Skip to contentSkip to conversation

pmu test bugs fix and improvements

PATCH In review Dapeng Mi 2 participants 33 messages Sep 14, 2024 – Feb 18, 2025 KVM

lore
Share & tools
lore

Dapeng Mi

author
#0 lore raw

v6 cover pmu test bugs fix and improvements

Changes:
v5 -> v6:
* limit maximum fixed counters number to MIN(pmu.nr_fixed_counters, ARRAY_SIZE(fixed_events)) to avoid out-of-bound access for fixed_events[]. If supported fixed counters number is larger than array size of fixed_events[], print message to remind to update test case. (Jim)
* limit instructions & branches events precise validation for only Intel processors. (Sandipan Das)

KUT/pmu test passes on Intel Sapphire Rapids platform.

History:
v5: https://lore.kernel.org/all/[email protected]/
v4: https://lore.kernel.org/all/[email protected]/
v3: https://lore.kernel.org/lkml/[email protected]/
v2: https://lore.kernel.org/lkml/[email protected]/
v1: https://lore.kernel.org/lkml/[email protected]/

Dapeng Mi (17):
x86: pmu: Remove blank line and redundant space
x86: pmu: Refine fixed_events[] names
x86: pmu: Fix the issue that pmu_counter_t.config crosses cache line
x86: pmu: Enlarge cnt[] length to 48 in check_counters_many()
x86: pmu: Print measured event count if test fails
x86: pmu: Fix potential out of bound access for fixed events
x86: pmu: Fix cycles event validation failure
x86: pmu: Use macro to replace hard-coded branches event index
x86: pmu: Use macro to replace hard-coded ref-cycles event index
x86: pmu: Use macro to replace hard-coded instructions event index
x86: pmu: Enable and disable PMCs in loop() asm blob
x86: pmu: Improve instruction and branches events verification
x86: pmu: Improve LLC misses event verification
x86: pmu: Adjust lower boundary of llc-misses event to 0 for legacy
CPUs
x86: pmu: Add IBPB indirect jump asm blob
x86: pmu: Adjust lower boundary of branch-misses event
x86: pmu: Optimize emulated instruction validation

Xiong Zhang (1):
x86: pmu: Remove duplicate code in pmu_init()

 lib/x86/pmu.c |   5 -
 x86/pmu.c     | 427 ++++++++++++++++++++++++++++++++++++++++----------
 2 files changed, 346 insertions(+), 86 deletions(-)

base-commit: 17f6f2fd17935eb5e564f621c71244b4a3ddeafb

Signature · 1 line
2.40.1
author
#1 lore raw

PATCH v6 1/18 x86: pmu: Remove duplicate code in pmu_init()

From: Xiong Zhang <[email protected]>

There are totally same code in pmu_init() helper, remove the duplicate code.

---
 lib/x86/pmu.c | 5 -----
 1 file changed, 5 deletions(-)
lib/x86/pmu.c +0 -5
index 0f2afd65..d06e9455 100644
@@ -16,11 +16,6 @@ void pmu_init(void)
 			pmu.fixed_counter_width = (cpuid_10.d >> 5) & 0xff;
 		}
 
-		if (pmu.version > 1) {
-			pmu.nr_fixed_counters = cpuid_10.d & 0x1f;
-			pmu.fixed_counter_width = (cpuid_10.d >> 5) & 0xff;
-		}
-
 		pmu.nr_gp_counters = (cpuid_10.a >> 8) & 0xff;
 		pmu.gp_counter_width = (cpuid_10.a >> 16) & 0xff;
 		pmu.gp_counter_mask_length = (cpuid_10.a >> 24) & 0xff;
Signature · 1 line
2.40.1
author
#2 lore raw

PATCH v6 2/18 x86: pmu: Remove blank line and redundant space

In reply to Dapeng Mi

code style changes.

---
 x86/pmu.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)
x86/pmu.c +1 -2
index ce9abbe1..865dbe67 100644
@@ -205,8 +205,7 @@ static noinline void __measure(pmu_counter_t *evt, uint64_t count)
 static bool verify_event(uint64_t count, struct pmu_event *e)
 {
 	// printf("%d <= %ld <= %d\n", e->min, count, e->max);
-	return count >= e->min  && count <= e->max;
-
+	return count >= e->min && count <= e->max;
 }
 
 static bool verify_counter(pmu_counter_t *cnt)
Signature · 1 line
2.40.1
author
#3 lore raw

PATCH v6 3/18 x86: pmu: Refine fixed_events[] names

In reply to Dapeng Mi

In SDM the fixed counter is numbered from 0 but currently the fixed_events names are numbered from 1. It would cause confusion for users. So Change the fixed_events[] names to number from 0 as well and keep identical with SDM.

---
 x86/pmu.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
x86/pmu.c +3 -3
index 865dbe67..60db8bdf 100644
@@ -45,9 +45,9 @@ struct pmu_event {
 	{"branches", 0x00c2, 1*N, 1.1*N},
 	{"branch misses", 0x00c3, 0, 0.1*N},
 }, fixed_events[] = {
-	{"fixed 1", MSR_CORE_PERF_FIXED_CTR0, 10*N, 10.2*N},
-	{"fixed 2", MSR_CORE_PERF_FIXED_CTR0 + 1, 1*N, 30*N},
-	{"fixed 3", MSR_CORE_PERF_FIXED_CTR0 + 2, 0.1*N, 30*N}
+	{"fixed 0", MSR_CORE_PERF_FIXED_CTR0, 10*N, 10.2*N},
+	{"fixed 1", MSR_CORE_PERF_FIXED_CTR0 + 1, 1*N, 30*N},
+	{"fixed 2", MSR_CORE_PERF_FIXED_CTR0 + 2, 0.1*N, 30*N}
 };
 
 char *buf;
Signature · 1 line
2.40.1
author
#4 lore raw

PATCH v6 4/18 x86: pmu: Fix the issue that pmu_counter_t.config crosses cache line

In reply to Dapeng Mi

When running pmu test on SPR, the following #GP fault is reported.

Unhandled exception 13 #GP at ip 000000000040771f
error_code=0000 rflags=00010046 cs=00000008
rax=00000000004031ad rcx=0000000000000186 rdx=0000000000000000 rbx=00000000005142f0 rbp=0000000000514260 rsi=0000000000000020 rdi=0000000000000340
r8=0000000000513a65 r9=00000000000003f8 r10=000000000000000d r11=00000000ffffffff
r12=000000000043003c r13=0000000000514450 r14=000000000000000b r15=0000000000000001 cr0=0000000080010011 cr2=0000000000000000 cr3=0000000001007000 cr4=0000000000000020 cr8=0000000000000000

        STACK: @40771f 40040e 400976 400aef 40148d 401da9 4001ad

FAIL pmu

It looks EVENTSEL0 MSR (0x186) is written a invalid value (0x4031ad) and cause a #GP.

Further investigation shows the #GP is caused by below code in __start_event().

rmsr(MSR_GP_EVENT_SELECTx(event_to_global_idx(evt)),

		  evt->config | EVNTSEL_EN);

The evt->config is correctly initialized but seems corrupted before writing to MSR.

The original pmu_counter_t layout looks as below.

typedef struct {
	uint32_t ctr;
	uint64_t config;
	uint64_t count;
	int idx;
} pmu_counter_t;

Obviously the config filed crosses two cache lines. When the two cache lines are not updated simultaneously, the config value is corrupted.

Adjust pmu_counter_t fields order and ensure config field is cache-line aligned.

---
 x86/pmu.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
x86/pmu.c +1 -1
index 60db8bdf..a0268db8 100644
@@ -21,9 +21,9 @@
 
 typedef struct {
 	uint32_t ctr;
+	uint32_t idx;
 	uint64_t config;
 	uint64_t count;
-	int idx;
 } pmu_counter_t;
 
 struct pmu_event {
Signature · 1 line
2.40.1
#5 lore raw

Re: [kvm-unit-tests patch v6 04/18] x86: pmu: Fix the issue that pmu_counter_t.config crosses cache line

Quoted 10 lines · Dapeng Mi

When running pmu test on SPR, the following #GP fault is reported.

Unhandled exception 13 #GP at ip 000000000040771f
error_code=0000 rflags=00010046 cs=00000008
rax=00000000004031ad rcx=0000000000000186 rdx=0000000000000000 rbx=00000000005142f0 rbp=0000000000514260 rsi=0000000000000020 rdi=0000000000000340
r8=0000000000513a65 r9=00000000000003f8 r10=000000000000000d r11=00000000ffffffff
r12=000000000043003c r13=0000000000514450 r14=000000000000000b r15=0000000000000001 cr0=0000000080010011 cr2=0000000000000000 cr3=0000000001007000 cr4=0000000000000020 cr8=0000000000000000

Quoted 5 lines
        STACK: @40771f 40040e 400976 400aef 40148d 401da9 4001ad

FAIL pmu

It looks EVENTSEL0 MSR (0x186) is written a invalid value (0x4031ad) and cause a #GP.

Nope.

Quoted 5 lines

Further investigation shows the #GP is caused by below code in __start_event().

rmsr(MSR_GP_EVENT_SELECTx(event_to_global_idx(evt)),

		  evt->config | EVNTSEL_EN);

Nope.

Quoted 2 lines

The evt->config is correctly initialized but seems corrupted before writing to MSR.

Still nope.

Quoted 11 lines

The original pmu_counter_t layout looks as below.

typedef struct {
	uint32_t ctr;
	uint64_t config;
	uint64_t count;
	int idx;
} pmu_counter_t;

Obviously the config filed crosses two cache lines.

Yeah, no. Cache lines are 64 bytes on x86, and even with the bad layout, the size only adds up to 32 bytes on x86-64. Packing it slightly better drops it to 24 bytes, but that has nothing to do with cache lines.

Quoted 2 lines

When the two cache lines are not updated simultaneously, the config value is corrupted.

This is simply nonsensical. Compilers don't generate accesses that split cache lines unless software is being deliberately stupid, and x86 doesn't corrupt data on unaligned accesses.

The actual problem is that your next patch increases the size of the array in check_counters_many() from 10 to 48 entries. With 32 bytes per entry, it's just enough to overflow the stack when making function calls (the array itself stays on the stack page). And because KUT's percpu and stack management is complete and utter garbage, overflowing the stack clobbers the percpu area.

Of course, it's way too hard to even see that, because all of the code is beyond stupid and (a) doesn't align the stacks to 4KiB, and (b) puts the percpu area at the bottom of the stack "page".

