tulip: logging cleanups
Subsystems (2)
cover tulip: logging cleanups
More like 30 minutes.
Joe Perches (4):
tulip: xircom_cb: Convert #ifdef DEBUG blocks and enter/leave uses
tulip: Convert printks to netdev_<level>
tulip: Convert uses of KERN_DEBUG
tulip: Use pr_<level> where appropriate
drivers/net/tulip/21142.c | 14 +- drivers/net/tulip/Makefile | 2 + drivers/net/tulip/de2104x.c | 174 +++++++++++-------------- drivers/net/tulip/dmfe.c | 9 +- drivers/net/tulip/eeprom.c | 4 +- drivers/net/tulip/interrupt.c | 48 ++++---- drivers/net/tulip/media.c | 49 ++++---- drivers/net/tulip/pnic.c | 22 ++-- drivers/net/tulip/pnic2.c | 16 +- drivers/net/tulip/timer.c | 47 +++---- drivers/net/tulip/tulip.h | 8 +- drivers/net/tulip/tulip_core.c | 50 ++++---- drivers/net/tulip/uli526x.c | 65 +++------ drivers/net/tulip/winbond-840.c | 81 ++++++------ drivers/net/tulip/xircom_cb.c | 268 ++++++++++++-------------------------- 15 files changed, 354 insertions(+), 503 deletions(-)
Signature · 1 line
1.7.5.rc3.dirty
PATCH 1/4 tulip: xircom_cb: Convert #ifdef DEBUG blocks and enter/leave uses
Change the blocks that are guarded by #if DEBUG to be #if defined DEBUG && DEBUG > 1 so that pr_debug can be used later.
Remove enter/leave macros and uses.
--- drivers/net/tulip/xircom_cb.c | 134 ++++------------------------------------- 1 files changed, 13 insertions(+), 121 deletions(-)
drivers/net/tulip/xircom_cb.c +13 -121
@@ -37,15 +37,6 @@#include <asm/irq.h> #endif -#ifdef DEBUG -#define enter (x) printk("Enter: %s, %s line %i\n",x,__FILE__,__LINE__) -#define leave (x) printk("Leave: %s, %s line %i\n",x,__FILE__,__LINE__) -#else -#define enter (x) do {} while (0) -#define leave (x) do {} while (0) -#endif - -MODULE_DESCRIPTION ("Xircom Cardbus ethernet driver" );MODULE_AUTHOR ("Arjan van de Ven <[email protected]>" );MODULE_LICENSE ("GPL" );
@@ -161,7 +152,7 @@ static struct pci_driver xircom_ops = { }; -#ifdef DEBUG +#if definedDEBUG &&DEBUG >1 static void print_binary (unsigned int number) {int i,i2;
@@ -176,7 +167,7 @@ static void print_binary(unsigned int number)if ((i&3 )==0 ) buffer[i2++]=' '; } -printk ("%s\n" ,buffer); +pr_debug ("%s\n" ,buffer); }#endif
@@ -205,7 +196,6 @@ static int __devinit xircom_probe(struct pci_dev *pdev, const struct pci_device_struct xircom_private *private;unsigned long flags;unsigned short tmp16; -enter ("xircom_probe" );/* First do the PCI initialisation */
@@ -285,7 +275,6 @@ static int __devinit xircom_probe(struct pci_dev *pdev, const struct pci_device_trigger_receive (private); -leave ("xircom_probe" );return 0 ; reg_fail:
@@ -310,7 +299,6 @@ static void __devexit xircom_remove(struct pci_dev *pdev)struct net_device *dev =pci_get_drvdata (pdev);struct xircom_private *card =netdev_priv (dev); -enter ("xircom_remove" );pci_free_consistent (pdev,8192 ,card->rx_buffer,card->rx_dma_handle);pci_free_consistent (pdev,8192 ,card->tx_buffer,card->tx_dma_handle);
@@ -318,7 +306,6 @@ static void __devexit xircom_remove(struct pci_dev *pdev)unregister_netdev (dev);free_netdev (dev);pci_set_drvdata (pdev,NULL ); -leave ("xircom_remove" ); }static irqreturn_t xircom_interrupt (int irq,void *dev_instance)
@@ -328,17 +315,15 @@ static irqreturn_t xircom_interrupt(int irq, void *dev_instance)unsigned int status;int i; -enter ("xircom_interrupt\n" ); -spin_lock (&card->lock); status =inl (card->io_port+CSR5 ); -#ifdef DEBUG +#if definedDEBUG &&DEBUG >1 print_binary (status); -printk ("tx status 0x%08x 0x%08x\n" , - card->tx_buffer[0 ], card->tx_buffer[4 ]); -printk ("rx status 0x%08x 0x%08x\n" , - card->rx_buffer[0 ], card->rx_buffer[4 ]); +pr_debug ("tx status 0x%08x 0x%08x\n" , + card->tx_buffer[0 ], card->tx_buffer[4 ]); +pr_debug ("rx status 0x%08x 0x%08x\n" , + card->rx_buffer[0 ], card->rx_buffer[4 ]);#endif /* Handle shared irq and hotplug */ if (status ==0 || status ==0xffffffff ) {
@@ -369,9 +354,7 @@ static irqreturn_t xircom_interrupt(int irq, void *dev_instance)for (i=0 ;i<NUMDESCRIPTORS ;i++)investigate_read_descriptor (dev,card,i,bufferoffsets[i]); -spin_unlock (&card->lock); -leave ("xircom_interrupt" );return IRQ_HANDLED ; }
@@ -382,7 +365,6 @@ static netdev_tx_t xircom_start_xmit(struct sk_buff *skb,unsigned long flags;int nextdescriptor;int desc; -enter ("xircom_start_xmit" ); card =netdev_priv (dev);spin_lock_irqsave (&card->lock,flags);
@@ -424,13 +406,10 @@ static netdev_tx_t xircom_start_xmit(struct sk_buff *skb,netif_stop_queue (dev); } card->transmit_used = nextdescriptor; -leave ("xircom-start_xmit - sent" );spin_unlock_irqrestore (&card->lock,flags);return NETDEV_TX_OK ; } - -/* Uh oh... no free descriptor... drop the packet */ netif_stop_queue (dev);spin_unlock_irqrestore (&card->lock,flags);
@@ -446,18 +425,16 @@ static int xircom_open(struct net_device *dev) {struct xircom_private *xp =netdev_priv (dev);int retval; -enter ("xircom_open" ); +pr_info ("xircom cardbus adaptor found, registering as %s, using irq %i\n" , dev->name, dev->irq); retval =request_irq (dev->irq, xircom_interrupt,IRQF_SHARED , dev->name, dev); -if (retval) { -leave ("xircom_open - No IRQ" ); +if (retval)return retval; - }xircom_up (xp); xp->open =1 ; -leave ("xircom_open" ); +return 0 ; }
@@ -466,7 +443,6 @@ static int xircom_close(struct net_device *dev)struct xircom_private *card;unsigned long flags; -enter ("xircom_close" ); card =netdev_priv (dev);netif_stop_queue (dev);/* we don't want new packets */
@@ -486,8 +462,6 @@ static int xircom_close(struct net_device *dev) card->open =0 ;free_irq (dev->irq,dev); -leave ("xircom_close" ); -return 0 ; }
@@ -507,8 +481,6 @@ static void initialize_card(struct xircom_private *card) {unsigned int val;unsigned long flags; -enter ("initialize_card" ); -spin_lock_irqsave (&card->lock, flags);
@@ -534,8 +506,6 @@ static void initialize_card(struct xircom_private *card)deactivate_transmitter (card);spin_unlock_irqrestore (&card->lock, flags); - -leave ("initialize_card" ); }/*
@@ -547,12 +517,9 @@ ignored; I chose zero.static void trigger_transmit (struct xircom_private *card) {unsigned int val; -enter ("trigger_transmit" ); val =0 ;outl (val, card->io_port +CSR1 ); - -leave ("trigger_transmit" ); }/*
@@ -565,12 +532,9 @@ ignored; I chose zero.static void trigger_receive (struct xircom_private *card) {unsigned int val; -enter ("trigger_receive" ); val =0 ;outl (val, card->io_port +CSR2 ); - -leave ("trigger_receive" ); }/*
