Skip to contentSkip to conversation

Linux 2.6.x wrongly recognizes USB 2.0 DVD writer

DISCUSSION Ganesan R 3 participants 6 messages Oct 14, 2004 – Oct 20, 2004

lore
Share & tools
lore

Ganesan R

author
#0 lore raw

Hi,

I have a NEC ND-2500A DVD writer in a ByteCC USB 2.0 external enclosure. It's recognized perfectly in 2.4.27 (Debian kernel-image-2.4.27-1-686 package)

========
scsi2 : SCSI emulation for USB Mass Storage
Vendor: _NEC Model: DVD_RW ND-2500A
Type: CD-ROM ANSI SCSI revision: 02
Attached scsi CD-ROM sr1 at scsi2, channel 0, id 0, lun 0
sr1: scsi-1 drive
USB Mass Storage support registered.
========

When I boot 2.6.8 (Debian kernel-image-2.6.8-1-686 package), I get

========
scsi3 : SCSI emulation for USB Mass Storage devices
Vendor: Revoltec Model: USB/IDE Bridge ( Rev: 0103
Type: Direct-Access ANSI SCSI revision: 02
Attached scsi removable disk sdb at scsi3, channel 0, id 0, lun 0 USB Mass Storage device found at 4
========

Any body else facing this problem?

Ganesan

#1 lore raw

Ganesan> I have a NEC ND-2500A DVD writer in a ByteCC USB 2.0 external Ganesan> enclosure. It's recognized perfectly in 2.4.27 (Debian Ganesan> kernel-image-2.4.27-1-686 package)

I've got a ByteCC external enclosure too, and I can't get it to work reliably under Linux or Windows under Firewire. I'd return it and get something better.

Also, the 2.6 ieee1394 sbp2 driver isn't the best at detecting these things. And if it does, it doesn't always work well with drives in there as well. I've been having tons of problems and I basically gave up.

John

author
#2 lore raw
Quoted 8 lines · John Stoffel

Ganesan> I have a NEC ND-2500A DVD writer in a ByteCC USB 2.0 external Ganesan> enclosure. It's recognized perfectly in 2.4.27 (Debian Ganesan> kernel-image-2.4.27-1-686 package)

I've got a ByteCC external enclosure too, and I can't get it to work reliably under Linux or Windows under Firewire. I'd return it and get something better.

Thanks for the info. As I mentioned, the enclosure works flawlessly for me under 2.4.27. It's getting detected incorrectly only in 2.6.x. Another user reported a similar problem but was able to get dvd burning working by removing the checks from the writing tool. So, it looks like detection has been messed up only in 2.6.x.

Once again, 2.6.8 reports it as

======
scsi3 : SCSI emulation for USB Mass Storage devices
Vendor: Revoltec Model: USB/IDE Bridge ( Rev: 0103
Type: Direct-Access ANSI SCSI revision: 02
Attached scsi removable disk sdb at scsi3, channel 0, id 0, lun 0
======

whereas 2.4.27 correctly reports

======== scsi2 : SCSI emulation for USB Mass Storage
Vendor: _NEC Model: DVD_RW ND-2500A
Type: CD-ROM ANSI SCSI revision: 02
Attached scsi CD-ROM sr1 at scsi2, channel 0, id 0, lun 0 sr1: scsi-1 drive USB Mass Storage support registered. ========

I checked the kernel sources. Sure enough, drivers/usb/storage/unusual_devs.h has a new entry in the 2.6 tree:

========
/* <[email protected]>: I don't know the name of the bridge
* manufacturer, but I've got an external USB drive by the Revoltec company
* that needs this. otherwise the drive is recognized as /dev/sda, but any
* access to it blocks indefinitely.
*/
UNUSUAL_DEV( 0x0402, 0x5621, 0x0103, 0x0103,
"Revoltec",
"USB/IDE Bridge (ATA/ATAPI)",
US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY),
========

I have not yet tested after removing this entry, but this looks to be the likely problem. The enclosure actually supports both 3.5 IDE hard disks as well as 5.25 CD/DVD drives. I have no clue why this entry should cause the drive to be wrongly detected. CCing linux-usb-devel for help.

Please CC me on replies to linux-usb-devel since I am not subscribed to that list. Thanks.

