Pull request for branch yem-target-qemu

index 65989f4..806ffd8 100644
@@ -4,7 +4,7 @@
 #
 #############################################################
 
-QEMU_VERSION = 1.3.0
+QEMU_VERSION = 1.3.1
 QEMU_SOURCE = qemu-$(QEMU_VERSION).tar.bz2
 QEMU_SITE = http://wiki.qemu.org/download
 QEMU_LICENSE = GPLv2 LGPLv2.1 MIT BSD-3c BSD-2c Others/BSD-1c

index f4a331c..b04534a 100644
@@ -607,6 +607,7 @@ source "package/empty/Config.in"
 source "package/googlefontdirectory/Config.in"
 source "package/mcrypt/Config.in"
 source "package/mobile-broadband-provider-info/Config.in"
+source "package/qemu/Config.in"
 source "package/shared-mime-info/Config.in"
 source "package/snowball-init/Config.in"
 source "package/sound-theme-borealis/Config.in"

new file mode 100644
index 0000000..b0ed279
@@ -0,0 +1,26 @@
+comment "QEMU requires a toolchain with threads"
+	depends on !BR2_i386 && !BR2_x86_64
+	depends on !BR2_TOOLCHAIN_HAS_THREADS
+
+config BR2_PACKAGE_QEMU
+	bool "QEMU"
+	depends on BR2_i386 || BR2_x86_64
+	depends on BR2_TOOLCHAIN_HAS_THREADS
+	select BR2_PACKAGE_LIBGLIB2
+	select BR2_PACKAGE_PIXMAN
+	select BR2_PACKAGE_ZLIB
+	help
+	  QEMU is a generic and open source machine emulator and virtualizer.
+	  
+	  When used as a machine emulator, QEMU can run OSes and programs made
+	  for one machine (e.g. an ARM board) on a different machine (e.g.
+	  your own PC). By using dynamic translation, it achieves very good
+	  performance.
+	  
+	  When used as a virtualizer, QEMU achieves near native performances
+	  by executing the guest code directly on the host CPU. QEMU supports
+	  virtualization when executing under the Xen hypervisor or using the
+	  KVM kernel module in Linux. When using KVM, QEMU can virtualize x86,
+	  server and embedded PowerPC, and S390 guests.
+	  
+	  http://qemu.org/

78 lines not on this page · raw message

index b0ed279..9bfe37d 100644
@@ -24,3 +24,35 @@ config BR2_PACKAGE_QEMU
 	  server and embedded PowerPC, and S390 guests.
 	  
 	  http://qemu.org/
+
+if BR2_PACKAGE_QEMU
+
+comment "Emulators selection"
+
+# QEMU 1.2.x requires that at least one target emulation be selected, so
+# we use the following two symbols to force systems emulation if user
+# emulation is not selected. This limitation will be lifted when qemu-1.3.0
+# is out.
+config BR2_PACKAGE_QEMU_EMUL_SET
+	bool
+
+config BR2_PACKAGE_QEMU_FORCE_SYSTEM
+	bool
+	default n if BR2_PACKAGE_QEMU_EMUL_SET
+	default y if ! BR2_PACKAGE_QEMU_EMUL_SET
+	select BR2_PACKAGE_QEMU_SYSTEM
+
+config BR2_PACKAGE_QEMU_SYSTEM
+	bool "Enable all systems emulation"
+	help
+	  Say 'y' to build all system emulators/virtualisers that QEMU supports.
+
+config BR2_PACKAGE_QEMU_LINUX_USER
+	bool "Enable all Linux user-land emulation"
+	select BR2_PACKAGE_QEMU_EMUL_SET
+	help
+	  Say 'y' to build all Linux user-land emulators that QEMU supports.
+
+# Note: bsd-user can not be build on Linux
+
+endif # BR2_PACKAGE_QEMU

index 6dfcdd9..c2302fa 100644
@@ -97,6 +97,18 @@ QEMU_VARS =
     PYTHON=$(HOST_DIR)/usr/bin/python                                               \
     PYTHONPATH=$(TARGET_DIR)/usr/lib/python$(PYTHON_VERSION_MAJOR)/site-packages    \
 
+ifeq ($(BR2_PACKAGE_QEMU_SYSTEM),y)
+QEMU_OPTS += --enable-system
+else
+QEMU_OPTS += --disable-system
+endif
+
+ifeq ($(BR2_PACKAGE_QEMU_LINUX_USER),y)
+QEMU_OPTS += --enable-linux-user
+else
+QEMU_OPTS += --disable-linux-user
+endif
+
 # Note: although QEMU uses a ./configure script, it is not compatible with
 #       the traditional autotools options (eg. --target et al.), so we have
 #       to override the default provided by the autotools-package infra, and

@@ -118,8 +130,6 @@ define QEMU_CONFIGURE_CMDS
 	        --enable-nptl                       \
 	        --enable-attr                       \
 	        --enable-vhost-net                  \
-	        --enable-system                     \
-	        --enable-linux-user                 \
 	        --disable-bsd-user                  \
 	        --disable-xen                       \
 	        --disable-slirp                     \

index 9bfe37d..4f1576b 100644
@@ -29,6 +29,25 @@ if BR2_PACKAGE_QEMU
 
 comment "Emulators selection"
 
+config BR2_PACKAGE_QEMU_CUSTOM_TARGETS
+	string "Enable specific targets"
+	help
+	  Enter here the list of QEMU targets you want to build. For example:
+
+	    System emulation      | User-land emulation
+	    ----------------------+-----------------------
+	    i386-softmmu          | i386-linux-user
+	    arm-softmmu           | ppc-linux-user
+	    x86_64-softmmu        | sparc-bsd-user
+	    ...                   | ...
+
+config QEMU_FOO
+	bool # To break the indentation
+
+if BR2_PACKAGE_QEMU_CUSTOM_TARGETS = ""
+
+comment "... or you can select emulator families to enable, below:"
+
 # QEMU 1.2.x requires that at least one target emulation be selected, so
 # we use the following two symbols to force systems emulation if user
 # emulation is not selected. This limitation will be lifted when qemu-1.3.0

@@ -55,4 +74,6 @@ config BR2_PACKAGE_QEMU_LINUX_USER
 
 # Note: bsd-user can not be build on Linux
 
+endif # BR2_PACKAGE_QEMU_CUSTOM_TARGETS == ""
+
 endif # BR2_PACKAGE_QEMU

index c2302fa..c91c79b 100644
@@ -109,6 +109,10 @@ else
 QEMU_OPTS += --disable-linux-user
 endif
 
