lkdtm: change snprintf to scnprintf for possible overflow
Subsystems (12)
PATCH 1/8 lkdtm: change snprintf to scnprintf for possible overflow
From: Silvio Cesare <[email protected]>
Change snprintf to scnprintf. There are generally two cases where using snprintf causes problems.
1) Uses of size += snprintf(buf, SIZE - size, fmt, ...)
In this case, if snprintf would have written more characters than what the buffer size (SIZE) is, then size will end up larger than SIZE. In later uses of snprintf, SIZE - size will result in a negative number, leading to problems. Note that size might already be too large by using size = snprintf before the code reaches a case of size += snprintf.
2) If size is ultimately used as a length parameter for a copy back to user space, then it will potentially allow for a buffer overflow and information disclosure when size is greater than SIZE. When the size is used to index the buffer directly, we can have memory corruption. This also means when size = snprintf... is used, it may also cause problems since size may become large. Copying to userspace is mitigated by the HARDENED_USERCOPY kernel configuration.
The solution to these issues is to use scnprintf which returns the number of characters actually written to the buffer, so the size variable will never exceed SIZE.
--- drivers/misc/lkdtm/core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
drivers/misc/lkdtm/core.c +2 -2
@@ -347,9 +347,9 @@ static ssize_t lkdtm_debugfs_read(struct file *f, char __user *user_buf,if (buf ==NULL )return -ENOMEM ; - n =snprintf (buf,PAGE_SIZE ,"Available crash types:\n" ); + n =scnprintf (buf,PAGE_SIZE ,"Available crash types:\n" );for (i =0 ; i <ARRAY_SIZE (crashtypes); i++) { - n +=snprintf (buf + n,PAGE_SIZE - n,"%s\n" , + n +=scnprintf (buf + n,PAGE_SIZE - n,"%s\n" , crashtypes[i].name); } buf[n] ='\0' ;
Signature · 1 line
2.19.2
PATCH 2/8 libertas: change snprintf to scnprintf for possible overflow
From: Silvio Cesare <[email protected]>
Change snprintf to scnprintf. There are generally two cases where using snprintf causes problems.
1) Uses of size += snprintf(buf, SIZE - size, fmt, ...)
In this case, if snprintf would have written more characters than what the buffer size (SIZE) is, then size will end up larger than SIZE. In later uses of snprintf, SIZE - size will result in a negative number, leading to problems. Note that size might already be too large by using size = snprintf before the code reaches a case of size += snprintf.
2) If size is ultimately used as a length parameter for a copy back to user space, then it will potentially allow for a buffer overflow and information disclosure when size is greater than SIZE. When the size is used to index the buffer directly, we can have memory corruption. This also means when size = snprintf... is used, it may also cause problems since size may become large. Copying to userspace is mitigated by the HARDENED_USERCOPY kernel configuration.
The solution to these issues is to use scnprintf which returns the number of characters actually written to the buffer, so the size variable will never exceed SIZE.
--- drivers/net/wireless/marvell/libertas/debugfs.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-)
drivers/net/wireless/marvell/libertas/debugfs.c +8 -8
@@ -41,9 +41,9 @@ static ssize_t lbs_dev_info(struct file *file, char __user *userbuf,if (!buf)return -ENOMEM ; - pos +=snprintf (buf+pos, len-pos,"state = %s\n" , + pos +=scnprintf (buf+pos, len-pos,"state = %s\n" , szStates[priv->connect_status]); - pos +=snprintf (buf+pos, len-pos,"region_code = %02x\n" , + pos +=scnprintf (buf+pos, len-pos,"region_code = %02x\n" , (u32 ) priv->regioncode); res =simple_read_from_buffer (userbuf, count, ppos, buf, pos);
@@ -105,7 +105,7 @@ static ssize_t lbs_sleepparams_read(struct file *file, char __user *userbuf,if (ret) goto out_unlock; - pos +=snprintf (buf, len,"%d %d %d %d %d %d\n" , sp.sp_error, + pos +=scnprintf (buf, len,"%d %d %d %d %d %d\n" , sp.sp_error, sp.sp_offset, sp.sp_stabletime, sp.sp_calcontrol, sp.sp_extsleepclk, sp.sp_reserved);
@@ -170,7 +170,7 @@ static ssize_t lbs_host_sleep_read(struct file *file, char __user *userbuf,if (!buf)return -ENOMEM ; - pos +=snprintf (buf, len,"%d\n" , priv->is_host_sleep_activated); + pos +=scnprintf (buf, len,"%d\n" , priv->is_host_sleep_activated); ret =simple_read_from_buffer (userbuf, count, ppos, buf, pos);
@@ -251,7 +251,7 @@ static ssize_t lbs_threshold_read(uint16_t tlv_type, uint16_t event_mask, freq = got->freq; events =le16_to_cpu (subscribed->events); - pos +=snprintf (buf, len,"%d %d %d\n" , value, freq, + pos +=scnprintf (buf, len,"%d %d %d\n" , value, freq, !!(events & event_mask)); }
@@ -446,7 +446,7 @@ static ssize_t lbs_rdmac_read(struct file *file, char __user *userbuf, ret =lbs_get_reg (priv,CMD_MAC_REG_ACCESS , priv->mac_offset, &val);mdelay (10 );if (!ret) { - pos =snprintf (buf, len,"MAC[0x%x] = 0x%08x\n" , + pos =scnprintf (buf, len,"MAC[0x%x] = 0x%08x\n" , priv->mac_offset, val); ret =simple_read_from_buffer (userbuf, count, ppos, buf, pos); }
@@ -516,7 +516,7 @@ static ssize_t lbs_rdbbp_read(struct file *file, char __user *userbuf, ret =lbs_get_reg (priv,CMD_BBP_REG_ACCESS , priv->bbp_offset, &val);mdelay (10 );if (!ret) { - pos =snprintf (buf, len,"BBP[0x%x] = 0x%08x\n" , + pos =scnprintf (buf, len,"BBP[0x%x] = 0x%08x\n" , priv->bbp_offset, val); ret =simple_read_from_buffer (userbuf, count, ppos, buf, pos); }
@@ -588,7 +588,7 @@ static ssize_t lbs_rdrf_read(struct file *file, char __user *userbuf, ret =lbs_get_reg (priv,CMD_RF_REG_ACCESS , priv->rf_offset, &val);mdelay (10 );if (!ret) { - pos =snprintf (buf, len,"RF[0x%x] = 0x%08x\n" , + pos =scnprintf (buf, len,"RF[0x%x] = 0x%08x\n" , priv->rf_offset, val); ret =simple_read_from_buffer (userbuf, count, ppos, buf, pos); }
Signature · 1 line
2.19.2
Re: [PATCH 2/8] libertas: change snprintf to scnprintf for possible overflow
Quoted 25 lines · Willy Tarreau
From: Silvio Cesare <[email protected]>
Change snprintf to scnprintf. There are generally two cases where using snprintf causes problems.
1) Uses of size +=
snprintf(buf, SIZE - size, fmt, ...)
In this case, if snprintf would have written more characters than what the buffer size (SIZE) is, then size will end up larger than SIZE. In later uses of snprintf, SIZE - size will result in a negative number, leading to problems. Note that size might already be too large by using size = snprintf before the code reaches a case of size += snprintf.2) If size is ultimately used as a length parameter for a copy back to user space, then it will potentially allow for a buffer overflow and information disclosure when size is greater than SIZE. When the size is used to index the buffer directly, we can have memory corruption. This also means when size = snprintf... is used, it may also cause problems since size may become large. Copying to userspace is mitigated by the
HARDENED_USERCOPYkernel configuration.The solution to these issues is to use scnprintf which returns the number of characters actually written to the buffer, so the size variable will never exceed SIZE.
Quoted 7 lines
Signed-off-by Silvio Cesare <[email protected]>Cc Kalle Valo <[email protected]>Cc Dan Carpenter <[email protected]>Cc Kees Cook <[email protected]>Cc Will Deacon <[email protected]>Cc Greg KH <[email protected]>Signed-off-by Willy Tarreau <[email protected]>
-Kees
Quoted 78 lines
--- drivers/net/wireless/marvell/libertas/debugfs.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-)drivers/net/wireless/marvell/libertas/debugfs.c +8
-9@@ -41,9 +41,9 @@ static ssize_t lbs_dev_info(struct file *file, char __user *userbuf,if (!buf)return -ENOMEM ; - pos +=snprintf (buf+pos, len-pos,"state = %s\n" , + pos +=scnprintf (buf+pos, len-pos,"state = %s\n" , szStates[priv->connect_status]); - pos +=snprintf (buf+pos, len-pos,"region_code = %02x\n" , + pos +=scnprintf (buf+pos, len-pos,"region_code = %02x\n" , (u32 ) priv->regioncode); res =simple_read_from_buffer (userbuf, count, ppos, buf, pos);@@ -105,7 +105,7 @@ static ssize_t lbs_sleepparams_read(struct file *file, char __user *userbuf,if (ret) goto out_unlock; - pos +=snprintf (buf, len,"%d %d %d %d %d %d\n" , sp.sp_error, + pos +=scnprintf (buf, len,"%d %d %d %d %d %d\n" , sp.sp_error, sp.sp_offset, sp.sp_stabletime, sp.sp_calcontrol, sp.sp_extsleepclk, sp.sp_reserved);@@ -170,7 +170,7 @@ static ssize_t lbs_host_sleep_read(struct file *file, char __user *userbuf,if (!buf)return -ENOMEM ; - pos +=snprintf (buf, len,"%d\n" , priv->is_host_sleep_activated); + pos +=scnprintf (buf, len,"%d\n" , priv->is_host_sleep_activated); ret =simple_read_from_buffer (userbuf, count, ppos, buf, pos);@@ -251,7 +251,7 @@ static ssize_t lbs_threshold_read(uint16_t tlv_type, uint16_t event_mask, freq = got->freq; events =le16_to_cpu (subscribed->events); - pos +=snprintf (buf, len,"%d %d %d\n" , value, freq, + pos +=scnprintf (buf, len,"%d %d %d\n" , value, freq, !!(events & event_mask)); }@@ -446,7 +446,7 @@ static ssize_t lbs_rdmac_read(struct file *file, char __user *userbuf, ret =lbs_get_reg (priv,CMD_MAC_REG_ACCESS , priv->mac_offset, &val);mdelay (10 );if (!ret) { - pos =snprintf (buf, len,"MAC[0x%x] = 0x%08x\n" , + pos =scnprintf (buf, len,"MAC[0x%x] = 0x%08x\n" , priv->mac_offset, val); ret =simple_read_from_buffer (userbuf, count, ppos, buf, pos); }@@ -516,7 +516,7 @@ static ssize_t lbs_rdbbp_read(struct file *file, char __user *userbuf, ret =lbs_get_reg (priv,CMD_BBP_REG_ACCESS , priv->bbp_offset, &val);mdelay (10 );if (!ret) { - pos =snprintf (buf, len,"BBP[0x%x] = 0x%08x\n" , + pos =scnprintf (buf, len,"BBP[0x%x] = 0x%08x\n" , priv->bbp_offset, val); ret =simple_read_from_buffer (userbuf, count, ppos, buf, pos); }@@ -588,7 +588,7 @@ static ssize_t lbs_rdrf_read(struct file *file, char __user *userbuf, ret =lbs_get_reg (priv,CMD_RF_REG_ACCESS , priv->rf_offset, &val);mdelay (10 );if (!ret) { - pos =snprintf (buf, len,"RF[0x%x] = 0x%08x\n" , + pos =scnprintf (buf, len,"RF[0x%x] = 0x%08x\n" , priv->rf_offset, val); ret =simple_read_from_buffer (userbuf, count, ppos, buf, pos); } --2.19.2
Signature · 1 line
Kees Cook
Re: [PATCH 2/8] libertas: change snprintf to scnprintf for possible overflow
In reply to Willy TarreauQuoted 24 lines · Willy Tarreau
From: Silvio Cesare <[email protected]>
Change snprintf to scnprintf. There are generally two cases where using snprintf causes problems.
1) Uses of size +=
snprintf(buf, SIZE - size, fmt, ...)
In this case, if snprintf would have written more characters than what the buffer size (SIZE) is, then size will end up larger than SIZE. In later uses of snprintf, SIZE - size will result in a negative number, leading to problems. Note that size might already be too large by using size = snprintf before the code reaches a case of size += snprintf.2) If size is ultimately used as a length parameter for a copy back to user space, then it will potentially allow for a buffer overflow and information disclosure when size is greater than SIZE. When the size is used to index the buffer directly, we can have memory corruption. This also means when size = snprintf... is used, it may also cause problems since size may become large. Copying to userspace is mitigated by the
HARDENED_USERCOPYkernel configuration.The solution to these issues is to use scnprintf which returns the number of characters actually written to the buffer, so the size variable will never exceed SIZE.
Quoted 7 lines
Signed-off-by Silvio Cesare <[email protected]>Cc Kalle Valo <[email protected]>Cc Dan Carpenter <[email protected]>Cc Kees Cook <[email protected]>Cc Will Deacon <[email protected]>Cc Greg KH <[email protected]>Signed-off-by Willy Tarreau <[email protected]>
I don't see any mention about which tree this should go to. Can I take this to wireless-drivers-next?
Signature · 1 line
Kalle Valo
Re: [PATCH 2/8] libertas: change snprintf to scnprintf for possible overflow
Quoted 34 lines · Kalle Valo
Quoted 24 lines · Willy Tarreau
From: Silvio Cesare <[email protected]>
Change snprintf to scnprintf. There are generally two cases where using snprintf causes problems.
1) Uses of size +=
snprintf(buf, SIZE - size, fmt, ...)
In this case, if snprintf would have written more characters than what the buffer size (SIZE) is, then size will end up larger than SIZE. In later uses of snprintf, SIZE - size will result in a negative number, leading to problems. Note that size might already be too large by using size = snprintf before the code reaches a case of size += snprintf.2) If size is ultimately used as a length parameter for a copy back to user space, then it will potentially allow for a buffer overflow and information disclosure when size is greater than SIZE. When the size is used to index the buffer directly, we can have memory corruption. This also means when size = snprintf... is used, it may also cause problems since size may become large. Copying to userspace is mitigated by the
HARDENED_USERCOPYkernel configuration.The solution to these issues is to use scnprintf which returns the number of characters actually written to the buffer, so the size variable will never exceed SIZE.
Quoted 7 lines
Signed-off-by Silvio Cesare <[email protected]>Cc Kalle Valo <[email protected]>Cc Dan Carpenter <[email protected]>Cc Kees Cook <[email protected]>Cc Will Deacon <[email protected]>Cc Greg KH <[email protected]>Signed-off-by Willy Tarreau <[email protected]>
Quoted 2 lines
I don't see any mention about which tree this should go to. Can I take this to wireless-drivers-next?
Possibly. It addresses a small memory disclosure issue when using debugfs, and as such it should probably also be submitted to stable branches, so please use the most suitable tree that doesn't add too much extra delay.
Thanks,
Willy
Re: [PATCH 2/8] libertas: change snprintf to scnprintf for possible overflow
Quoted 35 lines · Willy Tarreau
Quoted 34 lines · Kalle Valo
Quoted 31 lines · Willy Tarreau
From: Silvio Cesare <[email protected]>
Change snprintf to scnprintf. There are generally two cases where using snprintf causes problems.
1) Uses of size +=
snprintf(buf, SIZE - size, fmt, ...)
In this case, if snprintf would have written more characters than what the buffer size (SIZE) is, then size will end up larger than SIZE. In later uses of snprintf, SIZE - size will result in a negative number, leading to problems. Note that size might already be too large by using size = snprintf before the code reaches a case of size += snprintf.2) If size is ultimately used as a length parameter for a copy back to user space, then it will potentially allow for a buffer overflow and information disclosure when size is greater than SIZE. When the size is used to index the buffer directly, we can have memory corruption. This also means when size = snprintf... is used, it may also cause problems since size may become large. Copying to userspace is mitigated by the
HARDENED_USERCOPYkernel configuration.The solution to these issues is to use scnprintf which returns the number of characters actually written to the buffer, so the size variable will never exceed SIZE.
Signed-off-by Silvio Cesare <[email protected]>Cc Kalle Valo <[email protected]>Cc Dan Carpenter <[email protected]>Cc Kees Cook <[email protected]>Cc Will Deacon <[email protected]>Cc Greg KH <[email protected]>Signed-off-by Willy Tarreau <[email protected]>
Quoted 6 lines
Quoted 2 lines
I don't see any mention about which tree this should go to. Can I take this to wireless-drivers-next?
Possibly. It addresses a small memory disclosure issue when using debugfs, and as such it should probably also be submitted to stable branches, so please use the most suitable tree that doesn't add too much extra delay.
Ok, I'll queue this for 5.0 and apply it to wireless-drivers instead.
Signature · 1 line
Kalle Valo
Re: [PATCH 2/8] libertas: change snprintf to scnprintf for possible overflow
Quoted 1 line · Kalle Valo
Ok, I'll queue this for 5.0 and apply it to wireless-drivers instead.
Thank you!
Willy
PATCH 3/8 ocfs2: change snprintf to scnprintf for possible overflow
In reply to Willy TarreauFrom: Silvio Cesare <[email protected]>
Change snprintf to scnprintf. There are generally two cases where using snprintf causes problems.
1) Uses of size += snprintf(buf, SIZE - size, fmt, ...)
In this case, if snprintf would have written more characters than what the buffer size (SIZE) is, then size will end up larger than SIZE. In later uses of snprintf, SIZE - size will result in a negative number, leading to problems. Note that size might already be too large by using size = snprintf before the code reaches a case of size += snprintf.
2) If size is ultimately used as a length parameter for a copy back to user space, then it will potentially allow for a buffer overflow and information disclosure when size is greater than SIZE. When the size is used to index the buffer directly, we can have memory corruption. This also means when size = snprintf... is used, it may also cause problems since size may become large. Copying to userspace is mitigated by the HARDENED_USERCOPY kernel configuration.
The solution to these issues is to use scnprintf which returns the number of characters actually written to the buffer, so the size variable will never exceed SIZE.
--- fs/ocfs2/cluster/heartbeat.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)
fs/ocfs2/cluster/heartbeat.c +5 -5
@@ -1324,7 +1324,7 @@ static int o2hb_debug_open(struct inode *inode, struct file *file)case O2HB_DB_TYPE_REGION_NUMBER : reg = (struct o2hb_region *)db->db_data; - out +=snprintf (buf + out,PAGE_SIZE - out,"%d\n" , + out +=scnprintf (buf + out,PAGE_SIZE - out,"%d\n" , reg->hr_region_num); goto done;
@@ -1334,12 +1334,12 @@ static int o2hb_debug_open(struct inode *inode, struct file *file)/* If 0, it has never been set before */ if (lts) lts =jiffies_to_msecs (jiffies - lts); - out +=snprintf (buf + out,PAGE_SIZE - out,"%lu\n" , lts); + out +=scnprintf (buf + out,PAGE_SIZE - out,"%lu\n" , lts); goto done;case O2HB_DB_TYPE_REGION_PINNED : reg = (struct o2hb_region *)db->db_data; - out +=snprintf (buf + out,PAGE_SIZE - out,"%u\n" , + out +=scnprintf (buf + out,PAGE_SIZE - out,"%u\n" , !!reg->hr_item_pinned); goto done;
@@ -1348,8 +1348,8 @@ static int o2hb_debug_open(struct inode *inode, struct file *file) }while ((i =find_next_bit (map, db->db_len, i +1 )) < db->db_len) - out +=snprintf (buf + out,PAGE_SIZE - out,"%d " , i); - out +=snprintf (buf + out,PAGE_SIZE - out,"\n" ); + out +=scnprintf (buf + out,PAGE_SIZE - out,"%d " , i); + out +=scnprintf (buf + out,PAGE_SIZE - out,"\n" ); done:i_size_write (inode, out);
Signature · 1 line
2.19.2
Re: [PATCH 3/8] ocfs2: change snprintf to scnprintf for possible overflow
Quoted 25 lines · Willy Tarreau
From: Silvio Cesare <[email protected]>
Change snprintf to scnprintf. There are generally two cases where using snprintf causes problems.
1) Uses of size +=
snprintf(buf, SIZE - size, fmt, ...)
In this case, if snprintf would have written more characters than what the buffer size (SIZE) is, then size will end up larger than SIZE. In later uses of snprintf, SIZE - size will result in a negative number, leading to problems. Note that size might already be too large by using size = snprintf before the code reaches a case of size += snprintf.2) If size is ultimately used as a length parameter for a copy back to user space, then it will potentially allow for a buffer overflow and information disclosure when size is greater than SIZE. When the size is used to index the buffer directly, we can have memory corruption. This also means when size = snprintf... is used, it may also cause problems since size may become large. Copying to userspace is mitigated by the
HARDENED_USERCOPYkernel configuration.The solution to these issues is to use scnprintf which returns the number of characters actually written to the buffer, so the size variable will never exceed SIZE.
Quoted 8 lines
Signed-off-by Silvio Cesare <[email protected]>Cc Mark Fasheh <[email protected]>Cc Joel Becker <[email protected]>Cc Dan Carpenter <[email protected]>Cc Kees Cook <[email protected]>Cc Will Deacon <[email protected]>Cc Greg KH <[email protected]>Signed-off-by Willy Tarreau <[email protected]>
-Kees
Quoted 47 lines
--- fs/ocfs2/cluster/heartbeat.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)fs/ocfs2/cluster/heartbeat.c +5
-6@@ -1324,7 +1324,7 @@ static int o2hb_debug_open(struct inode *inode, struct file *file)case O2HB_DB_TYPE_REGION_NUMBER : reg = (struct o2hb_region *)db->db_data; - out +=snprintf (buf + out,PAGE_SIZE - out,"%d\n" , + out +=scnprintf (buf + out,PAGE_SIZE - out,"%d\n" , reg->hr_region_num); goto done;@@ -1334,12 +1334,12 @@ static int o2hb_debug_open(struct inode *inode, struct file *file)/* If 0, it has never been set before */ if (lts) lts =jiffies_to_msecs (jiffies - lts); - out +=snprintf (buf + out,PAGE_SIZE - out,"%lu\n" , lts); + out +=scnprintf (buf + out,PAGE_SIZE - out,"%lu\n" , lts); goto done;case O2HB_DB_TYPE_REGION_PINNED : reg = (struct o2hb_region *)db->db_data; - out +=snprintf (buf + out,PAGE_SIZE - out,"%u\n" , + out +=scnprintf (buf + out,PAGE_SIZE - out,"%u\n" , !!reg->hr_item_pinned); goto done;@@ -1348,8 +1348,8 @@ static int o2hb_debug_open(struct inode *inode, struct file *file) }while ((i =find_next_bit (map, db->db_len, i +1 )) < db->db_len) - out +=snprintf (buf + out,PAGE_SIZE - out,"%d " , i); - out +=snprintf (buf + out,PAGE_SIZE - out,"\n" ); + out +=scnprintf (buf + out,PAGE_SIZE - out,"%d " , i); + out +=scnprintf (buf + out,PAGE_SIZE - out,"\n" ); done:i_size_write (inode, out); --2.19.2
Signature · 1 line
Kees Cook
PATCH 4/8 ASoC: change snprintf to scnprintf for possible overflow
In reply to Willy TarreauFrom: Silvio Cesare <[email protected]>
Change snprintf to scnprintf. There are generally two cases where using snprintf causes problems.
1) Uses of size += snprintf(buf, SIZE - size, fmt, ...)
In this case, if snprintf would have written more characters than what the buffer size (SIZE) is, then size will end up larger than SIZE. In later uses of snprintf, SIZE - size will result in a negative number, leading to problems. Note that size might already be too large by using size = snprintf before the code reaches a case of size += snprintf.
2) If size is ultimately used as a length parameter for a copy back to user space, then it will potentially allow for a buffer overflow and information disclosure when size is greater than SIZE. When the size is used to index the buffer directly, we can have memory corruption. This also means when size = snprintf... is used, it may also cause problems since size may become large. Copying to userspace is mitigated by the HARDENED_USERCOPY kernel configuration.
The solution to these issues is to use scnprintf which returns the number of characters actually written to the buffer, so the size variable will never exceed SIZE.
--- sound/soc/fsl/imx-audmux.c | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-)
sound/soc/fsl/imx-audmux.c +12 -12
@@ -86,49 +86,49 @@ static ssize_t audmux_read_file(struct file *file, char __user *user_buf,if (!buf)return -ENOMEM ; - ret =snprintf (buf,PAGE_SIZE ,"PDCR: %08x\nPTCR: %08x\n" , + ret =scnprintf (buf,PAGE_SIZE ,"PDCR: %08x\nPTCR: %08x\n" , pdcr, ptcr);if (ptcr &IMX_AUDMUX_V2_PTCR_TFSDIR ) - ret +=snprintf (buf + ret,PAGE_SIZE - ret, + ret +=scnprintf (buf + ret,PAGE_SIZE - ret,"TxFS output from %s, " ,audmux_port_string ((ptcr >>27 ) &0x7 ));else - ret +=snprintf (buf + ret,PAGE_SIZE - ret, + ret +=scnprintf (buf + ret,PAGE_SIZE - ret,"TxFS input, " );if (ptcr &IMX_AUDMUX_V2_PTCR_TCLKDIR ) - ret +=snprintf (buf + ret,PAGE_SIZE - ret, + ret +=scnprintf (buf + ret,PAGE_SIZE - ret,"TxClk output from %s" ,audmux_port_string ((ptcr >>22 ) &0x7 ));else - ret +=snprintf (buf + ret,PAGE_SIZE - ret, + ret +=scnprintf (buf + ret,PAGE_SIZE - ret,"TxClk input" ); - ret +=snprintf (buf + ret,PAGE_SIZE - ret,"\n" ); + ret +=scnprintf (buf + ret,PAGE_SIZE - ret,"\n" );if (ptcr &IMX_AUDMUX_V2_PTCR_SYN ) { - ret +=snprintf (buf + ret,PAGE_SIZE - ret, + ret +=scnprintf (buf + ret,PAGE_SIZE - ret,"Port is symmetric" ); }else {if (ptcr &IMX_AUDMUX_V2_PTCR_RFSDIR ) - ret +=snprintf (buf + ret,PAGE_SIZE - ret, + ret +=scnprintf (buf + ret,PAGE_SIZE - ret,"RxFS output from %s, " ,audmux_port_string ((ptcr >>17 ) &0x7 ));else - ret +=snprintf (buf + ret,PAGE_SIZE - ret, + ret +=scnprintf (buf + ret,PAGE_SIZE - ret,"RxFS input, " );if (ptcr &IMX_AUDMUX_V2_PTCR_RCLKDIR ) - ret +=snprintf (buf + ret,PAGE_SIZE - ret, + ret +=scnprintf (buf + ret,PAGE_SIZE - ret,"RxClk output from %s" ,audmux_port_string ((ptcr >>12 ) &0x7 ));else - ret +=snprintf (buf + ret,PAGE_SIZE - ret, + ret +=scnprintf (buf + ret,PAGE_SIZE - ret,"RxClk input" ); } - ret +=snprintf (buf + ret,PAGE_SIZE - ret, + ret +=scnprintf (buf + ret,PAGE_SIZE - ret,"\nData received from %s\n" ,audmux_port_string ((pdcr >>13 ) &0x7 ));
Signature · 1 line
2.19.2
Re: [PATCH 4/8] ASoC: change snprintf to scnprintf for possible overflow
Quoted 25 lines · Willy Tarreau
From: Silvio Cesare <[email protected]>
Change snprintf to scnprintf. There are generally two cases where using snprintf causes problems.
1) Uses of size +=
snprintf(buf, SIZE - size, fmt, ...)
In this case, if snprintf would have written more characters than what the buffer size (SIZE) is, then size will end up larger than SIZE. In later uses of snprintf, SIZE - size will result in a negative number, leading to problems. Note that size might already be too large by using size = snprintf before the code reaches a case of size += snprintf.2) If size is ultimately used as a length parameter for a copy back to user space, then it will potentially allow for a buffer overflow and information disclosure when size is greater than SIZE. When the size is used to index the buffer directly, we can have memory corruption. This also means when size = snprintf... is used, it may also cause problems since size may become large. Copying to userspace is mitigated by the
HARDENED_USERCOPYkernel configuration.The solution to these issues is to use scnprintf which returns the number of characters actually written to the buffer, so the size variable will never exceed SIZE.