I'll send patches to put band-aids on the per-CPU insanity, along with a refreshed version of this series.

author
#6 lore raw

Re: [kvm-unit-tests patch v6 04/18] x86: pmu: Fix the issue that pmu_counter_t.config crosses cache line

Quoted 55 lines · Sean Christopherson
Quoted 10 lines · Dapeng Mi

When running pmu test on SPR, the following #GP fault is reported.

Unhandled exception 13 #GP at ip 000000000040771f
error_code=0000 rflags=00010046 cs=00000008
rax=00000000004031ad rcx=0000000000000186 rdx=0000000000000000 rbx=00000000005142f0 rbp=0000000000514260 rsi=0000000000000020 rdi=0000000000000340
r8=0000000000513a65 r9=00000000000003f8 r10=000000000000000d r11=00000000ffffffff
r12=000000000043003c r13=0000000000514450 r14=000000000000000b r15=0000000000000001 cr0=0000000080010011 cr2=0000000000000000 cr3=0000000001007000 cr4=0000000000000020 cr8=0000000000000000

Quoted 5 lines
        STACK: @40771f 40040e 400976 400aef 40148d 401da9 4001ad

FAIL pmu

It looks EVENTSEL0 MSR (0x186) is written a invalid value (0x4031ad) and cause a #GP.

Nope.

Quoted 5 lines

Further investigation shows the #GP is caused by below code in __start_event().

rmsr(MSR_GP_EVENT_SELECTx(event_to_global_idx(evt)),

		  evt->config | EVNTSEL_EN);

Nope.

Quoted 2 lines

The evt->config is correctly initialized but seems corrupted before writing to MSR.

Still nope.

Quoted 10 lines

The original pmu_counter_t layout looks as below.

typedef struct {
	uint32_t ctr;
	uint64_t config;
	uint64_t count;
	int idx;
} pmu_counter_t;

Obviously the config filed crosses two cache lines.

Yeah, no. Cache lines are 64 bytes on x86, and even with the bad layout, the size only adds up to 32 bytes on x86-64. Packing it slightly better drops it to 24 bytes, but that has nothing to do with cache lines.

Quoted 2 lines

When the two cache lines are not updated simultaneously, the config value is corrupted.

This is simply nonsensical. Compilers don't generate accesses that split cache lines unless software is being deliberately stupid, and x86 doesn't corrupt data on unaligned accesses.

The actual problem is that your next patch increases the size of the array in check_counters_many() from 10 to 48 entries. With 32 bytes per entry, it's just enough to overflow the stack when making function calls (the array itself stays on the stack page). And because KUT's percpu and stack management is complete and utter garbage, overflowing the stack clobbers the percpu area.

Quoted 6 lines

Of course, it's way too hard to even see that, because all of the code is beyond stupid and (a) doesn't align the stacks to 4KiB, and (b) puts the percpu area at the bottom of the stack "page".

I'll send patches to put band-aids on the per-CPU insanity, along with a refreshed version of this series.

Thumb up! I never realized this issue is caused by stack corruption. I would review and test the v7 patch set later. Thanks.

author
#7 lore raw

PATCH v6 5/18 x86: pmu: Enlarge cnt[] length to 48 in check_counters_many()

In reply to Dapeng Mi

Considering there are already 8 GP counters and 4 fixed counters on latest Intel processors, like Sapphire Rapids. The original cnt[] array length 10 is definitely not enough to cover all supported PMU counters on these new processors even through currently KVM only supports 3 fixed counters at most. This would cause out of bound memory access and may trigger false alarm on PMU counter validation

It's probably more and more GP and fixed counters are introduced in the future and then directly extends the cnt[] array length to 48 once and for all. Base on the layout of IA32_PERF_GLOBAL_CTRL and IA32_PERF_GLOBAL_STATUS, 48 looks enough in near feature.

---
 x86/pmu.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
x86/pmu.c +1 -1
index a0268db8..b4de2680 100644
@@ -255,7 +255,7 @@ static void check_fixed_counters(void)
 
 static void check_counters_many(void)
 {
-	pmu_counter_t cnt[10];
+	pmu_counter_t cnt[48];
 	int i, n;
 
 	for (i = 0, n = 0; n < pmu.nr_gp_counters; i++) {
Signature · 1 line
2.40.1
#8 lore raw

Re: [kvm-unit-tests patch v6 05/18] x86: pmu: Enlarge cnt[] length to 48 in check_counters_many()

Quoted 23 lines · Dapeng Mi

Considering there are already 8 GP counters and 4 fixed counters on latest Intel processors, like Sapphire Rapids. The original cnt[] array length 10 is definitely not enough to cover all supported PMU counters on these new processors even through currently KVM only supports 3 fixed counters at most. This would cause out of bound memory access and may trigger false alarm on PMU counter validation

It's probably more and more GP and fixed counters are introduced in the future and then directly extends the cnt[] array length to 48 once and for all. Base on the layout of IA32_PERF_GLOBAL_CTRL and IA32_PERF_GLOBAL_STATUS, 48 looks enough in near feature.

---
 x86/pmu.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
x86/pmu.c +0 -0
index a0268db8..b4de2680 100644

x86/pmu.c static void check_fixed_counters(void) · line 258

Quoted 5 lines
x86/pmu.c +1 -1
@@ -255,7 +255,7 @@ static void check_fixed_counters(void)
 
 static void check_counters_many(void)
 {
-	pmu_counter_t cnt[10];
+	pmu_counter_t cnt[48];

ARGH. Since the *entire* purpose of increasing the size is to guard against buffer overflow, add an assert that the loop doesn't overflow.

Quoted 6 lines
x86/pmu.c +0 -0
 	int i, n;
 
 	for (i = 0, n = 0; n < pmu.nr_gp_counters; i++) {
Signature · 1 line
2.40.1
author
#9 lore raw

Re: [kvm-unit-tests patch v6 05/18] x86: pmu: Enlarge cnt[] length to 48 in check_counters_many()

Quoted 25 lines · Sean Christopherson
Quoted 24 lines · Dapeng Mi

Considering there are already 8 GP counters and 4 fixed counters on latest Intel processors, like Sapphire Rapids. The original cnt[] array length 10 is definitely not enough to cover all supported PMU counters on these new processors even through currently KVM only supports 3 fixed counters at most. This would cause out of bound memory access and may trigger false alarm on PMU counter validation

It's probably more and more GP and fixed counters are introduced in the future and then directly extends the cnt[] array length to 48 once and for all. Base on the layout of IA32_PERF_GLOBAL_CTRL and IA32_PERF_GLOBAL_STATUS, 48 looks enough in near feature.

---
 x86/pmu.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
x86/pmu.c +0 -0
index a0268db8..b4de2680 100644
@@ -255,7 +255,7 @@ static void check_fixed_counters(void)
 
Quoted 6 lines

x86/pmu.c static void check_fixed_counters(void) · line 258

Quoted 4 lines
x86/pmu.c +1 -1
 static void check_counters_many(void)
 {
-	pmu_counter_t cnt[10];
+	pmu_counter_t cnt[48];

ARGH. Since the *entire* purpose of increasing the size is to guard against buffer overflow, add an assert that the loop doesn't overflow.

This is not only for ensuring no buffer overflow. As the commit message says,  the counter number has already exceeded 10, such as SPR has 12 counters (8 GP + 4 fixed), and there would be more counters in later platfroms. The aim of enlarging the array size is to ensure these counters can be enabled and verified simultaneously.  48 may be too large and 32 should be fair enough. Thanks.

Quoted 7 lines
Quoted 7 lines
x86/pmu.c +0 -0
 	int i, n;
 
 	for (i = 0, n = 0; n < pmu.nr_gp_counters; i++) {
Signature · 1 line
2.40.1
#10 lore raw

Re: [kvm-unit-tests patch v6 05/18] x86: pmu: Enlarge cnt[] length to 48 in check_counters_many()

Quoted 26 lines · Dapeng Mi
Quoted 25 lines · Sean Christopherson
Quoted 24 lines · Dapeng Mi

Considering there are already 8 GP counters and 4 fixed counters on latest Intel processors, like Sapphire Rapids. The original cnt[] array length 10 is definitely not enough to cover all supported PMU counters on these new processors even through currently KVM only supports 3 fixed counters at most. This would cause out of bound memory access and may trigger false alarm on PMU counter validation

It's probably more and more GP and fixed counters are introduced in the future and then directly extends the cnt[] array length to 48 once and for all. Base on the layout of IA32_PERF_GLOBAL_CTRL and IA32_PERF_GLOBAL_STATUS, 48 looks enough in near feature.

---
 x86/pmu.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
x86/pmu.c +0 -0
index a0268db8..b4de2680 100644
@@ -255,7 +255,7 @@ static void check_fixed_counters(void)
 
Quoted 8 lines
Quoted 6 lines

x86/pmu.c static void check_fixed_counters(void) · line 258

Quoted 4 lines
x86/pmu.c +1 -1
 static void check_counters_many(void)
 {
-	pmu_counter_t cnt[10];
+	pmu_counter_t cnt[48];

ARGH. Since the *entire* purpose of increasing the size is to guard against buffer overflow, add an assert that the loop doesn't overflow.

This is not only for ensuring no buffer overflow.

In practice, it is. As is, there are *zero* sanity checks or restrictions on the number of possible counters. Yes, the net effect is that the test doesn't work if a CPU supports more than ARRAY_SIZE(cnt) counters, but the reason the test doesn't work is because such a CPU would cause buffer overflow.

Yes, there are more nuanced reasons for using a large, statically sized array. If the goal was to support any theoretical CPU, the array would be dynamically allocated, but that's not worth the complexity. If the goal just was to support SPR, the size would have been set to 12, but that would incur additional maintenance in the not-too-distant future.

Quoted 2 lines

As the commit message says,  the counter number has already exceeded 10, such as SPR has 12 counters (8 GP + 4 fixed),

I am well aware.

Quoted 3 lines

and there would be more counters in later platfroms. The aim of enlarging the array size is to ensure these counters can be enabled and verified simultaneously.  48 may be too large and 32 should be fair enough. Thanks.

No. Just no. Unless there is an architecturally defined limit, and even then a sanity check is strongly encourage, KVM-related software should never, ever blindly assume a buffer size is "good enough".

author
#11 lore raw

PATCH v6 6/18 x86: pmu: Print measured event count if test fails

In reply to Dapeng Mi

Print the measured event count if the test case fails. This helps users quickly know why the test case fails.

