i before e except after c typos

index d4455ff..e8f6e65 100644
@@ -1625,8 +1625,8 @@ static void __vub300_command_response(struct vub300_mmc_host *vub300,
 		cmd->error = respretval;
 	} else if (cmd->error) {
 		/*
-		 * the error occured sending the command
-		 * or recieving the response
+		 * the error occurred sending the command
+		 * or receiving the response
 		 */
 	} else if (vub300->command_out_urb->status) {
 		vub300->usb_transport_fail = vub300->command_out_urb->status;

index 7a8ce612..016108a 100644
@@ -988,7 +988,7 @@ int cfhsi_probe(struct platform_device *pdev)
 		goto err_alloc_rx;
 	}
 
-	/* Initialize recieve vaiables. */
+	/* Initialize receive variables. */
 	cfhsi->rx_ptr = cfhsi->rx_buf;
 	cfhsi->rx_len = CFHSI_DESC_SZ;
 

index 01ad452..a1d202d 100644
@@ -380,7 +380,7 @@ struct lmc___softc {
 /* CSR6 settings */
 #define OPERATION_MODE  0x00000200 /* Full Duplex      */
 #define PROMISC_MODE    0x00000040 /* Promiscuous Mode */
-#define RECIEVE_ALL     0x40000000 /* Receive All      */
+#define RECEIVE_ALL     0x40000000 /* Receive All      */
 #define PASS_BAD_FRAMES 0x00000008 /* Pass Bad Frames  */
 
 /* Dec control registers  CSR6 as well */

index b16bd3c..2f41089c 100644
@@ -187,7 +187,7 @@ struct usb_ftdi {
         u32 controlreg;
         u8 response[4 + 1024];
         int expected;
-        int recieved;
+        int received;
         int ed_found;
 };
 #define kref_to_usb_ftdi(d) container_of(d, struct usb_ftdi, kref)

@@ -353,7 +353,7 @@ static void ftdi_elan_abandon_targets(struct usb_ftdi *ftdi)
                         mutex_lock(&ftdi->u132_lock);
                 }
         }
-        ftdi->recieved = 0;
+        ftdi->received = 0;
         ftdi->expected = 4;
         ftdi->ed_found = 0;
         mutex_unlock(&ftdi->u132_lock);

@@ -411,7 +411,7 @@ static void ftdi_elan_flush_targets(struct usb_ftdi *ftdi)
                         }
                 }
         }
-        ftdi->recieved = 0;
+        ftdi->received = 0;
         ftdi->expected = 4;
         ftdi->ed_found = 0;
         mutex_unlock(&ftdi->u132_lock);

@@ -447,7 +447,7 @@ static void ftdi_elan_cancel_targets(struct usb_ftdi *ftdi)
                         }
                 }
         }
-        ftdi->recieved = 0;
+        ftdi->received = 0;
         ftdi->expected = 4;
         ftdi->ed_found = 0;
         mutex_unlock(&ftdi->u132_lock);

@@ -874,7 +874,7 @@ static char *have_ed_set_response(struct usb_ftdi *ftdi,
                         mutex_unlock(&ftdi->u132_lock);
                         ftdi_elan_do_callback(ftdi, target, 4 + ftdi->response,
                                 payload);
-                        ftdi->recieved = 0;
+                        ftdi->received = 0;
                         ftdi->expected = 4;
                         ftdi->ed_found = 0;
                         return ftdi->response;

@@ -890,7 +890,7 @@ static char *have_ed_set_response(struct usb_ftdi *ftdi,
                         mutex_unlock(&ftdi->u132_lock);
                         ftdi_elan_do_callback(ftdi, target, 4 + ftdi->response,
                                 payload);
-                        ftdi->recieved = 0;
+                        ftdi->received = 0;
                         ftdi->expected = 4;
                         ftdi->ed_found = 0;
                         return ftdi->response;

@@ -905,7 +905,7 @@ static char *have_ed_set_response(struct usb_ftdi *ftdi,
                 mutex_unlock(&ftdi->u132_lock);
                 ftdi_elan_do_callback(ftdi, target, 4 + ftdi->response,
                         payload);
-                ftdi->recieved = 0;
+                ftdi->received = 0;
                 ftdi->expected = 4;
                 ftdi->ed_found = 0;
                 return ftdi->response;