+ifneq ($(call qstrip,$(BR2_PACKAGE_QEMU_CUSTOM_TARGETS)),)
+QEMU_OPTS += --target-list="$(call qstrip,$(BR2_PACKAGE_QEMU_CUSTOM_TARGETS))"
+endif
+
 # Note: although QEMU uses a ./configure script, it is not compatible with
 #       the traditional autotools options (eg. --target et al.), so we have
 #       to override the default provided by the autotools-package infra, and

index 4f1576b..ad934ae 100644
@@ -76,4 +76,13 @@ config BR2_PACKAGE_QEMU_LINUX_USER
 
 endif # BR2_PACKAGE_QEMU_CUSTOM_TARGETS == ""
 
+comment "Frontends"
+
+config BR2_PACKAGE_QEMU_SDL
+	bool "Enable SDL frontend"
+	select BR2_PACKAGE_SDL
+	help
+	  Say 'y' to enable the SDL frontend, that is, a graphical window
+	  presenting the VM's display.
+
 endif # BR2_PACKAGE_QEMU

index c91c79b..1dd0c98 100644
@@ -96,6 +96,7 @@ QEMU_OPTS =
 QEMU_VARS =                                                                         \
     PYTHON=$(HOST_DIR)/usr/bin/python                                               \
     PYTHONPATH=$(TARGET_DIR)/usr/lib/python$(PYTHON_VERSION_MAJOR)/site-packages    \
+    SDL_CONFIG=$(STAGING_DIR)/usr/bin/sdl-config                                    \
 
 ifeq ($(BR2_PACKAGE_QEMU_SYSTEM),y)
 QEMU_OPTS += --enable-system

@@ -113,6 +114,14 @@ ifneq ($(call qstrip,$(BR2_PACKAGE_QEMU_CUSTOM_TARGETS)),)
 QEMU_OPTS += --target-list="$(call qstrip,$(BR2_PACKAGE_QEMU_CUSTOM_TARGETS))"
 endif
 
+ifeq ($(BR2_PACKAGE_QEMU_SDL),y)
+QEMU_OPTS += --enable-sdl
+QEMU_DEPENDENCIES += sdl
+QEMU_VARS += SDL_CONFIG=$(BR2_STAGING_DIR)/usr/bin/sdl-config
+else
+QEMU_OPTS += --disable-sdl
+endif
+
 # Note: although QEMU uses a ./configure script, it is not compatible with
 #       the traditional autotools options (eg. --target et al.), so we have
 #       to override the default provided by the autotools-package infra, and

@@ -137,7 +146,6 @@ define QEMU_CONFIGURE_CMDS
 	        --disable-bsd-user                  \
 	        --disable-xen                       \
 	        --disable-slirp                     \
-	        --disable-sdl                       \
 	        --disable-vnc                       \
 	        --disable-virtfs                    \
 	        --disable-brlapi                    \

index ad934ae..d904566 100644
@@ -78,6 +78,13 @@ endif # BR2_PACKAGE_QEMU_CUSTOM_TARGETS == ""
 
 comment "Frontends"
 
+config BR2_PACKAGE_QEMU_VNC
+	bool "Enable VNC frontend"
+	select BR2_PACKAGE_VNC
+	help
+	  Say 'y' to enable the VNC frontend, that is, QEMU will act as a
+	  VNC server presenting the VM's display.
+
 config BR2_PACKAGE_QEMU_SDL
 	bool "Enable SDL frontend"
 	select BR2_PACKAGE_SDL

index 1dd0c98..c122be7 100644
@@ -114,6 +114,12 @@ ifneq ($(call qstrip,$(BR2_PACKAGE_QEMU_CUSTOM_TARGETS)),)
 QEMU_OPTS += --target-list="$(call qstrip,$(BR2_PACKAGE_QEMU_CUSTOM_TARGETS))"
 endif
 
+ifeq ($(BR2_PACKAGE_QEMU_VNC),y)
+QEMU_OPTS += --enable-vnc
+else
+QEMU_OPTS += --disable-vnc
+endif
+
 ifeq ($(BR2_PACKAGE_QEMU_SDL),y)
 QEMU_OPTS += --enable-sdl
 QEMU_DEPENDENCIES += sdl

@@ -146,7 +152,10 @@ define QEMU_CONFIGURE_CMDS
 	        --disable-bsd-user                  \
 	        --disable-xen                       \
 	        --disable-slirp                     \
-	        --disable-vnc                       \
+	        --disable-vnc-jpeg                  \
+	        --disable-vnc-png                   \
+	        --disable-vnc-tls                   \
+	        --disable-vnc-sasl                  \
 	        --disable-virtfs                    \
 	        --disable-brlapi                    \
 	        --disable-curses                    \

index d904566..82546a6 100644
@@ -85,6 +85,16 @@ config BR2_PACKAGE_QEMU_VNC
 	  Say 'y' to enable the VNC frontend, that is, QEMU will act as a
 	  VNC server presenting the VM's display.
 
+config BR2_PACKAGE_QEMU_VNC_PNG
+	bool "PNG compression"
+	depends on BR2_PACKAGE_QEMU_VNC
+	select BR2_PACKAGE_LIBPNG
+
+config BR2_PACKAGE_QEMU_VNC_JPEG
+	bool "JPEG compression"
+	depends on BR2_PACKAGE_QEMU_VNC
+	select BR2_PACKAGE_JPEG
+
 config BR2_PACKAGE_QEMU_SDL
 	bool "Enable SDL frontend"
 	select BR2_PACKAGE_SDL

index c122be7..7563e24 100644
@@ -120,6 +120,20 @@ else
 QEMU_OPTS += --disable-vnc
 endif
 
+ifeq ($(BR2_PACKAGE_QEMU_VNC_PNG),y)
+QEMU_OPTS += --enable-vnc-png
+QEMU_DEPENDENCIES += libpng
+else
+QEMU_OPTS += --disable-vnc-png
+endif
+
+ifeq ($(BR2_PACKAGE_QEMU_VNC_JPEG),y)
+QEMU_OPTS += --enable-vnc-jpeg
+QEMU_DEPENDENCIES += jpeg
+else
+QEMU_OPTS += --disable-vnc-jpeg
+endif
+
 ifeq ($(BR2_PACKAGE_QEMU_SDL),y)
 QEMU_OPTS += --enable-sdl
 QEMU_DEPENDENCIES += sdl

