qemuimagetest: Use same image during sanity testing
cover qemuimagetest: Use same image during sanity testing
To reduce the time on sanity testing, we remove variable SHARE_IMAGE and use a new variable TEST_SERIALIZE in local.conf. It is by default set to 1. Poky will copy and boot the to-be tested image for only once. It will not remove or kill the image and test cases will be serialized executed against the same image. If it is set to 0, image is always be copied for each cases, which takes much time. I had a experiment that latest qemuppc sato only takes 7 minutes to finish 9 sanity test cases, which takes more than 20 minutes before.
I also removed sanity case "boot" for target sato/sdk/lsb because the other cases for these targets already cover the check point of "boot".
Pull URL: git://git.pokylinux.org/poky-contrib.git
Branch: jxu49/master
Browse: http://git.pokylinux.org/cgit.cgi/poky-contrib/log/?h=jxu49/master
Thanks,
Jiajun Xu <[email protected]>
---
Jiajun Xu (1):
qemuimagetest: Use same image during sanity testing instead of
copying a new image for each case
meta/classes/imagetest-qemu.bbclass | 33 +++++- meta/conf/local.conf.sample | 10 +- scripts/qemuimage-testlib | 110 ++++++++++++++------ scripts/qemuimage-tests/sanity/compiler | 2 +- scripts/qemuimage-tests/sanity/connman | 2 +- scripts/qemuimage-tests/sanity/dmesg | 2 +- scripts/qemuimage-tests/sanity/rpm_query | 2 +- scripts/qemuimage-tests/sanity/scp | 2 +- scripts/qemuimage-tests/sanity/shutdown | 11 +- scripts/qemuimage-tests/sanity/ssh | 2 +- scripts/qemuimage-tests/sanity/zypper_help | 2 +- scripts/qemuimage-tests/sanity/zypper_search | 2 +- .../scenario/qemuarm/poky-image-lsb | 3 +- .../scenario/qemuarm/poky-image-sato | 3 +- .../scenario/qemuarm/poky-image-sdk | 3 +- .../scenario/qemumips/poky-image-lsb | 3 +- .../scenario/qemumips/poky-image-sato | 3 +- .../scenario/qemumips/poky-image-sdk | 3 +- .../scenario/qemuppc/poky-image-lsb | 3 +- .../scenario/qemuppc/poky-image-sato | 3 +- .../scenario/qemuppc/poky-image-sdk | 3 +- .../scenario/qemux86-64/poky-image-lsb | 3 +- .../scenario/qemux86-64/poky-image-sato | 3 +- .../scenario/qemux86-64/poky-image-sdk | 3 +- .../scenario/qemux86/poky-image-lsb | 3 +- .../scenario/qemux86/poky-image-sato | 3 +- .../scenario/qemux86/poky-image-sdk | 3 +- 27 files changed, 138 insertions(+), 87 deletions(-)
PATCH 1/1 qemuimagetest: Use same image during sanity testing instead of copying a new image for each case
To reduce the time on sanity testing, we remove variable SHARE_IMAGE and use a new variable TEST_SERIALIZE in local.conf. It is by default set to 1. Poky will copy and boot the to-be tested image for only once. It will not remove or kill the image and test cases will be serialized executed against the same image. If it is set to 0, image is always be copied for each cases, which takes much time. I had a experiment that latest qemuppc sato only takes 7 minutes to finish 9 sanity test cases, which takes more than 20 minutes before.
I also removed sanity case "boot" from sato/sdk/lsb because the other cases for these targets already cover the check point of "boot".