Quoted 10 lines
Signed-off-by Silvio Cesare <[email protected]>Cc Timur Tabi <[email protected]>Cc Nicolin Chen <[email protected]>Cc Xiubo Li <[email protected]>Cc Fabio Estevam <[email protected]>Cc Dan Carpenter <[email protected]>Cc Kees Cook <[email protected]>Cc Will Deacon <[email protected]>Cc Greg KH <[email protected]>Signed-off-by Willy Tarreau <[email protected]>
-Kees
Quoted 74 lines
--- sound/soc/fsl/imx-audmux.c | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-)sound/soc/fsl/imx-audmux.c +12
-13@@ -86,49 +86,49 @@ static ssize_t audmux_read_file(struct file *file, char __user *user_buf,if (!buf)return -ENOMEM ; - ret =snprintf (buf,PAGE_SIZE ,"PDCR: %08x\nPTCR: %08x\n" , + ret =scnprintf (buf,PAGE_SIZE ,"PDCR: %08x\nPTCR: %08x\n" , pdcr, ptcr);if (ptcr &IMX_AUDMUX_V2_PTCR_TFSDIR ) - ret +=snprintf (buf + ret,PAGE_SIZE - ret, + ret +=scnprintf (buf + ret,PAGE_SIZE - ret,"TxFS output from %s, " ,audmux_port_string ((ptcr >>27 ) &0x7 ));else - ret +=snprintf (buf + ret,PAGE_SIZE - ret, + ret +=scnprintf (buf + ret,PAGE_SIZE - ret,"TxFS input, " );if (ptcr &IMX_AUDMUX_V2_PTCR_TCLKDIR ) - ret +=snprintf (buf + ret,PAGE_SIZE - ret, + ret +=scnprintf (buf + ret,PAGE_SIZE - ret,"TxClk output from %s" ,audmux_port_string ((ptcr >>22 ) &0x7 ));else - ret +=snprintf (buf + ret,PAGE_SIZE - ret, + ret +=scnprintf (buf + ret,PAGE_SIZE - ret,"TxClk input" ); - ret +=snprintf (buf + ret,PAGE_SIZE - ret,"\n" ); + ret +=scnprintf (buf + ret,PAGE_SIZE - ret,"\n" );if (ptcr &IMX_AUDMUX_V2_PTCR_SYN ) { - ret +=snprintf (buf + ret,PAGE_SIZE - ret, + ret +=scnprintf (buf + ret,PAGE_SIZE - ret,"Port is symmetric" ); }else {if (ptcr &IMX_AUDMUX_V2_PTCR_RFSDIR ) - ret +=snprintf (buf + ret,PAGE_SIZE - ret, + ret +=scnprintf (buf + ret,PAGE_SIZE - ret,"RxFS output from %s, " ,audmux_port_string ((ptcr >>17 ) &0x7 ));else - ret +=snprintf (buf + ret,PAGE_SIZE - ret, + ret +=scnprintf (buf + ret,PAGE_SIZE - ret,"RxFS input, " );if (ptcr &IMX_AUDMUX_V2_PTCR_RCLKDIR ) - ret +=snprintf (buf + ret,PAGE_SIZE - ret, + ret +=scnprintf (buf + ret,PAGE_SIZE - ret,"RxClk output from %s" ,audmux_port_string ((ptcr >>12 ) &0x7 ));else - ret +=snprintf (buf + ret,PAGE_SIZE - ret, + ret +=scnprintf (buf + ret,PAGE_SIZE - ret,"RxClk input" ); } - ret +=snprintf (buf + ret,PAGE_SIZE - ret, + ret +=scnprintf (buf + ret,PAGE_SIZE - ret,"\nData received from %s\n" ,audmux_port_string ((pdcr >>13 ) &0x7 )); --2.19.2
Signature · 1 line
Kees Cook
Re: [PATCH 4/8] ASoC: change snprintf to scnprintf for possible overflow
In reply to Willy TarreauQuoted 20 lines · Willy Tarreau
From: Silvio Cesare <[email protected]>
Change snprintf to scnprintf. There are generally two cases where using snprintf causes problems.
1) Uses of size +=
snprintf(buf, SIZE - size, fmt, ...)
In this case, if snprintf would have written more characters than what the buffer size (SIZE) is, then size will end up larger than SIZE. In later uses of snprintf, SIZE - size will result in a negative number, leading to problems. Note that size might already be too large by using size = snprintf before the code reaches a case of size += snprintf.2) If size is ultimately used as a length parameter for a copy back to user space, then it will potentially allow for a buffer overflow and information disclosure when size is greater than SIZE. When the size is used to index the buffer directly, we can have memory corruption. This also means when size = snprintf... is used, it may also cause problems since size may become large. Copying to userspace is mitigated by the
HARDENED_USERCOPYkernel configuration.
Quoted 7 lines
The solution to these issues is to use scnprintf which returns the number of characters actually written to the buffer, so the size variable will never exceed SIZE.
Signed-off-by Silvio Cesare <[email protected]>Cc Nicolin Chen <[email protected]>
I think you probably need to run get_maintainer.pl for the patch and should send to Mark Brown and CC alsa-devel. And for subject, we usually use prefix "ASoC: imx-audmux:". Otherwise,
Thanks
Re: [PATCH 4/8] ASoC: change snprintf to scnprintf for possible overflow
Hi Nicolin,
Quoted 1 line · Nicolin Chen
I think you probably need to run get_maintainer.pl for the patch
That's what I did :-)
Quoted 1 line
and should send to Mark Brown and CC alsa-devel.
OK, thanks. At first when adding the CC lines I didn't know if the report was public or not, which is why I didn't add any list.
Quoted 4 lines
And for subject,
we usually use prefix "ASoC: imx-audmux:". Otherwise,Acked-by Nicolin Chen <[email protected]>
Thanks, I'll adjust this one accordingly and will resend it.
Willy
PATCH 5/8 scsi: lpfc: change snprintf to scnprintf for possible overflow
In reply to Willy TarreauFrom: Silvio Cesare <[email protected]>
Change snprintf to scnprintf. There are generally two cases where using snprintf causes problems.
1) Uses of size += snprintf(buf, SIZE - size, fmt, ...)
In this case, if snprintf would have written more characters than what the buffer size (SIZE) is, then size will end up larger than SIZE. In later uses of snprintf, SIZE - size will result in a negative number, leading to problems. Note that size might already be too large by using size = snprintf before the code reaches a case of size += snprintf.
2) If size is ultimately used as a length parameter for a copy back to user space, then it will potentially allow for a buffer overflow and information disclosure when size is greater than SIZE. When the size is used to index the buffer directly, we can have memory corruption. This also means when size = snprintf... is used, it may also cause problems since size may become large. Copying to userspace is mitigated by the HARDENED_USERCOPY kernel configuration.
The solution to these issues is to use scnprintf which returns the number of characters actually written to the buffer, so the size variable will never exceed SIZE.
--- drivers/scsi/lpfc/lpfc_debugfs.c | 450 +++++++++++++++---------------- 1 file changed, 225 insertions(+), 225 deletions(-)
drivers/scsi/lpfc/lpfc_debugfs.c +225 -225
@@ -170,7 +170,7 @@ lpfc_debugfs_disc_trc_data(struct lpfc_vport *vport, char *buf, int size)snprintf (buffer,LPFC_DEBUG_TRC_ENTRY_SIZE ,"%010d:%010d ms:%s\n" , dtp->seq_cnt, ms, dtp->fmt); - len +=snprintf (buf+len, size-len, buffer, + len +=scnprintf (buf+len, size-len, buffer, dtp->data1, dtp->data2, dtp->data3); }for (i =0 ; i < index; i++) {
@@ -181,7 +181,7 @@ lpfc_debugfs_disc_trc_data(struct lpfc_vport *vport, char *buf, int size)snprintf (buffer,LPFC_DEBUG_TRC_ENTRY_SIZE ,"%010d:%010d ms:%s\n" , dtp->seq_cnt, ms, dtp->fmt); - len +=snprintf (buf+len, size-len, buffer, + len +=scnprintf (buf+len, size-len, buffer, dtp->data1, dtp->data2, dtp->data3); }
@@ -236,7 +236,7 @@ lpfc_debugfs_slow_ring_trc_data(struct lpfc_hba *phba, char *buf, int size)snprintf (buffer,LPFC_DEBUG_TRC_ENTRY_SIZE ,"%010d:%010d ms:%s\n" , dtp->seq_cnt, ms, dtp->fmt); - len +=snprintf (buf+len, size-len, buffer, + len +=scnprintf (buf+len, size-len, buffer, dtp->data1, dtp->data2, dtp->data3); }for (i =0 ; i < index; i++) {
@@ -247,7 +247,7 @@ lpfc_debugfs_slow_ring_trc_data(struct lpfc_hba *phba, char *buf, int size)snprintf (buffer,LPFC_DEBUG_TRC_ENTRY_SIZE ,"%010d:%010d ms:%s\n" , dtp->seq_cnt, ms, dtp->fmt); - len +=snprintf (buf+len, size-len, buffer, + len +=scnprintf (buf+len, size-len, buffer, dtp->data1, dtp->data2, dtp->data3); }
@@ -307,7 +307,7 @@ lpfc_debugfs_hbqinfo_data(struct lpfc_hba *phba, char *buf, int size) i = lpfc_debugfs_last_hbq; - len +=snprintf (buf+len, size-len,"HBQ %d Info\n" , i); + len +=scnprintf (buf+len, size-len,"HBQ %d Info\n" , i); hbqs = &phba->hbqs[i]; posted =0 ;
@@ -315,21 +315,21 @@ lpfc_debugfs_hbqinfo_data(struct lpfc_hba *phba, char *buf, int size) posted++; hip = lpfc_hbq_defs[i]; - len +=snprintf (buf+len, size-len, + len +=scnprintf (buf+len, size-len,"idx:%d prof:%d rn:%d bufcnt:%d icnt:%d acnt:%d posted %d\n" , hip->hbq_index, hip->profile, hip->rn, hip->buffer_count, hip->init_count, hip->add_count, posted); raw_index = phba->hbq_get[i]; getidx =le32_to_cpu (raw_index); - len +=snprintf (buf+len, size-len, + len +=scnprintf (buf+len, size-len,"entries:%d bufcnt:%d Put:%d nPut:%d localGet:%d hbaGet:%d\n" , hbqs->entry_count, hbqs->buffer_count, hbqs->hbqPutIdx, hbqs->next_hbqPutIdx, hbqs->local_hbqGetIdx, getidx); hbqe = (struct lpfc_hbq_entry *) phba->hbqs[i].hbq_virt;for (j=0 ; j<hbqs->entry_count; j++) { - len += snprintf(buf+len, size-len, + len += scnprintf(buf+len, size-len, "%03d: %08x %04x %05x ", j, le32_to_cpu(hbqe->bde.addrLow), le32_to_cpu(hbqe->bde.tus.w),
@@ -341,14 +341,14 @@ lpfc_debugfs_hbqinfo_data(struct lpfc_hba *phba, char *buf, int size) low = hbqs->hbqPutIdx - posted;if (low >=0 ) {if ((j >= hbqs->hbqPutIdx) || (j < low)) { - len +=snprintf (buf+len, size-len,"Unused\n" ); + len +=scnprintf (buf+len, size-len,"Unused\n" ); goto skipit; } }else {if ((j >= hbqs->hbqPutIdx) && (j < (hbqs->entry_count+low))) { - len +=snprintf (buf+len, size-len,"Unused\n" ); + len +=scnprintf (buf+len, size-len,"Unused\n" ); goto skipit; } }
@@ -358,7 +358,7 @@ lpfc_debugfs_hbqinfo_data(struct lpfc_hba *phba, char *buf, int size) hbq_buf = container_of(d_buf, struct hbq_dmabuf, dbuf); phys = ((uint64_t )hbq_buf->dbuf.phys &0xffffffff );if (phys ==le32_to_cpu (hbqe->bde.addrLow)) { - len +=snprintf (buf+len, size-len, + len +=scnprintf (buf+len, size-len,"Buf%d: %p %06x\n" , i, hbq_buf->dbuf.virt, hbq_buf->tag); found =1 ;
@@ -367,7 +367,7 @@ lpfc_debugfs_hbqinfo_data(struct lpfc_hba *phba, char *buf, int size) i++; }if (!found) { - len +=snprintf (buf+len, size-len,"No DMAinfo?\n" ); + len +=scnprintf (buf+len, size-len,"No DMAinfo?\n" ); } skipit: hbqe++;
@@ -413,7 +413,7 @@ lpfc_debugfs_dumpHBASlim_data(struct lpfc_hba *phba, char *buf, int size) off =0 ;spin_lock_irq (&phba->hbalock); - len +=snprintf (buf+len, size-len,"HBA SLIM\n" ); + len +=scnprintf (buf+len, size-len,"HBA SLIM\n" );lpfc_memcpy_from_slim (buffer, phba->MBslimaddr + lpfc_debugfs_last_hba_slim_off,1024 );
@@ -427,7 +427,7 @@ lpfc_debugfs_dumpHBASlim_data(struct lpfc_hba *phba, char *buf, int size) i =1024 ;while (i >0 ) { - len +=snprintf (buf+len, size-len, + len +=scnprintf (buf+len, size-len,"%08x: %08x %08x %08x %08x %08x %08x %08x %08x\n" , off, *ptr, *(ptr+1 ), *(ptr+2 ), *(ptr+3 ), *(ptr+4 ), *(ptr+5 ), *(ptr+6 ), *(ptr+7 ));
@@ -471,11 +471,11 @@ lpfc_debugfs_dumpHostSlim_data(struct lpfc_hba *phba, char *buf, int size) off =0 ;spin_lock_irq (&phba->hbalock); - len +=snprintf (buf+len, size-len,"SLIM Mailbox\n" ); + len +=scnprintf (buf+len, size-len,"SLIM Mailbox\n" ); ptr = (uint32_t *)phba->slim2p.virt; i =sizeof (MAILBOX_t);while (i >0 ) { - len +=snprintf (buf+len, size-len, + len +=scnprintf (buf+len, size-len,"%08x: %08x %08x %08x %08x %08x %08x %08x %08x\n" , off, *ptr, *(ptr+1 ), *(ptr+2 ), *(ptr+3 ), *(ptr+4 ), *(ptr+5 ), *(ptr+6 ), *(ptr+7 ));
@@ -484,11 +484,11 @@ lpfc_debugfs_dumpHostSlim_data(struct lpfc_hba *phba, char *buf, int size) off += (8 *sizeof (uint32_t )); } - len +=snprintf (buf+len, size-len,"SLIM PCB\n" ); + len +=scnprintf (buf+len, size-len,"SLIM PCB\n" ); ptr = (uint32_t *)phba->pcb; i =sizeof (PCB_t);while (i >0 ) { - len +=snprintf (buf+len, size-len, + len +=scnprintf (buf+len, size-len,"%08x: %08x %08x %08x %08x %08x %08x %08x %08x\n" , off, *ptr, *(ptr+1 ), *(ptr+2 ), *(ptr+3 ), *(ptr+4 ), *(ptr+5 ), *(ptr+6 ), *(ptr+7 ));
@@ -501,7 +501,7 @@ lpfc_debugfs_dumpHostSlim_data(struct lpfc_hba *phba, char *buf, int size)for (i =0 ; i <4 ; i++) { pgpp = &phba->port_gp[i]; pring = &psli->sli3_ring[i]; - len +=snprintf (buf+len, size-len, + len +=scnprintf (buf+len, size-len,"Ring %d: CMD GetInx:%d " "(Max:%d Next:%d " "Local:%d flg:x%x) "
@@ -518,7 +518,7 @@ lpfc_debugfs_dumpHostSlim_data(struct lpfc_hba *phba, char *buf, int size) word1 =readl (phba->CAregaddr); word2 =readl (phba->HSregaddr); word3 =readl (phba->HCregaddr); - len +=snprintf (buf+len, size-len,"HA:%08x CA:%08x HS:%08x " + len +=scnprintf (buf+len, size-len,"HA:%08x CA:%08x HS:%08x " "HC:%08x\n" , word0, word1, word2, word3); }spin_unlock_irq (&phba->hbalock);
@@ -556,12 +556,12 @@ lpfc_debugfs_nodelist_data(struct lpfc_vport *vport, char *buf, int size) cnt = (LPFC_NODELIST_SIZE /LPFC_NODELIST_ENTRY_SIZE ); outio =0 ; - len +=snprintf (buf+len, size-len,"\nFCP Nodelist Entries ...\n" ); + len +=scnprintf (buf+len, size-len,"\nFCP Nodelist Entries ...\n" );spin_lock_irq (shost->host_lock);list_for_each_entry (ndlp, &vport->fc_nodes, nlp_listp) { iocnt =0 ;if (!cnt) { - len +=snprintf (buf+len, size-len, + len +=scnprintf (buf+len, size-len,"Missing Nodelist Entries\n" );break ; }
@@ -599,61 +599,61 @@ lpfc_debugfs_nodelist_data(struct lpfc_vport *vport, char *buf, int size)default : statep ="UNKNOWN" ; } - len +=snprintf (buf+len, size-len,"%s DID:x%06x " , + len +=scnprintf (buf+len, size-len,"%s DID:x%06x " , statep, ndlp->nlp_DID); - len +=snprintf (buf+len, size-len, + len +=scnprintf (buf+len, size-len,"WWPN x%llx " ,wwn_to_u64 (ndlp->nlp_portname.u.wwn)); - len +=snprintf (buf+len, size-len, + len +=scnprintf (buf+len, size-len,"WWNN x%llx " ,wwn_to_u64 (ndlp->nlp_nodename.u.wwn));if (ndlp->nlp_flag &NLP_RPI_REGISTERED ) - len +=snprintf (buf+len, size-len,"RPI:%03d " , + len +=scnprintf (buf+len, size-len,"RPI:%03d " , ndlp->nlp_rpi);else - len +=snprintf (buf+len, size-len,"RPI:none " ); - len +=snprintf (buf+len, size-len,"flag:x%08x " , + len +=scnprintf (buf+len, size-len,"RPI:none " ); + len +=scnprintf (buf+len, size-len,"flag:x%08x " , ndlp->nlp_flag);if (!ndlp->nlp_type) - len +=snprintf (buf+len, size-len,"UNKNOWN_TYPE " ); + len +=scnprintf (buf+len, size-len,"UNKNOWN_TYPE " );if (ndlp->nlp_type &NLP_FC_NODE ) - len +=snprintf (buf+len, size-len,"FC_NODE " ); + len +=scnprintf (buf+len, size-len,"FC_NODE " );if (ndlp->nlp_type &NLP_FABRIC ) { - len +=snprintf (buf+len, size-len,"FABRIC " ); + len +=scnprintf (buf+len, size-len,"FABRIC " ); iocnt =0 ; }if (ndlp->nlp_type &NLP_FCP_TARGET ) - len +=snprintf (buf+len, size-len,"FCP_TGT sid:%d " , + len +=scnprintf (buf+len, size-len,"FCP_TGT sid:%d " , ndlp->nlp_sid);if (ndlp->nlp_type &NLP_FCP_INITIATOR ) - len +=snprintf (buf+len, size-len,"FCP_INITIATOR " ); + len +=scnprintf (buf+len, size-len,"FCP_INITIATOR " );if (ndlp->nlp_type &NLP_NVME_TARGET ) - len +=snprintf (buf + len, + len +=scnprintf (buf + len, size - len,"NVME_TGT sid:%d " ,NLP_NO_SID );if (ndlp->nlp_type &NLP_NVME_INITIATOR ) - len +=snprintf (buf + len, + len +=scnprintf (buf + len, size - len,"NVME_INITIATOR " ); - len +=snprintf (buf+len, size-len,"usgmap:%x " , + len +=scnprintf (buf+len, size-len,"usgmap:%x " , ndlp->nlp_usg_map); - len +=snprintf (buf+len, size-len,"refcnt:%x" , + len +=scnprintf (buf+len, size-len,"refcnt:%x" ,kref_read (&ndlp->kref));if (iocnt) { i =atomic_read (&ndlp->cmd_pending); - len +=snprintf (buf + len, size - len, + len +=scnprintf (buf + len, size - len," OutIO:x%x Qdepth x%x" , i, ndlp->cmd_qdepth); outio += i; } - len +=snprintf (buf+len, size-len,"\n" ); + len +=scnprintf (buf+len, size-len,"\n" ); }spin_unlock_irq (shost->host_lock); - len +=snprintf (buf + len, size - len, + len +=scnprintf (buf + len, size - len,"\nOutstanding IO x%x\n" , outio);if (phba->nvmet_support && phba->targetport && (vport == phba->pport)) { - len +=snprintf (buf + len, size - len, + len +=scnprintf (buf + len, size - len,"\nNVME Targetport Entry ...\n" );/* Port state is only one of two values for now. */
@@ -661,18 +661,18 @@ lpfc_debugfs_nodelist_data(struct lpfc_vport *vport, char *buf, int size) statep ="REGISTERED" ; else statep ="INIT" ; - len +=snprintf (buf + len, size - len, + len +=scnprintf (buf + len, size - len,"TGT WWNN x%llx WWPN x%llx State %s\n" ,wwn_to_u64 (vport->fc_nodename.u.wwn),wwn_to_u64 (vport->fc_portname.u.wwn), statep); - len +=snprintf (buf + len, size - len, + len +=scnprintf (buf + len, size - len," Targetport DID x%06x\n" , phba->targetport->port_id); goto out_exit; } - len +=snprintf (buf + len, size - len, + len +=scnprintf (buf + len, size - len,"\nNVME Lport/Rport Entries ...\n" ); localport = vport->localport;
@@ -687,11 +687,11 @@ lpfc_debugfs_nodelist_data(struct lpfc_vport *vport, char *buf, int size)else statep ="UNKNOWN " ; - len +=snprintf (buf + len, size - len, + len +=scnprintf (buf + len, size - len,"Lport DID x%06x PortState %s\n" , localport->port_id, statep); - len +=snprintf (buf + len, size - len,"\tRport List:\n" ); + len +=scnprintf (buf + len, size - len,"\tRport List:\n" );list_for_each_entry (ndlp, &vport->fc_nodes, nlp_listp) {/* local short-hand pointer. */ spin_lock (&phba->hbalock);
@@ -718,32 +718,32 @@ lpfc_debugfs_nodelist_data(struct lpfc_vport *vport, char *buf, int size) }/* Tab in to show lport ownership. */ - len +=snprintf (buf + len, size - len, + len +=scnprintf (buf + len, size - len,"\t%s Port ID:x%06x " , statep, nrport->port_id); - len +=snprintf (buf + len, size - len,"WWPN x%llx " , + len +=scnprintf (buf + len, size - len,"WWPN x%llx " , nrport->port_name); - len +=snprintf (buf + len, size - len,"WWNN x%llx " , + len +=scnprintf (buf + len, size - len,"WWNN x%llx " , nrport->node_name);/* An NVME rport can have multiple roles. */ if (nrport->port_role &FC_PORT_ROLE_NVME_INITIATOR ) - len +=snprintf (buf + len, size - len, + len +=scnprintf (buf + len, size - len,"INITIATOR " );if (nrport->port_role &FC_PORT_ROLE_NVME_TARGET ) - len +=snprintf (buf + len, size - len, + len +=scnprintf (buf + len, size - len,"TARGET " );if (nrport->port_role &FC_PORT_ROLE_NVME_DISCOVERY ) - len +=snprintf (buf + len, size - len, + len +=scnprintf (buf + len, size - len,"DISCSRVC " );if (nrport->port_role & ~(FC_PORT_ROLE_NVME_INITIATOR |FC_PORT_ROLE_NVME_TARGET |FC_PORT_ROLE_NVME_DISCOVERY )) - len +=snprintf (buf + len, size - len, + len +=scnprintf (buf + len, size - len,"UNKNOWN ROLE x%x" , nrport->port_role);/* Terminate the string. */ - len +=snprintf (buf + len, size - len,"\n" ); + len +=scnprintf (buf + len, size - len,"\n" ); }spin_unlock_irq (shost->host_lock);
@@ -782,35 +782,35 @@ lpfc_debugfs_nvmestat_data(struct lpfc_vport *vport, char *buf, int size)if (!phba->targetport)return len; tgtp = (struct lpfc_nvmet_tgtport *)phba->targetport->private; - len +=snprintf (buf + len, size - len, + len +=scnprintf (buf + len, size - len,"\nNVME Targetport Statistics\n" ); - len +=snprintf (buf + len, size - len, + len +=scnprintf (buf + len, size - len,"LS: Rcv %08x Drop %08x Abort %08x\n" ,atomic_read (&tgtp->rcv_ls_req_in),atomic_read (&tgtp->rcv_ls_req_drop),atomic_read (&tgtp->xmt_ls_abort));if (atomic_read (&tgtp->rcv_ls_req_in) !=atomic_read (&tgtp->rcv_ls_req_out)) { - len +=snprintf (buf + len, size - len, + len +=scnprintf (buf + len, size - len,"Rcv LS: in %08x != out %08x\n" ,atomic_read (&tgtp->rcv_ls_req_in),atomic_read (&tgtp->rcv_ls_req_out)); } - len +=snprintf (buf + len, size - len, + len +=scnprintf (buf + len, size - len,"LS: Xmt %08x Drop %08x Cmpl %08x\n" ,atomic_read (&tgtp->xmt_ls_rsp),atomic_read (&tgtp->xmt_ls_drop),atomic_read (&tgtp->xmt_ls_rsp_cmpl)); - len +=snprintf (buf + len, size - len, + len +=scnprintf (buf + len, size - len,"LS: RSP Abort %08x xb %08x Err %08x\n" ,atomic_read (&tgtp->xmt_ls_rsp_aborted),atomic_read (&tgtp->xmt_ls_rsp_xb_set),atomic_read (&tgtp->xmt_ls_rsp_error)); - len += snprintf(buf + len, size - len, + len += scnprintf(buf + len, size - len, "FCP: Rcv %08x Defer %08x Release %08x " "Drop %08x\n", atomic_read(&tgtp->rcv_fcp_cmd_in),
@@ -820,13 +820,13 @@ lpfc_debugfs_nvmestat_data(struct lpfc_vport *vport, char *buf, int size)if (atomic_read (&tgtp->rcv_fcp_cmd_in) !=atomic_read (&tgtp->rcv_fcp_cmd_out)) { - len +=snprintf (buf + len, size - len, + len +=scnprintf (buf + len, size - len,"Rcv FCP: in %08x != out %08x\n" ,atomic_read (&tgtp->rcv_fcp_cmd_in),atomic_read (&tgtp->rcv_fcp_cmd_out)); } - len += snprintf(buf + len, size - len, + len += scnprintf(buf + len, size - len, "FCP Rsp: read %08x readrsp %08x " "write %08x rsp %08x\n", atomic_read(&tgtp->xmt_fcp_read),
@@ -834,31 +834,31 @@ lpfc_debugfs_nvmestat_data(struct lpfc_vport *vport, char *buf, int size)atomic_read (&tgtp->xmt_fcp_write), atomic_read(&tgtp->xmt_fcp_rsp)); - len +=snprintf (buf + len, size - len, + len +=scnprintf (buf + len, size - len,"FCP Rsp Cmpl: %08x err %08x drop %08x\n" ,atomic_read (&tgtp->xmt_fcp_rsp_cmpl),atomic_read (&tgtp->xmt_fcp_rsp_error),atomic_read (&tgtp->xmt_fcp_rsp_drop)); - len +=snprintf (buf + len, size - len, + len +=scnprintf (buf + len, size - len,"FCP Rsp Abort: %08x xb %08x xricqe %08x\n" ,atomic_read (&tgtp->xmt_fcp_rsp_aborted),atomic_read (&tgtp->xmt_fcp_rsp_xb_set),atomic_read (&tgtp->xmt_fcp_xri_abort_cqe)); - len +=snprintf (buf + len, size - len, + len +=scnprintf (buf + len, size - len,"ABORT: Xmt %08x Cmpl %08x\n" ,atomic_read (&tgtp->xmt_fcp_abort),atomic_read (&tgtp->xmt_fcp_abort_cmpl)); - len +=snprintf (buf + len, size - len, + len +=scnprintf (buf + len, size - len,"ABORT: Sol %08x Usol %08x Err %08x Cmpl %08x" ,atomic_read (&tgtp->xmt_abort_sol),atomic_read (&tgtp->xmt_abort_unsol),atomic_read (&tgtp->xmt_abort_rsp),atomic_read (&tgtp->xmt_abort_rsp_error)); - len +=snprintf (buf + len, size - len,"\n" ); + len +=scnprintf (buf + len, size - len,"\n" ); cnt =0 ;spin_lock (&phba->sli4_hba.abts_nvme_buf_list_lock);
@@ -869,7 +869,7 @@ lpfc_debugfs_nvmestat_data(struct lpfc_vport *vport, char *buf, int size) }spin_unlock (&phba->sli4_hba.abts_nvme_buf_list_lock);if (cnt) { - len +=snprintf (buf + len, size - len, + len +=scnprintf (buf + len, size - len,"ABORT: %d ctx entries\n" , cnt);spin_lock (&phba->sli4_hba.abts_nvme_buf_list_lock); list_for_each_entry_safe(ctxp, next_ctxp,
@@ -877,7 +877,7 @@ lpfc_debugfs_nvmestat_data(struct lpfc_vport *vport, char *buf, int size) list) {if (len >= (size -LPFC_DEBUG_OUT_LINE_SZ ))break ; - len += snprintf(buf + len, size - len, + len += scnprintf(buf + len, size - len, "Entry: oxid %x state %x " "flag %x\n", ctxp->oxid, ctxp->state,
@@ -891,7 +891,7 @@ lpfc_debugfs_nvmestat_data(struct lpfc_vport *vport, char *buf, int size) tot +=atomic_read (&tgtp->xmt_fcp_release); tot =atomic_read (&tgtp->rcv_fcp_cmd_in) - tot; - len += snprintf(buf + len, size - len, + len += scnprintf(buf + len, size - len, "IO_CTX: %08x WAIT: cur %08x tot %08x\n" "CTX Outstanding %08llx\n", phba->sli4_hba.nvmet_xri_cnt,