@@ -152,8 +166,6 @@ define QEMU_CONFIGURE_CMDS
 	        --disable-bsd-user                  \
 	        --disable-xen                       \
 	        --disable-slirp                     \
-	        --disable-vnc-jpeg                  \
-	        --disable-vnc-png                   \
 	        --disable-vnc-tls                   \
 	        --disable-vnc-sasl                  \
 	        --disable-virtfs                    \

index 82546a6..1e80f6a 100644
@@ -95,6 +95,17 @@ config BR2_PACKAGE_QEMU_VNC_JPEG
 	depends on BR2_PACKAGE_QEMU_VNC
 	select BR2_PACKAGE_JPEG
 
+# TLS does not work with static link, because the gnutls .pc is missing a
+# dependency on libintl... :-(
+config BR2_PACKAGE_QEMU_VNC_TLS
+	bool "TLS encryption"
+	depends on BR2_PACKAGE_QEMU_VNC
+	depends on !BR2_PREFER_STATIC_LIB
+	select BR2_PACKAGE_GNUTLS
+
+comment "VNC TLS encryption does not work for static link"
+    depends on BR2_PACKAGE_QEMU_VNC && BR2_PREFER_STATIC_LIB
+
 config BR2_PACKAGE_QEMU_SDL
 	bool "Enable SDL frontend"
 	select BR2_PACKAGE_SDL

index 7563e24..fbf08fc 100644
@@ -134,6 +134,13 @@ else
 QEMU_OPTS += --disable-vnc-jpeg
 endif
 
+ifeq ($(BR2_PACKAGE_QEMU_VNC_TLS),y)
+QEMU_OPTS += --enable-vnc-tls
+QEMU_DEPENDENCIES += gnutls
+else
+QEMU_OPTS += --disable-vnc-tls
+endif
+
 ifeq ($(BR2_PACKAGE_QEMU_SDL),y)
 QEMU_OPTS += --enable-sdl
 QEMU_DEPENDENCIES += sdl

@@ -166,7 +173,6 @@ define QEMU_CONFIGURE_CMDS
 	        --disable-bsd-user                  \
 	        --disable-xen                       \
 	        --disable-slirp                     \
-	        --disable-vnc-tls                   \
 	        --disable-vnc-sasl                  \
 	        --disable-virtfs                    \
 	        --disable-brlapi                    \

index 1e80f6a..54f49ff 100644
@@ -113,4 +113,20 @@ config BR2_PACKAGE_QEMU_SDL
 	  Say 'y' to enable the SDL frontend, that is, a graphical window
 	  presenting the VM's display.
 
+comment "Misc. features"
+
+config BR2_PACKAGE_QEMU_BLOBS
+	bool "Install binary blobs"
+	default y
+	help
+	  Say 'y' here (the default) to install binary blobs (such as BIOS
+	  or firmwares for the different machines simulated by QEMU).
+	  Say 'n' to not install those blobs.
+	  
+	  Note: Some machines may be unbootable without those blobs.
+	        If unsure, say 'y'.
+	  
+	  Note2: This has nothing to do with the licensing of the blobs;
+	         some (most?) even have a free and/or open source license.
+
 endif # BR2_PACKAGE_QEMU

index fbf08fc..49e2f35 100644
@@ -149,6 +149,10 @@ else
 QEMU_OPTS += --disable-sdl
 endif
 
+ifeq ($(BR2_PACKAGE_QEMU_BLOBS),)
+QEMU_OPTS += --disable-blobs
+endif
+
 # Note: although QEMU uses a ./configure script, it is not compatible with
 #       the traditional autotools options (eg. --target et al.), so we have
 #       to override the default provided by the autotools-package infra, and

index 54f49ff..41c4cf2 100644
@@ -129,4 +129,16 @@ config BR2_PACKAGE_QEMU_BLOBS
 	  Note2: This has nothing to do with the licensing of the blobs;
 	         some (most?) even have a free and/or open source license.
 
+config BR2_PACKAGE_QEMU_KEYMAPS
+	string "Keymaps to keep"
+	default "all"
+	help
+	  Enter the list of keymap(s) to keep. To keep many keymaps, you can
+	  use shell globs, or you can enter a space-separated list of keymaps:
+	    - empty to remove all keymaps
+	    - 'all' to keep all keymaps
+	    - 'fr*' to keep all french keymaps
+	    - 'de fr* en-*' for german, french and english keymaps
+	    - and so on (see the QEMU source for all supported keymaps)
+
 endif # BR2_PACKAGE_QEMU

61 lines not on this page · raw message

index 41c4cf2..4952c34 100644
@@ -115,6 +115,16 @@ config BR2_PACKAGE_QEMU_SDL
 
 comment "Misc. features"
 
+config BR2_PACKAGE_QEMU_UUID
+	bool "Enable VMs UUID"
+	depends on BR2_PACKAGE_UTIL_LINUX
+	select BR2_PACKAGE_UTIL_LINUX_LIBUUID
+	help
+	  Say 'y' here to have QEMU support UUIDs for VMs.
+
+comment "UUID support requires util-linux (for libuuid)"
+	depends on !BR2_PACKAGE_UTIL_LINUX
+
 config BR2_PACKAGE_QEMU_BLOBS
 	bool "Install binary blobs"
 	default y

index ea1487a..bdccbf5 100644
@@ -149,6 +149,13 @@ else
 QEMU_OPTS += --disable-sdl
 endif
 
+ifeq ($(BR2_PACKAGE_QEMU_UUID),y)
+QEMU_OPTS += --enable-uuid
+QEMU_DEPENDENCIES += util-linux
+else
+QEMU_OPTS += --disable-uuid
+endif
+
 ifeq ($(BR2_PACKAGE_QEMU_BLOBS),)
 QEMU_OPTS += --disable-blobs
 endif

@@ -240,7 +247,6 @@ define QEMU_CONFIGURE_CMDS
 	        --disable-fdt                       \
 	        --disable-bluez                     \
 	        --disable-guest-base                \
-	        --disable-uuid                      \
 	        --disable-vde                       \
 	        --disable-linux-aio                 \
 	        --disable-cap-ng                    \

index 4952c34..2c46937 100644
@@ -125,6 +125,13 @@ config BR2_PACKAGE_QEMU_UUID
 comment "UUID support requires util-linux (for libuuid)"
 	depends on !BR2_PACKAGE_UTIL_LINUX
 