@@ -581,8 +545,6 @@ static void setup_descriptors(struct xircom_private *card) {u32 address;int i; -enter ("setup_descriptors" ); -BUG_ON (card->rx_buffer ==NULL );BUG_ON (card->tx_buffer ==NULL );
@@ -636,8 +598,6 @@ static void setup_descriptors(struct xircom_private *card)/* wite the transmit descriptor ring to the card */ address = card->tx_dma_handle;outl (address, card->io_port +CSR4 );/* xmit descr list address */ - -leave ("setup_descriptors" ); }/*
@@ -647,13 +607,10 @@ valid by setting the address in the card to 0x00.static void remove_descriptors (struct xircom_private *card) {unsigned int val; -enter ("remove_descriptors" ); val =0 ;outl (val, card->io_port +CSR3 );/* Receive descriptor address */ outl (val, card->io_port +CSR4 );/* Send descriptor address */ - -leave ("remove_descriptors" ); }/*
@@ -665,21 +622,17 @@ This function also clears the status-bit.static int link_status_changed (struct xircom_private *card) {unsigned int val; -enter ("link_status_changed" ); val =inl (card->io_port +CSR5 );/* Status register */ -if ((val & (1 <<27 )) ==0 ) {/* no change */ -leave ("link_status_changed - nochange" ); +if ((val & (1 <<27 )) ==0 )/* no change */ return 0 ; - }/* clear the event by writing a 1 to the bit in the status register. */ val = (1 <<27 );outl (val, card->io_port +CSR5 ); -leave ("link_status_changed - changed" );return 1 ; }
@@ -691,16 +644,12 @@ in a non-stopped state.static int transmit_active (struct xircom_private *card) {unsigned int val; -enter ("transmit_active" ); val =inl (card->io_port +CSR5 );/* Status register */ -if ((val & (7 <<20 )) ==0 ) {/* transmitter disabled */ -leave ("transmit_active - inactive" ); +if ((val & (7 <<20 )) ==0 )/* transmitter disabled */ return 0 ; - } -leave ("transmit_active - active" );return 1 ; }
@@ -711,17 +660,12 @@ in a non-stopped state.static int receive_active (struct xircom_private *card) {unsigned int val; -enter ("receive_active" ); - val =inl (card->io_port +CSR5 );/* Status register */ -if ((val & (7 <<17 )) ==0 ) {/* receiver disabled */ -leave ("receive_active - inactive" ); +if ((val & (7 <<17 )) ==0 )/* receiver disabled */ return 0 ; - } -leave ("receive_active - active" );return 1 ; }
@@ -739,8 +683,6 @@ static void activate_receiver(struct xircom_private *card) {unsigned int val;int counter; -enter ("activate_receiver" ); - val =inl (card->io_port +CSR6 );/* Operation mode */
@@ -780,8 +722,6 @@ static void activate_receiver(struct xircom_private *card)if (counter <=0 )pr_err ("Receiver failed to re-activate\n" ); } - -leave ("activate_receiver" ); }/*
@@ -795,7 +735,6 @@ static void deactivate_receiver(struct xircom_private *card) {unsigned int val;int counter; -enter ("deactivate_receiver" ); val =inl (card->io_port +CSR6 );/* Operation mode */ val = val & ~2 ;/* disable the receiver */
@@ -811,9 +750,6 @@ static void deactivate_receiver(struct xircom_private *card)if (counter <=0 )pr_err ("Receiver failed to deactivate\n" ); } - - -leave ("deactivate_receiver" ); }
@@ -831,8 +767,6 @@ static void activate_transmitter(struct xircom_private *card) {unsigned int val;int counter; -enter ("activate_transmitter" ); - val =inl (card->io_port +CSR6 );/* Operation mode */
@@ -871,8 +805,6 @@ static void activate_transmitter(struct xircom_private *card)if (counter <=0 )pr_err ("Transmitter failed to re-activate\n" ); } - -leave ("activate_transmitter" ); }/*
@@ -886,7 +818,6 @@ static void deactivate_transmitter(struct xircom_private *card) {unsigned int val;int counter; -enter ("deactivate_transmitter" ); val =inl (card->io_port +CSR6 );/* Operation mode */ val = val & ~2 ;/* disable the transmitter */
@@ -902,9 +833,6 @@ static void deactivate_transmitter(struct xircom_private *card)if (counter <=0 )pr_err ("Transmitter failed to deactivate\n" ); } - - -leave ("deactivate_transmitter" ); }
@@ -916,13 +844,10 @@ must be called with the lock held and interrupts disabled.static void enable_transmit_interrupt (struct xircom_private *card) {unsigned int val; -enter ("enable_transmit_interrupt" ); val =inl (card->io_port +CSR7 );/* Interrupt enable register */ val |=1 ;/* enable the transmit interrupt */ outl (val, card->io_port +CSR7 ); - -leave ("enable_transmit_interrupt" ); }
@@ -934,13 +859,10 @@ must be called with the lock held and interrupts disabled.static void enable_receive_interrupt (struct xircom_private *card) {unsigned int val; -enter ("enable_receive_interrupt" ); val =inl (card->io_port +CSR7 );/* Interrupt enable register */ val = val | (1 <<6 );/* enable the receive interrupt */ outl (val, card->io_port +CSR7 ); - -leave ("enable_receive_interrupt" ); }/*
@@ -951,13 +873,10 @@ must be called with the lock held and interrupts disabled.static void enable_link_interrupt (struct xircom_private *card) {unsigned int val; -enter ("enable_link_interrupt" ); val =inl (card->io_port +CSR7 );/* Interrupt enable register */ val = val | (1 <<27 );/* enable the link status chage interrupt */ outl (val, card->io_port +CSR7 ); - -leave ("enable_link_interrupt" ); }
@@ -970,12 +889,9 @@ must be called with the lock held and interrupts disabled.static void disable_all_interrupts (struct xircom_private *card) {unsigned int val; -enter ("enable_all_interrupts" ); val =0 ;/* disable all interrupts */ outl (val, card->io_port +CSR7 ); - -leave ("disable_all_interrupts" ); }/*
@@ -986,7 +902,6 @@ must be called with the lock held and interrupts disabled.static void enable_common_interrupts (struct xircom_private *card) {unsigned int val; -enter ("enable_link_interrupt" ); val =inl (card->io_port +CSR7 );/* Interrupt enable register */ val |= (1 <<16 );/* Normal Interrupt Summary */
@@ -998,8 +913,6 @@ static void enable_common_interrupts(struct xircom_private *card) val |= (1 <<2 );/* Transmit Buffer Unavailable */ val |= (1 <<1 );/* Transmit Process Stopped */ outl (val, card->io_port +CSR7 ); - -leave ("enable_link_interrupt" ); }/*
@@ -1010,13 +923,11 @@ must be called with the lock held and interrupts disabled.static int enable_promisc (struct xircom_private *card) {unsigned int val; -enter ("enable_promisc" ); val =inl (card->io_port +CSR6 ); val = val | (1 <<6 );outl (val, card->io_port +CSR6 ); -leave ("enable_promisc" );return 1 ; }
