pnv/xive: Print CPU target in all TIMA traces
PATCH 1/1 pnv/xive: Print CPU target in all TIMA traces
Add the CPU target in the trace when reading/writing the TIMA space. It was already done for other TIMA ops (notify, accept, ...), only missing for those 2. Useful for debug and even more now that we experiment with SMT.
--- hw/intc/trace-events | 4 ++-- hw/intc/xive.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-)
hw/intc/trace-events +2 -2
@@ -265,8 +265,8 @@ xive_source_esb_read(uint64_t addr, uint32_t srcno, uint64_t value) "@0x%"PRIx64 xive_source_esb_write(uint64_t addr, uint32_t srcno, uint64_t value) "@0x%"PRIx64" IRQ 0x%x val=0x%"PRIx64 xive_router_end_notify(uint8_t end_blk, uint32_t end_idx, uint32_t end_data) "END 0x%02x/0x%04x -> enqueue 0x%08x" xive_router_end_escalate(uint8_t end_blk, uint32_t end_idx, uint8_t esc_blk, uint32_t esc_idx, uint32_t end_data) "END 0x%02x/0x%04x -> escalate END 0x%02x/0x%04x data 0x%08x" -xive_tctx_tm_write(uint64_t offset, unsigned int size, uint64_t value) "@0x%"PRIx64" sz=%d val=0x%" PRIx64 -xive_tctx_tm_read(uint64_t offset, unsigned int size, uint64_t value) "@0x%"PRIx64" sz=%d val=0x%" PRIx64 +xive_tctx_tm_write(uint32_t index, uint64_t offset, unsigned int size, uint64_t value) "target=%d @0x%"PRIx64" sz=%d val=0x%" PRIx64 +xive_tctx_tm_read(uint32_t index, uint64_t offset, unsigned int size, uint64_t value) "target=%d @0x%"PRIx64" sz=%d val=0x%" PRIx64 xive_presenter_notify(uint8_t nvt_blk, uint32_t nvt_idx, uint8_t ring) "found NVT 0x%x/0x%x ring=0x%x" xive_end_source_read(uint8_t end_blk, uint32_t end_idx, uint64_t addr) "END 0x%x/0x%x @0x%"PRIx64
hw/intc/xive.c +2 -2
@@ -566,7 +566,7 @@ void xive_tctx_tm_write(XivePresenter *xptr, XiveTCTX *tctx, hwaddr offset, {const XiveTmOp *xto; -trace_xive_tctx_tm_write (offset, size, value); +trace_xive_tctx_tm_write (tctx->cs->cpu_index, offset, size, value);/* * TODO: check V bit in Q[0-3]W2
@@ -639,7 +639,7 @@ uint64_t xive_tctx_tm_read(XivePresenter *xptr, XiveTCTX *tctx, hwaddr offset,*/ ret =xive_tm_raw_read (tctx, offset, size); out: -trace_xive_tctx_tm_read (offset, size, ret); +trace_xive_tctx_tm_read (tctx->cs->cpu_index, offset, size, ret);return ret; }
Signature · 1 line
2.41.0
Quoted 16 lines · Frederic Barrat
Add the CPU target in the trace when reading/writing the TIMA space. It was already done for other TIMA ops (notify, accept, ...), only missing for those 2. Useful for debug and even more now that we experiment with SMT.