@@ -909,10 +909,10 @@ lpfc_debugfs_nvmestat_data(struct lpfc_vport *vport, char *buf, int size)if (!lport)return len; - len +=snprintf (buf + len, size - len, + len +=scnprintf (buf + len, size - len,"\nNVME Lport Statistics\n" ); - len +=snprintf (buf + len, size - len, + len +=scnprintf (buf + len, size - len,"LS: Xmt %016x Cmpl %016x\n" ,atomic_read (&lport->fc4NvmeLsRequests),atomic_read (&lport->fc4NvmeLsCmpls));
@@ -936,20 +936,20 @@ lpfc_debugfs_nvmestat_data(struct lpfc_vport *vport, char *buf, int size)if (i >=32 )continue ; - len +=snprintf (buf + len,PAGE_SIZE - len, + len +=scnprintf (buf + len,PAGE_SIZE - len,"FCP (%d): Rd %016llx Wr %016llx " "IO %016llx " , i, data1, data2, data3); - len +=snprintf (buf + len,PAGE_SIZE - len, + len +=scnprintf (buf + len,PAGE_SIZE - len,"Cmpl %016llx OutIO %016llx\n" , tot, ((data1 + data2 + data3) - tot)); } - len +=snprintf (buf + len,PAGE_SIZE - len, + len +=scnprintf (buf + len,PAGE_SIZE - len,"Total FCP Cmpl %016llx Issue %016llx " "OutIO %016llx\n" , totin, totout, totout - totin); - len += snprintf(buf + len, size - len, + len += scnprintf(buf + len, size - len, "LS Xmt Err: Abrt %08x Err %08x " "Cmpl Err: xb %08x Err %08x\n", atomic_read(&lport->xmt_ls_abort),
@@ -957,7 +957,7 @@ lpfc_debugfs_nvmestat_data(struct lpfc_vport *vport, char *buf, int size)atomic_read (&lport->cmpl_ls_xb), atomic_read(&lport->cmpl_ls_err)); - len += snprintf(buf + len, size - len, + len += scnprintf(buf + len, size - len, "FCP Xmt Err: noxri %06x nondlp %06x " "qdepth %06x wqerr %06x err %06x Abrt %06x\n", atomic_read(&lport->xmt_fcp_noxri),
@@ -967,7 +967,7 @@ lpfc_debugfs_nvmestat_data(struct lpfc_vport *vport, char *buf, int size)atomic_read (&lport->xmt_fcp_err), atomic_read(&lport->xmt_fcp_abort)); - len +=snprintf (buf + len, size - len, + len +=scnprintf (buf + len, size - len,"FCP Cmpl Err: xb %08x Err %08x\n" ,atomic_read (&lport->cmpl_fcp_xb),atomic_read (&lport->cmpl_fcp_err));
@@ -999,58 +999,58 @@ lpfc_debugfs_nvmektime_data(struct lpfc_vport *vport, char *buf, int size)if (phba->nvmet_support ==0 ) {/* NVME Initiator */ - len +=snprintf (buf + len,PAGE_SIZE - len, + len +=scnprintf (buf + len,PAGE_SIZE - len,"ktime %s: Total Samples: %lld\n" , (phba->ktime_on ?"Enabled" :"Disabled" ), phba->ktime_data_samples);if (phba->ktime_data_samples ==0 )return len; - len +=snprintf ( + len +=scnprintf ( buf + len,PAGE_SIZE - len,"Segment 1: Last NVME Cmd cmpl " "done -to- Start of next NVME cnd (in driver)\n" ); - len +=snprintf ( + len +=scnprintf ( buf + len,PAGE_SIZE - len,"avg:%08lld min:%08lld max %08lld\n" ,div_u64 (phba->ktime_seg1_total, phba->ktime_data_samples), phba->ktime_seg1_min, phba->ktime_seg1_max); - len +=snprintf ( + len +=scnprintf ( buf + len,PAGE_SIZE - len,"Segment 2: Driver start of NVME cmd " "-to- Firmware WQ doorbell\n" ); - len +=snprintf ( + len +=scnprintf ( buf + len,PAGE_SIZE - len,"avg:%08lld min:%08lld max %08lld\n" ,div_u64 (phba->ktime_seg2_total, phba->ktime_data_samples), phba->ktime_seg2_min, phba->ktime_seg2_max); - len +=snprintf ( + len +=scnprintf ( buf + len,PAGE_SIZE - len,"Segment 3: Firmware WQ doorbell -to- " "MSI-X ISR cmpl\n" ); - len +=snprintf ( + len +=scnprintf ( buf + len,PAGE_SIZE - len,"avg:%08lld min:%08lld max %08lld\n" ,div_u64 (phba->ktime_seg3_total, phba->ktime_data_samples), phba->ktime_seg3_min, phba->ktime_seg3_max); - len +=snprintf ( + len +=scnprintf ( buf + len,PAGE_SIZE - len,"Segment 4: MSI-X ISR cmpl -to- " "NVME cmpl done\n" ); - len +=snprintf ( + len +=scnprintf ( buf + len,PAGE_SIZE - len,"avg:%08lld min:%08lld max %08lld\n" ,div_u64 (phba->ktime_seg4_total, phba->ktime_data_samples), phba->ktime_seg4_min, phba->ktime_seg4_max); - len += snprintf( + len += scnprintf( buf + len, PAGE_SIZE - len, "Total IO avg time: %08lld\n", div_u64(phba->ktime_seg1_total +
@@ -1062,7 +1062,7 @@ lpfc_debugfs_nvmektime_data(struct lpfc_vport *vport, char *buf, int size) }/* NVME Target */ - len += snprintf(buf + len, PAGE_SIZE-len, + len += scnprintf(buf + len, PAGE_SIZE-len, "ktime %s: Total Samples: %lld %lld\n", (phba->ktime_on ? "Enabled" : "Disabled"), phba->ktime_data_samples,
@@ -1070,46 +1070,46 @@ lpfc_debugfs_nvmektime_data(struct lpfc_vport *vport, char *buf, int size)if (phba->ktime_data_samples ==0 )return len; - len +=snprintf (buf + len,PAGE_SIZE -len, + len +=scnprintf (buf + len,PAGE_SIZE -len,"Segment 1: MSI-X ISR Rcv cmd -to- " "cmd pass to NVME Layer\n" ); - len +=snprintf (buf + len,PAGE_SIZE -len, + len +=scnprintf (buf + len,PAGE_SIZE -len,"avg:%08lld min:%08lld max %08lld\n" ,div_u64 (phba->ktime_seg1_total, phba->ktime_data_samples), phba->ktime_seg1_min, phba->ktime_seg1_max); - len +=snprintf (buf + len,PAGE_SIZE -len, + len +=scnprintf (buf + len,PAGE_SIZE -len,"Segment 2: cmd pass to NVME Layer- " "-to- Driver rcv cmd OP (action)\n" ); - len +=snprintf (buf + len,PAGE_SIZE -len, + len +=scnprintf (buf + len,PAGE_SIZE -len,"avg:%08lld min:%08lld max %08lld\n" ,div_u64 (phba->ktime_seg2_total, phba->ktime_data_samples), phba->ktime_seg2_min, phba->ktime_seg2_max); - len +=snprintf (buf + len,PAGE_SIZE -len, + len +=scnprintf (buf + len,PAGE_SIZE -len,"Segment 3: Driver rcv cmd OP -to- " "Firmware WQ doorbell: cmd\n" ); - len +=snprintf (buf + len,PAGE_SIZE -len, + len +=scnprintf (buf + len,PAGE_SIZE -len,"avg:%08lld min:%08lld max %08lld\n" ,div_u64 (phba->ktime_seg3_total, phba->ktime_data_samples), phba->ktime_seg3_min, phba->ktime_seg3_max); - len +=snprintf (buf + len,PAGE_SIZE -len, + len +=scnprintf (buf + len,PAGE_SIZE -len,"Segment 4: Firmware WQ doorbell: cmd " "-to- MSI-X ISR for cmd cmpl\n" ); - len +=snprintf (buf + len,PAGE_SIZE -len, + len +=scnprintf (buf + len,PAGE_SIZE -len,"avg:%08lld min:%08lld max %08lld\n" ,div_u64 (phba->ktime_seg4_total, phba->ktime_data_samples), phba->ktime_seg4_min, phba->ktime_seg4_max); - len +=snprintf (buf + len,PAGE_SIZE -len, + len +=scnprintf (buf + len,PAGE_SIZE -len,"Segment 5: MSI-X ISR for cmd cmpl " "-to- NVME layer passed cmd done\n" ); - len += snprintf(buf + len, PAGE_SIZE-len, + len += scnprintf(buf + len, PAGE_SIZE-len, "avg:%08lld min:%08lld max %08lld\n", div_u64(phba->ktime_seg5_total, phba->ktime_data_samples),
@@ -1117,10 +1117,10 @@ lpfc_debugfs_nvmektime_data(struct lpfc_vport *vport, char *buf, int size) phba->ktime_seg5_max);if (phba->ktime_status_samples ==0 ) { - len +=snprintf (buf + len,PAGE_SIZE -len, + len +=scnprintf (buf + len,PAGE_SIZE -len,"Total: cmd received by MSI-X ISR " "-to- cmd completed on wire\n" ); - len += snprintf(buf + len, PAGE_SIZE-len, + len += scnprintf(buf + len, PAGE_SIZE-len, "avg:%08lld min:%08lld " "max %08lld\n", div_u64(phba->ktime_seg10_total,
@@ -1130,46 +1130,46 @@ lpfc_debugfs_nvmektime_data(struct lpfc_vport *vport, char *buf, int size)return len; } - len +=snprintf (buf + len,PAGE_SIZE -len, + len +=scnprintf (buf + len,PAGE_SIZE -len,"Segment 6: NVME layer passed cmd done " "-to- Driver rcv rsp status OP\n" ); - len +=snprintf (buf + len,PAGE_SIZE -len, + len +=scnprintf (buf + len,PAGE_SIZE -len,"avg:%08lld min:%08lld max %08lld\n" ,div_u64 (phba->ktime_seg6_total, phba->ktime_status_samples), phba->ktime_seg6_min, phba->ktime_seg6_max); - len +=snprintf (buf + len,PAGE_SIZE -len, + len +=scnprintf (buf + len,PAGE_SIZE -len,"Segment 7: Driver rcv rsp status OP " "-to- Firmware WQ doorbell: status\n" ); - len +=snprintf (buf + len,PAGE_SIZE -len, + len +=scnprintf (buf + len,PAGE_SIZE -len,"avg:%08lld min:%08lld max %08lld\n" ,div_u64 (phba->ktime_seg7_total, phba->ktime_status_samples), phba->ktime_seg7_min, phba->ktime_seg7_max); - len +=snprintf (buf + len,PAGE_SIZE -len, + len +=scnprintf (buf + len,PAGE_SIZE -len,"Segment 8: Firmware WQ doorbell: status" " -to- MSI-X ISR for status cmpl\n" ); - len +=snprintf (buf + len,PAGE_SIZE -len, + len +=scnprintf (buf + len,PAGE_SIZE -len,"avg:%08lld min:%08lld max %08lld\n" ,div_u64 (phba->ktime_seg8_total, phba->ktime_status_samples), phba->ktime_seg8_min, phba->ktime_seg8_max); - len +=snprintf (buf + len,PAGE_SIZE -len, + len +=scnprintf (buf + len,PAGE_SIZE -len,"Segment 9: MSI-X ISR for status cmpl " "-to- NVME layer passed status done\n" ); - len +=snprintf (buf + len,PAGE_SIZE -len, + len +=scnprintf (buf + len,PAGE_SIZE -len,"avg:%08lld min:%08lld max %08lld\n" ,div_u64 (phba->ktime_seg9_total, phba->ktime_status_samples), phba->ktime_seg9_min, phba->ktime_seg9_max); - len +=snprintf (buf + len,PAGE_SIZE -len, + len +=scnprintf (buf + len,PAGE_SIZE -len,"Total: cmd received by MSI-X ISR -to- " "cmd completed on wire\n" ); - len += snprintf(buf + len, PAGE_SIZE-len, + len += scnprintf(buf + len, PAGE_SIZE-len, "avg:%08lld min:%08lld max %08lld\n", div_u64(phba->ktime_seg10_total, phba->ktime_status_samples),
@@ -1204,7 +1204,7 @@ lpfc_debugfs_nvmeio_trc_data(struct lpfc_hba *phba, char *buf, int size) (phba->nvmeio_trc_size -1 ); skip = phba->nvmeio_trc_output_idx; - len += snprintf(buf + len, size - len, + len += scnprintf(buf + len, size - len, "%s IO Trace %s: next_idx %d skip %d size %d\n", (phba->nvmet_support ? "NVME" : "NVMET"), (state ? "Enabled" : "Disabled"),
@@ -1226,18 +1226,18 @@ lpfc_debugfs_nvmeio_trc_data(struct lpfc_hba *phba, char *buf, int size)if (!dtp->fmt)continue ; - len +=snprintf (buf + len, size - len, dtp->fmt, + len +=scnprintf (buf + len, size - len, dtp->fmt, dtp->data1, dtp->data2, dtp->data3);if (phba->nvmeio_trc_output_idx >= phba->nvmeio_trc_size) { phba->nvmeio_trc_output_idx =0 ; - len +=snprintf (buf + len, size - len, + len +=scnprintf (buf + len, size - len,"Trace Complete\n" ); goto out; }if (len >= (size -LPFC_DEBUG_OUT_LINE_SZ )) { - len +=snprintf (buf + len, size - len, + len +=scnprintf (buf + len, size - len,"Trace Continue (%d of %d)\n" , phba->nvmeio_trc_output_idx, phba->nvmeio_trc_size);
@@ -1255,18 +1255,18 @@ lpfc_debugfs_nvmeio_trc_data(struct lpfc_hba *phba, char *buf, int size)if (!dtp->fmt)continue ; - len +=snprintf (buf + len, size - len, dtp->fmt, + len +=scnprintf (buf + len, size - len, dtp->fmt, dtp->data1, dtp->data2, dtp->data3);if (phba->nvmeio_trc_output_idx >= phba->nvmeio_trc_size) { phba->nvmeio_trc_output_idx =0 ; - len +=snprintf (buf + len, size - len, + len +=scnprintf (buf + len, size - len,"Trace Complete\n" ); goto out; }if (len >= (size -LPFC_DEBUG_OUT_LINE_SZ )) { - len +=snprintf (buf + len, size - len, + len +=scnprintf (buf + len, size - len,"Trace Continue (%d of %d)\n" , phba->nvmeio_trc_output_idx, phba->nvmeio_trc_size);
@@ -1274,7 +1274,7 @@ lpfc_debugfs_nvmeio_trc_data(struct lpfc_hba *phba, char *buf, int size) } } - len +=snprintf (buf + len, size - len, + len +=scnprintf (buf + len, size - len,"Trace Done\n" ); out:return len;
@@ -1306,39 +1306,39 @@ lpfc_debugfs_cpucheck_data(struct lpfc_vport *vport, char *buf, int size)if (phba->nvmet_support ==0 ) {/* NVME Initiator */ - len +=snprintf (buf + len,PAGE_SIZE - len, + len +=scnprintf (buf + len,PAGE_SIZE - len,"CPUcheck %s\n" , (phba->cpucheck_on &LPFC_CHECK_NVME_IO ?"Enabled" :"Disabled" ));for (i =0 ; i < phba->sli4_hba.num_present_cpu; i++) {if (i >=LPFC_CHECK_CPU_CNT )break ; - len +=snprintf (buf + len,PAGE_SIZE - len, + len +=scnprintf (buf + len,PAGE_SIZE - len,"%02d: xmit x%08x cmpl x%08x\n" , i, phba->cpucheck_xmt_io[i], phba->cpucheck_cmpl_io[i]); tot_xmt += phba->cpucheck_xmt_io[i]; tot_cmpl += phba->cpucheck_cmpl_io[i]; } - len +=snprintf (buf + len,PAGE_SIZE - len, + len +=scnprintf (buf + len,PAGE_SIZE - len,"tot:xmit x%08x cmpl x%08x\n" , tot_xmt, tot_cmpl);return len; }/* NVME Target */ - len +=snprintf (buf + len,PAGE_SIZE - len, + len +=scnprintf (buf + len,PAGE_SIZE - len,"CPUcheck %s " , (phba->cpucheck_on &LPFC_CHECK_NVMET_IO ?"IO Enabled - " :"IO Disabled - " )); - len +=snprintf (buf + len,PAGE_SIZE - len, + len +=scnprintf (buf + len,PAGE_SIZE - len,"%s\n" , (phba->cpucheck_on &LPFC_CHECK_NVMET_RCV ?"Rcv Enabled\n" :"Rcv Disabled\n" ));for (i =0 ; i < phba->sli4_hba.num_present_cpu; i++) {if (i >=LPFC_CHECK_CPU_CNT )break ; - len += snprintf(buf + len, PAGE_SIZE - len, + len += scnprintf(buf + len, PAGE_SIZE - len, "%02d: xmit x%08x ccmpl x%08x " "cmpl x%08x rcv x%08x\n", i, phba->cpucheck_xmt_io[i],
@@ -1350,7 +1350,7 @@ lpfc_debugfs_cpucheck_data(struct lpfc_vport *vport, char *buf, int size) tot_cmpl += phba->cpucheck_cmpl_io[i]; tot_ccmpl += phba->cpucheck_ccmpl_io[i]; } - len +=snprintf (buf + len,PAGE_SIZE - len, + len +=scnprintf (buf + len,PAGE_SIZE - len,"tot:xmit x%08x ccmpl x%08x cmpl x%08x rcv x%08x\n" , tot_xmt, tot_ccmpl, tot_cmpl, tot_rcv);return len;
@@ -1795,28 +1795,28 @@ lpfc_debugfs_dif_err_read(struct file *file, char __user *buf,int cnt =0 ;if (dent == phba->debug_writeGuard) - cnt =snprintf (cbuf,32 ,"%u\n" , phba->lpfc_injerr_wgrd_cnt); + cnt =scnprintf (cbuf,32 ,"%u\n" , phba->lpfc_injerr_wgrd_cnt);else if (dent == phba->debug_writeApp) - cnt =snprintf (cbuf,32 ,"%u\n" , phba->lpfc_injerr_wapp_cnt); + cnt =scnprintf (cbuf,32 ,"%u\n" , phba->lpfc_injerr_wapp_cnt);else if (dent == phba->debug_writeRef) - cnt =snprintf (cbuf,32 ,"%u\n" , phba->lpfc_injerr_wref_cnt); + cnt =scnprintf (cbuf,32 ,"%u\n" , phba->lpfc_injerr_wref_cnt);else if (dent == phba->debug_readGuard) - cnt =snprintf (cbuf,32 ,"%u\n" , phba->lpfc_injerr_rgrd_cnt); + cnt =scnprintf (cbuf,32 ,"%u\n" , phba->lpfc_injerr_rgrd_cnt);else if (dent == phba->debug_readApp) - cnt =snprintf (cbuf,32 ,"%u\n" , phba->lpfc_injerr_rapp_cnt); + cnt =scnprintf (cbuf,32 ,"%u\n" , phba->lpfc_injerr_rapp_cnt);else if (dent == phba->debug_readRef) - cnt =snprintf (cbuf,32 ,"%u\n" , phba->lpfc_injerr_rref_cnt); + cnt =scnprintf (cbuf,32 ,"%u\n" , phba->lpfc_injerr_rref_cnt);else if (dent == phba->debug_InjErrNPortID) - cnt =snprintf (cbuf,32 ,"0x%06x\n" , phba->lpfc_injerr_nportid); + cnt =scnprintf (cbuf,32 ,"0x%06x\n" , phba->lpfc_injerr_nportid);else if (dent == phba->debug_InjErrWWPN) {memcpy (&tmp, &phba->lpfc_injerr_wwpn,sizeof (struct lpfc_name )); tmp =cpu_to_be64 (tmp); - cnt =snprintf (cbuf,32 ,"0x%016llx\n" , tmp); + cnt =scnprintf (cbuf,32 ,"0x%016llx\n" , tmp); }else if (dent == phba->debug_InjErrLBA) {if (phba->lpfc_injerr_lba == (sector_t)(-1 )) - cnt =snprintf (cbuf,32 ,"off\n" ); + cnt =scnprintf (cbuf,32 ,"off\n" );else - cnt =snprintf (cbuf,32 ,"0x%llx\n" , + cnt =scnprintf (cbuf,32 ,"0x%llx\n" , (uint64_t ) phba->lpfc_injerr_lba); }else lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
@@ -2622,17 +2622,17 @@ lpfc_idiag_pcicfg_read(struct file *file, char __user *buf, size_t nbytes,switch (count) {case SIZE_U8 :/* byte (8 bits) */ pci_read_config_byte (pdev, where, &u8val); - len +=snprintf (pbuffer+len,LPFC_PCI_CFG_SIZE -len, + len +=scnprintf (pbuffer+len,LPFC_PCI_CFG_SIZE -len,"%03x: %02x\n" , where, u8val);break ;case SIZE_U16 :/* word (16 bits) */ pci_read_config_word (pdev, where, &u16val); - len +=snprintf (pbuffer+len,LPFC_PCI_CFG_SIZE -len, + len +=scnprintf (pbuffer+len,LPFC_PCI_CFG_SIZE -len,"%03x: %04x\n" , where, u16val);break ;case SIZE_U32 :/* double word (32 bits) */ pci_read_config_dword (pdev, where, &u32val); - len +=snprintf (pbuffer+len,LPFC_PCI_CFG_SIZE -len, + len +=scnprintf (pbuffer+len,LPFC_PCI_CFG_SIZE -len,"%03x: %08x\n" , where, u32val);break ;case LPFC_PCI_CFG_BROWSE :/* browse all */
@@ -2652,25 +2652,25 @@ lpfc_idiag_pcicfg_read(struct file *file, char __user *buf, size_t nbytes, offset = offset_label;/* Read PCI config space */ - len +=snprintf (pbuffer+len,LPFC_PCI_CFG_SIZE -len, + len +=scnprintf (pbuffer+len,LPFC_PCI_CFG_SIZE -len,"%03x: " , offset_label);while (index >0 ) {pci_read_config_dword (pdev, offset, &u32val); - len +=snprintf (pbuffer+len,LPFC_PCI_CFG_SIZE -len, + len +=scnprintf (pbuffer+len,LPFC_PCI_CFG_SIZE -len,"%08x " , u32val); offset +=sizeof (uint32_t );if (offset >=LPFC_PCI_CFG_SIZE ) { - len +=snprintf (pbuffer+len, + len +=scnprintf (pbuffer+len,LPFC_PCI_CFG_SIZE -len,"\n" );break ; } index -=sizeof (uint32_t );if (!index) - len +=snprintf (pbuffer+len,LPFC_PCI_CFG_SIZE -len, + len +=scnprintf (pbuffer+len,LPFC_PCI_CFG_SIZE -len,"\n" );else if (!(index % (8 *sizeof (uint32_t )))) { offset_label += (8 *sizeof (uint32_t )); - len +=snprintf (pbuffer+len,LPFC_PCI_CFG_SIZE -len, + len +=scnprintf (pbuffer+len,LPFC_PCI_CFG_SIZE -len,"\n%03x: " , offset_label); } }
@@ -2941,7 +2941,7 @@ lpfc_idiag_baracc_read(struct file *file, char __user *buf, size_t nbytes,if (acc_range ==SINGLE_WORD ) { offset_run = offset; u32val =readl (mem_mapped_bar + offset_run); - len +=snprintf (pbuffer+len,LPFC_PCI_BAR_RD_BUF_SIZE -len, + len +=scnprintf (pbuffer+len,LPFC_PCI_BAR_RD_BUF_SIZE -len,"%05x: %08x\n" , offset_run, u32val); }else goto baracc_browse;
@@ -2955,35 +2955,35 @@ lpfc_idiag_baracc_read(struct file *file, char __user *buf, size_t nbytes, offset_run = offset_label;/* Read PCI bar memory mapped space */ - len +=snprintf (pbuffer+len,LPFC_PCI_BAR_RD_BUF_SIZE -len, + len +=scnprintf (pbuffer+len,LPFC_PCI_BAR_RD_BUF_SIZE -len,"%05x: " , offset_label); index =LPFC_PCI_BAR_RD_SIZE ;while (index >0 ) { u32val =readl (mem_mapped_bar + offset_run); - len +=snprintf (pbuffer+len,LPFC_PCI_BAR_RD_BUF_SIZE -len, + len +=scnprintf (pbuffer+len,LPFC_PCI_BAR_RD_BUF_SIZE -len,"%08x " , u32val); offset_run +=sizeof (uint32_t );if (acc_range ==LPFC_PCI_BAR_BROWSE ) {if (offset_run >= bar_size) { - len +=snprintf (pbuffer+len, + len +=scnprintf (pbuffer+len,LPFC_PCI_BAR_RD_BUF_SIZE -len,"\n" );break ; } }else {if (offset_run >= offset + (acc_range *sizeof (uint32_t ))) { - len +=snprintf (pbuffer+len, + len +=scnprintf (pbuffer+len,LPFC_PCI_BAR_RD_BUF_SIZE -len,"\n" );break ; } } index -=sizeof (uint32_t );if (!index) - len +=snprintf (pbuffer+len, + len +=scnprintf (pbuffer+len,LPFC_PCI_BAR_RD_BUF_SIZE -len,"\n" );else if (!(index % (8 *sizeof (uint32_t )))) { offset_label += (8 *sizeof (uint32_t )); - len +=snprintf (pbuffer+len, + len +=scnprintf (pbuffer+len,LPFC_PCI_BAR_RD_BUF_SIZE -len,"\n%05x: " , offset_label); }
@@ -3156,19 +3156,19 @@ __lpfc_idiag_print_wq(struct lpfc_queue *qp, char *wqtype,if (!qp)return len; - len +=snprintf (pbuffer + len,LPFC_QUE_INFO_GET_BUF_SIZE - len, + len +=scnprintf (pbuffer + len,LPFC_QUE_INFO_GET_BUF_SIZE - len,"\t\t%s WQ info: " , wqtype); - len +=snprintf (pbuffer + len,LPFC_QUE_INFO_GET_BUF_SIZE - len, + len +=scnprintf (pbuffer + len,LPFC_QUE_INFO_GET_BUF_SIZE - len,"AssocCQID[%04d]: WQ-STAT[oflow:x%x posted:x%llx]\n" , qp->assoc_qid, qp->q_cnt_1, (unsigned long long )qp->q_cnt_4); - len +=snprintf (pbuffer + len,LPFC_QUE_INFO_GET_BUF_SIZE - len, + len +=scnprintf (pbuffer + len,LPFC_QUE_INFO_GET_BUF_SIZE - len,"\t\tWQID[%02d], QE-CNT[%04d], QE-SZ[%04d], " "HST-IDX[%04d], PRT-IDX[%04d], PST[%03d]" , qp->queue_id, qp->entry_count, qp->entry_size, qp->host_index, qp->hba_index, qp->entry_repost); - len +=snprintf (pbuffer + len, + len +=scnprintf (pbuffer + len,LPFC_QUE_INFO_GET_BUF_SIZE - len,"\n" );return len; }
@@ -3206,21 +3206,21 @@ __lpfc_idiag_print_cq(struct lpfc_queue *qp, char *cqtype,if (!qp)return len; - len +=snprintf (pbuffer + len,LPFC_QUE_INFO_GET_BUF_SIZE - len, + len +=scnprintf (pbuffer + len,LPFC_QUE_INFO_GET_BUF_SIZE - len,"\t%s CQ info: " , cqtype); - len +=snprintf (pbuffer + len,LPFC_QUE_INFO_GET_BUF_SIZE - len, + len +=scnprintf (pbuffer + len,LPFC_QUE_INFO_GET_BUF_SIZE - len,"AssocEQID[%02d]: CQ STAT[max:x%x relw:x%x " "xabt:x%x wq:x%llx]\n" , qp->assoc_qid, qp->q_cnt_1, qp->q_cnt_2, qp->q_cnt_3, (unsigned long long )qp->q_cnt_4); - len +=snprintf (pbuffer + len,LPFC_QUE_INFO_GET_BUF_SIZE - len, + len +=scnprintf (pbuffer + len,LPFC_QUE_INFO_GET_BUF_SIZE - len,"\tCQID[%02d], QE-CNT[%04d], QE-SZ[%04d], " "HST-IDX[%04d], PRT-IDX[%04d], PST[%03d]" , qp->queue_id, qp->entry_count, qp->entry_size, qp->host_index, qp->hba_index, qp->entry_repost); - len +=snprintf (pbuffer + len,LPFC_QUE_INFO_GET_BUF_SIZE - len,"\n" ); + len +=scnprintf (pbuffer + len,LPFC_QUE_INFO_GET_BUF_SIZE - len,"\n" );return len; }
@@ -3232,19 +3232,19 @@ __lpfc_idiag_print_rqpair(struct lpfc_queue *qp, struct lpfc_queue *datqp,if (!qp || !datqp)return len; - len +=snprintf (pbuffer + len,LPFC_QUE_INFO_GET_BUF_SIZE - len, + len +=scnprintf (pbuffer + len,LPFC_QUE_INFO_GET_BUF_SIZE - len,"\t\t%s RQ info: " , rqtype); - len +=snprintf (pbuffer + len,LPFC_QUE_INFO_GET_BUF_SIZE - len, + len +=scnprintf (pbuffer + len,LPFC_QUE_INFO_GET_BUF_SIZE - len,"AssocCQID[%02d]: RQ-STAT[nopost:x%x nobuf:x%x " "posted:x%x rcv:x%llx]\n" , qp->assoc_qid, qp->q_cnt_1, qp->q_cnt_2, qp->q_cnt_3, (unsigned long long )qp->q_cnt_4); - len +=snprintf (pbuffer + len,LPFC_QUE_INFO_GET_BUF_SIZE - len, + len +=scnprintf (pbuffer + len,LPFC_QUE_INFO_GET_BUF_SIZE - len,"\t\tHQID[%02d], QE-CNT[%04d], QE-SZ[%04d], " "HST-IDX[%04d], PRT-IDX[%04d], PST[%03d]\n" , qp->queue_id, qp->entry_count, qp->entry_size, qp->host_index, qp->hba_index, qp->entry_repost); - len += snprintf(pbuffer + len, LPFC_QUE_INFO_GET_BUF_SIZE - len, + len += scnprintf(pbuffer + len, LPFC_QUE_INFO_GET_BUF_SIZE - len, "\t\tDQID[%02d], QE-CNT[%04d], QE-SZ[%04d], " "HST-IDX[%04d], PRT-IDX[%04d], PST[%03d]\n", datqp->queue_id, datqp->entry_count,
@@ -3329,17 +3329,17 @@ __lpfc_idiag_print_eq(struct lpfc_queue *qp, char *eqtype,if (!qp)return len; - len +=snprintf (pbuffer + len,LPFC_QUE_INFO_GET_BUF_SIZE - len, + len +=scnprintf (pbuffer + len,LPFC_QUE_INFO_GET_BUF_SIZE - len,"\n%s EQ info: EQ-STAT[max:x%x noE:x%x " "cqe_proc:x%x eqe_proc:x%llx eqd %d]\n" , eqtype, qp->q_cnt_1, qp->q_cnt_2, qp->q_cnt_3, (unsigned long long )qp->q_cnt_4, qp->q_mode); - len +=snprintf (pbuffer + len,LPFC_QUE_INFO_GET_BUF_SIZE - len, + len +=scnprintf (pbuffer + len,LPFC_QUE_INFO_GET_BUF_SIZE - len,"EQID[%02d], QE-CNT[%04d], QE-SZ[%04d], " "HST-IDX[%04d], PRT-IDX[%04d], PST[%03d]" , qp->queue_id, qp->entry_count, qp->entry_size, qp->host_index, qp->hba_index, qp->entry_repost); - len +=snprintf (pbuffer + len,LPFC_QUE_INFO_GET_BUF_SIZE - len,"\n" ); + len +=scnprintf (pbuffer + len,LPFC_QUE_INFO_GET_BUF_SIZE - len,"\n" );return len; }
@@ -3397,7 +3397,7 @@ lpfc_idiag_queinfo_read(struct file *file, char __user *buf, size_t nbytes,if (phba->cfg_fof ==0 ) phba->lpfc_idiag_last_eq =0 ; - len +=snprintf (pbuffer + len,LPFC_QUE_INFO_GET_BUF_SIZE - len, + len +=scnprintf (pbuffer + len,LPFC_QUE_INFO_GET_BUF_SIZE - len,"EQ %d out of %d HBA EQs\n" , x, phba->io_channel_irqs);
