Skip to contentSkip to conversation

Acerhdf: fix fan control for AOA150 model

PATCH In review Peter Feuerer 3 participants 4 messages Jul 12, 2009 – Jul 15, 2009

Subsystems (2)
lore
Share & tools
lore

Peter Feuerer

author maintainer
#0 lore raw

PATCH 1/1 Acerhdf: fix fan control for AOA150 model

Hi Len,

please apply,

Signature · 14 lines
	peter

Changed:
 o Applied Borislav Petkov's patch (convert the fancmd[] array to a real 
   struct thus disambiguating command handling and making code more readable.)
 o Added BIOS product to BIOS table as AOA110 and AOA150 have
   different register values
 o Added force_product parameter to allow forcing different
   product
 o fixed linker warning caused by "acerhdf_drv" not being named
   "acerhdf_driver"

Signed-off-by: Peter Feuerer <[email protected]>
---
drivers/platform/x86/acerhdf.c +66 -31
index bdfee17..aa298d6 100644
@@ -52,7 +52,7 @@
  */
 #undef START_IN_KERNEL_MODE
 
-#define DRV_VER "0.5.13"
+#define DRV_VER "0.5.16"
 
 /*
  * According to the Atom N270 datasheet,
@@ -90,6 +90,7 @@ static unsigned int fanoff = 58;
 static unsigned int verbose;
 static unsigned int fanstate = ACERHDF_FAN_AUTO;
 static char force_bios[16];
+static char force_product[16];
 static unsigned int prev_interval;
 struct thermal_zone_device *thz_dev;
 struct thermal_cooling_device *cl_dev;
@@ -107,34 +108,58 @@ module_param(verbose, uint, 0600);
 MODULE_PARM_DESC(verbose, "Enable verbose dmesg output");
 module_param_string(force_bios, force_bios, 16, 0);
 MODULE_PARM_DESC(force_bios, "Force BIOS version and omit BIOS check");
+module_param_string(force_product, force_product, 16, 0);
+MODULE_PARM_DESC(force_product, "Force BIOS product and omit BIOS check");
+
+/*
+ * cmd_off: to switch the fan completely off / to check if the fan is off
+ *	cmd_auto: to set the BIOS in control of the fan. The BIOS regulates then
+ *		the fan speed depending on the temperature
+ */
+struct fancmd {
+	u8 cmd_off;
+	u8 cmd_auto;
+};
 
 /* BIOS settings */
 struct bios_settings_t {
 	const char *vendor;
+	const char *product;
 	const char *version;
 	unsigned char fanreg;
 	unsigned char tempreg;
-	unsigned char fancmd[2]; /* fan off and auto commands */
+	struct fancmd cmd;
 };
 
 /* Register addresses and values for different BIOS versions */
 static const struct bios_settings_t bios_tbl[] = {
-	{"Acer", "v0.3109", 0x55, 0x58, {0x1f, 0x00} },
-	{"Acer", "v0.3114", 0x55, 0x58, {0x1f, 0x00} },
-	{"Acer", "v0.3301", 0x55, 0x58, {0xaf, 0x00} },
-	{"Acer", "v0.3304", 0x55, 0x58, {0xaf, 0x00} },
-	{"Acer", "v0.3305", 0x55, 0x58, {0xaf, 0x00} },
-	{"Acer", "v0.3308", 0x55, 0x58, {0x21, 0x00} },
-	{"Acer", "v0.3309", 0x55, 0x58, {0x21, 0x00} },
-	{"Acer", "v0.3310", 0x55, 0x58, {0x21, 0x00} },
-	{"Gateway", "v0.3103", 0x55, 0x58, {0x21, 0x00} },
-	{"Packard Bell", "v0.3105", 0x55, 0x58, {0x21, 0x00} },
-	{"", "", 0, 0, {0, 0} }
+	/* AOA110 */
+	{"Acer", "AOA110", "v0.3109", 0x55, 0x58, {0x1f, 0x00} },
+	{"Acer", "AOA110", "v0.3114", 0x55, 0x58, {0x1f, 0x00} },
+	{"Acer", "AOA110", "v0.3301", 0x55, 0x58, {0xaf, 0x00} },
+	{"Acer", "AOA110", "v0.3304", 0x55, 0x58, {0xaf, 0x00} },
+	{"Acer", "AOA110", "v0.3305", 0x55, 0x58, {0xaf, 0x00} },
+	{"Acer", "AOA110", "v0.3308", 0x55, 0x58, {0x21, 0x00} },
+	{"Acer", "AOA110", "v0.3309", 0x55, 0x58, {0x21, 0x00} },
+	{"Acer", "AOA110", "v0.3310", 0x55, 0x58, {0x21, 0x00} },
+	/* AOA150 */
+	{"Acer", "AOA150", "v0.3114", 0x55, 0x58, {0x20, 0x00} },
+	{"Acer", "AOA150", "v0.3304", 0x55, 0x58, {0x20, 0x00} },
+	{"Acer", "AOA150", "v0.3305", 0x55, 0x58, {0x20, 0x00} },
+	{"Acer", "AOA150", "v0.3308", 0x55, 0x58, {0x20, 0x00} },
+	{"Acer", "AOA150", "v0.3309", 0x55, 0x58, {0x20, 0x00} },
+	{"Acer", "AOA150", "v0.3310", 0x55, 0x58, {0x20, 0x00} },
+	/* special BIOS / other */
+	{"Gateway", "AOA110", "v0.3103", 0x55, 0x58, {0x21, 0x00} },
+	{"Gateway", "AOA150", "v0.3103", 0x55, 0x58, {0x20, 0x00} },
+	{"Packard Bell", "DOA150", "v0.3104", 0x55, 0x58, {0x21, 0x00} },
+	{"Packard Bell", "AOA110", "v0.3105", 0x55, 0x58, {0x21, 0x00} },
+	/* pewpew-terminator */
+	{"", "", "", 0, 0, {0, 0} }
 };
 
