docbook-utils and related recipes, v2

new file mode 100644
index 0000000..1366ada
@@ -0,0 +1,58 @@
+Patch obtained from OpenEmbedded.
+
+Signed-off-by: Scott Garman <[email protected]>
+--- sgml-common-0.6.3/bin/Makefile.am~autohell.patch	2001-01-30 15:42:21.000000000 +0100
++++ sgml-common-0.6.3/bin/Makefile.am	2004-06-17 11:51:11.000000000 +0200
+@@ -1,6 +1,5 @@
+ primitive_scripts = sgmlwhich
+ 
+-bindir = $(prefix)/bin
+ bin_SCRIPTS = install-catalog $(primitive_scripts)
+ 
+ EXTRA_DIST =  install-catalog.in $(primitive_scripts)
+--- /dev/null	2003-09-23 19:59:22.000000000 +0200
++++ sgml-common-0.6.3/bin/sgmlwhich.in	2004-06-17 11:51:11.000000000 +0200
+@@ -0,0 +1,7 @@
++#!/bin/sh
++# Location of the main configuration file for consistency with non-LSB platforms
++# Send any comments to Eric Bischoff <[email protected]>
++# This program is under GPL license. See LICENSE file for details.
++
++echo "@sysconfdir@/sgml/sgml.conf"
++# Simple, isn't it? ;-)
+--- /dev/null	2003-09-23 19:59:22.000000000 +0200
++++ sgml-common-0.6.3/config/sgml.conf.in	2004-06-17 11:51:11.000000000 +0200
+@@ -0,0 +1,2 @@
++SGML_BASE_DIR=@datadir@/sgml
++SGML_CATALOGS_DIR=@sysconfdir@/sgml
+--- sgml-common-0.6.3/configure.in~autohell.patch	2001-05-25 18:40:54.000000000 +0200
++++ sgml-common-0.6.3/configure.in	2004-06-17 11:53:22.000000000 +0200
+@@ -3,11 +3,6 @@
+ 
+ AM_INIT_AUTOMAKE(sgml-common, 0.6.3)
+ 
+-docdir='$(prefix)/doc'
+-AC_SUBST(docdir)
+-
+-dnl Checks for programs.
+-
+ dnl Checks for libraries.
+ 
+ dnl Checks for header files.
+@@ -18,6 +13,5 @@
+ 
+ AC_OUTPUT(Makefile \
+           bin/Makefile bin/install-catalog \
+-          config/Makefile \
+-          doc/Makefile doc/HTML/Makefile doc/man/Makefile doc/refentry/Makefile \
++          config/Makefile config/sgml.conf bin/sgmlwhich \
+           sgml-iso-entities/Makefile xml-iso-entities/Makefile)
+
+--- sgml-common-0.6.3/Makefile.am~no-docs	2001-05-25 18:22:01.000000000 +0200
++++ sgml-common-0.6.3/Makefile.am	2004-06-17 11:49:09.000000000 +0200
+@@ -1,4 +1,4 @@
+-SUBDIRS = bin config doc sgml-iso-entities xml-iso-entities
++SUBDIRS = bin config sgml-iso-entities xml-iso-entities
+ 
+ sgmlcodir = $(prefix)/share/sgml
+ sgmlco_DATA = xml.dcl

new file mode 100644
index 0000000..ec66aae
@@ -0,0 +1,26 @@
+The COPYING file sgml-common ships with is just a symlink to
+/usr/share/automake/COPYING, which means we can't verify it
+using our normal means. We workaround this by using this patch
+to create our own license file. 
+
+Upstream was notified about this on 2011-01-24. When upgrading
+this recipe, this should be fixed and you should remove this
+patch.
+
+Signed-off-by: Scott Garman <[email protected]>
+diff -urN sgml-common-0.6.3.orig/LICENSE-GPLv2 sgml-common-0.6.3/LICENSE-GPLv2
+--- sgml-common-0.6.3.orig/LICENSE-GPLv2	1969-12-31 16:00:00.000000000 -0800
++++ sgml-common-0.6.3/LICENSE-GPLv2	2011-01-28 17:05:17.299528001 -0800
+@@ -0,0 +1,12 @@
++Copyright (C) 1997 Christian Schwarz <[email protected]>.
++Copyright (C) 2001-2004 Ardo van Rangelrooij <[email protected]>
++
++This is free software; you may redistribute it and/or modify it under
++the terms of the GNU General Public License as published by the Free
++Software Foundation; either version 2, or (at your option) any later
++version.
++
++This is distributed in the hope that it will be useful, but without
++any warranty; without even the implied warranty of merchantability or
++fitness for a particular purpose.  See the GNU General Public License
++for more details.

50 lines not on this page · raw message

52 lines not on this page · raw message

new file mode 100644
index 0000000..a7df4f9
@@ -0,0 +1,23 @@
+require docbook-sgml-dtd-native.inc
+
+LICENSE = "OASIS"
+LIC_FILES_CHKSUM = "file://LICENSE-OASIS;md5=c608985dd5f7f215e669e7639a0b1d2e"
+
+DTD_VERSION = "3.1"
+
+PR = "${INC_PR}.0"
+
+# Note: the upstream sources are not distributed with a license file.
+# LICENSE-OASIS is included as a "patch" to workaround this. When
+# upgrading this recipe, please verify whether this is still needed.
+SRC_URI = "http://www.docbook.org/sgml/3.1/docbk31.zip \
+           file://LICENSE-OASIS"
+
+SRC_URI[md5sum] = "432749c0c806dbae81c8bcb70da3b5d3"
+SRC_URI[sha256sum] = "20261d2771b9a052abfa3d8fab1aa62be05791a010281c566f9073bf0e644538"
+
+do_compile() {
+	# Refer to http://www.linuxfromscratch.org/blfs/view/stable/pst/sgml-dtd-3.html
+	# for details.
+	sed -i -e '/ISO 8879/d' -e 's|DTDDECL "-//OASIS//DTD DocBook V3.1//EN"|SGMLDECL|g' docbook.cat
+}

new file mode 100644
index 0000000..88c9396
@@ -0,0 +1,23 @@
+require docbook-sgml-dtd-native.inc
+
+LICENSE = "OASIS"
+LIC_FILES_CHKSUM = "file://LICENSE-OASIS;md5=c608985dd5f7f215e669e7639a0b1d2e"
+
+DTD_VERSION = "4.1"
+
+PR = "${INC_PR}.0"
+
+# Note: the upstream sources are not distributed with a license file.
+# LICENSE-OASIS is included as a "patch" to workaround this. When
+# upgrading this recipe, please verify whether this is still needed.
+SRC_URI = "http://docbook.org/sgml/4.1/docbk41.zip \
+           file://LICENSE-OASIS"
+
+SRC_URI[md5sum] = "489f6ff2a2173eb1e14216c10533ede2"
+SRC_URI[sha256sum] = "deaafcf0a3677692e7ad4412c0e41c1db3e9da6cdcdb3dd32b2cc1f9c97d6311"
+
+do_compile() {
+	# Refer to http://www.linuxfromscratch.org/blfs/view/stable/pst/sgml-dtd.html
+	# for details.
+	sed -i -e '/ISO 8879/d' -e '/gml/d' docbook.cat
+}