@@ -3510,7 +3510,7 @@ lpfc_idiag_queinfo_read(struct file *file, char __user *buf, size_t nbytes,return simple_read_from_buffer (buf, nbytes, ppos, pbuffer, len); too_big: - len +=snprintf (pbuffer + len, + len +=scnprintf (pbuffer + len,LPFC_QUE_INFO_GET_BUF_SIZE - len,"Truncated ...\n" ); out:spin_unlock_irq (&phba->hbalock);
@@ -3566,22 +3566,22 @@ lpfc_idiag_queacc_read_qe(char *pbuffer, int len, struct lpfc_queue *pque,return 0 ; esize = pque->entry_size; - len +=snprintf (pbuffer+len,LPFC_QUE_ACC_BUF_SIZE -len, + len +=scnprintf (pbuffer+len,LPFC_QUE_ACC_BUF_SIZE -len,"QE-INDEX[%04d]:\n" , index); offset =0 ; pentry = pque->qe[index].address;while (esize >0 ) { - len +=snprintf (pbuffer+len,LPFC_QUE_ACC_BUF_SIZE -len, + len +=scnprintf (pbuffer+len,LPFC_QUE_ACC_BUF_SIZE -len,"%08x " , *pentry); pentry++; offset +=sizeof (uint32_t ); esize -=sizeof (uint32_t );if (esize >0 && !(offset % (4 *sizeof (uint32_t )))) - len +=snprintf (pbuffer+len, + len +=scnprintf (pbuffer+len,LPFC_QUE_ACC_BUF_SIZE -len,"\n" ); } - len +=snprintf (pbuffer+len,LPFC_QUE_ACC_BUF_SIZE -len,"\n" ); + len +=scnprintf (pbuffer+len,LPFC_QUE_ACC_BUF_SIZE -len,"\n" );return len; }
@@ -3987,27 +3987,27 @@ lpfc_idiag_drbacc_read_reg(struct lpfc_hba *phba, char *pbuffer,switch (drbregid) {case LPFC_DRB_EQ : - len +=snprintf (pbuffer + len,LPFC_DRB_ACC_BUF_SIZE -len, + len +=scnprintf (pbuffer + len,LPFC_DRB_ACC_BUF_SIZE -len,"EQ-DRB-REG: 0x%08x\n" ,readl (phba->sli4_hba.EQDBregaddr));break ;case LPFC_DRB_CQ : - len +=snprintf (pbuffer + len,LPFC_DRB_ACC_BUF_SIZE - len, + len +=scnprintf (pbuffer + len,LPFC_DRB_ACC_BUF_SIZE - len,"CQ-DRB-REG: 0x%08x\n" ,readl (phba->sli4_hba.CQDBregaddr));break ;case LPFC_DRB_MQ : - len +=snprintf (pbuffer+len,LPFC_DRB_ACC_BUF_SIZE -len, + len +=scnprintf (pbuffer+len,LPFC_DRB_ACC_BUF_SIZE -len,"MQ-DRB-REG: 0x%08x\n" ,readl (phba->sli4_hba.MQDBregaddr));break ;case LPFC_DRB_WQ : - len +=snprintf (pbuffer+len,LPFC_DRB_ACC_BUF_SIZE -len, + len +=scnprintf (pbuffer+len,LPFC_DRB_ACC_BUF_SIZE -len,"WQ-DRB-REG: 0x%08x\n" ,readl (phba->sli4_hba.WQDBregaddr));break ;case LPFC_DRB_RQ : - len +=snprintf (pbuffer+len,LPFC_DRB_ACC_BUF_SIZE -len, + len +=scnprintf (pbuffer+len,LPFC_DRB_ACC_BUF_SIZE -len,"RQ-DRB-REG: 0x%08x\n" ,readl (phba->sli4_hba.RQDBregaddr));break ;
@@ -4197,37 +4197,37 @@ lpfc_idiag_ctlacc_read_reg(struct lpfc_hba *phba, char *pbuffer,switch (ctlregid) {case LPFC_CTL_PORT_SEM : - len +=snprintf (pbuffer+len,LPFC_CTL_ACC_BUF_SIZE -len, + len +=scnprintf (pbuffer+len,LPFC_CTL_ACC_BUF_SIZE -len,"Port SemReg: 0x%08x\n" ,readl (phba->sli4_hba.conf_regs_memmap_p +LPFC_CTL_PORT_SEM_OFFSET ));break ;case LPFC_CTL_PORT_STA : - len +=snprintf (pbuffer+len,LPFC_CTL_ACC_BUF_SIZE -len, + len +=scnprintf (pbuffer+len,LPFC_CTL_ACC_BUF_SIZE -len,"Port StaReg: 0x%08x\n" ,readl (phba->sli4_hba.conf_regs_memmap_p +LPFC_CTL_PORT_STA_OFFSET ));break ;case LPFC_CTL_PORT_CTL : - len +=snprintf (pbuffer+len,LPFC_CTL_ACC_BUF_SIZE -len, + len +=scnprintf (pbuffer+len,LPFC_CTL_ACC_BUF_SIZE -len,"Port CtlReg: 0x%08x\n" ,readl (phba->sli4_hba.conf_regs_memmap_p +LPFC_CTL_PORT_CTL_OFFSET ));break ;case LPFC_CTL_PORT_ER1 : - len +=snprintf (pbuffer+len,LPFC_CTL_ACC_BUF_SIZE -len, + len +=scnprintf (pbuffer+len,LPFC_CTL_ACC_BUF_SIZE -len,"Port Er1Reg: 0x%08x\n" ,readl (phba->sli4_hba.conf_regs_memmap_p +LPFC_CTL_PORT_ER1_OFFSET ));break ;case LPFC_CTL_PORT_ER2 : - len +=snprintf (pbuffer+len,LPFC_CTL_ACC_BUF_SIZE -len, + len +=scnprintf (pbuffer+len,LPFC_CTL_ACC_BUF_SIZE -len,"Port Er2Reg: 0x%08x\n" ,readl (phba->sli4_hba.conf_regs_memmap_p +LPFC_CTL_PORT_ER2_OFFSET ));break ;case LPFC_CTL_PDEV_CTL : - len +=snprintf (pbuffer+len,LPFC_CTL_ACC_BUF_SIZE -len, + len +=scnprintf (pbuffer+len,LPFC_CTL_ACC_BUF_SIZE -len,"PDev CtlReg: 0x%08x\n" ,readl (phba->sli4_hba.conf_regs_memmap_p +LPFC_CTL_PDEV_CTL_OFFSET ));
@@ -4420,13 +4420,13 @@ lpfc_idiag_mbxacc_get_setup(struct lpfc_hba *phba, char *pbuffer) mbx_dump_cnt = idiag.cmd.data[IDIAG_MBXACC_DPCNT_INDX ]; mbx_word_cnt = idiag.cmd.data[IDIAG_MBXACC_WDCNT_INDX ]; - len +=snprintf (pbuffer+len,LPFC_MBX_ACC_BUF_SIZE -len, + len +=scnprintf (pbuffer+len,LPFC_MBX_ACC_BUF_SIZE -len,"mbx_dump_map: 0x%08x\n" , mbx_dump_map); - len +=snprintf (pbuffer+len,LPFC_MBX_ACC_BUF_SIZE -len, + len +=scnprintf (pbuffer+len,LPFC_MBX_ACC_BUF_SIZE -len,"mbx_dump_cnt: %04d\n" , mbx_dump_cnt); - len +=snprintf (pbuffer+len,LPFC_MBX_ACC_BUF_SIZE -len, + len +=scnprintf (pbuffer+len,LPFC_MBX_ACC_BUF_SIZE -len,"mbx_word_cnt: %04d\n" , mbx_word_cnt); - len +=snprintf (pbuffer+len,LPFC_MBX_ACC_BUF_SIZE -len, + len +=scnprintf (pbuffer+len,LPFC_MBX_ACC_BUF_SIZE -len,"mbx_mbox_cmd: 0x%02x\n" , mbx_mbox_cmd);return len;
@@ -4575,35 +4575,35 @@ lpfc_idiag_extacc_avail_get(struct lpfc_hba *phba, char *pbuffer, int len) {uint16_t ext_cnt, ext_size; - len +=snprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len, + len +=scnprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len,"\nAvailable Extents Information:\n" ); - len +=snprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len, + len +=scnprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len,"\tPort Available VPI extents: " );lpfc_sli4_get_avail_extnt_rsrc (phba,LPFC_RSC_TYPE_FCOE_VPI , &ext_cnt, &ext_size); - len +=snprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len, + len +=scnprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len,"Count %3d, Size %3d\n" , ext_cnt, ext_size); - len +=snprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len, + len +=scnprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len,"\tPort Available VFI extents: " );lpfc_sli4_get_avail_extnt_rsrc (phba,LPFC_RSC_TYPE_FCOE_VFI , &ext_cnt, &ext_size); - len +=snprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len, + len +=scnprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len,"Count %3d, Size %3d\n" , ext_cnt, ext_size); - len +=snprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len, + len +=scnprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len,"\tPort Available RPI extents: " );lpfc_sli4_get_avail_extnt_rsrc (phba,LPFC_RSC_TYPE_FCOE_RPI , &ext_cnt, &ext_size); - len +=snprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len, + len +=scnprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len,"Count %3d, Size %3d\n" , ext_cnt, ext_size); - len +=snprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len, + len +=scnprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len,"\tPort Available XRI extents: " );lpfc_sli4_get_avail_extnt_rsrc (phba,LPFC_RSC_TYPE_FCOE_XRI , &ext_cnt, &ext_size); - len +=snprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len, + len +=scnprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len,"Count %3d, Size %3d\n" , ext_cnt, ext_size);return len;
@@ -4627,55 +4627,55 @@ lpfc_idiag_extacc_alloc_get(struct lpfc_hba *phba, char *pbuffer, int len)uint16_t ext_cnt, ext_size;int rc; - len +=snprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len, + len +=scnprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len,"\nAllocated Extents Information:\n" ); - len +=snprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len, + len +=scnprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len,"\tHost Allocated VPI extents: " ); rc =lpfc_sli4_get_allocated_extnts (phba,LPFC_RSC_TYPE_FCOE_VPI , &ext_cnt, &ext_size);if (!rc) - len +=snprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len, + len +=scnprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len,"Port %d Extent %3d, Size %3d\n" , phba->brd_no, ext_cnt, ext_size);else - len +=snprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len, + len +=scnprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len,"N/A\n" ); - len +=snprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len, + len +=scnprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len,"\tHost Allocated VFI extents: " ); rc =lpfc_sli4_get_allocated_extnts (phba,LPFC_RSC_TYPE_FCOE_VFI , &ext_cnt, &ext_size);if (!rc) - len +=snprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len, + len +=scnprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len,"Port %d Extent %3d, Size %3d\n" , phba->brd_no, ext_cnt, ext_size);else - len +=snprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len, + len +=scnprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len,"N/A\n" ); - len +=snprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len, + len +=scnprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len,"\tHost Allocated RPI extents: " ); rc =lpfc_sli4_get_allocated_extnts (phba,LPFC_RSC_TYPE_FCOE_RPI , &ext_cnt, &ext_size);if (!rc) - len +=snprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len, + len +=scnprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len,"Port %d Extent %3d, Size %3d\n" , phba->brd_no, ext_cnt, ext_size);else - len +=snprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len, + len +=scnprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len,"N/A\n" ); - len +=snprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len, + len +=scnprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len,"\tHost Allocated XRI extents: " ); rc =lpfc_sli4_get_allocated_extnts (phba,LPFC_RSC_TYPE_FCOE_XRI , &ext_cnt, &ext_size);if (!rc) - len +=snprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len, + len +=scnprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len,"Port %d Extent %3d, Size %3d\n" , phba->brd_no, ext_cnt, ext_size);else - len +=snprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len, + len +=scnprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len,"N/A\n" );return len;
@@ -4699,49 +4699,49 @@ lpfc_idiag_extacc_drivr_get(struct lpfc_hba *phba, char *pbuffer, int len)struct lpfc_rsrc_blks *rsrc_blks;int index; - len +=snprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len, + len +=scnprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len,"\nDriver Extents Information:\n" ); - len +=snprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len, + len +=scnprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len,"\tVPI extents:\n" ); index =0 ;list_for_each_entry (rsrc_blks, &phba->lpfc_vpi_blk_list, list) { - len +=snprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len, + len +=scnprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len,"\t\tBlock %3d: Start %4d, Count %4d\n" , index, rsrc_blks->rsrc_start, rsrc_blks->rsrc_size); index++; } - len +=snprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len, + len +=scnprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len,"\tVFI extents:\n" ); index =0 ;list_for_each_entry (rsrc_blks, &phba->sli4_hba.lpfc_vfi_blk_list, list) { - len +=snprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len, + len +=scnprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len,"\t\tBlock %3d: Start %4d, Count %4d\n" , index, rsrc_blks->rsrc_start, rsrc_blks->rsrc_size); index++; } - len +=snprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len, + len +=scnprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len,"\tRPI extents:\n" ); index =0 ;list_for_each_entry (rsrc_blks, &phba->sli4_hba.lpfc_rpi_blk_list, list) { - len +=snprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len, + len +=scnprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len,"\t\tBlock %3d: Start %4d, Count %4d\n" , index, rsrc_blks->rsrc_start, rsrc_blks->rsrc_size); index++; } - len +=snprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len, + len +=scnprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len,"\tXRI extents:\n" ); index =0 ;list_for_each_entry (rsrc_blks, &phba->sli4_hba.lpfc_xri_blk_list, list) { - len +=snprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len, + len +=scnprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len,"\t\tBlock %3d: Start %4d, Count %4d\n" , index, rsrc_blks->rsrc_start, rsrc_blks->rsrc_size);
@@ -5135,11 +5135,11 @@ lpfc_idiag_mbxacc_dump_bsg_mbox(struct lpfc_hba *phba, enum nemb_type nemb_tp,if (i !=0 )pr_err ("%s\n" , line_buf); len =0 ; - len +=snprintf (line_buf+len, + len +=scnprintf (line_buf+len,LPFC_MBX_ACC_LBUF_SZ -len,"%03d: " , i); } - len +=snprintf (line_buf+len,LPFC_MBX_ACC_LBUF_SZ -len, + len +=scnprintf (line_buf+len,LPFC_MBX_ACC_LBUF_SZ -len,"%08x " , (uint32_t )*pword); pword++; }
@@ -5202,11 +5202,11 @@ lpfc_idiag_mbxacc_dump_issue_mbox(struct lpfc_hba *phba, MAILBOX_t *pmbox)pr_err ("%s\n" , line_buf); len =0 ;memset (line_buf,0 ,LPFC_MBX_ACC_LBUF_SZ ); - len +=snprintf (line_buf+len, + len +=scnprintf (line_buf+len,LPFC_MBX_ACC_LBUF_SZ -len,"%03d: " , i); } - len +=snprintf (line_buf+len,LPFC_MBX_ACC_LBUF_SZ -len, + len +=scnprintf (line_buf+len,LPFC_MBX_ACC_LBUF_SZ -len,"%08x " , ((uint32_t )*pword) &0xffffffff ); pword++;
@@ -5225,18 +5225,18 @@ lpfc_idiag_mbxacc_dump_issue_mbox(struct lpfc_hba *phba, MAILBOX_t *pmbox)pr_err ("%s\n" , line_buf); len =0 ;memset (line_buf,0 ,LPFC_MBX_ACC_LBUF_SZ ); - len +=snprintf (line_buf+len, + len +=scnprintf (line_buf+len,LPFC_MBX_ACC_LBUF_SZ -len,"%03d: " , i); }for (j =0 ; j <4 ; j++) { - len +=snprintf (line_buf+len, + len +=scnprintf (line_buf+len,LPFC_MBX_ACC_LBUF_SZ -len,"%02x" , ((uint8_t )*pbyte) &0xff ); pbyte++; } - len +=snprintf (line_buf+len, + len +=scnprintf (line_buf+len,LPFC_MBX_ACC_LBUF_SZ -len," " ); }if ((i -1 ) %8 )
Signature · 1 line
2.19.2
Re: [PATCH 5/8] scsi: lpfc: change snprintf to scnprintf for possible overflow
Quoted 25 lines · Willy Tarreau
From: Silvio Cesare <[email protected]>
Change snprintf to scnprintf. There are generally two cases where using snprintf causes problems.
1) Uses of size +=
snprintf(buf, SIZE - size, fmt, ...)
In this case, if snprintf would have written more characters than what the buffer size (SIZE) is, then size will end up larger than SIZE. In later uses of snprintf, SIZE - size will result in a negative number, leading to problems. Note that size might already be too large by using size = snprintf before the code reaches a case of size += snprintf.2) If size is ultimately used as a length parameter for a copy back to user space, then it will potentially allow for a buffer overflow and information disclosure when size is greater than SIZE. When the size is used to index the buffer directly, we can have memory corruption. This also means when size = snprintf... is used, it may also cause problems since size may become large. Copying to userspace is mitigated by the
HARDENED_USERCOPYkernel configuration.The solution to these issues is to use scnprintf which returns the number of characters actually written to the buffer, so the size variable will never exceed SIZE.
Quoted 8 lines
Signed-off-by Silvio Cesare <[email protected]>Cc James Smart <[email protected]>Cc Dick Kennedy <[email protected]>Cc Dan Carpenter <[email protected]>Cc Kees Cook <[email protected]>Cc Will Deacon <[email protected]>Cc Greg KH <[email protected]>Signed-off-by Willy Tarreau <[email protected]>
I think this needs Cc: stable.
-Kees
Quoted 1,454 lines
--- drivers/scsi/lpfc/lpfc_debugfs.c | 450 +++++++++++++++---------------- 1 file changed, 225 insertions(+), 225 deletions(-)drivers/scsi/lpfc/lpfc_debugfs.c +225
-226@@ -170,7 +170,7 @@ lpfc_debugfs_disc_trc_data(struct lpfc_vport *vport, char *buf, int size)snprintf (buffer,LPFC_DEBUG_TRC_ENTRY_SIZE ,"%010d:%010d ms:%s\n" , dtp->seq_cnt, ms, dtp->fmt); - len +=snprintf (buf+len, size-len, buffer, + len +=scnprintf (buf+len, size-len, buffer, dtp->data1, dtp->data2, dtp->data3); }for (i =0 ; i < index; i++) {@@ -181,7 +181,7 @@ lpfc_debugfs_disc_trc_data(struct lpfc_vport *vport, char *buf, int size)snprintf (buffer,LPFC_DEBUG_TRC_ENTRY_SIZE ,"%010d:%010d ms:%s\n" , dtp->seq_cnt, ms, dtp->fmt); - len +=snprintf (buf+len, size-len, buffer, + len +=scnprintf (buf+len, size-len, buffer, dtp->data1, dtp->data2, dtp->data3); }@@ -236,7 +236,7 @@ lpfc_debugfs_slow_ring_trc_data(struct lpfc_hba *phba, char *buf, int size)snprintf (buffer,LPFC_DEBUG_TRC_ENTRY_SIZE ,"%010d:%010d ms:%s\n" , dtp->seq_cnt, ms, dtp->fmt); - len +=snprintf (buf+len, size-len, buffer, + len +=scnprintf (buf+len, size-len, buffer, dtp->data1, dtp->data2, dtp->data3); }for (i =0 ; i < index; i++) {@@ -247,7 +247,7 @@ lpfc_debugfs_slow_ring_trc_data(struct lpfc_hba *phba, char *buf, int size)snprintf (buffer,LPFC_DEBUG_TRC_ENTRY_SIZE ,"%010d:%010d ms:%s\n" , dtp->seq_cnt, ms, dtp->fmt); - len +=snprintf (buf+len, size-len, buffer, + len +=scnprintf (buf+len, size-len, buffer, dtp->data1, dtp->data2, dtp->data3); }@@ -307,7 +307,7 @@ lpfc_debugfs_hbqinfo_data(struct lpfc_hba *phba, char *buf, int size) i = lpfc_debugfs_last_hbq; - len +=snprintf (buf+len, size-len,"HBQ %d Info\n" , i); + len +=scnprintf (buf+len, size-len,"HBQ %d Info\n" , i); hbqs = &phba->hbqs[i]; posted =0 ;@@ -315,21 +315,21 @@ lpfc_debugfs_hbqinfo_data(struct lpfc_hba *phba, char *buf, int size) posted++; hip = lpfc_hbq_defs[i]; - len +=snprintf (buf+len, size-len, + len +=scnprintf (buf+len, size-len,"idx:%d prof:%d rn:%d bufcnt:%d icnt:%d acnt:%d posted %d\n" , hip->hbq_index, hip->profile, hip->rn, hip->buffer_count, hip->init_count, hip->add_count, posted); raw_index = phba->hbq_get[i]; getidx =le32_to_cpu (raw_index); - len +=snprintf (buf+len, size-len, + len +=scnprintf (buf+len, size-len,"entries:%d bufcnt:%d Put:%d nPut:%d localGet:%d hbaGet:%d\n" , hbqs->entry_count, hbqs->buffer_count, hbqs->hbqPutIdx, hbqs->next_hbqPutIdx, hbqs->local_hbqGetIdx, getidx); hbqe = (struct lpfc_hbq_entry *) phba->hbqs[i].hbq_virt;for (j=0 ; j<hbqs->entry_count; j++) { - len += snprintf(buf+len, size-len, + len += scnprintf(buf+len, size-len, "%03d: %08x %04x %05x ", j, le32_to_cpu(hbqe->bde.addrLow), le32_to_cpu(hbqe->bde.tus.w),@@ -341,14 +341,14 @@ lpfc_debugfs_hbqinfo_data(struct lpfc_hba *phba, char *buf, int size) low = hbqs->hbqPutIdx - posted;if (low >=0 ) {if ((j >= hbqs->hbqPutIdx) || (j < low)) { - len +=snprintf (buf+len, size-len,"Unused\n" ); + len +=scnprintf (buf+len, size-len,"Unused\n" ); goto skipit; } }else {if ((j >= hbqs->hbqPutIdx) && (j < (hbqs->entry_count+low))) { - len +=snprintf (buf+len, size-len,"Unused\n" ); + len +=scnprintf (buf+len, size-len,"Unused\n" ); goto skipit; } }@@ -358,7 +358,7 @@ lpfc_debugfs_hbqinfo_data(struct lpfc_hba *phba, char *buf, int size) hbq_buf = container_of(d_buf, struct hbq_dmabuf, dbuf); phys = ((uint64_t )hbq_buf->dbuf.phys &0xffffffff );if (phys ==le32_to_cpu (hbqe->bde.addrLow)) { - len +=snprintf (buf+len, size-len, + len +=scnprintf (buf+len, size-len,"Buf%d: %p %06x\n" , i, hbq_buf->dbuf.virt, hbq_buf->tag); found =1 ;@@ -367,7 +367,7 @@ lpfc_debugfs_hbqinfo_data(struct lpfc_hba *phba, char *buf, int size) i++; }if (!found) { - len +=snprintf (buf+len, size-len,"No DMAinfo?\n" ); + len +=scnprintf (buf+len, size-len,"No DMAinfo?\n" ); } skipit: hbqe++;@@ -413,7 +413,7 @@ lpfc_debugfs_dumpHBASlim_data(struct lpfc_hba *phba, char *buf, int size) off =0 ;spin_lock_irq (&phba->hbalock); - len +=snprintf (buf+len, size-len,"HBA SLIM\n" ); + len +=scnprintf (buf+len, size-len,"HBA SLIM\n" );lpfc_memcpy_from_slim (buffer, phba->MBslimaddr + lpfc_debugfs_last_hba_slim_off,1024 );@@ -427,7 +427,7 @@ lpfc_debugfs_dumpHBASlim_data(struct lpfc_hba *phba, char *buf, int size) i =1024 ;while (i >0 ) { - len +=snprintf (buf+len, size-len, + len +=scnprintf (buf+len, size-len,"%08x: %08x %08x %08x %08x %08x %08x %08x %08x\n" , off, *ptr, *(ptr+1 ), *(ptr+2 ), *(ptr+3 ), *(ptr+4 ), *(ptr+5 ), *(ptr+6 ), *(ptr+7 ));@@ -471,11 +471,11 @@ lpfc_debugfs_dumpHostSlim_data(struct lpfc_hba *phba, char *buf, int size) off =0 ;spin_lock_irq (&phba->hbalock); - len +=snprintf (buf+len, size-len,"SLIM Mailbox\n" ); + len +=scnprintf (buf+len, size-len,"SLIM Mailbox\n" ); ptr = (uint32_t *)phba->slim2p.virt; i =sizeof (MAILBOX_t);while (i >0 ) { - len +=snprintf (buf+len, size-len, + len +=scnprintf (buf+len, size-len,"%08x: %08x %08x %08x %08x %08x %08x %08x %08x\n" , off, *ptr, *(ptr+1 ), *(ptr+2 ), *(ptr+3 ), *(ptr+4 ), *(ptr+5 ), *(ptr+6 ), *(ptr+7 ));@@ -484,11 +484,11 @@ lpfc_debugfs_dumpHostSlim_data(struct lpfc_hba *phba, char *buf, int size) off += (8 *sizeof (uint32_t )); } - len +=snprintf (buf+len, size-len,"SLIM PCB\n" ); + len +=scnprintf (buf+len, size-len,"SLIM PCB\n" ); ptr = (uint32_t *)phba->pcb; i =sizeof (PCB_t);while (i >0 ) { - len +=snprintf (buf+len, size-len, + len +=scnprintf (buf+len, size-len,"%08x: %08x %08x %08x %08x %08x %08x %08x %08x\n" , off, *ptr, *(ptr+1 ), *(ptr+2 ), *(ptr+3 ), *(ptr+4 ), *(ptr+5 ), *(ptr+6 ), *(ptr+7 ));@@ -501,7 +501,7 @@ lpfc_debugfs_dumpHostSlim_data(struct lpfc_hba *phba, char *buf, int size)for (i =0 ; i <4 ; i++) { pgpp = &phba->port_gp[i]; pring = &psli->sli3_ring[i]; - len +=snprintf (buf+len, size-len, + len +=scnprintf (buf+len, size-len,"Ring %d: CMD GetInx:%d " "(Max:%d Next:%d " "Local:%d flg:x%x) "@@ -518,7 +518,7 @@ lpfc_debugfs_dumpHostSlim_data(struct lpfc_hba *phba, char *buf, int size) word1 =readl (phba->CAregaddr); word2 =readl (phba->HSregaddr); word3 =readl (phba->HCregaddr); - len +=snprintf (buf+len, size-len,"HA:%08x CA:%08x HS:%08x " + len +=scnprintf (buf+len, size-len,"HA:%08x CA:%08x HS:%08x " "HC:%08x\n" , word0, word1, word2, word3); }spin_unlock_irq (&phba->hbalock);@@ -556,12 +556,12 @@ lpfc_debugfs_nodelist_data(struct lpfc_vport *vport, char *buf, int size) cnt = (LPFC_NODELIST_SIZE /LPFC_NODELIST_ENTRY_SIZE ); outio =0 ; - len +=snprintf (buf+len, size-len,"\nFCP Nodelist Entries ...\n" ); + len +=scnprintf (buf+len, size-len,"\nFCP Nodelist Entries ...