 static const struct bios_settings_t *bios_cfg __read_mostly;
 
-
 static int acerhdf_get_temp(int *temp)
 {
 	u8 read_temp;
@@ -150,13 +175,14 @@ static int acerhdf_get_temp(int *temp)
 static int acerhdf_get_fanstate(int *state)
 {
 	u8 fan;
-	bool tmp;
 
 	if (ec_read(bios_cfg->fanreg, &fan))
 		return -EINVAL;
 
-	tmp = (fan == bios_cfg->fancmd[ACERHDF_FAN_OFF]);
-	*state = tmp ? ACERHDF_FAN_OFF : ACERHDF_FAN_AUTO;
+	if (fan != bios_cfg->cmd.cmd_off)
+		*state = ACERHDF_FAN_AUTO;
+	else
+		*state = ACERHDF_FAN_OFF;
 
 	return 0;
 }
@@ -175,7 +201,8 @@ static void acerhdf_change_fanstate(int state)
 		state = ACERHDF_FAN_AUTO;
 	}
 
-	cmd = bios_cfg->fancmd[state];
+	cmd = (state == ACERHDF_FAN_OFF) ? bios_cfg->cmd.cmd_off
+					 : bios_cfg->cmd.cmd_auto;
 	fanstate = state;
 
 	ec_write(bios_cfg->fanreg, cmd);
@@ -437,7 +464,7 @@ static int acerhdf_remove(struct platform_device *device)
 	return 0;
 }
 
-struct platform_driver acerhdf_drv = {
+static struct platform_driver acerhdf_driver = {
 	.driver = {
 		.name = "acerhdf",
 		.owner = THIS_MODULE,
@@ -454,32 +481,40 @@ static int acerhdf_check_hardware(void)
 {
 	char const *vendor, *version, *product;
 	int i;
+	unsigned long prod_len = 0;
 
 	/* get BIOS data */
 	vendor  = dmi_get_system_info(DMI_SYS_VENDOR);
 	version = dmi_get_system_info(DMI_BIOS_VERSION);
 	product = dmi_get_system_info(DMI_PRODUCT_NAME);
 
+
 	pr_info("Acer Aspire One Fan driver, v.%s\n", DRV_VER);
 
-	if (!force_bios[0]) {
-		if (strncmp(product, "AO", 2)) {
-			pr_err("no Aspire One hardware found\n");
-			return -EINVAL;
-		}
-	} else {
-		pr_info("forcing BIOS version: %s\n", version);
+	if (force_bios[0]) {
 		version = force_bios;
+		pr_info("forcing BIOS version: %s\n", version);
 		kernelmode = 0;
 	}
 
+	if (force_product[0]) {
+		product = force_product;
+		pr_info("forcing BIOS product: %s\n", product);
+		kernelmode = 0;
+	}
+
+	prod_len = strlen(product);
+
 	if (verbose)
 		pr_info("BIOS info: %s %s, product: %s\n",
 			vendor, version, product);
 
 	/* search BIOS version and vendor in BIOS settings table */
 	for (i = 0; bios_tbl[i].version[0]; i++) {
-		if (!strcmp(bios_tbl[i].vendor, vendor) &&
+		if (strlen(bios_tbl[i].product) >= prod_len &&
+		    !strncmp(bios_tbl[i].product, product,
+			   strlen(bios_tbl[i].product)) &&
+		    !strcmp(bios_tbl[i].vendor, vendor) &&
 		    !strcmp(bios_tbl[i].version, version)) {
 			bios_cfg = &bios_tbl[i];
 			break;
@@ -487,8 +522,8 @@ static int acerhdf_check_hardware(void)
 	}
 
 	if (!bios_cfg) {
-		pr_err("unknown (unsupported) BIOS version %s/%s, "
-			"please report, aborting!\n", vendor, version);
+		pr_err("unknown (unsupported) BIOS version %s/%s/%s, "
+			"please report, aborting!\n", vendor, product, version);
 		return -EINVAL;
 	}
 