---
 x86/pmu.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)
x86/pmu.c +6 -2
index b4de2680..53bb7ec0 100644
@@ -204,8 +204,12 @@ static noinline void __measure(pmu_counter_t *evt, uint64_t count)
 
 static bool verify_event(uint64_t count, struct pmu_event *e)
 {
-	// printf("%d <= %ld <= %d\n", e->min, count, e->max);
-	return count >= e->min && count <= e->max;
+	bool pass = count >= e->min && count <= e->max;
+
+	if (!pass)
+		printf("FAIL: %d <= %"PRId64" <= %d\n", e->min, count, e->max);
+
+	return pass;
 }
 
 static bool verify_counter(pmu_counter_t *cnt)
Signature · 1 line
2.40.1
author
#12 lore raw

PATCH v6 7/18 x86: pmu: Fix potential out of bound access for fixed events

In reply to Dapeng Mi

Current PMU code doesn't check whether PMU fixed counter number is larger than pre-defined fixed events. If so, it would cause memory access out of range.

So limit validated fixed counters number to MIN(pmu.nr_fixed_counters, ARRAY_SIZE(fixed_events)) and print message to warn that KUT/pmu tests need to be updated if fixed counters number exceeds defined fixed events number.

---
 x86/pmu.c | 27 +++++++++++++++++++++------
 1 file changed, 21 insertions(+), 6 deletions(-)
x86/pmu.c +21 -6
index 53bb7ec0..cc940a61 100644
@@ -54,6 +54,7 @@ char *buf;
 
 static struct pmu_event *gp_events;
 static unsigned int gp_events_size;
+static unsigned int fixed_counters_num;
 
 static inline void loop(void)
 {
@@ -113,8 +114,12 @@ static struct pmu_event* get_counter_event(pmu_counter_t *cnt)
 		for (i = 0; i < gp_events_size; i++)
 			if (gp_events[i].unit_sel == (cnt->config & 0xffff))
 				return &gp_events[i];
-	} else
-		return &fixed_events[cnt->ctr - MSR_CORE_PERF_FIXED_CTR0];
+	} else {
+		unsigned int idx = cnt->ctr - MSR_CORE_PERF_FIXED_CTR0;
+
+		if (idx < ARRAY_SIZE(fixed_events))
+			return &fixed_events[idx];
+	}
 
 	return (void*)0;
 }
@@ -204,8 +209,12 @@ static noinline void __measure(pmu_counter_t *evt, uint64_t count)
 
 static bool verify_event(uint64_t count, struct pmu_event *e)
 {
-	bool pass = count >= e->min && count <= e->max;
+	bool pass;
 
+	if (!e)
+		return false;
+
+	pass = count >= e->min && count <= e->max;
 	if (!pass)
 		printf("FAIL: %d <= %"PRId64" <= %d\n", e->min, count, e->max);
 
@@ -250,7 +259,7 @@ static void check_fixed_counters(void)
 	};
 	int i;
 
-	for (i = 0; i < pmu.nr_fixed_counters; i++) {
+	for (i = 0; i < fixed_counters_num; i++) {
 		cnt.ctr = fixed_events[i].unit_sel;
 		measure_one(&cnt);
 		report(verify_event(cnt.count, &fixed_events[i]), "fixed-%d", i);
@@ -271,7 +280,7 @@ static void check_counters_many(void)
 			gp_events[i % gp_events_size].unit_sel;
 		n++;
 	}
-	for (i = 0; i < pmu.nr_fixed_counters; i++) {
+	for (i = 0; i < fixed_counters_num; i++) {
 		cnt[n].ctr = fixed_events[i].unit_sel;
 		cnt[n].config = EVNTSEL_OS | EVNTSEL_USR;
 		n++;
@@ -419,7 +428,7 @@ static void check_rdpmc(void)
 		else
 			report(cnt.count == (u32)val, "fast-%d", i);
 	}
-	for (i = 0; i < pmu.nr_fixed_counters; i++) {
+	for (i = 0; i < fixed_counters_num; i++) {
 		uint64_t x = val & ((1ull << pmu.fixed_counter_width) - 1);
 		pmu_counter_t cnt = {
 			.ctr = MSR_CORE_PERF_FIXED_CTR0 + i,
@@ -744,6 +753,12 @@ int main(int ac, char **av)
 	printf("Fixed counters:      %d\n", pmu.nr_fixed_counters);
 	printf("Fixed counter width: %d\n", pmu.fixed_counter_width);
 
+	fixed_counters_num = MIN(pmu.nr_fixed_counters, ARRAY_SIZE(fixed_events));
+	if (pmu.nr_fixed_counters > ARRAY_SIZE(fixed_events))
+		report_info("Fixed counters number %d > defined fixed events %ld. "
+			    "Please update test case.", pmu.nr_fixed_counters,
+			    ARRAY_SIZE(fixed_events));
+
 	apic_write(APIC_LVTPC, PMI_VECTOR);
 
 	check_counters();
Signature · 1 line
2.40.1
#13 lore raw

Re: [kvm-unit-tests patch v6 07/18] x86: pmu: Fix potential out of bound access for fixed events

x86/pmu.c int main(int ac, char **av) · line 758

Quoted 7 lines · Dapeng Mi
x86/pmu.c +3 -0
@@ -744,6 +753,12 @@ int main(int ac, char **av)
 	printf("Fixed counters:      %d\n", pmu.nr_fixed_counters);
 	printf("Fixed counter width: %d\n", pmu.fixed_counter_width);
 
+	fixed_counters_num = MIN(pmu.nr_fixed_counters, ARRAY_SIZE(fixed_events));
+	if (pmu.nr_fixed_counters > ARRAY_SIZE(fixed_events))
+		report_info("Fixed counters number %d > defined fixed events %ld. "

Doesn't compile on 32-bit builds. Easiest thing is to cast ARRAY_SIZE, because size_t is different between 32-bit and 64-bit.

Quoted 9 lines
x86/pmu.c +3 -0
+			    "Please update test case.", pmu.nr_fixed_counters,
+			    ARRAY_SIZE(fixed_events));
+
 	apic_write(APIC_LVTPC, PMI_VECTOR);
 
 	check_counters();
Signature · 1 line
2.40.1
author
#14 lore raw

Re: [kvm-unit-tests patch v6 07/18] x86: pmu: Fix potential out of bound access for fixed events

Quoted 10 lines · Sean Christopherson

x86/pmu.c int main(int ac, char **av) · line 758

Quoted 7 lines · Dapeng Mi
x86/pmu.c +3 -0
@@ -744,6 +753,12 @@ int main(int ac, char **av)
 	printf("Fixed counters:      %d\n", pmu.nr_fixed_counters);
 	printf("Fixed counter width: %d\n", pmu.fixed_counter_width);
 
+	fixed_counters_num = MIN(pmu.nr_fixed_counters, ARRAY_SIZE(fixed_events));
+	if (pmu.nr_fixed_counters > ARRAY_SIZE(fixed_events))
+		report_info("Fixed counters number %d > defined fixed events %ld. "

Doesn't compile on 32-bit builds. Easiest thing is to cast ARRAY_SIZE, because size_t is different between 32-bit and 64-bit.

But ARRAY_SIZE() should return same value regardless of 32-bit or 64-bit, right?

Quoted 10 lines
Quoted 10 lines
x86/pmu.c +3 -0
+			    "Please update test case.", pmu.nr_fixed_counters,
+			    ARRAY_SIZE(fixed_events));
+
 	apic_write(APIC_LVTPC, PMI_VECTOR);
 
 	check_counters();
Signature · 1 line
2.40.1
#15 lore raw

Re: [kvm-unit-tests patch v6 07/18] x86: pmu: Fix potential out of bound access for fixed events

Quoted 7 lines · Dapeng Mi
Quoted 5 lines · Sean Christopherson
Quoted 4 lines · Dapeng Mi
x86/pmu.c +0 -0
@@ -744,6 +753,12 @@ int main(int ac, char **av)
 	printf("Fixed counters:      %d\n", pmu.nr_fixed_counters);
 	printf("Fixed counter width: %d\n", pmu.fixed_counter_width);
 
Quoted 8 lines
Quoted 5 lines

x86/pmu.c int main(int ac, char **av) · line 758

Quoted 3 lines
x86/pmu.c +3 -0
+	fixed_counters_num = MIN(pmu.nr_fixed_counters, ARRAY_SIZE(fixed_events));
+	if (pmu.nr_fixed_counters > ARRAY_SIZE(fixed_events))
+		report_info("Fixed counters number %d > defined fixed events %ld. "

Doesn't compile on 32-bit builds. Easiest thing is to cast ARRAY_SIZE, because size_t is different between 32-bit and 64-bit.

But ARRAY_SIZE() should return same value regardless of 32-bit or 64-bit, right?

Yep. The value is the same, but the type "returned" by sizeof() is different. On 32-bit, it's an "unsigned int"; on 64-bit, it's an unsigned long. I.e. the size of sizeof() is different (sorry, couldn't resist).

author
#16 lore raw

PATCH v6 8/18 x86: pmu: Fix cycles event validation failure

In reply to Dapeng Mi

When running pmu test on SPR, sometimes the following failure is reported.

PMU version:         2
GP counters:         8
GP counter width:    48
Mask length:         8
Fixed counters:      3
Fixed counter width: 48

1000000 <= 55109398 <= 50000000
FAIL: Intel: core cycles-0
1000000 <= 18279571 <= 50000000
PASS: Intel: core cycles-1
1000000 <= 12238092 <= 50000000
PASS: Intel: core cycles-2
1000000 <= 7981727 <= 50000000
PASS: Intel: core cycles-3
1000000 <= 6984711 <= 50000000
PASS: Intel: core cycles-4
1000000 <= 6773673 <= 50000000
PASS: Intel: core cycles-5
1000000 <= 6697842 <= 50000000
PASS: Intel: core cycles-6
1000000 <= 6747947 <= 50000000
PASS: Intel: core cycles-7

The count of the "core cycles" on first counter would exceed the upper boundary and leads to a failure, and then the "core cycles" count would drop gradually and reach a stable state.

That looks reasonable. The "core cycles" event is defined as the 1st event in xxx_gp_events[] array and it is always verified at first. when the program loop() is executed at the first time it needs to warm up the pipeline and cache, such as it has to wait for cache is filled. All these warm-up work leads to a quite large core cycles count which may exceeds the verification range.

To avoid the false positive of cycles event caused by warm-up, explicitly introduce a warm-up state before really starting verification.

