meta-intel: machine config cleanup, v2
cover meta-intel: machine config cleanup, v2
From: Tom Zanussi <[email protected]>
This patchset cleans up the BSPs in meta-intel by having them use the new ia32-base.inc file containing common BSP settings.
The following BSPs were build- and boot-tested: sugarbay, crownbay, crownbay-noemgd, emenlow, and n450. These represent all the main variations and all were verified to work the same before as after. This includes the n450, which wasn't able to start X either before or after.
The other BSPs are the same or similar to those tested, so shouldn't see any changes either, but will have to be tested later.
v2: Add common metadata to intel layer and add a layer dependency section to BSP READMEs.
The following changes since commit 2a41ae377613b1f14829179f437aa76bbb1bc39e:
Tom Zanussi (1):
meta-intel: update kernel SRCREVs
are available in the git repository at:
git://git.yoctoproject.org/meta-intel.git tzanussi/conf-cleanup-v2
http://git.yoctoproject.org/cgit/cgit.cgi/meta-intel/log/?h=tzanussi/conf-cleanup-v2
Tom Zanussi (17):
meta-intel: remove virtual/xserver-xf86 references
meta-intel: make meta-intel itself a layer
ia32-base.inc: new include file
Have sugarbay.conf use the common ia32-base .inc file and remove the
open-coded machine settings.
Have fishriver.conf use the common ia32-base .inc file and remove the
open-coded machine settings.
Have crownbay.conf use the common ia32-base .inc file and remove the
open-coded machine settings.
Have crownbay-noemgd.conf use the common ia32-base .inc file and
remove the open-coded machine settings.
Have fri2.conf use the common ia32-base .inc file and remove the
open-coded machine settings.
Have fri2-noemgd.conf use the common ia32-base .inc file and
remove the open-coded machine settings.
Have jasperforest.conf use the common ia32-base .inc file and
remove the open-coded machine settings.
Have n450.conf use the common ia32-base .inc file and remove the
open-coded machine settings.
Have romley.conf use the common ia32-base .inc file and remove the
open-coded machine settings.
Have emenlow.conf use the common ia32-base .inc file and remove the
open-coded machine settings.
meta-intel: update READMEs with new layer info
meta-crownbay: remove common from BBFILES
meta-fri2: remove common from BBFILES
meta-intel: update READMEs with layer dependency list
conf/layer.conf | 10 ++++ conf/machine/include/ia32-base.inc | 58 ++++++++++++++++++++++ meta-crownbay/README | 22 ++++++++- meta-crownbay/conf/layer.conf | 4 +- meta-crownbay/conf/machine/crownbay-noemgd.conf | 43 ++-------------- meta-crownbay/conf/machine/crownbay.conf | 43 ++-------------- meta-emenlow/README | 21 ++++++++- meta-emenlow/conf/machine/emenlow.conf | 22 +-------- meta-fishriver/README | 21 ++++++++- meta-fishriver/conf/machine/fishriver.conf | 42 ++-------------- meta-fri2/README | 22 ++++++++- meta-fri2/conf/layer.conf | 4 +- meta-fri2/conf/machine/fri2-noemgd.conf | 43 ++-------------- meta-fri2/conf/machine/fri2.conf | 43 +++------------- meta-jasperforest/README | 25 ++++++++- meta-jasperforest/conf/machine/jasperforest.conf | 42 ++-------------- meta-n450/ReleaseNotes | 4 ++ meta-n450/conf/machine/n450.conf | 40 ++------------- meta-romley/README | 22 ++++++++- meta-romley/conf/machine/romley.conf | 40 ++------------- meta-sugarbay/README | 22 ++++++++- meta-sugarbay/conf/machine/sugarbay.conf | 43 ++-------------- 22 files changed, 270 insertions(+), 366 deletions(-) create mode 100644 conf/layer.conf create mode 100644 conf/machine/include/ia32-base.inc
PATCH 1/17 meta-intel: remove virtual/xserver-xf86 references
From: Tom Zanussi <[email protected]>
These are now deprecated (in favor of just virtual/xserver), so remove them.
Signed-off-by Tom Zanussi <[email protected]>
--- meta-crownbay/conf/machine/crownbay-noemgd.conf | 1 - meta-crownbay/conf/machine/crownbay.conf | 1 - meta-emenlow/conf/machine/emenlow.conf | 1 - meta-fishriver/conf/machine/fishriver.conf | 1 - meta-fri2/conf/machine/fri2-noemgd.conf | 1 - meta-fri2/conf/machine/fri2.conf | 1 - meta-jasperforest/conf/machine/jasperforest.conf | 1 - meta-n450/conf/machine/n450.conf | 1 - meta-romley/conf/machine/romley.conf | 1 - meta-sugarbay/conf/machine/sugarbay.conf | 1 - 10 files changed, 0 insertions(+), 10 deletions(-)
meta-crownbay/conf/machine/crownbay-noemgd.conf +0 -1
@@ -18,7 +18,6 @@ PREFERRED_PROVIDER_linux-libc-headers ?= "linux-libc-headers-yocto" PREFERRED_PROVIDER_virtual/libx11 ?= "libx11-trim" PREFERRED_PROVIDER_virtual/libgl ?= "mesa-dri" PREFERRED_PROVIDER_virtual/xserver ?= "xserver-xorg" -PREFERRED_PROVIDER_virtual/xserver-xf86 ?= "xserver-xorg" XSERVER ?= "xserver-xorg \ xserver-xorg-extension-dri \ xserver-xorg-extension-dri2 \
meta-crownbay/conf/machine/crownbay.conf +0 -1