Signed-off-by Frederic Barrat <[email protected]>--- hw/intc/trace-events | 4 ++-- hw/intc/xive.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-)hw/intc/trace-events +0
-0
hw/intc/trace-events xive_source_esb_read(uint64_t addr, uint32_t srcno, uint64_t value) "@0x%"PRIx64 · line 269
Quoted 7 lines
hw/intc/trace-events +2
-2@@ -265,8 +265,8 @@ xive_source_esb_read(uint64_t addr, uint32_t srcno, uint64_t value) "@0x%"PRIx64 xive_source_esb_write(uint64_t addr, uint32_t srcno, uint64_t value) "@0x%"PRIx64" IRQ 0x%x val=0x%"PRIx64 xive_router_end_notify(uint8_t end_blk, uint32_t end_idx, uint32_t end_data) "END 0x%02x/0x%04x -> enqueue 0x%08x" xive_router_end_escalate(uint8_t end_blk, uint32_t end_idx, uint8_t esc_blk, uint32_t esc_idx, uint32_t end_data) "END 0x%02x/0x%04x -> escalate END 0x%02x/0x%04x data 0x%08x" -xive_tctx_tm_write(uint64_t offset, unsigned int size, uint64_t value) "@0x%"PRIx64" sz=%d val=0x%" PRIx64 -xive_tctx_tm_read(uint64_t offset, unsigned int size, uint64_t value) "@0x%"PRIx64" sz=%d val=0x%" PRIx64 +xive_tctx_tm_write(uint32_t index, uint64_t offset, unsigned int size, uint64_t value) "target=%d @0x%"PRIx64" sz=%d val=0x%" PRIx64 +xive_tctx_tm_read(uint32_t index, uint64_t offset, unsigned int size, uint64_t value) "target=%d @0x%"PRIx64" sz=%d val=0x%" PRIx64
"target" is kinda confusing, what about:
xive_tctx_tm_read(uint32_t cpu_index, ...) "cpu=%d @0x%"PRIx64" ...
?
Quoted 27 lines · Philippe Mathieu-Daudé
Quoted 19 lines · Frederic Barrat
Add the CPU target in the trace when reading/writing the TIMA space. It was already done for other TIMA ops (notify, accept, ...), only missing for those 2. Useful for debug and even more now that we experiment with SMT.
Signed-off-by Frederic Barrat <[email protected]>---
hw/intc/trace-events | 4 ++--
hw/intc/xive.c | 4 ++--2 files changed, 4 insertions(+), 4 deletions(-)hw/intc/trace-events +0
-0@@ -265,8 +265,8 @@ xive_source_esb_read(uint64_t addr, uint32_t srcno, uint64_t value) "@0x%"PRIx64
xive_source_esb_write(uint64_t addr, uint32_t srcno, uint64_t value)"@0x%"PRIx64" IRQ 0x%x val=0x%"PRIx64
xive_router_end_notify(uint8_t end_blk, uint32_t end_idx, uint32_t end_data)"END 0x%02x/0x%04x -> enqueue 0x%08x"xive_router_end_escalate(uint8_t end_blk, uint32_t end_idx, uint8_t esc_blk, uint32_t esc_idx, uint32_t end_data)"END 0x%02x/0x%04x -> escalate END 0x%02x/0x%04x data 0x%08x"hw/intc/trace-events xive_source_esb_read(uint64_t addr, uint32_t srcno, uint64_t value) "@0x%"PRIx64 · line 269
Quoted 4 lines
hw/intc/trace-events +2
-2-xive_tctx_tm_write(uint64_t offset, unsigned int size, uint64_t value) "@0x%"PRIx64" sz=%d val=0x%" PRIx64 -xive_tctx_tm_read(uint64_t offset, unsigned int size, uint64_t value) "@0x%"PRIx64" sz=%d val=0x%" PRIx64 +xive_tctx_tm_write(uint32_t index, uint64_t offset, unsigned int size, uint64_t value) "target=%d @0x%"PRIx64" sz=%d val=0x%" PRIx64 +xive_tctx_tm_read(uint32_t index, uint64_t offset, unsigned int size, uint64_t value) "target=%d @0x%"PRIx64" sz=%d val=0x%" PRIx64"target" is kinda confusing, what about:
Quoted 1 line
xive_tctx_tm_read(uint32_t cpu_index, ...)"cpu=%d @0x%"PRIx64" ...
An interrupt 'source' is served by a 'target', a target could be a CPU, a vCPU id, a group of vCPU, a process id.
'target' is part of the XIVE nomenclature, in HW specs, in drivers, FW, Linux, KVM, and models in QEMU. It is fine.