---
 x86/pmu.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)
x86/pmu.c +16 -0
index cc940a61..e864ebc4 100644
@@ -602,11 +602,27 @@ static void check_tsx_cycles(void)
 	report_prefix_pop();
 }
 
+static void warm_up(void)
+{
+	int i = 8;
+
+	/*
+	 * Since cycles event is always run as the first event, there would be
+	 * a warm-up state to warm up the cache, it leads to the measured cycles
+	 * value may exceed the pre-defined cycles upper boundary and cause
+	 * false positive. To avoid this, introduce an warm-up state before
+	 * the real verification.
+	 */
+	while (i--)
+		loop();
+}
+
 static void check_counters(void)
 {
 	if (is_fep_available())
 		check_emulated_instr();
 
+	warm_up();
 	check_gp_counters();
 	check_fixed_counters();
 	check_rdpmc();
Signature · 1 line
2.40.1
#17 lore raw

Re: [kvm-unit-tests patch v6 08/18] x86: pmu: Fix cycles event validation failure

x86/pmu.c static void check_tsx_cycles(void) · line 617

Quoted 13 lines · Dapeng Mi
x86/pmu.c +13 -0
+static void warm_up(void)
+{
+	int i = 8;
+
+	/*
+	 * Since cycles event is always run as the first event, there would be
+	 * a warm-up state to warm up the cache, it leads to the measured cycles
+	 * value may exceed the pre-defined cycles upper boundary and cause
+	 * false positive. To avoid this, introduce an warm-up state before
+	 * the real verification.
+	 */
+	while (i--)
+		loop();

Use a for-loop.

Quoted 14 lines
x86/pmu.c +3 -0
+}
+
 static void check_counters(void)
 {
 	if (is_fep_available())
 		check_emulated_instr();
 
+	warm_up();
 	check_gp_counters();
 	check_fixed_counters();
 	check_rdpmc();
Signature · 1 line
2.40.1
author
#18 lore raw

Re: [kvm-unit-tests patch v6 08/18] x86: pmu: Fix cycles event validation failure

Quoted 15 lines · Sean Christopherson

x86/pmu.c static void check_tsx_cycles(void) · line 617

Quoted 13 lines · Dapeng Mi
x86/pmu.c +13 -0
+static void warm_up(void)
+{
+	int i = 8;
+
+	/*
+	 * Since cycles event is always run as the first event, there would be
+	 * a warm-up state to warm up the cache, it leads to the measured cycles
+	 * value may exceed the pre-defined cycles upper boundary and cause
+	 * false positive. To avoid this, introduce an warm-up state before
+	 * the real verification.
+	 */
+	while (i--)
+		loop();

Use a for-loop.

Sure.

Quoted 15 lines
Quoted 15 lines
x86/pmu.c +3 -0
+}
+
 static void check_counters(void)
 {
 	if (is_fep_available())
 		check_emulated_instr();
 
+	warm_up();
 	check_gp_counters();
 	check_fixed_counters();
 	check_rdpmc();
Signature · 1 line
2.40.1
author
#19 lore raw

PATCH v6 9/18 x86: pmu: Use macro to replace hard-coded branches event index

In reply to Dapeng Mi

Currently the branches event index is a hard-coded number. User could add new events and cause the branches event index changes in the future, but don't notice the hard-coded event index and forget to update the event index synchronously, then the issue comes.

Thus, replace the hard-coded index to a macro.

---
 x86/pmu.c | 19 ++++++++++++++++++-
 1 file changed, 18 insertions(+), 1 deletion(-)
x86/pmu.c +18 -1
index e864ebc4..496ee877 100644
@@ -50,6 +50,22 @@ struct pmu_event {
 	{"fixed 2", MSR_CORE_PERF_FIXED_CTR0 + 2, 0.1*N, 30*N}
 };
 
+/*
+ * Events index in intel_gp_events[], ensure consistent with
+ * intel_gp_events[].
+ */
+enum {
+	INTEL_BRANCHES_IDX	= 5,
+};
+
+/*
+ * Events index in amd_gp_events[], ensure consistent with
+ * amd_gp_events[].
+ */
+enum {
+	AMD_BRANCHES_IDX	= 2,
+};
+
 char *buf;
 
 static struct pmu_event *gp_events;
@@ -492,7 +508,8 @@ static void check_emulated_instr(void)
 {
 	uint64_t status, instr_start, brnch_start;
 	uint64_t gp_counter_width = (1ull << pmu.gp_counter_width) - 1;
-	unsigned int branch_idx = pmu.is_intel ? 5 : 2;
+	unsigned int branch_idx = pmu.is_intel ?
+				  INTEL_BRANCHES_IDX : AMD_BRANCHES_IDX;
 	pmu_counter_t brnch_cnt = {
 		.ctr = MSR_GP_COUNTERx(0),
 		/* branch instructions */
Signature · 1 line
2.40.1
author
#20 lore raw

PATCH v6 10/18 x86: pmu: Use macro to replace hard-coded ref-cycles event index

In reply to Dapeng Mi

Replace hard-coded ref-cycles event index with macro to avoid possible mismatch issue if new event is added in the future and cause ref-cycles event index changed, but forget to update the hard-coded ref-cycles event index.

---
 x86/pmu.c | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)
x86/pmu.c +7 -3
index 496ee877..523369b2 100644
@@ -55,6 +55,7 @@ struct pmu_event {
  * intel_gp_events[].
  */
 enum {
+	INTEL_REF_CYCLES_IDX	= 2,
 	INTEL_BRANCHES_IDX	= 5,
 };
 
@@ -708,7 +709,8 @@ static void set_ref_cycle_expectations(void)
 {
 	pmu_counter_t cnt = {
 		.ctr = MSR_IA32_PERFCTR0,
-		.config = EVNTSEL_OS | EVNTSEL_USR | intel_gp_events[2].unit_sel,
+		.config = EVNTSEL_OS | EVNTSEL_USR |
+			  intel_gp_events[INTEL_REF_CYCLES_IDX].unit_sel,
 	};
 	uint64_t tsc_delta;
 	uint64_t t0, t1, t2, t3;
@@ -744,8 +746,10 @@ static void set_ref_cycle_expectations(void)
 	if (!tsc_delta)
 		return;
 
-	intel_gp_events[2].min = (intel_gp_events[2].min * cnt.count) / tsc_delta;
-	intel_gp_events[2].max = (intel_gp_events[2].max * cnt.count) / tsc_delta;
+	intel_gp_events[INTEL_REF_CYCLES_IDX].min =
+		(intel_gp_events[INTEL_REF_CYCLES_IDX].min * cnt.count) / tsc_delta;
+	intel_gp_events[INTEL_REF_CYCLES_IDX].max =
+		(intel_gp_events[INTEL_REF_CYCLES_IDX].max * cnt.count) / tsc_delta;
 }
 
 static void check_invalid_rdpmc_gp(void)
Signature · 1 line
2.40.1
author
#21 lore raw

PATCH v6 11/18 x86: pmu: Use macro to replace hard-coded instructions event index

In reply to Dapeng Mi

Replace hard-coded instruction event index with macro to avoid possible mismatch issue if new event is added in the future and cause instructions event index changed, but forget to update the hard-coded event index.

---
 x86/pmu.c | 34 +++++++++++++++++++++++++++-------
 1 file changed, 27 insertions(+), 7 deletions(-)
x86/pmu.c +27 -7
index 523369b2..91484c77 100644
@@ -55,6 +55,7 @@ struct pmu_event {
  * intel_gp_events[].
  */
 enum {
+	INTEL_INSTRUCTIONS_IDX  = 1,
 	INTEL_REF_CYCLES_IDX	= 2,
 	INTEL_BRANCHES_IDX	= 5,
 };
@@ -64,6 +65,7 @@ enum {
  * amd_gp_events[].
  */
 enum {
+	AMD_INSTRUCTIONS_IDX    = 1,
 	AMD_BRANCHES_IDX	= 2,
 };
 
@@ -328,11 +330,16 @@ static uint64_t measure_for_overflow(pmu_counter_t *cnt)
 
 static void check_counter_overflow(void)
 {
-	uint64_t overflow_preset;
 	int i;
+	uint64_t overflow_preset;
+	int instruction_idx = pmu.is_intel ?
+			      INTEL_INSTRUCTIONS_IDX :
+			      AMD_INSTRUCTIONS_IDX;
+
 	pmu_counter_t cnt = {
 		.ctr = MSR_GP_COUNTERx(0),
-		.config = EVNTSEL_OS | EVNTSEL_USR | gp_events[1].unit_sel /* instructions */,
+		.config = EVNTSEL_OS | EVNTSEL_USR |
+			  gp_events[instruction_idx].unit_sel /* instructions */,
 	};
 	overflow_preset = measure_for_overflow(&cnt);
 
@@ -388,13 +395,18 @@ static void check_counter_overflow(void)
 
 static void check_gp_counter_cmask(void)
 {
+	int instruction_idx = pmu.is_intel ?
+			      INTEL_INSTRUCTIONS_IDX :
+			      AMD_INSTRUCTIONS_IDX;
+
 	pmu_counter_t cnt = {
 		.ctr = MSR_GP_COUNTERx(0),
-		.config = EVNTSEL_OS | EVNTSEL_USR | gp_events[1].unit_sel /* instructions */,
+		.config = EVNTSEL_OS | EVNTSEL_USR |
+			  gp_events[instruction_idx].unit_sel /* instructions */,
 	};
 	cnt.config |= (0x2 << EVNTSEL_CMASK_SHIFT);
 	measure_one(&cnt);
-	report(cnt.count < gp_events[1].min, "cmask");
+	report(cnt.count < gp_events[instruction_idx].min, "cmask");
 }
 
 static void do_rdpmc_fast(void *ptr)
@@ -469,9 +481,14 @@ static void check_running_counter_wrmsr(void)
 {
 	uint64_t status;
 	uint64_t count;
+	unsigned int instruction_idx = pmu.is_intel ?
+				       INTEL_INSTRUCTIONS_IDX :
+				       AMD_INSTRUCTIONS_IDX;
+
 	pmu_counter_t evt = {
 		.ctr = MSR_GP_COUNTERx(0),
-		.config = EVNTSEL_OS | EVNTSEL_USR | gp_events[1].unit_sel,
+		.config = EVNTSEL_OS | EVNTSEL_USR |
+			  gp_events[instruction_idx].unit_sel,
 	};
 
 	report_prefix_push("running counter wrmsr");
@@ -480,7 +497,7 @@ static void check_running_counter_wrmsr(void)
 	loop();
 	wrmsr(MSR_GP_COUNTERx(0), 0);
 	stop_event(&evt);
-	report(evt.count < gp_events[1].min, "cntr");
+	report(evt.count < gp_events[instruction_idx].min, "cntr");
 