@@ -18,7 +18,6 @@ PREFERRED_PROVIDER_linux-libc-headers ?= "linux-libc-headers-yocto" PREFERRED_PROVIDER_virtual/libx11 ?= "libx11-trim" PREFERRED_PROVIDER_virtual/libgl ?= "mesa-dri" PREFERRED_PROVIDER_virtual/xserver ?= "xserver-xorg" -PREFERRED_PROVIDER_virtual/xserver-xf86 ?= "xserver-xorg" XSERVER ?= "xserver-xorg \ xserver-xorg-extension-dri \ xserver-xorg-extension-dri2 \
meta-emenlow/conf/machine/emenlow.conf +0 -1
@@ -20,7 +20,6 @@ PREFERRED_PROVIDER_drm = "libdrm-poulsbo" PREFERRED_PROVIDER_virtual/libx11 = "libx11-trim" PREFERRED_PROVIDER_virtual/libgl = "xpsb-glx" PREFERRED_PROVIDER_virtual/xserver = "xserver-psb" -PREFERRED_PROVIDER_virtual/xserver-xf86 = "xserver-psb" PREFERRED_PROVIDER_mesa-dri = "xpsb-glx" XSERVER ?= "xserver-psb \ xserver-psb-extension-dri \
meta-fishriver/conf/machine/fishriver.conf +0 -1
@@ -18,7 +18,6 @@ PREFERRED_PROVIDER_linux-libc-headers ?= "linux-libc-headers-yocto" PREFERRED_PROVIDER_virtual/libx11 ?= "libx11-trim" PREFERRED_PROVIDER_virtual/libgl ?= "mesa-dri" PREFERRED_PROVIDER_virtual/xserver ?= "xserver-xorg" -PREFERRED_PROVIDER_virtual/xserver-xf86 ?= "xserver-xorg" XSERVER ?= "xserver-xorg \ xserver-xorg-extension-dri \ xserver-xorg-extension-dri2 \
meta-fri2/conf/machine/fri2-noemgd.conf +0 -1
@@ -18,7 +18,6 @@ PREFERRED_PROVIDER_linux-libc-headers ?= "linux-libc-headers-yocto" PREFERRED_PROVIDER_virtual/libx11 ?= "libx11-trim" PREFERRED_PROVIDER_virtual/libgl ?= "mesa-dri" PREFERRED_PROVIDER_virtual/xserver ?= "xserver-xorg" -PREFERRED_PROVIDER_virtual/xserver-xf86 ?= "xserver-xorg" XSERVER ?= "xserver-xorg \ xserver-xorg-extension-dri \ xserver-xorg-extension-dri2 \
meta-fri2/conf/machine/fri2.conf +0 -1
@@ -18,7 +18,6 @@ PREFERRED_PROVIDER_linux-libc-headers ?= "linux-libc-headers-yocto" PREFERRED_PROVIDER_virtual/libx11 ?= "libx11-trim" PREFERRED_PROVIDER_virtual/libgl ?= "mesa-dri" PREFERRED_PROVIDER_virtual/xserver ?= "xserver-xorg" -PREFERRED_PROVIDER_virtual/xserver-xf86 ?= "xserver-xorg" XSERVER ?= "xserver-xorg \ xserver-xorg-extension-dri \ xserver-xorg-extension-dri2 \
meta-jasperforest/conf/machine/jasperforest.conf +0 -1
@@ -18,7 +18,6 @@ PREFERRED_PROVIDER_linux-libc-headers ?= "linux-libc-headers-yocto" PREFERRED_PROVIDER_virtual/libx11 ?= "libx11-trim" PREFERRED_PROVIDER_virtual/libgl ?= "mesa-dri" PREFERRED_PROVIDER_virtual/xserver ?= "xserver-xorg" -PREFERRED_PROVIDER_virtual/xserver-xf86 ?= "xserver-xorg" XSERVER ?= "xserver-xorg \ xserver-xorg-extension-dri \ xserver-xorg-extension-dri2 \
meta-n450/conf/machine/n450.conf +0 -1
@@ -16,7 +16,6 @@ PREFERRED_PROVIDER_linux-libc-headers ?= "linux-libc-headers-yocto" PREFERRED_PROVIDER_virtual/libx11 ?= "libx11-trim" PREFERRED_PROVIDER_virtual/libgl ?= "mesa-dri" PREFERRED_PROVIDER_virtual/xserver ?= "xserver-xorg" -PREFERRED_PROVIDER_virtual/xserver-xf86 ?= "xserver-xorg" XSERVER ?= "xserver-xorg \ xserver-xorg-extension-dri \ xserver-xorg-extension-dri2 \
meta-romley/conf/machine/romley.conf +0 -1
@@ -18,7 +18,6 @@ PREFERRED_PROVIDER_linux-libc-headers ?= "linux-libc-headers-yocto" PREFERRED_PROVIDER_virtual/libx11 ?= "libx11-trim" PREFERRED_PROVIDER_virtual/libgl ?= "mesa-dri" PREFERRED_PROVIDER_virtual/xserver ?= "xserver-xorg" -PREFERRED_PROVIDER_virtual/xserver-xf86 ?= "xserver-xorg" XSERVER ?= "xserver-xorg \ xserver-xorg-extension-dri \ xserver-xorg-extension-dri2 \
meta-sugarbay/conf/machine/sugarbay.conf +0 -1
@@ -18,7 +18,6 @@ PREFERRED_PROVIDER_linux-libc-headers ?= "linux-libc-headers-yocto" PREFERRED_PROVIDER_virtual/libx11 ?= "libx11-trim" PREFERRED_PROVIDER_virtual/libgl ?= "mesa-dri" PREFERRED_PROVIDER_virtual/xserver ?= "xserver-xorg" -PREFERRED_PROVIDER_virtual/xserver-xf86 ?= "xserver-xorg" XSERVER ?= "xserver-xorg \ xserver-xorg-extension-dri \ xserver-xorg-extension-dri2 \
Signature · 1 line
1.7.0.4
PATCH 2/17 meta-intel: make meta-intel itself a layer
From: Tom Zanussi <[email protected]>
meta-intel contains a set of BSP layers, but is not itself a layer. Make it a layer to make it easy to share common intel-specific files between BSPs.
Signed-off-by Tom Zanussi <[email protected]>
--- conf/layer.conf | 10 ++++++++++ 1 files changed, 10 insertions(+), 0 deletions(-) create mode 100644 conf/layer.conf
conf/layer.conf new file +10 -0
@@ -0,0 +1,10 @@ +# We have a conf and classes directory, add to BBPATH +BBPATH := "${BBPATH}:${LAYERDIR}" + +# We have a packages directory, add to BBFILES +BBFILES := "${BBFILES} ${LAYERDIR}/common/recipes-*/*/*.bb \ + ${LAYERDIR}/common/recipes-*/*/*.bbappend" + +BBFILE_COLLECTIONS += "intel" +BBFILE_PATTERN_intel := "^${LAYERDIR}/" +BBFILE_PRIORITY_intel = "5"
Signature · 1 line
1.7.0.4
PATCH 3/17 ia32-base.inc: new include file
In reply to [email protected]From: Tom Zanussi <[email protected]>
The meta-intel BSPs currently have a number of machine settings common to all - factor these out into a common include file.
Also add several new intel-specific XSERVER variables for building XSERVER variables in BSPs.
