Skip to contentSkip to conversation

Poky Ref Updates

PATCH Applied Scott Rifenbark 2 participants 4 messages Apr 1, 2011 – Apr 4, 2011

lore
Share & tools
lore
#0 lore raw

cover Poky Ref Updates

From: Scott Rifenbark <[email protected]>

Updated the title page revision history table. Also extensively commented out the chapter on Eclipse and Anjuta. The information in this chapter can be referenced and is better documented in the ADT Manual.

Pull URL: git://git.pokylinux.org/poky-contrib.git
Branch: srifenbark/poky-work
Browse: http://git.pokylinux.org/cgit.cgi/poky-contrib/log/?h=srifenbark/poky-work

Thanks,
Scott Rifenbark <[email protected]>
---

Scott Rifenbark (2):
documentation/poky-ref-manual/poky-ref-manual.xml: Updated
rev-history table
documentation/poky-ref-manual/development.xml: Edits for Eclipse and
Anjuta

 documentation/poky-ref-manual/development.xml     |   46 +++++++++++++++++----
 documentation/poky-ref-manual/poky-ref-manual.xml |    4 +-
 2 files changed, 39 insertions(+), 11 deletions(-)
#1 lore raw

PATCH 1/2 documentation/poky-ref-manual/poky-ref-manual.xml: Updated rev-history table

From: Scott Rifenbark <[email protected]>

Updated the revision history table for the manual.

---
 documentation/poky-ref-manual/poky-ref-manual.xml |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)
documentation/poky-ref-manual/poky-ref-manual.xml +2 -2
index ed720c4..874d9a1 100644
@@ -48,9 +48,9 @@
                 <revremark>Poky Master Documentation</revremark>
             </revision>
             <revision>
-                <revnumber>1.0</revnumber>
+                <revnumber>5.0+git</revnumber>
                 <date>6 April 2011</date>
-                <revremark>Poky documentation releasing with the Yocto Project 1.0 Release.</revremark>
+                <revremark>Released with Yocto Project 1.0 (Bernard 5.0).</revremark>
             </revision>
         </revhistory>
 
Signature · 1 line
1.7.0.4
#2 lore raw

PATCH 2/2 documentation/poky-ref-manual/development.xml: Edits for Eclipse and Anjuta

In reply to Scott Rifenbark

From: Scott Rifenbark <[email protected]>

I commented out a large section of the chapter, which went into detail on how to locate, install, configure, and use the Yocto Ecliple plug-in. This information is redundant in this book and is better explained in the ADT Manual. I am referencing the information from this chapter now.

---
 documentation/poky-ref-manual/development.xml |   46 ++++++++++++++++++++-----
 1 files changed, 37 insertions(+), 9 deletions(-)
documentation/poky-ref-manual/development.xml +37 -9
index db844a9..e63511b 100644
@@ -12,7 +12,7 @@
     </para>
 
         <section id="platdev-appdev-external-sdk">
-        <title>External Development Using the Poky SDK</title>
+        <title>External Development Using the Application Development Toolkit (ADT)</title>
         <para>
             The meta-toolchain and meta-toolchain-sdk targets build tarballs that contain toolchains and 
             libraries suitable for application development outside of Poky. 
@@ -45,17 +45,41 @@
         </section>
 
         <section id="using-the-eclipse-and-anjuta-plug-ins">
-        <title>Using the Eclipse and Anjuta Plug-ins</title>
+        <title>Using the Eclipse Plug-in</title>
         <para>
-            Yocto Project supports both Anjuta and Eclipse IDE plug-ins to make developing software
-            easier for the application developer. The plug-ins provide capability
-            extensions to the graphical IDE allowing for cross compilation, 
-            deployment and execution of the output in a QEMU emulation session. 
-            Support of these plug-ins also allows for cross debugging and
-            profiling.  Additionally, the Eclipse plug-in provides a suite of tools 
+            The current release of the Yocto Project supports the Eclipse IDE plug-in
+            to make developing software easier for the application developer. 
+            The plug-in provides capability extensions to the graphical IDE to allow
+            for cross compilation, deployment and execution of the output in a QEMU 
+            emulation session. 
+            Support of the Eclipse plug-in also allows for cross debugging and
+            profiling.  
+            Additionally, the Eclipse plug-in provides a suite of tools 
             that allows the developer to perform remote profiling, tracing, collection of 
             power data, collection of latency data and collection of performance data.
         </para>
+        <note>
+            The current release of the Yocto Project no longer supports the Anjuta plug-in.
+            However, the Poky Anjuta Plug-in is available to download directly from the Poky 
+            Git repository located through the web interface at
+            <ulink url="http://git.yoctoproject.org/"></ulink> under IDE Plugins.
+            The community is free to continue supporting it beyond the Yocto Project 0.9
+            Release.            
+        </note>
+        <para>
+            To use the Eclipse plug-in you need the Eclipse Framework (Helios 3.6.1) along 
+            with other plug-ins installed into the Eclipse IDE.
+            Once you have your environment setup you need to configure the Eclipse plug-in.
+            For information on how to install and configure the Eclipse plug-in, see the
+            <ulink url='http://www.yoctoproject.org/docs/adt-manual/adt-manual.html#adt-eclipse'>
+            "Working Within Eclipse"</ulink> chapter in the 
+            <ulink url='http://www.yoctoproject.org/docs/adt-manual/adt-manual.html'>
+            "Application Development Toolkit (ADT) User's Guide."</ulink>
+         </para>
+
+
+
+<!--
 
             <section id="the-eclipse-plug-in">
             <title>The Eclipse Plug-in</title>
@@ -309,7 +333,7 @@
              <para>
                 See the README file contained in the project for more information on 
                 Anjuta dependencies and building the plug-in. 
-                If you want to disable remote gdb debugging, pass the "--disable-gdb-integration" switch when 
+                If you want to disable remote gdb debugging, pass the "&dash;&dash;disable-gdb-integration" switch when 
                 you configure the plug-in.
             </para>
                 <section id="setting-up-the-anjuta-plugin">
@@ -416,6 +440,10 @@
                 </para>
                 </section>
             </section>
+
+
+-->
+
         </section>
 
         <section id="platdev-appdev-qemu">
Signature · 1 line
1.7.0.4
#3 lore raw
In reply to Scott Rifenbark
Quoted 16 lines · Scott Rifenbark

From: Scott Rifenbark <[email protected]>

Updated the title page revision history table. Also extensively commented out the chapter on Eclipse and Anjuta. The information in this chapter can be referenced and is better documented in the ADT Manual.

Pull URL: git://git.pokylinux.org/poky-contrib.git
Branch: srifenbark/poky-work
Browse: http://git.pokylinux.org/cgit.cgi/poky-contrib/log/?h=srifenbark/poky-work

Thanks,
Scott Rifenbark <[email protected]>
---

Quoted 5 lines

Scott Rifenbark (2):
documentation/poky-ref-manual/poky-ref-manual.xml: Updated
rev-history table
documentation/poky-ref-manual/development.xml: Edits for Eclipse and
Anjuta

Merged to master, thanks!

Richard