@@ -914,7 +914,7 @@ static char *have_ed_set_response(struct usb_ftdi *ftdi,
                 mutex_unlock(&ftdi->u132_lock);
                 ftdi_elan_do_callback(ftdi, target, 4 + ftdi->response,
                         payload);
-                ftdi->recieved = 0;
+                ftdi->received = 0;
                 ftdi->expected = 4;
                 ftdi->ed_found = 0;
                 return ftdi->response;

@@ -934,7 +934,7 @@ static char *have_ed_get_response(struct usb_ftdi *ftdi,
         if (target->active)
                 ftdi_elan_do_callback(ftdi, target, NULL, 0);
         target->abandoning = 0;
-        ftdi->recieved = 0;
+        ftdi->received = 0;
         ftdi->expected = 4;
         ftdi->ed_found = 0;
         return ftdi->response;

@@ -951,7 +951,7 @@ static char *have_ed_get_response(struct usb_ftdi *ftdi,
 */
 static int ftdi_elan_respond_engine(struct usb_ftdi *ftdi)
 {
-        u8 *b = ftdi->response + ftdi->recieved;
+        u8 *b = ftdi->response + ftdi->received;
         int bytes_read = 0;
         int retry_on_empty = 1;
         int retry_on_timeout = 3;

@@ -1043,11 +1043,11 @@ static int ftdi_elan_respond_engine(struct usb_ftdi *ftdi)
                 u8 c = ftdi->bulk_in_buffer[++ftdi->bulk_in_last];
                 bytes_read += 1;
                 ftdi->bulk_in_left -= 1;
-                if (ftdi->recieved == 0 && c == 0xFF) {
+                if (ftdi->received == 0 && c == 0xFF) {
                         goto have;
                 } else
                         *b++ = c;
-                if (++ftdi->recieved < ftdi->expected) {
+                if (++ftdi->received < ftdi->expected) {
                         goto have;
                 } else if (ftdi->ed_found) {
                         int ed_number = (ftdi->response[0] >> 5) & 0x03;

@@ -1069,7 +1069,7 @@ static int ftdi_elan_respond_engine(struct usb_ftdi *ftdi)
                         }
                         ftdi_elan_do_callback(ftdi, target, 4 + ftdi->response,
                                 payload);
-                        ftdi->recieved = 0;
+                        ftdi->received = 0;
                         ftdi->expected = 4;
                         ftdi->ed_found = 0;
                         b = ftdi->response;

@@ -1089,7 +1089,7 @@ static int ftdi_elan_respond_engine(struct usb_ftdi *ftdi)
                         *respond->value = data;
                         *respond->result = 0;
                         complete(&respond->wait_completion);
-                        ftdi->recieved = 0;
+                        ftdi->received = 0;
                         ftdi->expected = 4;
                         ftdi->ed_found = 0;
                         b = ftdi->response;

index 0a50799..572fb54 100644
@@ -262,7 +262,7 @@ int osd_execute_request_async(struct osd_request *or,
  * osd_req_decode_sense_full - Decode sense information after execution.
  *
  * @or:           - osd_request to examine
- * @osi           - Recievs a more detailed error report information (optional).
+ * @osi           - Receives a more detailed error report information (optional).
  * @silent        - Do not print to dmsg (Even if enabled)
  * @bad_obj_list  - Some commands act on multiple objects. Failed objects will
  *                  be received here (optional)

index b40095a..30fe0d0 100644
@@ -330,7 +330,7 @@ static int cx81801_hangup(struct tty_struct *tty)
 	return 0;
 }
 