Signed-off-by Tom Zanussi <[email protected]>
--- conf/machine/include/ia32-base.inc | 58 ++++++++++++++++++++++++++++++++++++ 1 files changed, 58 insertions(+), 0 deletions(-) create mode 100644 conf/machine/include/ia32-base.inc
conf/machine/include/ia32-base.inc new file +58 -0
@@ -0,0 +1,58 @@ +# +# base machine settings for ia32-architecture BSPs +# + +# +# common settings for Intel-based machines +# +MACHINE_FEATURES += "kernel26 screen keyboard pci usbhost ext2 ext3 x86 \ + acpi serial usbgadget" + +MACHINE_EXTRA_RRECOMMENDS += "kernel-modules eee-acpi-scripts" +MACHINE_ESSENTIAL_EXTRA_RDEPENDS += "grub" + +IMAGE_FSTYPES += "ext3 cpio.gz live" + +KERNEL_IMAGETYPE ?= "bzImage" + +SERIAL_CONSOLE ?= "115200 ttyS0" + +# +# glibc-related variables +# +GLIBC_ADDONS ?= "nptl" +GLIBC_EXTRA_OECONF += "--with-tls" + +# +# kernel-related variables +# +PREFERRED_PROVIDER_virtual/kernel ?= "linux-yocto" +PREFERRED_VERSION_linux-yocto ?= "3.0%" +PREFERRED_PROVIDER_linux-libc-headers ?= "linux-libc-headers-yocto" + +# +# XSERVER subcomponents, used to build the XSERVER variable +# +XSERVER_IA32_BASE = "xserver-xorg \ + xf86-input-mouse \ + xf86-input-keyboard \ + xf86-input-evdev \ + xf86-input-synaptics \ + mesa-dri \ + " + +XSERVER_IA32_EXT = "xserver-xorg-extension-dri \ + xserver-xorg-extension-dri2 \ + xserver-xorg-extension-glx \ + xserver-xorg-extension-extmod \ + xserver-xorg-extension-dbe \ + xserver-xorg-module-libint10 \ + " + +XSERVER_IA32_I915 = "xf86-video-intel \ + mesa-dri-driver-i965 \ + " + +XSERVER_IA32_EMGD = "emgd-driver-bin" + +XSERVER_IA32_VESA = "xf86-video-vesa"
Signature · 1 line
1.7.0.4
PATCH 4/17 Have sugarbay.conf use the common ia32-base .inc file and remove the open-coded machine settings.
In reply to [email protected]From: Tom Zanussi <[email protected]>
Signed-off-by Tom Zanussi <[email protected]>
--- meta-sugarbay/conf/machine/sugarbay.conf | 42 +++-------------------------- 1 files changed, 5 insertions(+), 37 deletions(-)
meta-sugarbay/conf/machine/sugarbay.conf +5 -37
@@ -5,41 +5,9 @@ # i.e. Sandy Bridge + Cougar Point require conf/machine/include/tune-x86_64.inc +require conf/machine/include/ia32-base.inc -MACHINE_FEATURES = "kernel26 screen keyboard pci usbhost ext2 ext3 x86 \ - acpi serial usbgadget" - -KERNEL_IMAGETYPE = "bzImage" - -PREFERRED_PROVIDER_virtual/kernel ?= "linux-yocto" -PREFERRED_VERSION_linux-yocto = "3.0%" - -PREFERRED_PROVIDER_linux-libc-headers ?= "linux-libc-headers-yocto" -PREFERRED_PROVIDER_virtual/libx11 ?= "libx11-trim" -PREFERRED_PROVIDER_virtual/libgl ?= "mesa-dri" -PREFERRED_PROVIDER_virtual/xserver ?= "xserver-xorg" -XSERVER ?= "xserver-xorg \ - xserver-xorg-extension-dri \ - xserver-xorg-extension-dri2 \ - xserver-xorg-extension-glx \ - xserver-xorg-extension-extmod \ - xserver-xorg-extension-dbe \ - xserver-xorg-module-libint10 \ - xf86-input-mouse \ - xf86-input-keyboard \ - xf86-input-evdev \ - xf86-input-synaptics \ - xf86-video-intel \ - mesa-dri \ - mesa-dri-driver-i965" - -SERIAL_CONSOLE = "115200 ttyS0" - -MACHINE_EXTRA_RRECOMMENDS = "kernel-modules eee-acpi-scripts" - -IMAGE_FSTYPES ?= "ext3 cpio.gz live" - -GLIBC_ADDONS = "nptl" -GLIBC_EXTRA_OECONF = "--with-tls" - -MACHINE_ESSENTIAL_EXTRA_RDEPENDS = "grub" +XSERVER ?= "${XSERVER_IA32_BASE} \ + ${XSERVER_IA32_EXT} \ + ${XSERVER_IA32_I915} \ + "
Signature · 1 line
1.7.0.4
PATCH 5/17 Have fishriver.conf use the common ia32-base .inc file and remove the open-coded machine settings.
In reply to [email protected]From: Tom Zanussi <[email protected]>
Signed-off-by Tom Zanussi <[email protected]>
--- meta-fishriver/conf/machine/fishriver.conf | 41 +++------------------------ 1 files changed, 5 insertions(+), 36 deletions(-)
meta-fishriver/conf/machine/fishriver.conf +5 -36
@@ -5,42 +5,11 @@ # i.e. Z530/E660 + EG20T include conf/machine/include/tune-atom.inc +require conf/machine/include/ia32-base.inc -MACHINE_FEATURES = "kernel26 screen keyboard pci usbhost ext2 ext3 x86 \ - acpi serial usbgadget" - -KERNEL_IMAGETYPE = "bzImage" - -PREFERRED_PROVIDER_virtual/kernel ?= "linux-yocto" -PREFERRED_VERSION_linux-yocto ?= "3.0%" - -PREFERRED_PROVIDER_linux-libc-headers ?= "linux-libc-headers-yocto" -PREFERRED_PROVIDER_virtual/libx11 ?= "libx11-trim" -PREFERRED_PROVIDER_virtual/libgl ?= "mesa-dri" -PREFERRED_PROVIDER_virtual/xserver ?= "xserver-xorg" -XSERVER ?= "xserver-xorg \ - xserver-xorg-extension-dri \ - xserver-xorg-extension-dri2 \ - xserver-xorg-extension-glx \ - xserver-xorg-extension-extmod \ - xserver-xorg-extension-dbe \ - xserver-xorg-module-libint10 \ - xf86-input-mouse \ - xf86-input-keyboard \ - xf86-input-evdev \ - xf86-input-synaptics \ - xf86-video-vesa" - -SERIAL_CONSOLE = "115200 ttyS0" +XSERVER ?= "${XSERVER_IA32_BASE} \ + ${XSERVER_IA32_EXT} \ + ${XSERVER_IA32_VESA} \ + " APPEND += "video=vesafb vga=0x318" - -MACHINE_EXTRA_RRECOMMENDS = "kernel-modules eee-acpi-scripts" - -IMAGE_FSTYPES ?= "ext3 cpio.gz live" - -GLIBC_ADDONS = "nptl" -GLIBC_EXTRA_OECONF = "--with-tls" - -MACHINE_ESSENTIAL_EXTRA_RDEPENDS = "grub" -
Signature · 1 line
1.7.0.4
PATCH 6/17 Have crownbay.conf use the common ia32-base .inc file and remove the open-coded machine settings.
