mgag200: bug fix, cleanup and managed devices
Subsystems (3)
cover mgag200: bug fix, cleanup and managed devices
Patch one is a simple bug fix for G200ER cards.
Patch two doesn't change any code
Patch three makes the mgag200 driver use managed devices where possible. I'm not too sure how to test this one properly, other than to just boot a bunch of boards and stare at the code changes for a long while. Any testing hints are appreciated.
Christopher Harvey (3):
drm/mgag200: Index 24 in extended CRTC registers is 24 in hex, not decimal.
drm: Misc comment cleanup
drm/mgag200: Convert to managed device resources where possible
drivers/gpu/drm/mgag200/mgag200_drv.h | 6 +++--- drivers/gpu/drm/mgag200/mgag200_fb.c | 9 +++------ drivers/gpu/drm/mgag200/mgag200_main.c | 29 +++++------------------------ drivers/gpu/drm/mgag200/mgag200_mode.c | 13 +++---------- include/drm/drm_crtc.h | 2 +- include/uapi/drm/drm_mode.h | 6 +++--- 6 files changed, 18 insertions(+), 47 deletions(-)
Signature · 1 line
1.7.12.4
PATCH 1/3 drm/mgag200: Index 24 in extended CRTC registers is 24 in hex, not decimal.
This change properly enables the "requester" in G200ER cards that is responsible for getting pixels out of memory and clocking them out to the screen.
--- drivers/gpu/drm/mgag200/mgag200_mode.c | 13 +++---------- 1 file changed, 3 insertions(+), 10 deletions(-)
drivers/gpu/drm/mgag200/mgag200_mode.c +3 -10
@@ -751,8 +751,6 @@ static int mga_crtc_mode_set(struct drm_crtc *crtc,int i;unsigned char misc =0 ;unsigned char ext_vga[6 ]; -unsigned char ext_vga_index24; -unsigned char dac_index90 =0 ;u8 bppshift;static unsigned char dacvalue[] = {
@@ -803,7 +801,6 @@ static int mga_crtc_mode_set(struct drm_crtc *crtc, option2 =0x0000b000 ;break ;case G200_ER : - dac_index90 =0 ;break ; }
@@ -852,10 +849,8 @@ static int mga_crtc_mode_set(struct drm_crtc *crtc,WREG_DAC (i, dacvalue[i]); } -if (mdev->type ==G200_ER ) { -WREG_DAC (0x90 , dac_index90); - } - +if (mdev->type ==G200_ER ) +WREG_DAC (0x90 ,0 );if (option)pci_write_config_dword (dev->pdev,PCI_MGA_OPTION , option);
@@ -952,8 +947,6 @@ static int mga_crtc_mode_set(struct drm_crtc *crtc,if (mdev->type ==G200_WB ) ext_vga[1 ] |=0x88 ; - ext_vga_index24 =0x05 ; -/* Set pixel clocks */ misc =0x2d ;WREG8 (MGA_MISC_OUT , misc);
@@ -965,7 +958,7 @@ static int mga_crtc_mode_set(struct drm_crtc *crtc, }if (mdev->type ==G200_ER ) -WREG_ECRT (24 , ext_vga_index24); +WREG_ECRT (0x24 ,0x5 );if (mdev->type ==G200_EV ) {WREG_ECRT (6 ,0 );
Signature · 1 line
1.7.12.4
Re: [PATCH 1/3] drm/mgag200: Index 24 in extended CRTC registers is 24 in hex, not decimal.
Quoted 5 lines · Christopher Harvey
This change properly enables the "requester" in G200ER cards that is responsible for getting pixels out of memory and clocking them out to the screen.