@@ -1031,7 +942,6 @@ Must be called in locked state with interrupts disabledstatic int link_status (struct xircom_private *card) {unsigned int val; -enter ("link_status" ); val =inb (card->io_port +CSR12 );
@@ -1042,7 +952,6 @@ static int link_status(struct xircom_private *card)/* If we get here -> no link at all */ -leave ("link_status" );return 0 ; }
@@ -1061,8 +970,6 @@ static void read_mac_address(struct xircom_private *card)unsigned long flags;int i; -enter ("read_mac_address" ); -spin_lock_irqsave (&card->lock, flags);outl (1 <<12 , card->io_port +CSR9 );/* enable boot rom access */
@@ -1090,7 +997,6 @@ static void read_mac_address(struct xircom_private *card) }spin_unlock_irqrestore (&card->lock, flags);pr_debug (" %pM\n" , card->dev->dev_addr); -leave ("read_mac_address" ); }
@@ -1103,8 +1009,6 @@ static void transceiver_voodoo(struct xircom_private *card) {unsigned long flags; -enter ("transceiver_voodoo" ); -/* disable all powermanagement */ pci_write_config_dword (card->pdev,PCI_POWERMGMT ,0x0000 );
@@ -1122,7 +1026,6 @@ static void transceiver_voodoo(struct xircom_private *card)spin_unlock_irqrestore (&card->lock, flags);netif_start_queue (card->dev); -leave ("transceiver_voodoo" ); }
@@ -1131,8 +1034,6 @@ static void xircom_up(struct xircom_private *card)unsigned long flags;int i; -enter ("xircom_up" ); -/* disable all powermanagement */ pci_write_config_dword (card->pdev,PCI_POWERMGMT ,0x0000 );
@@ -1156,7 +1057,6 @@ static void xircom_up(struct xircom_private *card)trigger_receive (card);trigger_transmit (card);netif_start_queue (card->dev); -leave ("xircom_up" ); }/* Bufferoffset is in BYTES */
@@ -1164,7 +1064,6 @@ static void investigate_read_descriptor(struct net_device *dev,struct xircom_pri {int status; -enter ("investigate_read_descriptor" ); status =le32_to_cpu (card->rx_buffer[4 *descnr]);if ((status >0 )) {/* packet received */
@@ -1197,9 +1096,6 @@ static void investigate_read_descriptor(struct net_device *dev,struct xircom_pri card->rx_buffer[4 *descnr] =cpu_to_le32 (0x80000000 );trigger_receive (card); } - -leave ("investigate_read_descriptor" ); - }
@@ -1208,8 +1104,6 @@ static void investigate_write_descriptor(struct net_device *dev, struct xircom_p {int status; -enter ("investigate_write_descriptor" ); - status =le32_to_cpu (card->tx_buffer[4 *descnr]);#if 0 if (status &0x8000 ) {/* Major error */
@@ -1232,8 +1126,6 @@ static void investigate_write_descriptor(struct net_device *dev, struct xircom_p dev->stats.tx_packets++; } -leave ("investigate_write_descriptor" ); - }
Signature · 1 line
1.7.5.rc3.dirty
Re: [PATCH net-next 1/4] tulip: xircom_cb: Convert #ifdef DEBUG blocks and enter/leave uses
From: Joe Perches <[email protected]>
Date: Mon, 9 May 2011 12:45:20 -0700
Quoted 7 lines
Change the blocks that are guarded by #if DEBUG to be #if defined DEBUG && DEBUG > 1 so that
pr_debugcan be used later.Remove enter/leave macros and uses.
Signed-off-by Joe Perches <[email protected]>
Applied.
PATCH 2/4 tulip: Convert printks to netdev_<level>
In reply to Joe PerchesUse the current more descriptive logging styles.
Add pr_fmt and remove PFX where appropriate. Use netif_<level>, netdev_<level>
Indent a few blocks in xircom_cb where appropriate.
--- drivers/net/tulip/de2104x.c | 139 ++++++++++++++++++--------------------- drivers/net/tulip/dmfe.c | 2 +- drivers/net/tulip/eeprom.c | 4 +- drivers/net/tulip/tulip_core.c | 25 +++---- drivers/net/tulip/uli526x.c | 42 +++++------- drivers/net/tulip/winbond-840.c | 6 +- drivers/net/tulip/xircom_cb.c | 132 ++++++++++++++++++++----------------- 7 files changed, 170 insertions(+), 180 deletions(-)
drivers/net/tulip/de2104x.c +63 -76
@@ -27,6 +27,8 @@*/ +#define pr_fmt (fmt) KBUILD_MODNAME ": " fmt +#define DRV_NAME "de2104x"#define DRV_VERSION "0.7"#define DRV_RELDATE "Mar 17, 2004"
@@ -73,8 +75,6 @@ static int rx_copybreak = 100;module_param (rx_copybreak, int,0 );MODULE_PARM_DESC (rx_copybreak,"de2104x Breakpoint at which Rx packets are copied" ); -#define PFX DRV_NAME ": " -#define DE_DEF_MSG_ENABLE (NETIF_MSG_DRV | \ NETIF_MSG_PROBE | \ NETIF_MSG_LINK | \
@@ -377,18 +377,16 @@ static u16 t21041_csr15[] = { 0x0008, 0x0006, 0x000E, 0x0008, 0x0008, };static void de_rx_err_acct (struct de_private *de,unsigned rx_tail,u32 status,u32 len) { -if (netif_msg_rx_err (de)) -printk (KERN_DEBUG -"%s: rx err, slot %d status 0x%x len %d\n" , - de->dev->name, rx_tail, status, len); +netif_printk (de, rx_err,KERN_DEBUG , de->dev, +"rx err, slot %d status 0x%x len %d\n" , + rx_tail, status, len);if ((status &0x38000300 ) !=0x0300 ) {/* Ingore earlier buffers. */ if ((status &0xffff ) !=0x7fff ) { -if (netif_msg_rx_err (de)) -dev_warn (&de->dev->dev, -"Oversized Ethernet frame spanned multiple buffers, status %08x!\n" , - status); +netif_warn (de, rx_err, de->dev, +"Oversized Ethernet frame spanned multiple buffers, status %08x!\n" , + status); de->net_stats.rx_length_errors++; } }else if (status & RxError) {
@@ -491,7 +489,7 @@ rx_next: }if (!rx_work) -dev_warn (&de->dev->dev,"rx work limit reached\n" ); +netdev_warn (de->dev,"rx work limit reached\n" ); de->rx_tail = rx_tail; }
@@ -534,9 +532,9 @@ static irqreturn_t de_interrupt (int irq, void *dev_instance)pci_read_config_word (de->pdev,PCI_STATUS , &pci_status);pci_write_config_word (de->pdev,PCI_STATUS , pci_status); -dev_err (&de->dev->dev, -"PCI bus error, status=%08x, PCI status=%04x\n" , - status, pci_status); +netdev_err (de->dev, +"PCI bus error, status=%08x, PCI status=%04x\n" , + status, pci_status); }return IRQ_HANDLED ;
@@ -873,7 +871,7 @@ static void de_stop_rxtx (struct de_private *de)udelay (100 ); } -dev_warn (&de->dev->dev,"timeout expired stopping DMA\n" ); +netdev_warn (de->dev,"timeout expired, stopping DMA\n" ); }static inline void de_start_rxtx (struct de_private *de)
@@ -907,9 +905,8 @@ static void de_link_up(struct de_private *de) {if (!netif_carrier_ok (de->dev)) {netif_carrier_on (de->dev); -if (netif_msg_link (de)) -dev_info (&de->dev->dev,"link up, media %s\n" , - media_name[de->media_type]); +netif_info (de, link, de->dev,"link up, media %s\n" , + media_name[de->media_type]); } }
@@ -917,8 +914,7 @@ static void de_link_down(struct de_private *de) {if (netif_carrier_ok (de->dev)) {netif_carrier_off (de->dev); -if (netif_msg_link (de)) -dev_info (&de->dev->dev,"link down\n" ); +netif_info (de, link, de->dev,"link down\n" ); } }