In reply to [email protected]From: Tom Zanussi <[email protected]>
Signed-off-by Tom Zanussi <[email protected]>
--- meta-crownbay/conf/machine/crownbay.conf | 42 ++++------------------------- 1 files changed, 6 insertions(+), 36 deletions(-)
meta-crownbay/conf/machine/crownbay.conf +6 -36
@@ -5,45 +5,15 @@ # i.e. E660 + EG20T include conf/machine/include/tune-atom.inc +include conf/machine/include/ia32-base.inc -MACHINE_FEATURES = "kernel26 screen keyboard pci usbhost ext2 ext3 x86 \ - acpi serial usbgadget" - -KERNEL_IMAGETYPE = "bzImage" - -PREFERRED_PROVIDER_virtual/kernel ?= "linux-yocto" -PREFERRED_VERSION_linux-yocto = "3.0%" - -PREFERRED_PROVIDER_linux-libc-headers ?= "linux-libc-headers-yocto" -PREFERRED_PROVIDER_virtual/libx11 ?= "libx11-trim" -PREFERRED_PROVIDER_virtual/libgl ?= "mesa-dri" -PREFERRED_PROVIDER_virtual/xserver ?= "xserver-xorg" -XSERVER ?= "xserver-xorg \ - xserver-xorg-extension-dri \ - xserver-xorg-extension-dri2 \ - xserver-xorg-extension-glx \ - xserver-xorg-extension-extmod \ - xserver-xorg-extension-dbe \ - xserver-xorg-module-libint10 \ - emgd-driver-bin \ - xf86-input-mouse \ - xf86-input-keyboard \ - xf86-input-evdev \ - xf86-input-synaptics \ - xf86-video-vesa" +XSERVER ?= "${XSERVER_IA32_BASE} \ + ${XSERVER_IA32_EXT} \ + ${XSERVER_IA32_EMGD} \ + " PREFERRED_VERSION_xserver-xorg ?= "1.9.3" +PREFERRED_VERSION_mesa-dri ?= "7.11" PREFERRED_VERSION_emgd-driver-bin ?= "1.8" -SERIAL_CONSOLE = "115200 ttyS0" - APPEND += "video=vesafb vga=0x318" - -MACHINE_EXTRA_RRECOMMENDS = "kernel-modules eee-acpi-scripts" - -IMAGE_FSTYPES ?= "ext3 cpio.gz live" - -GLIBC_ADDONS = "nptl" -GLIBC_EXTRA_OECONF = "--with-tls" - -MACHINE_ESSENTIAL_EXTRA_RDEPENDS = "grub"
Signature · 1 line
1.7.0.4
PATCH 7/17 Have crownbay-noemgd.conf use the common ia32-base .inc file and remove the open-coded machine settings.
In reply to [email protected]From: Tom Zanussi <[email protected]>
Signed-off-by Tom Zanussi <[email protected]>
--- meta-crownbay/conf/machine/crownbay-noemgd.conf | 42 +++-------------------- 1 files changed, 5 insertions(+), 37 deletions(-)
meta-crownbay/conf/machine/crownbay-noemgd.conf +5 -37
@@ -5,43 +5,11 @@ # i.e. E660 + EG20T include conf/machine/include/tune-atom.inc +include conf/machine/include/ia32-base.inc -MACHINE_FEATURES = "kernel26 screen keyboard pci usbhost ext2 ext3 x86 \ - acpi serial usbgadget" - -KERNEL_IMAGETYPE = "bzImage" - -PREFERRED_PROVIDER_virtual/kernel ?= "linux-yocto" -PREFERRED_VERSION_linux-yocto = "3.0%" - -PREFERRED_PROVIDER_linux-libc-headers ?= "linux-libc-headers-yocto" -PREFERRED_PROVIDER_virtual/libx11 ?= "libx11-trim" -PREFERRED_PROVIDER_virtual/libgl ?= "mesa-dri" -PREFERRED_PROVIDER_virtual/xserver ?= "xserver-xorg" -XSERVER ?= "xserver-xorg \ - xserver-xorg-extension-dri \ - xserver-xorg-extension-dri2 \ - xserver-xorg-extension-glx \ - xserver-xorg-extension-extmod \ - xserver-xorg-extension-dbe \ - xserver-xorg-module-libint10 \ - xf86-input-mouse \ - xf86-input-keyboard \ - xf86-input-evdev \ - xf86-input-synaptics \ - xf86-video-vesa" - -PREFERRED_VERSION_xserver-xorg ?= "1.11.1" - -SERIAL_CONSOLE = "115200 ttyS0" +XSERVER ?= "${XSERVER_IA32_BASE} \ + ${XSERVER_IA32_EXT} \ + ${XSERVER_IA32_VESA} \ + " APPEND += "video=vesafb vga=0x318" - -MACHINE_EXTRA_RRECOMMENDS = "kernel-modules eee-acpi-scripts" - -IMAGE_FSTYPES ?= "ext3 cpio.gz live" - -GLIBC_ADDONS = "nptl" -GLIBC_EXTRA_OECONF = "--with-tls" - -MACHINE_ESSENTIAL_EXTRA_RDEPENDS = "grub"
Signature · 1 line
1.7.0.4
PATCH 8/17 Have fri2.conf use the common ia32-base .inc file and remove the open-coded machine settings.