 	/* clear status before overflow test */
 	if (this_cpu_has_perf_global_status())
@@ -511,6 +528,9 @@ static void check_emulated_instr(void)
 	uint64_t gp_counter_width = (1ull << pmu.gp_counter_width) - 1;
 	unsigned int branch_idx = pmu.is_intel ?
 				  INTEL_BRANCHES_IDX : AMD_BRANCHES_IDX;
+	unsigned int instruction_idx = pmu.is_intel ?
+				       INTEL_INSTRUCTIONS_IDX :
+				       AMD_INSTRUCTIONS_IDX;
 	pmu_counter_t brnch_cnt = {
 		.ctr = MSR_GP_COUNTERx(0),
 		/* branch instructions */
@@ -519,7 +539,7 @@ static void check_emulated_instr(void)
 	pmu_counter_t instr_cnt = {
 		.ctr = MSR_GP_COUNTERx(1),
 		/* instructions */
-		.config = EVNTSEL_OS | EVNTSEL_USR | gp_events[1].unit_sel,
+		.config = EVNTSEL_OS | EVNTSEL_USR | gp_events[instruction_idx].unit_sel,
 	};
 	report_prefix_push("emulated instruction");
 
Signature · 1 line
2.40.1
author
#22 lore raw

PATCH v6 12/18 x86: pmu: Enable and disable PMCs in loop() asm blob

In reply to Dapeng Mi

Currently enabling PMCs, executing loop() and disabling PMCs are divided 3 separated functions. So there could be other instructions executed between enabling PMCS and running loop() or running loop() and disabling PMCs, e.g. if there are multiple counters enabled in measure_many() function, the instructions which enabling the 2nd and more counters would be counted in by the 1st counter.

So current implementation can only verify the correctness of count by an rough range rather than a precise count even for instructions and branches events. Strictly speaking, this verification is meaningless as the test could still pass even though KVM vPMU has something wrong and reports an incorrect instructions or branches count which is in the rough range.

Thus, move the PMCs enabling and disabling into the loop() asm blob and ensure only the loop asm instructions would be counted, then the instructions or branches events can be verified with an precise count instead of an rough range.

---
 x86/pmu.c | 80 ++++++++++++++++++++++++++++++++++++++++++++-----------
 1 file changed, 65 insertions(+), 15 deletions(-)
x86/pmu.c +65 -15
index 91484c77..270f11b9 100644
@@ -19,6 +19,15 @@
 #define EXPECTED_INSTR 17
 #define EXPECTED_BRNCH 5
 
+#define LOOP_ASM(_wrmsr)						\
+	_wrmsr "\n\t"							\
+	"mov %%ecx, %%edi; mov %%ebx, %%ecx;\n\t"			\
+	"1: mov (%1), %2; add $64, %1;\n\t"				\
+	"nop; nop; nop; nop; nop; nop; nop;\n\t"			\
+	"loop 1b;\n\t"							\
+	"mov %%edi, %%ecx; xor %%eax, %%eax; xor %%edx, %%edx;\n\t"	\
+	_wrmsr "\n\t"
+
 typedef struct {
 	uint32_t ctr;
 	uint32_t idx;
@@ -75,13 +84,43 @@ static struct pmu_event *gp_events;
 static unsigned int gp_events_size;
 static unsigned int fixed_counters_num;
 
-static inline void loop(void)
+
+static inline void __loop(void)
+{
+	unsigned long tmp, tmp2, tmp3;
+
+	asm volatile(LOOP_ASM("nop")
+		     : "=c"(tmp), "=r"(tmp2), "=r"(tmp3)
+		     : "0"(N), "1"(buf));
+}
+
+/*
+ * Enable and disable counters in a whole asm blob to ensure
+ * no other instructions are counted in the window between
+ * counters enabling and really LOOP_ASM code executing.
+ * Thus counters can verify instructions and branches events
+ * against precise counts instead of a rough valid count range.
+ */
+static inline void __precise_loop(u64 cntrs)
 {
 	unsigned long tmp, tmp2, tmp3;
+	unsigned int global_ctl = pmu.msr_global_ctl;
+	u32 eax = cntrs & (BIT_ULL(32) - 1);
+	u32 edx = cntrs >> 32;
 
-	asm volatile("1: mov (%1), %2; add $64, %1; nop; nop; nop; nop; nop; nop; nop; loop 1b"
-			: "=c"(tmp), "=r"(tmp2), "=r"(tmp3): "0"(N), "1"(buf));
+	asm volatile(LOOP_ASM("wrmsr")
+		     : "=b"(tmp), "=r"(tmp2), "=r"(tmp3)
+		     : "a"(eax), "d"(edx), "c"(global_ctl),
+		       "0"(N), "1"(buf)
+		     : "edi");
+}
 
+static inline void loop(u64 cntrs)
+{
+	if (!this_cpu_has_perf_global_ctrl())
+		__loop();
+	else
+		__precise_loop(cntrs);
 }
 
 volatile uint64_t irq_received;
@@ -181,18 +220,17 @@ static void __start_event(pmu_counter_t *evt, uint64_t count)
 	    ctrl = (ctrl & ~(0xf << shift)) | (usrospmi << shift);
 	    wrmsr(MSR_CORE_PERF_FIXED_CTR_CTRL, ctrl);
     }
-    global_enable(evt);
     apic_write(APIC_LVTPC, PMI_VECTOR);
 }
 
 static void start_event(pmu_counter_t *evt)
 {
 	__start_event(evt, 0);
+	global_enable(evt);
 }
 
-static void stop_event(pmu_counter_t *evt)
+static void __stop_event(pmu_counter_t *evt)
 {
-	global_disable(evt);
 	if (is_gp(evt)) {
 		wrmsr(MSR_GP_EVENT_SELECTx(event_to_global_idx(evt)),
 		      evt->config & ~EVNTSEL_EN);
@@ -204,14 +242,24 @@ static void stop_event(pmu_counter_t *evt)
 	evt->count = rdmsr(evt->ctr);
 }
 
+static void stop_event(pmu_counter_t *evt)
+{
+	global_disable(evt);
+	__stop_event(evt);
+}
+
 static noinline void measure_many(pmu_counter_t *evt, int count)
 {
 	int i;
+	u64 cntrs = 0;
+
+	for (i = 0; i < count; i++) {
+		__start_event(&evt[i], 0);
+		cntrs |= BIT_ULL(event_to_global_idx(&evt[i]));
+	}
+	loop(cntrs);
 	for (i = 0; i < count; i++)
-		start_event(&evt[i]);
-	loop();
-	for (i = 0; i < count; i++)
-		stop_event(&evt[i]);
+		__stop_event(&evt[i]);
 }
 
 static void measure_one(pmu_counter_t *evt)
@@ -221,9 +269,11 @@ static void measure_one(pmu_counter_t *evt)
 
 static noinline void __measure(pmu_counter_t *evt, uint64_t count)
 {
+	u64 cntrs = BIT_ULL(event_to_global_idx(evt));
+
 	__start_event(evt, count);
-	loop();
-	stop_event(evt);
+	loop(cntrs);
+	__stop_event(evt);
 }
 
 static bool verify_event(uint64_t count, struct pmu_event *e)
@@ -494,7 +544,7 @@ static void check_running_counter_wrmsr(void)
 	report_prefix_push("running counter wrmsr");
 
 	start_event(&evt);
-	loop();
+	__loop();
 	wrmsr(MSR_GP_COUNTERx(0), 0);
 	stop_event(&evt);
 	report(evt.count < gp_events[instruction_idx].min, "cntr");
@@ -511,7 +561,7 @@ static void check_running_counter_wrmsr(void)
 
 	wrmsr(MSR_GP_COUNTERx(0), count);
 
-	loop();
+	__loop();
 	stop_event(&evt);
 
 	if (this_cpu_has_perf_global_status()) {
@@ -652,7 +702,7 @@ static void warm_up(void)
 	 * the real verification.
 	 */
 	while (i--)
-		loop();
+		loop(0);
 }
 
 static void check_counters(void)
Signature · 1 line
2.40.1
author
#23 lore raw

PATCH v6 13/18 x86: pmu: Improve instruction and branches events verification

In reply to Dapeng Mi

If HW supports GLOBAL_CTRL MSR, enabling and disabling PMCs are moved in __precise_count_loop(). Thus, instructions and branches events can be verified against a precise count instead of a rough range.

BTW, some intermittent failures on AMD processors using PerfMonV2 is seen due to variance in counts. This probably has to do with the way instructions leading to a VM-Entry or VM-Exit are accounted when counting retired instructions and branches.

https://lore.kernel.org/all/[email protected]/

So only enable this precise check for Intel processors.

---
 x86/pmu.c | 37 +++++++++++++++++++++++++++++++++++++
 1 file changed, 37 insertions(+)
x86/pmu.c +37 -0
index 270f11b9..13c7c45d 100644
@@ -19,6 +19,11 @@
 #define EXPECTED_INSTR 17
 #define EXPECTED_BRNCH 5
 
+
+/* Enable GLOBAL_CTRL + disable GLOBAL_CTRL instructions */
+#define EXTRA_INSTRNS  (3 + 3)
+#define LOOP_INSTRNS   (N * 10 + EXTRA_INSTRNS)
+#define LOOP_BRANCHES  (N)
 #define LOOP_ASM(_wrmsr)						\
 	_wrmsr "\n\t"							\
 	"mov %%ecx, %%edi; mov %%ebx, %%ecx;\n\t"			\
@@ -123,6 +128,30 @@ static inline void loop(u64 cntrs)
 		__precise_loop(cntrs);
 }
 