+config BR2_PACKAGE_QEMU_CAP
+	bool "Enable capabilities"
+	select BR2_PACKAGE_LIBCAP
+	select BR2_PACKAGE_LIBCAP_NG
+	help
+	  Say 'y' here if you want QEMU to support capabilities.
+
 config BR2_PACKAGE_QEMU_BLOBS
 	bool "Install binary blobs"
 	default y

index bdccbf5..7e704b9 100644
@@ -156,6 +156,16 @@ else
 QEMU_OPTS += --disable-uuid
 endif
 
+# There's no configure flag to disable use of libcap
+# so we must use an environment variable
+ifeq ($(BR2_PACKAGE_QEMU_CAP),y)
+QEMU_OPTS += --enable-cap-ng
+QEMU_DEPENDENCIES += libcap libcap-ng
+else
+QEMU_OPTS += --disable-cap-ng
+QEMU_VARS += cap=no
+endif
+
 ifeq ($(BR2_PACKAGE_QEMU_BLOBS),)
 QEMU_OPTS += --disable-blobs
 endif

@@ -249,7 +259,6 @@ define QEMU_CONFIGURE_CMDS
 	        --disable-guest-base                \
 	        --disable-vde                       \
 	        --disable-linux-aio                 \
-	        --disable-cap-ng                    \
 	        --disable-docs                      \
 	        --disable-spice                     \
 	        --disable-rbd                       \

index 2c46937..8719bde 100644
@@ -132,6 +132,12 @@ config BR2_PACKAGE_QEMU_CAP
 	help
 	  Say 'y' here if you want QEMU to support capabilities.
 
+config BR2_PACKAGE_QEMU_ATTR
+	bool "Enable attr and xattr"
+	help
+	  Say 'y' here to have QEMU support attributes (attr) and eXtended
+	  attibutes (xattr).
+
 config BR2_PACKAGE_QEMU_BLOBS
 	bool "Install binary blobs"
 	default y

index 7e704b9..c5861f0 100644
@@ -166,6 +166,12 @@ QEMU_OPTS += --disable-cap-ng
 QEMU_VARS += cap=no
 endif
 
+ifeq ($(BR2_PACKAGE_QEMU_ATTR),y)
+QEMU_OPTS += --enable-attr
+else
+QEMU_OPTS += --disable-attr
+endif
+
 ifeq ($(BR2_PACKAGE_QEMU_BLOBS),)
 QEMU_OPTS += --disable-blobs
 endif

@@ -244,7 +250,6 @@ define QEMU_CONFIGURE_CMDS
 	        --audio-card-list=                  \
 	        --enable-kvm                        \
 	        --enable-nptl                       \
-	        --enable-attr                       \
 	        --enable-vhost-net                  \
 	        --disable-bsd-user                  \
 	        --disable-xen                       \

index 8719bde..75df82b 100644
@@ -113,6 +113,22 @@ config BR2_PACKAGE_QEMU_SDL
 	  Say 'y' to enable the SDL frontend, that is, a graphical window
 	  presenting the VM's display.
 
+comment "Block backends"
+
+config BR2_PACKAGE_QEMU_VIRTFS
+	bool "Enable plan9 ressources using VirtFS"
+	select BR2_PACKAGE_QEMU_CAP
+	select BR2_PACKAGE_QEMU_ATTR
+	help
+	  Say 'y' here if you want QEMU to provide a plan9 virtual "share"
+	  accessible from the guest OS for relatively fast access to host
+	  files.
+	  
+	  This requires that the guest OS is capable of accessing plan9
+	  ressources (typically, in Linux, this is done by a network
+	  file-system called 9p, and can be accelerated by using the 9p
+	  virtio).
+
 comment "Misc. features"
 
 config BR2_PACKAGE_QEMU_UUID

index c5861f0..39e5c49 100644
@@ -149,6 +149,12 @@ else
 QEMU_OPTS += --disable-sdl
 endif
 
+ifeq ($(BR2_PACKAGE_QEMU_VIRTFS),y)
+QEMU_OPTS += --enable-virtfs
+else
+QEMU_OPTS += --disable-virtfs
+endif
+
 ifeq ($(BR2_PACKAGE_QEMU_UUID),y)
 QEMU_OPTS += --enable-uuid
 QEMU_DEPENDENCIES += util-linux

@@ -255,7 +261,6 @@ define QEMU_CONFIGURE_CMDS
 	        --disable-xen                       \
 	        --disable-slirp                     \
 	        --disable-vnc-sasl                  \
-	        --disable-virtfs                    \
 	        --disable-brlapi                    \
 	        --disable-curses                    \
 	        --disable-curl                      \

index 75df82b..4e5b81b 100644
@@ -129,6 +129,16 @@ config BR2_PACKAGE_QEMU_VIRTFS
 	  file-system called 9p, and can be accelerated by using the 9p
 	  virtio).
 
+config BR2_PACKAGE_QEMU_CURL
+	bool "Enable remote block-devices using cURL"
+	depends on !BR2_PREFER_STATIC_LIB
+	select BR2_PACKAGE_LIBCURL
+	help
+	  Say 'y' to access remote block-devices using libcurl.
+
+comment "cURL support is not possible with static linking"
+    depends on BR2_PREFER_STATIC_LIB
+
 comment "Misc. features"
 
 config BR2_PACKAGE_QEMU_UUID

index 39e5c49..6fda51e 100644
@@ -155,6 +155,13 @@ else
 QEMU_OPTS += --disable-virtfs
 endif
 
+ifeq ($(BR2_PACKAGE_QEMU_CURL),y)
+QEMU_OPTS += --enable-curl
+QEMU_DEPENDENCIES += libcurl
+else
+QEMU_OPTS += --disable-curl
+endif
+
 ifeq ($(BR2_PACKAGE_QEMU_UUID),y)
 QEMU_OPTS += --enable-uuid
 QEMU_DEPENDENCIES += util-linux

@@ -263,7 +270,6 @@ define QEMU_CONFIGURE_CMDS
 	        --disable-vnc-sasl                  \
 	        --disable-brlapi                    \
 	        --disable-curses                    \
-	        --disable-curl                      \
 	        --disable-fdt                       \
 	        --disable-bluez                     \
 	        --disable-guest-base                \

index 4e5b81b..dbe7cb9 100644
@@ -113,6 +113,17 @@ config BR2_PACKAGE_QEMU_SDL
 	  Say 'y' to enable the SDL frontend, that is, a graphical window
 	  presenting the VM's display.
 
