Add PVR feature for Cedartrail
cover Add PVR feature for Cedartrail
From: Kishore Bodke <[email protected]>
Hi,
This is a new feature added to enable PVR for the Cedartrail BSP in the kernel.
Please pull into meta/cfg/kernel-cache/cfg for both linux-yocto-3.0 and linux-yocto-3.2 .
Thanks
Kishore.
The following changes since commit b78a519841bd8b477cad599af8d38df6760445c1:
fri2: use emgd-1.10 (2012-02-05 00:55:05 -0500)
are available in the git repository at:
git://git.pokylinux.org/linux-yocto-2.6.37-contrib kishore/meta-cedartrail/pvr-feature
http://git.pokylinux.org/cgit.cgi/linux-yocto-2.6.37-contrib/log/?h=kishore/meta-cedartrail/pvr-feature
Kishore Bodke (1):
enable pvr features. Cedartrail has pvr kernel features and
patches.
meta/cfg/kernel-cache/cfg/drm-cdvpvr.cfg | 9 +++++++++ meta/cfg/kernel-cache/cfg/drm-cdvpvr.scc | 2 ++ 2 files changed, 11 insertions(+), 0 deletions(-) create mode 100644 meta/cfg/kernel-cache/cfg/drm-cdvpvr.cfg create mode 100644 meta/cfg/kernel-cache/cfg/drm-cdvpvr.scc
Signature · 1 line
1.7.5.4
PATCH 1/1 enable pvr features.
From: Kishore Bodke <[email protected]>
Cedartrail has pvr kernel features and patches.
--- meta/cfg/kernel-cache/cfg/drm-cdvpvr.cfg | 9 +++++++++ meta/cfg/kernel-cache/cfg/drm-cdvpvr.scc | 2 ++ 2 files changed, 11 insertions(+), 0 deletions(-) create mode 100644 meta/cfg/kernel-cache/cfg/drm-cdvpvr.cfg create mode 100644 meta/cfg/kernel-cache/cfg/drm-cdvpvr.scc
meta/cfg/kernel-cache/cfg/drm-cdvpvr.cfg new file +9 -0
@@ -0,0 +1,9 @@ +CONFIG_HIGHMEM4G=y +CONFIG_STAGING=y +CONFIG_DRM=y +CONFIG_SND_HDA_CODEC_HDMI=y +CONFIG_DRM_INTEL_CDV=y +CONFIG_DRM_CDV_RELEASE=y + +# CONFIG_DRM_CDV_DEBUG is not set +# CONFIG_DRM_PVR_PDUMP is not se
meta/cfg/kernel-cache/cfg/drm-cdvpvr.scc new file +2 -0
@@ -0,0 +1,2 @@ +kconf hardware drm-cdvpvr.cfg +git merge yocto/pvr
Signature · 1 line
1.7.5.4
Re: [KERNEL][PATCH 1/1] enable pvr features.
Quoted 33 lines · On 12-02-24 7:35 PM, [email protected] wrote:
From: Kishore Bodke<[email protected]>
Cedartrail has pvr kernel features and patches.
Signed-off-by Kishore Bodke<[email protected]>--- meta/cfg/kernel-cache/cfg/drm-cdvpvr.cfg | 9 +++++++++ meta/cfg/kernel-cache/cfg/drm-cdvpvr.scc | 2 ++ 2 files changed, 11 insertions(+), 0 deletions(-)create mode 100644 meta/cfg/kernel-cache/cfg/drm-cdvpvr.cfg create mode 100644 meta/cfg/kernel-cache/cfg/drm-cdvpvr.scc
meta/cfg/kernel-cache/cfg/drm-cdvpvr.cfg new file +9
-0@@ -0,0 +1,9 @@ +CONFIG_HIGHMEM4G=y +CONFIG_STAGING=y +CONFIG_DRM=y +CONFIG_SND_HDA_CODEC_HDMI=y +CONFIG_DRM_INTEL_CDV=y +CONFIG_DRM_CDV_RELEASE=y + +# CONFIG_DRM_CDV_DEBUG is not set +# CONFIG_DRM_PVR_PDUMP is not semeta/cfg/kernel-cache/cfg/drm-cdvpvr.scc new file +0
-0
meta/cfg/kernel-cache/cfg/drm-cdvpvr.scc line 2
Quoted 2 lines
meta/cfg/kernel-cache/cfg/drm-cdvpvr.scc new file +2
-0@@ -0,0 +1,2 @@ +kconf hardware drm-cdvpvr.cfg +git merge yocto/pvr
I was just completing the merge on this, and I realized that we should put the branch merge in the BSP/machine, not in the generic feature. The configs are good, but we want the cedartrail to do that merge, not the config.
