[CONSOLIDATED PULL 00/21]

index 28a70f3..290d8f2 100644
@@ -1,6 +1,6 @@
 require gcc-common.inc
 
-PR = "r7"
+PR = "r8"
 
 # Third digit in PV should be incremented after a minor release
 # happens from this branch on gcc e.g. currently its 4.6.0

@@ -62,7 +62,6 @@ SRC_URI = "svn://gcc.gnu.org/svn/gcc/branches;module=${BRANCH};proto=http \
 	   file://64bithack.patch \
 	   file://optional_libstdc.patch \
 	   file://disable_relax_pic_calls_flag.patch \
-	   file://gcc-poison-parameters.patch \
 	   file://GPLUSPLUS_INCLUDE_DIR_with_sysroot.patch \
 	   file://COLLECT_GCC_OPTIONS.patch \
            file://volatile_access_backport.patch \

76 lines not on this page · raw message

index 0c93237..e31f9af 100644
@@ -27,7 +27,7 @@ YOCTOADT_REPO="http://adtrepo.yoctoproject.org/$YOCTOADT_VERSION"
 
 # The following are for system wide setup
 # Target architectures that you want to setup host cross dev environment for
-# valid values are: powerpc, mips, arm, x86, x86_64 with space separation between entries
+# valid values are: arm, x86, x86_64, powerpc, mips with space separation between entries
 YOCTOADT_TARGETS="arm x86"
 # Whether install qemu or not, valid entries are: Y/N
 YOCTOADT_QEMU="Y"

@@ -40,7 +40,7 @@ YOCTOADT_NFS_UTIL="Y"
 
 #The followings are for setting up specific target architecture
 #YOCTOADT_ROOTFS_$arch is for specifying what root filesystem image files you want to download from the repository. The valid values to replace $arch are: arm, x86, x86_64, powerpc, mips.  The valid image files are: minimal, minimal-dev, sato, sato-dev, sato-sdk,lsb, lsb-dev, lsb-sdk.  If you want to download multiple images, the entries are space separated
-YOCTOADT_ROOTFS_arm="minimal sato-sdk"
+YOCTOADT_ROOTFS_arm="minimal"
 #Specify which root filesystem file to use to extract as target sysroot.  Please ensure the entry is in the list of downloaded root filesystem files that specified above in YOCTOADT_ROOTFS_$arch
 YOCTOADT_TARGET_SYSROOT_IMAGE_arm="minimal"
 #The location where the target sysroot will be setup

@@ -50,3 +50,16 @@ YOCTOADT_TARGET_SYSROOT_LOC_arm="$HOME/test-yocto/arm"
 #YOCTOADT_ROOTFS_x86="sato-sdk"
 #YOCTOADT_TARGET_SYSROOT_IMAGE_x86="sato-sdk"
 #YOCTOADT_TARGET_SYSROOT_LOC_x86="$HOME/test-yocto/x86"
+
+#Here's some template of other arches, which you need to change the value in ""
+#YOCTOADT_TARGET_SYSROOT_IMAGE_x86_64=""
+#YOCTOADT_TARGET_SYSROOT_LOC_x86_64=""
+#YOCTOADT_ROOTFS_x86_64=""
+
+#YOCTOADT_TARGET_SYSROOT_IMAGE_powerpc=""
+#YOCTOADT_TARGET_SYSROOT_LOC_powerpc=""
+#YOCTOADT_ROOTFS_powerpc=""
+
+#YOCTOADT_TARGET_SYSROOT_IMAGE_mips=""
+#YOCTOADT_TARGET_SYSROOT_LOC_mips=""
+#YOCTOADT_ROOTFS_mips=""

index 870931e..c7de0e2 100755
@@ -105,7 +105,7 @@ $OPKG_INSTALL_NATIVE_CMD libtool-nativesdk &>> $YOCTOADT_INSTALL_LOG_FILE
 check_result
 