+config BR2_PACKAGE_QEMU_CURSES
+	bool "Enable the curses frontend"
+	select BR2_PACKAGE_NCURSES
+	help
+	  Say 'y' to use curses to display the text-mode of VGA outpout.
+	  
+	  If the VM's graphic adapter does not support VGA text-mode, or it
+	  is in graphical mode, then nothing will be displayed with this
+	  frontend (although you can still use the SDL or VNC frontends to
+	  display the graphical output).
+
 comment "Block backends"
 
 config BR2_PACKAGE_QEMU_VIRTFS

index 6fda51e..055c151 100644
@@ -149,6 +149,13 @@ else
 QEMU_OPTS += --disable-sdl
 endif
 
+ifeq ($(BR2_PACKAGE_QEMU_CURSES),y)
+QEMU_OPTS += --enable-curses
+QEMU_DEPENDENCIES += ncurses
+else
+QEMU_OPTS += --disable-curses
+endif
+
 ifeq ($(BR2_PACKAGE_QEMU_VIRTFS),y)
 QEMU_OPTS += --enable-virtfs
 else

@@ -269,7 +276,6 @@ define QEMU_CONFIGURE_CMDS
 	        --disable-slirp                     \
 	        --disable-vnc-sasl                  \
 	        --disable-brlapi                    \
-	        --disable-curses                    \
 	        --disable-fdt                       \
 	        --disable-bluez                     \
 	        --disable-guest-base                \

index dbe7cb9..f22bb19 100644
@@ -150,6 +150,17 @@ config BR2_PACKAGE_QEMU_CURL
 comment "cURL support is not possible with static linking"
     depends on BR2_PREFER_STATIC_LIB
 
+comment "Networking"
+
+config BR2_PACKAGE_QEMU_BLUEZ
+	bool "Enable BlueZ connectivity"
+	depends on BR2_PACKAGE_BLUEZ_UTILS
+	help
+	  Say 'y' here to enable BlueZ (bluetooth) connectivity in QEMU.
+
+comment "BlueZ connectivity depends on bluez-utils"
+	depends on !BR2_PACKAGE_BLUEZ_UTILS
+
 comment "Misc. features"
 
 config BR2_PACKAGE_QEMU_UUID

index 055c151..4377b54 100644
@@ -169,6 +169,13 @@ else
 QEMU_OPTS += --disable-curl
 endif
 
+ifeq ($(BR2_PACKAGE_QEMU_BLUEZ),y)
+QEMU_OPTS += --enable-bluez
+QEMU_DEPENDENCIES += bluez_utils
+else
+QEMU_OPTS += --disable-bluez
+endif
+
 ifeq ($(BR2_PACKAGE_QEMU_UUID),y)
 QEMU_OPTS += --enable-uuid
 QEMU_DEPENDENCIES += util-linux

@@ -277,7 +284,6 @@ define QEMU_CONFIGURE_CMDS
 	        --disable-vnc-sasl                  \
 	        --disable-brlapi                    \
 	        --disable-fdt                       \
-	        --disable-bluez                     \
 	        --disable-guest-base                \
 	        --disable-vde                       \
 	        --disable-linux-aio                 \

index f22bb19..d57d2e9 100644
@@ -150,6 +150,15 @@ config BR2_PACKAGE_QEMU_CURL
 comment "cURL support is not possible with static linking"
     depends on BR2_PREFER_STATIC_LIB
 
+config BR2_PACKAGE_QEMU_AIO
+	bool "Enable AIO"
+	depends on BR2_PACKAGE_LIBAIO
+	help
+	  Say 'y' here to enable Asynchronous Input/Output (AIO).
+
+comment "AIO support depends on libaio"
+	depends on !BR2_PACKAGE_LIBAIO
+
 comment "Networking"
 
 config BR2_PACKAGE_QEMU_BLUEZ

index 4377b54..31bd2e7 100644
@@ -169,6 +169,13 @@ else
 QEMU_OPTS += --disable-curl
 endif
 
+ifeq ($(BR2_PACKAGE_QEMU_AIO),y)
+QEMU_OPTS += --enable-linux-aio
+QEMU_DEPENDENCIES += libaio
+else
+QEMU_OPTS += --disable-linux-aio
+endif
+
 ifeq ($(BR2_PACKAGE_QEMU_BLUEZ),y)
 QEMU_OPTS += --enable-bluez
 QEMU_DEPENDENCIES += bluez_utils

@@ -286,7 +293,6 @@ define QEMU_CONFIGURE_CMDS
 	        --disable-fdt                       \
 	        --disable-guest-base                \
 	        --disable-vde                       \
-	        --disable-linux-aio                 \
 	        --disable-docs                      \
 	        --disable-spice                     \
 	        --disable-rbd                       \

index d57d2e9..123fe6b 100644
@@ -170,6 +170,13 @@ config BR2_PACKAGE_QEMU_BLUEZ
 comment "BlueZ connectivity depends on bluez-utils"
 	depends on !BR2_PACKAGE_BLUEZ_UTILS
 
+config BR2_PACKAGE_QEMU_VDE
+	bool "Enable VDE"
+	select BR2_PACKAGE_VDE2
+	help
+	  Say 'y' here to have QEMU connect to VDE (Virtual Distributed
+	  Ethernet) switches.
+
 comment "Misc. features"
 
 config BR2_PACKAGE_QEMU_UUID

index 31bd2e7..9915155 100644
@@ -183,6 +183,13 @@ else
 QEMU_OPTS += --disable-bluez
 endif
 
+ifeq ($(BR2_PACKAGE_QEMU_VDE),y)
+QEMU_OPTS += --enable-vde
+QEMU_DEPENDENCIES += vde2
+else
+QEMU_OPTS += --disable-vde
+endif
+
 ifeq ($(BR2_PACKAGE_QEMU_UUID),y)
 QEMU_OPTS += --enable-uuid
 QEMU_DEPENDENCIES += util-linux