\n" );spin_lock_irq (shost->host_lock);list_for_each_entry (ndlp, &vport->fc_nodes, nlp_listp) { iocnt =0 ;if (!cnt) { - len +=snprintf (buf+len, size-len, + len +=scnprintf (buf+len, size-len,"Missing Nodelist Entries\n" );break ; }@@ -599,61 +599,61 @@ lpfc_debugfs_nodelist_data(struct lpfc_vport *vport, char *buf, int size)default : statep ="UNKNOWN" ; } - len +=snprintf (buf+len, size-len,"%s DID:x%06x " , + len +=scnprintf (buf+len, size-len,"%s DID:x%06x " , statep, ndlp->nlp_DID); - len +=snprintf (buf+len, size-len, + len +=scnprintf (buf+len, size-len,"WWPN x%llx " ,wwn_to_u64 (ndlp->nlp_portname.u.wwn)); - len +=snprintf (buf+len, size-len, + len +=scnprintf (buf+len, size-len,"WWNN x%llx " ,wwn_to_u64 (ndlp->nlp_nodename.u.wwn));if (ndlp->nlp_flag &NLP_RPI_REGISTERED ) - len +=snprintf (buf+len, size-len,"RPI:%03d " , + len +=scnprintf (buf+len, size-len,"RPI:%03d " , ndlp->nlp_rpi);else - len +=snprintf (buf+len, size-len,"RPI:none " ); - len +=snprintf (buf+len, size-len,"flag:x%08x " , + len +=scnprintf (buf+len, size-len,"RPI:none " ); + len +=scnprintf (buf+len, size-len,"flag:x%08x " , ndlp->nlp_flag);if (!ndlp->nlp_type) - len +=snprintf (buf+len, size-len,"UNKNOWN_TYPE " ); + len +=scnprintf (buf+len, size-len,"UNKNOWN_TYPE " );if (ndlp->nlp_type &NLP_FC_NODE ) - len +=snprintf (buf+len, size-len,"FC_NODE " ); + len +=scnprintf (buf+len, size-len,"FC_NODE " );if (ndlp->nlp_type &NLP_FABRIC ) { - len +=snprintf (buf+len, size-len,"FABRIC " ); + len +=scnprintf (buf+len, size-len,"FABRIC " ); iocnt =0 ; }if (ndlp->nlp_type &NLP_FCP_TARGET ) - len +=snprintf (buf+len, size-len,"FCP_TGT sid:%d " , + len +=scnprintf (buf+len, size-len,"FCP_TGT sid:%d " , ndlp->nlp_sid);if (ndlp->nlp_type &NLP_FCP_INITIATOR ) - len +=snprintf (buf+len, size-len,"FCP_INITIATOR " ); + len +=scnprintf (buf+len, size-len,"FCP_INITIATOR " );if (ndlp->nlp_type &NLP_NVME_TARGET ) - len +=snprintf (buf + len, + len +=scnprintf (buf + len, size - len,"NVME_TGT sid:%d " ,NLP_NO_SID );if (ndlp->nlp_type &NLP_NVME_INITIATOR ) - len +=snprintf (buf + len, + len +=scnprintf (buf + len, size - len,"NVME_INITIATOR " ); - len +=snprintf (buf+len, size-len,"usgmap:%x " , + len +=scnprintf (buf+len, size-len,"usgmap:%x " , ndlp->nlp_usg_map); - len +=snprintf (buf+len, size-len,"refcnt:%x" , + len +=scnprintf (buf+len, size-len,"refcnt:%x" ,kref_read (&ndlp->kref));if (iocnt) { i =atomic_read (&ndlp->cmd_pending); - len +=snprintf (buf + len, size - len, + len +=scnprintf (buf + len, size - len," OutIO:x%x Qdepth x%x" , i, ndlp->cmd_qdepth); outio += i; } - len +=snprintf (buf+len, size-len,"\n" ); + len +=scnprintf (buf+len, size-len,"\n" ); }spin_unlock_irq (shost->host_lock); - len +=snprintf (buf + len, size - len, + len +=scnprintf (buf + len, size - len,"\nOutstanding IO x%x\n" , outio);if (phba->nvmet_support && phba->targetport && (vport == phba->pport)) { - len +=snprintf (buf + len, size - len, + len +=scnprintf (buf + len, size - len,"\nNVME Targetport Entry ...\n" );/* Port state is only one of two values for now. */ @@ -661,18 +661,18 @@ lpfc_debugfs_nodelist_data(struct lpfc_vport *vport, char *buf, int size) statep ="REGISTERED" ; else statep ="INIT" ; - len +=snprintf (buf + len, size - len, + len +=scnprintf (buf + len, size - len,"TGT WWNN x%llx WWPN x%llx State %s\n" ,wwn_to_u64 (vport->fc_nodename.u.wwn),wwn_to_u64 (vport->fc_portname.u.wwn), statep); - len +=snprintf (buf + len, size - len, + len +=scnprintf (buf + len, size - len," Targetport DID x%06x\n" , phba->targetport->port_id); goto out_exit; } - len +=snprintf (buf + len, size - len, + len +=scnprintf (buf + len, size - len,"\nNVME Lport/Rport Entries ...\n" ); localport = vport->localport;@@ -687,11 +687,11 @@ lpfc_debugfs_nodelist_data(struct lpfc_vport *vport, char *buf, int size)else statep ="UNKNOWN " ; - len +=snprintf (buf + len, size - len, + len +=scnprintf (buf + len, size - len,"Lport DID x%06x PortState %s\n" , localport->port_id, statep); - len +=snprintf (buf + len, size - len,"\tRport List:\n" ); + len +=scnprintf (buf + len, size - len,"\tRport List:\n" );list_for_each_entry (ndlp, &vport->fc_nodes, nlp_listp) {/* local short-hand pointer. */ spin_lock (&phba->hbalock);@@ -718,32 +718,32 @@ lpfc_debugfs_nodelist_data(struct lpfc_vport *vport, char *buf, int size) }/* Tab in to show lport ownership. */ - len +=snprintf (buf + len, size - len, + len +=scnprintf (buf + len, size - len,"\t%s Port ID:x%06x " , statep, nrport->port_id); - len +=snprintf (buf + len, size - len,"WWPN x%llx " , + len +=scnprintf (buf + len, size - len,"WWPN x%llx " , nrport->port_name); - len +=snprintf (buf + len, size - len,"WWNN x%llx " , + len +=scnprintf (buf + len, size - len,"WWNN x%llx " , nrport->node_name);/* An NVME rport can have multiple roles. */ if (nrport->port_role &FC_PORT_ROLE_NVME_INITIATOR ) - len +=snprintf (buf + len, size - len, + len +=scnprintf (buf + len, size - len,"INITIATOR " );if (nrport->port_role &FC_PORT_ROLE_NVME_TARGET ) - len +=snprintf (buf + len, size - len, + len +=scnprintf (buf + len, size - len,"TARGET " );if (nrport->port_role &FC_PORT_ROLE_NVME_DISCOVERY ) - len +=snprintf (buf + len, size - len, + len +=scnprintf (buf + len, size - len,"DISCSRVC " );if (nrport->port_role & ~(FC_PORT_ROLE_NVME_INITIATOR |FC_PORT_ROLE_NVME_TARGET |FC_PORT_ROLE_NVME_DISCOVERY )) - len +=snprintf (buf + len, size - len, + len +=scnprintf (buf + len, size - len,"UNKNOWN ROLE x%x" , nrport->port_role);/* Terminate the string. */ - len +=snprintf (buf + len, size - len,"\n" ); + len +=scnprintf (buf + len, size - len,"\n" ); }spin_unlock_irq (shost->host_lock);@@ -782,35 +782,35 @@ lpfc_debugfs_nvmestat_data(struct lpfc_vport *vport, char *buf, int size)if (!phba->targetport)return len; tgtp = (struct lpfc_nvmet_tgtport *)phba->targetport->private; - len +=snprintf (buf + len, size - len, + len +=scnprintf (buf + len, size - len,"\nNVME Targetport Statistics\n" ); - len +=snprintf (buf + len, size - len, + len +=scnprintf (buf + len, size - len,"LS: Rcv %08x Drop %08x Abort %08x\n" ,atomic_read (&tgtp->rcv_ls_req_in),atomic_read (&tgtp->rcv_ls_req_drop),atomic_read (&tgtp->xmt_ls_abort));if (atomic_read (&tgtp->rcv_ls_req_in) !=atomic_read (&tgtp->rcv_ls_req_out)) { - len +=snprintf (buf + len, size - len, + len +=scnprintf (buf + len, size - len,"Rcv LS: in %08x != out %08x\n" ,atomic_read (&tgtp->rcv_ls_req_in),atomic_read (&tgtp->rcv_ls_req_out)); } - len +=snprintf (buf + len, size - len, + len +=scnprintf (buf + len, size - len,"LS: Xmt %08x Drop %08x Cmpl %08x\n" ,atomic_read (&tgtp->xmt_ls_rsp),atomic_read (&tgtp->xmt_ls_drop),atomic_read (&tgtp->xmt_ls_rsp_cmpl)); - len +=snprintf (buf + len, size - len, + len +=scnprintf (buf + len, size - len,"LS: RSP Abort %08x xb %08x Err %08x\n" ,atomic_read (&tgtp->xmt_ls_rsp_aborted),atomic_read (&tgtp->xmt_ls_rsp_xb_set),atomic_read (&tgtp->xmt_ls_rsp_error)); - len += snprintf(buf + len, size - len, + len += scnprintf(buf + len, size - len, "FCP: Rcv %08x Defer %08x Release %08x " "Drop %08x\n", atomic_read(&tgtp->rcv_fcp_cmd_in),@@ -820,13 +820,13 @@ lpfc_debugfs_nvmestat_data(struct lpfc_vport *vport, char *buf, int size)if (atomic_read (&tgtp->rcv_fcp_cmd_in) !=atomic_read (&tgtp->rcv_fcp_cmd_out)) { - len +=snprintf (buf + len, size - len, + len +=scnprintf (buf + len, size - len,"Rcv FCP: in %08x != out %08x\n" ,atomic_read (&tgtp->rcv_fcp_cmd_in),atomic_read (&tgtp->rcv_fcp_cmd_out)); } - len += snprintf(buf + len, size - len, + len += scnprintf(buf + len, size - len, "FCP Rsp: read %08x readrsp %08x " "write %08x rsp %08x\n", atomic_read(&tgtp->xmt_fcp_read),@@ -834,31 +834,31 @@ lpfc_debugfs_nvmestat_data(struct lpfc_vport *vport, char *buf, int size)atomic_read (&tgtp->xmt_fcp_write), atomic_read(&tgtp->xmt_fcp_rsp)); - len +=snprintf (buf + len, size - len, + len +=scnprintf (buf + len, size - len,"FCP Rsp Cmpl: %08x err %08x drop %08x\n" ,atomic_read (&tgtp->xmt_fcp_rsp_cmpl),atomic_read (&tgtp->xmt_fcp_rsp_error),atomic_read (&tgtp->xmt_fcp_rsp_drop)); - len +=snprintf (buf + len, size - len, + len +=scnprintf (buf + len, size - len,"FCP Rsp Abort: %08x xb %08x xricqe %08x\n" ,atomic_read (&tgtp->xmt_fcp_rsp_aborted),atomic_read (&tgtp->xmt_fcp_rsp_xb_set),atomic_read (&tgtp->xmt_fcp_xri_abort_cqe)); - len +=snprintf (buf + len, size - len, + len +=scnprintf (buf + len, size - len,"ABORT: Xmt %08x Cmpl %08x\n" ,atomic_read (&tgtp->xmt_fcp_abort),atomic_read (&tgtp->xmt_fcp_abort_cmpl)); - len +=snprintf (buf + len, size - len, + len +=scnprintf (buf + len, size - len,"ABORT: Sol %08x Usol %08x Err %08x Cmpl %08x" ,atomic_read (&tgtp->xmt_abort_sol),atomic_read (&tgtp->xmt_abort_unsol),atomic_read (&tgtp->xmt_abort_rsp),atomic_read (&tgtp->xmt_abort_rsp_error)); - len +=snprintf (buf + len, size - len,"\n" ); + len +=scnprintf (buf + len, size - len,"\n" ); cnt =0 ;spin_lock (&phba->sli4_hba.abts_nvme_buf_list_lock);@@ -869,7 +869,7 @@ lpfc_debugfs_nvmestat_data(struct lpfc_vport *vport, char *buf, int size) }spin_unlock (&phba->sli4_hba.abts_nvme_buf_list_lock);if (cnt) { - len +=snprintf (buf + len, size - len, + len +=scnprintf (buf + len, size - len,"ABORT: %d ctx entries\n" , cnt);spin_lock (&phba->sli4_hba.abts_nvme_buf_list_lock); list_for_each_entry_safe(ctxp, next_ctxp,@@ -877,7 +877,7 @@ lpfc_debugfs_nvmestat_data(struct lpfc_vport *vport, char *buf, int size) list) {if (len >= (size -LPFC_DEBUG_OUT_LINE_SZ ))break ; - len += snprintf(buf + len, size - len, + len += scnprintf(buf + len, size - len, "Entry: oxid %x state %x " "flag %x\n", ctxp->oxid, ctxp->state,@@ -891,7 +891,7 @@ lpfc_debugfs_nvmestat_data(struct lpfc_vport *vport, char *buf, int size) tot +=atomic_read (&tgtp->xmt_fcp_release); tot =atomic_read (&tgtp->rcv_fcp_cmd_in) - tot; - len += snprintf(buf + len, size - len, + len += scnprintf(buf + len, size - len, "IO_CTX: %08x WAIT: cur %08x tot %08x\n" "CTX Outstanding %08llx\n", phba->sli4_hba.nvmet_xri_cnt,@@ -909,10 +909,10 @@ lpfc_debugfs_nvmestat_data(struct lpfc_vport *vport, char *buf, int size)if (!lport)return len; - len +=snprintf (buf + len, size - len, + len +=scnprintf (buf + len, size - len,"\nNVME Lport Statistics\n" ); - len +=snprintf (buf + len, size - len, + len +=scnprintf (buf + len, size - len,"LS: Xmt %016x Cmpl %016x\n" ,atomic_read (&lport->fc4NvmeLsRequests),atomic_read (&lport->fc4NvmeLsCmpls));@@ -936,20 +936,20 @@ lpfc_debugfs_nvmestat_data(struct lpfc_vport *vport, char *buf, int size)if (i >=32 )continue ; - len +=snprintf (buf + len,PAGE_SIZE - len, + len +=scnprintf (buf + len,PAGE_SIZE - len,"FCP (%d): Rd %016llx Wr %016llx " "IO %016llx " , i, data1, data2, data3); - len +=snprintf (buf + len,PAGE_SIZE - len, + len +=scnprintf (buf + len,PAGE_SIZE - len,"Cmpl %016llx OutIO %016llx\n" , tot, ((data1 + data2 + data3) - tot)); } - len +=snprintf (buf + len,PAGE_SIZE - len, + len +=scnprintf (buf + len,PAGE_SIZE - len,"Total FCP Cmpl %016llx Issue %016llx " "OutIO %016llx\n" , totin, totout, totout - totin); - len += snprintf(buf + len, size - len, + len += scnprintf(buf + len, size - len, "LS Xmt Err: Abrt %08x Err %08x " "Cmpl Err: xb %08x Err %08x\n", atomic_read(&lport->xmt_ls_abort),@@ -957,7 +957,7 @@ lpfc_debugfs_nvmestat_data(struct lpfc_vport *vport, char *buf, int size)atomic_read (&lport->cmpl_ls_xb), atomic_read(&lport->cmpl_ls_err)); - len += snprintf(buf + len, size - len, + len += scnprintf(buf + len, size - len, "FCP Xmt Err: noxri %06x nondlp %06x " "qdepth %06x wqerr %06x err %06x Abrt %06x\n", atomic_read(&lport->xmt_fcp_noxri),@@ -967,7 +967,7 @@ lpfc_debugfs_nvmestat_data(struct lpfc_vport *vport, char *buf, int size)atomic_read (&lport->xmt_fcp_err), atomic_read(&lport->xmt_fcp_abort)); - len +=snprintf (buf + len, size - len, + len +=scnprintf (buf + len, size - len,"FCP Cmpl Err: xb %08x Err %08x\n" ,atomic_read (&lport->cmpl_fcp_xb),atomic_read (&lport->cmpl_fcp_err));@@ -999,58 +999,58 @@ lpfc_debugfs_nvmektime_data(struct lpfc_vport *vport, char *buf, int size)if (phba->nvmet_support ==0 ) {/* NVME Initiator */ - len +=snprintf (buf + len,PAGE_SIZE - len, + len +=scnprintf (buf + len,PAGE_SIZE - len,"ktime %s: Total Samples: %lld\n" , (phba->ktime_on ?"Enabled" :"Disabled" ), phba->ktime_data_samples);if (phba->ktime_data_samples ==0 )return len; - len +=snprintf ( + len +=scnprintf ( buf + len,PAGE_SIZE - len,"Segment 1: Last NVME Cmd cmpl " "done -to- Start of next NVME cnd (in driver)\n" ); - len +=snprintf ( + len +=scnprintf ( buf + len,PAGE_SIZE - len,"avg:%08lld min:%08lld max %08lld\n" ,div_u64 (phba->ktime_seg1_total, phba->ktime_data_samples), phba->ktime_seg1_min, phba->ktime_seg1_max); - len +=snprintf ( + len +=scnprintf ( buf + len,PAGE_SIZE - len,"Segment 2: Driver start of NVME cmd " "-to- Firmware WQ doorbell\n" ); - len +=snprintf ( + len +=scnprintf ( buf + len,PAGE_SIZE - len,"avg:%08lld min:%08lld max %08lld\n" ,div_u64 (phba->ktime_seg2_total, phba->ktime_data_samples), phba->ktime_seg2_min, phba->ktime_seg2_max); - len +=snprintf ( + len +=scnprintf ( buf + len,PAGE_SIZE - len,"Segment 3: Firmware WQ doorbell -to- " "MSI-X ISR cmpl\n" ); - len +=snprintf ( + len +=scnprintf ( buf + len,PAGE_SIZE - len,"avg:%08lld min:%08lld max %08lld\n" ,div_u64 (phba->ktime_seg3_total, phba->ktime_data_samples), phba->ktime_seg3_min, phba->ktime_seg3_max); - len +=snprintf ( + len +=scnprintf ( buf + len,PAGE_SIZE - len,"Segment 4: MSI-X ISR cmpl -to- " "NVME cmpl done\n" ); - len +=snprintf ( + len +=scnprintf ( buf + len,PAGE_SIZE - len,"avg:%08lld min:%08lld max %08lld\n" ,div_u64 (phba->ktime_seg4_total, phba->ktime_data_samples), phba->ktime_seg4_min, phba->ktime_seg4_max); - len += snprintf( + len += scnprintf( buf + len, PAGE_SIZE - len, "Total IO avg time: %08lld\n", div_u64(phba->ktime_seg1_total +@@ -1062,7 +1062,7 @@ lpfc_debugfs_nvmektime_data(struct lpfc_vport *vport, char *buf, int size) }/* NVME Target */ - len += snprintf(buf + len, PAGE_SIZE-len, + len += scnprintf(buf + len, PAGE_SIZE-len, "ktime %s: Total Samples: %lld %lld\n", (phba->ktime_on ? "Enabled" : "Disabled"), phba->ktime_data_samples,@@ -1070,46 +1070,46 @@ lpfc_debugfs_nvmektime_data(struct lpfc_vport *vport, char *buf, int size)if (phba->ktime_data_samples ==0 )return len; - len +=snprintf (buf + len,PAGE_SIZE -len, + len +=scnprintf (buf + len,PAGE_SIZE -len,"Segment 1: MSI-X ISR Rcv cmd -to- " "cmd pass to NVME Layer\n" ); - len +=snprintf (buf + len,PAGE_SIZE -len, + len +=scnprintf (buf + len,PAGE_SIZE -len,"avg:%08lld min:%08lld max %08lld\n" ,div_u64 (phba->ktime_seg1_total, phba->ktime_data_samples), phba->ktime_seg1_min, phba->ktime_seg1_max); - len +=snprintf (buf + len,PAGE_SIZE -len, + len +=scnprintf (buf + len,PAGE_SIZE -len,"Segment 2: cmd pass to NVME Layer- " "-to- Driver rcv cmd OP (action)\n" ); - len +=snprintf (buf + len,PAGE_SIZE -len, + len +=scnprintf (buf + len,PAGE_SIZE -len,"avg:%08lld min:%08lld max %08lld\n" ,div_u64 (phba->ktime_seg2_total, phba->ktime_data_samples), phba->ktime_seg2_min, phba->ktime_seg2_max); - len +=snprintf (buf + len,PAGE_SIZE -len, + len +=scnprintf (buf + len,PAGE_SIZE -len,"Segment 3: Driver rcv cmd OP -to- " "Firmware WQ doorbell: cmd\n" ); - len +=snprintf (buf + len,PAGE_SIZE -len, + len +=scnprintf (buf + len,PAGE_SIZE -len,"avg:%08lld min:%08lld max %08lld\n" ,div_u64 (phba->ktime_seg3_total, phba->ktime_data_samples), phba->ktime_seg3_min, phba->ktime_seg3_max); - len +=snprintf (buf + len,PAGE_SIZE -len, + len +=scnprintf (buf + len,PAGE_SIZE -len,"Segment 4: Firmware WQ doorbell: cmd " "-to- MSI-X ISR for cmd cmpl\n" ); - len +=snprintf (buf + len,PAGE_SIZE -len, + len +=scnprintf (buf + len,PAGE_SIZE -len,"avg:%08lld min:%08lld max %08lld\n" ,div_u64 (phba->ktime_seg4_total, phba->ktime_data_samples), phba->ktime_seg4_min, phba->ktime_seg4_max); - len +=snprintf (buf + len,PAGE_SIZE -len, + len +=scnprintf (buf + len,PAGE_SIZE -len,"Segment 5: MSI-X ISR for cmd cmpl " "-to- NVME layer passed cmd done\n" ); - len += snprintf(buf + len, PAGE_SIZE-len, + len += scnprintf(buf + len, PAGE_SIZE-len, "avg:%08lld min:%08lld max %08lld\n", div_u64(phba->ktime_seg5_total, phba->ktime_data_samples),@@ -1117,10 +1117,10 @@ lpfc_debugfs_nvmektime_data(struct lpfc_vport *vport, char *buf, int size) phba->ktime_seg5_max);if (phba->ktime_status_samples ==0 ) { - len +=snprintf (buf + len,PAGE_SIZE -len, + len +=scnprintf (buf + len,PAGE_SIZE -len,"Total: cmd received by MSI-X ISR " "-to- cmd completed on wire\n" ); - len += snprintf(buf + len, PAGE_SIZE-len, + len += scnprintf(buf + len, PAGE_SIZE-len, "avg:%08lld min:%08lld " "max %08lld\n", div_u64(phba->ktime_seg10_total,@@ -1130,46 +1130,46 @@ lpfc_debugfs_nvmektime_data(struct lpfc_vport *vport, char *buf, int size)return len; } - len +=snprintf (buf + len,PAGE_SIZE -len, + len +=scnprintf (buf + len,PAGE_SIZE -len,"Segment 6: NVME layer passed cmd done " "-to- Driver rcv rsp status OP\n" ); - len +=snprintf (buf + len,PAGE_SIZE -len, + len +=scnprintf (buf + len,PAGE_SIZE -len,"avg:%08lld min:%08lld max %08lld\n" ,div_u64 (phba->ktime_seg6_total, phba->ktime_status_samples), phba->ktime_seg6_min, phba->ktime_seg6_max); - len +=snprintf (buf + len,PAGE_SIZE -len, + len +=scnprintf (buf + len,PAGE_SIZE -len,"Segment 7: Driver rcv rsp status OP " "-to- Firmware WQ doorbell: status\n" ); - len +=snprintf (buf + len,PAGE_SIZE -len, + len +=scnprintf (buf + len,PAGE_SIZE -len,"avg:%08lld min:%08lld max %08lld\n" ,div_u64 (phba->ktime_seg7_total, phba->ktime_status_samples), phba->ktime_seg7_min, phba->ktime_seg7_max); - len +=snprintf (buf + len,PAGE_SIZE -len, + len +=scnprintf (buf + len,PAGE_SIZE -len,"Segment 8: Firmware WQ doorbell: status" " -to- MSI-X ISR for status cmpl\n" ); - len +=snprintf (buf + len,PAGE_SIZE -len, + len +=scnprintf (buf + len,PAGE_SIZE -len,"avg:%08lld min:%08lld max %08lld\n" ,div_u64 (phba->ktime_seg8_total, phba->ktime_status_samples), phba->ktime_seg8_min, phba->ktime_seg8_max); - len +=snprintf (buf + len,PAGE_SIZE -len, + len +=scnprintf (buf + len,PAGE_SIZE -len,"Segment 9: MSI-X ISR for status cmpl " "-to- NVME layer passed status done\n" ); - len +=snprintf (buf + len,PAGE_SIZE -len, + len +=scnprintf (buf + len,PAGE_SIZE -len,"avg:%08lld min:%08lld max %08lld\n" ,div_u64 (phba->ktime_seg9_total, phba->ktime_status_samples), phba->ktime_seg9_min, phba->ktime_seg9_max); - len +=snprintf (buf + len,PAGE_SIZE -len, + len +=scnprintf (buf + len,PAGE_SIZE -len,"Total: cmd received by MSI-X ISR -to- " "cmd completed on wire\n" ); - len += snprintf(buf + len, PAGE_SIZE-len, + len += scnprintf(buf + len, PAGE_SIZE-len, "avg:%08lld min:%08lld max %08lld\n", div_u64(phba->ktime_seg10_total, phba->ktime_status_samples),@@ -1204,7 +1204,7 @@ lpfc_debugfs_nvmeio_trc_data(struct lpfc_hba *phba, char *buf, int size) (phba->nvmeio_trc_size -1 ); skip = phba->nvmeio_trc_output_idx; - len += snprintf(buf + len, size - len, + len += scnprintf(buf + len, size - len, "%s IO Trace %s: next_idx %d skip %d size %d\n", (phba->nvmet_support ? "NVME" : "NVMET"), (state ? "Enabled" : "Disabled"),@@ -1226,18 +1226,18 @@ lpfc_debugfs_nvmeio_trc_data(struct lpfc_hba *phba, char *buf, int size)if (!dtp->fmt)continue ; - len +=snprintf (buf + len, size - len, dtp->fmt, + len +=scnprintf (buf + len, size - len, dtp->fmt, dtp->data1, dtp->data2, dtp->data3);if (phba->nvmeio_trc_output_idx >= phba->nvmeio_trc_size) { phba->nvmeio_trc_output_idx =0 ; - len +=snprintf (buf + len, size - len, + len +=scnprintf (buf + len, size - len,"Trace Complete\n" ); goto out; }if (len >= (size -LPFC_DEBUG_OUT_LINE_SZ )) { - len +=snprintf (buf + len, size - len, + len +=scnprintf (buf + len, size - len,"Trace Continue (%d of %d)\n" , phba->nvmeio_trc_output_idx, phba->nvmeio_trc_size);@@ -1255,18 +1255,18 @@ lpfc_debugfs_nvmeio_trc_data(struct lpfc_hba *phba, char *buf, int size)if (!dtp->fmt)continue ; - len +=snprintf (buf + len, size - len, dtp->fmt, + len +=scnprintf (buf + len, size - len, dtp->fmt, dtp->data1, dtp->data2, dtp->data3);if (phba->nvmeio_trc_output_idx >= phba->nvmeio_trc_size) { phba->nvmeio_trc_output_idx =0 ; - len +=snprintf (buf + len, size - len, + len +=scnprintf (buf + len, size - len,"Trace Complete\n" ); goto out; }if (len >= (size -LPFC_DEBUG_OUT_LINE_SZ )) { - len +=snprintf (buf + len, size - len, + len +=scnprintf (buf + len, size - len,"Trace Continue (%d of %d)\n" , phba->nvmeio_trc_output_idx, phba->nvmeio_trc_size);@@ -1274,7 +1274,7 @@ lpfc_debugfs_nvmeio_trc_data(struct lpfc_hba *phba, char *buf, int size) } } - len +=snprintf (buf + len, size - len, + len +=scnprintf (buf + len, size - len,"Trace Done\n" ); out:return len;@@ -1306,39 +1306,39 @@ lpfc_debugfs_cpucheck_data(struct lpfc_vport *vport, char *buf, int size)if (phba->nvmet_support ==0 ) {/* NVME Initiator */ - len +=snprintf (buf + len,PAGE_SIZE - len, + len +=scnprintf (buf + len,PAGE_SIZE - len,"CPUcheck %s\n" , (phba->cpucheck_on &LPFC_CHECK_NVME_IO ?"Enabled" :"Disabled" ));for (i =0 ; i < phba->sli4_hba.num_present_cpu; i++) {if (i >=LPFC_CHECK_CPU_CNT )break ; - len +=snprintf (buf + len,PAGE_SIZE - len, + len +=scnprintf (buf + len,PAGE_SIZE - len,"%02d: xmit x%08x cmpl x%08x\n" , i, phba->cpucheck_xmt_io[i], phba->cpucheck_cmpl_io[i]); tot_xmt += phba->cpucheck_xmt_io[i]; tot_cmpl += phba->cpucheck_cmpl_io[i]; } - len +=snprintf (buf + len,PAGE_SIZE - len, + len +=scnprintf (buf + len,PAGE_SIZE - len,"tot:xmit x%08x cmpl x%08x\n" , tot_xmt, tot_cmpl);return len; }/* NVME Target */ - len +=snprintf (buf + len,PAGE_SIZE - len, + len +=scnprintf (buf + len,PAGE_SIZE - len,"CPUcheck %s " , (phba->cpucheck_on &LPFC_CHECK_NVMET_IO ?"IO Enabled - " :"IO Disabled - " )); - len +=snprintf (buf + len,PAGE_SIZE - len, + len +=scnprintf (buf + len,PAGE_SIZE - len,"%s\n" , (phba->cpucheck_on &LPFC_CHECK_NVMET_RCV ?"Rcv Enabled\n" :"Rcv Disabled\n" ));for (i =0 ; i < phba->sli4_hba.num_present_cpu; i++) {if (i >=LPFC_CHECK_CPU_CNT )break ; - len += snprintf(buf + len, PAGE_SIZE - len, + len += scnprintf(buf + len, PAGE_SIZE - len, "%02d: xmit x%08x ccmpl x%08x " "cmpl x%08x rcv x%08x\n", i, phba->cpucheck_xmt_io[i],@@ -1350,7 +1350,7 @@ lpfc_debugfs_cpucheck_data(struct lpfc_vport *vport, char *buf, int size) tot_cmpl += phba->cpucheck_cmpl_io[i]; tot_ccmpl += phba->cpucheck_ccmpl_io[i]; } - len +=snprintf (buf + len,PAGE_SIZE - len, + len +=scnprintf (buf + len,PAGE_SIZE - len,"tot:xmit x%08x ccmpl x%08x cmpl x%08x rcv x%08x\n" , tot_xmt, tot_ccmpl, tot_cmpl, tot_rcv);return len;@@ -1795,28 +1795,28 @@ lpfc_debugfs_dif_err_read(struct file *file, char __user *buf,int cnt =0 ;if (dent == phba->debug_writeGuard) - cnt =snprintf (cbuf,32 ,"%u\n" , phba->lpfc_injerr_wgrd_cnt); + cnt =scnprintf (cbuf,32 ,"%u\n" , phba->lpfc_injerr_wgrd_cnt);else if (dent == phba->debug_writeApp) - cnt =snprintf (cbuf,32 ,"%u\n" , phba->lpfc_injerr_wapp_cnt); + cnt =scnprintf (cbuf,32 ,"%u\n" , phba->lpfc_injerr_wapp_cnt);else if (dent == phba->debug_writeRef) - cnt =snprintf (cbuf,32 ,"%u\n" , phba->lpfc_injerr_wref_cnt); + cnt =scnprintf (cbuf,32 ,"%u\n" , phba->lpfc_injerr_wref_cnt);else if (dent == phba->debug_readGuard) - cnt =snprintf (cbuf,32 ,"%u\n" , phba->lpfc_injerr_rgrd_cnt); + cnt =scnprintf (cbuf,32 ,"%u\n" , phba->lpfc_injerr_rgrd_cnt);else if (dent == phba->debug_readApp) - cnt =snprintf (cbuf,32 ,"%u\n" , phba->lpfc_injerr_rapp_cnt); + cnt =scnprintf (cbuf,32 ,"%u\n" , phba->lpfc_injerr_rapp_cnt);else if (dent == phba->debug_readRef) - cnt =snprintf (cbuf,32 ,"%u\n" , phba->lpfc_injerr_rref_cnt); + cnt =scnprintf (cbuf,32 ,"%u\n" , phba->lpfc_injerr_rref_cnt);else if (dent == phba->debug_InjErrNPortID) - cnt =snprintf (cbuf,32 ,"0x%06x\n" , phba->lpfc_injerr_nportid); + cnt =scnprintf (cbuf,32 ,"0x%06x\n" , phba->lpfc_injerr_nportid);else if (dent == phba->debug_InjErrWWPN) {memcpy (&tmp, &phba->lpfc_injerr_wwpn,sizeof (struct lpfc_name )); tmp =cpu_to_be64 (tmp); - cnt =snprintf (cbuf,32 ,"0x%016llx\n" , tmp); + cnt =scnprintf (cbuf,32 ,"0x%016llx\n" , tmp); }else if (dent == phba->debug_InjErrLBA) {if (phba->lpfc_injerr_lba == (sector_t)(-1 )) - cnt =snprintf (cbuf,32 ,"off\n" ); + cnt =scnprintf (cbuf,32 ,"off\n" );else - cnt =snprintf (cbuf,32 ,"0x%llx\n" , + cnt =scnprintf (cbuf,32 ,"0x%llx\n" , (uint64_t ) phba->lpfc_injerr_lba); }else lpfc_printf_log(phba, KERN_ERR, LOG_INIT,@@ -2622,17 +2622,17 @@ lpfc_idiag_pcicfg_read(struct file *file, char __user *buf, size_t nbytes,switch (count) {case SIZE_U8 :/* byte (8 bits) */ pci_read_config_byte (pdev, where, &u8val); - len +=snprintf (pbuffer+len,LPFC_PCI_CFG_SIZE -len, + len +=scnprintf (pbuffer+len,LPFC_PCI_CFG_SIZE -len,"%03x: %02x\n" , where, u8val);break ;case SIZE_U16 :/* word (16 bits) */ pci_read_config_word (pdev, where, &u16val); - len +=snprintf (pbuffer+len,LPFC_PCI_CFG_SIZE -len, + len +=scnprintf (pbuffer+len,LPFC_PCI_CFG_SIZE -len,"%03x: %04x\n" , where, u16val);break ;case SIZE_U32 :/* double word (32 bits) */ pci_read_config_dword (pdev, where, &u32val); - len +=snprintf (pbuffer+len,LPFC_PCI_CFG_SIZE -len, + len +=scnprintf (pbuffer+len,LPFC_PCI_CFG_SIZE -len,"%03x: %08x\n" , where, u32val);break ;case LPFC_PCI_CFG_BROWSE :/* browse all */ @@ -2652,25 +2652,25 @@ lpfc_idiag_pcicfg_read(struct file *file, char __user *buf, size_t nbytes, offset = offset_label;/* Read PCI config space */ - len +=snprintf (pbuffer+len,LPFC_PCI_CFG_SIZE -len, + len +=scnprintf (pbuffer+len,LPFC_PCI_CFG_SIZE -len,"%03x: " , offset_label);while (index >0 ) {pci_read_config_dword (pdev, offset, &u32val); - len +=snprintf (pbuffer+len,LPFC_PCI_CFG_SIZE -len, + len +=scnprintf (pbuffer+len,LPFC_PCI_CFG_SIZE -len,"%08x " , u32val); offset +=sizeof (uint32_t );if (offset >=LPFC_PCI_CFG_SIZE ) { - len +=snprintf (pbuffer+len, + len +=scnprintf (pbuffer+len,LPFC_PCI_CFG_SIZE -len,"\n" );break ; } index -=sizeof (uint32_t );if (!index) - len +=snprintf (pbuffer+len,LPFC_PCI_CFG_SIZE -len, + len +=scnprintf (pbuffer+len,LPFC_PCI_CFG_SIZE -len,"\n" );else if (!