Skip to contentSkip to conversation

Some builds (ipk, multilib) and one fix

PATCH New Stefan Stanacar 1 participant 5 messages May 8, 2013

lore
Share & tools
lore
#0 lore raw

cover Some builds (ipk, multilib) and one fix

The following changes since commit fd74be794035a2c73b206c3ca4dd4c45005037a5:

CreateAutoConf.py (2013-05-07 09:00:49 -0700)

are available in the git repository at:

git://git.yoctoproject.org/poky-contrib stefans/yab2
http://git.yoctoproject.org/cgit.cgi/poky-contrib/log/?h=stefans/yab2

Stefan Stanacar (4):
buildsets: add some more builds
nightly-multilib: remove Publish steps
PublishLayerTarballs.py: fix command overwrite
PublishLayerTarballs.py: Cleanup spacing

 buildset-config/nightly-multilib.conf                | 13 +++++++++----
 buildset-config/nightly-qa-extras.conf               |  3 ++-
 buildset-config/nightly-x32.conf                     |  4 ++--
 .../autobuilder/buildsteps/PublishLayerTarballs.py   | 20 ++++++++++----------
 4 files changed, 23 insertions(+), 17 deletions(-)
Signature · 1 line
1.8.1.4
#1 lore raw

PATCH 1/4 buildsets: add some more builds

Let's put to good use the new packages option, by adding some ipk builds to multilib target. Also let's enable sanity tests for more images.

---
 buildset-config/nightly-multilib.conf  | 9 ++++++++-
 buildset-config/nightly-qa-extras.conf | 3 ++-
 buildset-config/nightly-x32.conf       | 4 ++--
 3 files changed, 12 insertions(+), 4 deletions(-)
buildset-config/nightly-multilib.conf +8 -1
index f9ae8b7..79d0011 100644
@@ -15,10 +15,17 @@ steps: [{'SetDest':{}},
         {'CreateAutoConf': {'machine': 'qemux86-64', 'SDKMACHINE' : 'x86_64', 'multilib': True, 'distro': 'poky'}},
         {'CreateBBLayersConf': {'buildprovider' : 'yocto'}},
         {'BuildImages': {'images': 'lib32-core-image-minimal'}},
+        {'RunSanityTests': {'images': 'lib32-core-image-minimal', 'scene' : 'sanity:boot'}},
+        {'CreateAutoConf': {'machine': 'qemux86-64', 'SDKMACHINE' : 'x86_64', 'multilib': True, 'distro': 'poky', 'packages' : 'ipk'}},
+        {'BuildImages': {'images': 'lib32-core-image-minimal'}},
+        {'RunSanityTests': {'images': 'lib32-core-image-minimal', 'scene' : 'sanity:boot'}},
         {'CreateAutoConf': {'machine': 'qemux86-64', 'SDKMACHINE' : 'x86_64', 'multilib': 'lib32', 'distro': 'poky', 'atextappend' : '\nIMAGE_INSTALL_append = " lib32-connman-gnome"\n'}},
         {'BuildImages': {'images': 'core-image-sato'}},
+        {'RunSanityTests': {'images': 'core-image-sato'}},
+        {'CreateAutoConf': {'machine': 'qemux86-64', 'SDKMACHINE' : 'x86_64', 'multilib': 'lib32', 'distro': 'poky', 'packages' : 'ipk', 'atextappend' : '\nIMAGE_INSTALL_append = " lib32-connman-gnome"\n'}},
+        {'BuildImages': {'images': 'core-image-sato'}},
+        {'RunSanityTests': {'images': 'core-image-sato'}},
         {'CreateAutoConf': {'machine': 'qemux86', 'SDKMACHINE' : 'i686', 'multilib': 'lib64', 'distro': 'poky'}},
         {'BuildImages': {'images': 'lib64-core-image-sato lib64-core-image-sato-sdk lib64-core-image-lsb-sdk'}},
         {'PublishLayerTarballs':{}},
         {'PublishArtifacts': {'artifacts': ['qemux86-64']}}]
-
buildset-config/nightly-qa-extras.conf +2 -1
index 4098f53..c3af24c 100644
@@ -13,4 +13,5 @@ steps: [{'SetDest':{}},
         {'BuildImages': {'images': 'core-image-sato'}},
         {'RunSanityTests': {'images': 'core-image-sato'}},
         {'CreateAutoConf': {'machine': 'qemux86-64', 'SDKMACHINE' : 'i686', 'distro': 'poky', 'atextappend' : '\nEXTRA_IMAGE_FEATURES = "debug-tweaks read-only-rootfs"\n'}},
-        {'BuildImages': {'images': 'core-image-sato'}}]
+        {'BuildImages': {'images': 'core-image-sato'}},
+        {'RunSanityTests': {'images': 'core-image-sato', 'scene' : 'sanity:boot sanity:ssh sanity:dmesg'}}]
buildset-config/nightly-x32.conf +2 -2
index b0b5b4f..636b1c3 100644
@@ -15,5 +15,5 @@ steps: [{'SetDest':{}},
         {'CreateAutoConf': {'machine': 'qemux86-64', 'SDKMACHINE' : 'x86_64', 'x32': True, 'distro': 'poky'}},
         {'CreateBBLayersConf': {'buildprovider' : 'yocto'}},
         {'PublishLayerTarballs':{}},
-        {'BuildImages': {'images': 'core-image-minimal core-image-sato'}}]
-
+        {'BuildImages': {'images': 'core-image-minimal core-image-sato'}},
+        {'RunSanityTests': {'images': 'core-image-minimal core-image-sato'}}]
Signature · 1 line
1.8.1.4
#2 lore raw

PATCH 2/4 nightly-multilib: remove Publish steps

In reply to Stefan Stanacar

Save some space by removing Publish steps, I think nobody downloads the multilib images from AB.

