Skip to contentSkip to conversation

mx25: add iomux defines

PATCH New Baruch Siach 1 participant 3 messages Jun 24, 2010

Subsystems (3)
Arm (32-bit) Arm sub-architectures Arm i.MX and Layerscape
lore
Share & tools
lore

Baruch Siach

author
#0 lore raw

cover mx25: add iomux defines

This series adds some iomux defines needed for the UART4 and the PWM4 devices.

This version applies to current imx-for-2.6.36.

Baruch Siach (2):
mx25: add iomux defines for UART4 on KPP pins
mx25: add PWM4 to iomux

 arch/arm/plat-mxc/include/mach/iomux-mx25.h |    5 +++++
 1 files changed, 5 insertions(+), 0 deletions(-)
author
#1 lore raw

PATCH 1/2 mx25: add iomux defines for UART4 on KPP pins

Signed-off-by Baruch Siach <[email protected]>
---
 arch/arm/plat-mxc/include/mach/iomux-mx25.h |    4 ++++
 1 files changed, 4 insertions(+), 0 deletions(-)
arch/arm/plat-mxc/include/mach/iomux-mx25.h +4 -0
index 5bea603..cbc67c7 100644
@@ -386,18 +386,22 @@
 #define MX25_PAD_KPP_ROW3__GPIO_3_0	IOMUX_PAD(0x3ac, 0x1b4, 0x15, 0, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_KPP_COL0__KPP_COL0	IOMUX_PAD(0x3b0, 0x1b8, 0x10, 0, 0, PAD_CTL_PKE | PAD_CTL_ODE)
+#define MX25_PAD_KPP_COL0__UART4_RXD_MUX IOMUX_PAD(0x3b0, 0x1b8, 0x11, 0x570, 1, NO_PAD_CTRL)
 #define MX25_PAD_KPP_COL0__AUD5_TXD	IOMUX_PAD(0x3b0, 0x1b8, 0x12, 0, 0, PAD_CTL_PKE | PAD_CTL_PUS_100K_UP)
 #define MX25_PAD_KPP_COL0__GPIO_3_1	IOMUX_PAD(0x3b0, 0x1b8, 0x15, 0, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_KPP_COL1__KPP_COL1	IOMUX_PAD(0x3b4, 0x1bc, 0x10, 0, 0, PAD_CTL_PKE | PAD_CTL_ODE)
+#define MX25_PAD_KPP_COL1__UART4_TXD_MUX IOMUX_PAD(0x3b4, 0x1bc, 0x11, 0, 0, NO_PAD_CTRL)
 #define MX25_PAD_KPP_COL1__AUD5_RXD	IOMUX_PAD(0x3b4, 0x1bc, 0x12, 0, 0, PAD_CTL_PKE | PAD_CTL_PUS_100K_UP)
 #define MX25_PAD_KPP_COL1__GPIO_3_2	IOMUX_PAD(0x3b4, 0x1bc, 0x15, 0, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_KPP_COL2__KPP_COL2	IOMUX_PAD(0x3b8, 0x1c0, 0x10, 0, 0, PAD_CTL_PKE | PAD_CTL_ODE)
+#define MX25_PAD_KPP_COL2__UART4_RTS	IOMUX_PAD(0x3b8, 0x1c0, 0x11, 0, 0, NO_PAD_CTRL)
 #define MX25_PAD_KPP_COL2__AUD5_TXC	IOMUX_PAD(0x3b8, 0x1c0, 0x12, 0, 0, PAD_CTL_PKE | PAD_CTL_PUS_100K_UP)
 #define MX25_PAD_KPP_COL2__GPIO_3_3	IOMUX_PAD(0x3b8, 0x1c0, 0x15, 0, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_KPP_COL3__KPP_COL3	IOMUX_PAD(0x3bc, 0x1c4, 0x10, 0, 0, PAD_CTL_PKE | PAD_CTL_ODE)
+#define MX25_PAD_KPP_COL3__UART4_CTS	IOMUX_PAD(0x3bc, 0x1c4, 0x11, 0, 0, NO_PAD_CTRL)
 #define MX25_PAD_KPP_COL3__AUD5_TXFS	IOMUX_PAD(0x3bc, 0x1c4, 0x12, 0, 0, PAD_CTL_PKE | PAD_CTL_PUS_100K_UP)
 #define MX25_PAD_KPP_COL3__GPIO_3_4	IOMUX_PAD(0x3bc, 0x1c4, 0x15, 0, 0, NO_PAD_CTRL)
Signature · 1 line
1.7.1
author
#2 lore raw

PATCH 2/2 mx25: add PWM4 to iomux

In reply to Baruch Siach
Signed-off-by Baruch Siach <[email protected]>
---
 arch/arm/plat-mxc/include/mach/iomux-mx25.h |    1 +
 1 files changed, 1 insertions(+), 0 deletions(-)
arch/arm/plat-mxc/include/mach/iomux-mx25.h +1 -0
index cbc67c7..593c47c 100644
@@ -252,6 +252,7 @@
 #define MX25_PAD_OE_ACD__GPIO_1_25	IOMUX_PAD(0x30c, 0x114, 0x15, 0, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_CONTRAST__CONTRAST	IOMUX_PAD(0x310, 0x118, 0x10, 0, 0, NO_PAD_CTRL)
+#define MX25_PAD_CONTRAST__PWM4_PWMO	IOMUX_PAD(0x310, 0x118, 0x14, 0, 0, NO_PAD_CTRL)
 #define MX25_PAD_CONTRAST__FEC_CRS	IOMUX_PAD(0x310, 0x118, 0x15, 0x508, 1, NO_PAD_CTRL)
 
 #define MX25_PAD_PWM__PWM		IOMUX_PAD(0x314, 0x11c, 0x10, 0, 0, NO_PAD_CTRL)
Signature · 1 line
1.7.1