags;
-	int cc, rc = 0;
+	int cc;
 
Quoted 6 lines

drivers/iommu/s390-iommu.c static int s390_iommu_attach_device(struct iommu_domain *domain, · line 115

Quoted 6 lines
drivers/iommu/s390-iommu.c +3 -0
 	if (!zdev)
 		return -ENODEV;
 
+	WARN_ON(domain->geometry.aperture_start > zdev->end_dma ||
+		domain->geometry.aperture_end < zdev->start_dma);
+

I think this one should still return with -EINVAL.

Quoted 32 lines
Quoted 32 lines
drivers/iommu/s390-iommu.c +4 -15
 	if (zdev->s390_domain)
 		__s390_iommu_detach_device(zdev);
 	else if (zdev->dma_table)
 		zpci_dma_exit_device(zdev);
 
-	zdev->dma_table = s390_domain->dma_table;
 	cc = zpci_register_ioat(zdev, 0, zdev->start_dma, zdev->end_dma,
-				virt_to_phys(zdev->dma_table));
+				virt_to_phys(s390_domain->dma_table));
 	if (cc)
 		return -EIO;
 
-	spin_lock_irqsave(&s390_domain->list_lock, flags);
-	/* First device defines the DMA range limits */
-	if (list_empty(&s390_domain->devices)) {
-		domain->geometry.aperture_start = zdev->start_dma;
-		domain->geometry.aperture_end = zdev->end_dma;
-		domain->geometry.force_aperture = true;
-	/* Allow only devices with identical DMA range limits */
-	} else if (domain->geometry.aperture_start != zdev->start_dma ||
-		   domain->geometry.aperture_end != zdev->end_dma) {
-		spin_unlock_irqrestore(&s390_domain->list_lock, flags);
-		rc = -EINVAL;
-		goto out_unregister;
-	}
+	zdev->dma_table = s390_domain->dma_table;
 	zdev->s390_domain = s390_domain;
+
+	spin_lock_irqsave(&s390_domain->list_lock, flags);
 	list_add(&zdev->iommu_list, &s390_domain->devices);
 	spin_unlock_irqrestore(&s390_domain->list_lock, flags);
 
Quoted 10 lines

drivers/iommu/s390-iommu.c static int s390_iommu_attach_device(struct iommu_domain *domain,

Quoted 10 lines
drivers/iommu/s390-iommu.c +0 -6
 	return 0;
-
-out_unregister:
-	zpci_unregister_ioat(zdev, 0);
-	zdev->dma_table = NULL;
-
-	return rc;
 }
 
 

---8<---

author maintainer
#11 lore raw

PATCH v5 4/6 iommu/s390: Fix incorrect aperture check

In reply to Niklas Schnelle

The domain->geometry.aperture_end specifies the last valid address treat it as such when checking if a DMA address is valid.

---
 drivers/iommu/s390-iommu.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/iommu/s390-iommu.c +1 -1
index 1f6c9bee9a80..a89fd0256f99 100644
@@ -206,7 +206,7 @@ static int s390_iommu_update_trans(struct s390_domain *s390_domain,
 	int rc = 0;
 
 	if (dma_addr < s390_domain->domain.geometry.aperture_start ||
-	    dma_addr + size > s390_domain->domain.geometry.aperture_end)
+	    (dma_addr + size - 1) > s390_domain->domain.geometry.aperture_end)
 		return -EINVAL;
 
 	nr_pages = PAGE_ALIGN(size) >> PAGE_SHIFT;
Signature · 1 line
2.34.1
author maintainer
#12 lore raw

PATCH v5 5/6 iommu/s390: Fix incorrect pgsize_bitmap

In reply to Niklas Schnelle

The .pgsize_bitmap property of struct iommu_ops is not a page mask but rather has a bit set for each size of pages the IOMMU supports. As the comment correctly pointed out at this moment the code only support 4K pages so simply use SZ_4K here.