@@ -928,8 +924,7 @@ static void de_set_media (struct de_private *de)u32 macmode =dr32 (MacMode);if (de_is_running (de)) -dev_warn (&de->dev->dev, -"chip is running while changing media!\n" ); +netdev_warn (de->dev,"chip is running while changing media!\n" );if (de->de21040)dw32 (CSR11 ,FULL_DUPLEX_MAGIC );
@@ -948,18 +943,13 @@ static void de_set_media (struct de_private *de)else macmode &= ~FullDuplex; -if (netif_msg_link (de)) -dev_info (&de->dev->dev,"set link %s\n" , media_name[media]); -if (netif_msg_hw (de)) { -dev_info (&de->dev->dev,"mode 0x%x, sia 0x%x,0x%x,0x%x,0x%x\n" , -dr32 (MacMode),dr32 (SIAStatus), -dr32 (CSR13 ),dr32 (CSR14 ),dr32 (CSR15 )); - -dev_info (&de->dev->dev, -"set mode 0x%x, set sia 0x%x,0x%x,0x%x\n" , - macmode, de->media[media].csr13, - de->media[media].csr14, de->media[media].csr15); - } +netif_info (de, link, de->dev,"set link %s\n" , media_name[media]); +netif_info (de, hw, de->dev,"mode 0x%x, sia 0x%x,0x%x,0x%x,0x%x\n" , +dr32 (MacMode),dr32 (SIAStatus), +dr32 (CSR13 ),dr32 (CSR14 ),dr32 (CSR15 )); +netif_info (de, hw, de->dev,"set mode 0x%x, set sia 0x%x,0x%x,0x%x\n" , + macmode, de->media[media].csr13, + de->media[media].csr14, de->media[media].csr15);if (macmode !=dr32 (MacMode))dw32 (MacMode, macmode); }
@@ -996,9 +986,8 @@ static void de21040_media_timer (unsigned long data)if (!netif_carrier_ok (dev))de_link_up (de);else -if (netif_msg_timer (de)) -dev_info (&dev->dev,"%s link ok, status %x\n" , - media_name[de->media_type], status); +netif_info (de, timer, dev,"%s link ok, status %x\n" , + media_name[de->media_type], status);return ; }
@@ -1025,9 +1014,8 @@ no_link_yet: de->media_timer.expires = jiffies +DE_TIMER_NO_LINK ;add_timer (&de->media_timer); -if (netif_msg_timer (de)) -dev_info (&dev->dev,"no link, trying media %s, status %x\n" , - media_name[de->media_type], status); +netif_info (de, timer, dev,"no link, trying media %s, status %x\n" , + media_name[de->media_type], status); }static unsigned int de_ok_to_advertise (struct de_private *de,u32 new_media)
@@ -1085,11 +1073,10 @@ static void de21041_media_timer (unsigned long data)if (!netif_carrier_ok (dev))de_link_up (de);else -if (netif_msg_timer (de)) -dev_info (&dev->dev, -"%s link ok, mode %x status %x\n" , - media_name[de->media_type], -dr32 (MacMode), status); +netif_info (de, timer, dev, +"%s link ok, mode %x status %x\n" , + media_name[de->media_type], +dr32 (MacMode), status);return ; }
@@ -1163,9 +1150,8 @@ no_link_yet: de->media_timer.expires = jiffies +DE_TIMER_NO_LINK ;add_timer (&de->media_timer); -if (netif_msg_timer (de)) -dev_info (&dev->dev,"no link, trying media %s, status %x\n" , - media_name[de->media_type], status); +netif_info (de, timer, dev,"no link, trying media %s, status %x\n" , + media_name[de->media_type], status); }static void de_media_interrupt (struct de_private *de,u32 status)
@@ -1401,14 +1387,13 @@ static int de_open (struct net_device *dev)struct de_private *de =netdev_priv (dev);int rc; -if (netif_msg_ifup (de)) -printk (KERN_DEBUG "%s: enabling interface\n" , dev->name); +netif_printk (de, ifup,KERN_DEBUG , dev,"enabling interface\n" ); de->rx_buf_sz = (dev->mtu <=1500 ?PKT_BUF_SZ : dev->mtu +32 ); rc =de_alloc_rings (de);if (rc) { -dev_err (&dev->dev,"ring allocation failure, err=%d\n" , rc); +netdev_err (dev,"ring allocation failure, err=%d\n" , rc);return rc; }
@@ -1416,14 +1401,14 @@ static int de_open (struct net_device *dev) rc =request_irq (dev->irq, de_interrupt,IRQF_SHARED , dev->name, dev);if (rc) { -dev_err (&dev->dev,"IRQ %d request failure, err=%d\n" , - dev->irq, rc); +netdev_err (dev,"IRQ %d request failure, err=%d\n" , + dev->irq, rc); goto err_out_free; } rc =de_init_hw (de);if (rc) { -dev_err (&dev->dev,"h/w init failure, err=%d\n" , rc); +netdev_err (dev,"h/w init failure, err=%d\n" , rc); goto err_out_free_irq; }
@@ -1444,8 +1429,7 @@ static int de_close (struct net_device *dev)struct de_private *de =netdev_priv (dev);unsigned long flags; -if (netif_msg_ifdown (de)) -printk (KERN_DEBUG "%s: disabling interface\n" , dev->name); +netif_printk (de, ifdown,KERN_DEBUG , dev,"disabling interface\n" );del_timer_sync (&de->media_timer);
@@ -1466,9 +1450,10 @@ static void de_tx_timeout (struct net_device *dev) {struct de_private *de =netdev_priv (dev); -printk (KERN_DEBUG "%s: NIC status %08x mode %08x sia %08x desc %u/%u/%u\n" , - dev->name,dr32 (MacStatus),dr32 (MacMode),dr32 (SIAStatus), - de->rx_tail, de->tx_head, de->tx_tail); +netdev_printk (KERN_DEBUG , dev, +"NIC status %08x mode %08x sia %08x desc %u/%u/%u\n" , +dr32 (MacStatus),dr32 (MacMode),dr32 (SIAStatus), + de->rx_tail, de->tx_head, de->tx_tail);del_timer_sync (&de->media_timer);
@@ -1693,9 +1678,8 @@ static int de_nway_reset(struct net_device *dev) status =dr32 (SIAStatus);dw32 (SIAStatus, (status & ~NWayState) | NWayRestart); -if (netif_msg_link (de)) -dev_info (&de->dev->dev,"link nway restart, status %x,%x\n" , - status,dr32 (SIAStatus)); +netif_info (de, link, dev,"link nway restart, status %x,%x\n" , + status,dr32 (SIAStatus));return 0 ; }
@@ -1740,7 +1724,8 @@ static void __devinit de21040_get_mac_address (struct de_private *de) de->dev->dev_addr[i] = value;udelay (1 );if (boguscnt <=0 ) -pr_warning (PFX "timeout reading 21040 MAC address byte %u\n" , i); +pr_warn ("timeout reading 21040 MAC address byte %u\n" , + i); } }
@@ -1926,8 +1911,10 @@ static void __devinit de21041_get_srom_info (struct de_private *de) de->media[idx].csr14, de->media[idx].csr15); - }else if (netif_msg_probe (de)) -pr_cont ("\n" ); + }else { +if (netif_msg_probe (de)) +pr_cont ("\n" ); + }if (bufp > ((void *)&ee_data[DE_EEPROM_SIZE -3 ]))break ;
@@ -2038,7 +2025,7 @@ static int __devinit de_init_one (struct pci_dev *pdev,/* check for invalid IRQ value */ if (pdev->irq <2 ) { rc = -EIO ; -pr_err (PFX "invalid irq (%d) for pci dev %s\n" , +pr_err ("invalid irq (%d) for pci dev %s\n" , pdev->irq,pci_name (pdev)); goto err_out_res; }
@@ -2049,12 +2036,12 @@ static int __devinit de_init_one (struct pci_dev *pdev, pciaddr =pci_resource_start (pdev,1 );if (!pciaddr) { rc = -EIO ; -pr_err (PFX "no MMIO resource for pci dev %s\n" ,pci_name (pdev)); +pr_err ("no MMIO resource for pci dev %s\n" ,pci_name (pdev)); goto err_out_res; }if (pci_resource_len (pdev,1 ) <DE_REGS_SIZE ) { rc = -EIO ; -pr_err (PFX "MMIO resource (%llx) too small on pci dev %s\n" , +pr_err ("MMIO resource (%llx) too small on pci dev %s\n" , (unsigned long long )pci_resource_len (pdev,1 ),pci_name (pdev)); goto err_out_res;