new file mode 100644
index 0000000..6c464f4
@@ -0,0 +1,17 @@
+require docbook-sgml-dtd-native.inc
+
+LICENSE = "OASIS"
+LIC_FILES_CHKSUM = "file://LICENSE-OASIS;md5=c608985dd5f7f215e669e7639a0b1d2e"
+
+DTD_VERSION = "4.5"
+
+PR = "${INC_PR}.0"
+
+SRC_URI[md5sum] = "07c581f4bbcba6d3aac85360a19f95f7"
+SRC_URI[sha256sum] = "8043e514e80c6c19cb146b5d37937d1305bf3abf9b0097c36df7f70f611cdf43"
+
+do_compile() {
+	# Refer to http://www.linuxfromscratch.org/blfs/view/stable/pst/sgml-dtd.html
+	# for details.
+	sed -i -e '/ISO 8879/d' -e'/gml/d' docbook.cat
+}

53 lines not on this page · raw message

new file mode 100644
index 0000000..6da7f5b
@@ -0,0 +1,16 @@
+Permission to use, copy, modify and distribute the DocBook XML DTD
+and its accompanying documentation for any purpose and without fee
+is hereby granted in perpetuity, provided that the above copyright
+notice and this paragraph appear in all copies.  The copyright
+holders make no representation about the suitability of the DTD for
+any purpose.  It is provided "as is" without expressed or implied
+warranty.
+
+If you modify the DocBook DTD in any way, except for declaring and
+referencing additional sets of general entities and declaring
+additional notations, label your DTD as a variant of DocBook.  See
+the maintenance documentation for more information.
+
+Please direct all questions, bug reports, or suggestions for 
+changes to the [email protected] mailing list. For more
+information, see http://www.oasis-open.org/docbook/.

new file mode 100644
index 0000000..92de638
@@ -0,0 +1,52 @@
+SUMMARY = "DSSSL stylesheets used to transform SGML and XML DocBook files"
+DESCRIPTION = "DSSSL stylesheets used to transform SGML and XML DocBook files"
+HOMEPAGE= "http://docbook.sourceforge.net"
+# Simple persmissive
+LICENSE = "DSSSL"
+LIC_FILES_CHKSUM = "file://README;beginline=41;endline=74;md5=875385159b2ee76ecf56136ae7f542d6"
+
+DEPENDS = "sgml-common-native"
+
+PR = "r0"
+
+SRC_URI = "${SOURCEFORGE_MIRROR}/docbook/docbook-dsssl-${PV}.tar.bz2"
+
+SRC_URI[md5sum] = "bc192d23266b9a664ca0aba4a7794c7c"
+SRC_URI[sha256sum] = "2f329e120bee9ef42fbdd74ddd60e05e49786c5a7953a0ff4c680ae6bdf0e2bc"
+
+S = "${WORKDIR}/docbook-dsssl-${PV}"
+
+inherit native
+
+SYSROOT_PREPROCESS_FUNCS += "docbook_dssl_stylesheets_native_mangle"
+
+do_install () {
+	# Refer to http://www.linuxfromscratch.org/blfs/view/stable/pst/docbook-dsssl.html
+	# for details.
+	install -d ${D}${bindir}
+	install -m 0755 bin/collateindex.pl ${D}${bindir}
+
+	install -d ${D}${datadir}/sgml/docbook/dsssl-stylesheets-${PV}
+	install -m 0644 catalog ${D}${datadir}/sgml/docbook/dsssl-stylesheets-${PV}
+	cp -PpRr common ${D}${datadir}/sgml/docbook/dsssl-stylesheets-${PV}
+
+	install-catalog --add ${sysconfdir}/sgml/dsssl-docbook-stylesheets.cat \
+		${D}${datadir}/sgml/docbook/dsssl-stylesheets-${PV}/catalog
+
+	install-catalog --add ${sysconfdir}/sgml/dsssl-docbook-stylesheets.cat \
+		${D}${datadir}/sgml/docbook/dsssl-stylesheets-${PV}/common/catalog
+
+	install-catalog --add ${sysconfdir}/sgml/sgml-docbook.cat \
+		${sysconfdir}/sgml/dsssl-docbook-stylesheets.cat
+
+	# Move these to the image directory so they get staged properly.
+	install -d ${D}${sysconfdir}/sgml
+	cp ${sysconfdir}/sgml/dsssl-docbook-stylesheets.cat ${D}${sysconfdir}/sgml/
+	cp ${sysconfdir}/sgml/sgml-docbook.cat ${D}${sysconfdir}/sgml/
+	cp ${sysconfdir}/sgml/catalog ${D}${sysconfdir}/sgml/
+}
+
+docbook_dssl_stylesheets_native_mangle () {
+	# Remove the image directory path ${D} from the .cat file.
+	sed -i -e "s|${D}||g" ${SYSROOT_DESTDIR}${sysconfdir}/sgml/dsssl-docbook-stylesheets.cat
+}

