Skip to contentSkip to conversation

v2 [PATCH 0/1] pseudo 1.4.3 update

PATCH New Peter Seebach 1 participant 2 messages Feb 5, 2013

lore
Share & tools
lore
#0 lore raw

This fixes (... I hope) a handful of problems relating to libdir computation and sqlite. Basically, pseudo needs to be able to distinguish 32-bit and 64-bit library directories for "where do I store libpseudo.so", but bitbake for native systems always uses "lib" for the directory containing libsqlite.a. Solution: --with-sqlite-lib=${baselib}.

1.4.2/1.4.3 add linkat() support, fix some bitrot on Darwin, and add the configure flags to make this possible.

This *appears* to build for 32-bit and 64-bit SDKMACHINE, targets, and native builds, but I've said that before.

The following changes since commit 3b1beb8b15b8e3e397b3aa8320490103d4f29bac:
Martin Jansa (1):
dropbear: fix RPROVIDES

are available in the git repository at:

git://git.yoctoproject.org/poky-contrib seebs/pseudo143
http://git.yoctoproject.org/cgit.cgi/poky-contrib/log/?h=seebs/pseudo143

Peter Seebach (1):
pseudo.inc: Fix sqlite libdir again, pseudo 1.4.3

 meta/recipes-devtools/pseudo/pseudo.inc      |    8 ++++----
 meta/recipes-devtools/pseudo/pseudo_1.4.1.bb |    8 --------
 meta/recipes-devtools/pseudo/pseudo_1.4.3.bb |    8 ++++++++
 meta/recipes-devtools/pseudo/pseudo_git.bb   |    6 +++---
 4 files changed, 15 insertions(+), 15 deletions(-)
 delete mode 100644 meta/recipes-devtools/pseudo/pseudo_1.4.1.bb
 create mode 100644 meta/recipes-devtools/pseudo/pseudo_1.4.3.bb
#1 lore raw

PATCH 1/1 pseudo.inc: Fix sqlite libdir again, pseudo 1.4.3

This updates to pseudo 1.4.3. Changes:

1. A couple of minor tweaks to reduce difficulties using SDKs built on slightly more recent machines on older machines; specifically, avoiding getting @GLIBC_2.7 symbol references for sscanf(), fscanf(), and open2().
2. Revision of the logic determining the library directory to use for sqlite's library files.

The latter is a source of difficulty because it's come up a few times that we may want pseudo to use lib64 for libpseudo.so, but bitbake's usual setup would have libsqlite3.a in lib regardless of bit width. Cleaned up previous design a bit by providing a distinct setting for sqlite-lib, which defaults to the same library directory used for other things. Adjusted build to use this new setting. (This ends up being ${baselib}; on targets, that might not be lib, but for native builds it generally is, and for SDK builds it appears to do the right thing.)

Testing: Successful build of meta-toolchain for both 64-bit and 32-bit SDKMACHINE, and builds with NO32LIBS = "0" also succeeded. Also builds for multilib targets.

---
 meta/recipes-devtools/pseudo/pseudo.inc      |    8 ++++----
 meta/recipes-devtools/pseudo/pseudo_1.4.1.bb |    8 --------
 meta/recipes-devtools/pseudo/pseudo_1.4.3.bb |    8 ++++++++
 meta/recipes-devtools/pseudo/pseudo_git.bb   |    6 +++---
 4 files changed, 15 insertions(+), 15 deletions(-)
 delete mode 100644 meta/recipes-devtools/pseudo/pseudo_1.4.1.bb
 create mode 100644 meta/recipes-devtools/pseudo/pseudo_1.4.3.bb
meta/recipes-devtools/pseudo/pseudo.inc +4 -4
index 98f706c..9748d54 100644
@@ -30,9 +30,9 @@ NO32LIBS ??= "1"
 # Compile for the local machine arch...
 do_compile () {
 	if [ "${SITEINFO_BITS}" = "64" ]; then
-	  ${S}/configure --prefix=${prefix} --libdir=${prefix}/lib/pseudo/lib${SITEINFO_BITS} --with-sqlite=${STAGING_DIR_TARGET}${exec_prefix} --cflags="${CFLAGS}" --bits=${SITEINFO_BITS} --enable-static-sqlite --without-rpath
+	  ${S}/configure --prefix=${prefix} --libdir=${prefix}/lib/pseudo/lib${SITEINFO_BITS} --with-sqlite-lib=${baselib} --with-sqlite=${STAGING_DIR_TARGET}${exec_prefix} --cflags="${CFLAGS}" --bits=${SITEINFO_BITS} --enable-static-sqlite --without-rpath
 	else
-	  ${S}/configure --prefix=${prefix} --libdir=${prefix}/lib/pseudo/lib --with-sqlite=${STAGING_DIR_TARGET}${exec_prefix} --cflags="${CFLAGS}" --bits=${SITEINFO_BITS} --enable-static-sqlite --without-rpath
+	  ${S}/configure --prefix=${prefix} --libdir=${prefix}/lib/pseudo/lib --with-sqlite-lib=${baselib} --with-sqlite=${STAGING_DIR_TARGET}${exec_prefix} --cflags="${CFLAGS}" --bits=${SITEINFO_BITS} --enable-static-sqlite --without-rpath
 	fi
 	oe_runmake ${MAKEOPTS}
 }
@@ -51,7 +51,7 @@ do_compile_prepend_class-native () {
 		# built this will fail and be ignored.
 		make ${MAKEOPTS} distclean || :
 
