Skip to contentSkip to conversation

Round up ROOTFS_SIZE after base_size check

PATCH Applied Andrei Gherzan 2 participants 3 messages Sep 13, 2012 – Sep 14, 2012

lore
Share & tools
lore
#0 lore raw

v3 cover Round up ROOTFS_SIZE after base_size check

V3:
Do the whole thing in the same awk

The following changes since commit 0f55a5868457300a3defc7fa7451ef191d19e018:

adt-installer: Allow changing YOCTOADT_REPO (2012-09-05 23:28:10 +0100)

are available in the git repository at:

git://git.yoctoproject.org/poky-contrib ag/rootfs_size
http://git.yoctoproject.org/cgit.cgi/poky-contrib/log/?h=ag/rootfs_size

Andrei Gherzan (1):
image_types.bbclass: Round up ROOTFS_SIZE after base_size check

 meta/classes/image_types.bbclass |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
Signature · 1 line
1.7.9.5
#1 lore raw

PATCH v3 1/1 image_types.bbclass: Round up ROOTFS_SIZE after base_size check

If we round up ROOTFS_SIZE to IMAGE_ROOTFS_ALIGNMENT before checking if base_size is greater then IMAGE_ROOTFS_SIZE, we can end up adding an unaligned value to IMAGE_ROOTFS_SIZE. Obviously, if IMAGE_ROOTFS_EXTRA_SPACE was overwritten with an unaligned value. So let's add the round up code after the base_size calculus and it's comparison.

---
 meta/classes/image_types.bbclass |    6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
meta/classes/image_types.bbclass +3 -3
index d286eea..aa1a785 100644
@@ -82,9 +82,9 @@ runimagecmd () {
 	# The base_size gets calculated:
 	#  - initial size determined by `du -ks` of the IMAGE_ROOTFS
 	#  - then multiplied by the IMAGE_OVERHEAD_FACTOR
-	#  - then rounded up to IMAGE_ROOTFS_ALIGNMENT
-	#  - finally tested against IMAGE_ROOTFS_SIZE
-	ROOTFS_SIZE=`du -ks ${IMAGE_ROOTFS}|awk '{base_size = $1 * ${IMAGE_OVERHEAD_FACTOR} + ${IMAGE_ROOTFS_ALIGNMENT} - 1; base_size -= base_size % ${IMAGE_ROOTFS_ALIGNMENT}; print ((base_size > ${IMAGE_ROOTFS_SIZE} ? base_size : ${IMAGE_ROOTFS_SIZE}) + ${IMAGE_ROOTFS_EXTRA_SPACE}) }'`
+	#  - tested against IMAGE_ROOTFS_SIZE
+	#  - round up ROOTFS_SIZE to IMAGE_ROOTFS_ALIGNMENT
+	ROOTFS_SIZE=`du -ks ${IMAGE_ROOTFS} | awk '{base_size = $1 * ${IMAGE_OVERHEAD_FACTOR}; base_size = ((base_size > ${IMAGE_ROOTFS_SIZE} ? base_size : ${IMAGE_ROOTFS_SIZE}) + ${IMAGE_ROOTFS_EXTRA_SPACE}); if (base_size != int(base_size)) base_size = int(base_size + 1); base_size = base_size + ${IMAGE_ROOTFS_ALIGNMENT} - 1; base_size -= base_size % ${IMAGE_ROOTFS_ALIGNMENT}; print base_size }'`
 	${cmd}
 	# Now create the needed compressed versions
 	cd ${DEPLOY_DIR_IMAGE}/
Signature · 1 line
1.7.9.5
Applied
#2 lore raw
In reply to Andrei Gherzan
Quoted 9 lines · Andrei Gherzan

V3:
Do the whole thing in the same awk

The following changes since commit 0f55a5868457300a3defc7fa7451ef191d19e018:

   adt-installer: Allow changing YOCTOADT_REPO (2012-09-05 23:28:10 +0100)

are available in the git repository at:

Quoted 9 lines

git://git.yoctoproject.org/poky-contrib ag/rootfs_size
http://git.yoctoproject.org/cgit.cgi/poky-contrib/log/?h=ag/rootfs_size

Andrei Gherzan (1):
image_types.bbclass: Round up ROOTFS_SIZE after base_size check

  meta/classes/image_types.bbclass |    6 +++---
  1 file changed, 3 insertions(+), 3 deletions(-)

Merged into OE-Core

Thanks
Sau!