Thanks,
C.
Quoted 2 lines
?
Quoted 33 lines · Cédric Le Goater
Quoted 32 lines · Philippe Mathieu-Daudé
Quoted 20 lines · Frederic Barrat
Add the CPU target in the trace when reading/writing the TIMA space. It was already done for other TIMA ops (notify, accept, ...), only missing for those 2. Useful for debug and even more now that we experiment with SMT.
Signed-off-by Frederic Barrat <[email protected]>---
hw/intc/trace-events | 4 ++--
hw/intc/xive.c | 4 ++--2 files changed, 4 insertions(+), 4 deletions(-)hw/intc/trace-events +0
-0@@ -265,8 +265,8 @@ xive_source_esb_read(uint64_t addr, uint32_tsrcno,
uint64_tvalue) "@0x%"PRIx64
xive_source_esb_write(uint64_t addr, uint32_t srcno, uint64_t value)"@0x%"PRIx64" IRQ 0x%x val=0x%"PRIx64
xive_router_end_notify(uint8_t end_blk, uint32_t end_idx, uint32_t end_data)"END 0x%02x/0x%04x -> enqueue 0x%08x"xive_router_end_escalate(uint8_t end_blk, uint32_t end_idx, uint8_t esc_blk, uint32_t esc_idx, uint32_t end_data)"END 0x%02x/0x%04x -> escalate END 0x%02x/0x%04x data 0x%08x"Quoted 8 lines
-xive_tctx_tm_write(uint64_t offset, unsigned int size,
uint64_tvalue) "@0x%"PRIx64" sz=%d val=0x%" PRIx64 -xive_tctx_tm_read(uint64_t offset, unsigned int size,uint64_tvalue) "@0x%"PRIx64" sz=%d val=0x%" PRIx64 +xive_tctx_tm_write(uint32_t index,uint64_toffset, unsigned int size,uint64_tvalue) "target=%d @0x%"PRIx64" sz=%d val=0x%" PRIx64 +xive_tctx_tm_read(uint32_t index,uint64_toffset, unsigned int size,uint64_tvalue) "target=%d @0x%"PRIx64" sz=%d val=0x%" PRIx64"target" is kinda confusing, what about:
Quoted 7 lines
Quoted 1 line
xive_tctx_tm_read(uint32_t cpu_index, ...)"cpu=%d @0x%"PRIx64" ...An interrupt 'source' is served by a 'target', a target could be a CPU, a vCPU id, a group of vCPU, a process id.
'target' is part of the XIVE nomenclature, in HW specs, in drivers, FW, Linux, KVM, and models in QEMU. It is fine.
Ah OK. Then xive_tctx_tm_read(uint32_t target, ...).
Quoted 31 lines · Philippe Mathieu-Daudé
Quoted 30 lines · Cédric Le Goater
Quoted 28 lines · Philippe Mathieu-Daudé
Quoted 19 lines · Frederic Barrat
Add the CPU target in the trace when reading/writing the TIMA space. It was already done for other TIMA ops (notify, accept, ...), only missing for those 2. Useful for debug and even more now that we experiment with SMT.