@@ -292,7 +299,6 @@ define QEMU_CONFIGURE_CMDS
 	        --disable-brlapi                    \
 	        --disable-fdt                       \
 	        --disable-guest-base                \
-	        --disable-vde                       \
 	        --disable-docs                      \
 	        --disable-spice                     \
 	        --disable-rbd                       \

index 123fe6b..9f50533 100644
@@ -150,6 +150,12 @@ config BR2_PACKAGE_QEMU_CURL
 comment "cURL support is not possible with static linking"
     depends on BR2_PREFER_STATIC_LIB
 
+config BR2_PACKAGE_QEMU_ISCSI
+	bool "Enable remote block-devices using iSCSI"
+	select BR2_PACKAGE_LIBISCSI
+	help
+	  Say 'y' here to have QEMU use iSCSI targets as block-devices.
+
 config BR2_PACKAGE_QEMU_AIO
 	bool "Enable AIO"
 	depends on BR2_PACKAGE_LIBAIO

index 9915155..77ecde4 100644
@@ -169,6 +169,13 @@ else
 QEMU_OPTS += --disable-curl
 endif
 
+ifeq ($(BR2_PACKAGE_QEMU_ISCSI),y)
+QEMU_OPTS += --enable-libiscsi
+QEMU_DEPENDENCIES += libiscsi
+else
+QEMU_OPTS += --disable-libiscsi
+endif
+
 ifeq ($(BR2_PACKAGE_QEMU_AIO),y)
 QEMU_OPTS += --enable-linux-aio
 QEMU_DEPENDENCIES += libaio

@@ -302,7 +309,6 @@ define QEMU_CONFIGURE_CMDS
 	        --disable-docs                      \
 	        --disable-spice                     \
 	        --disable-rbd                       \
-	        --disable-libiscsi                  \
 	        --disable-usb-redir                 \
 	        --disable-smartcard                 \
 	        --disable-strip                     \

index 9f50533..3b0221e 100644
@@ -156,6 +156,15 @@ config BR2_PACKAGE_QEMU_ISCSI
 	help
 	  Say 'y' here to have QEMU use iSCSI targets as block-devices.
 
+config BR2_PACKAGE_QEMU_USBREDIR
+	bool "Enable USB redirection"
+	depends on BR2_PACKAGE_USBREDIR
+	help
+	  Say 'y' here to have QEMU support USB redirection over the network.
+
+comment "USB redirection requires usbredir"
+	depends on !BR2_PACKAGE_USBREDIR
+
 config BR2_PACKAGE_QEMU_AIO
 	bool "Enable AIO"
 	depends on BR2_PACKAGE_LIBAIO

index 77ecde4..195a808 100644
@@ -176,6 +176,13 @@ else
 QEMU_OPTS += --disable-libiscsi
 endif
 
+ifeq ($(BR2_PACKAGE_QEMU_USBREDIR),y)
+QEMU_OPTS += --enable-usb-redir
+QEMU_DEPENDENCIES += usbredir
+else
+QEMU_OPTS += --disable-usb-redir
+endif
+
 ifeq ($(BR2_PACKAGE_QEMU_AIO),y)
 QEMU_OPTS += --enable-linux-aio
 QEMU_DEPENDENCIES += libaio

@@ -309,7 +316,6 @@ define QEMU_CONFIGURE_CMDS
 	        --disable-docs                      \
 	        --disable-spice                     \
 	        --disable-rbd                       \
-	        --disable-usb-redir                 \
 	        --disable-smartcard                 \
 	        --disable-strip                     \
 	        --disable-seccomp                   \

index 3b0221e..0e45b18 100644
@@ -124,6 +124,15 @@ config BR2_PACKAGE_QEMU_CURSES
 	  frontend (although you can still use the SDL or VNC frontends to
 	  display the graphical output).
 
+config BR2_PACKAGE_QEMU_SPICE
+	bool "Enable Spice frontend"
+	depends on BR2_PACKAGE_SPICE
+	help
+	  Say 'y' here to have QEMU support Spice as a (VNC-like) frontend.
+
+comment "Spice support requires spice-server"
+	depends on !BR2_PACKAGE_SPICE
+
 comment "Block backends"
 
 config BR2_PACKAGE_QEMU_VIRTFS

index 195a808..8a082b4 100644
@@ -156,6 +156,13 @@ else
 QEMU_OPTS += --disable-curses
 endif
 
+ifeq ($(BR2_PACKAGE_QEMU_SPICE),y)
+QEMU_OPTS += --enable-spice
+QEMU_DEPENDENCIES += spice
+else
+QEMU_OPTS += --disable-spice
+endif
+
 ifeq ($(BR2_PACKAGE_QEMU_VIRTFS),y)
 QEMU_OPTS += --enable-virtfs
 else

@@ -314,7 +321,6 @@ define QEMU_CONFIGURE_CMDS
 	        --disable-fdt                       \
 	        --disable-guest-base                \
 	        --disable-docs                      \
-	        --disable-spice                     \
 	        --disable-rbd                       \
 	        --disable-smartcard                 \
 	        --disable-strip                     \

index 0e45b18..d6b2f95 100644
@@ -201,6 +201,44 @@ config BR2_PACKAGE_QEMU_VDE
 	  Say 'y' here to have QEMU connect to VDE (Virtual Distributed
 	  Ethernet) switches.
 
+comment "Sound"
+
+config BR2_PACKAGE_QEMU_SOUND_CARDS
+	string "Enable sound cards"
+	default "ac97 es1370 hda"
+	help
+	  Enter here the list of sound cards you want QEMU to emulate.
+	  The available sound cards are:
+	    ac97 es1370 sb16 cs4231a adlib gus hda
+	  
+	  The default is: ac97 es1370 hda
+	  
+	  Note: even if you say 'n' to both alsa and SDL drivers, below, QEMU
+	  always include the 'wav' driver, which stores the generated sound
+	  into a file, and the 'none' driver, which discards generated sound.
+
+config BR2_PACKAGE_QEMU_MIXEMU
+	bool "Enable mixer emulation"
+	help
+	  Say 'y' here to have QEMU emulate a mixer device.
+
+config BR2_PACKAGE_QEMU_SOUND_ALSA
+	bool "Enable sound via alsa"
+	select BR2_PACKAGE_ALSA_LIB
+	help
+	  Say 'y' here to have QEMU play sound from the VMs via alsa.
+	  
+	  Note: this is only for system emulation, not user emulation.
+
+config BR2_PACKAGE_QEMU_SOUND_SDL
+	bool "Enable sound via SDL"
+	select BR2_PACKAGE_QEMU_SDL # Requires that SDL frontend be selected
+	select BR2_PACKAGE_SDL
+	help
+	  Say 'y' here to have QEMU play sound from the VMs via SDL.
+	  
+	  Note: this is only for system emulation, not user emulation.
+
 comment "Misc. features"
 
 config BR2_PACKAGE_QEMU_UUID

index 8a082b4..0cd1a37 100644
@@ -211,6 +211,23 @@ else
 QEMU_OPTS += --disable-vde
 endif
 