(index % (8 *sizeof (uint32_t )))) { offset_label += (8 *sizeof (uint32_t )); - len +=snprintf (pbuffer+len,LPFC_PCI_CFG_SIZE -len, + len +=scnprintf (pbuffer+len,LPFC_PCI_CFG_SIZE -len,"\n%03x: " , offset_label); } }@@ -2941,7 +2941,7 @@ lpfc_idiag_baracc_read(struct file *file, char __user *buf, size_t nbytes,if (acc_range ==SINGLE_WORD ) { offset_run = offset; u32val =readl (mem_mapped_bar + offset_run); - len +=snprintf (pbuffer+len,LPFC_PCI_BAR_RD_BUF_SIZE -len, + len +=scnprintf (pbuffer+len,LPFC_PCI_BAR_RD_BUF_SIZE -len,"%05x: %08x\n" , offset_run, u32val); }else goto baracc_browse;@@ -2955,35 +2955,35 @@ lpfc_idiag_baracc_read(struct file *file, char __user *buf, size_t nbytes, offset_run = offset_label;/* Read PCI bar memory mapped space */ - len +=snprintf (pbuffer+len,LPFC_PCI_BAR_RD_BUF_SIZE -len, + len +=scnprintf (pbuffer+len,LPFC_PCI_BAR_RD_BUF_SIZE -len,"%05x: " , offset_label); index =LPFC_PCI_BAR_RD_SIZE ;while (index >0 ) { u32val =readl (mem_mapped_bar + offset_run); - len +=snprintf (pbuffer+len,LPFC_PCI_BAR_RD_BUF_SIZE -len, + len +=scnprintf (pbuffer+len,LPFC_PCI_BAR_RD_BUF_SIZE -len,"%08x " , u32val); offset_run +=sizeof (uint32_t );if (acc_range ==LPFC_PCI_BAR_BROWSE ) {if (offset_run >= bar_size) { - len +=snprintf (pbuffer+len, + len +=scnprintf (pbuffer+len,LPFC_PCI_BAR_RD_BUF_SIZE -len,"\n" );break ; } }else {if (offset_run >= offset + (acc_range *sizeof (uint32_t ))) { - len +=snprintf (pbuffer+len, + len +=scnprintf (pbuffer+len,LPFC_PCI_BAR_RD_BUF_SIZE -len,"\n" );break ; } } index -=sizeof (uint32_t );if (!index) - len +=snprintf (pbuffer+len, + len +=scnprintf (pbuffer+len,LPFC_PCI_BAR_RD_BUF_SIZE -len,"\n" );else if (!(index % (8 *sizeof (uint32_t )))) { offset_label += (8 *sizeof (uint32_t )); - len +=snprintf (pbuffer+len, + len +=scnprintf (pbuffer+len,LPFC_PCI_BAR_RD_BUF_SIZE -len,"\n%05x: " , offset_label); }@@ -3156,19 +3156,19 @@ __lpfc_idiag_print_wq(struct lpfc_queue *qp, char *wqtype,if (!qp)return len; - len +=snprintf (pbuffer + len,LPFC_QUE_INFO_GET_BUF_SIZE - len, + len +=scnprintf (pbuffer + len,LPFC_QUE_INFO_GET_BUF_SIZE - len,"\t\t%s WQ info: " , wqtype); - len +=snprintf (pbuffer + len,LPFC_QUE_INFO_GET_BUF_SIZE - len, + len +=scnprintf (pbuffer + len,LPFC_QUE_INFO_GET_BUF_SIZE - len,"AssocCQID[%04d]: WQ-STAT[oflow:x%x posted:x%llx]\n" , qp->assoc_qid, qp->q_cnt_1, (unsigned long long )qp->q_cnt_4); - len +=snprintf (pbuffer + len,LPFC_QUE_INFO_GET_BUF_SIZE - len, + len +=scnprintf (pbuffer + len,LPFC_QUE_INFO_GET_BUF_SIZE - len,"\t\tWQID[%02d], QE-CNT[%04d], QE-SZ[%04d], " "HST-IDX[%04d], PRT-IDX[%04d], PST[%03d]" , qp->queue_id, qp->entry_count, qp->entry_size, qp->host_index, qp->hba_index, qp->entry_repost); - len +=snprintf (pbuffer + len, + len +=scnprintf (pbuffer + len,LPFC_QUE_INFO_GET_BUF_SIZE - len,"\n" );return len; }@@ -3206,21 +3206,21 @@ __lpfc_idiag_print_cq(struct lpfc_queue *qp, char *cqtype,if (!qp)return len; - len +=snprintf (pbuffer + len,LPFC_QUE_INFO_GET_BUF_SIZE - len, + len +=scnprintf (pbuffer + len,LPFC_QUE_INFO_GET_BUF_SIZE - len,"\t%s CQ info: " , cqtype); - len +=snprintf (pbuffer + len,LPFC_QUE_INFO_GET_BUF_SIZE - len, + len +=scnprintf (pbuffer + len,LPFC_QUE_INFO_GET_BUF_SIZE - len,"AssocEQID[%02d]: CQ STAT[max:x%x relw:x%x " "xabt:x%x wq:x%llx]\n" , qp->assoc_qid, qp->q_cnt_1, qp->q_cnt_2, qp->q_cnt_3, (unsigned long long )qp->q_cnt_4); - len +=snprintf (pbuffer + len,LPFC_QUE_INFO_GET_BUF_SIZE - len, + len +=scnprintf (pbuffer + len,LPFC_QUE_INFO_GET_BUF_SIZE - len,"\tCQID[%02d], QE-CNT[%04d], QE-SZ[%04d], " "HST-IDX[%04d], PRT-IDX[%04d], PST[%03d]" , qp->queue_id, qp->entry_count, qp->entry_size, qp->host_index, qp->hba_index, qp->entry_repost); - len +=snprintf (pbuffer + len,LPFC_QUE_INFO_GET_BUF_SIZE - len,"\n" ); + len +=scnprintf (pbuffer + len,LPFC_QUE_INFO_GET_BUF_SIZE - len,"\n" );return len; }@@ -3232,19 +3232,19 @@ __lpfc_idiag_print_rqpair(struct lpfc_queue *qp, struct lpfc_queue *datqp,if (!qp || !datqp)return len; - len +=snprintf (pbuffer + len,LPFC_QUE_INFO_GET_BUF_SIZE - len, + len +=scnprintf (pbuffer + len,LPFC_QUE_INFO_GET_BUF_SIZE - len,"\t\t%s RQ info: " , rqtype); - len +=snprintf (pbuffer + len,LPFC_QUE_INFO_GET_BUF_SIZE - len, + len +=scnprintf (pbuffer + len,LPFC_QUE_INFO_GET_BUF_SIZE - len,"AssocCQID[%02d]: RQ-STAT[nopost:x%x nobuf:x%x " "posted:x%x rcv:x%llx]\n" , qp->assoc_qid, qp->q_cnt_1, qp->q_cnt_2, qp->q_cnt_3, (unsigned long long )qp->q_cnt_4); - len +=snprintf (pbuffer + len,LPFC_QUE_INFO_GET_BUF_SIZE - len, + len +=scnprintf (pbuffer + len,LPFC_QUE_INFO_GET_BUF_SIZE - len,"\t\tHQID[%02d], QE-CNT[%04d], QE-SZ[%04d], " "HST-IDX[%04d], PRT-IDX[%04d], PST[%03d]\n" , qp->queue_id, qp->entry_count, qp->entry_size, qp->host_index, qp->hba_index, qp->entry_repost); - len += snprintf(pbuffer + len, LPFC_QUE_INFO_GET_BUF_SIZE - len, + len += scnprintf(pbuffer + len, LPFC_QUE_INFO_GET_BUF_SIZE - len, "\t\tDQID[%02d], QE-CNT[%04d], QE-SZ[%04d], " "HST-IDX[%04d], PRT-IDX[%04d], PST[%03d]\n", datqp->queue_id, datqp->entry_count,@@ -3329,17 +3329,17 @@ __lpfc_idiag_print_eq(struct lpfc_queue *qp, char *eqtype,if (!qp)return len; - len +=snprintf (pbuffer + len,LPFC_QUE_INFO_GET_BUF_SIZE - len, + len +=scnprintf (pbuffer + len,LPFC_QUE_INFO_GET_BUF_SIZE - len,"\n%s EQ info: EQ-STAT[max:x%x noE:x%x " "cqe_proc:x%x eqe_proc:x%llx eqd %d]\n" , eqtype, qp->q_cnt_1, qp->q_cnt_2, qp->q_cnt_3, (unsigned long long )qp->q_cnt_4, qp->q_mode); - len +=snprintf (pbuffer + len,LPFC_QUE_INFO_GET_BUF_SIZE - len, + len +=scnprintf (pbuffer + len,LPFC_QUE_INFO_GET_BUF_SIZE - len,"EQID[%02d], QE-CNT[%04d], QE-SZ[%04d], " "HST-IDX[%04d], PRT-IDX[%04d], PST[%03d]" , qp->queue_id, qp->entry_count, qp->entry_size, qp->host_index, qp->hba_index, qp->entry_repost); - len +=snprintf (pbuffer + len,LPFC_QUE_INFO_GET_BUF_SIZE - len,"\n" ); + len +=scnprintf (pbuffer + len,LPFC_QUE_INFO_GET_BUF_SIZE - len,"\n" );return len; }@@ -3397,7 +3397,7 @@ lpfc_idiag_queinfo_read(struct file *file, char __user *buf, size_t nbytes,if (phba->cfg_fof ==0 ) phba->lpfc_idiag_last_eq =0 ; - len +=snprintf (pbuffer + len,LPFC_QUE_INFO_GET_BUF_SIZE - len, + len +=scnprintf (pbuffer + len,LPFC_QUE_INFO_GET_BUF_SIZE - len,"EQ %d out of %d HBA EQs\n" , x, phba->io_channel_irqs);@@ -3510,7 +3510,7 @@ lpfc_idiag_queinfo_read(struct file *file, char __user *buf, size_t nbytes,return simple_read_from_buffer (buf, nbytes, ppos, pbuffer, len); too_big: - len +=snprintf (pbuffer + len, + len +=scnprintf (pbuffer + len,LPFC_QUE_INFO_GET_BUF_SIZE - len,"Truncated ...\n" ); out:spin_unlock_irq (&phba->hbalock);@@ -3566,22 +3566,22 @@ lpfc_idiag_queacc_read_qe(char *pbuffer, int len, struct lpfc_queue *pque,return 0 ; esize = pque->entry_size; - len +=snprintf (pbuffer+len,LPFC_QUE_ACC_BUF_SIZE -len, + len +=scnprintf (pbuffer+len,LPFC_QUE_ACC_BUF_SIZE -len,"QE-INDEX[%04d]:\n" , index); offset =0 ; pentry = pque->qe[index].address;while (esize >0 ) { - len +=snprintf (pbuffer+len,LPFC_QUE_ACC_BUF_SIZE -len, + len +=scnprintf (pbuffer+len,LPFC_QUE_ACC_BUF_SIZE -len,"%08x " , *pentry); pentry++; offset +=sizeof (uint32_t ); esize -=sizeof (uint32_t );if (esize >0 && !(offset % (4 *sizeof (uint32_t )))) - len +=snprintf (pbuffer+len, + len +=scnprintf (pbuffer+len,LPFC_QUE_ACC_BUF_SIZE -len,"\n" ); } - len +=snprintf (pbuffer+len,LPFC_QUE_ACC_BUF_SIZE -len,"\n" ); + len +=scnprintf (pbuffer+len,LPFC_QUE_ACC_BUF_SIZE -len,"\n" );return len; }@@ -3987,27 +3987,27 @@ lpfc_idiag_drbacc_read_reg(struct lpfc_hba *phba, char *pbuffer,switch (drbregid) {case LPFC_DRB_EQ : - len +=snprintf (pbuffer + len,LPFC_DRB_ACC_BUF_SIZE -len, + len +=scnprintf (pbuffer + len,LPFC_DRB_ACC_BUF_SIZE -len,"EQ-DRB-REG: 0x%08x\n" ,readl (phba->sli4_hba.EQDBregaddr));break ;case LPFC_DRB_CQ : - len +=snprintf (pbuffer + len,LPFC_DRB_ACC_BUF_SIZE - len, + len +=scnprintf (pbuffer + len,LPFC_DRB_ACC_BUF_SIZE - len,"CQ-DRB-REG: 0x%08x\n" ,readl (phba->sli4_hba.CQDBregaddr));break ;case LPFC_DRB_MQ : - len +=snprintf (pbuffer+len,LPFC_DRB_ACC_BUF_SIZE -len, + len +=scnprintf (pbuffer+len,LPFC_DRB_ACC_BUF_SIZE -len,"MQ-DRB-REG: 0x%08x\n" ,readl (phba->sli4_hba.MQDBregaddr));break ;case LPFC_DRB_WQ : - len +=snprintf (pbuffer+len,LPFC_DRB_ACC_BUF_SIZE -len, + len +=scnprintf (pbuffer+len,LPFC_DRB_ACC_BUF_SIZE -len,"WQ-DRB-REG: 0x%08x\n" ,readl (phba->sli4_hba.WQDBregaddr));break ;case LPFC_DRB_RQ : - len +=snprintf (pbuffer+len,LPFC_DRB_ACC_BUF_SIZE -len, + len +=scnprintf (pbuffer+len,LPFC_DRB_ACC_BUF_SIZE -len,"RQ-DRB-REG: 0x%08x\n" ,readl (phba->sli4_hba.RQDBregaddr));break ;@@ -4197,37 +4197,37 @@ lpfc_idiag_ctlacc_read_reg(struct lpfc_hba *phba, char *pbuffer,switch (ctlregid) {case LPFC_CTL_PORT_SEM : - len +=snprintf (pbuffer+len,LPFC_CTL_ACC_BUF_SIZE -len, + len +=scnprintf (pbuffer+len,LPFC_CTL_ACC_BUF_SIZE -len,"Port SemReg: 0x%08x\n" ,readl (phba->sli4_hba.conf_regs_memmap_p +LPFC_CTL_PORT_SEM_OFFSET ));break ;case LPFC_CTL_PORT_STA : - len +=snprintf (pbuffer+len,LPFC_CTL_ACC_BUF_SIZE -len, + len +=scnprintf (pbuffer+len,LPFC_CTL_ACC_BUF_SIZE -len,"Port StaReg: 0x%08x\n" ,readl (phba->sli4_hba.conf_regs_memmap_p +LPFC_CTL_PORT_STA_OFFSET ));break ;case LPFC_CTL_PORT_CTL : - len +=snprintf (pbuffer+len,LPFC_CTL_ACC_BUF_SIZE -len, + len +=scnprintf (pbuffer+len,LPFC_CTL_ACC_BUF_SIZE -len,"Port CtlReg: 0x%08x\n" ,readl (phba->sli4_hba.conf_regs_memmap_p +LPFC_CTL_PORT_CTL_OFFSET ));break ;case LPFC_CTL_PORT_ER1 : - len +=snprintf (pbuffer+len,LPFC_CTL_ACC_BUF_SIZE -len, + len +=scnprintf (pbuffer+len,LPFC_CTL_ACC_BUF_SIZE -len,"Port Er1Reg: 0x%08x\n" ,readl (phba->sli4_hba.conf_regs_memmap_p +LPFC_CTL_PORT_ER1_OFFSET ));break ;case LPFC_CTL_PORT_ER2 : - len +=snprintf (pbuffer+len,LPFC_CTL_ACC_BUF_SIZE -len, + len +=scnprintf (pbuffer+len,LPFC_CTL_ACC_BUF_SIZE -len,"Port Er2Reg: 0x%08x\n" ,readl (phba->sli4_hba.conf_regs_memmap_p +LPFC_CTL_PORT_ER2_OFFSET ));break ;case LPFC_CTL_PDEV_CTL : - len +=snprintf (pbuffer+len,LPFC_CTL_ACC_BUF_SIZE -len, + len +=scnprintf (pbuffer+len,LPFC_CTL_ACC_BUF_SIZE -len,"PDev CtlReg: 0x%08x\n" ,readl (phba->sli4_hba.conf_regs_memmap_p +LPFC_CTL_PDEV_CTL_OFFSET ));@@ -4420,13 +4420,13 @@ lpfc_idiag_mbxacc_get_setup(struct lpfc_hba *phba, char *pbuffer) mbx_dump_cnt = idiag.cmd.data[IDIAG_MBXACC_DPCNT_INDX ]; mbx_word_cnt = idiag.cmd.data[IDIAG_MBXACC_WDCNT_INDX ]; - len +=snprintf (pbuffer+len,LPFC_MBX_ACC_BUF_SIZE -len, + len +=scnprintf (pbuffer+len,LPFC_MBX_ACC_BUF_SIZE -len,"mbx_dump_map: 0x%08x\n" , mbx_dump_map); - len +=snprintf (pbuffer+len,LPFC_MBX_ACC_BUF_SIZE -len, + len +=scnprintf (pbuffer+len,LPFC_MBX_ACC_BUF_SIZE -len,"mbx_dump_cnt: %04d\n" , mbx_dump_cnt); - len +=snprintf (pbuffer+len,LPFC_MBX_ACC_BUF_SIZE -len, + len +=scnprintf (pbuffer+len,LPFC_MBX_ACC_BUF_SIZE -len,"mbx_word_cnt: %04d\n" , mbx_word_cnt); - len +=snprintf (pbuffer+len,LPFC_MBX_ACC_BUF_SIZE -len, + len +=scnprintf (pbuffer+len,LPFC_MBX_ACC_BUF_SIZE -len,"mbx_mbox_cmd: 0x%02x\n" , mbx_mbox_cmd);return len;@@ -4575,35 +4575,35 @@ lpfc_idiag_extacc_avail_get(struct lpfc_hba *phba, char *pbuffer, int len) {uint16_t ext_cnt, ext_size; - len +=snprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len, + len +=scnprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len,"\nAvailable Extents Information:\n" ); - len +=snprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len, + len +=scnprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len,"\tPort Available VPI extents: " );lpfc_sli4_get_avail_extnt_rsrc (phba,LPFC_RSC_TYPE_FCOE_VPI , &ext_cnt, &ext_size); - len +=snprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len, + len +=scnprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len,"Count %3d, Size %3d\n" , ext_cnt, ext_size); - len +=snprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len, + len +=scnprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len,"\tPort Available VFI extents: " );lpfc_sli4_get_avail_extnt_rsrc (phba,LPFC_RSC_TYPE_FCOE_VFI , &ext_cnt, &ext_size); - len +=snprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len, + len +=scnprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len,"Count %3d, Size %3d\n" , ext_cnt, ext_size); - len +=snprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len, + len +=scnprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len,"\tPort Available RPI extents: " );lpfc_sli4_get_avail_extnt_rsrc (phba,LPFC_RSC_TYPE_FCOE_RPI , &ext_cnt, &ext_size); - len +=snprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len, + len +=scnprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len,"Count %3d, Size %3d\n" , ext_cnt, ext_size); - len +=snprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len, + len +=scnprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len,"\tPort Available XRI extents: " );lpfc_sli4_get_avail_extnt_rsrc (phba,LPFC_RSC_TYPE_FCOE_XRI , &ext_cnt, &ext_size); - len +=snprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len, + len +=scnprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len,"Count %3d, Size %3d\n" , ext_cnt, ext_size);return len;@@ -4627,55 +4627,55 @@ lpfc_idiag_extacc_alloc_get(struct lpfc_hba *phba, char *pbuffer, int len)uint16_t ext_cnt, ext_size;int rc; - len +=snprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len, + len +=scnprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len,"\nAllocated Extents Information:\n" ); - len +=snprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len, + len +=scnprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len,"\tHost Allocated VPI extents: " ); rc =lpfc_sli4_get_allocated_extnts (phba,LPFC_RSC_TYPE_FCOE_VPI , &ext_cnt, &ext_size);if (!rc) - len +=snprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len, + len +=scnprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len,"Port %d Extent %3d, Size %3d\n" , phba->brd_no, ext_cnt, ext_size);else - len +=snprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len, + len +=scnprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len,"N/A\n" ); - len +=snprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len, + len +=scnprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len,"\tHost Allocated VFI extents: " ); rc =lpfc_sli4_get_allocated_extnts (phba,LPFC_RSC_TYPE_FCOE_VFI , &ext_cnt, &ext_size);if (!rc) - len +=snprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len, + len +=scnprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len,"Port %d Extent %3d, Size %3d\n" , phba->brd_no, ext_cnt, ext_size);else - len +=snprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len, + len +=scnprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len,"N/A\n" ); - len +=snprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len, + len +=scnprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len,"\tHost Allocated RPI extents: " ); rc =lpfc_sli4_get_allocated_extnts (phba,LPFC_RSC_TYPE_FCOE_RPI , &ext_cnt, &ext_size);if (!rc) - len +=snprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len, + len +=scnprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len,"Port %d Extent %3d, Size %3d\n" , phba->brd_no, ext_cnt, ext_size);else - len +=snprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len, + len +=scnprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len,"N/A\n" ); - len +=snprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len, + len +=scnprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len,"\tHost Allocated XRI extents: " ); rc =lpfc_sli4_get_allocated_extnts (phba,LPFC_RSC_TYPE_FCOE_XRI , &ext_cnt, &ext_size);if (!rc) - len +=snprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len, + len +=scnprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len,"Port %d Extent %3d, Size %3d\n" , phba->brd_no, ext_cnt, ext_size);else - len +=snprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len, + len +=scnprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len,"N/A\n" );return len;@@ -4699,49 +4699,49 @@ lpfc_idiag_extacc_drivr_get(struct lpfc_hba *phba, char *pbuffer, int len)struct lpfc_rsrc_blks *rsrc_blks;int index; - len +=snprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len, + len +=scnprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len,"\nDriver Extents Information:\n" ); - len +=snprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len, + len +=scnprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len,"\tVPI extents:\n" ); index =0 ;list_for_each_entry (rsrc_blks, &phba->lpfc_vpi_blk_list, list) { - len +=snprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len, + len +=scnprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len,"\t\tBlock %3d: Start %4d, Count %4d\n" , index, rsrc_blks->rsrc_start, rsrc_blks->rsrc_size); index++; } - len +=snprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len, + len +=scnprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len,"\tVFI extents:\n" ); index =0 ;list_for_each_entry (rsrc_blks, &phba->sli4_hba.lpfc_vfi_blk_list, list) { - len +=snprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len, + len +=scnprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len,"\t\tBlock %3d: Start %4d, Count %4d\n" , index, rsrc_blks->rsrc_start, rsrc_blks->rsrc_size); index++; } - len +=snprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len, + len +=scnprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len,"\tRPI extents:\n" ); index =0 ;list_for_each_entry (rsrc_blks, &phba->sli4_hba.lpfc_rpi_blk_list, list) { - len +=snprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len, + len +=scnprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len,"\t\tBlock %3d: Start %4d, Count %4d\n" , index, rsrc_blks->rsrc_start, rsrc_blks->rsrc_size); index++; } - len +=snprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len, + len +=scnprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len,"\tXRI extents:\n" ); index =0 ;list_for_each_entry (rsrc_blks, &phba->sli4_hba.lpfc_xri_blk_list, list) { - len +=snprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len, + len +=scnprintf (pbuffer+len,LPFC_EXT_ACC_BUF_SIZE -len,"\t\tBlock %3d: Start %4d, Count %4d\n" , index, rsrc_blks->rsrc_start, rsrc_blks->rsrc_size);@@ -5135,11 +5135,11 @@ lpfc_idiag_mbxacc_dump_bsg_mbox(struct lpfc_hba *phba, enum nemb_type nemb_tp,if (i !=0 )pr_err ("%s\n" , line_buf); len =0 ; - len +=snprintf (line_buf+len, + len +=scnprintf (line_buf+len,LPFC_MBX_ACC_LBUF_SZ -len,"%03d: " , i); } - len +=snprintf (line_buf+len,LPFC_MBX_ACC_LBUF_SZ -len, + len +=scnprintf (line_buf+len,LPFC_MBX_ACC_LBUF_SZ -len,"%08x " , (uint32_t )*pword); pword++; }@@ -5202,11 +5202,11 @@ lpfc_idiag_mbxacc_dump_issue_mbox(struct lpfc_hba *phba, MAILBOX_t *pmbox)pr_err ("%s\n" , line_buf); len =0 ;memset (line_buf,0 ,LPFC_MBX_ACC_LBUF_SZ ); - len +=snprintf (line_buf+len, + len +=scnprintf (line_buf+len,LPFC_MBX_ACC_LBUF_SZ -len,"%03d: " , i); } - len +=snprintf (line_buf+len,LPFC_MBX_ACC_LBUF_SZ -len, + len +=scnprintf (line_buf+len,LPFC_MBX_ACC_LBUF_SZ -len,"%08x " , ((uint32_t )*pword) &0xffffffff ); pword++;@@ -5225,18 +5225,18 @@ lpfc_idiag_mbxacc_dump_issue_mbox(struct lpfc_hba *phba, MAILBOX_t *pmbox)pr_err ("%s\n" , line_buf); len =0 ;memset (line_buf,0 ,LPFC_MBX_ACC_LBUF_SZ ); - len +=snprintf (line_buf+len, + len +=scnprintf (line_buf+len,LPFC_MBX_ACC_LBUF_SZ -len,"%03d: " , i); }for (j =0 ; j <4 ; j++) { - len +=snprintf (line_buf+len, + len +=scnprintf (line_buf+len,LPFC_MBX_ACC_LBUF_SZ -len,"%02x" , ((uint8_t )*pbyte) &0xff ); pbyte++; } - len +=snprintf (line_buf+len, + len +=scnprintf (line_buf+len,LPFC_MBX_ACC_LBUF_SZ -len," " ); }if ((i -1 ) %8 ) --2.19.2
Signature · 1 line
Kees Cook
James Smart
Reviewed-byRe: [PATCH 5/8] scsi: lpfc: change snprintf to scnprintf for possible overflow
Quoted 33 lines · Kees Cook
Quoted 24 lines · Willy Tarreau
From: Silvio Cesare<[email protected]>
Change snprintf to scnprintf. There are generally two cases where using snprintf causes problems.