Signed-off-by Frederic Barrat <[email protected]>---
hw/intc/trace-events | 4 ++--
hw/intc/xive.c | 4 ++--2 files changed, 4 insertions(+), 4 deletions(-)hw/intc/trace-events +0
-0@@ -265,8 +265,8 @@ xive_source_esb_read(uint64_t addr, uint32_t srcno, uint64_t value) "@0x%"PRIx64
xive_source_esb_write(uint64_t addr, uint32_t srcno, uint64_t value)"@0x%"PRIx64" IRQ 0x%x val=0x%"PRIx64
xive_router_end_notify(uint8_t end_blk, uint32_t end_idx, uint32_t end_data)"END 0x%02x/0x%04x -> enqueue 0x%08x"xive_router_end_escalate(uint8_t end_blk, uint32_t end_idx, uint8_t esc_blk, uint32_t esc_idx, uint32_t end_data)"END 0x%02x/0x%04x -> escalate END 0x%02x/0x%04x data 0x%08x"hw/intc/trace-events xive_source_esb_read(uint64_t addr, uint32_t srcno, uint64_t value) "@0x%"PRIx64 · line 269
Quoted 4 lines
hw/intc/trace-events +2
-2-xive_tctx_tm_write(uint64_t offset, unsigned int size, uint64_t value) "@0x%"PRIx64" sz=%d val=0x%" PRIx64 -xive_tctx_tm_read(uint64_t offset, unsigned int size, uint64_t value) "@0x%"PRIx64" sz=%d val=0x%" PRIx64 +xive_tctx_tm_write(uint32_t index, uint64_t offset, unsigned int size, uint64_t value) "target=%d @0x%"PRIx64" sz=%d val=0x%" PRIx64 +xive_tctx_tm_read(uint32_t index, uint64_t offset, unsigned int size, uint64_t value) "target=%d @0x%"PRIx64" sz=%d val=0x%" PRIx64"target" is kinda confusing, what about:
xive_tctx_tm_read(uint32_t cpu_index, ...)"cpu=%d @0x%"PRIx64" ...
Quoted 7 lines
Quoted 5 lines
An interrupt 'source' is served by a 'target', a target could be a CPU, a vCPU id, a group of vCPU, a process id.
'target' is part of the XIVE nomenclature, in HW specs, in drivers, FW, Linux, KVM, and models in QEMU. It is fine.
Ah OK. Then
xive_tctx_tm_read(uint32_t target, ...).
better indeed. What would be good to know also, is which vCPU is currently dispatched on the HW thread. The info is in W2 of the ring being accessed.
Thanks,
C.
Quoted 6 lines · Frederic Barrat
Add the CPU target in the trace when reading/writing the TIMA space. It was already done for other TIMA ops (notify, accept, ...), only missing for those 2. Useful for debug and even more now that we experiment with SMT.
Signed-off-by Frederic Barrat <[email protected]>
Thanks,
C.
Quoted 42 lines
--- hw/intc/trace-events | 4 ++-- hw/intc/xive.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-)hw/intc/trace-events +2
-2@@ -265,8 +265,8 @@ xive_source_esb_read(uint64_t addr, uint32_t srcno, uint64_t value) "@0x%"PRIx64 xive_source_esb_write(uint64_t addr, uint32_t srcno, uint64_t value) "@0x%"PRIx64" IRQ 0x%x val=0x%"PRIx64 xive_router_end_notify(uint8_t end_blk, uint32_t end_idx, uint32_t end_data) "END 0x%02x/0x%04x -> enqueue 0x%08x" xive_router_end_escalate(uint8_t end_blk, uint32_t end_idx, uint8_t esc_blk, uint32_t esc_idx, uint32_t end_data) "END 0x%02x/0x%04x -> escalate END 0x%02x/0x%04x data 0x%08x" -xive_tctx_tm_write(uint64_t offset, unsigned int size, uint64_t value) "@0x%"PRIx64" sz=%d val=0x%" PRIx64 -xive_tctx_tm_read(uint64_t offset, unsigned int size, uint64_t value) "@0x%"PRIx64" sz=%d val=0x%" PRIx64 +xive_tctx_tm_write(uint32_t index, uint64_t offset, unsigned int size, uint64_t value) "target=%d @0x%"PRIx64" sz=%d val=0x%" PRIx64 +xive_tctx_tm_read(uint32_t index, uint64_t offset, unsigned int size, uint64_t value) "target=%d @0x%"PRIx64" sz=%d val=0x%" PRIx64 xive_presenter_notify(uint8_t nvt_blk, uint32_t nvt_idx, uint8_t ring) "found NVT 0x%x/0x%x ring=0x%x" xive_end_source_read(uint8_t end_blk, uint32_t end_idx, uint64_t addr) "END 0x%x/0x%x @0x%"PRIx64hw/intc/xive.c +2