+static void adjust_events_range(struct pmu_event *gp_events,
+				int instruction_idx, int branch_idx)
+{
+	/*
+	 * If HW supports GLOBAL_CTRL MSR, enabling and disabling PMCs are
+	 * moved in __precise_loop(). Thus, instructions and branches events
+	 * can be verified against a precise count instead of a rough range.
+	 *
+	 * We see some intermittent failures on AMD processors using PerfMonV2
+	 * due to variance in counts. This probably has to do with the way
+	 * instructions leading to a VM-Entry or VM-Exit are accounted when
+	 * counting retired instructions and branches. Thus only enable the
+	 * precise validation for Intel processors.
+	 */
+	if (pmu.is_intel && this_cpu_has_perf_global_ctrl()) {
+		/* instructions event */
+		gp_events[instruction_idx].min = LOOP_INSTRNS;
+		gp_events[instruction_idx].max = LOOP_INSTRNS;
+		/* branches event */
+		gp_events[branch_idx].min = LOOP_BRANCHES;
+		gp_events[branch_idx].max = LOOP_BRANCHES;
+	}
+}
+
 volatile uint64_t irq_received;
 
 static void cnt_overflow(isr_regs_t *regs)
@@ -832,6 +861,9 @@ static void check_invalid_rdpmc_gp(void)
 
 int main(int ac, char **av)
 {
+	int instruction_idx;
+	int branch_idx;
+
 	setup_vm();
 	handle_irq(PMI_VECTOR, cnt_overflow);
 	buf = malloc(N*64);
@@ -845,13 +877,18 @@ int main(int ac, char **av)
 		}
 		gp_events = (struct pmu_event *)intel_gp_events;
 		gp_events_size = sizeof(intel_gp_events)/sizeof(intel_gp_events[0]);
+		instruction_idx = INTEL_INSTRUCTIONS_IDX;
+		branch_idx = INTEL_BRANCHES_IDX;
 		report_prefix_push("Intel");
 		set_ref_cycle_expectations();
 	} else {
 		gp_events_size = sizeof(amd_gp_events)/sizeof(amd_gp_events[0]);
 		gp_events = (struct pmu_event *)amd_gp_events;
+		instruction_idx = AMD_INSTRUCTIONS_IDX;
+		branch_idx = AMD_BRANCHES_IDX;
 		report_prefix_push("AMD");
 	}
+	adjust_events_range(gp_events, instruction_idx, branch_idx);
 
 	printf("PMU version:         %d\n", pmu.version);
 	printf("GP counters:         %d\n", pmu.nr_gp_counters);
Signature · 1 line
2.40.1
#24 lore raw

Re: [kvm-unit-tests patch v6 13/18] x86: pmu: Improve instruction and branches events verification

Quoted 8 lines · Dapeng Mi

If HW supports GLOBAL_CTRL MSR, enabling and disabling PMCs are moved in __precise_count_loop(). Thus, instructions and branches events can be verified against a precise count instead of a rough range.

BTW, some intermittent failures on AMD processors using PerfMonV2 is seen due to variance in counts. This probably has to do with the way instructions leading to a VM-Entry or VM-Exit are accounted when counting retired instructions and branches.

AMD counts VMRUN as a branch in guest context.

x86/pmu.c static inline void loop(u64 cntrs) · line 146

Quoted 8 lines
x86/pmu.c +8 -0
+	 * We see some intermittent failures on AMD processors using PerfMonV2
+	 * due to variance in counts. This probably has to do with the way
+	 * instructions leading to a VM-Entry or VM-Exit are accounted when
+	 * counting retired instructions and branches. Thus only enable the
+	 * precise validation for Intel processors.
+	 */
+	if (pmu.is_intel && this_cpu_has_perf_global_ctrl()) {
+		/* instructions event */

These comments are useless.

Quoted 7 lines
x86/pmu.c +7 -0
+		gp_events[instruction_idx].min = LOOP_INSTRNS;
+		gp_events[instruction_idx].max = LOOP_INSTRNS;
+		/* branches event */
+		gp_events[branch_idx].min = LOOP_BRANCHES;
+		gp_events[branch_idx].max = LOOP_BRANCHES;
+	}
+}
author
#25 lore raw

Re: [kvm-unit-tests patch v6 13/18] x86: pmu: Improve instruction and branches events verification

Quoted 10 lines · Sean Christopherson
Quoted 8 lines · Dapeng Mi

If HW supports GLOBAL_CTRL MSR, enabling and disabling PMCs are moved in __precise_count_loop(). Thus, instructions and branches events can be verified against a precise count instead of a rough range.

BTW, some intermittent failures on AMD processors using PerfMonV2 is seen due to variance in counts. This probably has to do with the way instructions leading to a VM-Entry or VM-Exit are accounted when counting retired instructions and branches.

AMD counts VMRUN as a branch in guest context.

Good to know. Thanks.

Quoted 10 lines

x86/pmu.c static inline void loop(u64 cntrs) · line 146

Quoted 9 lines
x86/pmu.c +8 -0
+	 * We see some intermittent failures on AMD processors using PerfMonV2
+	 * due to variance in counts. This probably has to do with the way
+	 * instructions leading to a VM-Entry or VM-Exit are accounted when
+	 * counting retired instructions and branches. Thus only enable the
+	 * precise validation for Intel processors.
+	 */
+	if (pmu.is_intel && this_cpu_has_perf_global_ctrl()) {
+		/* instructions event */

These comments are useless.

Sure.

Quoted 8 lines
Quoted 8 lines
x86/pmu.c +7 -0
+		gp_events[instruction_idx].min = LOOP_INSTRNS;
+		gp_events[instruction_idx].max = LOOP_INSTRNS;
+		/* branches event */
+		gp_events[branch_idx].min = LOOP_BRANCHES;
+		gp_events[branch_idx].max = LOOP_BRANCHES;
+	}
+}
author
#26 lore raw

PATCH v6 14/18 x86: pmu: Improve LLC misses event verification

In reply to Dapeng Mi

When running pmu test on SPR, sometimes the following failure is reported.

1 <= 0 <= 1000000
FAIL: Intel: llc misses-4

Currently The LLC misses occurring only depends on probability. It's possible that there is no LLC misses happened in the whole loop(), especially along with processors have larger and larger cache size just like what we observed on SPR.

Thus, add clflush instruction into the loop() asm blob and ensure once LLC miss is triggered at least.

---
 x86/pmu.c | 39 ++++++++++++++++++++++++++-------------
 1 file changed, 26 insertions(+), 13 deletions(-)
x86/pmu.c +26 -13
index 13c7c45d..c9160423 100644
@@ -20,19 +20,30 @@
 #define EXPECTED_BRNCH 5
 
 
-/* Enable GLOBAL_CTRL + disable GLOBAL_CTRL instructions */
-#define EXTRA_INSTRNS  (3 + 3)
+/* Enable GLOBAL_CTRL + disable GLOBAL_CTRL + clflush/mfence instructions */
+#define EXTRA_INSTRNS  (3 + 3 + 2)
 #define LOOP_INSTRNS   (N * 10 + EXTRA_INSTRNS)
 #define LOOP_BRANCHES  (N)
-#define LOOP_ASM(_wrmsr)						\
+#define LOOP_ASM(_wrmsr, _clflush)					\
 	_wrmsr "\n\t"							\
 	"mov %%ecx, %%edi; mov %%ebx, %%ecx;\n\t"			\
+	_clflush "\n\t"                                 		\
+	"mfence;\n\t"                                   		\
 	"1: mov (%1), %2; add $64, %1;\n\t"				\
 	"nop; nop; nop; nop; nop; nop; nop;\n\t"			\
 	"loop 1b;\n\t"							\
 	"mov %%edi, %%ecx; xor %%eax, %%eax; xor %%edx, %%edx;\n\t"	\
 	_wrmsr "\n\t"
 
+#define _loop_asm(_wrmsr, _clflush)				\
+do {								\
+	asm volatile(LOOP_ASM(_wrmsr, _clflush)			\
+		     : "=b"(tmp), "=r"(tmp2), "=r"(tmp3)	\
+		     : "a"(eax), "d"(edx), "c"(global_ctl),	\
+		       "0"(N), "1"(buf)				\
+		     : "edi");					\
+} while (0)
+
 typedef struct {
 	uint32_t ctr;
 	uint32_t idx;
@@ -89,14 +100,17 @@ static struct pmu_event *gp_events;
 static unsigned int gp_events_size;
 static unsigned int fixed_counters_num;
 
-
 static inline void __loop(void)
 {
 	unsigned long tmp, tmp2, tmp3;
+	u32 global_ctl = 0;
+	u32 eax = 0;
+	u32 edx = 0;
 
-	asm volatile(LOOP_ASM("nop")
-		     : "=c"(tmp), "=r"(tmp2), "=r"(tmp3)
-		     : "0"(N), "1"(buf));
+	if (this_cpu_has(X86_FEATURE_CLFLUSH))
+		_loop_asm("nop", "clflush (%1)");
+	else
+		_loop_asm("nop", "nop");
 }
 
 /*
@@ -109,15 +123,14 @@ static inline void __loop(void)
 static inline void __precise_loop(u64 cntrs)
 {
 	unsigned long tmp, tmp2, tmp3;
-	unsigned int global_ctl = pmu.msr_global_ctl;
+	u32 global_ctl = pmu.msr_global_ctl;
 	u32 eax = cntrs & (BIT_ULL(32) - 1);
 	u32 edx = cntrs >> 32;
 
-	asm volatile(LOOP_ASM("wrmsr")
-		     : "=b"(tmp), "=r"(tmp2), "=r"(tmp3)
-		     : "a"(eax), "d"(edx), "c"(global_ctl),
-		       "0"(N), "1"(buf)
-		     : "edi");
+	if (this_cpu_has(X86_FEATURE_CLFLUSH))
+		_loop_asm("wrmsr", "clflush (%1)");
+	else
+		_loop_asm("wrmsr", "nop");
 }
 
 static inline void loop(u64 cntrs)
Signature · 1 line
2.40.1
author
#27 lore raw

PATCH v6 15/18 x86: pmu: Adjust lower boundary of llc-misses event to 0 for legacy CPUs

In reply to Dapeng Mi

For these legacy Intel CPUs without clflush/clflushopt support, there is on way to force to trigger a LLC miss and the measured llc misses is possible to be 0. Thus adjust the lower boundary of llc-misses event to 0 to avoid possible false positive.

---
 x86/pmu.c | 10 ++++++++++
 1 file changed, 10 insertions(+)
x86/pmu.c +10 -0
index c9160423..47b6305d 100644
@@ -82,6 +82,7 @@ struct pmu_event {
 enum {
 	INTEL_INSTRUCTIONS_IDX  = 1,
 	INTEL_REF_CYCLES_IDX	= 2,
+	INTEL_LLC_MISSES_IDX	= 4,
 	INTEL_BRANCHES_IDX	= 5,
 };
 
@@ -892,6 +893,15 @@ int main(int ac, char **av)
 		gp_events_size = sizeof(intel_gp_events)/sizeof(intel_gp_events[0]);
 		instruction_idx = INTEL_INSTRUCTIONS_IDX;
 		branch_idx = INTEL_BRANCHES_IDX;
+
+		/*
+		 * For legacy Intel CPUS without clflush/clflushopt support,
+		 * there is no way to force to trigger a LLC miss, thus set
+		 * the minimum value to 0 to avoid false positives.
+		 */
+		if (!this_cpu_has(X86_FEATURE_CLFLUSH))
+			gp_events[INTEL_LLC_MISSES_IDX].min = 0;
+
 		report_prefix_push("Intel");
 		set_ref_cycle_expectations();
 	} else {
Signature · 1 line
2.40.1
author
#28 lore raw

PATCH v6 16/18 x86: pmu: Add IBPB indirect jump asm blob

In reply to Dapeng Mi

Currently the lower boundary of branch misses event is set to 0. Strictly speaking 0 shouldn't be a valid count since it can't tell us if branch misses event counter works correctly or even disabled. Whereas it's also possible and reasonable that branch misses event count is 0 especailly for such simple loop() program with advanced branch predictor.