 for native_target_type in $YOCTOADT_TARGETS; do
-  native_target_type=`echo "$native_target_type" | sed -e 's/x86_64/x86-64/' -e 's/ppc/powerpc/'  -e 's/x86$/i586/'`
+  native_target_type=`echo "$native_target_type" | sed -e 's/x86_64/x86-64/' -e 's/x86$/i586/'`
   echo_info "Installing cross toolchain for $native_target_type ..."
   echo_info "Installing binutils for $native_target_type ..."
   $OPKG_INSTALL_NATIVE_CMD binutils-cross-canadian-$native_target_type &>> $YOCTOADT_INSTALL_LOG_FILE

index 2781e77..1de21d7 100644
@@ -32,7 +32,7 @@ OPKG_LIBDIR="/var/lib"
 # List all supported root fs types and target types,
 # it will be used in user configuration validity checking
 YOCTOADT_SUPPORTED_ROOTFS="minimal minimal-dev sato sato-dev sato-sdk lsb lsb-dev lsb-sdk"
-YOCTOADT_SUPPORTED_TARGETS="x86 x86_64 arm ppc mips"
+YOCTOADT_SUPPORTED_TARGETS="x86 x86_64 arm powerpc mips"
 # Different host (32 bit or 64 bit) will have different opkg
 # configuration files
 YOCTOADT_OPKG_CONF_FILE_32="./opkg/conf/opkg-sdk-i686.conf"

index 96675de..15c4142 100644
@@ -184,7 +184,7 @@ python () {
         # shlibs requires any DEPENDS to have already packaged for the *.list files
         deps.append("do_package")
         bb.data.setVarFlag('do_package', 'deptask', " ".join(deps), d)
-    else:
+    elif not bb.data.inherits_class('image', d):
         d.setVar("PACKAGERDEPTASK", "")
 }
 

index c15632d..883fa5b 100755
@@ -384,7 +384,7 @@ if [ "$MACHINE" = "qemuppc" ]; then
     BIOS=powerpc_rom.bin
     QEMU_UI_OPTIONS="$QEMU_UI_OPTIONS -nographic"
     if [ "$FSTYPE" = "ext3" -o "$FSTYPE" = "btrfs" ]; then
-        KERNCMDLINE="root=/dev/hda rw console=ttyS0 console=tty0 $KERNEL_NETWORK_CMD mem=$QEMU_MEMORY"
+        KERNCMDLINE="root=/dev/hda rw console=ttyS0 3 $KERNEL_NETWORK_CMD mem=$QEMU_MEMORY"
         QEMUOPTIONS="$QEMU_NETWORK_CMD -cpu $CPU_SUBTYPE -M $MACHINE_SUBTYPE -bios $BIOS -hda $ROOTFS -no-reboot $QEMU_UI_OPTIONS"
     fi
     if [ "$FSTYPE" = "nfs" ]; then

@@ -393,7 +393,7 @@ if [ "$MACHINE" = "qemuppc" ]; then
             cleanup
             return
         fi
-        KERNCMDLINE="root=/dev/nfs console=ttyS0 console=tty0 nfsroot=$NFS_SERVER:$NFS_DIR,$UNFS_OPTS rw $KERNEL_NETWORK_CMD mem=$QEMU_MEMORY"
+        KERNCMDLINE="root=/dev/nfs console=ttyS0 3 nfsroot=$NFS_SERVER:$NFS_DIR,$UNFS_OPTS rw $KERNEL_NETWORK_CMD mem=$QEMU_MEMORY"
         QEMUOPTIONS="$QEMU_NETWORK_CMD -cpu $CPU_SUBTYPE -M $MACHINE_SUBTYPE -bios $BIOS -no-reboot $QEMU_UI_OPTIONS"
     fi
 fi

index aa1cc95..f2991f2 100644
@@ -1,6 +1,6 @@
 require gcc-common.inc
 
-PR = "r8"
+PR = "r9"
 
 DEPENDS =+ "mpfr gmp libmpc elfutils"
 NATIVEDEPS = "mpfr-native gmp-native gettext-native libmpc-native elfutils-native"

@@ -56,7 +56,6 @@ SRC_URI = "${GNU_MIRROR}/gcc/gcc-${PV}/gcc-${PV}.tar.bz2 \
 	   file://64bithack.patch \
 	   file://optional_libstdc.patch \
 	   file://disable_relax_pic_calls_flag.patch \
-	   file://gcc-poison-parameters.patch \
 	   file://GPLUSPLUS_INCLUDE_DIR_with_sysroot.patch \
 	   file://COLLECT_GCC_OPTIONS.patch \
 	   file://use-defaults.h-and-t-oe-in-B.patch \