-		./configure --prefix=${prefix} --libdir=${prefix}/lib/pseudo/lib --with-sqlite=${STAGING_DIR_TARGET}${exec_prefix} --bits=32 --without-rpath
+		./configure --prefix=${prefix} --libdir=${prefix}/lib/pseudo/lib --with-sqlite-lib=${baselib} --with-sqlite=${STAGING_DIR_TARGET}${exec_prefix} --bits=32 --without-rpath
 		oe_runmake ${MAKEOPTS} libpseudo
 		# prevent it from removing the lib, but remove everything else
 		make 'LIB=foo' ${MAKEOPTS} distclean 
@@ -63,7 +63,7 @@ do_compile_prepend_class-nativesdk () {
 		# We need the 32-bit libpseudo on a 64-bit machine...
                 # ... and we really, really, hope that the native host is
                 # x86, or else --bits may not work.
-		./configure --prefix=${prefix} --libdir=${prefix}/lib/pseudo/lib --with-sqlite=${STAGING_DIR_TARGET}${exec_prefix} --bits=32 --without-rpath
+		./configure --prefix=${prefix} --libdir=${prefix}/lib/pseudo/lib --with-sqlite-lib=${baselib} --with-sqlite=${STAGING_DIR_TARGET}${exec_prefix} --bits=32 --without-rpath
 		oe_runmake ${MAKEOPTS} libpseudo
 		# prevent it from removing the lib, but remove everything else
 		make 'LIB=foo' ${MAKEOPTS} distclean 
meta/recipes-devtools/pseudo/pseudo_1.4.1.bb deleted +0 -8
deleted file mode 100644
index 70fe9c0..0000000
@@ -1,8 +0,0 @@
-require pseudo.inc
-
-PR = "r13"
-
-SRC_URI = "http://www.yoctoproject.org/downloads/${BPN}/${BPN}-${PV}.tar.bz2"
-
-SRC_URI[md5sum] = "b49bb87c7e1de33f37fea479ddb99dca"
-SRC_URI[sha256sum] = "ae4bfba2bd1e3954ea8f83bf06571ee4958bf7623e4fa897056281dddfe6446d"
meta/recipes-devtools/pseudo/pseudo_1.4.3.bb new file +8 -0
new file mode 100644
index 0000000..8f25bd0
@@ -0,0 +1,8 @@
+require pseudo.inc
+
+PR = "r0"
+
+SRC_URI = "http://www.yoctoproject.org/downloads/${BPN}/${BPN}-${PV}.tar.bz2"
+
+SRC_URI[md5sum] = "ac943153aa78e210e2d0db7c85845db3"
+SRC_URI[sha256sum] = "0ca12a319c0ee87d1c8b2a4310c36a6d68d8d4b8c9c7dba00bace1773baf18e8"
meta/recipes-devtools/pseudo/pseudo_git.bb +3 -3
index e394ffb..bbdba43 100644
@@ -1,8 +1,8 @@
 require pseudo.inc
 
-SRCREV = "398a264490713c912b4ce465251a8a82a7905f45"
-PV = "1.4.1+git${SRCPV}"
-PR = "r28"
+SRCREV = "a01d7884e5f3acba1460cf6b500d28390e7af9f8"
+PV = "1.4.3+git${SRCPV}"
+PR = "r0"
 
 DEFAULT_PREFERENCE = "-1"
 
Signature · 1 line
1.7.0.4