new file mode 100644
index 0000000..31536f5
@@ -0,0 +1,457 @@
+Patch obtained from OpenEmbedded.
+
+Signed-off-by: Scott Garman <[email protected]>
+--- libsgmls-perl-1.03ii.orig/Makefile
++++ libsgmls-perl-1.03ii/Makefile
+@@ -94,5 +94,5 @@
+ 	mv /tmp/${DIST} SGMLSpm
+ 
+ clean:
+-	cd DOC; make clean
++	#cd DOC; make clean
+ 	rm -f *~ core *.tar *.tar.gz
+--- libsgmls-perl-1.03ii.orig/Makefile.PL
++++ libsgmls-perl-1.03ii/Makefile.PL
+@@ -0,0 +1,17 @@
++use ExtUtils::MakeMaker;
++# See lib/ExtUtils/MakeMaker.pm for details of how to influence
++# the contents of the Makefile that is written.
++WriteMakefile(
++      'NAME'	=> 'SGMLS',
++      'VERSION'	=> '1.03ii',
++      'PM'	=> { 'SGMLS.pm' => '$(INST_LIBDIR)/SGMLS.pm',
++		     'Output.pm' => '$(INST_LIBDIR)/SGMLS/Output.pm',
++		     'Refs.pm' => '$(INST_LIBDIR)/SGMLS/Refs.pm',
++		     'skel.pl' => '$(INST_LIBDIR)/sgmlspl-specs/skel.pl',
++		 },
++      'MAN3PODS'=> { 'SGMLS.pm' => '$(INST_MAN3DIR)/SGMLS.3pm',
++		     'Output.pm' => '$(INST_MAN3DIR)/SGMLS::Output.3pm',
++		     'Refs.pm' => '$(INST_MAN3DIR)/SGMLS::Refs.3pm',
++		 },
++      'EXE_FILES' => [ 'sgmlspl', ],
++);
+--- libsgmls-perl-1.03ii.orig/Output.pm
++++ libsgmls-perl-1.03ii/Output.pm
+@@ -5,7 +5,7 @@
+ @ISA = Exporter;
+ @EXPORT = qw(output push_output pop_output);
+ 
+-$version = '$Id: Output.pm,v 1.6 1995/12/05 12:21:51 david Exp $';
++$version = '$Id: Output.pm,v 1.1 1999/10/26 19:30:45 ardo Exp $';
+ 
+ =head1 NAME
+ 
+--- libsgmls-perl-1.03ii.orig/Refs.pm
++++ libsgmls-perl-1.03ii/Refs.pm
+@@ -2,11 +2,11 @@
+ 
+ use Carp;
+ 
+-$version = '$Id: Refs.pm,v 1.5 1995/12/03 21:28:36 david Exp $';
++$version = '$Id: Refs.pm,v 1.1 1999/10/26 19:30:45 ardo Exp $';
+ 
+ =head1 NAME
+ 
+-SGMLS::Refs
++SGMLS::Refs - Forward refeence handling
+ 
+ =head1 SYNOPSIS
+ 
+--- libsgmls-perl-1.03ii.orig/sgmlspl.1
++++ libsgmls-perl-1.03ii/sgmlspl.1
+@@ -0,0 +1,47 @@
++.\" -*- nroff -*-
++.\" ----------------------------------------------------------------------
++.TH SGMLSPL 1 "October 26, 1999" "SGMLSPL" "SGMLSPL"
++.\"
++.\" ----------------------------------------------------------------------
++.SH "NAME"
++sgmlspl \- a simple post-processor for nsgmls
++.\"
++.\" ----------------------------------------------------------------------
++.SH "SYNOPSIS"
++.B sgmlspl
++.I "spec file"
++.\"
++.\" ----------------------------------------------------------------------
++.SH "DESCRIPTION"
++sgmlspl is a sample application to convert SGML documents to other
++formats by providing a specification file detailing exactly how to
++handle each element, external data entity, subdocument entity, CDATA
++string, record end, SDATA string, and processing instruction.
++
++To use sgmlspl, prepare a specification file containing regular perl5
++code. If the SGML document were named doc.sgml, the sgmlspl
++specification file were named, spec.pl, and the name of the new file
++were doc.latex, then use the following command in a Unix shell to
++convert the SGML document:
++
++nsgmls doc.sgml | sgmlspl spec.pl > doc.latex
++
++sgmlspl will pass any additional arguments on to the specification
++file, which can then process them in the regular perl5 fashion.
++.\"
++.\" ----------------------------------------------------------------------
++.SH "SEE ALSO"
++.TP
++.BR /usr/share/doc/sgmls-doc/sgmlspl/sgmlspl.html
++sgmlspl documentation in HTML format
++.TP
++.BR /usr/share/doc/sgmls-doc/SGMLSpm/sgmls.html
++SGMLS documentation in HTML format
++.TP
++.BR nsgmls (1)
++.\"
++.\" ----------------------------------------------------------------------
++.SH "AUTHOR"
++Ardo van Rangelrooij <[email protected]>
++.\"
++.\" ----------------------------------------------------------------------
+--- libsgmls-perl-1.03ii.orig/sgmlspl
++++ libsgmls-perl-1.03ii/sgmlspl
+@@ -0,0 +1,323 @@
++#!/usr/bin/perl
++########################################################################
++# sgmlspl: a simple SGML postprocesser for the SGMLS and NSGMLS
++#          parsers (requires SGMLS.pm library).
++#
++# Copyright (c) 1995 by David Megginson <[email protected]>
++#
++# This program is free software; you can redistribute it and/or modify
++# it under the terms of the GNU General Public License as published by
++# the Free Software Foundation; either version 2 of the License, or
++# (at your option) any later version.
++#
++# This program is distributed in the hope that it will be useful,
++# but WITHOUT ANY WARRANTY; without even the implied warranty of
++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++# GNU General Public License for more details.
++#
++# You should have received a copy of the GNU General Public License
++# along with this program; if not, write to the Free Software
++# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
++#
++# $Log: sgmlspl,v $
++# Revision 1.1  2004/02/23 01:23:07  ardo
++# Added debian changes for version 1.03ii-27.
++#
++# Revision 1.1  2001/04/15 14:42:01  ardo
++# *** empty log message ***
++#
++# Revision 1.8  1995/12/03  21:46:31  david
++# Eliminated all use of the SGMLS_Event::key method.
++#
++# Revision 1.7  1995/11/15  20:22:24  david
++# Changed "use Output" to "use SGMLS::Output".  Qualified the STDIN
++# filehandle for the SGMLS object with the main:: package name.
++#
++# Revision 1.6  1995/08/12  16:15:14  david
++# Revised version for 1.01 distribution.
++#
++# Revision 1.5  1995/04/27  11:52:25  david
++# Changed 'print' to 'main::output' for re handler; empty string
++# translates into an empty sub {} rather than a sub printing an empty
++# string; instead of evaluating every argument as a perl script, take
++# only the first as a perl script and the rest as its arguments; allow
++# empty scripts or scripts which do not end with '1;'; pass the event
++# itself as the second argument to each handler, after the event data.
++#
++# Revision 1.4  1995/04/23  14:44:58  david
++# Use the Output package.  Fixed the $version variable.
++#
++# Revision 1.3  1995/04/22  21:02:49  david
++# Added some missing 'last SWITCH;' statements in the sgmls function.
++#
++# Revision 1.2  1995/04/22  20:58:48  david
++# Added $SGMLS_PL::version variable and changed SDATA notation from
++# [SDATA] to |SDATA|.
++#
++# Revision 1.1  1995/04/22  14:40:50  david
++# Initial revision
++#
++########################################################################
++
++use SGMLS::Output;
++
++package SGMLS_PL;
++use SGMLS;
++
++$version = '$Id: sgmlspl,v 1.1 2004/02/23 01:23:07 ardo Exp $';
++
++#
++# Set up handler defaults.
++#
++$start_document_handler = sub {};
++$end_document_handler = sub {};
++$start_element_handlers = { '' => sub {} };
++$end_element_handlers = { '' => sub {} };
++$cdata_handler = sub { main::output($_[0]); };
++$sdata_handlers = { '' => sub { main::output($_[0]);} };
++$re_handler = sub { main::output("\n"); };
++$pi_handler = sub { '' => sub {} };
++$entity_handlers = { '' => sub {} };
++$start_subdoc_handlers = { '' => sub {} };
++$end_subdoc_handlers = { '' => sub {} };
++$conforming_handler = sub {};
++
++#
++# Main access point: declare handlers for different SGML events.
++#
++# Usage: sgml(event, handler);
++#
++# The event may be one of the following strings, or a special pattern.
++# The generic events are as follow:
++#
++#   'start'                 The beginning of the document.
++#   'end'                   The end of the document.