To eliminate such ambiguity and make branch misses event verification more acccurately, an extra IBPB indirect jump asm blob is appended and IBPB command is leveraged to clear the branch target buffer and force to cause a branch miss for the indirect jump.

---
 x86/pmu.c | 71 +++++++++++++++++++++++++++++++++++++++++++------------
 1 file changed, 56 insertions(+), 15 deletions(-)
x86/pmu.c +56 -15
index 47b6305d..279d418d 100644
@@ -19,25 +19,52 @@
 #define EXPECTED_INSTR 17
 #define EXPECTED_BRNCH 5
 
-
-/* Enable GLOBAL_CTRL + disable GLOBAL_CTRL + clflush/mfence instructions */
-#define EXTRA_INSTRNS  (3 + 3 + 2)
+#define IBPB_JMP_INSTRNS      9
+#define IBPB_JMP_BRANCHES     2
+
+#if defined(__i386__) || defined(_M_IX86) /* i386 */
+#define IBPB_JMP_ASM(_wrmsr)				\
+	"mov $1, %%eax; xor %%edx, %%edx;\n\t"		\
+	"mov $73, %%ecx;\n\t"				\
+	_wrmsr "\n\t"					\
+	"call 1f\n\t"					\
+	"1: pop %%eax\n\t"				\
+	"add $(2f-1b), %%eax\n\t"			\
+	"jmp *%%eax;\n\t"                               \
+	"nop;\n\t"					\
+	"2: nop;\n\t"
+#else /* x86_64 */
+#define IBPB_JMP_ASM(_wrmsr)				\
+	"mov $1, %%eax; xor %%edx, %%edx;\n\t"		\
+	"mov $73, %%ecx;\n\t"				\
+	_wrmsr "\n\t"					\
+	"call 1f\n\t"					\
+	"1: pop %%rax\n\t"				\
+	"add $(2f-1b), %%rax\n\t"                       \
+	"jmp *%%rax;\n\t"                               \
+	"nop;\n\t"					\
+	"2: nop;\n\t"
+#endif
+
+/* GLOBAL_CTRL enable + disable + clflush/mfence + IBPB_JMP */
+#define EXTRA_INSTRNS  (3 + 3 + 2 + IBPB_JMP_INSTRNS)
 #define LOOP_INSTRNS   (N * 10 + EXTRA_INSTRNS)
-#define LOOP_BRANCHES  (N)
-#define LOOP_ASM(_wrmsr, _clflush)					\
-	_wrmsr "\n\t"							\
+#define LOOP_BRANCHES  (N + IBPB_JMP_BRANCHES)
+#define LOOP_ASM(_wrmsr1, _clflush, _wrmsr2)				\
+	_wrmsr1 "\n\t"							\
 	"mov %%ecx, %%edi; mov %%ebx, %%ecx;\n\t"			\
 	_clflush "\n\t"                                 		\
 	"mfence;\n\t"                                   		\
 	"1: mov (%1), %2; add $64, %1;\n\t"				\
 	"nop; nop; nop; nop; nop; nop; nop;\n\t"			\
 	"loop 1b;\n\t"							\
+	IBPB_JMP_ASM(_wrmsr2) 						\
 	"mov %%edi, %%ecx; xor %%eax, %%eax; xor %%edx, %%edx;\n\t"	\
-	_wrmsr "\n\t"
+	_wrmsr1 "\n\t"
 
-#define _loop_asm(_wrmsr, _clflush)				\
+#define _loop_asm(_wrmsr1, _clflush, _wrmsr2)			\
 do {								\
-	asm volatile(LOOP_ASM(_wrmsr, _clflush)			\
+	asm volatile(LOOP_ASM(_wrmsr1, _clflush, _wrmsr2)	\
 		     : "=b"(tmp), "=r"(tmp2), "=r"(tmp3)	\
 		     : "a"(eax), "d"(edx), "c"(global_ctl),	\
 		       "0"(N), "1"(buf)				\
@@ -101,6 +128,12 @@ static struct pmu_event *gp_events;
 static unsigned int gp_events_size;
 static unsigned int fixed_counters_num;
 
+static int has_ibpb(void)
+{
+	return this_cpu_has(X86_FEATURE_SPEC_CTRL) ||
+	       this_cpu_has(X86_FEATURE_AMD_IBPB);
+}
+
 static inline void __loop(void)
 {
 	unsigned long tmp, tmp2, tmp3;
@@ -108,10 +141,14 @@ static inline void __loop(void)
 	u32 eax = 0;
 	u32 edx = 0;
 
-	if (this_cpu_has(X86_FEATURE_CLFLUSH))
-		_loop_asm("nop", "clflush (%1)");
+	if (this_cpu_has(X86_FEATURE_CLFLUSH) && has_ibpb())
+		_loop_asm("nop", "clflush (%1)", "wrmsr");
+	else if (this_cpu_has(X86_FEATURE_CLFLUSH))
+		_loop_asm("nop", "clflush (%1)", "nop");
+	else if (has_ibpb())
+		_loop_asm("nop", "nop", "wrmsr");
 	else
-		_loop_asm("nop", "nop");
+		_loop_asm("nop", "nop", "nop");
 }
 
 /*
@@ -128,10 +165,14 @@ static inline void __precise_loop(u64 cntrs)
 	u32 eax = cntrs & (BIT_ULL(32) - 1);
 	u32 edx = cntrs >> 32;
 
-	if (this_cpu_has(X86_FEATURE_CLFLUSH))
-		_loop_asm("wrmsr", "clflush (%1)");
+	if (this_cpu_has(X86_FEATURE_CLFLUSH) && has_ibpb())
+		_loop_asm("wrmsr", "clflush (%1)", "wrmsr");
+	else if (this_cpu_has(X86_FEATURE_CLFLUSH))
+		_loop_asm("wrmsr", "clflush (%1)", "nop");
+	else if (has_ibpb())
+		_loop_asm("wrmsr", "nop", "wrmsr");
 	else
-		_loop_asm("wrmsr", "nop");
+		_loop_asm("wrmsr", "nop", "nop");
 }
 
 static inline void loop(u64 cntrs)
Signature · 1 line
2.40.1
author
#29 lore raw

PATCH v6 17/18 x86: pmu: Adjust lower boundary of branch-misses event

In reply to Dapeng Mi

Since the IBPB command is added to force to trigger a branch miss at least, the lower boundary of branch misses event is increased to 1 by default. For these CPUs without IBPB support, adjust dynamically the lower boundary to 0 to avoid false positive.

---
 x86/pmu.c | 25 +++++++++++++++++++++----
 1 file changed, 21 insertions(+), 4 deletions(-)
x86/pmu.c +21 -4
index 279d418d..c7848fd1 100644
@@ -90,12 +90,12 @@ struct pmu_event {
 	{"llc references", 0x4f2e, 1, 2*N},
 	{"llc misses", 0x412e, 1, 1*N},
 	{"branches", 0x00c4, 1*N, 1.1*N},
-	{"branch misses", 0x00c5, 0, 0.1*N},
+	{"branch misses", 0x00c5, 1, 0.1*N},
 }, amd_gp_events[] = {
 	{"core cycles", 0x0076, 1*N, 50*N},
 	{"instructions", 0x00c0, 10*N, 10.2*N},
 	{"branches", 0x00c2, 1*N, 1.1*N},
-	{"branch misses", 0x00c3, 0, 0.1*N},
+	{"branch misses", 0x00c3, 1, 0.1*N},
 }, fixed_events[] = {
 	{"fixed 0", MSR_CORE_PERF_FIXED_CTR0, 10*N, 10.2*N},
 	{"fixed 1", MSR_CORE_PERF_FIXED_CTR0 + 1, 1*N, 30*N},
@@ -111,6 +111,7 @@ enum {
 	INTEL_REF_CYCLES_IDX	= 2,
 	INTEL_LLC_MISSES_IDX	= 4,
 	INTEL_BRANCHES_IDX	= 5,
+	INTEL_BRANCH_MISS_IDX	= 6,
 };
 
 /*
@@ -120,6 +121,7 @@ enum {
 enum {
 	AMD_INSTRUCTIONS_IDX    = 1,
 	AMD_BRANCHES_IDX	= 2,
+	AMD_BRANCH_MISS_IDX	= 3,
 };
 
 char *buf;
@@ -184,7 +186,8 @@ static inline void loop(u64 cntrs)
 }
 
 static void adjust_events_range(struct pmu_event *gp_events,
-				int instruction_idx, int branch_idx)
+				int instruction_idx, int branch_idx,
+				int branch_miss_idx)
 {
 	/*
 	 * If HW supports GLOBAL_CTRL MSR, enabling and disabling PMCs are
@@ -205,6 +208,17 @@ static void adjust_events_range(struct pmu_event *gp_events,
 		gp_events[branch_idx].min = LOOP_BRANCHES;
 		gp_events[branch_idx].max = LOOP_BRANCHES;
 	}
+
+	/*
+	 * For CPUs without IBPB support, no way to force to trigger a
+	 * branch miss and the measured branch misses is possible to be
+	 * 0. Thus overwrite the lower boundary of branch misses event
+	 * to 0 to avoid false positive.
+	 */
+	if (!has_ibpb()) {
+		/* branch misses event */
+		gp_events[branch_miss_idx].min = 0;
+	}
 }
 
 volatile uint64_t irq_received;
@@ -918,6 +932,7 @@ int main(int ac, char **av)
 {
 	int instruction_idx;
 	int branch_idx;
+	int branch_miss_idx;
 
 	setup_vm();
 	handle_irq(PMI_VECTOR, cnt_overflow);
@@ -934,6 +949,7 @@ int main(int ac, char **av)
 		gp_events_size = sizeof(intel_gp_events)/sizeof(intel_gp_events[0]);
 		instruction_idx = INTEL_INSTRUCTIONS_IDX;
 		branch_idx = INTEL_BRANCHES_IDX;
+		branch_miss_idx = INTEL_BRANCH_MISS_IDX;
 