---
 drivers/iommu/s390-iommu.c | 9 +--------
 1 file changed, 1 insertion(+), 8 deletions(-)
drivers/iommu/s390-iommu.c +1 -8
index a89fd0256f99..ac200f0b81fa 100644
@@ -12,13 +12,6 @@
 #include <linux/sizes.h>
 #include <asm/pci_dma.h>
 
-/*
- * Physically contiguous memory regions can be mapped with 4 KiB alignment,
- * we allow all page sizes that are an order of 4KiB (no special large page
- * support so far).
- */
-#define S390_IOMMU_PGSIZES	(~0xFFFUL)
-
 static const struct iommu_ops s390_iommu_ops;
 
 struct s390_domain {
@@ -356,7 +349,7 @@ static const struct iommu_ops s390_iommu_ops = {
 	.probe_device = s390_iommu_probe_device,
 	.release_device = s390_iommu_release_device,
 	.device_group = generic_device_group,
-	.pgsize_bitmap = S390_IOMMU_PGSIZES,
+	.pgsize_bitmap = SZ_4K,
 	.get_resv_regions = s390_iommu_get_resv_regions,
 	.default_domain_ops = &(const struct iommu_domain_ops) {
 		.attach_dev	= s390_iommu_attach_device,
Signature · 1 line
2.34.1
author maintainer
#13 lore raw

PATCH v5 6/6 iommu/s390: Implement map_pages()/unmap_pages() instead of map()/unmap()

In reply to Niklas Schnelle

While s390-iommu currently implements the map_page()/unmap_page() operations which only map/unmap a single page at a time the internal s390_iommu_update_trans() API already supports mapping/unmapping a range of pages at once. Take advantage of this by implementing the map_pages()/unmap_pages() operations instead thus allowing users of the IOMMU drivers to map multiple pages in a single call followed by a single I/O TLB flush if needed.

---
 drivers/iommu/s390-iommu.c | 48 +++++++++++++++++++++++++-------------
 1 file changed, 32 insertions(+), 16 deletions(-)
drivers/iommu/s390-iommu.c +32 -16
index ac200f0b81fa..7b92855135ac 100644
@@ -189,20 +189,15 @@ static void s390_iommu_release_device(struct device *dev)
 
 static int s390_iommu_update_trans(struct s390_domain *s390_domain,
 				   phys_addr_t pa, dma_addr_t dma_addr,
-				   size_t size, int flags)
+				   unsigned long nr_pages, int flags)
 {
 	phys_addr_t page_addr = pa & PAGE_MASK;
 	dma_addr_t start_dma_addr = dma_addr;
-	unsigned long irq_flags, nr_pages, i;
+	unsigned long irq_flags, i;
 	struct zpci_dev *zdev;
 	unsigned long *entry;
 	int rc = 0;
 
-	if (dma_addr < s390_domain->domain.geometry.aperture_start ||
-	    (dma_addr + size - 1) > s390_domain->domain.geometry.aperture_end)
-		return -EINVAL;
-
-	nr_pages = PAGE_ALIGN(size) >> PAGE_SHIFT;
 	if (!nr_pages)
 		return 0;
 
@@ -245,11 +240,24 @@ static int s390_iommu_update_trans(struct s390_domain *s390_domain,
 	return rc;
 }
 
-static int s390_iommu_map(struct iommu_domain *domain, unsigned long iova,
-			  phys_addr_t paddr, size_t size, int prot, gfp_t gfp)
+static int s390_iommu_map_pages(struct iommu_domain *domain,
+				unsigned long iova, phys_addr_t paddr,
+				size_t pgsize, size_t pgcount,
+				int prot, gfp_t gfp, size_t *mapped)
 {
 	struct s390_domain *s390_domain = to_s390_domain(domain);
 	int flags = ZPCI_PTE_VALID, rc = 0;
+	size_t size = pgcount << __ffs(pgsize);
+
+	if (pgsize != SZ_4K)
+		return -EINVAL;
+
+	if (iova < s390_domain->domain.geometry.aperture_start ||
+	    (iova + size - 1) > s390_domain->domain.geometry.aperture_end)
+		return -EINVAL;
+
+	if (!IS_ALIGNED(iova | paddr, pgsize))
+		return -EINVAL;
 
 	if (!(prot & IOMMU_READ))
 		return -EINVAL;
@@ -258,7 +266,9 @@ static int s390_iommu_map(struct iommu_domain *domain, unsigned long iova,
 		flags |= ZPCI_TABLE_PROTECTED;
 
 	rc = s390_iommu_update_trans(s390_domain, paddr, iova,
-				     size, flags);
+				     pgcount, flags);
+	if (!rc)
+		*mapped = size;
 
 	return rc;
 }
@@ -294,21 +304,27 @@ static phys_addr_t s390_iommu_iova_to_phys(struct iommu_domain *domain,
 	return phys;
 }
 
-static size_t s390_iommu_unmap(struct iommu_domain *domain,
-			       unsigned long iova, size_t size,
-			       struct iommu_iotlb_gather *gather)
+static size_t s390_iommu_unmap_pages(struct iommu_domain *domain,
+				     unsigned long iova,
+				     size_t pgsize, size_t pgcount,
+				     struct iommu_iotlb_gather *gather)
 {
 	struct s390_domain *s390_domain = to_s390_domain(domain);
+	size_t size = pgcount << __ffs(pgsize);
 	int flags = ZPCI_PTE_INVALID;
 	phys_addr_t paddr;
 	int rc;
 