++#   'start_element'         The beginning of an element.
++#   'end_element'           The end of an element.
++#   'cdata'                 Regular character data.
++#   'sdata'                 Special system-specific data.
++#   're'                    A record-end.
++#   'pi'                    A processing instruction.
++#   'entity'                An external-entity reference.
++#   'start_subdoc'          The beginning of a subdocument entity.
++#   'end_subdoc'            The end of a subdocument entity.
++#   'conforming'            The document is conforming.
++#
++# In addition to these generic events, it is possible to handlers
++# for certain specific, named events, as follow:
++#
++#   '<GI>'                  The beginning of element GI.
++#   '</GI>'                 The end of element GI.
++#   '[SDATA]'               The system-specific data SDATA.
++#   '&ENAME;'               A reference to the external entity ENAME.
++#   '{ENAME}'               The beginning of the subdocument-entity ENAME.
++#   '{/ENAME}'              The end of the subdocument-entity ENAME.
++#
++#
++# The handler may be a string, which will simply be printed when the
++# event occurs (this is usually useful only for the specific, named
++# events), or a reference to an anonymous subroutine, which will
++# receive two arguments: the event data and the event itself.  For 
++# example,
++#
++#   sgml('<FOO>', "\n\\begin{foo}\n");
++#
++# and
++#
++#   sgml('<FOO>', sub { output("\n\\begin{foo}\n"); });
++#
++# will have identical results.
++#
++sub main::sgml {
++    my ($spec,$handler) = (@_);
++    if (ref($handler) ne 'CODE') {
++	$handler =~ s/\\/\\\\/g;
++	$handler =~ s/'/\\'/g;
++	if ($handler eq '') {
++	    $handler = sub {};
++	} else {
++	    $handler = eval "sub { main::output('$handler'); };";
++	}
++    }
++  SWITCH: {
++				# start-document handler
++      $spec eq 'start' && do {
++	  $start_document_handler = $handler;
++	  last SWITCH;
++      };
++				# end-document handler
++      $spec eq 'end' && do {
++	  $end_document_handler = $handler;
++	  last SWITCH;
++      };
++				# start-element handler
++      $spec =~ /^<([^\/].*|)>$/ && do {
++	  $start_element_handlers->{$1} = $handler;
++	  last SWITCH;
++      };
++				# generic start-element handler
++      $spec eq 'start_element' && do {
++	  $start_element_handlers->{''} = $handler;
++	  last SWITCH;
++      };
++				# end-element handler
++      $spec =~ /^<\/(.*)>$/ && do {
++	  $end_element_handlers->{$1} = $handler;
++	  last SWITCH;
++      };
++				# generic end-element handler
++      $spec =~ 'end_element' && do {
++	  $end_element_handlers->{''} = $handler;
++	  last SWITCH;
++      };
++				# cdata handler
++      $spec eq 'cdata' && do {
++	  $cdata_handler = $handler;
++	  last SWITCH;
++      };
++				# sdata handler
++      $spec =~ /^\|(.*)\|$/ && do {
++	  $sdata_handlers->{$1} = $handler;
++	  last SWITCH;
++      };
++				# generic sdata handler
++      $spec eq 'sdata' && do {
++	  $sdata_handlers->{''} = $handler;
++	  last SWITCH;
++      };
++				# record-end handler
++      $spec eq 're' && do {
++	  $re_handler = $handler;
++	  last SWITCH;
++      };
++				# processing-instruction handler
++      $spec eq 'pi' && do {
++	  $pi_handler = $handler;
++	  last SWITCH;
++      };
++				# entity-reference handler
++      $spec =~ /^\&(.*);$/ && do {
++	  $entity_handlers->{$1} = $handler;
++	  last SWITCH;
++      };
++				# generic entity-reference handler
++      $spec eq 'entity' && do {
++	  $entity_handlers->{''} = $handler;
++	  last SWITCH;
++      };
++				# start-subdoc handler
++      $spec =~ /^\{([^\/].*|)\}$/ && do {
++	  $start_subdoc_handlers->{$1} = $handler;
++	  last SWITCH;
++      };
++				# generic start-subdoc handler
++      $spec eq 'start_subdoc' && do {
++	  $start_subdoc_handlers->{''} = $handler;
++	  last SWITCH;
++      };
++				# end-subdoc handler
++      $spec =~ /^\{\/(.*)\}$/ && do {
++	  $end_subdoc_handlers->{$1} = $handler;
++	  last SWITCH;
++      };
++				# generic end-subdoc handler
++      $spec eq 'end_subdoc' && do {
++	  $end_subdoc_handlers->{''} = $handler;
++	  last SWITCH;
++      };
++				# conforming handler
++      $spec eq 'conforming' && do {
++	  $conforming_handler = $handler;
++	  last SWITCH;
++      };
++
++      die "Bad SGML handler pattern: $spec\n";
++  }
++}
++
++
++#
++# The first argument on the command line is a perl module which will be
++# read here and evaluated in the 'main' package -- everything else will
++# be an argument to it.
++#
++package main;
++
++$ARGV = shift;
++unless ($ARGV eq '' || do 'sgmlspl-specs/' . $ARGV || do $ARGV) {
++    if (!-e $ARGV) {
++	die "FATAL: $ARGV does not exist.\n";
++    } elsif (!-r $ARGV) {
++	die "FATAL: $ARGV exists but is read-protected.\n";
++    } elsif ($@) {
++	die "FATAL: $@\n";
++    }
++}
++
++
++#
++# Do the actual work, using the SGMLS package.
++#
++package SGMLS_PL;
++
++$parse = new SGMLS(main::STDIN);	# a new parse object
++
++&{$start_document_handler}();	# run the start handler.
++
++				# run the appropriate handler for each
++				# event
++while ($event = $parse->next_event) {
++    my $type = $event->type;
++  SWITCH: {
++      $type eq 'start_element' && do {
++	  &{($start_element_handlers->{$event->data->name}||
++		$start_element_handlers->{''} || sub {})}($event->data,$event);
++	  last SWITCH;
++      };
++      $type eq 'end_element' && do {
++	  &{($end_element_handlers->{$event->data->name}||
++		$end_element_handlers->{''} || sub {})}($event->data,$event);
++	  last SWITCH;
++      };
++      $type eq 'cdata' && do {
++	  &{$cdata_handler}($event->data,$event);
++	  last SWITCH;
++      };
++      $type eq 'sdata' && do {
++	  &{($sdata_handlers->{$event->data}||
++	     $sdata_handlers->{''} || sub {})}($event->data,$event);
++	  last SWITCH;
++      };
++      $type eq 're' && do {
++	  &{$re_handler}($event->data,$event);
++	  last SWITCH;
++      };
++      $type eq 'pi' && do {
++	  &{$pi_handler}($event->data,$event);
++	  last SWITCH;
++      };
++      $type eq 'entity' && do {
++	  &{($entity_handlers->{$event->data->name}||
++	     $entity_handlers->{''} || sub {})}($event->data,$event);
++	  last SWITCH;
++      };
++      $type eq 'start_subdoc' && do {
++	  &{($start_subdoc_handlers->{$event->data->name}||
++	     $start_subdoc_handlers->{''} || sub {})}($event->data,$event);
++	  last SWITCH;
++      };
++      $type eq 'end_subdoc' && do {
++	  &{($end_subdoc_handlers->{$event->data->name}||
++	     $end_subdoc_handlers->{''} || sub {})}($event->data,$event);
++	  last SWITCH;
++      };
++      $type eq 'conforming' && do {
++	  &{$conforming_handler}($event->data,$event);
++	  last SWITCH;
++      };
++
++      die "Unknown SGML event type: $type\n";
++  }
++}
++				
++&{$end_document_handler}();	# run the end handler
+--- libsgmls-perl-1.03ii.orig/sgmlspl.pl
++++ libsgmls-perl-1.03ii/sgmlspl.pl
+@@ -238,7 +238,7 @@
+ package main;
+ 
+ $ARGV = shift;
+-unless ($ARGV eq '' || do $ARGV) {
++unless ($ARGV eq '' || do 'sgmlspl-specs/' . $ARGV || do $ARGV) {
+     if (!-e $ARGV) {
+ 	die "FATAL: $ARGV does not exist.\n";
+     } elsif (!-r $ARGV) {
+--- libsgmls-perl-1.03ii.orig/SGMLS.pm
++++ libsgmls-perl-1.03ii/SGMLS.pm
+@@ -1,7 +1,7 @@
+ package SGMLS;
+ use Carp;
+ 
+-$version = '$Revision: 1.14 $';
++$version = '$Revision: 1.1 $';
+ 
+ =head1 NAME
+ 