@@ -2064,7 +2051,7 @@ static int __devinit de_init_one (struct pci_dev *pdev, regs =ioremap_nocache (pciaddr,DE_REGS_SIZE );if (!regs) { rc = -EIO ; -pr_err (PFX "Cannot map PCI MMIO (%llx@%lx) on pci dev %s\n" , +pr_err ("Cannot map PCI MMIO (%llx@%lx) on pci dev %s\n" , (unsigned long long )pci_resource_len (pdev,1 ), pciaddr,pci_name (pdev)); goto err_out_res;
@@ -2077,7 +2064,7 @@ static int __devinit de_init_one (struct pci_dev *pdev,/* make sure hardware is not running */ rc =de_reset_mac (de);if (rc) { -pr_err (PFX "Cannot reset MAC, pci dev %s\n" ,pci_name (pdev)); +pr_err ("Cannot reset MAC, pci dev %s\n" ,pci_name (pdev)); goto err_out_iomap; }
@@ -2097,11 +2084,11 @@ static int __devinit de_init_one (struct pci_dev *pdev, goto err_out_iomap;/* print info about board and interface just registered */ -dev_info (&dev->dev,"%s at 0x%lx, %pM, IRQ %d\n" , - de->de21040 ?"21040" :"21041" , - dev->base_addr, - dev->dev_addr, - dev->irq); +netdev_info (dev,"%s at 0x%lx, %pM, IRQ %d\n" , + de->de21040 ?"21040" :"21041" , + dev->base_addr, + dev->dev_addr, + dev->irq);pci_set_drvdata (pdev, dev);
@@ -2189,7 +2176,7 @@ static int de_resume (struct pci_dev *pdev)if (!netif_running (dev)) goto out_attach;if ((retval =pci_enable_device (pdev))) { -dev_err (&dev->dev,"pci_enable_device failed in resume\n" ); +netdev_err (dev,"pci_enable_device failed in resume\n" ); goto out; }pci_set_master (pdev);
drivers/net/tulip/dmfe.c +1 -1
@@ -406,7 +406,7 @@ static int __devinit dmfe_init_one (struct pci_dev *pdev,SET_NETDEV_DEV (dev, &pdev->dev);if (pci_set_dma_mask (pdev,DMA_BIT_MASK (32 ))) { -pr_warning ("32-bit PCI DMA not available\n" ); +pr_warn ("32-bit PCI DMA not available\n" ); err = -ENODEV ; goto err_out_free; }
drivers/net/tulip/eeprom.c +2 -2
@@ -222,8 +222,8 @@ subsequent_board:/* there is no phy information, don't even try to build mtable */ if (count ==0 ) {if (tulip_debug >0 ) -pr_warning ("%s: no phy info, aborting mtable build\n" , - dev->name); +pr_warn ("%s: no phy info, aborting mtable build\n" , + dev->name);return ; }
drivers/net/tulip/tulip_core.c +11 -14
@@ -12,6 +12,7 @@Please submit bugs to http://bugzilla.kernel.org/ . */ +#define pr_fmt (fmt) "tulip: " fmt#define DRV_NAME "tulip"#ifdef CONFIG_TULIP_NAPI
@@ -119,8 +120,6 @@ module_param(csr0, int, 0);module_param_array (options, int,NULL ,0 );module_param_array (full_duplex, int,NULL ,0 ); -#define PFX DRV_NAME ": " -#ifdef TULIP_DEBUG int tulip_debug =TULIP_DEBUG ;#else
@@ -1340,13 +1339,13 @@ static int __devinit tulip_init_one (struct pci_dev *pdev,*/ if (pdev->subsystem_vendor ==PCI_VENDOR_ID_LMC ) { -pr_err (PFX "skipping LMC card\n" ); +pr_err ("skipping LMC card\n" );return -ENODEV ; }else if (pdev->subsystem_vendor ==PCI_VENDOR_ID_SBE && (pdev->subsystem_device ==PCI_SUBDEVICE_ID_SBE_T3E3 || pdev->subsystem_device ==PCI_SUBDEVICE_ID_SBE_2T3E3_P0 || pdev->subsystem_device ==PCI_SUBDEVICE_ID_SBE_2T3E3_P1 )) { -pr_err (PFX "skipping SBE T3E3 port\n" ); +pr_err ("skipping SBE T3E3 port\n" );return -ENODEV ; }
@@ -1362,13 +1361,13 @@ static int __devinit tulip_init_one (struct pci_dev *pdev,if (pdev->vendor ==0x1282 && pdev->device ==0x9100 && pdev->revision <0x30 ) { -pr_info (PFX "skipping early DM9100 with Crc bug (use dmfe)\n" ); +pr_info ("skipping early DM9100 with Crc bug (use dmfe)\n" );return -ENODEV ; } dp =pci_device_to_OF_node (pdev);if (!(dp &&of_get_property (dp,"local-mac-address" ,NULL ))) { -pr_info (PFX "skipping DM910x expansion card (use dmfe)\n" ); +pr_info ("skipping DM910x expansion card (use dmfe)\n" );return -ENODEV ; } }
@@ -1415,16 +1414,14 @@ static int __devinit tulip_init_one (struct pci_dev *pdev, i =pci_enable_device (pdev);if (i) { -pr_err (PFX "Cannot enable tulip board #%d, aborting\n" , - board_idx); +pr_err ("Cannot enable tulip board #%d, aborting\n" , board_idx);return i; }/* The chip will fail to enter a low-power state later unless * first explicitly commanded into D0 */ if (pci_set_power_state (pdev,PCI_D0 )) { - printk (KERN_NOTICE PFX - "Failed to set power state to D0\n"); +pr_notice ("Failed to set power state to D0\n" ); } irq = pdev->irq;
@@ -1432,13 +1429,13 @@ static int __devinit tulip_init_one (struct pci_dev *pdev,/* alloc_etherdev ensures aligned and zeroed private structures */ dev =alloc_etherdev (sizeof (*tp));if (!dev) { -pr_err (PFX "ether device alloc failed, aborting\n" ); +pr_err ("ether device alloc failed, aborting\n" );return -ENOMEM ; }SET_NETDEV_DEV (dev, &pdev->dev);if (pci_resource_len (pdev,0 ) < tulip_tbl[chip_idx].io_size) { -pr_err (PFX "%s: I/O region (0x%llx@0x%llx) too small, aborting\n" , +pr_err ("%s: I/O region (0x%llx@0x%llx) too small, aborting\n" ,pci_name (pdev), (unsigned long long )pci_resource_len (pdev,0 ), (unsigned long long )pci_resource_start (pdev,0 ));
@@ -1905,12 +1902,12 @@ static int tulip_resume(struct pci_dev *pdev)return 0 ;if ((retval =pci_enable_device (pdev))) { -pr_err (PFX "pci_enable_device failed in resume\n" ); +pr_err ("pci_enable_device failed in resume\n" );return retval; }if ((retval =request_irq (dev->irq, tulip_interrupt,IRQF_SHARED , dev->name, dev))) { -pr_err (PFX "request_irq failed in resume\n" ); +pr_err ("request_irq failed in resume\n" );return retval; }
drivers/net/tulip/uli526x.c +18 -24
108 lines not on this page · raw message
drivers/net/tulip/winbond-840.c +4 -2
@@ -44,6 +44,8 @@* Wake-On-LAN */ +#define pr_fmt (fmt) KBUILD_MODNAME ": " fmt +#define DRV_NAME "winbond-840"#define DRV_VERSION "1.01-e"#define DRV_RELDATE "Sep-11-2006"
@@ -375,8 +377,8 @@ static int __devinit w840_probe1 (struct pci_dev *pdev, irq = pdev->irq;if (pci_set_dma_mask (pdev,DMA_BIT_MASK (32 ))) { -pr_warning ("Winbond-840: Device %s disabled due to DMA limitations\n" , -pci_name (pdev)); +pr_warn ("Device %s disabled due to DMA limitations\n" , +pci_name (pdev));return -EIO ; } dev =alloc_etherdev (sizeof (*np));
drivers/net/tulip/xircom_cb.c +71 -61
211 lines not on this page · raw message
Signature · 1 line
1.7.5.rc3.dirty
Re: [PATCH net-next 2/4] tulip: Convert printks to netdev_<level>
From: Joe Perches <[email protected]>
Date: Mon, 9 May 2011 12:45:21 -0700
Quoted 7 lines
Use the current more descriptive logging styles.