-/* Line discipline .recieve_buf() */
+/* Line discipline .receive_buf() */
 static void cx81801_receive(struct tty_struct *tty,
 				const unsigned char *cp, char *fp, int count)
 {

index 0011055..5dfd119 100644
@@ -34,7 +34,7 @@
 #define CORGI_GPIO_LCDCON_CS		(19) /* LCD Control Chip Select */
 #define CORGI_GPIO_MAX1111_CS		(20) /* MAX1111 Chip Select */
 #define CORGI_GPIO_ADC_TEMP_ON		(21) /* Select battery voltage or temperature */
-#define CORGI_GPIO_IR_ON			(22) /* Enable IR Transciever */
+#define CORGI_GPIO_IR_ON			(22) /* Enable IR Transceiver */
 #define CORGI_GPIO_ADS7846_CS		(24) /* ADS7846 Chip Select */
 #define CORGI_GPIO_SD_PWR			(33) /* MMC/SD Power */
 #define CORGI_GPIO_CHRG_ON			(38) /* Enable battery Charging */

index ab1443f..4cf28f6 100644
@@ -56,9 +56,9 @@
 #define UDCFNR          __REG(0x40600014) /* UDC Frame Number Register */
 #define UDCOTGICR	__REG(0x40600018) /* UDC On-The-Go interrupt control */
 #define UDCOTGICR_IESF	(1 << 24)	/* OTG SET_FEATURE command recvd */
-#define UDCOTGICR_IEXR	(1 << 17)	/* Extra Transciever Interrupt
+#define UDCOTGICR_IEXR	(1 << 17)	/* Extra Transceiver Interrupt
 					   Rising Edge Interrupt Enable */
-#define UDCOTGICR_IEXF	(1 << 16)	/* Extra Transciever Interrupt
+#define UDCOTGICR_IEXF	(1 << 16)	/* Extra Transceiver Interrupt
 					   Falling Edge Interrupt Enable */
 #define UDCOTGICR_IEVV40R (1 << 9)	/* OTG Vbus Valid 4.0V Rising Edge
 					   Interrupt Enable */

index c0bc833..2735d03 100644
@@ -77,7 +77,7 @@ static struct regulator_consumer_supply ab8500_vtvout_consumers[] = {
 static struct regulator_consumer_supply ab8500_vintcore_consumers[] = {
 	/* SoC core supply, no device */
 	REGULATOR_SUPPLY("v-intcore", NULL),
-	/* USB Transciever */
+	/* USB Transceiver */
 	REGULATOR_SUPPLY("vddulpivio18", "ab8500-usb.0"),
 };
 

index 3df1bc8..3876a24 100644
@@ -227,7 +227,7 @@ static int highlander_i2c_read(struct highlander_i2c_dev *dev)
 
 	/*
 	 * The R0P7780LC0011RL FPGA needs a significant delay between
-	 * data read cycles, otherwise the transciever gets confused and
+	 * data read cycles, otherwise the transceiver gets confused and
 	 * garbage is returned when the read is subsequently aborted.
 	 *
 	 * It is not sufficient to wait for BBSY.

index 48ee51b..a192285 100644
@@ -365,7 +365,7 @@ static int __init do_express_probe(struct net_device *dev)
 			dev->irq = mca_irqmap[(pos1>>4)&0x7];
 
 			/*
-			 * XXX: Transciever selection is done
+			 * XXX: Transceiver selection is done
 			 * differently on the MCA version.
 			 * How to get it to select something
 			 * other than external/AUI is currently

index 99e1ec0..19ad460 100644
@@ -78,7 +78,7 @@
  * Target hardware: IRWave IR320ST-2
  *
  * 	The IRWave IR320ST-2 is a simple dongle based on the Vishay/Temic
- * 	TOIM3232 SIR Endec and the Vishay/Temic TFDS4500 SIR IRDA transciever.
+ * 	TOIM3232 SIR Endec and the Vishay/Temic TFDS4500 SIR IRDA transceiver.
  * 	It uses a hex inverter and some discrete components to buffer and
  * 	line convert the RS232 down to 5V.
  *

index b78be08..ab28629 100644
@@ -2919,7 +2919,7 @@ static int netdev_set_ecmd(struct net_device *dev, struct ethtool_cmd *ecmd)
 
 	/*
 	 * If we're ignoring the PHY then autoneg and the internal
-	 * transciever are really not going to work so don't let the
+	 * transceiver are really not going to work so don't let the
 	 * user select them.
 	 */
 	if (np->ignore_phy && (ecmd->autoneg == AUTONEG_ENABLE ||

index 2b9a642..6b887d9 100644
@@ -769,7 +769,7 @@ pci_ni8430_setup(struct serial_private *priv,
 	len =  pci_resource_len(priv->dev, bar);
 	p = ioremap_nocache(base, len);
 