+QEMU_SND_DRV =
+ifeq ($(BR2_PACKAGE_QEMU_SOUND_ALSA),y)
+QEMU_SND_DRV += alsa
+QEMU_DEPENDENCIES += alsa-lib
+endif
+ifeq ($(BR2_PACKAGE_QEMU_SOUND_SDL),y)
+QEMU_SND_DRV += sdl
+QEMU_DEPENDENCIES += sdl
+endif
+ifneq ($(QEMU_SND_DRV),)
+QEMU_OPTS += --audio-drv-list="$(QEMU_SND_DRV)"
+endif
+QEMU_OPTS += --audio-card-list=$(BR2_PACKAGE_QEMU_SOUND_CARDS)
+ifeq ($(BR2_PACKAGE_QEMU_MIXEMU),y)
+QEMU_OPTS += --enable-mixemu
+endif
+
 ifeq ($(BR2_PACKAGE_QEMU_UUID),y)
 QEMU_OPTS += --enable-uuid
 QEMU_DEPENDENCIES += util-linux

@@ -308,8 +325,6 @@ define QEMU_CONFIGURE_CMDS
 	        --prefix=/usr                       \
 	        --cross-prefix=$(TARGET_CROSS)      \
 	        --with-system-pixman                \
-	        --audio-drv-list=                   \
-	        --audio-card-list=                  \
 	        --enable-kvm                        \
 	        --enable-nptl                       \
 	        --enable-vhost-net                  \

index d6b2f95..f71311d 100644
@@ -264,6 +264,13 @@ config BR2_PACKAGE_QEMU_ATTR
 	  Say 'y' here to have QEMU support attributes (attr) and eXtended
 	  attibutes (xattr).
 
+config BR2_PACKAGE_QEMU_SECCOMP
+	bool "Enable seccomp filter"
+	select BR2_PACKAGE_LIBSECCOMP
+	help
+	  Say 'y' here to have QEMU to use the Linux kernel's seccomp filter,
+	  to more tightly confine the VMs.
+
 config BR2_PACKAGE_QEMU_BLOBS
 	bool "Install binary blobs"
 	default y

index 0cd1a37..ddee260 100644
@@ -251,6 +251,13 @@ else
 QEMU_OPTS += --disable-attr
 endif
 
+ifeq ($(BR2_PACKAGE_QEMU_SECCOMP),y)
+QEMU_OPTS += --enable-seccomp
+QEMU_DEPENDENCIES += libseccomp
+else
+QEMU_OPTS += --disable-seccomp
+endif
+
 ifeq ($(BR2_PACKAGE_QEMU_BLOBS),)
 QEMU_OPTS += --disable-blobs
 endif

@@ -339,7 +346,6 @@ define QEMU_CONFIGURE_CMDS
 	        --disable-rbd                       \
 	        --disable-smartcard                 \
 	        --disable-strip                     \
-	        --disable-seccomp                   \
 	        --disable-sparse                    \
 	        --disable-tools                     \
 	        $(QEMU_OPTS)                        \

index ddee260..90b1ebf 100644
@@ -262,6 +262,12 @@ ifeq ($(BR2_PACKAGE_QEMU_BLOBS),)
 QEMU_OPTS += --disable-blobs
 endif
 
+ifeq ($(BR2_HAVE_DOCUMENTATION),y)
+QEMU_OPTS += --enable-docs
+else
+QEMU_OPTS += --disable-docs
+endif
+
 # Post-install removal of unwanted keymaps:
 # - if we want 'all', we do nothing;
 # - if we want none, we completely remove the keymap dir

@@ -342,7 +348,6 @@ define QEMU_CONFIGURE_CMDS
 	        --disable-brlapi                    \
 	        --disable-fdt                       \
 	        --disable-guest-base                \
-	        --disable-docs                      \
 	        --disable-rbd                       \
 	        --disable-smartcard                 \
 	        --disable-strip                     \

index f71311d..022b07b 100644
@@ -271,6 +271,12 @@ config BR2_PACKAGE_QEMU_SECCOMP
 	  Say 'y' here to have QEMU to use the Linux kernel's seccomp filter,
 	  to more tightly confine the VMs.
 
+config BR2_PACKAGE_QEMU_TOOLS_ON_TARGET
+	bool "tools on target"
+	help
+	  Say 'y' here to also install QEMU tools (qemu-{img,io,nbd}) on the
+	  target.
+
 config BR2_PACKAGE_QEMU_BLOBS
 	bool "Install binary blobs"
 	default y

index 90b1ebf..d745e0d 100644
@@ -258,6 +258,12 @@ else
 QEMU_OPTS += --disable-seccomp
 endif
 
+ifeq ($(BR2_PACKAGE_QEMU_TOOLS_ON_TARGET),y)
+QEMU_OPTS += --enable-tools
+else
+QEMU_OPTS += --disable-tools
+endif
+
 ifeq ($(BR2_PACKAGE_QEMU_BLOBS),)
 QEMU_OPTS += --disable-blobs
 endif

@@ -352,7 +358,6 @@ define QEMU_CONFIGURE_CMDS
 	        --disable-smartcard                 \
 	        --disable-strip                     \
 	        --disable-sparse                    \
-	        --disable-tools                     \
 	        $(QEMU_OPTS)                        \
 	)
 endef

index 022b07b..64a7e6f 100644
@@ -2,7 +2,7 @@ comment "QEMU requires a toolchain with threads"
 	depends on !BR2_i386 && !BR2_x86_64
 	depends on !BR2_TOOLCHAIN_HAS_THREADS
 