How does that sound to you ? If it is ok, spin me a patch with that merge line removed and I'll push it out right away.
Cheers,
Bruce
Re: [KERNEL][PATCH 1/1] enable pvr features.
Ok. I sent a new pull request after removing the merge line.
Thanks
Kishore.
-----Original Message-----
From: Bruce Ashfield [mailto:[email protected]]
Sent: Sunday, February 26, 2012 9:26 PM
To: Bodke, Kishore K
Cc: [email protected]
Subject: Re: [KERNEL][PATCH 1/1] enable pvr features.
Quoted 33 lines · On 12-02-24 7:35 PM, [email protected] wrote:
From: Kishore Bodke<[email protected]>
Cedartrail has pvr kernel features and patches.
Signed-off-by Kishore Bodke<[email protected]>--- meta/cfg/kernel-cache/cfg/drm-cdvpvr.cfg | 9 +++++++++ meta/cfg/kernel-cache/cfg/drm-cdvpvr.scc | 2 ++ 2 files changed, 11 insertions(+), 0 deletions(-)create mode 100644 meta/cfg/kernel-cache/cfg/drm-cdvpvr.cfg create mode 100644 meta/cfg/kernel-cache/cfg/drm-cdvpvr.scc
meta/cfg/kernel-cache/cfg/drm-cdvpvr.cfg new file +9
-0@@ -0,0 +1,9 @@ +CONFIG_HIGHMEM4G=y +CONFIG_STAGING=y +CONFIG_DRM=y +CONFIG_SND_HDA_CODEC_HDMI=y +CONFIG_DRM_INTEL_CDV=y +CONFIG_DRM_CDV_RELEASE=y + +# CONFIG_DRM_CDV_DEBUG is not set +# CONFIG_DRM_PVR_PDUMP is not semeta/cfg/kernel-cache/cfg/drm-cdvpvr.scc new file +0
-0
meta/cfg/kernel-cache/cfg/drm-cdvpvr.scc line 2
Quoted 2 lines
meta/cfg/kernel-cache/cfg/drm-cdvpvr.scc new file +2
-0@@ -0,0 +1,2 @@ +kconf hardware drm-cdvpvr.cfg +git merge yocto/pvr
I was just completing the merge on this, and I realized that we should put the branch merge in the BSP/machine, not in the generic feature. The configs are good, but we want the cedartrail to do that merge, not the config.
How does that sound to you ? If it is ok, spin me a patch with that merge line removed and I'll push it out right away.
Cheers,
Bruce
Quoted 7 lines · On 12-02-24 7:35 PM, [email protected] wrote:
From: Kishore Bodke<[email protected]>
Hi,
This is a new feature added to enable PVR for the Cedartrail BSP in the kernel.
Please pull into meta/cfg/kernel-cache/cfg for both linux-yocto-3.0 and linux-yocto-3.2 .
Looks good. Merging this in, and creating the content branch. I'll have this in my next consolidated pull.
Bruce
Quoted 22 lines
Thanks
Kishore.The following changes since commit
b78a519841bd8b477cad599af8d38df6760445c1:fri2: use emgd-1.10 (2012-02-05 00:55:05 -0500)are available in the git repository at:
git://git.pokylinux.org/linux-yocto-2.6.37-contribkishore/meta-cedartrail/pvr-feature
http://git.pokylinux.org/cgit.cgi/linux-yocto-2.6.37-contrib/log/?h=kishore/meta-cedartrail/pvr-featureKishore Bodke (1):
enable pvr features. Cedartrail has pvr kernel features and
patches.meta/cfg/kernel-cache/cfg/drm-cdvpvr.cfg | 9 +++++++++ meta/cfg/kernel-cache/cfg/drm-cdvpvr.scc | 2 ++ 2 files changed, 11 insertions(+), 0 deletions(-)create mode 100644 meta/cfg/kernel-cache/cfg/drm-cdvpvr.cfg create mode 100644 meta/cfg/kernel-cache/cfg/drm-cdvpvr.scc