Signed-off-by Christopher Harvey <[email protected]>
Quoted 56 lines
--- drivers/gpu/drm/mgag200/mgag200_mode.c | 13 +++---------- 1 file changed, 3 insertions(+), 10 deletions(-)drivers/gpu/drm/mgag200/mgag200_mode.c +3
-10@@ -751,8 +751,6 @@ static int mga_crtc_mode_set(struct drm_crtc *crtc,int i;unsigned char misc =0 ;unsigned char ext_vga[6 ]; -unsigned char ext_vga_index24; -unsigned char dac_index90 =0 ;u8 bppshift;static unsigned char dacvalue[] = {@@ -803,7 +801,6 @@ static int mga_crtc_mode_set(struct drm_crtc *crtc, option2 =0x0000b000 ;break ;case G200_ER : - dac_index90 =0 ;break ; }@@ -852,10 +849,8 @@ static int mga_crtc_mode_set(struct drm_crtc *crtc,WREG_DAC (i, dacvalue[i]); } -if (mdev->type ==G200_ER ) { -WREG_DAC (0x90 , dac_index90); - } - +if (mdev->type ==G200_ER ) +WREG_DAC (0x90 ,0 );if (option)pci_write_config_dword (dev->pdev,PCI_MGA_OPTION , option);@@ -952,8 +947,6 @@ static int mga_crtc_mode_set(struct drm_crtc *crtc,if (mdev->type ==G200_WB ) ext_vga[1 ] |=0x88 ; - ext_vga_index24 =0x05 ; -/* Set pixel clocks */ misc =0x2d ;WREG8 (MGA_MISC_OUT , misc);@@ -965,7 +958,7 @@ static int mga_crtc_mode_set(struct drm_crtc *crtc, }if (mdev->type ==G200_ER ) -WREG_ECRT (24 , ext_vga_index24); +WREG_ECRT (0x24 ,0x5 );if (mdev->type ==G200_EV ) {WREG_ECRT (6 ,0 );
Signature · 5 lines
Mathieu Larouche Ing./Eng. Software Designer Matrox Graphics Inc. Phone : 514 822-6000 x7905 Email : [email protected]
PATCH 2/3 drm: Misc comment cleanup
In reply to Christopher Harvey--- drivers/gpu/drm/mgag200/mgag200_drv.h | 6 +++--- include/drm/drm_crtc.h | 2 +- include/uapi/drm/drm_mode.h | 6 +++--- 3 files changed, 7 insertions(+), 7 deletions(-)
drivers/gpu/drm/mgag200/mgag200_drv.h +3 -3
@@ -215,7 +215,7 @@ mgag200_bo(struct ttm_buffer_object *bo) { return container_of(bo, struct mgag200_bo, bo); } -/* mga_crtc.c */ +/* mgag200_crtc.c */ void mga_crtc_fb_gamma_set (struct drm_crtc *crtc,u16 red,u16 green,u16 blue,int regno); void mga_crtc_fb_gamma_get(struct drm_crtc *crtc, u16 *red, u16 *green,
@@ -225,7 +225,7 @@ void mga_crtc_fb_gamma_get(struct drm_crtc *crtc, u16 *red, u16 *green,int mgag200_modeset_init (struct mga_device *mdev);void mgag200_modeset_fini (struct mga_device *mdev); -/* mga_fbdev.c */ +/* mgag200_fb.c */ int mgag200_fbdev_init (struct mga_device *mdev);void mgag200_fbdev_fini (struct mga_device *mdev);
@@ -254,7 +254,7 @@ mgag200_dumb_mmap_offset(struct drm_file *file,struct drm_device *dev, uint32_t handle, uint64_t *offset); -/* mga_i2c.c */ +/* mgag200_i2c.c */ struct mga_i2c_chan *mgag200_i2c_create (struct drm_device *dev);void mgag200_i2c_destroy (struct mga_i2c_chan *i2c);
include/drm/drm_crtc.h +1 -1
@@ -310,7 +310,7 @@ struct drm_plane;* drm_crtc_funcs - control CRTCs for a given device * @save: save CRTC state * @restore: restore CRTC state -* @reset: reset CRTC after state has been invalidate (e.g. resume) +* @reset: reset CRTC after state has been invalidated (e.g. resume) * @cursor_set: setup the cursor * @cursor_move: move the cursor * @gamma_set: specify color ramp for CRTC
include/uapi/drm/drm_mode.h +3 -3
@@ -367,13 +367,13 @@ struct drm_mode_mode_cmd {* depending on the value in flags different members are used. * * CURSOR_BO uses -* crtc +* crtc_id * width * height -* handle - if 0 turns the cursor of +* handle - if 0 turns the cursor off * * CURSOR_MOVE uses -* crtc +* crtc_id * x * y */
Signature · 1 line
1.7.12.4
PATCH 3/3 drm/mgag200: Convert to managed device resources where possible