Add
pr_fmtand remove PFX where appropriate. Use netif_<level>, netdev_<level>
Indent a few blocks inxircom_cbwhere appropriate.Signed-off-by Joe Perches <[email protected]>
Applied.
PATCH 3/4 tulip: Convert uses of KERN_DEBUG
In reply to Joe PerchesConvert logging messages to more current styles.
Added -DDEBUG to Makefile to maintain current message logging. This could be converted to a specific CONFIG_TULIP_DEBUG option.
--- drivers/net/tulip/21142.c | 14 ++++---- drivers/net/tulip/Makefile | 2 + drivers/net/tulip/de2104x.c | 47 +++++++++++-------------- drivers/net/tulip/interrupt.c | 48 +++++++++++++------------- drivers/net/tulip/media.c | 49 +++++++++++++------------- drivers/net/tulip/pnic.c | 22 ++++++------ drivers/net/tulip/pnic2.c | 16 ++++---- drivers/net/tulip/timer.c | 47 ++++++++++++------------- drivers/net/tulip/tulip.h | 8 ++--- drivers/net/tulip/tulip_core.c | 20 +++++------ drivers/net/tulip/winbond-840.c | 73 ++++++++++++++++++--------------------- drivers/net/tulip/xircom_cb.c | 2 +- 12 files changed, 166 insertions(+), 182 deletions(-)
drivers/net/tulip/21142.c +7 -7
@@ -122,8 +122,8 @@ void t21142_start_nway(struct net_device *dev) tp->nway = tp->mediasense =1 ; tp->nwayset = tp->lpar =0 ;if (tulip_debug >1 ) -printk (KERN_DEBUG "%s: Restarting 21143 autonegotiation, csr14=%08x\n" , - dev->name, csr14); +netdev_dbg (dev,"Restarting 21143 autonegotiation, csr14=%08x\n" , + csr14);iowrite32 (0x0001 , ioaddr +CSR13 );udelay (100 );iowrite32 (csr14, ioaddr +CSR14 );
@@ -206,14 +206,14 @@ void t21142_lnk_change(struct net_device *dev, int csr5)#if 0 /* Restart shouldn't be needed. */ iowrite32 (tp->csr6 | RxOn, ioaddr +CSR6 );if (tulip_debug >2 ) -printk (KERN_DEBUG "%s: Restarting Tx and Rx, CSR5 is %08x\n" , - dev->name,ioread32 (ioaddr +CSR5 )); +netdev_dbg (dev," Restarting Tx and Rx, CSR5 is %08x\n" , +ioread32 (ioaddr +CSR5 ));#endif tulip_start_rxtx (tp);if (tulip_debug >2 ) -printk (KERN_DEBUG "%s: Setting CSR6 %08x/%x CSR12 %08x\n" , - dev->name, tp->csr6,ioread32 (ioaddr +CSR6 ), -ioread32 (ioaddr +CSR12 )); +netdev_dbg (dev," Setting CSR6 %08x/%x CSR12 %08x\n" , + tp->csr6,ioread32 (ioaddr +CSR6 ), +ioread32 (ioaddr +CSR12 )); } else if ((tp->nwayset && (csr5 & 0x08000000) && (dev->if_port == 3 || dev->if_port == 5) && (csr12 & 2) == 2) ||
drivers/net/tulip/Makefile +2 -0
@@ -2,6 +2,8 @@ # Makefile for the Linux "Tulip" family network device drivers. # +ccflags-$(CONFIG_NET_TULIP) := -DDEBUG + obj-$(CONFIG_PCMCIA_XIRCOM) += xircom_cb.o obj-$(CONFIG_DM9102) += dmfe.o obj-$(CONFIG_WINBOND_840) += winbond-840.o
drivers/net/tulip/de2104x.c +21 -26
101 lines not on this page · raw message
drivers/net/tulip/interrupt.c +24 -24
110 lines not on this page · raw message
drivers/net/tulip/media.c +24 -25
109 lines not on this page · raw message
drivers/net/tulip/pnic.c +11 -11
@@ -40,8 +40,8 @@ void pnic_do_nway(struct net_device *dev) new_csr6 |=0x00000200 ; }if (tulip_debug >1 ) -printk (KERN_DEBUG "%s: PNIC autonegotiated status %08x, %s\n" , - dev->name, phy_reg, medianame[dev->if_port]); +netdev_dbg (dev,"PNIC autonegotiated status %08x, %s\n" , + phy_reg, medianame[dev->if_port]);if (tp->csr6 != new_csr6) { tp->csr6 = new_csr6;/* Restart Tx */
@@ -58,8 +58,8 @@ void pnic_lnk_change(struct net_device *dev, int csr5)int phy_reg =ioread32 (ioaddr +0xB8 );if (tulip_debug >1 ) -printk (KERN_DEBUG "%s: PNIC link changed state %08x, CSR5 %08x\n" , - dev->name, phy_reg, csr5); +netdev_dbg (dev,"PNIC link changed state %08x, CSR5 %08x\n" , + phy_reg, csr5);if (ioread32 (ioaddr +CSR5 ) & TPLnkFail) {iowrite32 ((ioread32 (ioaddr +CSR7 ) & ~TPLnkFail) | TPLnkPass, ioaddr +CSR7 );/* If we use an external MII, then we mustn't use the
@@ -114,8 +114,8 @@ void pnic_timer(unsigned long data)int csr5 =ioread32 (ioaddr +CSR5 );if (tulip_debug >1 ) -printk (KERN_DEBUG "%s: PNIC timer PHY status %08x, %s CSR5 %08x\n" , - dev->name, phy_reg, medianame[dev->if_port], csr5); +netdev_dbg (dev,"PNIC timer PHY status %08x, %s CSR5 %08x\n" , + phy_reg, medianame[dev->if_port], csr5);if (phy_reg &0x04000000 ) {/* Remote link fault */ iowrite32 (0x0201F078 , ioaddr +0xB8 ); next_tick =1 *HZ ;
@@ -125,11 +125,11 @@ void pnic_timer(unsigned long data) next_tick =60 *HZ ; }else if (csr5 & TPLnkFail) {/* 100baseTx link beat */ if (tulip_debug >1 ) -printk (KERN_DEBUG "%s: %s link beat failed, CSR12 %04x, CSR5 %08x, PHY %03x\n" , - dev->name, medianame[dev->if_port], - csr12, -ioread32 (ioaddr +CSR5 ), -ioread32 (ioaddr +0xB8 )); +netdev_dbg (dev,"%s link beat failed, CSR12 %04x, CSR5 %08x, PHY %03x\n" , + medianame[dev->if_port], + csr12, +ioread32 (ioaddr +CSR5 ), +ioread32 (ioaddr +0xB8 )); next_tick =3 *HZ ;if (tp->medialock) { }else if (tp->nwayset && (dev->if_port &1 )) {