@@ -509,7 +544,7 @@ static int acerhdf_register_platform(void)
 {
 	int err = 0;
 
-	err = platform_driver_register(&acerhdf_drv);
+	err = platform_driver_register(&acerhdf_driver);
 	if (err)
 		return err;
 
@@ -525,7 +560,7 @@ static void acerhdf_unregister_platform(void)
 		return;
 
 	platform_device_del(acerhdf_dev);
-	platform_driver_unregister(&acerhdf_drv);
+	platform_driver_unregister(&acerhdf_driver);
 }
 
 static int acerhdf_register_thermal(void)
#1 lore raw
Quoted 18 lines · On Sun, 12 Jul 2009 23:21:04 +0200 Peter Feuerer <[email protected]> wrote:

Hi Len,

please apply,

Signature · 13 lines
	peter

Changed:
 o Applied Borislav Petkov's patch (convert the fancmd[] array to a real 
   struct thus disambiguating command handling and making code more readable.)
 o Added BIOS product to BIOS table as AOA110 and AOA150 have
   different register values
 o Added force_product parameter to allow forcing different
   product
 o fixed linker warning caused by "acerhdf_drv" not being named
   "acerhdf_driver"

Signed-off-by: Peter Feuerer <[email protected]>

It looks like this work should have been presented as four separate patches.

Inclusion of Borislav's Signed-off-by: would be appropriate.

author maintainer
#2 lore raw

Hi Andrew,

Quoted 2 lines · Andrew Morton

On Sun, 12 Jul 2009 23:21:04 +0200
Peter Feuerer <[email protected]> wrote:

…

Quoted 10 lines
Quoted 10 lines

Changed:
o Applied Borislav Petkov's patch (convert the fancmd[] array to a real struct thus disambiguating command handling and making code more readable.)
o Added BIOS product to BIOS table as AOA110 and AOA150 have different register values
o Added force_product parameter to allow forcing different product
o fixed linker warning caused by "acerhdf_drv" not being named "acerhdf_driver"

Quoted 3 lines
Quoted 1 line

It looks like this work should have been presented as four separate patches.

I'm not that familiar with git in general and sending patches yet. How do you do this in an effective way? Diffing all changes via git and then splitting up the "all-in-one-patch" to four smaller patches manually?

Quoted 1 line

Inclusion of Borislav's Signed-off-by: would be appropriate.

I wasn't sure whether I'm allowed to send the patch with his signed-off, as there were other things in the patch, he didn't review. But next time I'll send such a patch splitted up and then it's clear.

Thanks for your honesty,
kind regards,
--peter

#3 lore raw
Quoted 18 lines · Peter Feuerer

Hi Andrew,

Quoted 2 lines · Andrew Morton

On Sun, 12 Jul 2009 23:21:04 +0200
Peter Feuerer <[email protected]> wrote:

…

Quoted 11 lines
Quoted 11 lines

Changed:
o Applied Borislav Petkov's patch (convert the fancmd[] array
to a real struct thus disambiguating command handling and
making code more readable.)
o Added BIOS product to BIOS table as AOA110 and AOA150 have different register values
o Added force_product parameter to allow forcing different product
o fixed linker warning caused by "acerhdf_drv" not being named "acerhdf_driver"

Quoted 8 lines
Quoted 3 lines
Quoted 1 line

It looks like this work should have been presented as four separate patches.

I'm not that familiar with git in general and sending patches yet. How do you do this in an effective way? Diffing all changes via git and then splitting up the "all-in-one-patch" to four smaller patches manually?

Here's a very fine reading how to do stuff with git:

http://www.kernel.org/pub/software/scm/git/docs/user-manual.html

Quoted 6 lines
Quoted 1 line

Inclusion of Borislav's Signed-off-by: would be appropriate.

I wasn't sure whether I'm allowed to send the patch with his signed-off, as there were other things in the patch, he didn't review. But next time I'll send such a patch splitted up and then it's clear.

Normally, one S-O-B in a multi-S-O-B patch refers only to the bits that single author has changed. In case you want to say that only a subset of the changes are originating from one person, you can mention that in the commit message, something along the lines of

"... patch based loosely on work by... " or similar.

By the way, your patch works fine here:

Signature · 2 lines
Regards/Gruss,
    Boris.