new file mode 100644
index 0000000..1fab417
@@ -0,0 +1,17 @@
+SUMMARY = "A simple post-processor for SGMLS and NSGMLS"
+DESCRIPTION = "A simple post-processor for SGMLS and NSGMLS"
+HOMEPAGE = "http://search.cpan.org/src/DMEGG/SGMLSpm-1.03ii/DOC/HTML/SGMLSpm/sgmlspm.html"
+SECTION = "libs"
+LICENSE = "GPLv2+"
+LIC_FILES_CHKSUM = "file://COPYING;md5=18810669f13b87348459e611d31ab760"
+PR = "r0"
+
+SRC_URI = "http://www.cpan.org/authors/id/D/DM/DMEGG/SGMLSpm-${PV}.tar.gz \
+           file://combined.patch"
+
+SRC_URI[md5sum] = "5bcb197fd42e67d51c739b1414d514a7"
+SRC_URI[sha256sum] = "f06895c0206dada9f9e7f07ecaeb6a3651fd648f4820f49c1f76bfeaec2f2913"
+
+S = "${WORKDIR}/SGMLSpm"
+
+inherit native cpan

new file mode 100644
index 0000000..4f3507e
@@ -0,0 +1,62 @@
+Patch obtained from OpenEmbedded.
+
+Signed-off-by: Scott Garman <[email protected]>
+--- OpenSP-1.5/include/Attribute.h~attributevalue	2000-03-09 13:30:56.000000000 -0500
++++ OpenSP-1.5/include/Attribute.h	2004-01-20 14:11:36.000000000 -0500
+@@ -31,6 +31,28 @@
+ class AttributeContext;
+ class Syntax;
+ 
++class SP_API AttributeValue : public Resource {
++public:
++  enum Type {
++    implied,
++    cdata,
++    tokenized
++    };
++  AttributeValue();
++  virtual ~AttributeValue();
++  virtual AttributeSemantics *makeSemantics(const DeclaredValue *,
++					    AttributeContext &,
++					    const StringC &,
++					    unsigned &,
++					    unsigned &) const;
++  virtual Type info(const Text *&, const StringC *&) const = 0;
++  virtual const Text *text() const;
++  virtual Boolean recoverUnquoted(const StringC &, const Location &,
++				  AttributeContext &, const StringC &);
++  static Boolean handleAsUnterminated(const Text &, AttributeContext &);
++};
++
++
+ class SP_API AttributeDefinitionDesc {
+ public:
+   AttributeDefinitionDesc() { }
+@@ -380,27 +402,6 @@
+   ConstPtr<Notation> notation_;
+ };
+ 
+-class SP_API AttributeValue : public Resource {
+-public:
+-  enum Type {
+-    implied,
+-    cdata,
+-    tokenized
+-    };
+-  AttributeValue();
+-  virtual ~AttributeValue();
+-  virtual AttributeSemantics *makeSemantics(const DeclaredValue *,
+-					    AttributeContext &,
+-					    const StringC &,
+-					    unsigned &,
+-					    unsigned &) const;
+-  virtual Type info(const Text *&, const StringC *&) const = 0;
+-  virtual const Text *text() const;
+-  virtual Boolean recoverUnquoted(const StringC &, const Location &,
+-				  AttributeContext &, const StringC &);
+-  static Boolean handleAsUnterminated(const Text &, AttributeContext &);
+-};
+-
+ class SP_API ImpliedAttributeValue : public AttributeValue {
+ public:
+   ImpliedAttributeValue();

new file mode 100644
index 0000000..5e2fc8b
@@ -0,0 +1,14 @@
+Patch obtained from OpenEmbedded.
+
+Signed-off-by: Scott Garman <[email protected]>
+Index: OpenSP-1.5/doc/Makefile.am
+===================================================================
+--- OpenSP-1.5.orig/doc/Makefile.am	2000-05-06 09:10:32.000000000 +1000
++++ OpenSP-1.5/doc/Makefile.am	2007-06-02 12:46:50.000000000 +1000
+@@ -1,6 +1,5 @@
+ ## Process this file with automake to produce Makefile.in
+ 
+-docdir = $(prefix)/doc
+ pkgdocdir = $(docdir)/@PACKAGE@
+ 
+ MAINTAINERCLEANFILES = Makefile.in