@@ -66,6 +65,7 @@ SRC_URI = "${GNU_MIRROR}/gcc/gcc-${PV}/gcc-${PV}.tar.bz2 \
 	   file://pr45094.patch \
 	   file://pr45052.patch \
 	   file://pr45886.patch \
+	   file://pr44618.patch \
 	  "
 	
 SRC_URI_append_sh3  = " file://sh3-installfix-fixheaders.patch "

85 lines not on this page · raw message

314 lines not on this page · raw message

index b309516..b3ff047 100644
@@ -53,6 +53,7 @@ bindir_cross = "/bin"
 bindir_crossscripts = "${bindir}/crossscripts"
 prefix_nativesdk = "/usr"
 bindir_nativesdk = "${prefix_nativesdk}/bin"
+includedir_nativesdk = "${prefix_nativesdk}/include"
 libdir_nativesdk = "${prefix_nativesdk}/lib"
 base_libdir_nativesdk = "/lib"
 localstatedir_nativesdk = "/var"

index 64e7574..4fa9562 100644
@@ -4,7 +4,7 @@ inherit cmake
 
 DEPENDS += "curl expat zlib libarchive ncurses"
 
-PR = "${INC_PR}.1"
+PR = "${INC_PR}.2"
 
 SRC_URI += "file://dont-run-cross-binaries.patch"
 

@@ -33,12 +33,6 @@ EXTRA_OECMAKE=" \
     ${@base_contains('DISTRO_FEATURES', 'largefile', '-DKWSYS_LFS_WORKS=1', '-DKWSYS_LFS_DISABLE=1', d)} \
 "
 
-# FIXME: Hack due gcc-crosssdk not being able to detect those automatically
-CXXFLAGS_virtclass-nativesdk += " \
-   -I${STAGING_DIR_HOST}${SDKPATHNATIVE}/usr/include/c++ \
-   -I${STAGING_DIR_HOST}${SDKPATHNATIVE}/usr/include/c++/${TARGET_SYS} \
-   "
-
 FILES_${PN} += "${datadir}/cmake-${CMAKE_MAJOR_VERSION}"
 FILES_${PN}-doc += "${docdir}/cmake-${CMAKE_MAJOR_VERSION}"
 

index cc83b72..068528e 100644
@@ -4,7 +4,7 @@ SECTION = "libs"
 HOMEPAGE = "http://qt.nokia.com"
 LICENSE = "LGPLv2.1 | GPLv3"
 
-INC_PR = "r4"
+INC_PR = "r5"
 
 FILESEXTRAPATHS =. "${FILE_DIRNAME}/qt-${PV}:"
 

@@ -43,13 +43,8 @@ EXTRA_OECONF = "-prefix ${prefix} \
                 -arch ${@qt_arch(d)} \
                 -embedded -no-freetype -no-glib -no-iconv \
                 -qt3support \
-                -I${STAGING_DIR_HOST}${SDKPATHNATIVE}/usr/include \
                 -I${STAGING_DIR_HOST}${SDKPATHNATIVE}/usr/include/dbus-1.0 \
-                -I${STAGING_DIR_HOST}${SDKPATHNATIVE}/usr/lib/dbus-1.0/include \
-                -I${STAGING_DIR_HOST}${SDKPATHNATIVE}/usr/include/c++ \
-                -I${STAGING_DIR_HOST}${SDKPATHNATIVE}/usr/include/c++/${TARGET_SYS} \
-                -L${STAGING_DIR_HOST}${SDKPATHNATIVE}/lib \
-                -L${STAGING_DIR_HOST}${SDKPATHNATIVE}/usr/lib"
+                -I${STAGING_DIR_HOST}${SDKPATHNATIVE}/usr/lib/dbus-1.0/include"
 
 # yank default -e, otherwise we get the following error:
 # moc_qbuffer.cpp: No such file or directory

index 91c3c9e..113088e 100755
@@ -354,6 +354,12 @@ if [ -z "$FSTYPE" ]; then
         usage
     fi
 fi
+
+if [ "$FSTYPE" = "nfs" -a "$MACHINE" = "qemuppc" ]; then
+    echo "Error: usermode NFS boot is not available for qemuppc."
+    exit 1
+fi
+
 # FSTYPE is now set for all cases
 