 		/*
 		 * For legacy Intel CPUS without clflush/clflushopt support,
@@ -950,9 +966,10 @@ int main(int ac, char **av)
 		gp_events = (struct pmu_event *)amd_gp_events;
 		instruction_idx = AMD_INSTRUCTIONS_IDX;
 		branch_idx = AMD_BRANCHES_IDX;
+		branch_miss_idx = AMD_BRANCH_MISS_IDX;
 		report_prefix_push("AMD");
 	}
-	adjust_events_range(gp_events, instruction_idx, branch_idx);
+	adjust_events_range(gp_events, instruction_idx, branch_idx, branch_miss_idx);
 
 	printf("PMU version:         %d\n", pmu.version);
 	printf("GP counters:         %d\n", pmu.nr_gp_counters);
Signature · 1 line
2.40.1
#30 lore raw

Re: [kvm-unit-tests patch v6 17/18] x86: pmu: Adjust lower boundary of branch-misses event

x86/pmu.c static void adjust_events_range(struct pmu_event *gp_events, · line 219

Quoted 13 lines · Dapeng Mi
x86/pmu.c +9 -0
@@ -205,6 +208,17 @@ static void adjust_events_range(struct pmu_event *gp_events,
 		gp_events[branch_idx].min = LOOP_BRANCHES;
 		gp_events[branch_idx].max = LOOP_BRANCHES;
 	}
+
+	/*
+	 * For CPUs without IBPB support, no way to force to trigger a
+	 * branch miss and the measured branch misses is possible to be
+	 * 0. Thus overwrite the lower boundary of branch misses event
+	 * to 0 to avoid false positive.
+	 */
+	if (!has_ibpb()) {
+		/* branch misses event */

This comment is worse than useless, because it necessitates curly braces.

Quoted 3 lines
x86/pmu.c +2 -0
+		gp_events[branch_miss_idx].min = 0;
+	}
 }
author
#31 lore raw

Re: [kvm-unit-tests patch v6 17/18] x86: pmu: Adjust lower boundary of branch-misses event

Quoted 15 lines · Sean Christopherson

x86/pmu.c static void adjust_events_range(struct pmu_event *gp_events, · line 219

Quoted 13 lines · Dapeng Mi
x86/pmu.c +9 -0
@@ -205,6 +208,17 @@ static void adjust_events_range(struct pmu_event *gp_events,
 		gp_events[branch_idx].min = LOOP_BRANCHES;
 		gp_events[branch_idx].max = LOOP_BRANCHES;
 	}
+
+	/*
+	 * For CPUs without IBPB support, no way to force to trigger a
+	 * branch miss and the measured branch misses is possible to be
+	 * 0. Thus overwrite the lower boundary of branch misses event
+	 * to 0 to avoid false positive.
+	 */
+	if (!has_ibpb()) {
+		/* branch misses event */

This comment is worse than useless, because it necessitates curly braces.

Ah. Yes.

Quoted 4 lines
Quoted 4 lines
x86/pmu.c +2 -0
+		gp_events[branch_miss_idx].min = 0;
+	}
 }
author
#32 lore raw

PATCH v6 18/18 x86: pmu: Optimize emulated instruction validation

In reply to Dapeng Mi

For support CPUs supporting PERF_GLOBAL_CTRL MSR, the validation for emulated instruction can be improved to check against precise counts for instructions and branches events instead of a rough range.

Move enabling and disabling PERF_GLOBAL_CTRL MSR into kvm_fep_asm blob, thus instructions and branches events can be verified against precise counts.

---
 x86/pmu.c | 108 ++++++++++++++++++++++++++++++++----------------------
 1 file changed, 65 insertions(+), 43 deletions(-)
x86/pmu.c +65 -43
index c7848fd1..3a5659b2 100644
@@ -14,11 +14,6 @@
 
 #define N 1000000
 
-// These values match the number of instructions and branches in the
-// assembly block in check_emulated_instr().
-#define EXPECTED_INSTR 17
-#define EXPECTED_BRNCH 5
-
 #define IBPB_JMP_INSTRNS      9
 #define IBPB_JMP_BRANCHES     2
 
@@ -71,6 +66,40 @@ do {								\
 		     : "edi");					\
 } while (0)
 
+/* the number of instructions and branches of the kvm_fep_asm() blob */
+#define KVM_FEP_INSTR	22
+#define KVM_FEP_BRNCH	5
+
+/*
+ * KVM_FEP is a magic prefix that forces emulation so
+ * 'KVM_FEP "jne label\n"' just counts as a single instruction.
+ */
+#define kvm_fep_asm(_wrmsr)			\
+do {						\
+	asm volatile(				\
+		_wrmsr "\n\t"			\
+		"mov %%ecx, %%edi;\n\t"		\
+		"mov $0x0, %%eax;\n\t"		\
+		"cmp $0x0, %%eax;\n\t"		\
+		KVM_FEP "jne 1f\n\t"		\
+		KVM_FEP "jne 1f\n\t"		\
+		KVM_FEP "jne 1f\n\t"		\
+		KVM_FEP "jne 1f\n\t"		\
+		KVM_FEP "jne 1f\n\t"		\
+		"mov $0xa, %%eax; cpuid;\n\t"	\
+		"mov $0xa, %%eax; cpuid;\n\t"	\
+		"mov $0xa, %%eax; cpuid;\n\t"	\
+		"mov $0xa, %%eax; cpuid;\n\t"	\
+		"mov $0xa, %%eax; cpuid;\n\t"	\
+		"1: mov %%edi, %%ecx; \n\t"	\
+		"xor %%eax, %%eax; \n\t"	\
+		"xor %%edx, %%edx;\n\t"		\
+		_wrmsr "\n\t"			\
+		:				\
+		: "a"(eax), "d"(edx), "c"(ecx)	\
+		: "ebx", "edi");		\
+} while (0)
+
 typedef struct {
 	uint32_t ctr;
 	uint32_t idx;
@@ -672,6 +701,7 @@ static void check_running_counter_wrmsr(void)
 
 static void check_emulated_instr(void)
 {
+	u32 eax, edx, ecx;
 	uint64_t status, instr_start, brnch_start;
 	uint64_t gp_counter_width = (1ull << pmu.gp_counter_width) - 1;
 	unsigned int branch_idx = pmu.is_intel ?
@@ -679,6 +709,7 @@ static void check_emulated_instr(void)
 	unsigned int instruction_idx = pmu.is_intel ?
 				       INTEL_INSTRUCTIONS_IDX :
 				       AMD_INSTRUCTIONS_IDX;
+
 	pmu_counter_t brnch_cnt = {
 		.ctr = MSR_GP_COUNTERx(0),
 		/* branch instructions */
@@ -694,55 +725,46 @@ static void check_emulated_instr(void)
 	if (this_cpu_has_perf_global_status())
 		pmu_clear_global_status();
 
-	start_event(&brnch_cnt);
-	start_event(&instr_cnt);
+	__start_event(&brnch_cnt, 0);
+	__start_event(&instr_cnt, 0);
 
-	brnch_start = -EXPECTED_BRNCH;
-	instr_start = -EXPECTED_INSTR;
+	brnch_start = -KVM_FEP_BRNCH;
+	instr_start = -KVM_FEP_INSTR;
 	wrmsr(MSR_GP_COUNTERx(0), brnch_start & gp_counter_width);
 	wrmsr(MSR_GP_COUNTERx(1), instr_start & gp_counter_width);
-	// KVM_FEP is a magic prefix that forces emulation so
-	// 'KVM_FEP "jne label\n"' just counts as a single instruction.
-	asm volatile(
-		"mov $0x0, %%eax\n"
-		"cmp $0x0, %%eax\n"
-		KVM_FEP "jne label\n"
-		KVM_FEP "jne label\n"
-		KVM_FEP "jne label\n"
-		KVM_FEP "jne label\n"
-		KVM_FEP "jne label\n"
-		"mov $0xa, %%eax\n"
-		"cpuid\n"
-		"mov $0xa, %%eax\n"
-		"cpuid\n"
-		"mov $0xa, %%eax\n"
-		"cpuid\n"
-		"mov $0xa, %%eax\n"
-		"cpuid\n"
-		"mov $0xa, %%eax\n"
-		"cpuid\n"
-		"label:\n"
-		:
-		:
-		: "eax", "ebx", "ecx", "edx");
 
-	if (this_cpu_has_perf_global_ctrl())
-		wrmsr(pmu.msr_global_ctl, 0);
+	if (this_cpu_has_perf_global_ctrl()) {
+		eax = BIT(0) | BIT(1);
+		ecx = pmu.msr_global_ctl;
+		edx = 0;
+		kvm_fep_asm("wrmsr");
+	} else {
+		eax = ecx = edx = 0;
+		kvm_fep_asm("nop");
+	}
 
-	stop_event(&brnch_cnt);
-	stop_event(&instr_cnt);
+	__stop_event(&brnch_cnt);
+	__stop_event(&instr_cnt);
 
 	// Check that the end count - start count is at least the expected
 	// number of instructions and branches.
-	report(instr_cnt.count - instr_start >= EXPECTED_INSTR,
-	       "instruction count");
-	report(brnch_cnt.count - brnch_start >= EXPECTED_BRNCH,
-	       "branch count");
+	if (this_cpu_has_perf_global_ctrl()) {
+		report(instr_cnt.count - instr_start == KVM_FEP_INSTR,
+		       "instruction count");
+		report(brnch_cnt.count - brnch_start == KVM_FEP_BRNCH,
+		       "branch count");
+	} else {
+		report(instr_cnt.count - instr_start >= KVM_FEP_INSTR,
+		       "instruction count");
+		report(brnch_cnt.count - brnch_start >= KVM_FEP_BRNCH,
+		       "branch count");
+	}
+
 	if (this_cpu_has_perf_global_status()) {
 		// Additionally check that those counters overflowed properly.
 		status = rdmsr(pmu.msr_global_status);
-		report(status & 1, "branch counter overflow");
-		report(status & 2, "instruction counter overflow");
+		report(status & BIT_ULL(0), "branch counter overflow");
+		report(status & BIT_ULL(1), "instruction counter overflow");
 	}
 
 	report_prefix_pop();
Signature · 1 line
2.40.1