1,925 lines not on this page · raw message

new file mode 100644
index 0000000..cc849ca
@@ -0,0 +1,15 @@
+Patch obtained from OpenEmbedded.
+
+Signed-off-by: Scott Garman <[email protected]>
+Index: OpenSP-1.5/include/RangeMap.cxx
+===================================================================
+--- OpenSP-1.5.orig/include/RangeMap.cxx	2000-02-26 03:55:21.000000000 +1100
++++ OpenSP-1.5/include/RangeMap.cxx	2007-06-02 11:48:17.000000000 +1000
+@@ -7,6 +7,7 @@
+ #include "RangeMap.h"
+ #include "ISet.h"
+ #include "types.h"
++#include "constant.h"
+ 
+ #ifdef SP_NAMESPACE
+ namespace SP_NAMESPACE {

new file mode 100644
index 0000000..bda87cb
@@ -0,0 +1,27 @@
+SUMMARY = "An SGML parser"
+DESCRIPTION = "An SGML parser used by the OpenJade suite of utilities."
+HOMEPAGE = "http://openjade.sourceforge.net"
+SECTION = "libs"
+LICENSE = "BSD"
+LIC_FILES_CHKSUM = "file://COPYING;md5=641ff1e4511f0a87044ad42f87cb1045"
+
+PR = "r0"
+
+# At -Os it encounters calls to some inline functions which are then
+# not found in any other objects with gcc 4.5
+FULL_OPTIMIZATION += "-O2"
+
+SRC_URI = "${SOURCEFORGE_MIRROR}/openjade/OpenSP-${PV}.tar.gz \
+           file://m4.patch \
+           file://attributevalue.patch \
+           file://rangmap-fix.patch \
+           file://fix-docdir.patch"
+
+SRC_URI[md5sum] = "87f56e79ae0c20397f4207d61d154303"
+SRC_URI[sha256sum] = "987eeb9460185950e066e5db3b5fa531e53e213742b545288405552a5a7bb704"
+
+S = "${WORKDIR}/OpenSP-${PV}"
+
+inherit autotools gettext
+
+BBCLASSEXTEND = "native"

new file mode 100644
index 0000000..fe8df5b
@@ -0,0 +1,173 @@
+Patch obtained from OpenEmbedded.
+
+Signed-off-by: Scott Garman <[email protected]>
+-- config/acinclude.m4
++++ config/acinclude.m4	2002/04/08 23:13:37
+@@ -0,0 +1,61 @@
++dnl Configure-time switch with default
++dnl
++dnl Each switch defines an --enable-FOO and --disable-FOO option in
++dnl the resulting configure script.
++dnl
++dnl Usage:
++dnl SMR_SWITCH(name, description, default, pos-def, neg-def)
++dnl
++dnl where:
++dnl
++dnl name        name of switch; generates --enable-name & --disable-name
++dnl             options
++dnl description help string is set to this prefixed by "enable" or
++dnl             "disable", whichever is the non-default value
++dnl default     either "on" or "off"; specifies default if neither
++dnl             --enable-name nor --disable-name is specified
++dnl pos-def     a symbol to AC_DEFINE if switch is on (optional)
++dnl neg-def     a symbol to AC_DEFINE if switch is off (optional)
++dnl
++AC_DEFUN(SMR_SWITCH, [
++    AC_MSG_CHECKING(whether to enable $2)
++    AC_ARG_ENABLE(
++        $1,
++        ifelse($3, on,
++            [  --disable-[$1]    disable [$2]],
++            [  --enable-[$1]     enable [$2]]),
++        [ if test "$enableval" = yes; then
++            AC_MSG_RESULT(yes)
++            ifelse($4, , , AC_DEFINE($4))
++        else
++            AC_MSG_RESULT(no)
++            ifelse($5, , , AC_DEFINE($5))
++        fi ],
++        ifelse($3, on,
++           [ AC_MSG_RESULT(yes)
++             ifelse($4, , , AC_DEFINE($4)) ],
++           [ AC_MSG_RESULT(no)
++            ifelse($5, , , AC_DEFINE($5))]))])
++
++dnl
++dnl Examine size_t and define SIZE_T_IS_UINT, if size_t is an unsigned int
++dnl
++AC_DEFUN(OJ_SIZE_T_IS_UINT,[
++	AC_REQUIRE([AC_TYPE_SIZE_T])
++	AC_MSG_CHECKING(whether size_t is unsigned int)
++	ac_cv_size_t_is_uint=no
++	AC_LANG_SAVE
++	AC_LANG_CPLUSPLUS
++	AC_TRY_COMPILE([#include <unistd.h>
++
++                       template<class T> class foo { };
++
++                        ], [
++			foo<size_t> x;
++			foo<unsigned int> y;
++			x = y;
++		],ac_cv_size_t_is_uint=yes)
++	AC_LANG_RESTORE
++	AC_MSG_RESULT($ac_cv_size_t_is_uint)
++	test "$ac_cv_size_t_is_uint" = "yes" && AC_DEFINE(SIZE_T_IS_UINT)
++])
+Index: openjade-1.3.2/config/acinclude.m4
+===================================================================
+--- openjade-1.3.2.orig/config/acinclude.m4
++++ openjade-1.3.2/config/acinclude.m4
+@@ -1,3 +1,64 @@
++dnl Configure-time switch with default
++dnl
++dnl Each switch defines an --enable-FOO and --disable-FOO option in
++dnl the resulting configure script.
++dnl
++dnl Usage:
++dnl SMR_SWITCH(name, description, default, pos-def, neg-def)
++dnl
++dnl where:
++dnl
++dnl name        name of switch; generates --enable-name & --disable-name
++dnl             options
++dnl description help string is set to this prefixed by "enable" or
++dnl             "disable", whichever is the non-default value
++dnl default     either "on" or "off"; specifies default if neither
++dnl             --enable-name nor --disable-name is specified
++dnl pos-def     a symbol to AC_DEFINE if switch is on (optional)
++dnl neg-def     a symbol to AC_DEFINE if switch is off (optional)
++dnl
++AC_DEFUN(SMR_SWITCH, [
++    AC_MSG_CHECKING(whether to enable $2)
++    AC_ARG_ENABLE(
++        $1,
++        ifelse($3, on,
++            [  --disable-[$1]    disable [$2]],
++            [  --enable-[$1]     enable [$2]]),
++        [ if test "$enableval" = yes; then
++            AC_MSG_RESULT(yes)
++            ifelse($4, , , AC_DEFINE($4))
++        else
++            AC_MSG_RESULT(no)
++            ifelse($5, , , AC_DEFINE($5))
++        fi ],
++        ifelse($3, on,
++           [ AC_MSG_RESULT(yes)
++             ifelse($4, , , AC_DEFINE($4)) ],
++           [ AC_MSG_RESULT(no)
++            ifelse($5, , , AC_DEFINE($5))]))])
++
++dnl
++dnl Examine size_t and define SIZE_T_IS_UINT, if size_t is an unsigned int
++dnl
++AC_DEFUN(OJ_SIZE_T_IS_UINT,[
++	AC_REQUIRE([AC_TYPE_SIZE_T])
++	AC_MSG_CHECKING(whether size_t is unsigned int)
++	ac_cv_size_t_is_uint=no
++	AC_LANG_SAVE
++	AC_LANG_CPLUSPLUS
++	AC_TRY_COMPILE([#include <unistd.h>
++
++                       template<class T> class foo { };
++
++                        ], [
++			foo<size_t> x;
++			foo<unsigned int> y;
++			x = y;
++		],ac_cv_size_t_is_uint=yes)
++	AC_LANG_RESTORE
++	AC_MSG_RESULT($ac_cv_size_t_is_uint)
++	test "$ac_cv_size_t_is_uint" = "yes" && AC_DEFINE(SIZE_T_IS_UINT)
++])
+ dnl
+ dnl Examine size_t and define SIZE_T_IS_UINT, if size_t is an unsigned int
+ dnl
+Index: openjade-1.3.2/config/aclocal.m4
+===================================================================
+--- openjade-1.3.2.orig/config/aclocal.m4
++++ openjade-1.3.2/config/aclocal.m4
+@@ -3352,7 +3352,7 @@ dnl Each switch defines an --enable-FOO
+ dnl the resulting configure script.
+ dnl
+ dnl Usage:
+-dnl smr_SWITCH(name, description, default, pos-def, neg-def)
++dnl SMR_SWITCH(name, description, default, pos-def, neg-def)
+ dnl
+ dnl where:
+ dnl
+@@ -3365,7 +3365,7 @@ dnl             --enable-name nor --disa
+ dnl pos-def     a symbol to AC_DEFINE if switch is on (optional)
+ dnl neg-def     a symbol to AC_DEFINE if switch is off (optional)
+ dnl
+-AC_DEFUN(smr_SWITCH, [
++AC_DEFUN(SMR_SWITCH, [
+     AC_MSG_CHECKING(whether to enable $2)
+     AC_ARG_ENABLE(
+         $1,
+Index: openjade-1.3.2/config/configure.in
+===================================================================
+--- openjade-1.3.2.orig/config/configure.in
++++ openjade-1.3.2/config/configure.in
+@@ -243,8 +243,8 @@ AC_ARG_ENABLE(http,
+ dnl
+ dnl  optional backends
+ dnl
+-smr_SWITCH(mif, support for FrameMaker MIF output, on, JADE_MIF, DUMMY)
+-smr_SWITCH(html, support for HTML+CSS output, on, JADE_HTML, DUMMY)
++SMR_SWITCH(mif, support for FrameMaker MIF output, on, JADE_MIF, DUMMY)
++SMR_SWITCH(html, support for HTML+CSS output, on, JADE_HTML, DUMMY)
+ 
+ 
+ dnl 