In reply to Christopher Harvey--- drivers/gpu/drm/mgag200/mgag200_fb.c | 9 +++------ drivers/gpu/drm/mgag200/mgag200_main.c | 29 +++++------------------------ 2 files changed, 8 insertions(+), 30 deletions(-)
drivers/gpu/drm/mgag200/mgag200_fb.c +3 -6
@@ -246,7 +246,7 @@ int mgag200_fbdev_init(struct mga_device *mdev)struct mga_fbdev *mfbdev;int ret; - mfbdev =kzalloc (sizeof (struct mga_fbdev ),GFP_KERNEL ); + mfbdev =devm_kzalloc (mdev->dev->dev,sizeof (struct mga_fbdev ),GFP_KERNEL );if (!mfbdev)return -ENOMEM ;
@@ -255,10 +255,9 @@ int mgag200_fbdev_init(struct mga_device *mdev) ret =drm_fb_helper_init (mdev->dev, &mfbdev->helper, mdev->num_crtc,MGAG200FB_CONN_LIMIT ); -if (ret) { -kfree (mfbdev); +if (ret)return ret; - } +drm_fb_helper_single_add_all_connectors (&mfbdev->helper);/* disable all the possible outputs/crtcs before entering KMS mode */
@@ -275,6 +274,4 @@ void mgag200_fbdev_fini(struct mga_device *mdev)return ;mga_fbdev_destroy (mdev->dev, mdev->mfbdev); -kfree (mdev->mfbdev); - mdev->mfbdev =NULL ; }
drivers/gpu/drm/mgag200/mgag200_main.c +5 -24
@@ -80,15 +80,6 @@ static const struct drm_mode_config_funcs mga_mode_funcs = { .fb_create = mgag200_user_framebuffer_create, }; -/* Unmap the framebuffer from the core and release the memory */ -static void mga_vram_fini (struct mga_device *mdev) -{ -pci_iounmap (mdev->dev->pdev, mdev->rmmio); - mdev->rmmio =NULL ; -if (mdev->mc.vram_base) -release_mem_region (mdev->mc.vram_base, mdev->mc.vram_window); -} -static int mga_probe_vram (struct mga_device *mdev,void __iomem *mem) {int offset;
@@ -144,7 +135,7 @@ static int mga_vram_init(struct mga_device *mdev)remove_conflicting_framebuffers (aper,"mgafb" , true);kfree (aper); -if (!request_mem_region (mdev->mc.vram_base, mdev->mc.vram_window, +if (!devm_request_mem_region (mdev->dev->dev, mdev->mc.vram_base, mdev->mc.vram_window,"mgadrmfb_vram" )) {DRM_ERROR ("can't reserve VRAM\n" );return -ENXIO ;
@@ -177,13 +168,13 @@ static int mgag200_device_init(struct drm_device *dev, mdev->rmmio_base =pci_resource_start (mdev->dev->pdev,1 ); mdev->rmmio_size =pci_resource_len (mdev->dev->pdev,1 ); -if (!request_mem_region (mdev->rmmio_base, mdev->rmmio_size, +if (!devm_request_mem_region (mdev->dev->dev, mdev->rmmio_base, mdev->rmmio_size,"mgadrmfb_mmio" )) {DRM_ERROR ("can't reserve mmio registers\n" );return -ENOMEM ; } - mdev->rmmio =pci_iomap (dev->pdev,1 ,0 ); + mdev->rmmio =pcim_iomap (dev->pdev,1 ,0 );if (mdev->rmmio ==NULL )return -ENOMEM ;
@@ -192,10 +183,8 @@ static int mgag200_device_init(struct drm_device *dev, mdev->reg_1e24 =RREG32 (0x1e24 ); ret =mga_vram_init (mdev); -if (ret) { -release_mem_region (mdev->rmmio_base, mdev->rmmio_size); +if (ret)return ret; - } mdev->bpp_shifts[0 ] =0 ; mdev->bpp_shifts[1 ] =1 ;
@@ -204,12 +193,6 @@ static int mgag200_device_init(struct drm_device *dev,return 0 ; } -void mgag200_device_fini (struct mga_device *mdev) -{ -release_mem_region (mdev->rmmio_base, mdev->rmmio_size); -mga_vram_fini (mdev); -} -/* * Functions here will be called by the core once it's bound the driver to * a PCI device
@@ -221,7 +204,7 @@ int mgag200_driver_load(struct drm_device *dev, unsigned long flags)struct mga_device *mdev;int r; - mdev =kzalloc (sizeof (struct mga_device ),GFP_KERNEL ); + mdev =devm_kzalloc (dev->dev,sizeof (struct mga_device ),GFP_KERNEL );if (mdev ==NULL )return -ENOMEM ; dev->dev_private = (void *)mdev;
@@ -265,8 +248,6 @@ int mgag200_driver_unload(struct drm_device *dev)mgag200_fbdev_fini (mdev);drm_mode_config_cleanup (dev);mgag200_mm_fini (mdev); -mgag200_device_fini (mdev); -kfree (mdev); dev->dev_private =NULL ;return 0 ; }
Signature · 1 line
1.7.12.4