fri2 update

The following changes since commit 64840f55ee144e9814278eaa8e3f33dd60da892c:

meta/emgd: emgd 1.10 updates (2012-03-12 11:48:22 -0400)

are available in the git repository at:
git://git.yoctoproject.org/linux-yocto-2.6.37-contrib dvhart/meta/fri2
http://git.yoctoproject.org/cgit.cgi/linux-yocto-2.6.37-contrib/log/?h=dvhart/meta/fri2

Darren Hart (1):
fri2: Update fri2.cfg for hardware specific support

 meta/cfg/kernel-cache/bsp/fri2/fri2.cfg |   16 ++++++++++++----
 1 files changed, 12 insertions(+), 4 deletions(-)

1.7.5.4

The FRI2 does not require R8169 or PATA support. It does not need SFF or GENERIC ATA options either.

The FRI2 does require IEEE802154 (Zigbee), BT (Bluetooth), and IWLWIFI. The latter is compiled as a module to avoid the need for an initrd containing the firmware blobs.

---
 meta/cfg/kernel-cache/bsp/fri2/fri2.cfg |   16 ++++++++++++----
 1 files changed, 12 insertions(+), 4 deletions(-)

index b101419..97ceecd 100644
@@ -5,16 +5,12 @@ CONFIG_PRINTK=y
 # Basic hardware support for the box - network, USB, PCI, sound
 CONFIG_NETDEVICES=y
 CONFIG_ATA=y
-CONFIG_ATA_GENERIC=y
-CONFIG_ATA_SFF=y
 CONFIG_PCI=y
 CONFIG_MMC=y
 CONFIG_MMC_SDHCI=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB=y
 CONFIG_USB_ARCH_HAS_EHCI=y
-CONFIG_R8169=y
-CONFIG_PATA_SCH=y
 CONFIG_MMC_SDHCI_PCI=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_PCIEPORTBUS=y

@@ -42,3 +38,15 @@ CONFIG_MODULES=y
 CONFIG_SHMEM=y
 CONFIG_TMPFS=y
 CONFIG_PACKET=y
+
+# Enable FRI2 Specific Hardware
+# Zigbee 802.15.4 Support
+CONFIG_IEEE802154=y
+# CONFIG_IEEE802154_6LOWPAN is not set
+
+# Bluetooth Support
+CONFIG_BT=y
+
+# Intel 6205 ABGN
+# Build as a module to avoid having to install the firmware into the initrd
+CONFIG_IWLWIFI=m

1.7.5.4

Queued with my other 3.2 changes. Should be pushed out tomorrow.

Bruce