-	/* enable the transciever */
+	/* enable the transceiver */
 	writeb(readb(p + offset + NI8430_PORTCON) | NI8430_PORTCON_TXVR_ENABLE,
 	       p + offset + NI8430_PORTCON);
 

index cd16231..b01696e 100644
@@ -88,9 +88,9 @@
 #define UDCISR_INT_MASK	(UDCICR_FIFOERR | UDCICR_PKTCOMPL)
 
 #define UDCOTGICR_IESF	(1 << 24)	/* OTG SET_FEATURE command recvd */
-#define UDCOTGICR_IEXR	(1 << 17)	/* Extra Transciever Interrupt
+#define UDCOTGICR_IEXR	(1 << 17)	/* Extra Transceiver Interrupt
 					   Rising Edge Interrupt Enable */
-#define UDCOTGICR_IEXF	(1 << 16)	/* Extra Transciever Interrupt
+#define UDCOTGICR_IEXF	(1 << 16)	/* Extra Transceiver Interrupt
 					   Falling Edge Interrupt Enable */
 #define UDCOTGICR_IEVV40R (1 << 9)	/* OTG Vbus Valid 4.0V Rising Edge
 					   Interrupt Enable */

index c71b037..bcbd1ab 100644
@@ -1955,7 +1955,7 @@ musb_init_controller(struct device *dev, int nIrq, void __iomem *ctrl)
 	 *   - initializes musb->xceiv, usually by otg_get_transceiver()
 	 *   - stops powering VBUS
 	 *
-	 * There are various transciever configurations.  Blackfin,
+	 * There are various transceiver configurations.  Blackfin,
 	 * DaVinci, TUSB60x0, and others integrate them.  OMAP3 uses
 	 * external/discrete ones in various flavors (twl4030 family,
 	 * isp1504, non-OTG, etc) mostly hooking up through ULPI.

index 8c28225..ca9b690 100644
@@ -660,7 +660,7 @@ static irqreturn_t omap_otg_irq(int irq, void *_isp)
 	int		ret = IRQ_NONE;
 	struct isp1301	*isp = _isp;
 
-	/* update ISP1301 transciever from OTG controller */
+	/* update ISP1301 transceiver from OTG controller */
 	if (otg_irq & OPRT_CHG) {
 		omap_writew(OPRT_CHG, OTG_IRQ_SRC);
 		isp1301_defer_work(isp, WORK_UPDATE_ISP);

@@ -755,7 +755,7 @@ static irqreturn_t omap_otg_irq(int irq, void *_isp)
 		omap_writew(A_VBUS_ERR, OTG_IRQ_SRC);
 		ret = IRQ_HANDLED;
 
-	/* switch driver; the transciever code activates it,
+	/* switch driver; the transceiver code activates it,
 	 * ungating the udc clock or resuming OHCI.
 	 */
 	} else if (otg_irq & DRIVER_SWITCH) {

index be06fb3..0ccc0eb 100644
@@ -87,7 +87,7 @@ static char *id[SNDRV_CARDS] = SNDRV_DEFAULT_STR;	/* ID for this card */
 static int enable[SNDRV_CARDS] = SNDRV_DEFAULT_ENABLE_PNP;/* Enable this card */
 static char *model[SNDRV_CARDS];
 static int omni[SNDRV_CARDS];				/* Delta44 & 66 Omni I/O support */
-static int cs8427_timeout[SNDRV_CARDS] = {[0 ... (SNDRV_CARDS-1)] = 500}; /* CS8427 S/PDIF transciever reset timeout value in msec */
+static int cs8427_timeout[SNDRV_CARDS] = {[0 ... (SNDRV_CARDS-1)] = 500}; /* CS8427 S/PDIF transceiver reset timeout value in msec */
 static int dxr_enable[SNDRV_CARDS];			/* DXR enable for DMX6FIRE */
 
 module_param_array(index, int, NULL, 0444);