Signed-off-by Jiajun Xu <[email protected]>
--- meta/classes/imagetest-qemu.bbclass | 33 +++++- meta/conf/local.conf.sample | 10 +- scripts/qemuimage-testlib | 110 ++++++++++++++------ scripts/qemuimage-tests/sanity/compiler | 2 +- scripts/qemuimage-tests/sanity/connman | 2 +- scripts/qemuimage-tests/sanity/dmesg | 2 +- scripts/qemuimage-tests/sanity/rpm_query | 2 +- scripts/qemuimage-tests/sanity/scp | 2 +- scripts/qemuimage-tests/sanity/shutdown | 11 +- scripts/qemuimage-tests/sanity/ssh | 2 +- scripts/qemuimage-tests/sanity/zypper_help | 2 +- scripts/qemuimage-tests/sanity/zypper_search | 2 +- .../scenario/qemuarm/poky-image-lsb | 3 +- .../scenario/qemuarm/poky-image-sato | 3 +- .../scenario/qemuarm/poky-image-sdk | 3 +- .../scenario/qemumips/poky-image-lsb | 3 +- .../scenario/qemumips/poky-image-sato | 3 +- .../scenario/qemumips/poky-image-sdk | 3 +- .../scenario/qemuppc/poky-image-lsb | 3 +- .../scenario/qemuppc/poky-image-sato | 3 +- .../scenario/qemuppc/poky-image-sdk | 3 +- .../scenario/qemux86-64/poky-image-lsb | 3 +- .../scenario/qemux86-64/poky-image-sato | 3 +- .../scenario/qemux86-64/poky-image-sdk | 3 +- .../scenario/qemux86/poky-image-lsb | 3 +- .../scenario/qemux86/poky-image-sato | 3 +- .../scenario/qemux86/poky-image-sdk | 3 +- 27 files changed, 138 insertions(+), 87 deletions(-)
meta/classes/imagetest-qemu.bbclass +28 -5
@@ -5,7 +5,9 @@ TEST_LOG ?= "${LOG_DIR}/qemuimagetests" TEST_RESULT ?= "${TEST_DIR}/result" TEST_TMP ?= "${TEST_DIR}/tmp" TEST_SCEN ?= "sanity" -SHARE_IMAGE ?= "1" +TEST_STATUS ?= "${TEST_TMP}/status" +TARGET_IPSAVE ?= "${TEST_TMP}/target_ip" +TEST_SERIALIZE ?= "1" python do_qemuimagetest() { qemuimagetest_main(d)
@@ -35,6 +37,17 @@ def qemuimagetest_main(d): machine = bb.data.getVar('MACHINE', d, 1) pname = bb.data.getVar('PN', d, 1) + """function to save test cases running status""" + def teststatus(test, status, index, length): + test_status = bb.data.getVar('TEST_STATUS', d, 1) + if not os.path.exists(test_status): + raise bb.build.FuncFailed("No test status file existing under TEST_TMP") + + f = open(test_status, "w") + f.write("\t%-15s%-15s%-15s%-15s\n" % ("Case", "Status", "Number", "Total")) + f.write("\t%-15s%-15s%-15s%-15s\n" % (case, status, index, length)) + f.close() + """funtion to run each case under scenario""" def runtest(scen, case, fulltestpath): resultpath = bb.data.getVar('TEST_RESULT', d, 1)
@@ -56,11 +69,13 @@ def qemuimagetest_main(d): os.environ["DISPLAY"] = bb.data.getVar("DISPLAY", d, True) os.environ["POKYBASE"] = bb.data.getVar("POKYBASE", d, True) os.environ["TOPDIR"] = bb.data.getVar("TOPDIR", d, True) - os.environ["SHARE_IMAGE"] = bb.data.getVar("SHARE_IMAGE", d, True) + os.environ["TEST_STATUS"] = bb.data.getVar("TEST_STATUS", d, True) + os.environ["TARGET_IPSAVE"] = bb.data.getVar("TARGET_IPSAVE", d, True) + os.environ["TEST_SERIALIZE"] = bb.data.getVar("TEST_SERIALIZE", d, True) """run Test Case""" bb.note("Run %s test in scenario %s" % (case, scen)) - os.system("%s | tee -a %s" % (fulltestpath, caselog)) + os.system("%s" % fulltestpath) """Generate testcase list in runtime""" def generate_list(testlist):
