Skip to contentSkip to conversation

Blacklist SAMSUNG MZ7TD256HAFV-000L9 SSD

PATCH RESEND Applied Diego Viola 3 participants 6 messages Nov 12, 2018

Subsystems (2)
Stable branch libata
lore
Share & tools
lore

Diego Viola

author
#0 lore raw

PATCH RESEND 1/1 Blacklist SAMSUNG MZ7TD256HAFV-000L9 SSD

med_power_with_dipm still causes freezes after updating the firmware to the latest version (DXT04L5Q).

Set model_rev to NULL and blacklist the device.

Signed-off-by Diego Viola <[email protected]>
Reviewed-by Hans de Goede <[email protected]>
---
 drivers/ata/libata-core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/ata/libata-core.c +1 -1
index 6e594644cb1d..a7f5202a4815 100644
@@ -4553,7 +4553,7 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
 	/* These specific Samsung models/firmware-revs do not handle LPM well */
 	{ "SAMSUNG MZMPC128HBFU-000MV", "CXM14M1Q", ATA_HORKAGE_NOLPM, },
 	{ "SAMSUNG SSD PM830 mSATA *",  "CXM13D1Q", ATA_HORKAGE_NOLPM, },
-	{ "SAMSUNG MZ7TD256HAFV-000L9", "DXT02L5Q", ATA_HORKAGE_NOLPM, },
+	{ "SAMSUNG MZ7TD256HAFV-000L9", NULL,       ATA_HORKAGE_NOLPM, },
 
 	/* devices that don't properly handle queued TRIM commands */
 	{ "Micron_M500IT_*",		"MU01",	ATA_HORKAGE_NO_NCQ_TRIM |
Signature · 1 line
2.19.1
Applied
#1 lore raw
Quoted 4 lines · Diego Viola

med_power_with_dipm still causes freezes after updating the firmware to the latest version (DXT04L5Q).

Set model_rev to NULL and blacklist the device.

Thanks, applied.

Signature · 1 line
Jens Axboe
author
#2 lore raw
Quoted 5 lines · Jens Axboe
Quoted 3 lines · Diego Viola

med_power_with_dipm still causes freezes after updating the firmware to the latest version (DXT04L5Q).

Quoted 7 lines
Quoted 1 line

Set model_rev to NULL and blacklist the device.

Thanks, applied.

--
Jens Axboe

Thanks.

maintainer
#3 lore raw
In reply to Diego Viola
Quoted 10 lines · Diego Viola

med_power_with_dipm still causes freezes after updating the firmware to the latest version (DXT04L5Q).

Set model_rev to NULL and blacklist the device.

Signed-off-by Diego Viola <[email protected]>
Reviewed-by Hans de Goede <[email protected]>
---
 drivers/ata/libata-core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

<formletter>

This is not the correct way to submit patches for inclusion in the stable kernel tree. Please read:
https://www.kernel.org/doc/html/latest/process/stable-kernel-rules.html
for how to do this properly.

</formletter>

#4 lore raw
Quoted 12 lines · Greg KH
Quoted 10 lines · Diego Viola

med_power_with_dipm still causes freezes after updating the firmware to the latest version (DXT04L5Q).

Set model_rev to NULL and blacklist the device.

Signed-off-by Diego Viola <[email protected]>
Reviewed-by Hans de Goede <[email protected]>
---
 drivers/ata/libata-core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
Quoted 8 lines

<formletter>

This is not the correct way to submit patches for inclusion in the stable kernel tree. Please read:
https://www.kernel.org/doc/html/latest/process/stable-kernel-rules.html
for how to do this properly.

</formletter>

Marking it stable here.

Signature · 1 line
Jens Axboe
author
#5 lore raw
In reply to Greg KH
Quoted 13 lines · Greg KH
Quoted 10 lines · Diego Viola

med_power_with_dipm still causes freezes after updating the firmware to the latest version (DXT04L5Q).

Set model_rev to NULL and blacklist the device.

Signed-off-by Diego Viola <[email protected]>
Reviewed-by Hans de Goede <[email protected]>
---
 drivers/ata/libata-core.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
Quoted 8 lines

<formletter>

This is not the correct way to submit patches for inclusion in the stable kernel tree. Please read:
https://www.kernel.org/doc/html/latest/process/stable-kernel-rules.html
for how to do this properly.

</formletter>

Sorry about that, I'll get it right next time.

Thanks,
Diego