 # Handle cases where a ROOTFS type is given instead of a filename, e.g.

index 16daddf..2bee543 100644
@@ -14,8 +14,8 @@ KBRANCH_qemuppc = "yocto/standard/preempt-rt/qemu-ppc32"
 LINUX_VERSION ?= "3.0.3"
 LINUX_KERNEL_TYPE = "preempt-rt"
 
-SRCREV_machine ?= "67ce0924042a2faa12b71ac3e92175c789c32af6"
-SRCREV_machine_qemuppc ?= "839638f4efda0c70c6f491161ab2c042f5bc3e66"
+SRCREV_machine ?= "c86423d29c94525d18ef1c9b6c025f733c1e8252"
+SRCREV_machine_qemuppc ?= "ccb47c9e8d85dc00ccd28bc6819d7769e2c11cb3"
 SRCREV_meta ?= "5b535279e61197cb194bb2dfceb8b7a04128387c"
 
 PR = "r0"

index 52aea97..229679c 100644
@@ -75,10 +75,15 @@ EXTRA_OEMAKE = ""
 
 KERNEL_ALT_IMAGETYPE ??= ""
 
+KERNEL_IMAGETYPE_FOR_MAKE = "${@(lambda s: s[:-3] if s[-3:] == ".gz" else s)(bb.data.getVar('KERNEL_IMAGETYPE', d, 1))}"
+
 kernel_do_compile() {
 	unset CFLAGS CPPFLAGS CXXFLAGS LDFLAGS MACHINE
 	oe_runmake include/linux/version.h CC="${KERNEL_CC}" LD="${KERNEL_LD}"
-	oe_runmake ${KERNEL_IMAGETYPE} ${KERNEL_ALT_IMAGETYPE} CC="${KERNEL_CC}" LD="${KERNEL_LD}"
+	oe_runmake ${KERNEL_IMAGETYPE_FOR_MAKE} ${KERNEL_ALT_IMAGETYPE} CC="${KERNEL_CC}" LD="${KERNEL_LD}"
+	if test "${KERNEL_IMAGETYPE_FOR_MAKE}.gz" = "${KERNEL_IMAGETYPE}"; then
+		gzip -9c < "${KERNEL_IMAGETYPE_FOR_MAKE}" > "${KERNEL_OUTPUT}"
+	fi
 }
 
 do_compile_kernelmodules() {

new file mode 100644
index 0000000..f2150ca
@@ -0,0 +1,19 @@
+LICENSE = "MIT"
+PR="r1"
+
+LIC_FILES_CHKSUM = "file://${COREBASE}/LICENSE;md5=3f40d7994397109285ec7b81fdeb3b58 \
+                    file://${COREBASE}/meta/COPYING.MIT;md5=3da9cfbcb788c80a0384361b4de20420"
+
+DEPENDS += "task-qt4e"
+
+RDEPENDS_${PN} += " \
+	task-qt4e-base \
+	"
+
+IMAGE_INSTALL += "\
+	module-init-tools \
+	task-qt4e-base \
+"
+
+inherit core-image
+

56 lines not on this page · raw message

index b3ff047..a68be07 100644
@@ -262,7 +262,7 @@ FILES_${PN} = "${bindir}/* ${sbindir}/* ${libexecdir}/* ${libdir}/lib*${SOLIBS}
             ${sysconfdir} ${sharedstatedir} ${localstatedir} \
             ${base_bindir}/* ${base_sbindir}/* \
             ${base_libdir}/*${SOLIBS} \
-            ${datadir}/${PN} ${libdir}/${PN}/* \
+            ${datadir}/${BPN} ${libdir}/${BPN}/* \
             ${datadir}/pixmaps ${datadir}/applications \
             ${datadir}/idl ${datadir}/omf ${datadir}/sounds \
             ${libdir}/bonobo/servers"

@@ -283,7 +283,7 @@ SECTION_${PN}-staticdev = "devel"
 RDEPENDS_${PN}-staticdev = "${PN}-dev (= ${EXTENDPKGV})"
 