@@ -119,7 +134,13 @@ def qemuimagetest_main(d): tmppath = bb.data.getVar('TEST_TMP', d, 1) bb.utils.mkdirhier(tmppath) - + + """initialize test status file""" + test_status = bb.data.getVar('TEST_STATUS', d, 1) + if os.path.exists(test_status): + os.remove(test_status) + os.system("touch %s" % test_status) + """initialize result file""" resultpath = bb.data.getVar('TEST_RESULT', d, 1) bb.utils.mkdirhier(resultpath)
@@ -142,9 +163,11 @@ def qemuimagetest_main(d): fulllist = generate_list(testlist) """Begin testing""" - for test in fulllist: + for index,test in enumerate(fulllist): (scen, case, fullpath) = test + teststatus(case, "running", index, (len(fulllist) - 1)) runtest(scen, case, fullpath) + teststatus(case, "finished", index, (len(fulllist) - 1)) """Print Test Result""" ret = 0
meta/conf/local.conf.sample +5 -5
@@ -158,11 +158,11 @@ ENABLE_BINARY_LOCALE_GENERATION = "1" #Because of the QEMU booting slowness issue(see bug #646 and #618), autobuilder #may suffer a timeout issue when running sanity test. We introduce variable -#SHARE_IMAGE here to fix the issue. It is by default set to 1. Poky will copy -#latest built-out image and keep using it in sanity testing. If it is set to 0, -#latest built-out image will be copied and tested for each case, which will take -#much time. -#SHARE_IMAGE = "1" +#TEST_SERIALIZE here to reduce the time on sanity test. It is by default set +#to 1. Poky will start image and run cases in the same image without reboot +#or kill. If it is set to 0, the image will be copied and tested for each +#case, which will take much time. +#TEST_SERIALIZE = "1" # Set GLIBC_GENERATE_LOCALES to the locales you wish to generate should you not # wish to perform the time-consuming step of generating all LIBC locales.
scripts/qemuimage-testlib +76 -34
175 lines not on this page · raw message
scripts/qemuimage-tests/sanity/compiler +1 -1
@@ -11,7 +11,7 @@ . $POKYBASE/scripts/qemuimage-testlib -TIMEOUT=200 +TIMEOUT=400 RET=1 # Start qemu and check its network
scripts/qemuimage-tests/sanity/connman +1 -1
@@ -11,7 +11,7 @@ . $POKYBASE/scripts/qemuimage-testlib -TIMEOUT=200 +TIMEOUT=400 RET=1 # Start qemu and check its network
scripts/qemuimage-tests/sanity/dmesg +1 -1
@@ -11,7 +11,7 @@ . $POKYBASE/scripts/qemuimage-testlib -TIMEOUT=200 +TIMEOUT=400 RET=1 # Start qemu and check its network
scripts/qemuimage-tests/sanity/rpm_query +1 -1
@@ -11,7 +11,7 @@ . $POKYBASE/scripts/qemuimage-testlib -TIMEOUT=200 +TIMEOUT=400 RET=1 # Start qemu and check its network
scripts/qemuimage-tests/sanity/scp +1 -1
@@ -11,7 +11,7 @@ . $POKYBASE/scripts/qemuimage-testlib -TIMEOUT=200 +TIMEOUT=400 RET=1 SPID=0 i=0
scripts/qemuimage-tests/sanity/shutdown +6 -5
@@ -13,11 +13,7 @@ . $POKYBASE/scripts/qemuimage-testlib -if [ $SHARE_IMAGE -eq 0 ]; then - TIMEOUT=200 -elif [ $SHARE_IMAGE -eq 1 ]; then - TIMEOUT=500 -fi +TIMEOUT=400 RET=1 i=0
@@ -66,6 +62,11 @@ fi if [ ${RET} -eq 0 ]; then Test_Info "Shutdown Test PASS" Test_Print_Result "shutdown" 0 + + # Remove TARGET_IPSAVE since no existing qemu running now + if [ -e ${TARGET_IPSAVE} ]; then + rm -rf ${TARGET_IPSAVE} + fi exit 0 else Test_Info "Shutdown Test FAIL"
scripts/qemuimage-tests/sanity/ssh +1 -1
@@ -11,7 +11,7 @@ . $POKYBASE/scripts/qemuimage-testlib -TIMEOUT=200 +TIMEOUT=400 RET=1 # Start qemu and check its network