Ganesan

#3 lore raw

Ganesan> Thanks for the info. As I mentioned, the enclosure works Ganesan> flawlessly for me under 2.4.27. It's getting detected Ganesan> incorrectly only in 2.6.x. Another user reported a similar Ganesan> problem but was able to get dvd burning working by removing Ganesan> the checks from the writing tool. So, it looks like detection Ganesan> has been messed up only in 2.6.x.

I'm an idiot. I mis-read your initial post thinking it was like my ByteCC which has the dual Firewire/USB ports and since I can't get EITHER interface type to work reliablely, I've given up on it for now.

What's the output of 'lsusb'? You want to see what the vendor/product ID is as a comparison. I should check mine again under USB and see what happens under 2.6.8, though earlier it would just hang the entire system after copying a GB or two of data. At least under FireWire when it hung, I could recover the system without having to reboot.

Gah... time for more caffeine.

#4 lore raw
In reply to Ganesan R
Quoted 42 lines · Ganesan R

Thanks for the info. As I mentioned, the enclosure works flawlessly for me under 2.4.27. It's getting detected incorrectly only in 2.6.x. Another user reported a similar problem but was able to get dvd burning working by removing the checks from the writing tool. So, it looks like detection has been messed up only in 2.6.x.

Once again, 2.6.8 reports it as

======
scsi3 : SCSI emulation for USB Mass Storage devices
Vendor: Revoltec Model: USB/IDE Bridge ( Rev: 0103
Type: Direct-Access ANSI SCSI revision: 02
Attached scsi removable disk sdb at scsi3, channel 0, id 0, lun 0
======

whereas 2.4.27 correctly reports

========
scsi2 : SCSI emulation for USB Mass Storage
Vendor: _NEC Model: DVD_RW ND-2500A
Type: CD-ROM ANSI SCSI revision: 02
Attached scsi CD-ROM sr1 at scsi2, channel 0, id 0, lun 0
sr1: scsi-1 drive
USB Mass Storage support registered.
========

I checked the kernel sources. Sure enough,
drivers/usb/storage/unusual_devs.h
has a new entry in the 2.6 tree:

========
/* <[email protected]>: I don't know the name of the bridge
* manufacturer, but I've got an external USB drive by the Revoltec company
* that needs this. otherwise the drive is recognized as /dev/sda, but any
* access to it blocks indefinitely.
*/
UNUSUAL_DEV( 0x0402, 0x5621, 0x0103, 0x0103,
"Revoltec",
"USB/IDE Bridge (ATA/ATAPI)",
US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY),
========

Quoted 5 lines

I have not yet tested after removing this entry, but this looks to be the likely problem. The enclosure actually supports both 3.5 IDE hard disks as well as 5.25 CD/DVD drives. I have no clue why this entry should cause the drive to be wrongly detected. CCing linux-usb-devel for help.

Certainly that entry is the problem. It has been removed in the latest development kernels; it may already be gone in 2.6.9-rc4.

Alan Stern

author
#5 lore raw

Re: [linux-usb-devel] Re: Linux 2.6.x wrongly recognizes USB 2.0 DVD writer (solved)

Quoted 19 lines · Alan Stern
Quoted 17 lines · Ganesan R

I checked the kernel sources. Sure enough,
drivers/usb/storage/unusual_devs.h
has a new entry in the 2.6 tree:

========
/* <[email protected]>: I don't know the name of the bridge
* manufacturer, but I've got an external USB drive by the Revoltec company
* that needs this. otherwise the drive is recognized as /dev/sda, but any
* access to it blocks indefinitely.
*/
UNUSUAL_DEV( 0x0402, 0x5621, 0x0103, 0x0103,
"Revoltec",
"USB/IDE Bridge (ATA/ATAPI)",
US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY),
========

Quoted 8 lines
Quoted 5 lines

I have not yet tested after removing this entry, but this looks to be the likely problem. The enclosure actually supports both 3.5 IDE hard disks as well as 5.25 CD/DVD drives. I have no clue why this entry should cause the drive to be wrongly detected. CCing linux-usb-devel for help.

Certainly that entry is the problem. It has been removed in the latest development kernels; it may already be gone in 2.6.9-rc4.

I removed that entry and recompiled 2.6.8. The drive is now recognized properly again in 2.6.8. Thanks to every one who helped.

Ganesan