-2@@ -566,7 +566,7 @@ void xive_tctx_tm_write(XivePresenter *xptr, XiveTCTX *tctx, hwaddr offset, {const XiveTmOp *xto; -trace_xive_tctx_tm_write (offset, size, value); +trace_xive_tctx_tm_write (tctx->cs->cpu_index, offset, size, value);/* * TODO: check V bit in Q[0-3]W2 @@ -639,7 +639,7 @@ uint64_t xive_tctx_tm_read(XivePresenter *xptr, XiveTCTX *tctx, hwaddr offset,*/ ret =xive_tm_raw_read (tctx, offset, size); out: -trace_xive_tctx_tm_read (offset, size, ret); +trace_xive_tctx_tm_read (tctx->cs->cpu_index, offset, size, ret);return ret; }
Daniel Henrique Barboza
AppliedQueued in gitlab.com/danielhb/qemu/tree/ppc-next. Thanks,
Daniel
Quoted 48 lines · Frederic Barrat
Add the CPU target in the trace when reading/writing the TIMA space. It was already done for other TIMA ops (notify, accept, ...), only missing for those 2. Useful for debug and even more now that we experiment with SMT.
Signed-off-by Frederic Barrat <[email protected]>--- hw/intc/trace-events | 4 ++-- hw/intc/xive.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-)hw/intc/trace-events +2
-2@@ -265,8 +265,8 @@ xive_source_esb_read(uint64_t addr, uint32_t srcno, uint64_t value) "@0x%"PRIx64 xive_source_esb_write(uint64_t addr, uint32_t srcno, uint64_t value) "@0x%"PRIx64" IRQ 0x%x val=0x%"PRIx64 xive_router_end_notify(uint8_t end_blk, uint32_t end_idx, uint32_t end_data) "END 0x%02x/0x%04x -> enqueue 0x%08x" xive_router_end_escalate(uint8_t end_blk, uint32_t end_idx, uint8_t esc_blk, uint32_t esc_idx, uint32_t end_data) "END 0x%02x/0x%04x -> escalate END 0x%02x/0x%04x data 0x%08x" -xive_tctx_tm_write(uint64_t offset, unsigned int size, uint64_t value) "@0x%"PRIx64" sz=%d val=0x%" PRIx64 -xive_tctx_tm_read(uint64_t offset, unsigned int size, uint64_t value) "@0x%"PRIx64" sz=%d val=0x%" PRIx64 +xive_tctx_tm_write(uint32_t index, uint64_t offset, unsigned int size, uint64_t value) "target=%d @0x%"PRIx64" sz=%d val=0x%" PRIx64 +xive_tctx_tm_read(uint32_t index, uint64_t offset, unsigned int size, uint64_t value) "target=%d @0x%"PRIx64" sz=%d val=0x%" PRIx64 xive_presenter_notify(uint8_t nvt_blk, uint32_t nvt_idx, uint8_t ring) "found NVT 0x%x/0x%x ring=0x%x" xive_end_source_read(uint8_t end_blk, uint32_t end_idx, uint64_t addr) "END 0x%x/0x%x @0x%"PRIx64hw/intc/xive.c +2
-2@@ -566,7 +566,7 @@ void xive_tctx_tm_write(XivePresenter *xptr, XiveTCTX *tctx, hwaddr offset, {const XiveTmOp *xto; -trace_xive_tctx_tm_write (offset, size, value); +trace_xive_tctx_tm_write (tctx->cs->cpu_index, offset, size, value);/* * TODO: check V bit in Q[0-3]W2 @@ -639,7 +639,7 @@ uint64_t xive_tctx_tm_read(XivePresenter *xptr, XiveTCTX *tctx, hwaddr offset,*/ ret =xive_tm_raw_read (tctx, offset, size); out: -trace_xive_tctx_tm_read (offset, size, ret); +trace_xive_tctx_tm_read (tctx->cs->cpu_index, offset, size, ret);return ret; }