 DOTDEBUG-dbg = "${bindir}/.debug ${sbindir}/.debug ${libexecdir}/.debug ${libdir}/.debug \
-            ${base_bindir}/.debug ${base_sbindir}/.debug ${base_libdir}/.debug ${libdir}/${PN}/.debug \
+            ${base_bindir}/.debug ${base_sbindir}/.debug ${base_libdir}/.debug ${libdir}/${BPN}/.debug \
             ${libdir}/matchbox-panel/.debug /usr/src/debug"
 
 DEBUGFILEDIRECTORY-dbg = "/usr/lib/debug /usr/src/debug"

index 571b7be..46c24e1 100644
@@ -63,20 +63,18 @@ python __anonymous () {
             newvar.append(extend_name(v))
         d.setVar(varname, " ".join(newvar))
 
-    pkgs = []
-    pkgrename = {}
+    pkgs_mapping = []
     for pkg in (d.getVar("PACKAGES", True) or "").split():
         if pkg.startswith(variant):
-            pkgs.append(pkg)
+            pkgs_mapping.append([pkg.split(variant + "-")[1], pkg])
             continue
-        pkgrename[pkg] = extend_name(pkg)
-        pkgs.append(pkgrename[pkg])
+        pkgs_mapping.append([pkg, extend_name(pkg)])
 
-    if pkgrename:
-        d.setVar("PACKAGES", " ".join(pkgs))
-        for pkg in pkgrename:
-            for subs in ["FILES", "RDEPENDS", "RRECOMMENDS", "SUMMARY", "DESCRIPTION", "RSUGGESTS", "RPROVIDES", "RCONFLICTS", "PKG", "ALLOW_EMPTY"]:
-                d.renameVar("%s_%s" % (subs, pkg), "%s_%s" % (subs, pkgrename[pkg]))
+    d.setVar("PACKAGES", " ".join([row[1] for row in pkgs_mapping]))
+
+    for pkg_mapping in pkgs_mapping:
+        for subs in ["FILES", "RDEPENDS", "RRECOMMENDS", "SUMMARY", "DESCRIPTION", "RSUGGESTS", "RPROVIDES", "RCONFLICTS", "PKG", "ALLOW_EMPTY"]:
+            d.renameVar("%s_%s" % (subs, pkg_mapping[0]), "%s_%s" % (subs, pkg_mapping[1]))
 
     map_dependencies("DEPENDS", d)
     for pkg in (d.getVar("PACKAGES", True).split() + [""]):

index a155b41..137512d 100644
@@ -30,11 +30,11 @@ do_install () {
 	install -o root -g root -p -m 644 passwd.master ${D}${datadir}/base-passwd/
 	install -o root -g root -p -m 644 group.master ${D}${datadir}/base-passwd/
 
-	install -d -m 755 ${D}${docdir}/${PN}
-	install -p -m 644 debian/changelog ${D}${docdir}/${PN}/
-	gzip -9 ${D}${docdir}/${PN}/*
-	install -p -m 644 README ${D}${docdir}/${PN}/
-	install -p -m 644 debian/copyright ${D}${docdir}/${PN}/
+	install -d -m 755 ${D}${docdir}/${BPN}
+	install -p -m 644 debian/changelog ${D}${docdir}/${BPN}/
+	gzip -9 ${D}${docdir}/${BPN}/*
+	install -p -m 644 README ${D}${docdir}/${BPN}/
+	install -p -m 644 debian/copyright ${D}${docdir}/${BPN}/
 }
 
 pkg_postinst_${PN} () {

index 5976d5d..286b806 100644
@@ -73,7 +73,7 @@ python __anonymous () {
     d.setVar("PACKAGES", " ".join([row[1] for row in pkgs_mapping]))
 
     for pkg_mapping in pkgs_mapping:
-        for subs in ["FILES", "RDEPENDS", "RRECOMMENDS", "SUMMARY", "DESCRIPTION", "RSUGGESTS", "RPROVIDES", "RCONFLICTS", "PKG", "ALLOW_EMPTY", "pkg_postinst", "pkg_postrm"]:
+        for subs in ["FILES", "RDEPENDS", "RRECOMMENDS", "SUMMARY", "DESCRIPTION", "RSUGGESTS", "RPROVIDES", "RCONFLICTS", "PKG", "ALLOW_EMPTY", "pkg_postinst", "pkg_postrm", "INITSCRIPT_NAME", "INITSCRIPT_PARAMS"]:
             d.renameVar("%s_%s" % (subs, pkg_mapping[0]), "%s_%s" % (subs, pkg_mapping[1]))
 
     map_dependencies("DEPENDS", d)