drivers/net/tulip/pnic2.c +8 -8
@@ -125,8 +125,8 @@ void pnic2_start_nway(struct net_device *dev) csr14 |=0x00001184 ;if (tulip_debug >1 ) -printk (KERN_DEBUG "%s: Restarting PNIC2 autonegotiation, csr14=%08x\n" , - dev->name, csr14); +netdev_dbg (dev,"Restarting PNIC2 autonegotiation, csr14=%08x\n" , + csr14);/* tell pnic2_lnk_change we are doing an nway negotiation */ dev->if_port =0 ;
@@ -137,8 +137,7 @@ void pnic2_start_nway(struct net_device *dev) tp->csr6 =ioread32 (ioaddr +CSR6 );if (tulip_debug >1 ) -printk (KERN_DEBUG "%s: On Entry to Nway, csr6=%08x\n" , - dev->name, tp->csr6); +netdev_dbg (dev,"On Entry to Nway, csr6=%08x\n" , tp->csr6);/* mask off any bits not to touch * comment at top of file explains mask value
@@ -271,9 +270,10 @@ void pnic2_lnk_change(struct net_device *dev, int csr5)iowrite32 (1 , ioaddr +CSR13 );if (tulip_debug >2 ) -printk (KERN_DEBUG "%s: Setting CSR6 %08x/%x CSR12 %08x\n" , - dev->name, tp->csr6, -ioread32 (ioaddr +CSR6 ),ioread32 (ioaddr +CSR12 )); +netdev_dbg (dev,"Setting CSR6 %08x/%x CSR12 %08x\n" , + tp->csr6, +ioread32 (ioaddr +CSR6 ), +ioread32 (ioaddr +CSR12 ));/* now the following actually writes out the * new csr6 values
@@ -324,7 +324,7 @@ void pnic2_lnk_change(struct net_device *dev, int csr5)/* Link blew? Maybe restart NWay. */ if (tulip_debug >2 ) -printk (KERN_DEBUG "%s: Ugh! Link blew?\n" , dev->name); +netdev_dbg (dev,"Ugh! Link blew?\n" );del_timer_sync (&tp->timer);pnic2_start_nway (dev);
drivers/net/tulip/timer.c +22 -25
87 lines not on this page · raw message
drivers/net/tulip/tulip.h +3 -5
@@ -547,11 +547,9 @@ static inline void tulip_stop_rxtx(struct tulip_private *tp)udelay (10 );if (!i) -printk (KERN_DEBUG "%s: tulip_stop_rxtx() failed" -" (CSR5 0x%x CSR6 0x%x)\n" , -pci_name (tp->pdev), -ioread32 (ioaddr +CSR5 ), -ioread32 (ioaddr +CSR6 )); +netdev_dbg (tp->dev,"tulip_stop_rxtx() failed (CSR5 0x%x CSR6 0x%x)\n" , +ioread32 (ioaddr +CSR5 ), +ioread32 (ioaddr +CSR6 )); } }
drivers/net/tulip/tulip_core.c +9 -11
@@ -330,8 +330,7 @@ static void tulip_up(struct net_device *dev)udelay (100 );if (tulip_debug >1 ) -printk (KERN_DEBUG "%s: tulip_up(), irq==%d\n" , - dev->name, dev->irq); +netdev_dbg (dev,"tulip_up(), irq==%d\n" , dev->irq);iowrite32 (tp->rx_ring_dma, ioaddr +CSR3 );iowrite32 (tp->tx_ring_dma, ioaddr +CSR4 );
@@ -498,10 +497,10 @@ media_picked:iowrite32 (0 , ioaddr +CSR2 );/* Rx poll demand */ if (tulip_debug >2 ) { -printk (KERN_DEBUG "%s: Done tulip_up(), CSR0 %08x, CSR5 %08x CSR6 %08x\n" , - dev->name,ioread32 (ioaddr +CSR0 ), -ioread32 (ioaddr +CSR5 ), -ioread32 (ioaddr +CSR6 )); +netdev_dbg (dev,"Done tulip_up(), CSR0 %08x, CSR5 %08x CSR6 %08x\n" , +ioread32 (ioaddr +CSR0 ), +ioread32 (ioaddr +CSR5 ), +ioread32 (ioaddr +CSR6 )); }/* Set the timer to switch to check for link beat and perhaps switch
@@ -842,8 +841,7 @@ static int tulip_close (struct net_device *dev)tulip_down (dev);if (tulip_debug >1 ) -dev_printk (KERN_DEBUG , &dev->dev, -"Shutting down ethercard, status was %02x\n" , +netdev_dbg (dev,"Shutting down ethercard, status was %02x\n" ,ioread32 (ioaddr +CSR5 ));free_irq (dev->irq, dev);
@@ -1206,7 +1204,7 @@ static void __devinit tulip_mwi_config (struct pci_dev *pdev,u32 csr0;if (tulip_debug >3 ) -printk (KERN_DEBUG "%s: tulip_mwi_config()\n" ,pci_name (pdev)); +netdev_dbg (dev,"tulip_mwi_config()\n" ); tp->csr0 = csr0 =0 ;
@@ -1268,8 +1266,8 @@ static void __devinit tulip_mwi_config (struct pci_dev *pdev, out: tp->csr0 = csr0;if (tulip_debug >2 ) -printk (KERN_DEBUG "%s: MWI config cacheline=%d, csr0=%08x\n" , - pci_name(pdev), cache, csr0); +netdev_dbg (dev,"MWI config cacheline=%d, csr0=%08x\n" , + cache, csr0); }#endif
drivers/net/tulip/winbond-840.c +34 -39
169 lines not on this page · raw message
drivers/net/tulip/xircom_cb.c +1 -1
@@ -333,7 +333,7 @@ static irqreturn_t xircom_interrupt(int irq, void *dev_instance)if (link_status_changed (card)) {int newlink; -printk (KERN_DEBUG "xircom_cb: Link status has changed\n" ); +netdev_dbg (dev,"Link status has changed\n" ); newlink =link_status (card);netdev_info (dev,"Link is %d mbit\n" , newlink);if (newlink)
Signature · 1 line
1.7.5.rc3.dirty
Re: [PATCH net-next 3/4] tulip: Convert uses of KERN_DEBUG
From: Joe Perches <[email protected]>
Date: Mon, 9 May 2011 12:45:22 -0700
Quoted 6 lines
Convert logging messages to more current styles.
Added -DDEBUG to
Makefileto maintain current message logging. This could be converted to a specificCONFIG_TULIP_DEBUGoption.Signed-off-by Joe Perches <[email protected]>
Applied.
PATCH 4/4 tulip: Use pr_<level> where appropriate
In reply to Joe PerchesUse the current logging styles.