-config BR2_PACKAGE_QEMU
+menuconfig BR2_PACKAGE_QEMU
 	bool "QEMU"
 	depends on BR2_i386 || BR2_x86_64
 	depends on BR2_TOOLCHAIN_HAS_THREADS

index 64a7e6f..e433cc0 100644
@@ -100,11 +100,11 @@ config BR2_PACKAGE_QEMU_VNC_JPEG
 config BR2_PACKAGE_QEMU_VNC_TLS
 	bool "TLS encryption"
 	depends on BR2_PACKAGE_QEMU_VNC
-	depends on !BR2_PREFER_STATIC_LIB
+	depends on !BR2_PACKAGE_QEMU_STATIC
 	select BR2_PACKAGE_GNUTLS
 
 comment "VNC TLS encryption does not work for static link"
-    depends on BR2_PACKAGE_QEMU_VNC && BR2_PREFER_STATIC_LIB
+    depends on BR2_PACKAGE_QEMU_VNC && BR2_PACKAGE_QEMU_STATIC
 
 config BR2_PACKAGE_QEMU_SDL
 	bool "Enable SDL frontend"

@@ -127,11 +127,21 @@ config BR2_PACKAGE_QEMU_CURSES
 config BR2_PACKAGE_QEMU_SPICE
 	bool "Enable Spice frontend"
 	depends on BR2_PACKAGE_SPICE
+	depends on !BR2_PACKAGE_QEMU_STATIC || BR2_PREFER_STATIC_LIB
 	help
 	  Say 'y' here to have QEMU support Spice as a (VNC-like) frontend.
 
-comment "Spice support requires spice-server"
-	depends on !BR2_PACKAGE_SPICE
+	  Note:
+	    Spice links against alsa-libs, but alsa-libs can't be built both
+	    shared and static at the same time, so we can not link with a
+	    static spice to get a static QEMU (BR2_PACKAGE_QEMU_STATIC) if
+	    buildroot as a whole does not also build only static libraries
+	    (BR2_PREFER_STATIC_LIB).
+
+if !BR2_PACKAGE_SPICE || ( BR2_PACKAGE_QEMU_STATIC && !BR2_PREFER_STATIC_LIB )
+comment "Spice support requires spice-server, and does not work for a static"
+comment "build of QEMU unless BR2_PREFER_STATIC_LIB is set, too"
+endif
 
 comment "Block backends"
 

@@ -151,14 +161,10 @@ config BR2_PACKAGE_QEMU_VIRTFS
 
 config BR2_PACKAGE_QEMU_CURL
 	bool "Enable remote block-devices using cURL"
-	depends on !BR2_PREFER_STATIC_LIB
 	select BR2_PACKAGE_LIBCURL
 	help
 	  Say 'y' to access remote block-devices using libcurl.
 
-comment "cURL support is not possible with static linking"
-    depends on BR2_PREFER_STATIC_LIB
-
 config BR2_PACKAGE_QEMU_ISCSI
 	bool "Enable remote block-devices using iSCSI"
 	select BR2_PACKAGE_LIBISCSI

@@ -222,14 +228,21 @@ config BR2_PACKAGE_QEMU_MIXEMU
 	help
 	  Say 'y' here to have QEMU emulate a mixer device.
 
+# Alsa can not build both shared and static libs at the same time.
+# But we may want to build QEMU staticaly, even though the global
+# BR2_PREFER_STATIC_LIB is not set. Disable that case.
 config BR2_PACKAGE_QEMU_SOUND_ALSA
 	bool "Enable sound via alsa"
+	depends on !BR2_PACKAGE_QEMU_STATIC || BR2_PREFER_STATIC_LIB
 	select BR2_PACKAGE_ALSA_LIB
 	help
 	  Say 'y' here to have QEMU play sound from the VMs via alsa.
 	  
 	  Note: this is only for system emulation, not user emulation.
 
+comment "Alsa sound static link works only if BR2_PREFER_STATIC is set"
+	depends on BR2_PACKAGE_QEMU_STATIC && !BR2_PREFER_STATIC_LIB
+
 config BR2_PACKAGE_QEMU_SOUND_SDL
 	bool "Enable sound via SDL"
 	select BR2_PACKAGE_QEMU_SDL # Requires that SDL frontend be selected

@@ -303,4 +316,12 @@ config BR2_PACKAGE_QEMU_KEYMAPS
 	    - 'de fr* en-*' for german, french and english keymaps
 	    - and so on (see the QEMU source for all supported keymaps)
 
+config BR2_PREFER_STATIC_LIB
+    select BR2_PACKAGE_QEMU_STATIC
+
+config BR2_PACKAGE_QEMU_STATIC
+	bool "Build statically"
+	help
+	  Build static qemu executable(s).
+
 endif # BR2_PACKAGE_QEMU

72 lines not on this page · raw message

54 lines not on this page · raw message

index d745e0d..f4705cc 100644
@@ -274,6 +274,10 @@ else
 QEMU_OPTS += --disable-docs
 endif
 
+ifeq ($(BR2_PACKAGE_QEMU_STATIC),y)
+QEMU_OPTS += --static
+endif
+
 # Post-install removal of unwanted keymaps:
 # - if we want 'all', we do nothing;
 # - if we want none, we completely remove the keymap dir

index e433cc0..e5bf7c0 100644
@@ -254,6 +254,13 @@ config BR2_PACKAGE_QEMU_SOUND_SDL
 
 comment "Misc. features"
 
+config BR2_PACKAGE_QEMU_FDT
+        bool "Enable FDT"
+        select BR2_PACKAGE_DTC
+        help
+          Say 'y' here to have QEMU capable of constructing Device Trees,
+          and passing them to the VMs.
+
 config BR2_PACKAGE_QEMU_UUID
 	bool "Enable VMs UUID"
 	depends on BR2_PACKAGE_UTIL_LINUX

index f4705cc..37f81bf 100644
@@ -228,6 +228,13 @@ ifeq ($(BR2_PACKAGE_QEMU_MIXEMU),y)
 QEMU_OPTS += --enable-mixemu
 endif
 
+ifeq ($(BR2_PACKAGE_QEMU_FDT),y)
+QEMU_OPTS += --enable-fdt
+QEMU_DEPENDENCIES += dtc
+else
+QEMU_OPTS += --disable-fdt
+endif
+
 ifeq ($(BR2_PACKAGE_QEMU_UUID),y)
 QEMU_OPTS += --enable-uuid
 QEMU_DEPENDENCIES += util-linux

@@ -356,7 +363,6 @@ define QEMU_CONFIGURE_CMDS
 	        --disable-slirp                     \
 	        --disable-vnc-sasl                  \
 	        --disable-brlapi                    \
-	        --disable-fdt                       \
 	        --disable-guest-base                \
 	        --disable-rbd                       \
 	        --disable-smartcard                 \