scripts/qemuimage-tests/sanity/zypper_help +1 -1
@@ -11,7 +11,7 @@ . $POKYBASE/scripts/qemuimage-testlib -TIMEOUT=200 +TIMEOUT=400 RET=1 # Start qemu and check its network
scripts/qemuimage-tests/sanity/zypper_search +1 -1
@@ -11,7 +11,7 @@ . $POKYBASE/scripts/qemuimage-testlib -TIMEOUT=200 +TIMEOUT=400 RET=1 # Start qemu and check its network
scripts/qemuimage-tests/scenario/qemuarm/poky-image-lsb +1 -2
@@ -1,8 +1,7 @@ -sanity shutdown -sanity boot sanity ssh sanity scp sanity dmesg sanity zypper_help sanity zypper_search sanity rpm_query +sanity shutdown
scripts/qemuimage-tests/scenario/qemuarm/poky-image-sato +1 -2
@@ -1,5 +1,3 @@ -sanity shutdown -sanity boot sanity ssh sanity scp sanity dmesg
@@ -7,3 +5,4 @@ sanity zypper_help sanity zypper_search sanity rpm_query sanity connman +sanity shutdown
scripts/qemuimage-tests/scenario/qemuarm/poky-image-sdk +1 -2
@@ -1,5 +1,3 @@ -sanity shutdown -sanity boot sanity ssh sanity scp sanity dmesg
@@ -8,3 +6,4 @@ sanity zypper_search sanity rpm_query sanity compiler sanity connman +sanity shutdown
scripts/qemuimage-tests/scenario/qemumips/poky-image-lsb +1 -2
@@ -1,8 +1,7 @@ -sanity shutdown -sanity boot sanity ssh sanity scp sanity dmesg sanity zypper_help sanity zypper_search sanity rpm_query +sanity shutdown
scripts/qemuimage-tests/scenario/qemumips/poky-image-sato +1 -2
@@ -1,5 +1,3 @@ -sanity shutdown -sanity boot sanity ssh sanity scp sanity dmesg
@@ -7,3 +5,4 @@ sanity zypper_help sanity zypper_search sanity rpm_query sanity connman +sanity shutdown
scripts/qemuimage-tests/scenario/qemumips/poky-image-sdk +1 -2
@@ -1,5 +1,3 @@ -sanity shutdown -sanity boot sanity ssh sanity scp sanity dmesg
@@ -8,3 +6,4 @@ sanity zypper_search sanity rpm_query sanity compiler sanity connman +sanity shutdown
scripts/qemuimage-tests/scenario/qemuppc/poky-image-lsb +1 -2
@@ -1,8 +1,7 @@ -sanity shutdown -sanity boot sanity ssh sanity scp sanity dmesg sanity zypper_help sanity zypper_search sanity rpm_query +sanity shutdown
scripts/qemuimage-tests/scenario/qemuppc/poky-image-sato +1 -2
@@ -1,5 +1,3 @@ -sanity shutdown -sanity boot sanity ssh sanity scp sanity dmesg
@@ -7,3 +5,4 @@ sanity zypper_help sanity zypper_search sanity rpm_query sanity connman +sanity shutdown
scripts/qemuimage-tests/scenario/qemuppc/poky-image-sdk +1 -2
@@ -1,5 +1,3 @@ -sanity shutdown -sanity boot sanity ssh sanity scp sanity dmesg
@@ -8,3 +6,4 @@ sanity zypper_search sanity rpm_query sanity compiler sanity connman +sanity shutdown
scripts/qemuimage-tests/scenario/qemux86-64/poky-image-lsb +1 -2
@@ -1,8 +1,7 @@ -sanity shutdown -sanity boot sanity ssh sanity scp sanity dmesg sanity zypper_help sanity zypper_search sanity rpm_query +sanity shutdown
scripts/qemuimage-tests/scenario/qemux86-64/poky-image-sato +1 -2
@@ -1,5 +1,3 @@ -sanity shutdown -sanity boot sanity ssh sanity scp sanity dmesg
@@ -7,3 +5,4 @@ sanity zypper_help sanity zypper_search sanity rpm_query sanity connman +sanity shutdown
scripts/qemuimage-tests/scenario/qemux86-64/poky-image-sdk +1 -2
@@ -1,5 +1,3 @@ -sanity shutdown -sanity boot sanity ssh sanity scp sanity dmesg
@@ -8,3 +6,4 @@ sanity zypper_search sanity rpm_query sanity compiler sanity connman +sanity shutdown