@@ -89,4 +89,5 @@ python __anonymous () {
     map_variable("PROVIDES", d)
     map_variable("PACKAGES_DYNAMIC", d)
     map_variable("PACKAGE_INSTALL", d)
+    map_variable("INITSCRIPT_PACKAGES", d)
 }

index 46c24e1..5976d5d 100644
@@ -73,7 +73,7 @@ python __anonymous () {
     d.setVar("PACKAGES", " ".join([row[1] for row in pkgs_mapping]))
 
     for pkg_mapping in pkgs_mapping:
-        for subs in ["FILES", "RDEPENDS", "RRECOMMENDS", "SUMMARY", "DESCRIPTION", "RSUGGESTS", "RPROVIDES", "RCONFLICTS", "PKG", "ALLOW_EMPTY"]:
+        for subs in ["FILES", "RDEPENDS", "RRECOMMENDS", "SUMMARY", "DESCRIPTION", "RSUGGESTS", "RPROVIDES", "RCONFLICTS", "PKG", "ALLOW_EMPTY", "pkg_postinst", "pkg_postrm"]:
             d.renameVar("%s_%s" % (subs, pkg_mapping[0]), "%s_%s" % (subs, pkg_mapping[1]))
 
     map_dependencies("DEPENDS", d)

index 5a8a5ae..a8e99e2 100644
@@ -6,14 +6,15 @@ been done in the context of the GTK+ widget toolkit. Pango forms the \
 core of text and font handling for GTK+-2.x."
 HOMEPAGE = "http://www.pango.org/"
 BUGTRACKER = "http://bugzilla.gnome.org"
-SECTION = "x11/libs"
+SECTION = "libs"
 LICENSE = "LGPL"
 
-DEPENDS = "glib-2.0 fontconfig freetype zlib virtual/libiconv virtual/libx11 libxft gtk-doc-native cairo"
+X11DEPENDS = "virtual/libx11 libxft"
+DEPENDS = "glib-2.0 fontconfig freetype zlib virtual/libiconv gtk-doc-native cairo ${@base_contains('DISTRO_FEATURES', 'x11', '${X11DEPENDS}', '', d)}"
 
 PACKAGES_DYNAMIC = "pango-module-*"
 
-RRECOMMENDS_${PN} = "pango-module-basic-x pango-module-basic-fc" 
+RRECOMMENDS_${PN} = "${@base_contains('DISTRO_FEATURES', 'x11', 'pango-module-basic-x', '', d)} pango-module-basic-fc" 
 
 inherit gnome
 

@@ -24,7 +25,8 @@ FULL_OPTIMIZATION_arm = "-O2"
 
 EXTRA_OECONF = "--disable-glibtest \
 		--enable-explicit-deps=no \
-	        --disable-debug"
+	        --disable-debug \
+		${@base_contains('DISTRO_FEATURES', 'x11', '--with-x', '--without-x', d)}"
 
 LEAD_SONAME = "libpango-1.0*"
 LIBV = "1.6.0"

index 600f00b..68ab700 100644
@@ -2,7 +2,7 @@ require pango.inc
 
 LIC_FILES_CHKSUM = "file://COPYING;md5=3bf50002aefd002f49e7bb854063f7e7"
 
-PR = "r0"
+PR = "r1"
 