1) Uses of size +=
snprintf(buf, SIZE - size, fmt, ...)
In this case, if snprintf would have written more characters than what the buffer size (SIZE) is, then size will end up larger than SIZE. In later uses of snprintf, SIZE - size will result in a negative number, leading to problems. Note that size might already be too large by using size = snprintf before the code reaches a case of size += snprintf.2) If size is ultimately used as a length parameter for a copy back to user space, then it will potentially allow for a buffer overflow and information disclosure when size is greater than SIZE. When the size is used to index the buffer directly, we can have memory corruption. This also means when size = snprintf... is used, it may also cause problems since size may become large. Copying to userspace is mitigated by the
HARDENED_USERCOPYkernel configuration.The solution to these issues is to use scnprintf which returns the number of characters actually written to the buffer, so the size variable will never exceed SIZE.
Quoted 8 lines
Signed-off-by Silvio Cesare<[email protected]>Cc James Smart<[email protected]>Cc Dick Kennedy<[email protected]>Cc Dan Carpenter<[email protected]>Cc Kees Cook<[email protected]>Cc Will Deacon<[email protected]>Cc Greg KH<[email protected]>Signed-off-by Willy Tarreau<[email protected]>
Quoted 6 lines
I think this needs Cc: stable.
Reviewed-by Kees Cook<[email protected]>-Kees
-- james
Re: [PATCH 5/8] scsi: lpfc: change snprintf to scnprintf for possible overflow
Quoted 37 lines · James Smart
Quoted 35 lines · Kees Cook
Quoted 24 lines · Willy Tarreau
From: Silvio Cesare<[email protected]>
Change snprintf to scnprintf. There are generally two cases where using snprintf causes problems.
1) Uses of size +=
snprintf(buf, SIZE - size, fmt, ...)
In this case, if snprintf would have written more characters than what the buffer size (SIZE) is, then size will end up larger than SIZE. In later uses of snprintf, SIZE - size will result in a negative number, leading to problems. Note that size might already be too large by using size = snprintf before the code reaches a case of size += snprintf.2) If size is ultimately used as a length parameter for a copy back to user space, then it will potentially allow for a buffer overflow and information disclosure when size is greater than SIZE. When the size is used to index the buffer directly, we can have memory corruption. This also means when size = snprintf... is used, it may also cause problems since size may become large. Copying to userspace is mitigated by the
HARDENED_USERCOPYkernel configuration.The solution to these issues is to use scnprintf which returns the number of characters actually written to the buffer, so the size variable will never exceed SIZE.
Quoted 8 lines
Signed-off-by Silvio Cesare<[email protected]>Cc James Smart<[email protected]>Cc Dick Kennedy<[email protected]>Cc Dan Carpenter<[email protected]>Cc Kees Cook<[email protected]>Cc Will Deacon<[email protected]>Cc Greg KH<[email protected]>Signed-off-by Willy Tarreau<[email protected]>I think this needs Cc: stable.
Quoted 7 lines
Quoted 4 lines
Reviewed-by Kees Cook<[email protected]>-Kees
Reviewed-by James Smart <[email protected]>
What ever happened to this patch? Did it get dropped somehow?
thanks,
greg k-h
Re: [PATCH 5/8] scsi: lpfc: change snprintf to scnprintf for possible overflow
Quoted 42 lines · Greg KH
Quoted 41 lines · James Smart
Quoted 39 lines · Kees Cook
Quoted 24 lines · Willy Tarreau
From: Silvio Cesare<[email protected]>
Change snprintf to scnprintf. There are generally two cases where using snprintf causes problems.
1) Uses of size +=
snprintf(buf, SIZE - size, fmt, ...)
In this case, if snprintf would have written more characters than what the buffer size (SIZE) is, then size will end up larger than SIZE. In later uses of snprintf, SIZE - size will result in a negative number, leading to problems. Note that size might already be too large by using size = snprintf before the code reaches a case of size += snprintf.2) If size is ultimately used as a length parameter for a copy back to user space, then it will potentially allow for a buffer overflow and information disclosure when size is greater than SIZE. When the size is used to index the buffer directly, we can have memory corruption. This also means when size = snprintf... is used, it may also cause problems since size may become large. Copying to userspace is mitigated by the
HARDENED_USERCOPYkernel configuration.The solution to these issues is to use scnprintf which returns the number of characters actually written to the buffer, so the size variable will never exceed SIZE.
Quoted 8 lines
Signed-off-by Silvio Cesare<[email protected]>Cc James Smart<[email protected]>Cc Dick Kennedy<[email protected]>Cc Dan Carpenter<[email protected]>Cc Kees Cook<[email protected]>Cc Will Deacon<[email protected]>Cc Greg KH<[email protected]>Signed-off-by Willy Tarreau<[email protected]>I think this needs Cc: stable.
Reviewed-by Kees Cook<[email protected]>-Kees
Quoted 6 lines
Quoted 1 line
Reviewed-by James Smart <[email protected]>What ever happened to this patch? Did it get dropped somehow?
thanks,
greg k-h
I assume it wasn't pulled in by the scsi maintainers. I'll go ping them.
-- james
Re: [PATCH 5/8] scsi: lpfc: change snprintf to scnprintf for possible overflow
In reply to Greg KHQuoted 42 lines · Greg KH
Quoted 41 lines · James Smart
Quoted 39 lines · Kees Cook
Quoted 24 lines · Willy Tarreau
From: Silvio Cesare<[email protected]>
Change snprintf to scnprintf. There are generally two cases where using snprintf causes problems.
1) Uses of size +=
snprintf(buf, SIZE - size, fmt, ...)
In this case, if snprintf would have written more characters than what the buffer size (SIZE) is, then size will end up larger than SIZE. In later uses of snprintf, SIZE - size will result in a negative number, leading to problems. Note that size might already be too large by using size = snprintf before the code reaches a case of size += snprintf.2) If size is ultimately used as a length parameter for a copy back to user space, then it will potentially allow for a buffer overflow and information disclosure when size is greater than SIZE. When the size is used to index the buffer directly, we can have memory corruption. This also means when size = snprintf... is used, it may also cause problems since size may become large. Copying to userspace is mitigated by the
HARDENED_USERCOPYkernel configuration.The solution to these issues is to use scnprintf which returns the number of characters actually written to the buffer, so the size variable will never exceed SIZE.
Quoted 8 lines
Signed-off-by Silvio Cesare<[email protected]>Cc James Smart<[email protected]>Cc Dick Kennedy<[email protected]>Cc Dan Carpenter<[email protected]>Cc Kees Cook<[email protected]>Cc Will Deacon<[email protected]>Cc Greg KH<[email protected]>Signed-off-by Willy Tarreau<[email protected]>I think this needs Cc: stable.
Reviewed-by Kees Cook<[email protected]>-Kees
Quoted 6 lines
Quoted 1 line
Reviewed-by James Smart <[email protected]>What ever happened to this patch? Did it get dropped somehow?
thanks,
greg k-h
I talked with them and will make sure it's pulled in shortly.
-- james
PATCH 6/8 ASoC: intel: skylake: change snprintf to scnprintf for possible overflow
In reply to Willy TarreauFrom: Silvio Cesare <[email protected]>
Change snprintf to scnprintf. There are generally two cases where using snprintf causes problems.
1) Uses of size += snprintf(buf, SIZE - size, fmt, ...)
In this case, if snprintf would have written more characters than what the buffer size (SIZE) is, then size will end up larger than SIZE. In later uses of snprintf, SIZE - size will result in a negative number, leading to problems. Note that size might already be too large by using size = snprintf before the code reaches a case of size += snprintf.
2) If size is ultimately used as a length parameter for a copy back to user space, then it will potentially allow for a buffer overflow and information disclosure when size is greater than SIZE. When the size is used to index the buffer directly, we can have memory corruption. This also means when size = snprintf... is used, it may also cause problems since size may become large. Copying to userspace is mitigated by the HARDENED_USERCOPY kernel configuration.
The solution to these issues is to use scnprintf which returns the number of characters actually written to the buffer, so the size variable will never exceed SIZE.
--- sound/soc/intel/skylake/skl-debug.c | 28 ++++++++++++++-------------- 1 file changed, 14 insertions(+), 14 deletions(-)
sound/soc/intel/skylake/skl-debug.c +14 -14
@@ -43,7 +43,7 @@ static ssize_t skl_print_pins(struct skl_module_pin *m_pin, char *buf,ssize_t ret =0 ;for (i =0 ; i < max_pin; i++) - ret += snprintf(buf + size, MOD_BUF - size, + ret += scnprintf(buf + size, MOD_BUF - size, "%s %d\n\tModule %d\n\tInstance %d\n\t" "In-used %s\n\tType %s\n" "\tState %d\n\tIndex %d\n",
@@ -59,7 +59,7 @@ static ssize_t skl_print_pins(struct skl_module_pin *m_pin, char *buf,static ssize_t skl_print_fmt (struct skl_module_fmt *fmt,char *buf,ssize_t size,bool direction) { - return snprintf(buf + size, MOD_BUF - size, + return scnprintf(buf + size, MOD_BUF - size, "%s\n\tCh %d\n\tFreq %d\n\tBit depth %d\n\t" "Valid bit depth %d\n\tCh config %#x\n\tInterleaving %d\n\t" "Sample Type %d\n\tCh Map %#x\n",
@@ -81,16 +81,16 @@ static ssize_t module_read(struct file *file, char __user *user_buf,if (!buf)return -ENOMEM ; - ret =snprintf (buf,MOD_BUF ,"Module:\n\tUUID %pUL\n\tModule id %d\n" + ret =scnprintf (buf,MOD_BUF ,"Module:\n\tUUID %pUL\n\tModule id %d\n" "\tInstance id %d\n\tPvt_id %d\n" , mconfig->guid, mconfig->id.module_id, mconfig->id.instance_id, mconfig->id.pvt_id); - ret +=snprintf (buf + ret,MOD_BUF - ret, + ret +=scnprintf (buf + ret,MOD_BUF - ret,"Resources:\n\tMCPS %#x\n\tIBS %#x\n\tOBS %#x\t\n" , mconfig->mcps, mconfig->ibs, mconfig->obs); - ret += snprintf(buf + ret, MOD_BUF - ret, + ret += scnprintf(buf + ret, MOD_BUF - ret, "Module data:\n\tCore %d\n\tIn queue %d\n\t" "Out queue %d\n\tType %s\n", mconfig->core_id, mconfig->max_in_queue,
@@ -100,38 +100,38 @@ static ssize_t module_read(struct file *file, char __user *user_buf, ret +=skl_print_fmt (mconfig->in_fmt, buf, ret, true); ret +=skl_print_fmt (mconfig->out_fmt, buf, ret, false); - ret +=snprintf (buf + ret,MOD_BUF - ret, + ret +=scnprintf (buf + ret,MOD_BUF - ret,"Fixup:\n\tParams %#x\n\tConverter %#x\n" , mconfig->params_fixup, mconfig->converter); - ret +=snprintf (buf + ret,MOD_BUF - ret, + ret +=scnprintf (buf + ret,MOD_BUF - ret,"Module Gateway:\n\tType %#x\n\tVbus %#x\n\tHW conn %#x\n\tSlot %#x\n" , mconfig->dev_type, mconfig->vbus_id, mconfig->hw_conn_type, mconfig->time_slot); - ret +=snprintf (buf + ret,MOD_BUF - ret, + ret +=scnprintf (buf + ret,MOD_BUF - ret,"Pipeline:\n\tID %d\n\tPriority %d\n\tConn Type %d\n\t" "Pages %#x\n" , mconfig->pipe->ppl_id, mconfig->pipe->pipe_priority, mconfig->pipe->conn_type, mconfig->pipe->memory_pages); - ret +=snprintf (buf + ret,MOD_BUF - ret, + ret +=scnprintf (buf + ret,MOD_BUF - ret,"\tParams:\n\t\tHost DMA %d\n\t\tLink DMA %d\n" , mconfig->pipe->p_params->host_dma_id, mconfig->pipe->p_params->link_dma_id); - ret +=snprintf (buf + ret,MOD_BUF - ret, + ret +=scnprintf (buf + ret,MOD_BUF - ret,"\tPCM params:\n\t\tCh %d\n\t\tFreq %d\n\t\tFormat %d\n" , mconfig->pipe->p_params->ch, mconfig->pipe->p_params->s_freq, mconfig->pipe->p_params->s_fmt); - ret +=snprintf (buf + ret,MOD_BUF - ret, + ret +=scnprintf (buf + ret,MOD_BUF - ret,"\tLink %#x\n\tStream %#x\n" , mconfig->pipe->p_params->linktype, mconfig->pipe->p_params->stream); - ret +=snprintf (buf + ret,MOD_BUF - ret, + ret +=scnprintf (buf + ret,MOD_BUF - ret,"\tState %d\n\tPassthru %s\n" , mconfig->pipe->state, mconfig->pipe->passthru ?"true" :"false" );
@@ -141,7 +141,7 @@ static ssize_t module_read(struct file *file, char __user *user_buf, ret +=skl_print_pins (mconfig->m_out_pin, buf, mconfig->max_out_queue, ret, false); - ret +=snprintf (buf + ret,MOD_BUF - ret, + ret +=scnprintf (buf + ret,MOD_BUF - ret,"Other:\n\tDomain %d\n\tHomogeneous Input %s\n\t" "Homogeneous Output %s\n\tIn Queue Mask %d\n\t" "Out Queue Mask %d\n\tDMA ID %d\n\tMem Pages %d\n\t"
@@ -199,7 +199,7 @@ static ssize_t fw_softreg_read(struct file *file, char __user *user_buf,__iowrite32_copy (d->fw_read_buff, fw_reg_addr, w0_stat_sz >>2 );for (offset =0 ; offset <FW_REG_SIZE ; offset +=16 ) { - ret +=snprintf (tmp + ret,FW_REG_BUF - ret,"%#.4x: " , offset); + ret +=scnprintf (tmp + ret,FW_REG_BUF - ret,"%#.4x: " , offset);hex_dump_to_buffer (d->fw_read_buff + offset,16 ,16 ,4 , tmp + ret,FW_REG_BUF - ret,0 ); ret +=strlen (tmp + ret);
Signature · 1 line
2.19.2
Re: [PATCH 6/8] ASoC: intel: skylake: change snprintf to scnprintf for possible overflow
Quoted 25 lines · Willy Tarreau
From: Silvio Cesare <[email protected]>
Change snprintf to scnprintf. There are generally two cases where using snprintf causes problems.
1) Uses of size +=
snprintf(buf, SIZE - size, fmt, ...)
In this case, if snprintf would have written more characters than what the buffer size (SIZE) is, then size will end up larger than SIZE. In later uses of snprintf, SIZE - size will result in a negative number, leading to problems. Note that size might already be too large by using size = snprintf before the code reaches a case of size += snprintf.2) If size is ultimately used as a length parameter for a copy back to user space, then it will potentially allow for a buffer overflow and information disclosure when size is greater than SIZE. When the size is used to index the buffer directly, we can have memory corruption. This also means when size = snprintf... is used, it may also cause problems since size may become large. Copying to userspace is mitigated by the
HARDENED_USERCOPYkernel configuration.The solution to these issues is to use scnprintf which returns the number of characters actually written to the buffer, so the size variable will never exceed SIZE.
Quoted 9 lines
Signed-off-by Silvio Cesare <[email protected]>Cc Pierre-Louis Bossart <[email protected]>Cc Liam Girdwood <[email protected]>Cc Jie Yang <[email protected]>Cc Dan Carpenter <[email protected]>Cc Kees Cook <[email protected]>Cc Will Deacon <[email protected]>Cc Greg KH <[email protected]>Signed-off-by Willy Tarreau <[email protected]>
This should get a Cc: stable, IMO.
-Kees
Quoted 114 lines
--- sound/soc/intel/skylake/skl-debug.c | 28 ++++++++++++++-------------- 1 file changed, 14 insertions(+), 14 deletions(-)sound/soc/intel/skylake/skl-debug.c +14
-15@@ -43,7 +43,7 @@ static ssize_t skl_print_pins(struct skl_module_pin *m_pin, char *buf,ssize_t ret =0 ;for (i =0 ; i < max_pin; i++) - ret += snprintf(buf + size, MOD_BUF - size, + ret += scnprintf(buf + size, MOD_BUF - size, "%s %d\n\tModule %d\n\tInstance %d\n\t" "In-used %s\n\tType %s\n" "\tState %d\n\tIndex %d\n",@@ -59,7 +59,7 @@ static ssize_t skl_print_pins(struct skl_module_pin *m_pin, char *buf,static ssize_t skl_print_fmt (struct skl_module_fmt *fmt,char *buf,ssize_t size,bool direction) { - return snprintf(buf + size, MOD_BUF - size, + return scnprintf(buf + size, MOD_BUF - size, "%s\n\tCh %d\n\tFreq %d\n\tBit depth %d\n\t" "Valid bit depth %d\n\tCh config %#x\n\tInterleaving %d\n\t" "Sample Type %d\n\tCh Map %#x\n",@@ -81,16 +81,16 @@ static ssize_t module_read(struct file *file, char __user *user_buf,if (!buf)return -ENOMEM ; - ret =snprintf (buf,MOD_BUF ,"Module:\n\tUUID %pUL\n\tModule id %d\n" + ret =scnprintf (buf,MOD_BUF ,"Module:\n\tUUID %pUL\n\tModule id %d\n" "\tInstance id %d\n\tPvt_id %d\n" , mconfig->guid, mconfig->id.module_id, mconfig->id.instance_id, mconfig->id.pvt_id); - ret +=snprintf (buf + ret,MOD_BUF - ret, + ret +=scnprintf (buf + ret,MOD_BUF - ret,"Resources:\n\tMCPS %#x\n\tIBS %#x\n\tOBS %#x\t\n" , mconfig->mcps, mconfig->ibs, mconfig->obs); - ret += snprintf(buf + ret, MOD_BUF - ret, + ret += scnprintf(buf + ret, MOD_BUF - ret, "Module data:\n\tCore %d\n\tIn queue %d\n\t" "Out queue %d\n\tType %s\n", mconfig->core_id, mconfig->max_in_queue,@@ -100,38 +100,38 @@ static ssize_t module_read(struct file *file, char __user *user_buf, ret +=skl_print_fmt (mconfig->in_fmt, buf, ret, true); ret +=skl_print_fmt (mconfig->out_fmt, buf, ret, false); - ret +=snprintf (buf + ret,MOD_BUF - ret, + ret +=scnprintf (buf + ret,MOD_BUF - ret,"Fixup:\n\tParams %#x\n\tConverter %#x\n" , mconfig->params_fixup, mconfig->converter); - ret +=snprintf (buf + ret,MOD_BUF - ret, + ret +=scnprintf (buf + ret,MOD_BUF - ret,"Module Gateway:\n\tType %#x\n\tVbus %#x\n\tHW conn %#x\n\tSlot %#x\n" , mconfig->dev_type, mconfig->vbus_id, mconfig->hw_conn_type, mconfig->time_slot); - ret +=snprintf (buf + ret,MOD_BUF - ret, + ret +=scnprintf (buf + ret,MOD_BUF - ret,"Pipeline:\n\tID %d\n\tPriority %d\n\tConn Type %d\n\t" "Pages %#x\n" , mconfig->pipe->ppl_id, mconfig->pipe->pipe_priority, mconfig->pipe->conn_type, mconfig->pipe->memory_pages); - ret +=snprintf (buf + ret,MOD_BUF - ret, + ret +=scnprintf (buf + ret,MOD_BUF - ret,"\tParams:\n\t\tHost DMA %d\n\t\tLink DMA %d\n" , mconfig->pipe->p_params->host_dma_id, mconfig->pipe->p_params->link_dma_id); - ret +=snprintf (buf + ret,MOD_BUF - ret, + ret +=scnprintf (buf + ret,MOD_BUF - ret,"\tPCM params:\n\t\tCh %d\n\t\tFreq %d\n\t\tFormat %d\n" , mconfig->pipe->p_params->ch, mconfig->pipe->p_params->s_freq, mconfig->pipe->p_params->s_fmt); - ret +=snprintf (buf + ret,MOD_BUF - ret, + ret +=scnprintf (buf + ret,MOD_BUF - ret,"\tLink %#x\n\tStream %#x\n" , mconfig->pipe->p_params->linktype, mconfig->pipe->p_params->stream); - ret +=snprintf (buf + ret,MOD_BUF - ret, + ret +=scnprintf (buf + ret,MOD_BUF - ret,"\tState %d\n\tPassthru %s\n" , mconfig->pipe->state, mconfig->pipe->passthru ?"true" :"false" );@@ -141,7 +141,7 @@ static ssize_t module_read(struct file *file, char __user *user_buf, ret +=skl_print_pins (mconfig->m_out_pin, buf, mconfig->max_out_queue, ret, false); - ret +=snprintf (buf + ret,MOD_BUF - ret, + ret +=scnprintf (buf + ret,MOD_BUF - ret,"Other:\n\tDomain %d\n\tHomogeneous Input %s\n\t" "Homogeneous Output %s\n\tIn Queue Mask %d\n\t" "Out Queue Mask %d\n\tDMA ID %d\n\tMem Pages %d\n\t"@@ -199,7 +199,7 @@ static ssize_t fw_softreg_read(struct file *file, char __user *user_buf,__iowrite32_copy (d->fw_read_buff, fw_reg_addr, w0_stat_sz >>2 );for (offset =0 ; offset <FW_REG_SIZE ; offset +=16 ) { - ret +=snprintf (tmp + ret,FW_REG_BUF - ret,"%#.4x: " , offset); + ret +=scnprintf (tmp + ret,FW_REG_BUF - ret,"%#.4x: " , offset);hex_dump_to_buffer (d->fw_read_buff + offset,16 ,16 ,4 , tmp + ret,FW_REG_BUF - ret,0 ); ret +=strlen (tmp + ret); --2.19.2
Signature · 1 line
Kees Cook
Re: [PATCH 6/8] ASoC: intel: skylake: change snprintf to scnprintf for possible overflow
In reply to Willy TarreauQuoted 45 lines · Willy Tarreau
From: Silvio Cesare <[email protected]>
Change snprintf to scnprintf. There are generally two cases where using snprintf causes problems.
1) Uses of size +=
snprintf(buf, SIZE - size, fmt, ...)
In this case, if snprintf would have written more characters than what the buffer size (SIZE) is, then size will end up larger than SIZE. In later uses of snprintf, SIZE - size will result in a negative number, leading to problems. Note that size might already be too large by using size = snprintf before the code reaches a case of size += snprintf.2) If size is ultimately used as a length parameter for a copy back to user space, then it will potentially allow for a buffer overflow and information disclosure when size is greater than SIZE. When the size is used to index the buffer directly, we can have memory corruption. This also means when size = snprintf... is used, it may also cause problems since size may become large. Copying to userspace is mitigated by the
HARDENED_USERCOPYkernel configuration.The solution to these issues is to use scnprintf which returns the number of characters actually written to the buffer, so the size variable will never exceed SIZE.
Signed-off-by Silvio Cesare <[email protected]>Cc Pierre-Louis Bossart <[email protected]>Cc Liam Girdwood <[email protected]>Cc Jie Yang <[email protected]>Cc Dan Carpenter <[email protected]>Cc Kees Cook <[email protected]>Cc Will Deacon <[email protected]>Cc Greg KH <[email protected]>Signed-off-by Willy Tarreau <[email protected]>--- sound/soc/intel/skylake/skl-debug.c | 28 ++++++++++++++-------------- 1 file changed, 14 insertions(+), 14 deletions(-)sound/soc/intel/skylake/skl-debug.c +0
-0
sound/soc/intel/skylake/skl-debug.c static ssize_t skl_print_pins(struct skl_module_pin *m_pin, char *buf, · line 49
Quoted 8 lines
sound/soc/intel/skylake/skl-debug.c +1
-1@@ -43,7 +43,7 @@ static ssize_t skl_print_pins(struct skl_module_pin *m_pin, char *buf,ssize_t ret =0 ;for (i =0 ; i < max_pin; i++) - ret += snprintf(buf + size, MOD_BUF - size, + ret += scnprintf(buf + size, MOD_BUF - size, "%s %d\n\tModule %d\n\tInstance %d\n\t" "In-used %s\n\tType %s\n" "\tState %d\n\tIndex %d\n",
While working on a Coccinelle script to find more cases of this, I noticed that this code is buggy: it keeps overwriting the same position in the buf string: "buf + size" and don't take "ret" into account at all. This needs to be:
ret += scnprintf(buf + size + ret, MOD_BUF - size - ret,
Signature · 1 line
Kees Cook
Re: [PATCH 6/8] ASoC: intel: skylake: change snprintf to scnprintf for possible overflow
Quoted 20 lines
Quoted 7 lines
sound/soc/intel/skylake/skl-debug.c +0
-0sound/soc/intel/skylake/skl-debug.c static ssize_t skl_print_pins(struct skl_module_pin *m_pin, char *buf, · line 49
Quoted 8 lines
sound/soc/intel/skylake/skl-debug.c +1
-1@@ -43,7 +43,7 @@ static ssize_t skl_print_pins(struct skl_module_pin *m_pin, char *buf,ssize_t ret =0 ;for (i =0 ; i < max_pin; i++) - ret += snprintf(buf + size, MOD_BUF - size, + ret += scnprintf(buf + size, MOD_BUF - size, "%s %d\n\tModule %d\n\tInstance %d\n\t" "In-used %s\n\tType %s\n" "\tState %d\n\tIndex %d\n",While working on a Coccinelle script to find more cases of this, I noticed that this code is buggy: it keeps overwriting the same position in the buf string: "buf + size" and don't take "ret" into account at all. This needs to be:
Quoted 1 line
ret += scnprintf(buf + size + ret,
MOD_BUF- size - ret,
Thanks for the sighting. Indeed this looks like a bug, all other calls to snprintf use "ret" to modify the destination/length.