+	if (iova < s390_domain->domain.geometry.aperture_start ||
+	    (iova + size - 1) > s390_domain->domain.geometry.aperture_end)
+		return 0;
+
 	paddr = s390_iommu_iova_to_phys(domain, iova);
 	if (!paddr)
 		return 0;
 
 	rc = s390_iommu_update_trans(s390_domain, paddr, iova,
-				     size, flags);
+				     pgcount, flags);
 	if (rc)
 		return 0;
 
@@ -354,8 +370,8 @@ static const struct iommu_ops s390_iommu_ops = {
 	.default_domain_ops = &(const struct iommu_domain_ops) {
 		.attach_dev	= s390_iommu_attach_device,
 		.detach_dev	= s390_iommu_detach_device,
-		.map		= s390_iommu_map,
-		.unmap		= s390_iommu_unmap,
+		.map_pages	= s390_iommu_map_pages,
+		.unmap_pages	= s390_iommu_unmap_pages,
 		.iova_to_phys	= s390_iommu_iova_to_phys,
 		.free		= s390_domain_free,
 	}
Signature · 1 line
2.34.1
maintainer Reviewed-by on v5 6/6
#14 lore raw

Re: [PATCH v5 6/6] iommu/s390: Implement map_pages()/unmap_pages() instead of map()/unmap()

Quoted 90 lines · Niklas Schnelle

While s390-iommu currently implements the map_page()/unmap_page() operations which only map/unmap a single page at a time the internal s390_iommu_update_trans() API already supports mapping/unmapping a range of pages at once. Take advantage of this by implementing the map_pages()/unmap_pages() operations instead thus allowing users of the IOMMU drivers to map multiple pages in a single call followed by a single I/O TLB flush if needed.

---
 drivers/iommu/s390-iommu.c | 48 +++++++++++++++++++++++++-------------
 1 file changed, 32 insertions(+), 16 deletions(-)
drivers/iommu/s390-iommu.c +24 -13
index ac200f0b81fa..7b92855135ac 100644
@@ -189,20 +189,15 @@ static void s390_iommu_release_device(struct device *dev)
 
 static int s390_iommu_update_trans(struct s390_domain *s390_domain,
 				   phys_addr_t pa, dma_addr_t dma_addr,
-				   size_t size, int flags)
+				   unsigned long nr_pages, int flags)
 {
 	phys_addr_t page_addr = pa & PAGE_MASK;
 	dma_addr_t start_dma_addr = dma_addr;
-	unsigned long irq_flags, nr_pages, i;
+	unsigned long irq_flags, i;
 	struct zpci_dev *zdev;
 	unsigned long *entry;
 	int rc = 0;
 
-	if (dma_addr < s390_domain->domain.geometry.aperture_start ||
-	    (dma_addr + size - 1) > s390_domain->domain.geometry.aperture_end)
-		return -EINVAL;
-
-	nr_pages = PAGE_ALIGN(size) >> PAGE_SHIFT;
 	if (!nr_pages)
 		return 0;
 
@@ -245,11 +240,24 @@ static int s390_iommu_update_trans(struct s390_domain *s390_domain,
 	return rc;
 }
 
-static int s390_iommu_map(struct iommu_domain *domain, unsigned long iova,
-			  phys_addr_t paddr, size_t size, int prot, gfp_t gfp)
+static int s390_iommu_map_pages(struct iommu_domain *domain,
+				unsigned long iova, phys_addr_t paddr,
+				size_t pgsize, size_t pgcount,
+				int prot, gfp_t gfp, size_t *mapped)
 {
 	struct s390_domain *s390_domain = to_s390_domain(domain);
 	int flags = ZPCI_PTE_VALID, rc = 0;
+	size_t size = pgcount << __ffs(pgsize);
+
+	if (pgsize != SZ_4K)
+		return -EINVAL;
+
+	if (iova < s390_domain->domain.geometry.aperture_start ||
+	    (iova + size - 1) > s390_domain->domain.geometry.aperture_end)
+		return -EINVAL;
+
+	if (!IS_ALIGNED(iova | paddr, pgsize))
+		return -EINVAL;
 
 	if (!(prot & IOMMU_READ))
 		return -EINVAL;
@@ -258,7 +266,9 @@ static int s390_iommu_map(struct iommu_domain *domain, unsigned long iova,
 		flags |= ZPCI_TABLE_PROTECTED;
 
 	rc = s390_iommu_update_trans(s390_domain, paddr, iova,
-				     size, flags);
+				     pgcount, flags);
+	if (!rc)
+		*mapped = size;
 
 	return rc;
 }
@@ -294,21 +304,27 @@ static phys_addr_t s390_iommu_iova_to_phys(struct iommu_domain *domain,
 	return phys;
 }
 
