Skip to contentSkip to conversation

Fix typos in local.conf.sample and local.conf.sample.extended

PATCH In review Robert Yang 2 participants 3 messages Oct 11, 2011

lore
Share & tools
lore
#0 lore raw

cover Fix typos in local.conf.sample and local.conf.sample.extended

The following changes since commit 0c05d53fbede6feed6e9d361cb631a364f045a0f:

Fix sysprof for powerpc64 (2011-10-10 10:00:10 +0100)

are available in the git repository at:
git://git.pokylinux.org/poky-contrib robert/typo
http://git.pokylinux.org/cgit.cgi/poky-contrib/log/?h=robert/typo

Robert Yang (1):
Fix typos in local.conf.sample and local.conf.sample.extended

 meta-yocto/conf/local.conf.sample          |   10 +++++-----
 meta-yocto/conf/local.conf.sample.extended |    4 ++--
 2 files changed, 7 insertions(+), 7 deletions(-)
#1 lore raw

PATCH 1/1 Fix typos in local.conf.sample and local.conf.sample.extended

Fixes bug [YOCTO #1667]

Fix typos in local.conf.sample and local.conf.sample.extended:

differernt -> different
chages -> changes
complation -> compilation
egde -> edge
"an an" -> "as an"
images's -> image's

---
 meta-yocto/conf/local.conf.sample          |   10 +++++-----
 meta-yocto/conf/local.conf.sample.extended |    4 ++--
 2 files changed, 7 insertions(+), 7 deletions(-)
meta-yocto/conf/local.conf.sample +5 -5
index 0c24208..da3f8df 100644
@@ -53,7 +53,7 @@ MACHINE ??= "qemux86"
 #
 # Where to place downloads
 #
-# During a first build the system will download many differernt source code tarballs
+# During a first build the system will download many different source code tarballs
 # from various upstream projects. This can take a while, particularly if your network
 # connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you
 # can preserve this directory to speed up this part of subsequent builds. This directory
@@ -71,7 +71,7 @@ MACHINE ??= "qemux86"
 # and this option determines where those files are placed.
 #
 # You can wipe out TMPDIR leaving this directory intact and the build would regenerate
-# from these files if no chages were made to the configuration. If changes were made
+# from these files if no changes were made to the configuration. If changes were made
 # to the configuration, only shared state files where the state was still valid would
 # be used (done using checksums).
 #
@@ -84,7 +84,7 @@ MACHINE ??= "qemux86"
 #
 # This option specifies where the bulk of the building work should be done and
 # where BitBake should place its temporary files and output. Keep in mind that
-# this includes the extraction and complation of many applications and the toolchain
+# this includes the extraction and compilation of many applications and the toolchain
 # which can use Gigabytes of hard disk space.
 #
 # The default is a tmp directory under TOPDIR.
@@ -100,9 +100,9 @@ MACHINE ??= "qemux86"
 # these defaults.
 #
 DISTRO ?= "poky"
-# As an exable of a subclass there is a "bleeding" egde policy configuration 
+# As an example of a subclass there is a "bleeding" edge policy configuration
 # where many versions are set to the absolute latest code from the upstream 
-# source control systems. This is just mentioned here an an example, its not
+# source control systems. This is just mentioned here as an example, its not
 # useful to most new users.
 # DISTRO ?= "poky-bleeding"
 
meta-yocto/conf/local.conf.sample.extended +2 -2
index a42774c..9b50aba 100644
@@ -2,7 +2,7 @@
 # certain recipes.
 #BBMASK = ""
 
-# eglibc configurability is used to reduce minimal images's size.
+# eglibc configurability is used to reduce minimal image's size.
 # the all supported eglibc options are listed in DISTRO_FEATURES_LIBC
 # and disabled by default. Uncomment and copy the DISTRO_FEATURES_LIBC
 # and DISTRO_FEATURES definitions to local.conf to enable the options.
@@ -78,7 +78,7 @@
 # The default is "default"
 # Use "external-MODE" to use the precompiled external toolchains where MODE
 # is the type of external toolchain to use e.g. eabi. You need to ensure 
-# the toolchain you want to use is included in an an appropriate layer
+# the toolchain you want to use is included in an as appropriate layer
 # TCMODE = "external-eabi"
 
 # mklibs library size optimization is more useful to smaller images,
Signature · 1 line
1.7.1
#2 lore raw
Quoted 11 lines · Robert Yang

Fixes bug [YOCTO #1667]

Fix typos in local.conf.sample and local.conf.sample.extended:

differernt -> different
chages -> changes
complation -> compilation
egde -> edge
"an an" -> "as an"
images's -> image's

Quoted 5 lines
---
 meta-yocto/conf/local.conf.sample          |   10 +++++-----
 meta-yocto/conf/local.conf.sample.extended |    4 ++--
 2 files changed, 7 insertions(+), 7 deletions(-)

This is a patch against poky, not oe-core. I've merged it into poky with some tweaks and also ported the appropriate fixes to OE-Core's version of local.conf.sample.

Cheers,

Richard