 SRC_URI += "file://no-tests.patch"
 

index 3664df6..f0f0fcf 100644
@@ -54,3 +54,20 @@ Index: opkg-utils/opkg-make-index
  if packages_filename:
       sys.stdout.close()
       sys.stdout = old_stdout
+@@ -197,7 +197,15 @@
+ names = packages.packages.keys()
+ names.sort()
+ for name in names:
+-     for fn in packages[name].get_file_list():
++     try:
++          fnlist = packages[name].get_file_list()
++     except OSError, e:
++          sys.stderr.write("Package %s disappeared on us!\n" % (name))
++          continue
++     except IOError, e:
++          sys.stderr.write("Package %s disappeared on us!\n" % (name))
++          continue
++     for fn in fnlist:
+           (h,t) = os.path.split(fn)
+           if not t: continue
+           if not files.has_key(t): files[t] = name+':'+fn

index fd2b5e6..e04b74a 100644
@@ -8,7 +8,7 @@ RDEPENDS_${PN} = "python"
 RDEPENDS_${PN}_virtclass-native = ""
 SRCREV = "4747"
 PV = "0.1.8+svnr${SRCPV}"
-PR = "r4"
+PR = "r5"
 
 SRC_URI = "svn://svn.openmoko.org/trunk/src/host/;module=opkg-utils;proto=http \
            file://index-ignore-filenotfound.patch \

index 5308bb9..adda5e9 100644
@@ -100,10 +100,10 @@ do_install_locale () {
 	if [ "${base_libdir}" != "${libdir}" ]; then
 		cp -fpPR ${D}${base_libdir}/* ${dest}${base_libdir}
 	fi
-	if [ -f ${D}${bindir}/localedef ]; then
+	if [ -e ${D}${bindir}/localedef ]; then
 		mv -f ${D}${bindir}/localedef ${dest}${bindir}
 	fi
-	if [ -f ${D}${libdir}/gconv ]; then
+	if [ -e ${D}${libdir}/gconv ]; then
 		mv -f ${D}${libdir}/gconv ${dest}${libdir}
 	fi
 	cp -fpPR ${D}${libdir}/* ${dest}${libdir}

index 1a69bdc..a71c4d4 100644
@@ -1,7 +1,7 @@
 require eglibc.inc
 
 DEPENDS += "gperf-native"
-PR = "r22"
+PR = "r23"
 
 SRCREV = "14158"
 

index f382448..3b19e7b 100644
@@ -3,7 +3,7 @@ require eglibc.inc
 SRCREV = "14157"
 
 DEPENDS += "gperf-native"
-PR = "r13"
+PR = "r14"
 PR_append = "+svnr${SRCPV}"
 
 EGLIBC_BRANCH="eglibc-2_13"

index 229679c..bc1baa0 100644
@@ -471,9 +471,9 @@ python populate_packages_prepend () {
 # with a fixed length or there is a limit in transferring the kernel to memory
 do_sizecheck() {
 	if [ ! -z "${KERNEL_IMAGE_MAXSIZE}" ]; then
-        	size=`ls -l arch/${ARCH}/boot/${KERNEL_IMAGETYPE} | awk '{ print $5}'`
+		size=`ls -l ${KERNEL_OUTPUT} | awk '{ print $5}'`
         	if [ $size -ge ${KERNEL_IMAGE_MAXSIZE} ]; then
-                	rm arch/${ARCH}/boot/${KERNEL_IMAGETYPE}
+			rm ${KERNEL_OUTPUT}
                 	die  "This kernel (size=$size > ${KERNEL_IMAGE_MAXSIZE}) is too big for your device. Please reduce the size of the kernel by making more of it modular."
         	fi
     	fi

@@ -487,7 +487,7 @@ KERNEL_IMAGE_BASE_NAME[vardepsexclude] = "DATETIME"
 KERNEL_IMAGE_SYMLINK_NAME ?= "${KERNEL_IMAGETYPE}-${MACHINE}"
 
 kernel_do_deploy() {
-	install -m 0644 arch/${ARCH}/boot/${KERNEL_IMAGETYPE} ${DEPLOYDIR}/${KERNEL_IMAGE_BASE_NAME}.bin
+	install -m 0644 ${KERNEL_OUTPUT} ${DEPLOYDIR}/${KERNEL_IMAGE_BASE_NAME}.bin
 	if (grep -q -i -e '^CONFIG_MODULES=y$' .config); then
 		tar -cvzf ${DEPLOYDIR}/modules-${KERNEL_VERSION}-${PR}-${MACHINE}.tgz -C ${D} lib
 	fi