-static size_t s390_iommu_unmap(struct iommu_domain *domain,
-			       unsigned long iova, size_t size,
-			       struct iommu_iotlb_gather *gather)
+static size_t s390_iommu_unmap_pages(struct iommu_domain *domain,
+				     unsigned long iova,
+				     size_t pgsize, size_t pgcount,
+				     struct iommu_iotlb_gather *gather)
 {

drivers/iommu/s390-iommu.c static phys_addr_t s390_iommu_iova_to_phys(struct iommu_domain *domain, · line 321

Quoted 10 lines
drivers/iommu/s390-iommu.c +5 -0
 	struct s390_domain *s390_domain = to_s390_domain(domain);
+	size_t size = pgcount << __ffs(pgsize);
 	int flags = ZPCI_PTE_INVALID;
 	phys_addr_t paddr;
 	int rc;
 
+	if (iova < s390_domain->domain.geometry.aperture_start ||
+	    (iova + size - 1) > s390_domain->domain.geometry.aperture_end)
+		return 0;
+

Overall this LGTM and runs well with my testing. But I'm curious why we silently ignore an egregiously bad unmap request here? We've already done an -EINVAL for an attempt to map_pages() something outside of the aperture. If something still tries to unmap_pages() outside of the aperture, that seems like a bug? Maybe this should be surrounded by a if (WARN_ON(... || ...) to signify the unexpected behavior and then still return 0?

Otherwise:

Quoted 21 lines
drivers/iommu/s390-iommu.c +3 -3
 	paddr = s390_iommu_iova_to_phys(domain, iova);
 	if (!paddr)
 		return 0;
 
 	rc = s390_iommu_update_trans(s390_domain, paddr, iova,
-				     size, flags);
+				     pgcount, flags);
 	if (rc)
 		return 0;
 
@@ -354,8 +370,8 @@ static const struct iommu_ops s390_iommu_ops = {
 	.default_domain_ops = &(const struct iommu_domain_ops) {
 		.attach_dev	= s390_iommu_attach_device,
 		.detach_dev	= s390_iommu_detach_device,
-		.map		= s390_iommu_map,
-		.unmap		= s390_iommu_unmap,
+		.map_pages	= s390_iommu_map_pages,
+		.unmap_pages	= s390_iommu_unmap_pages,
 		.iova_to_phys	= s390_iommu_iova_to_phys,
 		.free		= s390_domain_free,
 	}
author maintainer
#15 lore raw

Re: [PATCH v5 6/6] iommu/s390: Implement map_pages()/unmap_pages() instead of map()/unmap()

Quoted 97 lines · Matthew Rosato
Quoted 96 lines · Niklas Schnelle

While s390-iommu currently implements the map_page()/unmap_page() operations which only map/unmap a single page at a time the internal s390_iommu_update_trans() API already supports mapping/unmapping a range of pages at once. Take advantage of this by implementing the map_pages()/unmap_pages() operations instead thus allowing users of the IOMMU drivers to map multiple pages in a single call followed by a single I/O TLB flush if needed.

---
 drivers/iommu/s390-iommu.c | 48 +++++++++++++++++++++++++-------------
 1 file changed, 32 insertions(+), 16 deletions(-)
drivers/iommu/s390-iommu.c +25 -13
index ac200f0b81fa..7b92855135ac 100644
@@ -189,20 +189,15 @@ static void s390_iommu_release_device(struct device *dev)
 
 static int s390_iommu_update_trans(struct s390_domain *s390_domain,
 				   phys_addr_t pa, dma_addr_t dma_addr,
-				   size_t size, int flags)
+				   unsigned long nr_pages, int flags)
 {
 	phys_addr_t page_addr = pa & PAGE_MASK;
 	dma_addr_t start_dma_addr = dma_addr;
-	unsigned long irq_flags, nr_pages, i;
+	unsigned long irq_flags, i;
 	struct zpci_dev *zdev;
 	unsigned long *entry;
 	int rc = 0;
 