--- drivers/net/tulip/de2104x.c | 6 +++--- drivers/net/tulip/dmfe.c | 7 +++---- drivers/net/tulip/tulip_core.c | 5 +++-- drivers/net/tulip/uli526x.c | 23 ++++------------------- drivers/net/tulip/winbond-840.c | 2 +- 5 files changed, 14 insertions(+), 29 deletions(-)
drivers/net/tulip/de2104x.c +3 -3
@@ -53,7 +53,7 @@/* These identify the driver base version and may not be removed. */ static char version[] = -KERN_INFO DRV_NAME " PCI Ethernet driver v" DRV_VERSION " (" DRV_RELDATE ")\n"; +"PCI Ethernet driver v" DRV_VERSION " (" DRV_RELDATE ")" ;MODULE_AUTHOR ("Jeff Garzik <[email protected]>" );MODULE_DESCRIPTION ("Intel/Digital 21040/1 series PCI Ethernet driver" );
@@ -1978,7 +1978,7 @@ static int __devinit de_init_one (struct pci_dev *pdev,#ifndef MODULE if (board_idx ==0 ) -printk ("%s" , version); +pr_info ("%s\n" , version);#endif /* allocate a new ethernet device structure, and fill in defaults */
@@ -2200,7 +2200,7 @@ static struct pci_driver de_driver = {static int __init de_init (void ) {#ifdef MODULE -printk ("%s" , version); +pr_info ("%s\n" , version);#endif return pci_register_driver (&de_driver); }
drivers/net/tulip/dmfe.c +3 -4
@@ -295,8 +295,7 @@ enum dmfe_CR6_bits {/* Global variable declaration ----------------------------- */ static int __devinitdata printed_version;static const char version[]__devinitconst = - KERN_INFO DRV_NAME ": Davicom DM9xxx net driver, version " -DRV_VERSION " (" DRV_RELDATE ")\n" ; +"Davicom DM9xxx net driver, version " DRV_VERSION " (" DRV_RELDATE ")" ;static int dmfe_debug;static unsigned char dmfe_media_mode =DMFE_AUTO ;
@@ -381,7 +380,7 @@ static int __devinit dmfe_init_one (struct pci_dev *pdev,DMFE_DBUG (0 ,"dmfe_init_one()" ,0 );if (!printed_version++) -printk (version); +pr_info ("%s\n" , version);/* * SPARC on-board DM910x chips should be handled by the main
@@ -2203,7 +2202,7 @@ static int __init dmfe_init_module(void) {int rc; -printk (version); +pr_info ("%s\n" , version); printed_version =1 ;DMFE_DBUG (0 ,"init_module() " , debug);
drivers/net/tulip/tulip_core.c +3 -2
@@ -1478,7 +1478,8 @@ static int __devinit tulip_init_one (struct pci_dev *pdev,if (sig ==0x09811317 ) { tp->flags |=COMET_PM ; tp->wolinfo.supported =WAKE_PHY |WAKE_MAGIC ; -printk (KERN_INFO "tulip_init_one: Enabled WOL support for AN983B\n" ); +pr_info ("%s: Enabled WOL support for AN983B\n" , + __func__); } } tp->pdev = pdev;
@@ -1874,7 +1875,7 @@ save_state:tulip_set_wolopts (pdev, tp->wolinfo.wolopts); rc =pci_enable_wake (pdev, pstate, tp->wolinfo.wolopts);if (rc) -printk ("tulip: pci_enable_wake failed (%d)\n" , rc); +pr_err ("pci_enable_wake failed (%d)\n" , rc); }pci_set_power_state (pdev, pstate);
drivers/net/tulip/uli526x.c +4 -19
@@ -209,8 +209,7 @@ enum uli526x_CR6_bits {/* Global variable declaration ----------------------------- */ static int __devinitdata printed_version;static const char version[]__devinitconst = - KERN_INFO DRV_NAME ": ULi M5261/M5263 net driver, version " -DRV_VERSION " (" DRV_RELDATE ")\n" ; +"ULi M5261/M5263 net driver, version " DRV_VERSION " (" DRV_RELDATE ")" ;static int uli526x_debug;static unsigned char uli526x_media_mode =ULI526X_AUTO ;
@@ -283,7 +282,7 @@ static int __devinit uli526x_init_one (struct pci_dev *pdev,ULI526X_DBUG (0 ,"uli526x_init_one()" ,0 );if (!printed_version++) -printk (version); +pr_info ("%s\n" , version);/* Init network device */ dev =alloc_etherdev (sizeof (*db));
@@ -667,15 +666,6 @@ static int uli526x_stop(struct net_device *dev)/* free allocated rx buffer */ uli526x_free_rxbuffer (db); -#if 0 -/* show statistic counter */ -printk (DRV_NAME ": FU:%lx EC:%lx LC:%lx NC:%lx LOC:%lx TXJT:%lx RESET:%lx RCR8:%lx FAL:%lx TT:%lx\n" , - db->tx_fifo_underrun, db->tx_excessive_collision, - db->tx_late_collision, db->tx_no_carrier, db->tx_loss_carrier, - db->tx_jabber_timeout, db->reset_count, db->reset_cr8, - db->reset_fatal, db->reset_TXtimeout); -#endif -return 0 ; }
@@ -755,7 +745,6 @@ static void uli526x_free_tx_pkt(struct net_device *dev, txptr = db->tx_remove_ptr;while (db->tx_packet_cnt) { tdes0 =le32_to_cpu (txptr->tdes0); -/* printk(DRV_NAME ": tdes0=%x\n", tdes0); */ if (tdes0 &0x80000000 )break ;
@@ -765,7 +754,6 @@ static void uli526x_free_tx_pkt(struct net_device *dev,/* Transmit statistic counter */ if ( tdes0 !=0x7fffffff ) { -/* printk(DRV_NAME ": tdes0=%x\n", tdes0); */ dev->stats.collisions += (tdes0 >>3 ) &0xf ; dev->stats.tx_bytes +=le32_to_cpu (txptr->tdes1) &0x7ff ;if (tdes0 &TDES0_ERR_MASK ) {
@@ -838,7 +826,6 @@ static void uli526x_rx_packet(struct net_device *dev, struct uli526x_board_info/* error summary bit check */ if (rdes0 &0x8000 ) {/* This is a error packet */ -//printk(DRV_NAME ": rdes0: %lx\n", rdes0); dev->stats.rx_errors++;if (rdes0 &1 ) dev->stats.rx_fifo_errors++;
@@ -1046,8 +1033,7 @@ static void uli526x_timer(unsigned long data)if (time_after (jiffies,dev_trans_start (dev) +ULI526X_TX_TIMEOUT ) ) { db->reset_TXtimeout++; db->wait_reset =1 ; -printk ("%s: Tx timeout - resetting\n" , - dev->name); +netdev_err (dev," Tx timeout - resetting\n" ); } }
@@ -1534,7 +1520,6 @@ static u8 uli526x_sense_speed(struct uli526x_board_info * db)else phy_mode =0x1000 ; -/* printk(DRV_NAME ": Phy_mode %x ",phy_mode); */ switch (phy_mode) {case 0x1000 : db->op_mode =ULI526X_10MHF ;break ;case 0x2000 : db->op_mode =ULI526X_10MFD ;break ;
@@ -1823,7 +1808,7 @@ MODULE_PARM_DESC(mode, "ULi M5261/M5263: Bit 0: 10/100Mbps, bit 2: duplex, bit 8static int __init uli526x_init_module (void ) { -printk (version); +pr_info ("%s\n" , version); printed_version =1 ;ULI526X_DBUG (0 ,"init_module() " , debug);
drivers/net/tulip/winbond-840.c +1 -1
@@ -141,7 +141,7 @@ static int full_duplex[MAX_UNITS] = {-1, -1, -1, -1, -1, -1, -1, -1};/* These identify the driver base version and may not be removed. */ static const char version[]__initconst = - KERN_INFO DRV_NAME ".c:v" DRV_VERSION " (2.4 port) " +"v" DRV_VERSION " (2.4 port) " DRV_RELDATE " Donald Becker <[email protected]>\n" " http://www.scyld.com/network/drivers.html\n" ;
Signature · 1 line
1.7.5.rc3.dirty
Re: [PATCH net-next 4/4] tulip: Use pr_<level> where appropriate
From: Joe Perches <[email protected]>
Date: Mon, 9 May 2011 12:45:23 -0700
Quoted 3 lines
Use the current logging styles.
Signed-off-by Joe Perches <[email protected]>
Applied.