In reply to [email protected]From: Tom Zanussi <[email protected]>
Signed-off-by Tom Zanussi <[email protected]>
--- meta-fri2/conf/machine/fri2.conf | 42 ++++++------------------------------- 1 files changed, 7 insertions(+), 35 deletions(-)
meta-fri2/conf/machine/fri2.conf +7 -35
@@ -5,45 +5,17 @@ # i.e. E660 + EG20T include conf/machine/include/tune-atom.inc +include conf/machine/include/ia32-base.inc -MACHINE_FEATURES = "kernel26 screen keyboard pci usbhost ext2 ext3 x86 \ - acpi serial usbgadget wifi 3g" +MACHINE_FEATURES += "wifi 3g" -KERNEL_IMAGETYPE = "bzImage" - -PREFERRED_PROVIDER_virtual/kernel ?= "linux-yocto" -PREFERRED_VERSION_linux-yocto ?= "3.0%" - -PREFERRED_PROVIDER_linux-libc-headers ?= "linux-libc-headers-yocto" -PREFERRED_PROVIDER_virtual/libx11 ?= "libx11-trim" -PREFERRED_PROVIDER_virtual/libgl ?= "mesa-dri" -PREFERRED_PROVIDER_virtual/xserver ?= "xserver-xorg" -XSERVER ?= "xserver-xorg \ - xserver-xorg-extension-dri \ - xserver-xorg-extension-dri2 \ - xserver-xorg-extension-glx \ - xserver-xorg-extension-extmod \ - xserver-xorg-extension-dbe \ - xserver-xorg-module-libint10 \ - xf86-input-mouse \ - xf86-input-keyboard \ - xf86-input-evdev \ - xf86-input-synaptics \ - emgd-driver-bin" +XSERVER ?= "${XSERVER_IA32_BASE} \ + ${XSERVER_IA32_EXT} \ + ${XSERVER_IA32_EMGD} \ + " PREFERRED_VERSION_xserver-xorg ?= "1.9.3" +PREFERRED_VERSION_mesa-dri ?= "7.11" PREFERRED_VERSION_emgd-driver-bin ?= "1.8" -SERIAL_CONSOLE = "115200 ttyS0" - APPEND += "video=vesafb vga=0x318" - -MACHINE_EXTRA_RRECOMMENDS = "kernel-modules eee-acpi-scripts" - -IMAGE_FSTYPES ?= "ext3 cpio.gz live" - -GLIBC_ADDONS = "nptl" -GLIBC_EXTRA_OECONF = "--with-tls" - -MACHINE_ESSENTIAL_EXTRA_RDEPENDS = "grub" -
Signature · 1 line
1.7.0.4
PATCH 9/17 Have fri2-noemgd.conf use the common ia32-base .inc file and remove the open-coded machine settings.
In reply to [email protected]From: Tom Zanussi <[email protected]>
Signed-off-by Tom Zanussi <[email protected]>
--- meta-fri2/conf/machine/fri2-noemgd.conf | 42 ++++-------------------------- 1 files changed, 6 insertions(+), 36 deletions(-)
meta-fri2/conf/machine/fri2-noemgd.conf +6 -36
@@ -5,43 +5,13 @@ # i.e. E660 + EG20T include conf/machine/include/tune-atom.inc +include conf/machine/include/ia32-base.inc -MACHINE_FEATURES = "kernel26 screen keyboard pci usbhost ext2 ext3 x86 \ - acpi serial usbgadget wifi 3g" +MACHINE_FEATURES += "wifi 3g" -KERNEL_IMAGETYPE = "bzImage" - -PREFERRED_PROVIDER_virtual/kernel ?= "linux-yocto" -PREFERRED_VERSION_linux-yocto ?= "3.0%" - -PREFERRED_PROVIDER_linux-libc-headers ?= "linux-libc-headers-yocto" -PREFERRED_PROVIDER_virtual/libx11 ?= "libx11-trim" -PREFERRED_PROVIDER_virtual/libgl ?= "mesa-dri" -PREFERRED_PROVIDER_virtual/xserver ?= "xserver-xorg" -XSERVER ?= "xserver-xorg \ - xserver-xorg-extension-dri \ - xserver-xorg-extension-dri2 \ - xserver-xorg-extension-glx \ - xserver-xorg-extension-extmod \ - xserver-xorg-extension-dbe \ - xserver-xorg-module-libint10 \ - xf86-input-mouse \ - xf86-input-keyboard \ - xf86-input-evdev \ - xf86-input-synaptics \ - xf86-video-vesa" - -PREFERRED_VERSION_xserver-xorg ?= "1.11.1" - -SERIAL_CONSOLE = "115200 ttyS0" +XSERVER ?= "${XSERVER_IA32_BASE} \ + ${XSERVER_IA32_EXT} \ + ${XSERVER_IA32_VESA} \ + " APPEND += "video=vesafb vga=0x318" - -MACHINE_EXTRA_RRECOMMENDS = "kernel-modules eee-acpi-scripts" - -IMAGE_FSTYPES ?= "ext3 cpio.gz live" - -GLIBC_ADDONS = "nptl" -GLIBC_EXTRA_OECONF = "--with-tls" - -MACHINE_ESSENTIAL_EXTRA_RDEPENDS = "grub"
Signature · 1 line
1.7.0.4
PATCH 10/17 Have jasperforest.conf use the common ia32-base .inc file and remove the open-coded machine settings.
In reply to [email protected]From: Tom Zanussi <[email protected]>
Signed-off-by Tom Zanussi <[email protected]>
--- meta-jasperforest/conf/machine/jasperforest.conf | 41 +++------------------- 1 files changed, 5 insertions(+), 36 deletions(-)
meta-jasperforest/conf/machine/jasperforest.conf +5 -36
@@ -5,42 +5,11 @@ # systems i.e. Xeon C5500/C3500 + Intel 3420 chipset (Ibex Peak) require conf/machine/include/tune-x86_64.inc +require conf/machine/include/ia32-base.inc -MACHINE_FEATURES = "kernel26 screen keyboard pci usbhost ext2 ext3 x86 \ - acpi serial usbgadget" - -KERNEL_IMAGETYPE = "bzImage" - -PREFERRED_PROVIDER_virtual/kernel ?= "linux-yocto" -PREFERRED_VERSION_linux-yocto ?= "3.0%" - -PREFERRED_PROVIDER_linux-libc-headers ?= "linux-libc-headers-yocto" -PREFERRED_PROVIDER_virtual/libx11 ?= "libx11-trim" -PREFERRED_PROVIDER_virtual/libgl ?= "mesa-dri" -PREFERRED_PROVIDER_virtual/xserver ?= "xserver-xorg" -XSERVER ?= "xserver-xorg \ - xserver-xorg-extension-dri \ - xserver-xorg-extension-dri2 \ - xserver-xorg-extension-glx \ - xserver-xorg-extension-extmod \ - xserver-xorg-extension-dbe \ - xserver-xorg-module-libint10 \ - xf86-input-mouse \ - xf86-input-keyboard \ - xf86-input-evdev \ - xf86-input-synaptics \ - xf86-video-vesa" - -SERIAL_CONSOLE = "115200 ttyS0" +XSERVER ?= "${XSERVER_IA32_BASE} \ + ${XSERVER_IA32_EXT} \ + ${XSERVER_IA32_VESA} \ + " APPEND += "video=vesafb vga=0x318" - -MACHINE_EXTRA_RRECOMMENDS = "kernel-modules eee-acpi-scripts" - -IMAGE_FSTYPES ?= "ext3 cpio.gz live" - -GLIBC_ADDONS = "nptl" -GLIBC_EXTRA_OECONF = "--with-tls" - -MACHINE_ESSENTIAL_EXTRA_RDEPENDS = "grub" -
Signature · 1 line
1.7.0.4
PATCH 11/17 Have n450.conf use the common ia32-base .inc file and remove the open-coded machine settings.