-	if (dma_addr < s390_domain->domain.geometry.aperture_start ||
-	    (dma_addr + size - 1) > s390_domain->domain.geometry.aperture_end)
-		return -EINVAL;
-
-	nr_pages = PAGE_ALIGN(size) >> PAGE_SHIFT;
 	if (!nr_pages)
 		return 0;
 
@@ -245,11 +240,24 @@ static int s390_iommu_update_trans(struct s390_domain *s390_domain,
 	return rc;
 }
 
-static int s390_iommu_map(struct iommu_domain *domain, unsigned long iova,
-			  phys_addr_t paddr, size_t size, int prot, gfp_t gfp)
+static int s390_iommu_map_pages(struct iommu_domain *domain,
+				unsigned long iova, phys_addr_t paddr,
+				size_t pgsize, size_t pgcount,
+				int prot, gfp_t gfp, size_t *mapped)
 {
 	struct s390_domain *s390_domain = to_s390_domain(domain);
 	int flags = ZPCI_PTE_VALID, rc = 0;
+	size_t size = pgcount << __ffs(pgsize);
+
+	if (pgsize != SZ_4K)
+		return -EINVAL;
+
+	if (iova < s390_domain->domain.geometry.aperture_start ||
+	    (iova + size - 1) > s390_domain->domain.geometry.aperture_end)
+		return -EINVAL;
+
+	if (!IS_ALIGNED(iova | paddr, pgsize))
+		return -EINVAL;
 
 	if (!(prot & IOMMU_READ))
 		return -EINVAL;
@@ -258,7 +266,9 @@ static int s390_iommu_map(struct iommu_domain *domain, unsigned long iova,
 		flags |= ZPCI_TABLE_PROTECTED;
 
 	rc = s390_iommu_update_trans(s390_domain, paddr, iova,
-				     size, flags);
+				     pgcount, flags);
+	if (!rc)
+		*mapped = size;
 
 	return rc;
 }
@@ -294,21 +304,27 @@ static phys_addr_t s390_iommu_iova_to_phys(struct iommu_domain *domain,
 	return phys;
 }
 
-static size_t s390_iommu_unmap(struct iommu_domain *domain,
-			       unsigned long iova, size_t size,
-			       struct iommu_iotlb_gather *gather)
+static size_t s390_iommu_unmap_pages(struct iommu_domain *domain,
+				     unsigned long iova,
+				     size_t pgsize, size_t pgcount,
+				     struct iommu_iotlb_gather *gather)
 {
 	struct s390_domain *s390_domain = to_s390_domain(domain);
+	size_t size = pgcount << __ffs(pgsize);
 	int flags = ZPCI_PTE_INVALID;
 	phys_addr_t paddr;
 	int rc;
 
Quoted 7 lines

drivers/iommu/s390-iommu.c static phys_addr_t s390_iommu_iova_to_phys(struct iommu_domain *domain, · line 321

Quoted 4 lines
drivers/iommu/s390-iommu.c +4 -0
+	if (iova < s390_domain->domain.geometry.aperture_start ||
+	    (iova + size - 1) > s390_domain->domain.geometry.aperture_end)
+		return 0;
+

Overall this LGTM and runs well with my testing. But I'm curious why we silently ignore an egregiously bad unmap request here? We've already done an -EINVAL for an attempt to map_pages() something outside of the aperture. If something still tries to unmap_pages() outside of the aperture, that seems like a bug? Maybe this should be surrounded by a if (WARN_ON(... || ...) to signify the unexpected behavior and then still return 0?

Well, the problem here is that .unmap_pages() returns size_t so 0 is kind of the only invalid value.But yes, a WARN_ON() seems warranted.

Quoted 24 lines

Otherwise:

Quoted 21 lines
drivers/iommu/s390-iommu.c +3 -3
 	paddr = s390_iommu_iova_to_phys(domain, iova);
 	if (!paddr)
 		return 0;
 
 	rc = s390_iommu_update_trans(s390_domain, paddr, iova,
-				     size, flags);
+				     pgcount, flags);
 	if (rc)
 		return 0;
 
@@ -354,8 +370,8 @@ static const struct iommu_ops s390_iommu_ops = {
 	.default_domain_ops = &(const struct iommu_domain_ops) {
 		.attach_dev	= s390_iommu_attach_device,
 		.detach_dev	= s390_iommu_detach_device,
-		.map		= s390_iommu_map,
-		.unmap		= s390_iommu_unmap,
+		.map_pages	= s390_iommu_map_pages,
+		.unmap_pages	= s390_iommu_unmap_pages,
 		.iova_to_phys	= s390_iommu_iova_to_phys,
 		.free		= s390_domain_free,
 	}