The only explanation I have for it not being noticed earlier is that it's possibly not used - a 5mn test on 2 machines show the loop is actually not run (max_pin == 0).
It'll take me a bit of time to figure out what exactly this routine is supposed to do, maybe we should do the cross-tree change first?
-Pierre
Re: [PATCH 6/8] ASoC: intel: skylake: change snprintf to scnprintf for possible overflow
Quoted 26 lines · Pierre-Louis Bossart
Quoted 21 lines
Quoted 8 lines
sound/soc/intel/skylake/skl-debug.c +0
-0sound/soc/intel/skylake/skl-debug.c static ssize_t skl_print_pins(struct skl_module_pin *m_pin, char *buf, · line 49
Quoted 8 lines
sound/soc/intel/skylake/skl-debug.c +1
-1@@ -43,7 +43,7 @@ static ssize_t skl_print_pins(struct skl_module_pin *m_pin, char *buf,ssize_t ret =0 ;for (i =0 ; i < max_pin; i++) - ret += snprintf(buf + size, MOD_BUF - size, + ret += scnprintf(buf + size, MOD_BUF - size, "%s %d\n\tModule %d\n\tInstance %d\n\t" "In-used %s\n\tType %s\n" "\tState %d\n\tIndex %d\n",While working on a Coccinelle script to find more cases of this, I noticed that this code is buggy: it keeps overwriting the same position in the buf string: "buf + size" and don't take "ret" into account at all. This needs to be:
Quoted 1 line
ret += scnprintf(buf + size + ret,
MOD_BUF- size - ret,Thanks for the sighting. Indeed this looks like a bug, all other calls to snprintf use "ret" to modify the destination/length.
Quoted 6 lines
The only explanation I have for it not being noticed earlier is that it's possibly not used - a 5mn test on 2 machines show the loop is actually not run (
max_pin== 0).It'll take me a bit of time to figure out what exactly this routine is supposed to do, maybe we should do the cross-tree change first?
Sounds good to me. These patches are direct at maintainers, so please apply at will. :)
Thanks!
Signature · 1 line
Kees Cook
PATCH 7/8 ASoC: dapm: change snprintf to scnprintf for possible overflow
In reply to Willy TarreauFrom: Silvio Cesare <[email protected]>
Change snprintf to scnprintf. There are generally two cases where using snprintf causes problems.
1) Uses of size += snprintf(buf, SIZE - size, fmt, ...)
In this case, if snprintf would have written more characters than what the buffer size (SIZE) is, then size will end up larger than SIZE. In later uses of snprintf, SIZE - size will result in a negative number, leading to problems. Note that size might already be too large by using size = snprintf before the code reaches a case of size += snprintf.
2) If size is ultimately used as a length parameter for a copy back to user space, then it will potentially allow for a buffer overflow and information disclosure when size is greater than SIZE. When the size is used to index the buffer directly, we can have memory corruption. This also means when size = snprintf... is used, it may also cause problems since size may become large. Copying to userspace is mitigated by the HARDENED_USERCOPY kernel configuration.
The solution to these issues is to use scnprintf which returns the number of characters actually written to the buffer, so the size variable will never exceed SIZE.
--- sound/soc/soc-dapm.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)
sound/soc/soc-dapm.c +5 -5
@@ -2019,19 +2019,19 @@ static ssize_t dapm_widget_power_read_file(struct file *file, out =is_connected_output_ep (w,NULL ,NULL ); } - ret =snprintf (buf,PAGE_SIZE ,"%s: %s%s in %d out %d" , + ret =scnprintf (buf,PAGE_SIZE ,"%s: %s%s in %d out %d" , w->name, w->power ?"On" :"Off" , w->force ?" (forced)" :"" , in, out);if (w->reg >=0 ) - ret +=snprintf (buf + ret,PAGE_SIZE - ret, + ret +=scnprintf (buf + ret,PAGE_SIZE - ret," - R%d(0x%x) mask 0x%x" , w->reg, w->reg, w->mask << w->shift); - ret +=snprintf (buf + ret,PAGE_SIZE - ret,"\n" ); + ret +=scnprintf (buf + ret,PAGE_SIZE - ret,"\n" );if (w->sname) - ret +=snprintf (buf + ret,PAGE_SIZE - ret," stream %s %s\n" , + ret +=scnprintf (buf + ret,PAGE_SIZE - ret," stream %s %s\n" , w->sname, w->active ?"active" :"inactive" );
@@ -2044,7 +2044,7 @@ static ssize_t dapm_widget_power_read_file(struct file *file,if (!p->connect)continue ; - ret += snprintf(buf + ret, PAGE_SIZE - ret, + ret += scnprintf(buf + ret, PAGE_SIZE - ret, " %s \"%s\" \"%s\"\n", (rdir == SND_SOC_DAPM_DIR_IN) ? "in" : "out", p->name ? p->name : "static",
Signature · 1 line
2.19.2
Mark Brown
maintainerRe: [PATCH 7/8] ASoC: dapm: change snprintf to scnprintf for possible overflow
Quoted 4 lines · Willy Tarreau
From: Silvio Cesare <[email protected]>
Change snprintf to scnprintf. There are generally two cases where using snprintf causes problems.
I don't have a cover letter or anything before this in the series. What's going on with dependencies here?
Re: [PATCH 7/8] ASoC: dapm: change snprintf to scnprintf for possible overflow
Hi Mark,
Quoted 8 lines · Mark Brown
Quoted 4 lines · Willy Tarreau
From: Silvio Cesare <[email protected]>
Change snprintf to scnprintf. There are generally two cases where using snprintf causes problems.
I don't have a cover letter or anything before this in the series. What's going on with dependencies here?
Sorry for the lack of more context, I was just involved in putting a subject line on each patch and passing them through get_maintainers.pl. These ones were sent to the security list after this article was published:
http://blog.infosectcbr.com.au/2018/11/memory-bugs-in-multiple-linux-kernel.html
Thanks,
Willy
Mark Brown
maintainerRe: [PATCH 7/8] ASoC: dapm: change snprintf to scnprintf for possible overflow
Quoted 11 lines · Willy Tarreau
Quoted 4 lines · Mark Brown
On Sat, Jan 12, 2019 at 04:28:43PM +0100, Willy Tarreau wrote:
I don't have a cover letter or anything before this in the series. What's going on with dependencies here?
Sorry for the lack of more context, I was just involved in putting a subject line on each patch and passing them through get_maintainers.pl. These ones were sent to the security list after this article was published:
http://blog.infosectcbr.com.au/2018/11/memory-bugs-in-multiple-linux-kernel.html
So just to confirm it looks like these are just isolated projects with no interdepencies?
Re: [PATCH 7/8] ASoC: dapm: change snprintf to scnprintf for possible overflow
Quoted 7 lines · Mark Brown
Quoted 5 lines · Willy Tarreau
Quoted 4 lines · Mark Brown
On Sat, Jan 12, 2019 at 04:28:43PM +0100, Willy Tarreau wrote:
I don't have a cover letter or anything before this in the series. What's going on with dependencies here?
Quoted 8 lines
Quoted 5 lines
Sorry for the lack of more context, I was just involved in putting a subject line on each patch and passing them through get_maintainers.pl. These ones were sent to the security list after this article was published:
http://blog.infosectcbr.com.au/2018/11/memory-bugs-in-multiple-linux-kernel.html
So just to confirm it looks like these are just isolated projects with no interdepencies?
That's it : just a series of patches for the same bug in multiple drivers. Now with your question I understand the confusion, it's caused by me sending all of them as a single series. I should have sent them individually. My bad.
Regards,
Willy
PATCH 8/8 spi: dw: change snprintf to scnprintf for possible overflow
In reply to Willy TarreauFrom: Silvio Cesare <[email protected]>
Change snprintf to scnprintf. There are generally two cases where using snprintf causes problems.
1) Uses of size += snprintf(buf, SIZE - size, fmt, ...)
In this case, if snprintf would have written more characters than what the buffer size (SIZE) is, then size will end up larger than SIZE. In later uses of snprintf, SIZE - size will result in a negative number, leading to problems. Note that size might already be too large by using size = snprintf before the code reaches a case of size += snprintf.
2) If size is ultimately used as a length parameter for a copy back to user space, then it will potentially allow for a buffer overflow and information disclosure when size is greater than SIZE. When the size is used to index the buffer directly, we can have memory corruption. This also means when size = snprintf... is used, it may also cause problems since size may become large. Copying to userspace is mitigated by the HARDENED_USERCOPY kernel configuration.
The solution to these issues is to use scnprintf which returns the number of characters actually written to the buffer, so the size variable will never exceed SIZE.
--- drivers/spi/spi-dw.c | 36 ++++++++++++++++++------------------ 1 file changed, 18 insertions(+), 18 deletions(-)
drivers/spi/spi-dw.c +18 -18
@@ -54,41 +54,41 @@ static ssize_t dw_spi_show_regs(struct file *file, char __user *user_buf,if (!buf)return 0 ; - len +=snprintf (buf + len,SPI_REGS_BUFSIZE - len, + len +=scnprintf (buf + len,SPI_REGS_BUFSIZE - len,"%s registers:\n" ,dev_name (&dws->master->dev)); - len +=snprintf (buf + len,SPI_REGS_BUFSIZE - len, + len +=scnprintf (buf + len,SPI_REGS_BUFSIZE - len,"=================================\n" ); - len +=snprintf (buf + len,SPI_REGS_BUFSIZE - len, + len +=scnprintf (buf + len,SPI_REGS_BUFSIZE - len,"CTRL0: \t\t0x%08x\n" ,dw_readl (dws,DW_SPI_CTRL0 )); - len +=snprintf (buf + len,SPI_REGS_BUFSIZE - len, + len +=scnprintf (buf + len,SPI_REGS_BUFSIZE - len,"CTRL1: \t\t0x%08x\n" ,dw_readl (dws,DW_SPI_CTRL1 )); - len +=snprintf (buf + len,SPI_REGS_BUFSIZE - len, + len +=scnprintf (buf + len,SPI_REGS_BUFSIZE - len,"SSIENR: \t0x%08x\n" ,dw_readl (dws,DW_SPI_SSIENR )); - len +=snprintf (buf + len,SPI_REGS_BUFSIZE - len, + len +=scnprintf (buf + len,SPI_REGS_BUFSIZE - len,"SER: \t\t0x%08x\n" ,dw_readl (dws,DW_SPI_SER )); - len +=snprintf (buf + len,SPI_REGS_BUFSIZE - len, + len +=scnprintf (buf + len,SPI_REGS_BUFSIZE - len,"BAUDR: \t\t0x%08x\n" ,dw_readl (dws,DW_SPI_BAUDR )); - len +=snprintf (buf + len,SPI_REGS_BUFSIZE - len, + len +=scnprintf (buf + len,SPI_REGS_BUFSIZE - len,"TXFTLR: \t0x%08x\n" ,dw_readl (dws,DW_SPI_TXFLTR )); - len +=snprintf (buf + len,SPI_REGS_BUFSIZE - len, + len +=scnprintf (buf + len,SPI_REGS_BUFSIZE - len,"RXFTLR: \t0x%08x\n" ,dw_readl (dws,DW_SPI_RXFLTR )); - len +=snprintf (buf + len,SPI_REGS_BUFSIZE - len, + len +=scnprintf (buf + len,SPI_REGS_BUFSIZE - len,"TXFLR: \t\t0x%08x\n" ,dw_readl (dws,DW_SPI_TXFLR )); - len +=snprintf (buf + len,SPI_REGS_BUFSIZE - len, + len +=scnprintf (buf + len,SPI_REGS_BUFSIZE - len,"RXFLR: \t\t0x%08x\n" ,dw_readl (dws,DW_SPI_RXFLR )); - len +=snprintf (buf + len,SPI_REGS_BUFSIZE - len, + len +=scnprintf (buf + len,SPI_REGS_BUFSIZE - len,"SR: \t\t0x%08x\n" ,dw_readl (dws,DW_SPI_SR )); - len +=snprintf (buf + len,SPI_REGS_BUFSIZE - len, + len +=scnprintf (buf + len,SPI_REGS_BUFSIZE - len,"IMR: \t\t0x%08x\n" ,dw_readl (dws,DW_SPI_IMR )); - len +=snprintf (buf + len,SPI_REGS_BUFSIZE - len, + len +=scnprintf (buf + len,SPI_REGS_BUFSIZE - len,"ISR: \t\t0x%08x\n" ,dw_readl (dws,DW_SPI_ISR )); - len +=snprintf (buf + len,SPI_REGS_BUFSIZE - len, + len +=scnprintf (buf + len,SPI_REGS_BUFSIZE - len,"DMACR: \t\t0x%08x\n" ,dw_readl (dws,DW_SPI_DMACR )); - len +=snprintf (buf + len,SPI_REGS_BUFSIZE - len, + len +=scnprintf (buf + len,SPI_REGS_BUFSIZE - len,"DMATDLR: \t0x%08x\n" ,dw_readl (dws,DW_SPI_DMATDLR )); - len +=snprintf (buf + len,SPI_REGS_BUFSIZE - len, + len +=scnprintf (buf + len,SPI_REGS_BUFSIZE - len,"DMARDLR: \t0x%08x\n" ,dw_readl (dws,DW_SPI_DMARDLR )); - len +=snprintf (buf + len,SPI_REGS_BUFSIZE - len, + len +=scnprintf (buf + len,SPI_REGS_BUFSIZE - len,"=================================\n" ); ret =simple_read_from_buffer (user_buf, count, ppos, buf, len);
Signature · 1 line
2.19.2
Re: [PATCH 8/8] spi: dw: change snprintf to scnprintf for possible overflow
Quoted 25 lines · Willy Tarreau
From: Silvio Cesare <[email protected]>
Change snprintf to scnprintf. There are generally two cases where using snprintf causes problems.
1) Uses of size +=
snprintf(buf, SIZE - size, fmt, ...)
In this case, if snprintf would have written more characters than what the buffer size (SIZE) is, then size will end up larger than SIZE. In later uses of snprintf, SIZE - size will result in a negative number, leading to problems. Note that size might already be too large by using size = snprintf before the code reaches a case of size += snprintf.2) If size is ultimately used as a length parameter for a copy back to user space, then it will potentially allow for a buffer overflow and information disclosure when size is greater than SIZE. When the size is used to index the buffer directly, we can have memory corruption. This also means when size = snprintf... is used, it may also cause problems since size may become large. Copying to userspace is mitigated by the
HARDENED_USERCOPYkernel configuration.The solution to these issues is to use scnprintf which returns the number of characters actually written to the buffer, so the size variable will never exceed SIZE.
Quoted 7 lines
Signed-off-by Silvio Cesare <[email protected]>Cc Mark Brown <[email protected]>Cc Dan Carpenter <[email protected]>Cc Kees Cook <[email protected]>Cc Will Deacon <[email protected]>Cc Greg KH <[email protected]>Signed-off-by Willy Tarreau <[email protected]>
-Kees
Quoted 72 lines
--- drivers/spi/spi-dw.c | 36 ++++++++++++++++++------------------ 1 file changed, 18 insertions(+), 18 deletions(-)drivers/spi/spi-dw.c +18
-19@@ -54,41 +54,41 @@ static ssize_t dw_spi_show_regs(struct file *file, char __user *user_buf,if (!buf)return 0 ; - len +=snprintf (buf + len,SPI_REGS_BUFSIZE - len, + len +=scnprintf (buf + len,SPI_REGS_BUFSIZE - len,"%s registers:\n" ,dev_name (&dws->master->dev)); - len +=snprintf (buf + len,SPI_REGS_BUFSIZE - len, + len +=scnprintf (buf + len,SPI_REGS_BUFSIZE - len,"=================================\n" ); - len +=snprintf (buf + len,SPI_REGS_BUFSIZE - len, + len +=scnprintf (buf + len,SPI_REGS_BUFSIZE - len,"CTRL0: \t\t0x%08x\n" ,dw_readl (dws,DW_SPI_CTRL0 )); - len +=snprintf (buf + len,SPI_REGS_BUFSIZE - len, + len +=scnprintf (buf + len,SPI_REGS_BUFSIZE - len,"CTRL1: \t\t0x%08x\n" ,dw_readl (dws,DW_SPI_CTRL1 )); - len +=snprintf (buf + len,SPI_REGS_BUFSIZE - len, + len +=scnprintf (buf + len,SPI_REGS_BUFSIZE - len,"SSIENR: \t0x%08x\n" ,dw_readl (dws,DW_SPI_SSIENR )); - len +=snprintf (buf + len,SPI_REGS_BUFSIZE - len, + len +=scnprintf (buf + len,SPI_REGS_BUFSIZE - len,"SER: \t\t0x%08x\n" ,dw_readl (dws,DW_SPI_SER )); - len +=snprintf (buf + len,SPI_REGS_BUFSIZE - len, + len +=scnprintf (buf + len,SPI_REGS_BUFSIZE - len,"BAUDR: \t\t0x%08x\n" ,dw_readl (dws,DW_SPI_BAUDR )); - len +=snprintf (buf + len,SPI_REGS_BUFSIZE - len, + len +=scnprintf (buf + len,SPI_REGS_BUFSIZE - len,"TXFTLR: \t0x%08x\n" ,dw_readl (dws,DW_SPI_TXFLTR )); - len +=snprintf (buf + len,SPI_REGS_BUFSIZE - len, + len +=scnprintf (buf + len,SPI_REGS_BUFSIZE - len,"RXFTLR: \t0x%08x\n" ,dw_readl (dws,DW_SPI_RXFLTR )); - len +=snprintf (buf + len,SPI_REGS_BUFSIZE - len, + len +=scnprintf (buf + len,SPI_REGS_BUFSIZE - len,"TXFLR: \t\t0x%08x\n" ,dw_readl (dws,DW_SPI_TXFLR )); - len +=snprintf (buf + len,SPI_REGS_BUFSIZE - len, + len +=scnprintf (buf + len,SPI_REGS_BUFSIZE - len,"RXFLR: \t\t0x%08x\n" ,dw_readl (dws,DW_SPI_RXFLR )); - len +=snprintf (buf + len,SPI_REGS_BUFSIZE - len, + len +=scnprintf (buf + len,SPI_REGS_BUFSIZE - len,"SR: \t\t0x%08x\n" ,dw_readl (dws,DW_SPI_SR )); - len +=snprintf (buf + len,SPI_REGS_BUFSIZE - len, + len +=scnprintf (buf + len,SPI_REGS_BUFSIZE - len,"IMR: \t\t0x%08x\n" ,dw_readl (dws,DW_SPI_IMR )); - len +=snprintf (buf + len,SPI_REGS_BUFSIZE - len, + len +=scnprintf (buf + len,SPI_REGS_BUFSIZE - len,"ISR: \t\t0x%08x\n" ,dw_readl (dws,DW_SPI_ISR )); - len +=snprintf (buf + len,SPI_REGS_BUFSIZE - len, + len +=scnprintf (buf + len,SPI_REGS_BUFSIZE - len,"DMACR: \t\t0x%08x\n" ,dw_readl (dws,DW_SPI_DMACR )); - len +=snprintf (buf + len,SPI_REGS_BUFSIZE - len, + len +=scnprintf (buf + len,SPI_REGS_BUFSIZE - len,"DMATDLR: \t0x%08x\n" ,dw_readl (dws,DW_SPI_DMATDLR )); - len +=snprintf (buf + len,SPI_REGS_BUFSIZE - len, + len +=scnprintf (buf + len,SPI_REGS_BUFSIZE - len,"DMARDLR: \t0x%08x\n" ,dw_readl (dws,DW_SPI_DMARDLR )); - len +=snprintf (buf + len,SPI_REGS_BUFSIZE - len, + len +=scnprintf (buf + len,SPI_REGS_BUFSIZE - len,"=================================\n" ); ret =simple_read_from_buffer (user_buf, count, ppos, buf, len); --2.19.2
Signature · 1 line
Kees Cook
Quoted 5 lines · Willy Tarreau
From: Silvio Cesare <[email protected]>
Change snprintf to scnprintf. There are generally two cases where using snprintf causes problems.
(I didn't find a 0/8 cover letter, so I'm replying here...)
Many of these fixes are just robustness updates (e.g. the lkdtm case below is not current a problem: the size of the static array getting displayed is less than PAGE_SIZE). It might be worth noting which are actually problems (and include the appropriate Cc: and Fixes: lines).
Quoted 20 lines
1) Uses of size +=
snprintf(buf, SIZE - size, fmt, ...)
In this case, if snprintf would have written more characters than what the buffer size (SIZE) is, then size will end up larger than SIZE. In later uses of snprintf, SIZE - size will result in a negative number, leading to problems. Note that size might already be too large by using size = snprintf before the code reaches a case of size += snprintf.2) If size is ultimately used as a length parameter for a copy back to user space, then it will potentially allow for a buffer overflow and information disclosure when size is greater than SIZE. When the size is used to index the buffer directly, we can have memory corruption. This also means when size = snprintf... is used, it may also cause problems since size may become large. Copying to userspace is mitigated by the
HARDENED_USERCOPYkernel configuration.The solution to these issues is to use scnprintf which returns the number of characters actually written to the buffer, so the size variable will never exceed SIZE.
Quoted 6 lines
Signed-off-by Silvio Cesare <[email protected]>Cc Dan Carpenter <[email protected]>Cc Kees Cook <[email protected]>Cc Will Deacon <[email protected]>Cc Greg KH <[email protected]>Signed-off-by Willy Tarreau <[email protected]>
Are these changes going into someone's single tree, or are they intended for individual maintainers to pick up?
-Kees
Quoted 24 lines
--- drivers/misc/lkdtm/core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)drivers/misc/lkdtm/core.c +2
-3@@ -347,9 +347,9 @@ static ssize_t lkdtm_debugfs_read(struct file *f, char __user *user_buf,if (buf ==NULL )return -ENOMEM ; - n =snprintf (buf,PAGE_SIZE ,"Available crash types:\n" ); + n =scnprintf (buf,PAGE_SIZE ,"Available crash types:\n" );for (i =0 ; i <ARRAY_SIZE (crashtypes); i++) { - n +=snprintf (buf + n,PAGE_SIZE - n,"%s\n" , + n +=scnprintf (buf + n,PAGE_SIZE - n,"%s\n" , crashtypes[i].name); } buf[n] ='\0' ; --2.19.2
Signature · 1 line
Kees Cook
Quoted 6 lines · Kees Cook
Quoted 3 lines · Willy Tarreau
From: Silvio Cesare <[email protected]>
Change snprintf to scnprintf. There are generally two cases where using snprintf causes problems.(I didn't find a 0/8 cover letter, so I'm replying here...)
I forgot to mention: can we please get a Coccinelle rule added to catch these cases in the future? (And make sure sfr is running it? :) )
My attempt at it was:
@@
expression LEN, BUF, SIZE;
identifier FUNC;
@@
LEN += snprintf(BUF + LEN, SIZE - LEN, ...);
... when != LEN > SIZE
when != LEN >= SIZE
* FUNC(..., LEN, ...)
But this needs adjustment to deal with some false positives (like using min()).
--
Kees Cook
Hi Kees,
Quoted 8 lines · Kees Cook
Quoted 5 lines · Willy Tarreau
From: Silvio Cesare <[email protected]>
Change snprintf to scnprintf. There are generally two cases where using snprintf causes problems.
(I didn't find a 0/8 cover letter, so I'm replying here...)
I didn't add one simply because I didn't have more context info than the one already present in each of these commits (which were all the same by the way). These ones were first reported by Silvio on the security list on November 23rd and came to a stall by lack of proper Cc and subject lines. So I've ran get_maintainers.pl + git log to adjust all this and sent them with the available context.
Quoted 4 lines
Many of these fixes are just robustness updates (e.g. the lkdtm case below is not current a problem: the size of the static array getting displayed is less than
PAGE_SIZE). It might be worth noting which are actually problems (and include the appropriate Cc: and Fixes: lines).
From what I remember from the thread, these are small bugs causing some memory disclosure when used with debugfs. I've just found the featured article :
http://blog.infosectcbr.com.au/2018/11/memory-bugs-in-multiple-linux-kernel.html
Quoted 2 lines
Are these changes going into someone's single tree, or are they intended for individual maintainers to pick up?
The goal was to let the maintainers decide based on the commit message.
That's why it's always better when the reporter sends the information by himself rather than relying on some third party to polish things up and forward :-/
Cheers,
Willy
Quoted 25 lines · Willy Tarreau
From: Silvio Cesare <[email protected]>
Change snprintf to scnprintf. There are generally two cases where using snprintf causes problems.
1) Uses of size +=
snprintf(buf, SIZE - size, fmt, ...)
In this case, if snprintf would have written more characters than what the buffer size (SIZE) is, then size will end up larger than SIZE. In later uses of snprintf, SIZE - size will result in a negative number, leading to problems. Note that size might already be too large by using size = snprintf before the code reaches a case of size += snprintf.2) If size is ultimately used as a length parameter for a copy back to user space, then it will potentially allow for a buffer overflow and information disclosure when size is greater than SIZE. When the size is used to index the buffer directly, we can have memory corruption. This also means when size = snprintf... is used, it may also cause problems since size may become large. Copying to userspace is mitigated by the
HARDENED_USERCOPYkernel configuration.The solution to these issues is to use scnprintf which returns the number of characters actually written to the buffer, so the size variable will never exceed SIZE.
Quoted 6 lines
Signed-off-by Silvio Cesare <[email protected]>Cc Dan Carpenter <[email protected]>Cc Kees Cook <[email protected]>Cc Will Deacon <[email protected]>Cc Greg KH <[email protected]>Signed-off-by Willy Tarreau <[email protected]>
It looks like these are going via individual trees. Greg, can you please take this into your drivers-misc tree for lkdtm?
Thanks!
-Kees
Quoted 24 lines
--- drivers/misc/lkdtm/core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)drivers/misc/lkdtm/core.c +2
-3@@ -347,9 +347,9 @@ static ssize_t lkdtm_debugfs_read(struct file *f, char __user *user_buf,if (buf ==NULL )return -ENOMEM ; - n =snprintf (buf,PAGE_SIZE ,"Available crash types:\n" ); + n =scnprintf (buf,PAGE_SIZE ,"Available crash types:\n" );for (i =0 ; i <ARRAY_SIZE (crashtypes); i++) { - n +=snprintf (buf + n,PAGE_SIZE - n,"%s\n" , + n +=scnprintf (buf + n,PAGE_SIZE - n,"%s\n" , crashtypes[i].name); } buf[n] ='\0' ; --2.19.2
Signature · 1 line
Kees Cook
Quoted 33 lines · Kees Cook
Quoted 25 lines · Willy Tarreau
From: Silvio Cesare <[email protected]>
Change snprintf to scnprintf. There are generally two cases where using snprintf causes problems.
1) Uses of size +=
snprintf(buf, SIZE - size, fmt, ...)
In this case, if snprintf would have written more characters than what the buffer size (SIZE) is, then size will end up larger than SIZE. In later uses of snprintf, SIZE - size will result in a negative number, leading to problems. Note that size might already be too large by using size = snprintf before the code reaches a case of size += snprintf.2) If size is ultimately used as a length parameter for a copy back to user space, then it will potentially allow for a buffer overflow and information disclosure when size is greater than SIZE. When the size is used to index the buffer directly, we can have memory corruption. This also means when size = snprintf... is used, it may also cause problems since size may become large. Copying to userspace is mitigated by the
HARDENED_USERCOPYkernel configuration.The solution to these issues is to use scnprintf which returns the number of characters actually written to the buffer, so the size variable will never exceed SIZE.
Quoted 6 lines
Signed-off-by Silvio Cesare <[email protected]>Cc Dan Carpenter <[email protected]>Cc Kees Cook <[email protected]>Cc Will Deacon <[email protected]>Cc Greg KH <[email protected]>Signed-off-by Willy Tarreau <[email protected]>
Quoted 4 lines
It looks like these are going via individual trees. Greg, can you please take this into your drivers-misc tree for lkdtm?
Acked-by Kees Cook <[email protected]>
Will do, thanks.
greg k-h