In reply to [email protected]From: Tom Zanussi <[email protected]>
Signed-off-by Tom Zanussi <[email protected]>
--- meta-n450/conf/machine/n450.conf | 39 +++++-------------------------------- 1 files changed, 6 insertions(+), 33 deletions(-)
meta-n450/conf/machine/n450.conf +6 -33
@@ -4,44 +4,17 @@ #@DESCRIPTION: Machine configuration for Intel 1-N450 based systems include conf/machine/include/tune-atom.inc +include conf/machine/include/ia32-base.inc -MACHINE_FEATURES = "kernel26 screen keyboard pci usbhost ext2 ext3 x86 \ - acpi serial" - -KERNEL_IMAGETYPE = "bzImage" - -PREFERRED_PROVIDER_virtual/kernel ?= "linux-yocto" -PREFERRED_VERSION_linux-yocto = "3.0%" -PREFERRED_PROVIDER_linux-libc-headers ?= "linux-libc-headers-yocto" -PREFERRED_PROVIDER_virtual/libx11 ?= "libx11-trim" -PREFERRED_PROVIDER_virtual/libgl ?= "mesa-dri" -PREFERRED_PROVIDER_virtual/xserver ?= "xserver-xorg" -XSERVER ?= "xserver-xorg \ - xserver-xorg-extension-dri \ - xserver-xorg-extension-dri2 \ - xserver-xorg-extension-glx \ - xserver-xorg-extension-extmod \ - xserver-xorg-extension-dbe \ - xserver-xorg-module-libint10 \ - xf86-input-mouse \ - xf86-input-keyboard \ - xf86-input-evdev \ - xf86-input-synaptics \ - xf86-video-intel \ - mesa-dri-driver-i915" +XSERVER ?= "${XSERVER_IA32_BASE} \ + ${XSERVER_IA32_EXT} \ + ${XSERVER_IA32_I915} \ + " SYSLINUX_OPTS = "serial 0 115200" SERIAL_CONSOLE = "115200 ttyS0" APPEND += "console=ttyS0,115200 console=tty0" -MACHINE_EXTRA_RRECOMMENDS = "kernel-modules eee-acpi-scripts n450-audio" - -IMAGE_FSTYPES ?= "ext3 cpio.gz live" - -GLIBC_ADDONS = "nptl" -GLIBC_EXTRA_OECONF = "--with-tls" +MACHINE_EXTRA_RRECOMMENDS += "n450-audio" ROOTLESS_X = "1" - -MACHINE_ESSENTIAL_EXTRA_RDEPENDS = "grub" -
Signature · 1 line
1.7.0.4
PATCH 12/17 Have romley.conf use the common ia32-base .inc file and remove the open-coded machine settings.
In reply to [email protected]From: Tom Zanussi <[email protected]>
Signed-off-by Tom Zanussi <[email protected]>
--- meta-romley/conf/machine/romley.conf | 39 +++------------------------------ 1 files changed, 4 insertions(+), 35 deletions(-)
meta-romley/conf/machine/romley.conf +4 -35
@@ -5,41 +5,10 @@ # i.e. Sandy Bridge + Patsburg Chipset require conf/machine/include/tune-x86_64.inc +include conf/machine/include/ia32-base.inc -MACHINE_FEATURES = "kernel26 screen keyboard pci usbhost ext2 ext3 x86 \ - acpi serial usbgadget" - -KERNEL_IMAGETYPE = "bzImage" - -PREFERRED_PROVIDER_virtual/kernel ?= "linux-yocto" -PREFERRED_VERSION_linux-yocto = "3.0%" - -PREFERRED_PROVIDER_linux-libc-headers ?= "linux-libc-headers-yocto" -PREFERRED_PROVIDER_virtual/libx11 ?= "libx11-trim" -PREFERRED_PROVIDER_virtual/libgl ?= "mesa-dri" -PREFERRED_PROVIDER_virtual/xserver ?= "xserver-xorg" -XSERVER ?= "xserver-xorg \ - xserver-xorg-extension-dri \ - xserver-xorg-extension-dri2 \ - xserver-xorg-extension-glx \ - xserver-xorg-extension-extmod \ - xserver-xorg-extension-dbe \ - xserver-xorg-module-libint10 \ +XSERVER ?= "${XSERVER_IA32_BASE} \ + ${XSERVER_IA32_EXT} \ xserver-xorg-module-xaa \ - xf86-input-mouse \ - xf86-input-keyboard \ - xf86-input-evdev \ - xf86-input-synaptics \ xf86-video-mga \ - mesa-dri" - -SERIAL_CONSOLE = "115200 ttyS0" - -MACHINE_EXTRA_RRECOMMENDS = "kernel-modules eee-acpi-scripts" - -IMAGE_FSTYPES ?= "ext3 cpio.gz live" - -GLIBC_ADDONS = "nptl" -GLIBC_EXTRA_OECONF = "--with-tls" - -MACHINE_ESSENTIAL_EXTRA_RDEPENDS = "grub" + "
Signature · 1 line
1.7.0.4
PATCH 13/17 Have emenlow.conf use the common ia32-base .inc file and remove the open-coded machine settings.