scripts/qemuimage-tests/scenario/qemux86/poky-image-lsb +1 -2
@@ -1,8 +1,7 @@ -sanity shutdown -sanity boot sanity ssh sanity scp sanity dmesg sanity zypper_help sanity zypper_search sanity rpm_query +sanity shutdown
scripts/qemuimage-tests/scenario/qemux86/poky-image-sato +1 -2
@@ -1,5 +1,3 @@ -sanity shutdown -sanity boot sanity ssh sanity scp sanity dmesg
@@ -7,3 +5,4 @@ sanity zypper_help sanity zypper_search sanity rpm_query sanity connman +sanity shutdown
scripts/qemuimage-tests/scenario/qemux86/poky-image-sdk +1 -2
@@ -1,5 +1,3 @@ -sanity shutdown -sanity boot sanity ssh sanity scp sanity dmesg
@@ -8,3 +6,4 @@ sanity zypper_search sanity rpm_query sanity compiler sanity connman +sanity shutdown
Signature · 1 line
1.7.1
Quoted 53 lines · Jiajun Xu
To reduce the time on sanity testing, we remove variable
SHARE_IMAGEand use a new variableTEST_SERIALIZEin local.conf. It is by default set to 1. Poky will copy and boot the to-be tested image for only once. It will not remove or kill the image and test cases will be serialized executed against the same image. If it is set to 0, image is always be copied for each cases, which takes much time. I had a experiment that latest qemuppc sato only takes 7 minutes to finish 9 sanity test cases, which takes more than 20 minutes before.I also removed sanity case "boot" for target sato/sdk/lsb because the other cases for these targets already cover the check point of "boot".
Pull URL:
git://git.pokylinux.org/poky-contrib.git
Branch: jxu49/master
Browse: http://git.pokylinux.org/cgit.cgi/poky-contrib/log/?h=jxu49/masterThanks,
Jiajun Xu<[email protected]>
---Jiajun Xu (1):
qemuimagetest: Use same image during sanity testing instead of
copying a new image for each casemeta/classes/imagetest-qemu.bbclass | 33 +++++- meta/conf/local.conf.sample | 10 +- scripts/qemuimage-testlib | 110 ++++++++++++++------ scripts/qemuimage-tests/sanity/compiler | 2 +- scripts/qemuimage-tests/sanity/connman | 2 +- scripts/qemuimage-tests/sanity/dmesg | 2 +- scripts/qemuimage-tests/sanity/rpm_query | 2 +- scripts/qemuimage-tests/sanity/scp | 2 +- scripts/qemuimage-tests/sanity/shutdown | 11 +- scripts/qemuimage-tests/sanity/ssh | 2 +- scripts/qemuimage-tests/sanity/zypper_help | 2 +- scripts/qemuimage-tests/sanity/zypper_search | 2 +- .../scenario/qemuarm/poky-image-lsb | 3 +- .../scenario/qemuarm/poky-image-sato | 3 +- .../scenario/qemuarm/poky-image-sdk | 3 +- .../scenario/qemumips/poky-image-lsb | 3 +- .../scenario/qemumips/poky-image-sato | 3 +- .../scenario/qemumips/poky-image-sdk | 3 +- .../scenario/qemuppc/poky-image-lsb | 3 +- .../scenario/qemuppc/poky-image-sato | 3 +- .../scenario/qemuppc/poky-image-sdk | 3 +- .../scenario/qemux86-64/poky-image-lsb | 3 +- .../scenario/qemux86-64/poky-image-sato | 3 +- .../scenario/qemux86-64/poky-image-sdk | 3 +- .../scenario/qemux86/poky-image-lsb | 3 +- .../scenario/qemux86/poky-image-sato | 3 +- .../scenario/qemux86/poky-image-sdk | 3 +- 27 files changed, 138 insertions(+), 87 deletions(-)
Quoted 5 lines
_______________________________________________
poky mailing list
[email protected]
https://lists.yoctoproject.org/listinfo/poky
Pulled into Master
Thanks
Sau!