68 lines not on this page · raw message

new file mode 100644
index 0000000..ac5c744
@@ -0,0 +1,34 @@
+Patch obtained from OpenEmbedded.
+
+Signed-off-by: Scott Garman <[email protected]>
+Index: openjade-1.3.2/spgrove/Makefile.sub
+===================================================================
+--- openjade-1.3.2.orig/spgrove/Makefile.sub
++++ openjade-1.3.2/spgrove/Makefile.sub
+@@ -1,8 +1,8 @@
+ LTVERSION=0:1:0
+ LIB=ospgrove
+ INCLUDE=-I$(srcdir)/../grove
+-DEPLIBS=-lm -L$(TOP)/grove -L$(TOP)/grove/.libs \
+-	-L$(TOP)/lib -L$(TOP)/lib/.libs \
++DEPLIBS=-lm $(TOP)/grove \
++	$(TOP)/lib \
+ 	$(LIB_THREADS)
+ OBJS=GroveApp.o GroveBuilder.o SdNode.o
+ GENSRCS=grove_inst.cxx
+Index: openjade-1.3.2/style/Makefile.sub
+===================================================================
+--- openjade-1.3.2.orig/style/Makefile.sub
++++ openjade-1.3.2/style/Makefile.sub
+@@ -1,8 +1,8 @@
+ LTVERSION=0:1:0
+ LIB=ostyle
+-DEPLIBS=-lm -L$(TOP)/grove -L$(TOP)/grove/.libs \
+-  -L$(TOP)/lib -L$(TOP)/lib/.libs \
+-  -L$(TOP)/spgrove -L$(TOP)/spgrove/.libs 
++DEPLIBS=-lm $(TOP)/grove \
++  $(TOP)/lib  \
++  $(TOP)/spgrove
+ OBJS=LangObj.o \
+   Collector.o \
+   DssslApp.o \

new file mode 100644
index 0000000..48e3804
@@ -0,0 +1,15 @@
+Patch obtained from OpenEmbedded.
+
+Signed-off-by: Scott Garman <[email protected]>
+Index: openjade-1.3.2/Makefile.prog.in
+===================================================================
+--- openjade-1.3.2.orig/Makefile.prog.in	2007-12-21 14:48:00.000000000 +0100
++++ openjade-1.3.2/Makefile.prog.in	2007-12-21 14:50:12.000000000 +0100
+@@ -13,6 +13,7 @@
+ ALL_LIBS = $(XLIBS) $(LIBS)
+ Makefile.lt:
+ 	echo 'LT_LIBS='`echo $(ALL_LIBS)|sed 's/\.a/.la/g'` >Makefile.lt
++	sed -i -e "s|libosp.la|libosp.so|" Makefile.lt
+ 
+ PROG:=$(shell echo "$(PROG)" | sed '@program_transform_name@')
+ 

66 lines not on this page · raw message

new file mode 100644
index 0000000..4b053b1
@@ -0,0 +1,20 @@
+SUMMARY = "Utilities for formatting and manipulating DocBook documents"
+DESCRIPTION = "A collection of all the free software tools you need to \
+work on and format DocBook documents."
+HOMEPAGE = "http://sources.redhat.com/docbook-tools/"
+SECTION = "console/utils"
+PRIORITY = "required"
+LICENSE = "GPLv2"
+LIC_FILES_CHKSUM = "file://COPYING;md5=94d55d512a9ba36caa9b7df079bae19f"
+DEPENDS = "openjade-native sgmlspl-native docbook-dsssl-stylesheets-native docbook-sgml-dtd-3.1-native"
+
+PR = "r0"
+
+SRC_URI = "ftp://sources.redhat.com/pub/docbook-tools/new-trials/SOURCES/docbook-utils-${PV}.tar.gz"
+
+SRC_URI[md5sum] = "6b41b18c365c01f225bc417cf632d81c"
+SRC_URI[sha256sum] = "48faab8ee8a7605c9342fb7b906e0815e3cee84a489182af38e8f7c0df2e92e9"
+
+inherit autotools
+
+BBCLASSEXTEND = "native"

index 0a42017..75dde75 100644
@@ -11,7 +11,7 @@ LIC_FILES_CHKSUM = "file://ping.c;beginline=1;endline=35;md5=f9ceb201733e9a6cf8f
                     file://arping.c;beginline=1;endline=10;md5=ada2a6d06acc90f943bddf40d15e0541 \
                     file://tftpd.c;beginline=1;endline=32;md5=28834bf8a91a5b8a92755dbee709ef96 "
 
-DEPENDS = "sysfsutils openssl"
+DEPENDS = "sysfsutils openssl docbook-utils-native"
 
 PR = "r0"
 