In reply to [email protected]From: Tom Zanussi <[email protected]>
Signed-off-by Tom Zanussi <[email protected]>
--- meta-emenlow/conf/machine/emenlow.conf | 23 ++--------------------- 1 files changed, 2 insertions(+), 21 deletions(-)
meta-emenlow/conf/machine/emenlow.conf +2 -21
@@ -5,21 +5,14 @@ # Webs-2120 box. include conf/machine/include/tune-atom.inc +include conf/machine/include/ia32-base.inc -MACHINE_FEATURES = "kernel26 screen keyboard pci usbhost ext2 ext3 x86 \ - acpi serial usbgadget" - -KERNEL_IMAGETYPE = "bzImage" - -PREFERRED_PROVIDER_virtual/kernel ?= "linux-yocto" -PREFERRED_VERSION_linux-yocto ?= "3.0%" - -PREFERRED_PROVIDER_linux-libc-headers ?= "linux-libc-headers-yocto" PREFERRED_PROVIDER_libdrm = "libdrm-poulsbo" PREFERRED_PROVIDER_drm = "libdrm-poulsbo" PREFERRED_PROVIDER_virtual/libx11 = "libx11-trim" PREFERRED_PROVIDER_virtual/libgl = "xpsb-glx" PREFERRED_PROVIDER_virtual/xserver = "xserver-psb" +PREFERRED_PROVIDER_virtual/xserver-xf86 = "xserver-psb" PREFERRED_PROVIDER_mesa-dri = "xpsb-glx" XSERVER ?= "xserver-psb \ xserver-psb-extension-dri \
@@ -32,16 +25,4 @@ XSERVER ?= "xserver-psb \ xf86-input-keyboard \ xf86-input-evdev" -SERIAL_CONSOLE = "115200 ttyS0" - APPEND += "video=vesafb vga=0x318" - -MACHINE_EXTRA_RRECOMMENDS = "kernel-modules eee-acpi-scripts" - -IMAGE_FSTYPES ?= "ext3 cpio.gz live" - -GLIBC_ADDONS = "nptl" -GLIBC_EXTRA_OECONF = "--with-tls" - -MACHINE_ESSENTIAL_EXTRA_RDEPENDS = "grub" -
Signature · 1 line
1.7.0.4
PATCH 14/17 meta-intel: update READMEs with new layer info
In reply to [email protected]From: Tom Zanussi <[email protected]>
The affected BSPs now need to access common metadata in locations off of the top level of meta-intel, so need to add meta-intel itself to their layer configuration. This updates the READMEs for those BSPs to mention that.
Signed-off-by Tom Zanussi <[email protected]>
--- meta-crownbay/README | 4 +++- meta-emenlow/README | 4 +++- meta-fishriver/README | 4 +++- meta-fri2/README | 5 ++++- meta-jasperforest/README | 8 +++++--- meta-romley/README | 4 +++- meta-sugarbay/README | 4 +++- 7 files changed, 24 insertions(+), 9 deletions(-)
meta-crownbay/README +3 -1
@@ -26,8 +26,10 @@ Package (BSP) Downloads' page of the Yocto Project website. Having done that, and assuming you extracted the BSP tarball contents at the top-level of your yocto build tree, you can build a crownbay image by adding the location of the meta-crownbay layer to -bblayers.conf e.g.: +bblayers.conf, along with the meta-intel layer itself (to access +common metadata shared between BSPs) e.g.: + yocto/meta-intel \ yocto/meta-intel/meta-crownbay \ The meta-crownbay layer contains support for two different machine
meta-emenlow/README +3 -1
@@ -30,8 +30,10 @@ Package (BSP) Downloads' page of the Yocto Project website. Having done that, and assuming you extracted the BSP tarball contents at the top-level of your yocto build tree, you can build an emenlow image by adding the location of the meta-emenlow layer to -bblayers.conf e.g.: +bblayers.conf, along with the meta-intel layer itself (to access +common metadata shared between BSPs) e.g.: + yocto/meta-intel \ yocto/meta-intel/meta-emenlow \ To enable the emenlow layer, add the emenlow MACHINE to local.conf:
meta-fishriver/README +3 -1
@@ -20,8 +20,10 @@ Package (BSP) Downloads' page of the Yocto Project website. Having done that, and assuming you extracted the BSP tarball contents at the top-level of your yocto build tree, you can build a fishriver image by adding the location of the meta-fishriver layer to -bblayers.conf e.g.: +bblayers.conf, along with the meta-intel layer itself (to access +common metadata shared between BSPs) e.g.: + yocto/meta-intel \ yocto/meta-intel/meta-fishriver \ To enable the fishriver layer, add the fishriver MACHINE to local.conf:
meta-fri2/README +4 -1
@@ -28,8 +28,11 @@ Package (BSP) Downloads' page of the Yocto Project website. Having done that, and assuming you extracted the BSP tarball contents at the top-level of your yocto build tree, you can build an fri2 image -by adding the location of the meta-fri2 layer to bblayers.conf e.g.: +by adding the location of the meta-fri2 layer to bblayers.conf, along +with the meta-intel layer itself (to access common metadata shared +between BSPs) e.g.: + yocto/meta-intel \ yocto/meta-intel/meta-fri2 \ The meta-fri2 layer contains support for two different machine
meta-jasperforest/README +5 -3
@@ -23,10 +23,12 @@ need to download the corresponding BSP tarball from the 'Board Support Package (BSP) Downloads' page of the Yocto Project website. Having done that, and assuming you extracted the BSP tarball contents -at the top-level of your yocto build tree, you can build a jasperforest -image by adding the location of the meta-jasperforest layer to -bblayers.conf e.g.: +at the top-level of your yocto build tree, you can build a +jasperforest image by adding the location of the meta-jasperforest +layer to bblayers.conf, along with the meta-intel layer itself (to +access common metadata shared between BSPs) e.g.: + yocto/meta-intel \ yocto/meta-intel/meta-jasperforest \ To enable the jasperforest layer, add the jasperforest MACHINE to local.conf:
meta-romley/README +3 -1
@@ -22,8 +22,10 @@ Package (BSP) Downloads' page of the Yocto Project website. Having done that, and assuming you extracted the BSP tarball contents at the top-level of your yocto build tree, you can build a romley image by adding the location of the meta-romley layer to -bblayers.conf e.g.: +bblayers.conf, along with the meta-intel layer itself (to access +common metadata shared between BSPs) e.g.: + yocto/meta-intel \ yocto/meta-intel/meta-romley \ To enable the romley layer, add the romley MACHINE to local.conf:
meta-sugarbay/README +3 -1
@@ -23,8 +23,10 @@ Package (BSP) Downloads' page of the Yocto Project website. Having done that, and assuming you extracted the BSP tarball contents at the top-level of your yocto build tree, you can build a sugarbay image by adding the location of the meta-sugarbay layer to -bblayers.conf e.g.: +bblayers.conf, along with the meta-intel layer itself (to access +common metadata shared between BSPs) e.g.: + yocto/meta-intel \ yocto/meta-intel/meta-sugarbay \ To enable the sugarbay layer, add the sugarbay MACHINE to local.conf:
Signature · 1 line
1.7.0.4
PATCH 15/17 meta-crownbay: remove common from BBFILES
In reply to [email protected]From: Tom Zanussi <[email protected]>
metadata in /common is now pulled in by the meta-intel layer, so remove it here.