---
 buildset-config/nightly-multilib.conf | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)
buildset-config/nightly-multilib.conf +1 -3
index 79d0011..bdb0193 100644
@@ -26,6 +26,4 @@ steps: [{'SetDest':{}},
         {'BuildImages': {'images': 'core-image-sato'}},
         {'RunSanityTests': {'images': 'core-image-sato'}},
         {'CreateAutoConf': {'machine': 'qemux86', 'SDKMACHINE' : 'i686', 'multilib': 'lib64', 'distro': 'poky'}},
-        {'BuildImages': {'images': 'lib64-core-image-sato lib64-core-image-sato-sdk lib64-core-image-lsb-sdk'}},
-        {'PublishLayerTarballs':{}},
-        {'PublishArtifacts': {'artifacts': ['qemux86-64']}}]
+        {'BuildImages': {'images': 'lib64-core-image-sato lib64-core-image-sato-sdk lib64-core-image-lsb-sdk'}}]
Signature · 1 line
1.8.1.4
#3 lore raw

PATCH 3/4 PublishLayerTarballs.py: fix command overwrite

In reply to Stefan Stanacar

command was overwritten, so the gzip archive was missing.
Also add a trailing slash to the second git archive prefix otherwise we end up with dirs like poky-revscripts instead of poky-rev/scripts.

---
 .../site-packages/autobuilder/buildsteps/PublishLayerTarballs.py      | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
lib/python2.7/site-packages/autobuilder/buildsteps/PublishLayerTarballs.py +2 -2
index 2930d28..6f676be 100644
@@ -44,8 +44,8 @@ class PublishLayerTarballs(ShellCommand):
         command = " git archive --format=tar HEAD "
         command = command + "--prefix=" + self.layername + "-" + revision + "/"
         command = command  +"| gzip > " + self.layername + "-" + revision + ".tar.gz; " 
-        command = " git archive --format=tar HEAD "
-        command = command + "--prefix=" + self.layername + "-" + revision 
+        command = command + " git archive --format=tar HEAD "
+        command = command + "--prefix=" + self.layername + "-" + revision + "/"
         command = command  +"| bzip2 -c > " + self.layername + "-" + revision + ".tar.bz2; " 
         command = command  +"md5sum " + self.layername + "-" + revision + ".tar.bz2 >> "
         command = command  + self.layername + "-" + revision + ".tar.bz2.md5sum; "
Signature · 1 line
1.8.1.4
#4 lore raw

PATCH 4/4 PublishLayerTarballs.py: Cleanup spacing

In reply to Stefan Stanacar

No changes, just formating/spacing.

---
 .../autobuilder/buildsteps/PublishLayerTarballs.py       | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)
lib/python2.7/site-packages/autobuilder/buildsteps/PublishLayerTarballs.py +8 -8
index 6f676be..4a94b67 100644
@@ -43,15 +43,15 @@ class PublishLayerTarballs(ShellCommand):
                                     self.slavedir, buildername), self.workdir))
         command = " git archive --format=tar HEAD "
         command = command + "--prefix=" + self.layername + "-" + revision + "/"
-        command = command  +"| gzip > " + self.layername + "-" + revision + ".tar.gz; " 
+        command = command + " | gzip > " + self.layername + "-" + revision + ".tar.gz; "
         command = command + " git archive --format=tar HEAD "
         command = command + "--prefix=" + self.layername + "-" + revision + "/"
-        command = command  +"| bzip2 -c > " + self.layername + "-" + revision + ".tar.bz2; " 
-        command = command  +"md5sum " + self.layername + "-" + revision + ".tar.bz2 >> "
-        command = command  + self.layername + "-" + revision + ".tar.bz2.md5sum; "
-        command = command  +"md5sum " + self.layername + "-" + revision + ".tar.gz >> "
-        command = command  + self.layername + "-" + revision + ".tar.gz.md5sum; " 
-        command=command + "mkdir -p " + DEST + "; rsync -av " 
-        command=command + self.layername + "-" + revision +".tar.* " + DEST
+        command = command + " | bzip2 -c > " + self.layername + "-" + revision + ".tar.bz2; "
+        command = command + "md5sum " + self.layername + "-" + revision + ".tar.bz2 >> "
+        command = command + self.layername + "-" + revision + ".tar.bz2.md5sum; "
+        command = command + "md5sum " + self.layername + "-" + revision + ".tar.gz >> "
+        command = command + self.layername + "-" + revision + ".tar.gz.md5sum; "
+        command = command + "mkdir -p " + DEST + "; rsync -av "
+        command = command + self.layername + "-" + revision +".tar.* " + DEST
         self.command=command
         ShellCommand.start(self)
Signature · 1 line
1.8.1.4