@@ -30,7 +30,7 @@ SRC_URI[sha256sum] = "fd3af46c80ebb99607c2ca1f2a3608b6fe828e25bbec6e54f2afd25f6d
 # which is not available in poky
 
 do_compile () {
-	oe_runmake 'CC=${CC} -D_GNU_SOURCE' VPATH="${STAGING_LIBDIR}" all
+	oe_runmake 'CC=${CC} -D_GNU_SOURCE' VPATH="${STAGING_LIBDIR}" all man
 }
 
 do_install () {

@@ -44,9 +44,9 @@ do_install () {
 	  install -m 0755 $i ${D}${base_bindir}/
 	done
 	# Manual pages for things we build packages for
-#	for i in tracepath.8 traceroute6.8 ping.8 arping.8; do
-#	  install -m 0644 doc/$i ${D}${mandir}/man8/ || true
-#	done
+	for i in tracepath.8 traceroute6.8 ping.8 arping.8; do
+	  install -m 0644 doc/$i ${D}${mandir}/man8/ || true
+	done
 }
 
 # Busybox also provides ping and ping6, so use update-alternatives

index 9f99e50..59df237 100644
@@ -5512,3 +5512,72 @@ RECIPE_LATEST_VERSION_pn-man = "1.6f"
 RECIPE_LATEST_VERSION_pn-mc = "4.7.5pre1"
 RECIPE_NO_UPDATE_REASON_pn-bind = "Latest Stable version, 4.7.5pre1 is Alpha/Beta"
 
+RECIPE_STATUS_pn-sgml-common = "green"
+RECIPE_DEPENDENCY_CHECK_pn-sgml-common = "not done"
+RECIPE_LATEST_VERSION_pn-sgml-common = "0.6.3"
+RECIPE_NO_OF_PATCHES_pn-sgml-common = "2"
+RECIPE_LATEST_RELEASE_DATE_pn-sgml-common = "2001/05/25"
+RECIPE_TIME_BETWEEN_LAST_TWO_RELEASES_pn-sgml-common = "unknown"
+RECIPE_COMMENTS_pn-sgml-common = ""
+RECIPE_LAST_UPDATE_pn-sgml-common = "Jan 28, 2011"
+RECIPE_MAINTAINER_pn-sgml-common = "Scott Garman <[email protected]>"
+
+RECIPE_STATUS_pn-docbook-sgml-dtd = "green"
+RECIPE_DEPENDENCY_CHECK_pn-docbook-sgml-dtd = "not done"
+RECIPE_LATEST_VERSION_pn-docbook-sgml-dtd = "4.5"
+RECIPE_NO_OF_PATCHES_pn-docbook-sgml-dtd = "1"
+RECIPE_LATEST_RELEASE_DATE_pn-docbook-sgml-dtd = "2010/05/21"
+RECIPE_TIME_BETWEEN_LAST_TWO_RELEASES_pn-docbook-sgml-dtd = "unknown"
+RECIPE_COMMENTS_pn-docbook-sgml-dtd = ""
+RECIPE_LAST_UPDATE_pn-docbook-sgml-dtd = "Jan 28, 2011"
+RECIPE_MAINTAINER_pn-docbook-sgml-dtd = "Scott Garman <[email protected]>"
+
+RECIPE_STATUS_pn-docbook-dsssl-stylesheet = "green"
+RECIPE_DEPENDENCY_CHECK_pn-docbook-dsssl-stylesheet = "not done"
+RECIPE_LATEST_VERSION_pn-docbook-dsssl-stylesheet = "1.79"
+RECIPE_NO_OF_PATCHES_pn-docbook-dsssl-stylesheet = "0"
+RECIPE_LATEST_RELEASE_DATE_pn-docbook-dsssl-stylesheet = "2008/08/12"
+RECIPE_TIME_BETWEEN_LAST_TWO_RELEASES_pn-docbook-dsssl-stylesheet = "unknown"
+RECIPE_COMMENTS_pn-docbook-dsssl-stylesheet = ""
+RECIPE_LAST_UPDATE_pn-docbook-dsssl-stylesheet = "Jan 26, 2011"
+RECIPE_MAINTAINER_pn-docbook-dsssl-stylesheet = "Scott Garman <[email protected]>"
+
+RECIPE_STATUS_pn-sgmlspl = "green"
+RECIPE_DEPENDENCY_CHECK_pn-sgmlspl = "not done"
+RECIPE_LATEST_VERSION_pn-sgmlspl = "1.03ii"
+RECIPE_NO_OF_PATCHES_pn-sgmlspl = "1"
+RECIPE_LATEST_RELEASE_DATE_pn-sgmlspl = "1995/12/07"
+RECIPE_TIME_BETWEEN_LAST_TWO_RELEASES_pn-sgmlspl = "5 days"
+RECIPE_COMMENTS_pn-sgmlspl = ""
+RECIPE_LAST_UPDATE_pn-sgmlspl = "Jan 26, 2011"
+RECIPE_MAINTAINER_pn-sgmlspl = "Scott Garman <[email protected]>"
+
+RECIPE_STATUS_pn-opensp = "green"
+RECIPE_DEPENDENCY_CHECK_pn-opensp = "not done"
+RECIPE_LATEST_VERSION_pn-opensp = ""
+RECIPE_NO_OF_PATCHES_pn-opensp = "4"
+RECIPE_LATEST_RELEASE_DATE_pn-opensp = "2002/11/24"
+RECIPE_TIME_BETWEEN_LAST_TWO_RELEASES_pn-opensp = "2 years"
+RECIPE_COMMENTS_pn-opensp = ""
+RECIPE_LAST_UPDATE_pn-opensp = "Jan 26, 2011"
+RECIPE_MAINTAINER_pn-opensp = "Scott Garman <[email protected]>"
+
+RECIPE_STATUS_pn-openjade = "green"
+RECIPE_DEPENDENCY_CHECK_pn-openjade = "not done"
+RECIPE_LATEST_VERSION_pn-openjade = "1.3.2"
+RECIPE_NO_OF_PATCHES_pn-openjade = "3"
+RECIPE_LATEST_RELEASE_DATE_pn-openjade = "2002/12/01"
+RECIPE_TIME_BETWEEN_LAST_TWO_RELEASES_pn-openjade = "8 months"
+RECIPE_COMMENTS_pn-openjade = ""
+RECIPE_LAST_UPDATE_pn-openjade = "Jan 26, 2011"
+RECIPE_MAINTAINER_pn-openjade = "Scott Garman <[email protected]>"
+
+RECIPE_STATUS_pn-docbook-utils = "green"
+RECIPE_DEPENDENCY_CHECK_pn-docbook-utils = "not done"
+RECIPE_LATEST_VERSION_pn-docbook-utils = "0.6.14"
+RECIPE_NO_OF_PATCHES_pn-docbook-utils = "0"
+RECIPE_LATEST_RELEASE_DATE_pn-docbook-utils = "2004/02/11"
+RECIPE_TIME_BETWEEN_LAST_TWO_RELEASES_pn-docbook-utils = "1 month"
+RECIPE_COMMENTS_pn-docbook-utils = ""
+RECIPE_LAST_UPDATE_pn-docbook-utils = "Jan 26, 2011"
+RECIPE_MAINTAINER_pn-docbook-utils = "Scott Garman <[email protected]>"