Signed-off-by Tom Zanussi <[email protected]>
--- meta-crownbay/conf/layer.conf | 4 +--- 1 files changed, 1 insertions(+), 3 deletions(-)
meta-crownbay/conf/layer.conf +1 -3
@@ -3,9 +3,7 @@ BBPATH := "${BBPATH}:${LAYERDIR}" # We have a recipes directory, add to BBFILES BBFILES := "${BBFILES} ${LAYERDIR}/recipes-*/*/*.bb \ - ${LAYERDIR}/recipes-*/*/*.bbappend \ - ${LAYERDIR}/../common/recipes-graphics/*/*.bb \ - ${LAYERDIR}/../common/recipes-graphics/*/*.bbappend" + ${LAYERDIR}/recipes-*/*/*.bbappend" BBFILE_COLLECTIONS += "crownbay" BBFILE_PATTERN_crownbay := "^${LAYERDIR}/"
Signature · 1 line
1.7.0.4
PATCH 16/17 meta-fri2: remove common from BBFILES
In reply to [email protected]From: Tom Zanussi <[email protected]>
metadata in /common is now pulled in by the meta-intel layer, so remove it here.
Signed-off-by Tom Zanussi <[email protected]>
--- meta-fri2/conf/layer.conf | 4 +--- 1 files changed, 1 insertions(+), 3 deletions(-)
meta-fri2/conf/layer.conf +1 -3
@@ -3,9 +3,7 @@ BBPATH := "${BBPATH}:${LAYERDIR}" # We have a recipes directory, add to BBFILES BBFILES := "${BBFILES} ${LAYERDIR}/recipes-*/*/*.bb \ - ${LAYERDIR}/recipes-*/*/*.bbappend \ - ${LAYERDIR}/../common/recipes-graphics/*/*.bb \ - ${LAYERDIR}/../common/recipes-graphics/*/*.bbappend" + ${LAYERDIR}/recipes-*/*/*.bbappend" BBFILE_COLLECTIONS += "fri2" BBFILE_PATTERN_fri2 := "^${LAYERDIR}/"
Signature · 1 line
1.7.0.4
PATCH 17/17 meta-intel: update READMEs with layer dependency list
In reply to [email protected]From: Tom Zanussi <[email protected]>
Add a new 'Dependencies' section listing all the layer dependencies for each BSP.
Signed-off-by Tom Zanussi <[email protected]>
--- meta-crownbay/README | 18 ++++++++++++++++++ meta-emenlow/README | 17 +++++++++++++++++ meta-fishriver/README | 17 +++++++++++++++++ meta-fri2/README | 17 +++++++++++++++++ meta-jasperforest/README | 17 +++++++++++++++++ meta-n450/ReleaseNotes | 4 ++++ meta-romley/README | 18 ++++++++++++++++++ meta-sugarbay/README | 18 ++++++++++++++++++ 8 files changed, 126 insertions(+), 0 deletions(-)
meta-crownbay/README +18 -0
@@ -8,6 +8,24 @@ plus the Intel EG20T Platform Controller Hub (Tunnel Creek + Topcliff). It also supports the E6xx embedded on-chip graphics via the Intel Embedded Media and Graphics Driver (EMGD) 1.8 Driver. + +Dependencies +============ + +This layer depends on: + + URI: git://git.openembedded.org/bitbake + branch: master + + URI: git://git.openembedded.org/openembedded-core + layers: meta + branch: master + + URI: git://git.yoctoproject.org/meta-intel + layers: intel + branch: master + + Table of Contents =================
meta-emenlow/README +17 -0
@@ -13,6 +13,23 @@ depending on which BSP tarball you downloaded. Please see the corresponding sections below for details. +Dependencies +============ + +This layer depends on: + + URI: git://git.openembedded.org/bitbake + branch: master + + URI: git://git.openembedded.org/openembedded-core + layers: meta + branch: master + + URI: git://git.yoctoproject.org/meta-intel + layers: intel + branch: master + + Table of Contents =================
meta-fishriver/README +17 -0
@@ -3,6 +3,23 @@ BSP layer, and booting the images contained in the /binary directory. Please see the corresponding sections below for details. +Dependencies +============ + +This layer depends on: + + URI: git://git.openembedded.org/bitbake + branch: master + + URI: git://git.openembedded.org/openembedded-core + layers: meta + branch: master + + URI: git://git.yoctoproject.org/meta-intel + layers: intel + branch: master + + Table of Contents =================
meta-fri2/README +17 -0
@@ -11,6 +11,23 @@ It also supports the E6xx embedded on-chip graphics via the Intel Embedded Media and Graphics Driver (EMGD) 1.8 Driver. +Dependencies +============ + +This layer depends on: + + URI: git://git.openembedded.org/bitbake + branch: master + + URI: git://git.openembedded.org/openembedded-core + layers: meta + branch: master + + URI: git://git.yoctoproject.org/meta-intel + layers: intel + branch: master + + Table of Contents =================
meta-jasperforest/README +17 -0
@@ -8,6 +8,23 @@ combined with the Intel 3420 PCH chipset (Ibex Peak) make up the 'Picket Post' CRB this BSP was developed on. +Dependencies +============ + +This layer depends on: + + URI: git://git.openembedded.org/bitbake + branch: master + + URI: git://git.openembedded.org/openembedded-core + layers: meta + branch: master + + URI: git://git.yoctoproject.org/meta-intel + layers: intel + branch: master + + Table of Contents =================
meta-n450/ReleaseNotes +4 -0
@@ -16,6 +16,10 @@ This layer depends on: layers: meta branch: master + URI: git://git.yoctoproject.org/meta-intel + layers: intel + branch: master + URI: git://git.yoctoproject.org/poky layers: meta-yocto branch: master
meta-romley/README +18 -0
@@ -5,6 +5,24 @@ Please see the corresponding sections below for details. The 'romley' platform consists of the Intel Sandy Bridge processor, plus the Patsburg chipset. This BSP assumes Matrox graphics is being used. + +Dependencies +============ + +This layer depends on: + + URI: git://git.openembedded.org/bitbake + branch: master + + URI: git://git.openembedded.org/openembedded-core + layers: meta + branch: master + + URI: git://git.yoctoproject.org/meta-intel + layers: intel + branch: master + + Table of Contents =================
meta-sugarbay/README +18 -0
@@ -6,6 +6,24 @@ The 'Sugar Bay' platform consists of the Intel Sandy Bridge processor, plus the Cougar Point PCH (Q67 Express or B65 Express chipsets). This BSP assumes that the Sandy Bridge integrated graphics are being used. + +Dependencies +============ + +This layer depends on: + + URI: git://git.openembedded.org/bitbake + branch: master + + URI: git://git.openembedded.org/openembedded-core + layers: meta + branch: master + + URI: git://git.yoctoproject.org/meta-intel + layers: intel + branch: master + + Table of Contents =================
Signature · 1 line
1.7.0.4